Over 1 million tech questions and answers.

BSOD error " Bad pool header and page fault in non paged area"

Q: BSOD error " Bad pool header and page fault in non paged area"

Recently had my work laptop upgraded to Windows 7 from XP. Everything worked fine for one week. Then I started getting the BSOD error " Bad pool header". My computer will repeatedly shut down to protect windows. I notified my IT department and they believe that I corrupted the hard drive, as I have local admin rights. they provided me with a loaner computer and loaded my backup system on to this laptop. Worked great for a week and then again started getting " bad pool header and new error "page fault in non paged area. They believe I again corrupted the hard drive. The only software I installed is a program I use for work "Form Max" which other users have been using successfully in Windows 7. I used the DM log and have attached the dump files. Any assistance would be appreciated.

RELEVANCY SCORE 200
Preferred Solution: BSOD error " Bad pool header and page fault in non paged area"

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD error " Bad pool header and page fault in non paged area"

Just discovered the original attachment was blank This one I checked and it does have files. Would appreciate any help that can be provided.
Thanks.

Read other 1 answers
RELEVANCY SCORE 180.4

Hello,

I am very new to the forums and was browsing around looking at other people with similar problems and thought I would post up my issues and see if anyone can help point me in the right directions. I have a couple of ideas but I am unsure if I am right...

I have attached the ZIP of the SF Diagnostic Tool to this post now

Basically about 3 weeks ago I had some computer issues, I figured it was a good time for a couple of upgrades so I replaced the Motherboard, Processor, Power Supply, and I had my Video Card RMA'd by EVGA (excessive coil whine)

I formatted the hard drive (it was a 300GB partition of a 1.5 TB Raid 0) and reinstalled windows 8 to the computer, everything seemed fine for about a week, I took my computer downstairs to hook it up to a TV so my family could watch some Hulu on the big screen and my computer started getting BSOD every few minutes.

I was unsure as to what was causing it so I reinstalled windows again. After the install I was still getting BSOD... so I went out and bought a SATA 120GB SSD and put it in as the primary Hard Drive and installed windows to that drive instead of onto the Raid partition. Same thing, more BSOD...

At this point I have reinstalled 4 times, I tried allowing Windows to fully update everything and tried turning all updates off and manually installing everything myself. More BSOD both ways... in fact at this point when I try to manually install the NVidia drivers they just Fail during the install and wont finish...

Gi... Read more

A:BSOD - Bad Pool Header and Page Fault in Non Paged Area

I ran the Diagnostic tool I got from this site and zipped up the file - it is now attached to the OP

I have windows set to gather the dump file but I am unsure what to do with the files at the moment

Thanks for helping

Read other 11 answers
RELEVANCY SCORE 172

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

Read other answers
RELEVANCY SCORE 165.2

Hi, I am having a problem with my newer computer, I just got this rig a few months ago and never had a problem until last Thursday. It Blue Screened on me while I was installing ARC GIS 10.1. From then on it randomly crashes. (I have previously installed ARC GIS 10 and never had a problem.)

I keep things updated (windows and drivers) and I do think windows forced through an update earlier that day. I un installed ARC GIS 10.1 and the windows update, didn't make any difference. I have also ran the Windows Mem test and Auslogic BoostSpeed/ Registry repair. I keep getting "Bad Pool Header" and "Page In Nonpage Area" and I can't seem to find something that triggers it. So far it hasn't crashed in Safe Mode without network access. I tried it once with access and it crashed. Currently have windows checking the drives for errors ( I have 4).

I think I attached the proper dump files. This is my work computer so this is kind of causing a big problem. Thanks in advanced for the help!!

A:BSOD "Bad Pool Header" and "Page In Nonpage Area" Runs in Safe Mode

Welcome aboard.

The crash dump you supplied, suggests the display driver failed there.

Code:
fffff880`0c995858 fffff880`10018000Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x980000
Go to Drivers - Download NVIDIA Drivers, follow option two to search for the appropriate driver for your system automatically, and install it.
Let us know how it worked.

Read other 3 answers
RELEVANCY SCORE 162.8

Any help on this would be appreciated - the PC crashes on boot (during the 'loading windows' screen) if I try and do a normal boot. Safe mode works, but then I get Bad Pool Error if I try and browse to any complex website (simply stuff works, but this one doesn't, for example - I assume it's Javascript or Flash crashing it).

Plus running many applications (including Notepad) leads directly to a Page-fault in non-paged area result.

Things I've tried: full scans with Avast and Malwarebytes, startup recovery console from the disc and all the options there including Startup Repair multiple times and SFC -scannow, error checking the drive with chkdsk and Partition Magic.

I tried driver verifier, but that was when the computer would still boot, it stopped it booting entirely (the earlier dmp files will be from that, the ones from today in safe mode), and it took some fixing to get as far as safe mode, so reluctant to try it again.

I'm at something of a loss, I can't even look at the dmp files myself as trying to run the Windbg install tool crashes the PC, and I don't have a second Windows machine. And I can't do an in-place re-install as that's not allowed from safe mode...

A:BSOD Bad Pool Error / Page Fault in non-paged area

Welcome to SF deanlove .

I'm currently forming a general idea based on the dump files but I need more information.

Unfortunately files are missing, so I'm not getting the full picture.
Please run the SFDT again and let it run its course it can take 15min at times to collect all the data necessary.
There should be eight files generated not including the dumps.

Please upload the MSINFO32 file:

Start → Run → type MSINFO32 then hit Enter.
In MSINFO32 go to, File → Save → name it your user-name.
Once the file is saved right click it and choose Send to → Compressed (zipped) folder.

Attach the file in your next post.

EDIT:

Your CPU is overclocked.

Code:
!sysinfo machineid
Machine ID Information [From Smbios 2.5, DMIVersion 37, Size=3019]
BiosMajorRelease = 8
BiosMinorRelease = 15
BiosVendor = American Megatrends Inc.
BiosVersion = 1408
BiosReleaseDate = 09/21/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
SystemFamily = To Be Filled By O.E.M.
SystemVersion = System Version
SystemSKU = To Be Filled By O.E.M.
BaseBoardManufacturer = ASUSTeK Computer INC.
BaseBoardProduct = P6T
BaseBoardVersion = Rev 1.xx
7: kd> !sysinfo cpuspeed
CPUID: "Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz"
MaxSpeed: 2670
CurrentSpeed: 3200
Reset the BIOS back to default:CLR CMOS


   Note
Write down the current value of the SATA Mode!
Its either AHCI or IDE.
After resetting the ... Read more

Read other 9 answers
RELEVANCY SCORE 158.4

Hello,

I just had this "page_fault_in_non-paged_area" error show up on a blue screen. It happened right after I woke my laptop up from sleep mode. I have no idea what this means...any ideas what the problem is and how to fix it? Any help would be appreciated.

Joshua

A:BSOD "page fault in non-paged area" after waking fro sleep

Please uninstall the Western Digital software. The wdcsam64.sys driver dates from 2008 and is known to cause BSOD's

Please update your video drivers (both Intel and AMD) from the manufacturer's website. It appears that you've rolled them back and they're now from a period before Win8.1 was released.

Please note the drivers below that date from before the release of Windows 8.1 (17 Oct 2013) - check to see that each and every one is compatible w/Windows 8.1 (at the manufacturer's website). If not, you must either remove the device and it's software - or locate a Windows 8.1 compatible update on the web. Removing some drivers may make the system unstable - so if you're unable to find updates, post back for info on the one's that can/cannot be safely removed.

The drivers that are struckout don't have updates available (AFAIK).
DO NOT delete them, just leave them be.

If all of this doesn't stop the BSOD's, please run Driver Verifier according to these instructions: Driver Verifier Settings

Analysis:
The following is for informational purposes only.

Code:
**************************Mon Sep 15 23:07:44.184 2014 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\091514-28312-01.dmp]
Windows 8 Kernel Version 9600 MP (8 procs) Free x64
Built by: 9600.17238.amd64fre.winblue_gdr.140723-2018
System Uptime:5 days 1:37:02.024
*** ERROR: Module load completed but symbols could not be loaded for Ntfs.sys
Probably caused by :Ntfs.sys ( Nt... Read more

Read other 3 answers
RELEVANCY SCORE 158.4

I've installed Windows 7 recently on a new computer and I've been getting occasional random BSODs since, always 0x00000050 page fault in non paged area, and it never mentions any file. The first few crashes were while surfing internet on Maxthon browser. I switched to Chrome since and haven't had any BSODs until today. Most of the time I'm playing computer games or poker and sometimes surfing poker forums, and haven't had problems with either, but today I was surfing internet and came upon a PDF file and BSOD happened 3-4 mins later. I'm fairly sure all crashes happened while surfing the net but not 100% sure.

FWIW I ran Windows Memory Diagnostic Tool and it came out OK. Also ran a GPU diagnostic, which came out with errors but mentioned that errors are possible since it's not designed for GPUs with so much memory.

I'd really appreciate any help here, thx

A:Random BSOD 0x00000050 "page fault in non paged area"

Install Service pack 1.
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

Read other 9 answers
RELEVANCY SCORE 158.4

This occurs roughly 2 to 3 times a week.Windows 7 SP1 installed July 2011 with random occurrences soon after.

Zip of documents required attached.

Would appreciate any advice.

Thanks,

Attachment 176053

Attachment 176054

A:BSOD Random occurrence "Page fault in non-paged area"

Hi segundus welcome to SF

Please uninstall zone alarm from your system.
http://download.zonealarm.com/bin/fr...load/clean.exe

Download and install Virus, Spyware & Malware Protection | Microsoft Security Essentials

Enable windows firewall.

Update Asus PCProbe Utility yours is old from 2007 ASUSTeK Computer Inc. -Support- Drivers and Download

Finish with the above steps and post back with any results.

Read other 1 answers
RELEVANCY SCORE 158.4

Hello,

I'm running window7. I installed my SSD 2weeks ago no problems until today.

BSOD "page fault on non page area"

It crashes after about one minute into startup

Really confused...

Obviously kind of a noob, but could really use some help.

A:BSOD crash 1min after boot "page fault in non paged area"

Hi,

Bugcheck 0x50 points to a memory problem.

Run MemTest86+ for a minimum of 7 passes (usually this takes several hours, so run it overnight) to check for errors.
RAM - Test with Memtest86+

Also, please follow the steps here:
http://www.sevenforums.com/crashes-d...tructions.html

Regards,
Golden

Read other 1 answers
RELEVANCY SCORE 146.8

Hi,

I started my computer in windows 7(64x) itself when the program and start buttons are about to be clickable, suddenly fel out with BSOD with BAD POOL HEADER: so i started my computer in safe mode and began searching for a solution on the forum. I came across information that it might be because of recent updates.

There were no recently installed programs, only 2 windows updates form 4 and 5 day's ago on 27 and 28 januari. So me thinking to be smart i deleted those two updates in the Control panel-Software.

Now when i start my computer i get the BSOD page fault in nonpage area. Searched for a solution but all of the problems have a error code mine only has a stop code:
0x00000050 (0xFFFFFFFFFFFFFFF3, 0x0000000000000000, 0xFFFFF8000316A56D,0x000000000000000)

i added my minidump in a rar file

it's my girlfriends laptop and she really needs it for school. So i would be blessed if somebody would help me
 

A:BSOD 1st Bad Pool Header 2nd Page fault in nonpage area

edit* jup it works
 

Read other 2 answers
RELEVANCY SCORE 146.8

Hey guys,
I've learned quite a bit from these forums now by lurking and finally got my debugging tools working right with the symbols and all.
Anyways, I wanted some second opinions on these dumps.
Here's info on the system:

Code:
-x64 Embedded (App compatibility template) ?
- 3 weeks old, unused hardware, fresh install.
Im guessing it's memory and not driver related because I get these errors:

Code:
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Could not read faulting driver name

Code:
BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Seems like both of those are related to memory.
I've also got some memory corruption errors too.

Thanks in advance for any input on these. Curious if i'm on the right track.

A:Bsod, bad pool header /page fault in nonpaged area

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Mike\Documents\Kingston\BSODDmpFiles\jivex5k\Windows_NT6_BSOD_jcgriff2\020212-15865-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer EmbeddedNT SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02858000 PsLoadedModuleList = 0xfffff800`02a9d670
Debug session time: Wed Feb 1 15:08:02.495 2012 (GMT-7)
System Uptime: 0 days 0:23:46.743
Loading Kernel Symbols
...............................................................
................................................................
..
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 19, {22, 2100000000, 0, 0}

Prob... Read more

Read other 7 answers
RELEVANCY SCORE 145.6

Unfortunately this isn't my first time posting in these forums, I really hate BSODs.
Attached are my dump files. A little bit of a background on what's going on, a couple months ago, had a faulty ram problem, no blue screen, comp just wouldn't turn on, finally got new ram 3 weeks ago. Everything has been running fine. Then I come home to a "page fault in non paged area" loop.

I can get into safe mode fine. I get an error trying to retrieve minidump files though. I've followed the instructions in the dump files thread, and it does say recording dump files when the BSOD is happening and the latest .dmp file has been included in the zip. Let me know if I'm missing anything.

Also, when I do a system restore, my comp is back to working order temporarily, but when I restart, back to BSOD.

A:0x00000050 "page fault in non paged area"

The BSOD is caused by avast! Self Protection Driver.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffff800055ec340, 8, fffff800055ec340, 2}

*** WARNING: Unable to verify timestamp for aswSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSP.SYS

Could not read faulting driver name
Probably caused by : aswSP.SYS ( aswSP+42abe )

Followup: MachineOwner
---------
Description here: Driver Reference Table - aswSP.SYS

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17118.amd64fre.win7_gdr.120830-0334
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack C... Read more

Read other 5 answers
RELEVANCY SCORE 145.2

BSOD happened randomly, i don't know what makes it happened
Sometimes, while I am surfing the internet, BSOD...
Sometimes, while I am playing games like ACR4, BSOD...
I don't know whether it is the problem of my hardware or the crash from my Windows
Thanks in advance

A:BSOD randomly(Page fault in nonpaged area/ Bad Pool Header)

1. Please download this .BAT file to your desktop.

Attachment 300411

2. Right-click on it and Run as Administrator
3. It will create a .zip file on your desktop - upload that in your next reply.

The .BAT file collects the missing information needed to analyse the BSOD properly.

Read other 6 answers
RELEVANCY SCORE 144

I love the Dev Preview so far. We were getting on so well. And then the (reimagine) blue screen of death shows up, with it's sad face. I thought I might have said something to upset it. "Shhh, it's okay winona, shhh" I said, stroking the screen comfortingly. And then she reboots. And BSOD's. Repeat X times till I also have a sad face on.

The error I'm getting is "Page Error in Non-Paged Area". This started after a BSOD relating to it falling idle for roughly 25 minutes (I've heard of other people getting this, but not my problem after). The system this is running on is an AMD Turion 64 X2 @ 2.1GHz, 3Gb DDR2 RAM, ATI HD3200, 250GB hdd. My standard issue test bed, since my Asus broke I've been using this in the mean time.

I've taken the HDD out and whacked it into my server (cause I'm just that cool), the file system is intact, ChkDsk doesn't find any integrity issues, and there's no bad sectors (allegedly). On top of this, the boot sector also seems in tact. I've done a test of both my memory modules, taking one out and testing the other on it's own - the error still occurs, so I'm led to assume a driver or something is causing the issue.
DVD drive on my test bed doesn't work, died ages ago, so that's not helpful, but I can extract dumps etc onto my server if anyone's able to help with this.

And if anyone can fix it - the beers and/or cookies are on me.
(can't upload anything right now as I'm away from all 3 computers)

A:BSOD - "Page Error in Non-Paged Area".

Originally Posted by pryogene


I love the Dev Preview so far. We were getting on so well. And then the (reimagine) blue screen of death shows up, with it's sad face. I thought I might have said something to upset it. "Shhh, it's okay winona, shhh" I said, stroking the screen comfortingly. And then she reboots. And BSOD's. Repeat X times till I also have a sad face on.

The error I'm getting is "Page Error in Non-Paged Area". This started after a BSOD relating to it falling idle for roughly 25 minutes (I've heard of other people getting this, but not my problem after). The system this is running on is an AMD Turion 64 X2 @ 2.1GHz, 3Gb DDR2 RAM, ATI HD3200, 250GB hdd. My standard issue test bed, since my Asus broke I've been using this in the mean time.

I've taken the HDD out and whacked it into my server (cause I'm just that cool), the file system is intact, ChkDsk doesn't find any integrity issues, and there's no bad sectors (allegedly). On top of this, the boot sector also seems in tact. I've done a test of both my memory modules, taking one out and testing the other on it's own - the error still occurs, so I'm led to assume a driver or something is causing the issue.
DVD drive on my test bed doesn't work, died ages ago, so that's not helpful, but I can extract dumps etc onto my server if anyone's able to help with this.

And if anyone can fix it - the beers and/or cookies are on me.
(can't upload anything right now as I'm away from al... Read more

Read other 8 answers
RELEVANCY SCORE 138.8

Hello, Laptop is continuously restarting with error- " Page fault in non paged area". serial no -> CND5132XYTModel      -> 15-r206TU New laptop was purchase just few months back from Croma CBD Belapur Mumbai India. Hardly we have used this laptop, as such laptop is very slow.  Is this problem with windows 10 OS or any driver update went wrong or any service/process/anti-virus is causing this issue?How can a new laptop give OS issue - this will be raised with consumer forum if HP does not help in resolving - we have purchased laptpop with huge cost. If OS needs to be reinstalled -> how do I get OS recovery DVD ? Question still remains -> how can HP sell faulty laptops - either help us in resolving issue or give new laptop. Thanks   

A:Laptop crashes -> " Page fault in non paged area&quo...

A three-month-old laptop is not a new laptop.  You do have a warranty and can contact HP for support with the issue. The issue could be a bad memory module, some software,  an application you have installed, a  device driver or perhaps a Windows update.   Making any kind of threat in the forum is very bad form. I am sure that you are aware of that. As far as getting an OS DVD goes, you were supposed to use a USB flash drive and create recovery media. You should have read what the script told you when you set it up back when it was new. Since you did not, then purchasing recovery media from HP or an HP partner will be your least expensive option.   Be aware that this is the HP consumer forum and this is peer to peer support. This is not a business unit of HP and we are not HP employees. We are HP customers, just like yourself. If you want to get support directly from HP, then contact HP. 

Read other 1 answers
RELEVANCY SCORE 134.8

BSOD ....page fault in non paged area error

my system configuration is
windows 7 ultimate 32 bit
3gb ram
320 gb hdd
biostar g31d motherboard
intel e7500 @ 2.93ghz

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 50
BCP1: B3924000
BCP2: 00000000
BCP3: 82E551CA
BCP4: 00000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\012212-38906-01.dmp
C:\Users\Hariharan\AppData\Local\Temp\WER-51515-0.sysdata.xml


i have attached the dump file zip into this....

A:BSOD page fault in non paged area error

  
Quote: Originally Posted by hariharanjack


BSOD ....page fault in non paged area error

my system configuration is
windows 7 ultimate 32 bit
3gb ram
320 gb hdd
biostar g31d motherboard
intel e7500 @ 2.93ghz

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 50
BCP1: B3924000
BCP2: 00000000
BCP3: 82E551CA
BCP4: 00000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\012212-38906-01.dmp
C:\Users\Hariharan\AppData\Local\Temp\WER-51515-0.sysdata.xml


i have attached the dump file zip into this....



It is much easier to find patterns, etc, when there are more than one crash. We prefer you wait until you have at least two so that if one is corrupt the other probably wont be.

This crash was inconclusive but I do note several things that need attention
Related to vulfntr.sys VIA USB Roothub Lower Filter Driver from VIA Technologies. I would update or remove. (yours is 2005)

Related to vulfnth.sys VIA USB Host Controller Lower Filter Driver from VIA Technologies. I would update or remove (also 2005)
Related to dtsoftbus01.sys Virtual Bus Driver from DT Soft Ltd. I would remove and replace with http://www.magiciso.com/download.htm

Read other 3 answers
RELEVANCY SCORE 134.8

BSOD ....page fault in non paged area error

my system configuration is
windows 7 ultimate 32 bit
3gb ram
320 gb hdd
biostar g31d motherboard
intel e7500 @ 2.93ghz

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 50
BCP1: B3924000
BCP2: 00000000
BCP3: 82E551CA
BCP4: 00000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\012212-38906-01.dmp
C:\Users\Hariharan\AppData\Local\Temp\WER-51515-0.sysdata.xml

A:BSOD ....page fault in non paged area error

D/L CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs.
For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums

Have you been checking your temperatures?
Use Core Temp, to check the CPU temps when at idle, under load and/or testing.
Let us know the minimum and maximum temps you get.


Both crashes are the same: STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS
They are blaming the Windows NT Kernel & System
This is not the actual cause.

Code:
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.
READ_ADDRESS: GetPointerFromAddress: unable to read from 82dbb848
Unable to read MiSystemVaType memory at 82d9ae20 b0c3d000
PROCESS_NAME: services.exe
SYMBOL_NAME: nt!HvMarkDirty+3f7
IMAGE_NAME: ntkrpamp.exe

D/L and run Seagate SeaTools – Short Drive Self Test and Long Drive Self Test

If that comes up clear, then run the system file checker.

How to Repair Windows 7 System Files with System File Checker

Read other 1 answers
RELEVANCY SCORE 133.6

Hello, I've been having this BSOD problem for a few weeks now - it seems to be prompted when I'm transferring large amounts of data over my wifi connection. I have taken the following steps to try and identify/fix the problem without success;

1) Reinstalled Windows 10
2) Disabled the paging file
3) Reenabled the paging file
4) Taken my 2GB and 4GB of ram out
5) Run a memory test
6) Run an fdisk on my SSD hard drive
7) Reinstalled my Broadcom drivers
8) Tried an updated version of Broadcom drivers

I have just run the windows verifier and started a download from the internet - the laptop crashed after 5 or so minutes, so I've now stopped the verifier, and uploaded the debug file below.

Any help would be much appreciated. Thanks in advance.

debug-DESKTOP-UEHHA3B-20_04_2016_182250_17.zip

A:BSOD Page fault in non-paged area error when using wifi

Please remove all pirated programs and such from your system before we can start troubleshooting.
The Forum rules is meant for everything regarding piracy
Discussing it,Asking for guidance,Asking for a crack,The use of it,Etc.





4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

Read other 0 answers
RELEVANCY SCORE 133.6

Hi there, moved my pc to a relatives house today temporarily, was moving an HDMI cable onto my graphics card for a second monitor, all seemed to be well and then out of nowhere the BSOD appeared. I can now only run the computer in safe mode. As a precaution I purchased spy hunter on top of malware bytes to check it's not a viral issue and I was in fact infected with a lot of things malware bytes hadn't been able to detect. Deleted all of those and have since run another scan with spy hunter as well as with malware bytes, I can only assume it's a hardware issue of some sort?

I also downloaded blue screen view copied all of the errors and dumped them into a .txt file which I have attached. Can anyone assist me?

Thanks in advance,

Max

A:BSOD Registry error / page fault in non paged area

Hello, 1MTM91. I will try to help you but I need you to do a few things first.

We need your complete system specs. Please include your PSU and CPU cooler and the Manufacturer and Model of all components.

Please fill out your System Specs


   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.

If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs
Please upload the BSOD Posting Instructions http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html. Upload the files here, this will tell you how. http://www.sevenforums.com/tutorials/9733-screenshots-files-upload-post-seven-forums.html

You have 3 anti Virus programs listed. It is never a good idea to run more ... Read more

Read other 5 answers
RELEVANCY SCORE 133.6

So as the title saids i get theses errors when i log into windows. Ive had the page fault in non paged area error before i fixed it by doing chkdsk in cmd and chkdsk/f. i also reinstalled windows 7 a few days again so i don't even know what could be causing it

A:PAGE FAULT IN NON PAGED AREA and REGISTRY ERROR BSOD

Hello,

I have found error 0x51.
Usual causes: Hardware failure, File system corruption, Security issues.


Code:
Debugging Details:
------------------


CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x51

PROCESS_NAME: services.exe

CURRENT_IRQL: 0

ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) x86fre

LAST_CONTROL_TRANSFER: from fffff80002fc3158 to fffff80002c92bc0

STACK_TEXT:
fffff880`06d372b8 fffff800`02fc3158 : 00000000`00000051 00000000`00000001 fffff8a0`00023010 00000000`00edf000 : nt!KeBugCheckEx
fffff880`06d372c0 fffff800`02f2bc95 : 00000000`00261718 00000000`000076f7 00000000`00000001 20204d43`00000004 : nt! ?? ::NNGAKEGL::`string'+0x9d9a
fffff880`06d37320 fffff800`02f2ba6c : fffff8a0`00023010 fffff8a0`00023010 fffff8a0`00036aa0 00000000`00555c28 : nt!HvMarkDirty+0x176
fffff880`06d37380 fffff800`02f2bf9a : fffff8a0`00023010 fffff8a0`00bdd064 fffff8a0`011a1544 fffff8a0`00023010 : nt!HvMarkCellDirty+0x150
fffff880`06d373d0 fffff800`02eef052 : 00000000`00000001 fffff8a0`00bdd064 fffff8a0`00d4df54 fffff8a0`00023010 : nt!CmpMarkValueDataDirty+0x4a
fffff880`06d37410 fffff800`02eeedf4 : fffff8a0`00d4df54 00000000`ffffffff fffff8a0`00d4df54 fffff8a0`00023010 : nt!CmpMarkKeyValuesDirty+0x182
fffff880`06d374b0 fffff800`02eee4fa : fffff8a0`00023010 00000000`ffffffff fffff8a0`00d4df54 fffff8a0`00023010 : nt!CmpFreeKeyValues+0x24
fffff880`06d374e0 fffff800`02eee228 : fffff8a0`00023010 0000... Read more

Read other 5 answers
RELEVANCY SCORE 133.6

Hi

I started having this BSOD after upgrading to win 8 and it is still persist after upgrade to 8.1.

it happens every time I wake the system from sleep.

Can someone please help me to pinpoint what triggering it?

A:Win8.1 BSOD "PAGE FALUT IN NON PAGED AREA" after sleep

Your BIOS dates from 2008. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

With a BIOS that's this old, it's very likely that the system may not be compatible with Win8 or Win8.1. I have a Lenovo x61t tablet that is in this area and I wasn't able to get it to work reliably with Win8 even when I was visiting Microsoft last April. In my case the solution was to go back to Win7.

****************

Note - something is causing my system to hang when processing your memory dumps.
I suspect a corrupted dump file, but will have to do them one-by-one in order to figure that out.
Will post back when I'm done.

Read other 3 answers
RELEVANCY SCORE 132

Encountered these two bsods within 15mins of each other. Now am currently running memtest86+ with one stick. If i have no errors on either stick, does it still mean my ram is error free? Do i need a change? I've reformatted the PC just 2 months back because of these two same issues too.

A:BSOD: Page fault in non paged area and Memory Management error.

Hi,

Please reconfigure windows to collect the correct info
You want small memory dumps - "MiniDumps"

http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

And here are the instructions for posting:

http://www.sevenforums.com/crashes-d...tructions.html



   Tip
Ensure you click the "GRAB ALL" button and then wait for each window to appear in turn and then click OK

For your RAM, run memtest with all the modules in place to start, if errors occur
then follow section 3 in the tutorial.

Cheers

Dave

Read other 3 answers
RELEVANCY SCORE 132

It's getting worse. It's happening more frequently than before. Please tell me how to fix this. Thanks.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8, 64 bit
Processor: AMD A6-4400M APU with Radeon(tm) HD Graphics, AMD64 Family 21 Model 16 Stepping 1
Processor Count: 2
RAM: 3554 Mb
Graphics Card: AMD Radeon HD 7520G, 512 Mb
Hard Drives: C: Total - 688299 MB, Free - 606218 MB; D: Total - 25964 MB, Free - 3045 MB;
Motherboard: Hewlett-Packard, 1849
Antivirus: Lavasoft Ad-Aware, Disabled
 

A:I keep getting a "Page in Non-Paged Area" error message.

Read other 9 answers
RELEVANCY SCORE 127.6

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

Read other 5 answers
RELEVANCY SCORE 127.6

I shutted down my computer this morning properly. When I turned it on in the evening I was forced to check filesystem. Filesystem errors were fixed, but after booting on in about a minute I got a BSOD: "page fault in nonpaged area".

I've booted into safe mode and all works fine. I've tested SMART on my disks all fine. RAM also ok. Tried to remove some software, drivers, nothing works :/

My system is:

Windows 7 Ultimate 64-bit BOX Full Retail SP1
Age of system: about 3-4 months.

2x Quad Core Intel Xeon E5472, 32 GB DDR2 FB-DIMM ECC, ATI Radeon HD5770 1 GB DDR5, 4x A-DATA 30 GB SSD in RAID 0 on Areca ARC-1231ML controller + BBU (for Windows 7), A-DATA 40 GB SSD (for Mac OS X), 980W Delta power supply, LG DVD-RW 22x

A:BSOD "page fault in nonpaged area" just after system startup

No one knows ?

Read other 3 answers
RELEVANCY SCORE 127.6

Ive recently started getting random BSODs "PAGE FAULT IN NONPAGED AREA" stop 0x00000050. It happens frequently at random and usually while the PC is sat doing nothing strangely enough. they can happen every 5 mins after loading windows up, or not for a few hours while the PC is sitting idle.

To fix ive tried: unplugging all but my OS HDD, disconnecting every USB device besides the wireless mouse/keyboard, taking all but one stick of RAM out, running disk check for HDD errors, memory diagnostic check, system restore but i had no restore points other than one yesterday which was pointless, checking event manager for any clues (but im not sure what to look for in particular though i am getting a hell of alot of capI2 warning/errors, about 6 every few minutes) running Everest CPU, memory, HDD stress tests for about an hour, driver verifier came back without a problem and these last two to tests i really thought would create a BSOD giving me an opportunity to narrow down the problem, but no nothing happened until my PC was sat idle an hour later and bang another one out of knowhere...

i used the src \scannow cmd and it came up with "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log"
So i thought the problem was this corrupt file so decided to reinstall windows 7 again or at least a WinRE repair, but now when i try to boot O... Read more

A:BSOD at random "PAGE FAULT IN NONPAGED AREA" Cannot find fix

I've gone through 10 of your dumps and each one points to memory corruption.

Test your RAM using Memtest86+. Let it run until 6-8 passes have completed or errors have been found.
RAM - Test with Memtest86+

You say you've already tested your RAM? What program did you use?

Read other 6 answers
RELEVANCY SCORE 127.6

Hello guys.
I'm tired of my computer, I have very important files for me here, yesterday I experienced my first time bsod, and I simply don't know what to do.
My problem occurs when I'm in "normal" mode, I'm just using my browser or internet communicator and you know the rest.
Now I'm on safe mode, I think that everything is working fine, normally I would get Bsod after 3-7 minutes, I'm on safe mode doing same things and I didn't get it.
My specs are:
i5 750
GTX 260
Mobo - I will post it later, I must find the box to tell you which one is this.
Sorry for chaotic thread, I'm so desperated that I don't even know what to say.
Thank you for any help.
P.S
My computer has three months - only CPU, RAM and MOBO
GPU has one year and HD has 6 years, but it works fine!
EDIT;
Guys, I beg you for help, I can't repair it alone, I'm trying, but I can't.
 

Read other answers
RELEVANCY SCORE 127.6

Hello,
New owner of an xps 13 2015 since a couple of weeks ago, I'm becoming more doubtful about it's stability. First I had issues with the audio driver (which seem to be fixed for the time being), but now I get the feared blue screen. It came shipped with Windows 10 installed.
I'm able to reproduce this error when torrent downloading is taking place (downloading ubuntu via qbittorent). Once I start the torrent client and the download begins, I get a couple seconds or a couple minutes, and then the BSOD - "Page fault in nonpaged area" appears and shuts the computer down.
I've been looking arqound and have followed a couple tips from around the net, but to no avail. I checked my disk for errors via 'disk management', and just ran 'sfc /scannow' but nothing interesting pops up.
I had a look at the minidumps and turns out 'ntoskrnl.exe' is the culprit. However I don't know what to do to fix this. 
I would greatly appreciate some assistance, thanks!

A:XPS 13 - BSOD "Page fault in nonpaged area" ntoskrnl.exe

I'm seeing the same thing on my XPS-13.  I've rebuilt it from scratch several times but the same problem crops up within a few days.  On the most recent rebuild I've added NOTHING other than default Windows 10 and subsequent updates.  No antivirus, no Office 2016, no Hyper-V, no machine specific drivers from Dell, nothing.  So far so good but it's only been a few hours.  I'd be interested to hear the answer.

Read other 24 answers
RELEVANCY SCORE 127.6

So I bought a brand new computer, everything is new. Clean Windows 7 64bit installation and all, but recently I started getting this Bluescreen, from what I would say out of nowhere as my computer ran just fine for a month. I have tried to remove memory sticks, Harddrives, CD-ROM. I also bought a brand new harddrive for a different problem (Which I solved) a week ago, so all hardware is only 1 month old.

I ran CHKDSK, found no problems, checked memory timings (Somewhat, I'm not really a brainiac when it comes to doing tests and looking at numbers) and ran a memory test which found no problems with my current memory stick.

My bluescreens occurr kinda random, 5-15 minutes apart, so I can start the computer just fine, everything works like it should but then all of a sudden BSOD with the messege "Page_fault_in_nonpaged_area". Never seen that one before and I've tried a lot, just now I uninstalled daemon tools, but when i started up again it BSOD 5 mins in.

Now on the other hand, I've managed to keep the computer running for maybe 30 minutes without any problem.

Here's a link of a screenshot I took on my Bluescreen Viewer report.

http://i46.tinypic.com/s2bd6d.jpg

Thanks in advance.

A:BSOD about 5-10 minutes in "Page fault In nonpaged area"

Please follow the BSOD posting instructions & attach the relevant .zip file.
http://www.sevenforums.com/crashes-d...tructions.html

Read other 4 answers
RELEVANCY SCORE 127.6

Hello guys.
I'm tired of my computer, I have very important files for me here, yesterday I experienced my first time bsod, and I simply don't know what to do.
My problem occurs when I'm in "normal" mode, I'm just using my browser or internet communicator and you know the rest.
Now I'm on safe mode, I think that everything is working fine, normally I would get Bsod after 3-7 minutes, I'm on safe mode doing same things and I didn't get it.
My specs are:
i5 750
GTX 260
Mobo - I will post it later, I must find the box to tell you which one is this.
Sorry for chaotic thread, I'm so desperated that I don't even know what to say.
Thank you for any help.
P.S
My computer has three months - only CPU, RAM and MOBO
GPU has one year and HD has 6 years, but it works fine!
EDIT;
Guys, I beg you for help, I can't repair it alone, I'm trying, but I can't.

A:Bsod named "page fault in nonpaged area"

Guys, please, any help.
I'm not able to do anything, I have to be on safe mode.

Read other 2 answers
RELEVANCY SCORE 127.6

Hi there,

I recently bought a lenovo 11s with the i5 hashwel and i have been getting a few errors.

Every time i shut down the laptop and close the laptop over, when i try to start it again the BSOD error message "Page fault in nonpaged area (rtwlan.sys)" appears.

I have checked my event viewer and the critical message is a kernal 41 error. - Am not sure if this data is needed but more data rather than less am i right? - the error in event viewer as follows:

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />

<EventID>41</EventID>

<Version>3</Version>

<Level>1</Level>

<Task>63</Task>

<Opcode>0</Opcode>

<Keywords>0x8000000000000002</Keywords>

<TimeCreated SystemTime="2014-06-07T07:46:30.897886800Z" />

<EventRecordID>3323</EventRecordID>

<Correlation />

<Execution ProcessID="4" ThreadID="8" />

<Channel>System</Channel>

<Computer>Steven-PC</Computer>

<Security UserID="S-1-5-18" />

</System>
- <EventData>
<Data Name="BugcheckCode">80</Data>

<Data Name="BugcheckParameter1">0xffffe00109c00bf0</Data>

... Read more

A:BSOD for windows 8.1 - "page fault in nonpaged area"

Hello Steven, and welcome to Eight Forums.

Please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions, and post back with the needed information. One of our BSOD experts should be by afterwards to further help.

Read other 7 answers
RELEVANCY SCORE 127.6

Hello,

I recently finished building a PC for my girlfriend, mostly for gaming and internet browsing. Here are the specs:

OS: Windows 7 Ultimate 64-Bit
Mobo: Asus f1a55 M LX Plus
CPU: AMD Athlon II X4 631
RAM: 4GB Crucial Ballistix 1333mhz
GPU: AMD Radeon HD 6850
HDD: 500GB WD 5400rpm
PSU: CiT 500w

The BSODs seem to occur only when gaming and even then it seems rather infrequent and random. It was happening a lot more but I re-installed GPU drivers which seemed to stop the crashing until it happened again tonight.

Initially the PC had an old GPU in (an ASUS 4350) this was for a couple of weeks until we could afford to buy a new graphics card. I think the PC was running fine then although obviously she wasn't gaming hardly at all with that GPU. Also the original graphics card I bought had to be sent back because it was faulty. We received a new one, it went into the machine and seemed to work fine until the PC began to frequently BSOD with this error message.

So far I have only ran a chkdsk, but there was no problems found, my next plan was to run memtest+

I have looked around online but it seems that this kind of BSOD can be quite unique to each PC. So I thought i would post here and see if I could get any help or advice
first.

Thanks in advance

A:BSOD on new custom PC: "Page Fault in NonPaged Area"

Hello warriorbearman, and welcome to Seven Forums.

Please go ahead and read the link below to post back with the needed information for someone to hopefully be able to help.

Blue Screen of Death (BSOD) Posting Instructions

Read other 1 answers
RELEVANCY SCORE 127.6

Hi all,
I just upgraded my GPU 5 months ago. After the upgrade, I managed to boot my computer with no problems at all, until it started giving me random freeze recently when i run some heavy applications.

PC will hard freeze and audio will hang. Only way to end it is to manual restart. and PC can only restart after i ve to unplug (for 5-10 mins) and re-plug all cables.

i have also updated the nvidia driver to the latest version on 30/07/18.

2 days ago, i ve a "Page Fault In Nonpaged Area" BSOD.

Today, i just had another hard freeze with no BSOD. again the only way to end it is to manual restart. and PC can only restart after i ve to unplug (for 5-10 mins) and re-plug all cables.

Some PC details:Running Windows 10 64bit.
Hardware changes:
GPU: changed from GT640 to GeForce GTX 1050.

any help will be appreciated.

thanks!
 

Read other answers
RELEVANCY SCORE 127.6

I built this computer a few weeks again and have been getting a periodic (every 2-3 days) BSOD. I ran Memtest as was recommended to those with similar problems; it cycled through four times without detecting any errors. I need to figure out which piece of hardware (presumably) is the problem so I can get it back to newegg before the return window closes. Dump file attached per forum instructions. Thanks so much for your help, guys!

A:New Build, repeated "Page fault in nonpaged area" BSOD 0x00000050

Hi trippdup.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to crashes.

Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17273.amd64fre.win7_gdr.130318-1532
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Also, Avast is contributing to the BSODs.

Code:
fffff880`08262bb8 fffff880`0427044dUnable to load image \??\C:\Windows\system32\drivers\aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
aswSnx+0x3044d
Description here: Driver Reference Table - aswSnx.SYS

Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one; for a safety need, as the installed antivirus failed.

Let us know the results.

Read other 4 answers
RELEVANCY SCORE 127.2

Hi, my friend has a problem of BSODs randomly coming while using Mozilla, playing games, doing whatever. We checked his CPU using Orthos for about 2 hours, 4 instances of the application and it was all right. He scanned his memory using memtest and it showed some errors, maybe thats the case? BTW, the computer is 2 months old and has a fresh Windows 7 64bit installation.

His comp spec :

ntel Core i5-3330 Ivy Bridge LGA1155 BOX
Goodram DDR3 8GB(2x4GB) 1333MHz CL9

Asrock B75 Pro3 Intel B75 LGA 1155 (2xPCX/VGA/DZW/GLAN/SATA3/USB3/DDR3/CROSSFIRE)

Sapphire ATI Radeon HD7850 1GB DDR5/256bit DVI/HDMI/DP PCI-Express
Seagate Barracuda 500GB SATA3 (ST500DM002)
OCZ Silencer Mk III Series 500W

A:BSOD "Page fault in nonpaged area"

http://www.sevenforums.com/crashes-d...tructions.html

One error with MemTest86+ is enough to cause a BSOD, have they considered getting a replacement with their warranty? Have they located the bad RAM module or DIMM slot?

Read other 5 answers
RELEVANCY SCORE 127.2

hi everyone
getting bsod page_fault_in_nonpaged_area
windows ultimate x64
intel 3550 i5 processor
1tb hdd
4gb ram
1gb amd graphic card
Already removed deamon tools and had memtest86+ with no errors
attached last five minidump files
please help!!!!!!!!!
its urgent
 

Read other answers
RELEVANCY SCORE 127.2

I'm getting BSOD with page fault in nonpaged area. I rebooted and tried logging in safe mode but I still get the BSOD with the same error. I tried booting in with "last known good config" and still i'm getting the same BSOD.
I'm running windows 7 64bit lenovo x201

A:BSOD "page fault in Nonpaged area"

Recommend the following steps:Use the Advanced Boot Options to choose Repair Your Computer
In the System Recovery Options, choose System Restore
Follow OPTION TWO of System Restore to revert to a date before the trouble began.

Read other 1 answers
RELEVANCY SCORE 127.2

My computer has been recently (past 2 weeks) having BSODs. It will occur at some random point and I have not found anything specific that triggers it so it must be something I am not able to understand. I would appreciate some help in finding and fixing the problem. It's quite frustrating having my computer reboot randomly after a BSOD. The computer is:

x64 Win7 Ultimate
3 years old
Full retail version of OS
OS installation is as old as the computer

I have attached the Windows_NT6_BSOD_jcgriff2 folder but I couldn't find the performance report as the forum sticky showed.

Thanks for taking the time to look at this.

A:BSOD "Page fault in nonpaged area"

Hmm, I may be reading it wrong, but it looks like either bad RAM or CPU. I can't ascertain exactly which of the two.

We can start by doing a couple hardware tests, as followed:

RAM: Memtest86+ - 7+ passes
CPU: Prime95 - Torture Test; Large FFTs; overnight (9+ hours)

Also, please provide us temps/voltages using HWInfo with Sensors only option checked. Log two 30-minute instances: one for idle, and one for high load. If you can get the system to crash during high load while logging, that is preferable. Send the logs to us.

Read other 4 answers
RELEVANCY SCORE 126

This is another error I got today. Any help is greatly appreciated.
Mike
 

A:What is "Page Fault in Nonpaged Area" error?

Read other 9 answers
RELEVANCY SCORE 125.6

Hello ,

Since Few Days Im getting BSOD after changing settings of my ATI Mobility Readon HD 5650 graphic card settings to all Maxium Level(using 100% of graphic card).

After getting First BSOD indicating that bad video driver , i uninstalled graphic card driver and again installed to default settings .

Again now it is showing BSOD , this time it is displaying error message as " Bad Pool Header Data " . details as follows :

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 19
BCP1: 0000000000000020
BCP2: FFFFFA80017A24D0
BCP3: FFFFFA80017A2B80
BCP4: 00000000046B4E10
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\031612-37549-01.dmp
C:\Users\UDAY\AppData\Local\Temp\WER-71308-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Iam also uploading the "Windows_NT6_BSOD_jcgriff2" and "Perfmon html" files as rar.

please go through and solve my problem

Thanking You.

A:BSOD with error msg "Bad pool Header Data"

1. The single DMP blamed Avast.
Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST.
http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows
2. Please run the System Update Readiness Tool (SURT) and then update to SP-1

32 Bit

Download: System Update Readiness Tool for Windows 7 (KB947821) [February 2012] - Microsoft Download Center - Download Details

64 Bit

Download: System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [February 2012] - Microsoft Download Center - Download Details
Now update to SP-1

Learn how to install Windows 7 Service Pack 1 (SP1)

Read other 4 answers
RELEVANCY SCORE 123.6

My computer was fine after fixing the latest blue screen, but now i get a new blue screen. What should i do ?

A:BSOD- Page fault in non paged area

Please remove or update these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall OR remove:

Quote:




How To Find Drivers:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of Device Manager).
- if there are difficulties in locating them, post back with questions and someone will try and help you locate the appropriate program.




- - The most common drivers are listed on this page: http://www.carrona.org/dvrref.html
- - Driver manufacturer links are on this page: http://www.carrona.org/drvrdown.html

Here's the older drivers. Please pay particular attention to any dated 2007 or earlier:

Code:
int15.sys Mon Jul 02 22:03:24 2007 - Acer Empowering Technology - http://www.carrona.org/dvrref.html#int15.sys
npptNT2.sys Thu Jan 06 01:43:06 2005 - nProtect GameGuard NPSC Kernel Mode Driver for NT - http://www.carrona.org/dvrref.html#npptNT2.sys
NTIDrvr.sys Tue Dec 21 15:33:14 2004 - NTI CD-ROM Filter Driver by NewTech Infosystems (Acer program) - http://www.carrona.org/d... Read more

Read other 3 answers
RELEVANCY SCORE 123.6

Here's a new Vista 64 issue for me guys. At random times I get a BSOD w/ Page Fault in NOn-paged area. At other times I get a BSOD w/o a specific error msg. System temp is running at 4o-45C and mem test is okay. I tried checking out the minidmp file but for some reason I can't use MS debugging tool on my system! I am getting really frustrated w/ Vista and am running out of patience. Please help!

P.S. in the past I've had issues w/ windows update most of which have been resolved. I still can't update to IE8 and 9 other updates still won't install using winupdate.

OS:Vista home premium OEM 64bit
MOBO:Gigabyte EP45-UD3P rev1.1
RAM: 2x2Gb 1066 G.Skill
HDD: WD Caviar Blue 500Gb 7200rpm 16Mb cache
Graphics: Sapphire Radeon HD4830 512Mb PCI-E w/HDMI
CPU: Intel Wolfdale E8400 3.0Ghz 1333FSB 6Mb L2 cache

A:BSOD Page Fault in Non-paged area

Please zip up the contents of the C:\Windows\Minidump directory and upload/attach the .zip file with your next post

Read other 3 answers
RELEVANCY SCORE 123.6

I am very clumsy with PCs, I tried browsing the forum and I found so many different variations of solutions for this problem, I just don't know what to do.
I reinstalled windows 7 x64 recently and bought a new hard disk. Everything seemed fine for a while, and I bought a wireless adapter. After some time working on my PC I get BSOD saying page-fault in non-paged area. I checked if my hard disk is corrupted and it seemed fine, I suspect its either drivers, but I don't know how to check which are problematic and how to fix them, or it could be memory, tho I never had problems with it before. I have no clue what to do about it and its driving me mad.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1050

Additional information about the problem:
BCCode: 50
BCP1: FFFFF8000000FB4F
BCP2: 0000000000000008
BCP3: FFFFF8000000FB4F
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\021814-17815-01.dmp
C:\Users\User\AppData\Local\Temp\WER-25568-0.sysdata.xml
ATI Radeon series 4800
4gb RAM - and I cant find which type, I think DDR3 1333
Quad INTEL Core i5/3400

UploadMB.com - SF Diagnostic

A:BSOD - Page fault in non-paged area

bump cause desperate.

Read other 5 answers
RELEVANCY SCORE 123.6

Experienced a BSOD for the first time on my Lenovo Thinkpad T400 laptop yesterday.

The BSOD error that I got was this:
Page Fault in Non Paged Area 0x50 (0x.....)

I have a dual-boot Fedora 12(default) and Windows 7 Home edition 64 bit (OEM). The BSOD is happening whenever I try to boot into Windows. Pressing F8 post boot and trying different options does not seem to make a difference. I always encounter the BSOD and the laptop restarts. Is there any way I can get into the system and extract the dump files? Is there any way to install the BSOD Dump & System File collection app or Windbg?

I can access the Windows partition after booting into Fedora. Can I extract the dump files from there? If so, what could be the location of the dump?

Thanks in advance.

A:BSOD - Page Fault in Non Paged Area

http://www.sevenforums.com/crashes-d...tructions.html
It takes certain skills, knowledge and time to understand what to do with WinDBG.

Read other 9 answers
RELEVANCY SCORE 123.6

the last couple BSOD said page fault in non pages area i got didn't have a driver listed. but not long ago aswsp.sys was slisted. I have XP pro 736 mb ram 3.00 CPU. I haven't added any new software or hardware to be getting these BSOD please help me, I am a starving web designer/graphic artist and can't afford to loose my PC. my system restore stopped working too.

here is my HJT Log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 9:59:05 PM, on 9/30/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS2\System32\smss.exe
C:\WINDOWS2\system32\winlogon.exe
C:\WINDOWS2\system32\services.exe
C:\WINDOWS2\system32\lsass.exe
C:\WINDOWS2\system32\svchost.exe
C:\WINDOWS2\System32\svchost.exe
C:\WINDOWS2\system32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware 2007\aawservice.exe
C:\WINDOWS2\system32\devldr32.exe
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\WINDOWS2\Explorer.EXE
C:\Program Files\Alwil Software\Avast4\ashServ.exe
C:\WINDOWS2\SOUNDMAN.EXE
C:\Program Files\Adobe\Photoshop Album Starter Edition\3.0\Apps\apdproxy.exe
C:\WINDOWS2\system32\VTTimer.exe
C:\Program Files\iTunes\iTunesHelper.exe
C:\Program Files\Yahoo!\Search Protection\SearchProtection.exe
C:\PROGRA~1\ALWILS~1\Avast4\ashDisp.exe
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrotray.exe
C:\Program Files\Google\GoogleToolbarNotifier\GoogleToolbarNotifier.exe
C:\Program Files\Registry Mechanic\R... Read more

Read other answers
RELEVANCY SCORE 123.6

Hello
hope someone can be of help

I have an acer aspire 5315 laptop which will not boot into vista basic. while loading windows it freezes with the message

*** stop "page_fault_in_nonpaged_area" 0x00000050
(0x892f000, 0x00000000, 0x810360a3, 0x00000000)

If I try safe mode or last known good configuration it always freezes at the same point. I tried the recovery option, but it still freezes. As a last resort I tried to boot from the Vista dvd but it still gives me the bsod.

thanks

timjcur

A:BSOD page fault in none paged area

be sure to remove any expansion cards and usb devices and try booting again

Read other 2 answers