Over 1 million tech questions and answers.

BSOD Still crashes after a factory reset. Attempt to reset the display

Q: BSOD Still crashes after a factory reset. Attempt to reset the display

BSOD Still crashes after a factory reset. Attempt to reset the display driver and recover from timeout failed.

I thought a clean factory reset will fix the issue. But it is still has the BSOD. I have uploaded the zip file that contains the dump as instructed.

Preferred Solution: BSOD Still crashes after a factory reset. Attempt to reset the display

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD Still crashes after a factory reset. Attempt to reset the display

Your display driver is outdated.
Update it by following these instructions.

How-To Install AMD Catalyst? Drivers For A Windows? Based System

fffff880`046e0000 fffff880`04cf7000 atikmdag T (no symbols)
Loaded symbol image file: atikmdag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Thu Jul 02 18:45:07 2009 (4A4CF223)
CheckSum: 005C2509
ImageSize: 00617000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Read other 9 answers

Hello! New to posting here.

Over the past week I have experienced a BSOD while playing GW2. At first the screen would go black while playing (I could still hear the audio) and say no DVI cable was detected. I tried unplugging and replugging the DVI cable and tried using an HDMI cable as well but the signal would not return.

When I would try to reboot it, it would bring me to a BSOD saying something along the lines of attempt to reset the display drivers and recovery of timeout had failed. It would then fail to boot to windows and I would only be able to boot to safe mode where it presented me with a screen with a BCCode 116. I didn't get the rest of it and not sure if I can bring it up again. Figuring this was a driver issue, I tried to uninstall and reinstall the latest drivers and even tried to use some older ones to no avail. I also tried to move the card (GTX 670) to another PCI-e slot but that had no effect either thinking maybe the slot was damaged but that did nothing to fix the issue either. The strangest thing is that twice now it would just start working on it's own again and I have no idea what I had done that would cause this.

I found some other threads that seem to have a similar issue to me but their solutions have not worked for me. As requested in the posting instructions, I have attached the log from the DM log collector shortly after it started working again. Thanks for your help. Any assistance would be appreciated.

Read other answers

Attempt to reset the display driver and recover from timeout failed is the error message at the top of the BSOD. Precursory searching has yielded that it's likely an issue with my video driver and that I'm going to need to do a clean sweep of it, but I wanted to make sure it wasn't anything else.

Seems to happen mostly randomly, sometimes while gaming, sometimes while net browsing, and even while idle at night.

*System is only around a year or two old
*Windows installation is newer than that, but still the OEM, I reformatted not too long ago.

A:BSOD mostly randomly, 'Attempt to reset the display driver...'

In regards to your Video TDR Error:

Quote: Originally Posted by H2SO4

These are all stop 0x116 VIDEO_TDR_FAILURE conditions.

It's not a true crash, in the sense that the bluescreen was initiated only because the combination of video driver and video hardware was being unresponsive, and not because of any synchronous processing exception.

Since Vista, the "Timeout Detection and Recovery" (TDR) components of the OS video subsystem have been capable of doing some truly impressive things to try to recover from issues which would have caused earlier OSs like XP to crash. As a last resort, the TDR subsystem sends the video driver a "please restart yourself now!" command and waits a few seconds. If there's no response, the OS concludes that the video driver/hardware combo has truly collapsed in a heap, and it fires off that stop 0x116 BSOD.

If playing with video driver versions hasn't helped, make sure the box is not overheating. Try removing a side panel and aiming a big mains fan straight at the motherboard and GPU. Run it like that for a few hours or days - long enough to ascertain whether cooler temperatures make a difference. If so, it might be as simple as dust buildup and subsequently inadequate cooling.

The above quote was taken from http://www.sevenforums.com/crashes-d...tml#post280172, which is linked to in usasma's thread about this error. Closely follow the first three posts o... Read more

Read other 3 answers

Hi, i just recently bought a monitor (Asus Vs228h) and used it for an external screen for my laptop(hp dv6 A10-4600m) i used hdmi cable for the connection, the problem is whenever i play the game DOTA2 and within the game when choosing a character it suddenly stop for like 3-5 secs and BSOD. even when i use a VGA cable still the same results. please if anyone had the same problem or anyone who has knowledge about this, can you help me out


A:BSOD attempt to reset the display adapter timeout

Hi -

The error you are describing is a Video TDR timeout. There are 2 bugchecks associated:

0x116 = driver was unable to reset within 30 secs; BSOD ensued
0x117 = same as 0x116, except the driver did ultimately reset. This is called a "Live Kernel Event".

See if updating your video drivers helps.

Regards. . .



Read other 7 answers

We seem to be having issues with our HP 8470p Laptops that keep throwing BSOD with the code 0x00000116 ATIKMPAG.SYS. The BSOD also reads Attempt to reset the display driver and recover from timeout failed. The video card in these laptops is the AMD Radeon HD7570m.  We have updated the BIOS to the latest version released by HP as well as tried to completely remove all video drivers and install the latest from HP and AMD. Has anyone experienced similar issues or have any input on a fix for this issue?

Read other answers

Hello I'm a new user to the forums, over the last few days I have been unable to start my Pc normally. If left to load after the "Starting Windows 7" screen, the Pc either BSODs with "Attempt to reset display driver failed" message appearing or my monitor shows "No signal from Pc". The only current work around for this I've found is to load the computer in safe mode then restart and let it load normally, it doesn't BSOD. If put into sleep mode, on waking up no signal is received, but I can still log in, as I can hear the sound through the speakers.
I am unsure as to whether this is a driver related issue or if it is due to my system now being pretty old.

Thanks for any help in advance

A:BSOD Attempt to reset display driver failed

BugCheck 116, {fffffa8005376010, fffff88004792efc, 0, 2}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
When the computer refused to boot with a stop 0x116 but boots fine in safe mode, it is definitely a display related issue .... either the driver or the card.

We cannot check the card in safe mode. So first let us try another version of the display driver.

Uninstall the display driver using Display driver uninstaller. Then download and install 13.9 WHQL or 13.1 WHQL. Does it happen the same? Let us know.

Read other 9 answers

Before few weeks my Dell Laptop N4050 is working fine but late started to get multiple BSOD.

Tried to uninstall old drivers and installed new AMD Drivers but failed.

Now my laptop has become total mess. Please find the attachment containing all the details collected by DM Log Collector.

Please help. A reply will be highly appreciated.

Read other answers

Hello people,
Attachment 188382
I'm getting BSOD when trying to play games, or trying run 3DMark06.

I've gotten serveral of different error messages, depending on which drivers i've tried to update. Now I've updated the latest Nvidia graphic driver(from nvidia website), sound card driver and the newest BIOS from dell's website.

I've runned whoCrashed and i got the following result:
On Thu 15/12/2011 1:53:25 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\121511-15444-01.dmp
This was probably caused by the following module: nvlddmkm.sys (nvlddmkm+0x1759C8)
Bugcheck code: 0x116 (0xFFFFFA80079954E0, 0xFFFFF8800F6719C8, 0x0, 0x2)
file path: C:\Windows\system32\drivers\nvlddmkm.sys
product: NVIDIA Windows Kernel Mode Driver, Version 285.62
company: NVIDIA Corporation
description: NVIDIA Windows Kernel Mode Driver, Version 285.62
Bug check description: This indicates that an attempt to reset the display driver and recover from a timeout failed.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: nvlddmkm.sys (NVIDIA Windows Kernel Mode Driver, Version 285.62 , NVIDIA Corporation).
Google query: nvlddmkm.sys NVIDIA Corporation VIDEO_TDR_ERROR

On Thu 15/12/2011 1:53:25 PM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: dxgkrnl.sys (dxgkrnl!TdrResetFrom... Read more

A:BSOD nvlddmkm.sys Attempt to reset the display driver failed

See STOP 0x116: VIDEO_TDR_ERROR troubleshooting to start. If you need further help after that, let us know.

Also, rather than an IR detector or your finger, you can check temperatures using the hardware info sensor readouts. You may have to install it multiple times before it actually runs.

If you have not done driver changes using Driver Sweeper, do the following:

1. Download and install Driver Sweeper
2. Download the latest driver for your nVidia card
3. Click Start Menu
4. Right Click My Computer
5. Click Manage
6. Click Device Manager from the list on the left
7. Click the + next to Display adapter
8. Right click your device
9. Click Uninstall
10. Check the box to Delete driver software for the device
11. Click OK
12. Restart your computer in safe mode
13. Run Driver Sweeper, select nVidia drivers, analyze, clean
14. Restart your computer
15. Install the latest drivers

Read other 8 answers

atikmpag.sys bsod

This error has been occurring randomly over the past 1 year++. It's so frustrating whenever my desktop crashes while I'm gaming. i did a clean reinstallation of my amd drivers with DDU, but i'm still getting the same bsod. I want to find out if it's the graphic card problem or a software problem. PLS HELP!!!!! thanks ALOT

Read other answers

i have tried reinstalling my amd drivers and updating it but the same thing happens again(BSOD), i have no freaking idea what is causing my computer to blue screen. PLZ HELP MEEEE

i get bsod when im playing games, watching videos on youtube or when i let my computer idle

A:BSOD Attempt to reset the display driver and recover from timeout fail

The zip contains a tmp file only.

Try Blue Screen of Death (BSOD) Posting Instructions one more time.

Read other 6 answers

Hi! So okay. I hope I'm at the right place for this.

Last year my laptop suffered from a pretty hard crash just when I was opening Spotify (pretty strange). I managed to get the computer up and running again after many factory resets, un/installations of drivers and so on. Don't remember half the things I did back then.

But since then I've still suffered from DSODs, like every time I restarted the laptop or something like that. But after some BSODs I've always got back in the computer, so I kept on living with it sort of. But recently the laptop just kept on crashing everytime it came on to the "Welcome..."-loading screen. Sometimes it works but its rare, but Safemode works fine.

The error the BSOD throws me is "Attempt to reset display driver and recover from time out failed" with the note pointing to atikmpag.sys. I've searched and tried so many different solutions I would like to think but I feel the need to get some help on this actually.

Followed the instructions for creating a log and below is my specs:

Computer: Samsung Notebook 305V5A-T05
OS: Windows 7 Home Premium 64bit
CPU: AMD A8-3530MX APU with Radeon Graphics
RAM: 8GB (2x 4GB Samsung)
Graphics card: AMD Radeon 6600M and 6700M Series, AMD Radeon HD 6620G

A:BSOD on startup, Attempt to reset display driver failed (atikmpag.sys)

The zip is not containing a lot of necessary info. As it is stated in the OP, it is possible that the crash dumps are not recorded, but we need some other info. Please provide these two .....

► upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
How to Create a System Information File in Windows.

► Take a camera snap of the next BSOD screen and upload it here.

We can start troubleshooting after getting these two.

Read other 2 answers

My system always runned pretty smooth, running BF4 on high setting with no problem, but last week my computer got pretty hot playing Borderland 2 and crashed on a BSoD. Now every time I start the game after 5 or 10 min playing I crash on the same BSoD : Attempt to reset the display driver and recover from timeout failed.

I run a Toshiba laptop Qosmio X870 equipped with a Geforce GTX 670M.

-I've tried several drivers roll-back as well as a re-install of the latest version : 337.88. Always the same crash, on some older version of drivers the crash only occurs quickly.
-I've tried re-installing windows, same result, crash after 5 to 10 min.
I've tried the windows hotfix for this problem : microsoft fix it 50848 http://support.microsoft.com/kb/2665946
But still got the same crash, the game only freeze a bit longer before I got the BSoD

I run on directx 11 version and my windows 7 Home premium 64bit is up to date

I haven't tried any other game then borderland 2, but before the overheat it was running smoothly. The system is running good and I'm not overheating when a crash occurs (at least not my CPU cause it's the only one I monitors) and my fan don't even run at max speed. No lag in game, everything is normal before a crash.

I think the heat may have damage my GPU, but I wonder if here is any way to test it, or if any other thing I should try before I go on with a GPU replacement.
I've read on the windows help to try and put a longer timer value for the display... Read more

A:BSoD Attempt to reset the display driver and recover from timeout fail


BugCheck 116, {fffffa805482f010, fffff8800ffd9d1c, ffffffffc000009a, 4}

*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+98bd1c )
So your nvidia Drivers are still flagging up.

Lets try this, Remove all your current Nvidia Drivers, Re-boot and Install These:

NVIDIA DRIVERS GeForce 337.88 Driver WHQL

Read other 5 answers

I just started to play wow again but i still get bsod's when i logged in i already runned a memtest no errors found here is my dump thank you

A:Bsod world of warcraft Attempt to reset the display driver and recover

All dumps blame nvlddmkm.sys, part of your Nvidia Drivers

Causes:bad RAM, incorrect RAM timings/voltages, bad Graphics card, overheating

Uninstall the Nvidia drivers then use driver sweeper to remove the leftover Nvidia files
Guru3D - Driver Sweeper

Then reinstall the Nvidia drivers:

Test your RAM; RAM - Test with Memtest86+
If this does not work test the graphics card in another PC

This was likely caused by the following module: nvlddmkm.sys
Bugcheck code: 0x116 (0xFFFFFA80042444E0, 0xFFFFF88010169CF8, 0x0, 0x2)

Read other 9 answers

I keep getting BSOD during gaming, especially while playing games like DMC devil may cry, hitman absolution. Everytime I get the same bsod message "attempt to reset display driver failed". I have done clean reinstalling the gpu driver but that didn't solve the problem. I am suspecting that this is a overheating problem but I'm not sure, so I would like to get advices here hopefully. Thank you.

A:BSOD while gaming, error *attempt to reset display driver failed*

It's a stop 116.

Please go through: STOP 0x116: VIDEO_TDR_ERROR troubleshooting and let us know if you were able to meet a resolution.
How to troubleshoot video card problems
Drivers - Clean Left over Files after Uninstalling

Read other 5 answers


I was using my PC as usual when my dual-monitors just went black. Upon restarting, I got a BSOD with error message: "Attempt to reset the display driver and recover from timeout failed" - It also notes nvlddmkm.sys in the description.

I have downloaded DM Log Collector in an attempt to upload the information here, however the program runs and does not create the .zip file as it says.

Any help towards a solution is appreciated.

OS: Windows 7 Ultimate x64
CPU: Intel(R) Core(TM) i7-4770K @ 3.50GHz
Graphics: NVIDIA GeForce GTX 760
RAM: 16gb

Thank you kindly.

Read other answers

I've been having an issue the past couple months in which I will be playing a game for around 5-10 minutes and then the screen goes black. After this, one of the following occurs:The screen returns, with the game being played not responding (Happens with less intensive games like Minecraft), a message saying the AMD display driver has recovered is displayed in the bottom right corner
The screen remains black until I ctrl + alt + del and force close the application (Steam games such as CS:GO)
The screen flashes between the game, and a black screen, usually consisting of audio loops, and then eventually freezes into a BSOD with the following message: Attempt to reset the display driver and recover from timeout failed

I've tried updating my video drivers, monitoring my temperatures, and stress testing, but I can't find a solution.

A:BSOD Playing Somewhat Intensive Games, Attempt to Reset Display Driver


Read other 1 answers

I bought a XFX HD 7850 2GB less than 2 weeks ago and has experienced numerous BSOD all with the same error message "Attempt to reset display driver and recover from time out failed" I've tried various versions of AMD's catalyst driver but it has not resolved my issue. I have not attempted to overclock the GPU, all factory default settings.

The BSOD's are not easily reproducible. So far, it's happened only when I play Skyrim, after maybe 40+ minutes of gaming (but not always, as I've gone longer than that without experiencing the BSOD). What happens is that I would see artifacting on the screen: long, thin, triangles pointing to the center of the screen, when the artifacting occurs there is a GPU temperature spike (it goes to around 66 degrees celcius), and then the BSOD. The first BSOD I experienced, there was no artifacting. I had exited Skyrim and launched FireFox, and was immediately hit with a BSOD with that error message.

Using MSI Afterburner to keep track of the GPU temp, it normally does not go above 60 - 62 degrees celcius during Skyrim (idles at 27 - 30 degrees celcius). I can't reproduce the BSOD using GPU stress testing utilities like Furmark and MSI Kombuster (highest temperature seen is 66 degress celcius).

Driver versions I've used:

1) installed new GPU, uninstalled old nvidia driver, cleaned orphan nividia driver files in safe mode using Driver Sweeper, installed catalyst driver version 13.1. Experienced first BSOD in Skyrim.

... Read more

A:BSOD "Attempt to reset display driver and recover from time out failed

First please could you post this: Windows Genuine and Activation Issue Posting Instructions

Read other 9 answers

A week or so ago my Dell XPS 16 laptop screen would not turn on and I had to connect to my external monitor to see anything... the display was stretched and every time I tried to run the computer in normal mode this BSOD saying "Attempt to reset display driver and recover from timeout failed." then the computer would restart and give me boot menu.

The only way to get into the computer was through safe mode. In safe mode, I fiddled around a bunch with installing drivers from AMD catalyst since at one point it was missing. I couldn't fix it, so I decided to format my computer and re-install windows from the disk that came with the laptop.

The installation process stopped just after the setup said that it's updating registry settings... and again the same BSOD appeared, which restarted the computer. I tried using the driver and utilities disk that came with the laptop but I couldn't figure out how to fix the driver, or if I could... without windows being installed on the system.

I want to know if there's any way I can fix the drivers before I install windows 7 SO I can actually install it... or if I can somehow get around the BSOD and install windows 7, then fix the drivers with the disk.

A:BSOD Attempt to reset display driver failed. Prevents win7 reinstall.

Hello and welcome Drish mate if it were me I would do this then do the drivers
Clean Reinstall - Factory OEM Windows 7

Alternatively you could try these in safe mode to start with.



PS Meant to mention it will get rid of the bloatware form Dell too

Read other 2 answers

So as the title says, I tried to factory reset and now my laptop is just turning on and off. I can get it fully off but once I turn it ?on? it just turns back off and continues It?s little loop. Does anyone have any idea on how I can get this fixed?

Read other answers

I did a factory reset on my HP notebook and it has been stuck at "resetting this PC 41%" for 3 hours.  What do I do now?  Perform a push button reset to re install Windows on your computer http://support.hp.com/wps/portal/pps/Home/ConcentraWrapper/%21ut/p/a1/04_Sj9CPykssy0xPLMnMz0vMAfGjzO...

Read other answers

My PC is a Dell Inspiron N4110 intel (R) Core(TM) i5-2450M CPU @ 2.50GHz with AMD Radeon 6470M.
I started having a bsod regarding my display driver after and update.

After trying to resintall my driver unsuccessfully and many other attempts. I decided to factory reset my laptop.
Now I'm stuck between the bsod and the factory reset that keeps attempting to prepare the PC for first use. I can no longer go into safe mode because as it's starting to boot it restarts for first use. Any ideas?

Read other answers

My PC is a Dell Inspiron N4110 intel (R) Core(TM) i5-2450M CPU @ 2.50GHz with AMD Radeon 6470M.
I started having a bsod regarding my display driver after and update.

After trying to resintall my driver unsuccessfully and many other attempts. I decided to factory reset my laptop.
Now I'm stuck between the bsod and the factory reset that keeps attempting to prepare the PC for first use. I can no longer go into safe mode because as it's starting to boot it restarts for first use. Any ideas?

Read other answers

my friend wanted me to reset her laptop and now it tries to boot says hp then shuts off and repeats that infinitely

Read other answers

I got a 2013 HP laptop win8 and when I attempt to do recovery,restore or even a Img bkup it goes to a black screen with mouse cursor that I'm able to move around but it does nothing else even if I let it sit for hours. I tried to use the built hp software to make a factory recovery disc but it said there was no recovery partition as if it were deleted but in fact a quick look with windows explorer shows it does exists and it perfectly intact plus the disk management shows it intact, healthy and labeled as recovery. As I said before I can reboot into the menu to choose to recover, restore and everything else but once I select one i get the black screen with the mouse arrow. Im trying to avoid buying the discs from hp. Would there be something possibly hiding or blocking the recovery partition ? Maybe a bad registry entry ? I've tried setting folder options to show hidden files and system files. Anyone have any recommendations ?

A:Black screen on factory reset attempt

I saw a website the other day that suggested turning off the Secure Boot on an HP machine. There seemed to be a process where you needed to enter a code you were given in order to turn it off.

I suppose other options might depend on your graphics configuration. If you can move your display back to an onboard or basic video output it might help. I do not know why doing such a thing would help since you are going back to a Factory configuration, but maybe something is getting stuck in the system and needs to be reset.

Knowing the Exact HP model number might help in research.

Read other 2 answers

I'm selling my HP Pavillion p7-1400t desktop computer, so I went through the process of transferring my data to my new machine, and factory reset.  In Windows 10 (64-bit) I chose the option to reset to factory settings, as well as delete all data.  I also chose the option to clean the disks since I'm selling it.  It went through the process and everything seemed fine so I stopped watching it once it started to slowly raise the percentage of completion (this was over several hours).  The last percentage I saw it at was around 70%, when the next time I looked at it the monitor was dark.  I figured that I had to move the mouse or hit a key to wake it back up, as it was possibly done but this didn't work.  I gave it 2 more hours to see if it would sort itself out, and at this point I knew something was wrong, so I tried shutting down the computer and still the problem continued.  There is no signal to the monitor, although the computer turns on fine. The monitor is connected via DVI and the monitor is a HP W2072a. Things I've Tried: Using a different cableUsing a different monitorConnecting to the onboard DVI rather than the graphics card (Nvidia GT630) DVIConnecting via HDMIBlindly trying to reset the BIOSChecked internal connections I suspect it may have something to do with video drivers but don't know how I would install them without seeing what I'm doing.  This is certainly an issue with the machine rather than the ... Read more

A:Monitor Signal Lost After Factory Reset Attempt

Do you have another dvi port in that gpu?  If so switch the dvi ports and see if you get a signal.

Read other 4 answers

Okay so the story goes like this, yesterday my laptop had many weird stutters and freezes so I tried to fix it by doing different things like automatic repair etc, they all didn't work so I decided to do a complete factory reset and then the procedure ended up failing and then it froze on the spot, so I decided to restart my laptop, then all I get is a black screen after hp logo. Please help!

Read other answers

The computer I got is second hand and has always been quite unstable. I usually get bsod if I leave the computer running for 15 minutes without any heavy programs in the background (IRQL not less or equal OR memory management). But recently I've been getting them while I play Skyforge. I'll play for 10 minutes then the cursor becomes all glitchy, in game the sky has all these red lines (obvious because of the graphic cards) then after about 30 seconds the screen goes to black. Then the bsod appears and the computer restarts.

I've already done a clean reinstalled of my NVIDIA driver but the problem still persists.

Any help would be appreciated.

A:BSOD playing Skyforge, "Attempt to reset the display driver failed"

Any help??

Read other 3 answers

I'm experiencing BSID issues apparently due to graphic card.

Computer:vaio vgn-fw51mf laptop
system : windows 7 home premium 64 service pack 1.
graphic card:

The issues started with computer bugs when Alt-tabbing, but one day I got a "Attempt to reset display driver and recover from timeout" bluescreen and since then the only way to make the computer run properly is to disable the graphic card driver from the control pannel.

The bluescreen does not allways appear, but the screen frequently goes black just right after the windows screen, or sometimes windows starts but I immediately get continuous ?Display driver stopped responding and has recovered? errors.

Initially I thought that it was a hard drive issue, as I've been running the computer several months with an almost full hard drive, but now that I freed some HD space (205 free GB out of 454 GB) the problem persist.

I tried to unistall my drivers and update them: any results. I hope not have a hardware issue!

Please, any help will be precious!
Thanks in advance

I attach the DM Log Collector file

A:"Attempt to reset display driver and recover from timeout" BSOD vaio

Hello welcome to SF.
Give me a few minuets and i will look into this for you.

Read other 9 answers

I have a HP Pavilion dv6 with an Intel i7 720 and an AMD ATI Mobility Radeon HD 5650 graphics card. The computer is only three months old and every once in a while a blue screen will pop up. The blue screen says: Attempt to reset the display driver and recover from timeout failed. I believe it is error: 0x0000011E. The blue screen only pops up seldomly while I am on the internet. All but one time it happened when I was watching a video on either Yahoo, ESPN, or Youtube. I recently updated the driver from AMD's website but the problem is still occurring. Any help would be greatly appreciated and let me know if any more information is needed. Thanks.

A:Attempt to reset display driver failed

Did you try to reinstall video driver?

Read other 5 answers

I get blue screen with attempt to reset the display driver and recover from timeout failed message.
Windows 7 32-bit Full Retail

A:Attempt to reset the display driver and recover from timeout failed!

You are correct to update your video driver:

Driver c:\windows\system32\drivers\nvlddmkm.sys (, 9,40 MB (9.853.248 bytes), 14.07.2009 00:09)

Are you saying you are not able to update the driver? Are you able to remove the driver? If so, you can use Guru3D to remove traces of NVidia, then reinstall video driver.

Guru3D - removes leftover traces of drivers for NVIDIA (Display and Chipset), ATI (Display), Creative (Sound) Realtek (Sound), Ageia (PhysX) and Microsoft (Mouse)

If this is not the case, let us know.
You should also update your Realtec network driver:
Driver c:\windows\system32\drivers\rt86win7.sys (7.2.1125.2008, 136,50 KB (139.776 bytes), 10.06.2009 23:18)

Read other 2 answers

Getting an infinite loading sort of error where my comp goes to HP loading screen, blackscreen, turns off, and repeats. Very annoying and nothing I've seen so far is working. I don't have a disk or drive to use to reload Windows with, and I didn't set any system restore points like an idiot, so I'm stuck here. I'm not that great with computers so any help would be appreciated, thanks.

A:Stuck restarting after failed factory reset, reset still not working

What is the full model number of the HP desktop?

Read other 3 answers

I got this today "Your device is at risk because it’s out of date and missing important security and quality updates. Let’s get you back on track so Windows can run more securely. Select this button to get going"

I ran several command prompts including chkdsk,  got  a repair utility to repair registery... etc,  defragmented and everything  I tried every solution found online and  I still  get this error when useing updates.  I even updated my drivers. I tried everything,  s  I even uninstalled my antivirus and tried it again.   I gave up and tried to do a reset  and also tried to whipe everything and do a reset and can not. really odd. 

Any insight will be appreciated.

Also on the microsoft website I saw a security update dated 09/25/2017 ( today)  and when trying to manually update it said it did not apply to my pc.  I own a Dell Desktop all in 1 64-bit operating system Product ID 00325-95873-11633-AAOEM touchscreen 24 inch all in one

A:Windows 10 update issues. Also can not do a factory reset or any kind of reset

This sounds like your system took a hit with phishing-ware or other malware.
Factory reset instructions:

Read other 1 answers

Deal All,

I need your kind assistance, we have a RICOH MP 2501SP copier machine, but since yesterday it asks for the username and password (please check the attached photo), could someone please tell me how to factory reset it? we don't have the right username and password.

Note: the recommended username (admin) and password (Blank) is not working

Thanking you all in advance.

Read other answers

Can anyone help? I bought a laptop at a pawn shop and it still has an admin password on it and i dont have a reset disk. I want to factory reset it. Its a Compaq CQ57 running windows 7

Read other answers

First time user here...
I just bought a used HP Pavilion p7-1423w from a computer store locally. It ran fine in the store and when I got it home. It did not come with any recovery disc. After poking around (first time Win8 user also), I noticed a bunch of porn pics and thumbnails that were obviously from the previous owner. I selected the "reset the pc, erase all his personal files, and re-install Windows" option. After clicking the final "reset" button to begin the process, I left the room. I came back 30 mins later and my display was off. I thought it went to sleep or screen saver. I moved the mouse, hit a few keys, and still no display at all, as if there was no cable attached. I decided to wait another hour, and still no display. I changed to the other dvi port, still nothing. Finally, I hard booted and restarted. Still no display at all. No splash screens, no errors screens, nothing at all. Just my tv saying "no input". I have no idea what to do. I removed the hard drive and hooked it up as an external to my laptop. It shows Recovery folder-> WindowsRE folder-> winre.wim (unknown file type). Thats it. Someone please help.

A:Attempted to factory reset WIndows 8, now no display!

Try Safe Mode, a function key while booting.

Read other 3 answers

A friend dropped their laptop and completely broke the display, however it works when when hooked up to a different monitor or tv. I then made the mistake of going through with the factory reset, to make it mine. I went throught he steps but when it went to restart, it won't come up on any external monitor. I can no longer go through the set up process since I cannot see anything. Am I screwed? Can anyone help?

A:Broken display and factory reset mistake...

Hi @Necamur,Thanks for becoming a member of the HP Support Forums. I understand you are having an issue with display damaged and will not start. I will be glad to help you. The can try the steps from Computer Does Not Start (Windows 8). For the screen you can go the HP Parts Surfer and order parts.Description                                                           Spare part number Displaybezel                                                                                               725617-001Display panel 15.6 in HD WLED BrightView flat panel 732080-001 See page 54 of the Maintenance and Service Guide Please keep me informed of how things went. If you require further assistance, let me know and I will gladly do all I can to help you.Please let me know if this resolves the issue by marking this post as "Accept as Solution".To simply say thanks, click the Thumbs up below!  Thanks.

Read other 1 answers

I bought a display model today at Walmart. I tried to factory reset it to get rid of anything people may have put on it while in the store. I can not factory reset it because it has a retail admin user name and password that I do not know. I called the store and they said they do not put a password on it. How do I get rid of this. Please help! TIA!!!!

Read other answers

I just got my Cyberpowerpc today with an asrock challenger 5700xt + 3600 on an asus x570 prime mobo. My friend and I updated windows and downloaded the chipset, lan, and audio drivers and everything was working fine.

When I was installing the latest Radeon drivers, I used the factory reset option to try to clear the old drivers windows installed and to prevent future driver problems. I restarted the system and the pc lost connection to the monitor. I haven?t been able to regain connection since.

What should I try to do to fix it? I can add more info in the comments if needed.

Read other answers

Help me! I have broken screen, and been using external display. After put boot mode into UEFI it stops work at all.What is the key combination to do a factory reset in bios blinly? press novo button, key down, enter.... what next?

Read other answers

Hi,I cannot log in on the Windows screen. I have a password for Bios. I just need to be able to get into this computer, I bought almost 2 years ago on eBay and have not been able to use it! Please help! I just want to reset this so I can use it.Thank you, Jessica

Read other answers

I can't access BIOS, ThinkVantage menu by pressing that button or login to Windows. Also, I can' get recovery tool by entering S/N of notebook from Lenovo page. Is there any solution to my problem?

Read other answers

I was having issues with my hp laptop, so I tried a few solutions, none worked , so I had to factory reset my laptop with the help hp tools , whist doing this however I got the message, "windows could not complete the installation. To install windows on this computer, restart the installation. But every time I restart it, it shows up again

Read other answers

hi,i wanted to know if hard reset and factory reset are the same things?my laptop won't turn on and i found out that i can hard reset that, but i do not want any of my data on hard disk to be erased. is it possible?(i've shut it down before so there is no data on RAM)thanks in advance.

View Solution.

A:are hard reset and factory reset the same thing?

Hi, No, factory reset will bring your machine back to facory status (the time opening the box) byt hard reset won't. Regards.

Read other 3 answers

After factory resetting my pc, it was installing windows and i accidentally turned it off. now everytime i turn it on it says i have to click ok to restart as it was turned off during windows installation  when i do it just repeats the same time no matter how many times i click ok and it restarts. please help as my computer is not booting up

Read other answers

its as the title implies, after my display on the screen became utterly useless, i always used an external vga monitor instead and it would always work. but now after i reformatted my pc, all i see is the acer logo, then the windows xp loading icon, then when the first xp pc setup screen comes up, the external monitor wont display it. i cant see a thing on the laptop screen so how am i supposed to set up my pc on the first boot after reformatting? please help.

A:i reset my laptop back to factory default with a cracked lcd display

try to shift the video signal to an external monitor by holding the Fn, special function, key down and the display key down ,,,which is typcially one of the F keys with a crt symbol on it...and see if that works....

Read other 2 answers

Hi guys, just wondering if I could get some help on a BSoD I've been getting recently. It has always occurred after I have opened Chrome shortly after logging in. For some reason the BSoD does not occur if I go on a game in Steam then go back to Chrome. I've attached the dmp file that explains the problem as well as the following:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.
Locale ID: 2057

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA800D4654E0
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Hope you guys can help me out, thanks.

A:BSOD when opening Chrome 'Attempt to reset and recover driver timeout'

Your logs are incomplete, important files are missing that we need to analyze your issue/s. Follow Blue Screen of Death (BSOD) Posting Instructions, let the tool run until it has completely finished and then upload the new logs.

Read other 5 answers