Over 1 million tech questions and answers.

Dell monitor E177FPb - Could not connect with Satellite Receiver through HDMI to VGA converter

Q: Dell monitor E177FPb - Could not connect with Satellite Receiver through HDMI to VGA converter

Dear All,
I am using E177FPb monitor quite long time. Since i have a satellite receiver which has HDMI output. Planned to connect the same to my monitor. Purchased HDMI to VGA converter, connected, monitor giving error message " CANNOT DISPLAY THIS VIDEO MODE Optimum resolution 1280 x 1024 60Hz". Tried with other LG LED monitor, working fine. Tried the below steps as per advice from few sites. No luck.
1. Tried to change the setting of monitor through laptop, no luck.

FYI
My Sat receiver giving output format as 720P.
Hope you understand my concern, expecting the solution.

Best Regards
K.Neelakandan.

RELEVANCY SCORE 200
Preferred Solution: Dell monitor E177FPb - Could not connect with Satellite Receiver through HDMI to VGA converter

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Dell monitor E177FPb - Could not connect with Satellite Receiver through HDMI to VGA converter

720P is 1280 x 720 75Hz your monitor does not support that. 1280 x 1024 60hz interlaced is max. This monitor is over 10 years old.

Read other 2 answers
RELEVANCY SCORE 87.2

Hi Dell Community,
Please help me to diagnose what is wrong with my new laptop.
My Laptop is Dell Latitude E6440 but every time i connect external monitor to my laptop HDMI port via HDMI to VGA converter, the external monitor always blink randomly every couple of seconds. This HDMI to VGA converter is working fine when i used it to other laptop.
Currently i still don't have chance to try my laptop HDMI port to connect directly to HDMI monitor because i don't have it.
Are there anybody have the same problem with me? thanks for your help.

A:Latitude E6440 display blink when connect to external monitor via hdmi to VGA converter

Hi M. Zemmy Indrapatih,
Thanks for your post.
Sorry you are having difficulties with your laptop and monitor.  If you could send me the name and model cable adapter you are using and the name and model of the monitor,  I might be better able to understand the issue.  Thanks
Regards,Robert

Read other 16 answers
RELEVANCY SCORE 81.2

Hello there if your reading this thread,
Recently I got my old laptop out of my loft and it had a broken screen but working perfectly before. Today I tried to connecting it to a external monitor via hdmi and it didn't work and I tried vga as well and it didn't work. I wanted it by HDMi because it's high definition, I need some help trying to connect it to the monitor. I tried connecting it to other monitors however it still didn't work. This is the first time I attempt to connect this laptop to a monitor. The model name is Satellite C50D-B-120.
If you have a solution please comment it here or (I'm sorry to waste your time) contact me on Skype : matinadams123

thanks for reading,
matin

Read other answers
RELEVANCY SCORE 74.8

Hi,

So eagerly i tought to buy this cool looking laptop for a huge $2000 i needed it to output to a hdmi monitor ot TV so sometimes i could see movies as well, now i had to buy the special DA200 dell adaptor and in the past 3 weeks it`s been a complete nightmare, i WAS NEVER ABLE to make it work permanently. The chat support was no help at all usually simply resuming to try and replace the part but i do think the part is good and i didn't feel like waiting 2 weeks for it to ship from china.

The ethernet and usb work on the DA200 adaptor , EXCEPT HDMI.  SOMETIMES it would work briefly until next restart, i had tried everything ever available on the internet. The laptop is running Windows 10 (as it`s restricted to that version, i tried to install other versions with lots of issues and compatibility issues) so  i have installed reinstalled and installed different versions of the video driver for all possible windowses and none worked. what did work was very brief until next restart and that usually happened when i had a fresh windows install, after the first restart i will get a non working hdmi again.  

I have tried several hdmi cables so i know it`s not the hdmi cable or the tv ot the monitor. and nobody seems to be able to help!!

A:dell xps 13 9450 (2015 new version) does not output HDMI to tv or monitor via special dell DA200 Hdmi adaptor

Oops I see my first post got sent, even if the website failed...
Anyay.. I talked to Dell Support and they told me to update the firmware for:
Intel (R) Thunderbolt 3 Firmware Update
(version 02.05.04,A00)
downloaded forn Dell.com/support
Enter your service tag and you will find it under Chipset on the driver download page.
That fixed it for me!
It was a known issue for the guy i talked to.

Read other 9 answers
RELEVANCY SCORE 73.6

Hope this time my problem will solve as soon as possible.I connect my laptop use VGA-Converter-HDMI to my TV.But No audio. I read so article ask to change to hdmi audio at playback device.Unfortunately my playback device only show : SpeakersRealteck High Definition AudioDefault Device No HDMI Audio to select. P/S: I still cannot attach picture in my post event already report for last 4 month..Rubbish..

Read other answers
RELEVANCY SCORE 69.6

My XPS 8700 doesnt have a NVidia HDMI port. What  are my options to fix this if I want to connect to my monitor using an HDMI cable (without using adapters of course)? Is there a way to connect to my monitor via the HDMI port located in the middle left of the model? What is the latter HDMI port used for if it cant  connect to a tv/pc monitor? 

Read other answers
RELEVANCY SCORE 67.6

I have a video card with both a DVI and an HDMI output and a monitor with only an HDMI input. Should I connect my monitor to my PC with an HDMI cable or with a DVI - HDMI cable?

A:Should I use an HDMI or HDMI-DVI cable to connect to my monitor?

Hdmi

Read other 4 answers
RELEVANCY SCORE 66.8

Until 2 wks ago was able to connect laptop to tv with hdmi lead

now laptop does'nt connect laptop shows a connection tv says no signal

I have tried reinstalling drivers

Help

Read other answers
RELEVANCY SCORE 65.6

If I use either F4/the windows key + P and select duplicate or PC screen only (or any other option) and then plug it into the TV, both the laptop screen and the TV screen are blank. Pressing any key does not bring up anything on my laptop screen, then when I unplug the HDMI cable it comes up with the second screen only option highlighted. My laptop strangely ignores what I click and constantly reverts back to this option and alas, I cannot project the screen onto any monitor (I have tried 4 separate monitors).

My laptop previously was able to be plugged into a TV and I have done this numerous times but as far as I'm aware this stopped when I had a windows 8.1 update (my assumption, I'm not sure). I have searched the web for solutions and none have worked. I have tried the method of detecting the monitor via the screen resolution option on the desktop, but again this can't be done because I can't see anything on either screen when my laptop is plugged into any TV, and I have tried countless times.

Any help is appreciated

Thanks a lot

A:Satellite Pro C850-1K3 cannot connect to a TV via a HDMI cable

I use Toshiba notebooks few years now and what I can say is that you must connect your notebook to the TV at first, enable the right port on the TV and then use FN or F key to change between notebooks desktop and connected TV.
Connected TV or other external device must be detected at first.

Please test it one more time.

Read other 1 answers
RELEVANCY SCORE 64.4

Hi, I can't seem to get anything higher than 1920x1080 in the list of available resolution options when I connect my Dell U2713HM monitor to my Dell Inspiron 15 laptop. I've run this monitor at 2560x1440 on another laptop over HDMI in the past but that was with Windows 8. The Intel HD Graphics 530 Control Panel doesn't offer any resolutions above 1920x1080 for the external monitor and adding custom resolutions results in the error "the custom resolution exceeds the maximum bandwidth capacity". I'm using the same high speed HDMI cable that worked at 2560x1440 with this monitor on my previous laptop. I'm fully up to date on all of the drivers for the laptop.
Does anyone have any suggestions? I'm not sure what else to try. Could this be a Windows 10 issue? Should I try the standard Intel HD Graphics 530 drivers from the Intel website?

Read other answers
RELEVANCY SCORE 64.4

Hello, 
I have been looking for verification that if I buy the Dell 24 Gaming Monitor – S2417DG and attach it to my Inspiron 15 Gaming 7567 HDMI that I will get full 2560x1440 resolution refresh rate 165 Hz with 1ms response as the Monitor specs are listed.
I can find no information that the HDMI will pass this level of output.
I have talked to Dell tech support and they do say that the HDMI port is connected directly to the  NVIDIA  GeForce GTX 1050T i with 4GB GDDR5 but I also have seen information that HDMI will not support this.
So I am looking for verification on this configuration being compatible/able to output the full capabilities of the video card to the monitor via the on board HDMI output?

A:Inspiron 15 Gaming 7567 HDMI Specs/Does HDMI out support full bandwidth for G-SYNC Dell Gaming Monitor – S2417DG

First of all, G-Sync as far as I know requires DisplayPort and will not run on HDMI.  Even if it does, I don't think even HDMI 2.0 has enough bandwidth for 1440p @ 165 Hz.  And even if it does though, all of the Dell systems I've seen have only had HDMI 1.4, which is only enough for 1440p @ 60 Hz.  But even if all of that isn't a problem, does the Inspiron 7567 have ONLY a GeForce GPU, or does it have an Intel GPU plus a GeForce GPU?  If it's the latter, G-Sync will definitely not work because in almost all systems that have both GPUs, only the Intel GPU is directly wired to the display outputs.  If your system has ONLY the GeForce GPU, then G-Sync should work in theory, but again you may have the bandwidth problems I mentioned above.

Read other 5 answers
RELEVANCY SCORE 64

I am plugging a HDMI cable into the HDMI port on a Dell E5440 laptop and the other end of the cable, which is Display Port, into a Dell P1914S monitor.
Nothing shows on the external monitor no matter what I do or try on either the laptop or monitor?  I have tried this on a Dell E7000 series laptop also with no result on that one either?
Does the HDMI port on Dell laptops support video or do I need to utilise some other means of connecting a second monitor.  Bear in mind there is no VGA output on these laptops.
Thanks in advance
Wayne

A:Dell Laptop HDMI to Dell Monitor DisplayPort?

Display port is NOT bidirectional. You can go from DISPLAY PORT OUT to HDMI IN but you CANNOT GO HDMI OUT to DIsplay port in.
I would suggest an HDMI to VGA adapter.
https://www.amazon.com/View-Hdmi-Converter-Raspberry-Board/dp/B00F04N28I
 

Read other 2 answers
RELEVANCY SCORE 63.6

Does anyone have a clue if it is possible to run an ultrawide 3440x1440 monitor via P50 HDMI port.

I have dual graphics - AMD RADEON R9 M265x and INTEL HD 4600. Not sure which one does the HDMI output on the p50-b. I think the Radeon has 2gb DDR5 if this is important.

I am not planing on playing games, I would like the wide screen for productivity - word, spreadsheets, drawings, charts, diagrams etc. - multitasking.

Read other answers
RELEVANCY SCORE 63.6

Hello everybody,

I just bought a "half" of an U920T: a laptop without the display(which was literally ripped off, you could see the bent hinges and what is left of the cable).
It's a great piece of hardware and I can use it with an external monitor, thanks to the HDMI connection.

What is the problem?
I only get video signal on the HDMI display, when windows(10) is loaded.

What do I want?
I would very much like to access the bios settings and set the primary output to HDMI, if possible.

I have already tried:
- removed the display cable from the mainboard
- using the F4 and the Fn+F4 to switch between displays. (it only works in windows)
- using the Toshiba System Settings Windows App. (there is no "video output" setting there)

Would any of you who have a similar model be so kind as to:
1. Check their bios to see if the option is available?
2. Upload a picture with the location of this setting in bios, or even better a video?

Thank you!!
Stefan

Read other answers
RELEVANCY SCORE 62.8

Can I connect a 2nd Monitor or TV to the HDMI output on the AZC-700G-UW61 and use Dual Display mode in Windows 10 so I can see my desktop on both the Acer All-in-one and the 2nd monitor?

Read other answers
RELEVANCY SCORE 62.8

hi someone can help me out to connect external monitor with hdmi cable.
 
i have tried a lot and coudln't success to connect.
 
please share any setting s in bios or display settings
 
Moderator note: off-topic post moved to its own thread.  Subject edited to match content.  Was:  Re: Using X1 Carbon USB-C for monitor?

Read other answers
RELEVANCY SCORE 62.8

My laptop is S540 (Type 20B3). In order to connect a second external monitor, I would like to use the USB 3 port. However I cannot make a connetion. Could anyone tell me what I am probably doing wrong? Thanks in advance.

Read other answers
RELEVANCY SCORE 62

My HP 2210m monitor won't connect via HDMI. When anything (multiple devices and cords have been tried) it either won't recognize that anything is connected or it will continually blink in and out or turn purple with no sound. Please help of possible!!

Read other answers
RELEVANCY SCORE 62

Brand new mac mini. Want to use HDMI, but when I connect cable, boot up mac and turn on Monitor, the mac starts to go into new product mode, then quickly picture switches to 2 alternating graphic pictures of what looks to be 2 different computers. I gather this means monitor is looking for a suitable source?? By way of a test of the monitor, I hooked it up to a Macbook Pro using DVI and it worked fine. Just no luck with the HDMI. Thanks for any help.

Read other answers
RELEVANCY SCORE 62

Hey, I'm going to be headed off to college soon, and I'm switching from my old desktop to a new Razer Blade 2014, I am planning on still bringing my 2nd monitor to college and want to use it in my dorm room, My Monitor does not have a HDMI, but that is the only port on my Laptop. I thought this would be simple, because I was already running a HDMI to DVI-D on my desktop to my GTX 770 graphics card. While connected to my desktop, the monitor works normally. When I plug it into my laptop, I get nothing in response, The laptop will not detect the Monitor in screen resolution or in control panel. My monitor is a LG Flatron and my laptop is the Razer Blade 2014. I don't understand why it doesn't just plug and play like it did on my PC. Any help? Also, I am on windows 10 but the problem happened on Windows 8.1 aswell
 

A:Laptop will not connect to second monitor via HDMI

Has it ever worked? You may want to test using a different monitor and a true HDMI to HDMI cable, just to verify the laptop port functions properly.
 

Read other 2 answers
RELEVANCY SCORE 62

Hey guys, I just redesigned my room and a monitor (1080p, 60hz) has moved. I could buy a 25ft HDMI cable and have a cable nightmare, or the more optimal situation of having the monitor attached to the wall with the only cable being it's power/wireless dongle.

Keep in my I have a good home theater/gaming system with nice speakers and I really need to use the speakers, not the ones that come with the monitor (really poor quality)

So.. the first thing I thought of was Chromecast. I ran into the problem of only having ethernet (no wireless) on my desktop. I will buy a card tomorrow/monday to enable wifi on my desktop. Until then, I tried using my phone with Chromecast. Works very well, however it's using the monitors horrid speakers. How would I get around this? Would the Chromecast not be adequate? Thanks for the help.

Am using Windows 10, Chromecast non ultra, 1080p 60hz HDMI monitor.
 

A:Trying to connect an HDMI monitor wirelessly.

If the TV outputs to the speakers, then it should work fine.
 

Read other 1 answers
RELEVANCY SCORE 62

Hello. I use Windows Vista on a nearly 6 year old Acer Aspire 5930.

My old monitor stopped working, so I borrowed one from a friend. That will connect through VGA(my old cable), but for some reason everything got a greenish look, impossible to use for anything besides reading.

So I also borrowed his HDMI-cable. I connect them both, it makes the sound indicating it's connected, but nothing happens. If I have both VGA/HDMI at the same time the VGA works. If I remove VGA it won't work. I've tried numerous different combinations of this.

I've tried the Fn+F5 thing. Only works with the VGA.

Tried rebooting it, both with VGA and HDMI connected. Same result.

I'm fairly certain I've connected this pc to a tv 2 years ago, but then the sound didn't work, but the visual was working fine.

I've cracked the screen on the laptop. Everything I've been trying I've done with VGA connected.

The video driver is up to date.

The monitor is definitely working on a different pc. The VGA is probably working. My old monitor died due to power failure(It just turned off and won't come back on) so there's no reason to believe the VGA-cable isn't broken either.

A:Won't connect laptop to monitor with HDMI

This is one old box and I'd suggest that the integrated video chip is nearly dead or at least the HDMI aspect of it is.

Read other 1 answers
RELEVANCY SCORE 62

Hello all,


I have a quick question. My new graphics card has a HDMI port and I was wondering if there is any advantage of using that port to connect my graphics card to my monitor over the normal DVI port? Is it worth buying the cable that I would need to do this>

many thanks,

A:Use HDMI or DVI to connect monitor to computer.

The only difference is HDMI carries audio and video and DVI carries Video only.

Read other 9 answers
RELEVANCY SCORE 62

Hi all,

I'm a bit desperate so I came here hoping to find some answers.

So I wanted to connect a second monitor (which is a TV screen) to my PC to watch movies, but suddenly my PC wont send any signal to my TV, so I tried connecting all kinds of HDMI cables to all kind of TVs/monitors laying around in the house, and my conclusion is that whenever I tried to connect a second monitor with HDMI directly to my PC it wont show anything and it also doesn't show up in my Display settings on my PC. So from what I can tell the problem lays with the PC itself (within windows probably).

I have up to date display drivers so that is not the problem.

Also something worth mentioning is that my main PC monitor is connected with DVI, and the DVI connector works just fine on every device.

Hope someone can help me find an answer soon!

Read other answers
RELEVANCY SCORE 62

Hi - I am not able to connect an external screen to the laptop. Nothing happens when I connect the screen to the laptop. Screen says: no signal. Laptop does nothing. Mirring says didn't found another screen. Might be realted:Ther is an error in Device Manager: ISB-IF xHCI USB Host Controller has an exlamation mark in a yellow triangle. Thanks,Zoltan 




Zoltan

Read other answers
RELEVANCY SCORE 62

hihow can i connect (hdmi + vga) monitor toghether to e531?

Read other answers
RELEVANCY SCORE 61.6

I just purchased this from Dell directly. I am unable to get the proper resolution for this monitor. I wanted to run the setup at D:\drivers\setup.exe and I get this error

"Please check if Dell 3007WFP is Plug-In!"

Well, it IS plugged in and powered on. I see my desktop there (I have it set to duplicate view between my laptop and this monitor). The other problem is that Vista is showing it at 1280x800 max resolution. However, my laptop video card is Nvidia 8400M GT which supports the maximum resolution of this monitor.

I'm using this cable:
http://www.amazon.com/Cables-Unlimi...1?ie=UTF8&s=electronics&qid=1196726006&sr=8-1

I am unable to install the driver because of the above error. I'm using Vitsa 64bit Ultimate. Please help me out.

Nothing happens when I press + or - as well. I ran this file and rebooted, but see no changes:

D:\drivers\3007wfp\Vista\3007wfp64.exe

Dell has no drivers to download at all: http://support.dell.com/support/dow...emID=LCD_TV_W3007&os=WW1&osl=en&catid=&impid=

I was told on Dell's forums this:
The video card port that the monitor is connect to must be a DVI-D Dual Link connector to get 2560x1600. If not, you will only get 1280x800.Click to expand...

My Sony laptop only has an hdmi port, not DVI.

How can I work around this? I don't see why it should not work. It worked
fine on my 22" samsung (hdmi to dvi).

Would this adapter help at all?
http://www.staples.com/webapp/wcs/s..... Read more

A:need dell monitor help with dvi/hdmi

I was told that I need a dual link dvi cable.

http://www.cablestogo.com/product.asp?cat_id=3308&sku=40288

Is this good? Its a dual link dvi, but not sure about the hdmi. How do I know what type hdmi port my Sony laptop has? Their site does not mention anything about this and I won't bother asking their lame support.

Someone on Dell's forum said the hdmi has to be dual link as well (29 pin).
 

Read other 1 answers
RELEVANCY SCORE 61.6

So I connected my Dell laptop to my LG LCD TV for the first time via an HDMI to HDMI cable, and it worked great. The next time I attempted to do this, my TV displayed "no signal" on every hdmi input. I've tried updating drivers and using the tool that is partnered with my graphics card to appoint the TV as the primary monitor, but I've gotten nothing.

Both the laptop and TV recognize that the HDMI cable has been inserted, but it won't show me a picture or give off any sound. Help!

Craig
Dell Inspiron 1525
OS Version: Microsoft® Windows Vista™ Home Basic , 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 2037 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 448 Mb
Hard Drives: C: Total - 238433 MB, Free - 64013 MB;
Motherboard: Dell Inc., 0U990C, , .GZLYNF1.CN7016685K00L8.
Antivirus: AVG Anti-Virus, Updated: Yes, On-Demand Scanner: Enabled
 

A:Need to connect Dell Laptop to LG TV via HDMI

Have you tried Pressing Fn+F8? It may take more than one Press of the Key Combo to get the external Display the way you want it.
 

Read other 2 answers
RELEVANCY SCORE 61.6

Hey, I use a HP Envy x-360 m6 Convertible laptop running windows 10. I tried connecting it to my old ASUS VH192D monitor using a HDMI to VGA converter (the laptop doesn't have VGA port and the monitor doesn't have a HDMI port).  When I first connected the monitor to my laptop both the laptop and the monitor adapted to their native resolutions and were working fine. I tried to change the ASUS monitor's resolution to 1080 (native resolution 1366x768) which threw me an error saying OUT OF RANGE.  I then changed the resolution back to its dafault value but the error message was still being displayed. I hard reset the monitor and also tried a software reset. Both were unsuccessful.  On doing some research, I found that there could be numerous causes to my problem. I checked all the possibilities but I still can't find a solution. The first thing I checked was the cable and the adapter. I plugged the cable, adapter and monitor to all my other computers and it seemed to work fine. I then checked if all my drivers were up to date. I updated my display drivers individually (though they were already up to date) and also restarted my computer numerous times. As I was trying to solve my issue I noticed that my laptop no longer recognised the second monitor. When I checked the advanced display settings the second monitor was not detected but when I selected duplicate screens from the options, my laptop resolution automatically adapted to the second monitor's ... Read more

A:Unable to connect second monitor using HDMI to VGA adapter

@blueinstein93 Firstly number of dots is a number of dots, you CAN'T push to higher resolution (or more dots). Now, please restore your machine back to the point BEFORE the change and try again (no more dots).     https://support.microsoft.com/en-au/help/12415/windows-10-recovery-options Regards.

Read other 1 answers
RELEVANCY SCORE 61.6

Just purchase HP ENVY DESKTOP 750-435 st.  My specs:  I7-6700 Processor, 6th Generation, 16 GB DDR4, NVIDIA GeForce GTX 960, 256 SSD + 2TB HDD storage.   I have a monitor, that I have been using without any issues:  HP Pavillion 25bw.  When I tried to connect the HDMI cable to either HDMI 1, or HDMI 2 port, it would not connect.  The monitor did not receive a signal, and immediately went to Sleep mode.  However, when connecting it to the other HDMI ports, it did. I am concerned because I want to get the most out of the Graphics card.  Also, the computer came already with a name, which is making me wonder, if this was a return, and the prior person was having the same issue.  This is my third day having this desktop, so I am within the time frame to return it; though I do not want to.  However, I am not a tech savvy person, to be opening computers to fix this issue. Am I being unreasonable in expecting a very expensive computer to work out of the box?

A:Why won't my monitor connect to new desktop with HDMI cord?

@GRETHEL Welcome to HP Support Forum. Your machine has the following ports at its back: Figure : GeForce 960 portsDisplayPort: 3HDMIDVI-Iand Figure : Odense2-S back I/O panelUSB 2.0: 2LAN (Ethernet)HDMIUSB 3.0: 2Audio: Line inAudio: Line outAudio: MicrophoneSource:  https://support.hp.com/rs-en/document/c05267115 The first image is for an external card and the second image is for the motherboard which has 2 HDMI ports for the Integrated video. But please note: Integrated video is not available if a graphics card is installed. Therefore you can't use  2 ports of the Integrated card. But you have plenty of DP ports to connect monitors. If your monitor(s) does/do not have DP ports, you can use DP to HDMI cable(s). Regards.

Read other 1 answers
RELEVANCY SCORE 61.6

Gang
This concerns an HP late-model notebook, Win7 Home Prem x64, used as a desktop with HDMI-connected 1080p 21", plus usb mouse/kbd. The goal is to make this as simple as possible: desktop-like. Just turn it on and work.
It seems that either/both coming out of sleep state or simple shutdown and startup the Monitor stays offline because, I suppose, its getting no signal from the notebook. I tried to duplicate this on a dell notebook in my 'lab' but I only have a vga connect to work with - it just works. in fact I have trouble with the usb port but not with the monitor persisting.

is there a chance there is some interplay between vendor/maker-specific implentations, plus perhaps the embedded Intel HD video controller?

z
 

A:How to make HDMI-connect Ext Monitor persist?

this could be an external device problem, somehow messing up allocation of resources @ boot. my brother has a new i7 super machine, hooked up with a monitor(dvi) and an hdmi bigsceen hooked up as well.
no problems. then he hooked up a firewire card-hooked up to an external mixer, something like that. he had identical/very similar issues. when we troubleshot, i first said eliminate any possibilities no matter how remote.

long story short.

when the external device is powered up his main monitor did not work when coming out of hibernate mode. with it off(not the card just the devise) all is well.

from what i could assertain, didn't sound like your problem. i know this sort of deal does not usually occur with printers and scanners. but it is somewhere to start(or end if nothing else is hooked up in such a fasion).

good luck dude
 

Read other 2 answers
RELEVANCY SCORE 61.6

Hi, I recently figured out that I can plug my Xbox 360 Video and Audio Cables into my computer. What me and my father tried, was that we tried opening windows media center (Since we have windows vista). We have been trying for 4 hours now, using a bunch of different methods. I'm not that very techie (Which is why I'm asking you guys) so I'll use the best terms I can. My main question is, how do I make my Xbox 360 screen appear on my monitor so I can play it.
Sidenote:If this actually works is there a way I can record what I'm playing?

Thank you all in advance.
 

A:Can't connect Xbox 360 to HDMI Computer Monitor.

Bit confused here. Why are you plugging it into the computer? Can you not just plug it into the monitor? Most have several ports, think one of them should work for you- lots have a HDMI input, that may be your solution.
 

Read other 2 answers
RELEVANCY SCORE 61.6

Hi

I have an i5-based DG67BL intel motherboard computer that has a DVI and HDMI ports with one DVI monitor connected to the DVI port.

I added an GeFORCE 210 graphics card to it that has a VGA and a DVI ports and connected additional two monitors to it.

So far computer is working fine with three monitors configured in windows as extended desktop.

This motherboard has just one PCIeX16 slot. It has 2 PCIeX1 and a PCI slot that are vacant.

I need to connect yet another DVI monitor. I took a HDMI<->DVI cable, connected it to the onboard HDMI port. the monitor was not detected.

I tried various combinations of monitors and bios settings in vain. Under no circumstances the HDMI port drove the DVI monitor.

The cable is working fine elsewhere.

What did I do wrong ? Is there something I need to buy/replace for this to work ?

Thanks !

A:How to connect additional DVI monitor to HDMI port

you 'need' to connect a 4th monitor? I recommend getting graphics card(s) to support your endeaver, but up to you.

Why don't you get a dvi to vga or maybe its a vga to dvi cord and connect the dvi monitor to the graphics card vga port?

Does it have to go into the HDMI port? HDMI carries sound as well as the video signal, dvi only carries video, and vga carries a lesser quality video

Read other 9 answers
RELEVANCY SCORE 61.6

Laptop: compaq presario cq57Monitor: dell x3782 I dropped my laptop a few years ago, and the screen is now displaying something similar to the link below:http://c8.alamy.com/comp/C2AF0D/dropped-laptop-causing-damage-to-casing-and-breaking-lcd-screen-C2AF... This laptop has a VGA port, but no HDMI port. The laptop seems to be turning on fine. I simply can't see the screen. It turns out that the monitor I have will not display the computer. It states that there is no cable until I connect the VGA to the laptop and then the monitor turns off and the button turns orange.  Any ideas as to what I am doing incorrectly? I've tried hitting F4 with and without hitting the right arrow three times, and it doesn't change anything. Is it possible to use an adapter to display the VGA on HDMI? Are the ?injuries? internal and far more serious than the LCD screen issue? Are the laptop and monitor incompatible?  Any ideas as to what I am able to do without replacing the screen? I don't want to spend a large amount of money on something I likely won't use if I am able to retrieve the information I need to from the laptop. Thank you in advance! - Completely Lost and Confused

A:Compaq (VGA) Won't Connect To Monitor/ Are there HDMI Adapte...

Try the windows key + p and hit the up and down arrow and enter alternately until you get a picture on the external monitor. 

Read other 1 answers
RELEVANCY SCORE 61.6

I have a dv7 series laptop.  I also have an HP elite 2201x monitor that only has a display port connection.  I bought a DisplayPort to HDMI converter, but it doesn't work.  What do I need to do to be able to use this monitor?  Thanks.

A:Can I connect a DisplayPort monitor to hdmi on my laptop?

I find myself in a similar situation, please some find an answer for this!

Read other 7 answers
RELEVANCY SCORE 61.6

I purchased a new monitor and desktop and I'm confused as to why I can't get the monitor to connect with a HMDI cord. I know the monitor works fine. I even got it to work with my old computer with a HDMI cord. But when I plug it into this new desktop, the monitor is black with a message that says 'Check Video Cable!'  I'm a little worried that there's something wrong with the desktop itself and it's not booting up properly (which is why nothing is appearing on the monitor) The power button is lit up(plus the bottom of mouse is lit red and the dvd tray opens) but it seems pretty quiet. (I am used to having loud, crappy computers though)  Idk if this helps, but my monitor is a HP Pavilion 23xw 23-inch IPS LED Backlit Monitor and it has 1 VGA and 2 HDMI (with HDCP support) My desktop is a HP ENVY 750 Desktop PC These are the specs-No Secondary HDD2GB AMD Radeon R9 370 [2xDVI, HDMI, DP, DVI to VGA adapter]16GB DDR4-2133 DIMM (2x8GB) RAMWindows 7 Professional 647-in-1 Media Card Reader, 4 USB Ports (Top), Audio [Top 2USB2.0, 2USB3.0]500W Power supply6th Generation Intel® Core? i7-6700 quad-core processor [3.4GHz, 8MB Shared Cache]2TB 7200 RPM SATA 6G Hard DriveHere's a pic of it  Should I  buy a DVI to VGA adapter and try to connect it that way? And if so, does anyone have any recommendations on a good adapter? Thanks in advance!  

Read other answers
RELEVANCY SCORE 61.6

i buy refurbished hp compaq pro 6300 desktop and I bought new monitor AOC have only connection HDMI and VGA . I have cable VGA but monitor is not recognized the computer . but I try to find out the option on monitor it is showing only two option D-SUB and HDMI.how connect the desktop with monitor? 

Read other answers
RELEVANCY SCORE 61.6

I have a Yoga 11s that started having hdmi connection issues about a year ago and has recently quit connecting to an external monitor via HDMI completely. We tried upgrading to Windows 10 to see if that would overwrite any software issues - no luck. The HDMI port actually appears loose. I did an extensive search of the forum and found posts that recommended cutting down the rubber around the base of the hdmi cord - tried that and at least I had a little activitiy - in the upper right hand corner of the external monitor up popped a box that says DVI then VGA then HDMI - but then says No Signal. Tried the graphics card update recommended on a post from long time ago and a popup indicated I had a newer version already installed. I have taken it to a laptop repair place - said they couldn't get parts from Lenovo. I found an "authorized" Lenovo repair shop locally - when I called they said they only work on business machines Called Lenovo and they told me to take it to Best Buy - however since I purchased this directly from Lenovo, Best Buy said they can't work on it. I would rather not send it into Lenovo because they tried to charge my hubby hundreds of dollars when his 15 day brand new laptop quit working, claiming damage - luckily extensive pictures taken and dated prior to sending it in thwarted that attempt at extortion. Does anyone have any suggestions? I need to be able to do presentations and work remotely with this so it is no... Read more

Read other answers
RELEVANCY SCORE 60.8

It was my understanding that the HDMI connecting cable carried both video and audio. I have purchased a Dell XPS Laptop that has the HEMI connector.

Connected it to my Sony Bravia 42" TV and the Windows Desktop was truly amazing to see. My problem is that the only audio I am getting is from the speaker in the Dell Laptop.

I was surprised that there was no sound (along with the video)!!!

Does it make sense to buy a mini plug for stereo to come out of the Dell Laptop and that split to a right and left channel to run through my sound sytem.

I think this might work but why am I not getting sound through the HEMI connection?

If anyone has dealt with this, I would sure appreciate any ideas.

Thanks,

Steve Bell

A:HDMI Connect to a Sony Bravia 42" using Dell XPS

You?re going to want to get into your audio settings and make sure your HDMI is set to send sound to your device.

If you are running Vista, right-click your speaker icon in the taskbar and select ?Playback devices? from the menu. From there, a window will open and should list your audio devices. Highlight ?Digital Output Device (HDMI)? in the list and hit the ?set as default? button. Also, right-click and make sure the device is enabled.

Cheers,

Read other 1 answers
RELEVANCY SCORE 60.8

I updated to Windows 10.  Ever since then i cannot connect to my monitor via HDMI.  there is a yellow exclamation point symbol next to the Intel driver and I've tried uninstalling and re-installing as well.  Any help would be appreciated.  

Read other answers
RELEVANCY SCORE 60.8

Anybody know?
I bought a USB 3.1 Type C Male to HDMI Female Micro USB 1080P Adapter Cable but it didn't work - nothing on the display in my Dell U3415W monitor, nothing on my projector either (windows 10 doesn't detect an external monitor).  Anybody got any ideas?

A:How to connect xps 13 9550 to external monitor or projector with HDMI

Apparently no all USB 3.1 Typce C cable is compliant. There's a guy on Amazon who works for Google whose reviews you should find.

Read other 11 answers
RELEVANCY SCORE 60.8

Hi I am facing issue with my Laptop (Pavilion G6 model) unable to connect monitor with HDMI to HDMI

A:Unable to connect laptop to monitor with HDMI cable

Hi @Raju_sreeman,Thanks for becoming a member of the HP Support Forums. I understand you are having an issue with connecting the computer to HDMI monitor. I will be glad to help you.Please post the full product number of your computer. See the following, if you need help with that information.How Do I Find My Model Number or Product Number? Please get back to me with above information, so I can help you better.

Read other 1 answers
RELEVANCY SCORE 60.8

when I connect my Acer laptop and HP Pavilion with HDMI cable my laptop picture is going black.Sometimetimes it starts working randomly. My monitor is connected to power at the moment but ON/OFF light on front is off but back of the monitor light is on so power is running through. I have tried my other monitor with same cables and it worked.I would think that something is wrong with monito,r but it seems that it works whenever is wants.Dont know much about computers  so go easy  Much appreciated!

Read other answers
RELEVANCY SCORE 60.4

I have a Dell 7450 AIO, I'm trying to add a second monitor to have dual display so I can extend the desktop.  The current OS is Widows 7.

A:Dell 7450 AIO How to add a second monitor via HDMI out or Disport

Hi there, on your system do you see a DisplayPort and an HDMI out? you should be able to use either connection to extend the desktop. Did you see these outputs on there or already try, just wanted to make sure I didn't miss anything?Best regards,Brad

Read other 1 answers
RELEVANCY SCORE 60

I try to use a HDMI connection line to connect my thinkpad carbon x1 with a monitor. However, it takes me so long and try many different positions to allow my monitor to detect my laptop. Are there any better way to connect my thinkpad x1 to a monitor. Thanks.

Read other answers