Over 1 million tech questions and answers.

Fingerprint reader not working after last Win 10 update

Q: Fingerprint reader not working after last Win 10 update

ThinkPad T440p. Win 10 Pro 1703, OS Build 15063.632, Synaptics FP Sensors (WBF) (PID=0017) Driver 4.5.514.0 dated 5/23/2017. Since the last update having difficulties signing in from a cold start. Takes 4 or 5 swipes to log on. Resuming from sleep the reader doesn't work at all. Tried to update and/or add a fingerprint. When I use the finger I usually use it recognizes the print and says that it is already registered. When I try to add a fingerprint the app reports it is having trouble recognizing the input. Result is I have to enter password to resume from sleep.Any ideas or suggestions greatly appreciated.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Fingerprint reader not working after last Win 10 update

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 86.8

The Fingerprintreader on my x240 worked fine until last week. After installing recommended software via Lenove, Win 10 donīt recognises der reader / sensor anymore. Windows Hello can not be enabled (was runnig fine before). How can I fix this? Thank you in advance

Read other answers
RELEVANCY SCORE 86

Good evening, my fingerprint reader/simplepass stopped working after my computer received an update this past tuesday. Let me give you a timeline of event. I tried to reinstall simplepass- it would not let me do it because I was told to remove aunthentec driver. I wasn't able to remove authentec driver in the begining, so I used the instructions in another post and did it via the registry. I tried to reinstall simplepass, it would not allow me to do it, saying I already had a software that perform the same function. tried system restore, failed about 6 times. deleted all programs and restarted to download simplepass and it worked, however, It is not the one that uses fingerprint data. I tried to reinstall my old simplepass, and it work This is the error I get after I finally was able to reinstall simplepass "The truesuite engine failed to initialize properly. Restarting the application, restarting the computer, or reinstalling the application may fix this problem. The application must now exit" so, how can I find the truesuite engine? thanks

Read other answers
RELEVANCY SCORE 84.4

Windows update caused this problem on 22-12-2008 and I noticed this error last week.

Problem with Video Driver :
NVIDIA GeForce Go 6150 Video Driver - 7.15.11.5682
This is the video driver version for my HP tablet(HP Website). But windows update installed the latest version(7.15.11.7770) from NVIDIA. From that time onwards, my touch screen stopped working.
I contacted HP care and they advised me to follow these steps.
1) Uninstall the latest driver and install the 7.15.11.5682 driver by giving the video driver (devicemanager ->display adapter -> Nvidia 6150 -> uninstall)
2) Bios Flash (they provided the software)
3) Calibrate
I am done with the first two steps but still my touch screen is not recognizing the pen. So I couldn't calibrate.
When I contacted the HP care again, they are telling it may be because of hardware failure. My notebook is working perfectly except this touchscreen problem.

Again they asked me to do the driver installation in safe mode.
(Add/Remove Programs -> Remove only display adapter)
Driver installed successfully but in device manager it is showing the latest version.
I tried two times, but couldn't help. I can't install the older driver. pls help.


Problem with Fingerprint reader :
Finger print reader has not detected.
I contacted HP care and they advised me to install the driver for fingerprint reader.
After reinstall and restart, I am able to see that driver is installed ( through control panel -> add/remove p... Read more

A:touch screen and fingerprint reader not working after windows update

Full system recovery solved the problem.

Read other 1 answers
RELEVANCY SCORE 84.4

I've now tried installing the Windows 10 Pro Creator's Update twice, and both times my fingerprint reader stopped working for Windows Hello. I just get "Your credentials could not be verified". I've tried uninstalling and reinstalling the driver (and I'm on the latest), removing and re-registering my fingerprint, and I've also tried the trick I saw suggested elsewhere of switching to a local account, then back to a Microsoft account. That works temporarily but as soon as I switch back to my MS account, it breaks again. I've rooted around the BIOS but everything seems fine. I have the same fingerprint set on startup and that still works fine; Windows just doesn't recognize it, either when it's passed on from the BIOS or when I try to do it again manually. Has anyone had this problem and managed to fix it *without* reverting permanently to a local account? I don't see why that should be necessary and it definitely isn't supposed to be. I have reverted back to the Anniversary Update both times because of this issue.

Read other answers
RELEVANCY SCORE 83.2

Hi
Have seen several posts but no solutions. After a windows 10 update a couple of months ago, the fingerprint scanner stopped working. It recognises me but then says "your credentials could not be confirmed".
Microsoft have sent endless messages blaming the driver, the scanner etc etc. Finally they say it is an issue with the update, but they have not solution at this time. Good old Microsoft and their helpful updates, which you cannot avoid.
Anyone have the same problem and how did you fix it??
Thanks

Read other answers
RELEVANCY SCORE 82.4

X1 Carbon 5th Generation - 20HR series, Windows 10 ProWindows version now 10.0.17134BIOS date 3/2/18 After the automatic Win 10 April 2018 (ver 1803) update, my fingerprint reader stopped working. Had no issues prior. I have tried all suggested fixes, but no luck. - Checked enabled in BIOS - ok - Deleted driver, searched for and added driver in Device Manager - didn't work - Deleted and re-installed fingerpirnt driver from Lenovo support website - didn't work - Ran driver update tool from Lenovo support site (Lenovo service bridge) Synaptics WBDI(SGX enabled) driver status still says - "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)" Windows Hello used to work fine - now says "Windows Hello isn't available on this device.

Read other answers
RELEVANCY SCORE 82.4

Yay, another major windows update... another round of driver problems! Fun! After yesterday's big Windows update (Windows 10 version 1803, aka the Spring 2018 feature update) the Synaptics fingerprint reader doesn't work. Uninstalling and re-intalling the driver didn't fix anything. Device manager says:This device is not working properly because Windows cannot load the drivers required for this device. (Code 31){Operation Failed}The requested operation was unsuccessful. Has anyone found a work around? Thank you. setup:YOGA 720-15IKB Signature EditionWindows 10 1803 (OS Build 17134.1)newest fingerprint reader drivers straight from the website   

Read other answers
RELEVANCY SCORE 81.6

Hello. . .
I use the fingerprint reader to login to my Latitude E5550 every time.  However, I was unable to do so after the latest Windows 10 update (version 1607).  

It did still show in the Windows Device Manager (i.e., no "Unknown Device" listed)
I went into the DDP Console to try to register a new fingerprint (for troubleshooting), but it wasn't reading the swipes
I attempted to update to the latest firmware/drivers, but that only caused unknown devices to show up in the Device Manager (ControlVault Firmware v3.3.15.0 and ControlVault Drivers v3.3.14.68)
Switched back to the older driver (v3.0.48.26) and all devices were once again recognized

Any suggestions for how to get around this?  It's not the end of the world, but I *really* like using the fingerprint reader (I paid extra for) to login.  If I can provide additional helpful information, please let me know.
Thanks!

Read other answers
RELEVANCY SCORE 71.6

I have a Lenovo W530 with fingerprint reader. In the past it would both turn the computer on then log on and wake the computer from standby or sleep. About 4 weeks ago I upgraded from Windows 10 to Windows 10 Creator and the fingerprint reader will now wake my computer from sleep but requires the Windows password to be typed in. When turning the computer on the reader still works. Has anyone heard of this and a solution?
 

Read other answers
RELEVANCY SCORE 71.6

how can I use my laptop fingerprint reader it's not working 

Read other answers
RELEVANCY SCORE 71.6

Hello,          My fingerprint reader doesnt seem to be working, i have tried installing the latest drivers viz. validity sensor driver 4.5.133.0 and also hp client support. But still neither is it showing in the device manager nor is there any lead. Please helpThanking in anticipation

Read other answers
RELEVANCY SCORE 71.6

fingerprint reader not working dv7t window 7 64bit











Solved!
View Solution.

A:dv7 fingerprint reader not working

Hi,Uninstall current driver and software for fingerprint reader and restart system. Resource:Uninstalling Software in Windows 7Uninstall or change a program in Windows 7 Download and install Validity fingerprint reader driver from here.Download and install HP SimplePass Software by DigitalPersona for fingerprint reader from here.Restart system and check the results.

Read other 10 answers
RELEVANCY SCORE 71.6

Hi guys, this is my first post here.I just bought an HP ENVY a week ago, and everything was working fine till I updated the fingerprint reader and now it isn't working anymore. I can't set up the login by Windows Hello, it always says that I'm not scanning properly and flashes with a red light, but the thing that worries me the most is that the light on the sensor turns on and off even when it's not supposed to. For example: I open a new tab on Chrome and it goes on and off for like two minutes. Yesterday it went on and off all the time. This obviously this drains out my battery, so I wonder what could I do to solve this. The problems started when I updated it. Thank you for your attention.

Read other answers
RELEVANCY SCORE 71.6

Hello, My notebook is an HP DV7T-6000 CTO Entertainment Notebook that I have upgraded to Windows 10 64 Bit.  The original operating system was Windows 7 Home and the fingerprint reader worked at that time.  After I upgraded to Win. 10 it had stopped working.  I tried to look for a solution but didn't have any luck.  I made an image of my notebook, about 6 months ago and saved it for a later time.  Some time after making the image, I found a way to make my fingerprint reader work again, but didn't save the instructions or the downloads for it.  I know, I'm beating my head against the wall.  Because of suspecious notebook behavior, I reloaded the image I saved and now I can't seem to find a way to make my fingerprint reader work again.  I do remember that it was an updated driver for my laptop that made the fingerprint scanner work again, but I don't remember what the updated version was.  If any of you could help, I will be truly greatfull.  Maybe, at some point, I can stop banging my head against the wall.   Thank you!

Read other answers
RELEVANCY SCORE 71.2

Hi,
I have bought the Dell Vostro 3560 couple of months ago and just updated to Windows 8.1. After this the DigitalPersona Fingerprint Reader software started to cause problems (sometimes doesn't work). I've updated all drivers to the latest version but can't find update for DigitalPersona Fingerprint Reader  and under my registered programs there is only 6.3.0.300 version which is over one ear old.
Could you advise how to update it please?
Thank you.

A:DigitalPersona Fingerprint Reader 6.2.0.300 update

Hi PiotrIr,
You should download and install “Validity Fingerprint Sensor Driver”. If you have difficulty in downloading the drivers please watch this video:

Downloading and Installing Drivers in the Correct Order
Hope this helps.

Read other 27 answers
RELEVANCY SCORE 70.8

The fingerprint reader on my W541 laptop stopped working.  It's been working for more than a year, and worked last week.  Now it's not working - not illuminated & doesn't read my fingerprint.  Going into 'Settings' (Windows 10), 'Accounts', & 'Sign-In Options', it says "Windows Hello is not available on this device".I believe 'Windows Hello' is the software that runs the fingerpront reader.Any ideas of what to look for to get this working again? I have not loaded any new software since last week (when the fingerprint reader was working).The last system update installed was:"Intel Corporation - Bluetooth - 11/14/2016 12:00:00 AM - 19.30.1646.853" - installed on 2/1/17 (4 days ago).The fingerprint reader worked OK after that update.  

A:Fingerprint Reader stopped working

First, look in the device manager and see what it says under Biometric Devices

Read other 1 answers
RELEVANCY SCORE 70.8

Just upgraded from Windows 7 Pro to Windows 10 Pro. The fingerprintreader has stopped working. I can find the option to set this up but instal is greyed out as no driver available. Cannot find one on any support forum? Anyone else with this problem and sorted it please?











Solved!
View Solution.

A:How do I get the fingerprint reader working on Windows 10

Aug 11. I have been running Windows 10 updates each day since upgrading and today after a reboot the finger print reader started working? and remembered my print as well. I guess Microsoft dropped in a fix for this (which works for me) so maybe something to try?

Read other 7 answers
RELEVANCY SCORE 70.8

The fingerprint reader on my T470 has been a little glitchy since I bought it - occasionally doesn't work, but usually resolves if I restart it. Just performed some sort of update, though, and since then the fingerprint reader hasn't worked at all.  I had to go back and figure out what my password was, which took a while since I've never used it before.Any ideas? I am not a computer person, so if I can't fix this really easily I'm going to have to get it repaired (it's still under warranty).

Read other answers
RELEVANCY SCORE 70.8

I've been using this fingerprint reader for 1.5yrs now. Lately when I turn on my computer, sometimes it's working and sometimes it has a red "x" over the icon in my startup menu in bottom righthand corner. I had to reboot 3x this morning before I could get it to work. It worked for a while and now nothing. There is no red x showing, but it's not scanning at all.

I went to HP site and downloaded lastest version of the reader, rebooted and still nothing. Any ideas?

I use Vista Ultimate op sys. My computer is HP HDX18t, 64 bit. (I installed Vista, 64bit version update from HP site.)

Thanks for your help!
 

A:Solved: HP fingerprint reader not working

http://www.paralaptop.com/hp-compaq...eader-not-detected-on-hp-pavilion-dv6700.html
some options on that site, if drivers are all ok and you sure device manager all happy then may be actual reader,dirty? greasy?
 

Read other 2 answers
RELEVANCY SCORE 70.8

I have a P70 with Windows 10. After I suspend, when I wake up my system, fingerprint reader has stoped working.

Read other answers
RELEVANCY SCORE 70.8

Hi all,
These two pieces of hardware have been working intermittently for the past several months but now have failed completely. Device manager recognizes them as on and working properly but neither of them detect anything, which makes me suspect a ribbon cable or something similar. Any leads on what could be causing this, or quick hardware possibilities to check? Thanks!

A:Touchpad and fingerprint reader not working

There is a ribbon cable connecting them to the motherboard but usually to reach it you have to first remove the keyboard and maybe the palmrest to see where it plugs in.

Read other 4 answers
RELEVANCY SCORE 70.8

Does anyone else have the problem of the fingerprint reader not working after hibernate? This is an intermittent problem, doesn't happen all the time, but frequently. Come out of hibernation, it is blinking, swipe my finger, nothing happens, blinking stops and the reader doesn't work after that. I have to enter my Windows password and it doesn't work for any websites. Have to reboot to re-engage the reader. I'm on Win 7 Home Prem 64 bit with latest drivers for the fingerprint reader and lastest update for Authentec software.











Solved!
View Solution.

A:Fingerprint reader not working after hibernate

So here's the solution(s) as found by Pokey and me: Option 1:  Computer, Properties, Device Manager, Biometric Devices, Validity Sensors, Properties, and the Power Management tab, Uncheck "Allow the computer to turn off this device to save power." Option 2:  Try disabling and enabling the "Credential Manager" service by going into Control Panel, Administrative Tools, Services, Credentials Manager.  Even though the Credentials Manager status is ?Started,? stop the Credentials Manager service and restart it. Find more information here:  https://support.authentec.com/Forum/tabid/318/forumid/49/threadid/600/scope/posts/Default.aspx Option 3:  Do both.

Read other 10 answers
RELEVANCY SCORE 70.8

Hi everyone, hope u'll be fine.. i bought new laptop hp probook 450 g3 last week.. but i m facing problem form 1st day.. The problem is my lappie fingerrpint reader/sensor not working . I update all drivers from hp site but fingerprint reader still not working.. if anyone know how to fix this problem kindly help me out of this problm please.. regards,awais











Solved!
View Solution.

A:hp probook 450 g3 fingerprint reader not working

@Muhammad-Awais? When you say not working. Do mean it will not scan??? Does it show in Security Settings??? REO

Read other 5 answers
RELEVANCY SCORE 70.8

My fingerprint reader has stopped working again. It started working after the last Windows 10 update, but after some time it just stopped working. I got a message saying to "swipe my finger slowly". Other times it said to "swipe finger more to the left" But no matter how many times I tried the reader just did not recognized my fingerprint. Now the reader's light is not even visible when I swipe my finger. I have not updated Windows again since I'm waiting for the latest update of Windows Creator to be available for my laptop.  All the other available updates for my laptop were supposedly installed on 4-17-17 Any help? Thank you.       

Read other answers
RELEVANCY SCORE 70.8

Lenovo T430 2344BPU, BIOS G1ETB0WW (2.70 )      I had this laptop 2 year ago, last year i've recieved the automatic update from original OS 7 64 bit to 10 64 bit when the OS 10 rolled out to the public.
the fingerprint stopped working , i tried every solution possible over the internet and provided in this forum unfortynately nothing work .
unfortunately i dont have any support center in Cairo, Egypt although Lenovo provided service center numbers.
Does anyone know how to solve this problem!!!!
Does anyone from Leovo read our posts and feel our pain and suffering!!!
ANYBODY home could Help !!!!!!!!!!!!!!!!
 
 
Mod:  edited Subject line with a problem description

A:T430 - fingerprint reader not working after Win 10...

I cannot confirm that the steps listed in this document work, but you might give it a try.     https://support.lenovo.com/us/en/documents/ht104227

Read other 2 answers
RELEVANCY SCORE 70.8

My fingerprint reader randomly stopped working a few days ago. I first noticed it when trying to log on to my computer because the reader doesn't respond at all and now it doesn't even give me the fingerprint reader option when it comes to the welcome screen.

Thanks in advance for this help, please let me know anything you need informationwise.
 

A:Fingerprint Reader Stopped Working

The only thing i can think of is uninstall then reinstall the driver for it and see if it works again. i have two ibm thinkpad laptops with that feature and i dont even use them because to me personally they are a nuisance and after one went haywire and locked me out of the computer i said i dont need this headache anymore.i had to take the hard drive out remove the driver for that and reinstall the hard drive. no more problems after that.
 

Read other 2 answers
RELEVANCY SCORE 70.8

This problem has been reported several times before, but no answer whatsoever  The fingerprint reader stopped working, apparently after a windows update upgrade I have tried EVERYTHING there is, from uninstalling and deleting the driver files then reinstalling, downgrading the drivers, rebooting, upgrading, updating chipset, video card and display drivers, updated BIOS, etc. etc. etc. and the best thing that can happen is for it to work a couple of times and stop working again... it is a less-than-a-month-old computer and it seems  MANY users are having this problem....I already ran Lenovo Diagnostics tool, Lenovo system update tool, Microsoft's windows update and have latest definitioins for everything, Microsoft trouble shooter recognizes the problem but can't fix it. the only thing I haven't tried is downgrading my windows 10 to a previous version... computer: Lenovo Ideapad Flex 5 Model 81C9Processor Intel Core 17-8550U @ 1.80GHzOperating system: Windows 10 Home 64-bit  Ver. 1803 Synaptics WBDI driver version: 5.5.2613.1050 Intel(R) UHD Graphics 620 ver. 23.20.16.4973 BIOS version 4QCN43WW(V2.07) Thanks for any help I can get to solve this annoying situation

Read other answers
RELEVANCY SCORE 70.8

Hope someone can help me with this, Windows update offer me newer driver for my fingerprint reader AuthenTec AES2501A and after that update reader simply stopped working. If I try to enroll fingerprints it sais Windows did not find any biometric devices, also it says same at logon screen and I always need type password which is annoying. There are no 7 drivers for my laptop model, only Vista. I upgraded from Vista to 7, driver was installed under Vista and it did always work with 7 with no problem, stupid me I went and updated it I removed driver and now when I do new hardware scan Windows can not find driver for my device or if I tell it look online, it will install same driver that does not work. Vista driver comes with ThinkVantage security solutions and the installer simply will not run under 7 (operating system not supported error). What to do? Is there any way to make installer not check my system? Or how I get driver out from exe file? I don't want install Vista and then 7 again and all the programs, I will spend all day on it

A:Fingerprint reader stopped working

  
Quote: Originally Posted by Kika


Hope someone can help me with this, Windows update offer me newer driver for my fingerprint reader AuthenTec AES2501A and after that update reader simply stopped working. If I try to enroll fingerprints it sais Windows did not find any biometric devices, also it says same at logon screen and I always need type password which is annoying. There are no 7 drivers for my laptop model, only Vista. I upgraded from Vista to 7, driver was installed under Vista and it did always work with 7 with no problem, stupid me I went and updated it I removed driver and now when I do new hardware scan Windows can not find driver for my device or if I tell it look online, it will install same driver that does not work. Vista driver comes with ThinkVantage security solutions and the installer simply will not run under 7 (operating system not supported error). What to do? Is there any way to make installer not check my system? Or how I get driver out from exe file? I don't want install Vista and then 7 again and all the programs, I will spend all day on it



You can use the vista driver if you install it in compatibility mode. to do this right click the installer>properties>compatibility mode>check vista. then install

Ken

Read other 9 answers
RELEVANCY SCORE 70.8

I used to use the Fingerprint Reader to login into my account, after installing Win7 (from Vista), finger-swipping is not working or not found as a device.

Biometric Devices: Authen Tec Inc. AE1610

A:Fingerprint Reader Not working with Win7

  
Quote: Originally Posted by dinomon


I used to use the Fingerprint Reader to login into my account, after installing Win7 (from Vista), finger-swipping is not working or not found as a device.

Biometric Devices: Authen Tec Inc. AE1610


Hi dinomon, Welcome to SF,

Have you install proper drivers for your Finger Print Reader device. If not go to their website. Download the Lastest drives for Windows 7 then install it. See whether it works or not.

P.S. Please fill the System spec so we know what are we dealing with.

Hope this helps,
Captain

Read other 5 answers
RELEVANCY SCORE 70.8

Hi. I probably damaged the fingerprint reader, trying to clean it ... Does anyone know if it is possible to fix or replace and who shounld I contact? Thanks, D.

Read other answers
RELEVANCY SCORE 70.8

When running on AC, close lid, open lid, and fingerprint reader does not work. Only functions after reboot.



T61p type: 6460-67U

Read other answers
RELEVANCY SCORE 70.8

Hello,I have a brand new T540P with a Validity fingerprint reader.  Rougly 80% of the time, the Fingerprint reader is unresponsive at the windows login screen after waking the computer from sleep. It works 100% of the time when booting from an off position, however. Once logged in, it also works 100% of the time. The issue only arises when logging into windows. Things I have tried-uninstalling/installing device in device manager and finger print manager pro software-setting fingerprints through both fingerprint manager pro software (lenovo) OR through the built in windows fingerprint control panel options-disabling "allow windows to turn off this device to save power" in device manager. I should note as well that I have another T540P that I ordered as a replacement. Both models experience the same issue. Is this a platform wide issue affecting all T540P models? This is frusterating.   










Solved!
Go to Solution.

A:Fingerprint Reader not working upon waking from sl...

Haven't heard about this issue before.If it stops working after resume, does putting it back into sleep then resuming again make it work?

Read other 9 answers
RELEVANCY SCORE 70.4

Envy laptop L8Y93AV. I just installed the latest Windows updates and now my fingerprint reader is totally inoperative, It does not flash or respond at all even when tying to puy in a new fingerprint. PIN sign in works fine. Short of removing the updates (I actually believe they are supposed to increase security. ) now what?

A:Fingerprint reader inop. after Windows update

Hi , You might be able to use this Validity Sensor Driver: sp72114 Validity Sensor V 4.5.289.0  Link : ftp://ftp.hp.com/pub/softpaq/sp72001-72500/sp72114.exe In general, Series 6 HP SimplePass can run on Windows 10.  It was, and continues to be, robust and sturdy code. If you have truly lost the Series 6 HP SimplePass program AND if you do not have an Export of your Webcards (website / password backup) -- then you might decide to switch to the newer, and still supported, Series 8 HP SimplePass program. Series 8 HP SimplePass is not an "upgrade" from the older Series 6 version of the program; it is different code - that is, a completely different rendition of the SimplePass product. Series 8 HP SimplePass is written by Softex. Series 6 HP SimplePass was written by AuthenTec. You may, of course, decide to try and run Series 6 HP SimplePass; the program may run with your newer Validity Sensor Driver. Series 6 HP SimplePass:sp63224 HP SimplePass V6.0.100.276 Win7-8 Link : http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63224.exe  Series 8 HP SimplePass:sp71729 HP SimplePass V8.01.46A W7-W10 32/64bit Link : ftp://ftp.hp.com/pub/softpaq/sp71501-72000/sp71729.exe  General rules: Pay attention to the Order of Events when (re)installing your driver and / or software:Sign-in Options matter ? if the system supports Native Windows fingerprint logon, you must assign and configure a PIN to e... Read more

Read other 1 answers
RELEVANCY SCORE 70

So my fingerprint reader isnt working. Tried hp simple pass but fingerprint option doesnt show up. Windows hello doesnt show up either. Tried updating the driver still nothing. Have tried a few different things from other forum posts to no avail. Any help will be greatly appreciated.

A:fingerprint reader on hp 8460p with windows 10 not working

1. Try steps from: http://support.hp.com/us-en/document/c037182402. Since this is a 8460P unit, install HP Client Security or HP Protect Tools software instead of SimplePass.

Read other 1 answers
RELEVANCY SCORE 70

Dears,             My T460p fingerprint reader not working when I join in my company domain, it works fine in local account. I used to use fingerprint reader in my previous laptop T440p without any issue both local and domain account in windows 10 pro. Please help me with this issue as it very annoying to type my long password.  

Read other answers
RELEVANCY SCORE 70

The FP reader does not work on my T450s under Windows 10, even though the drivers "Synaptics FP Sensors (WBF) (PID=0017)" are installed correctly.I can get into the Windows Hello Fingerprint Setup (snapshot below) but the FP reader doesn't do a thing.Following the steps suggested in Fingerprint-support-on-Windows-10-ThinkPad-T440-and-newer does not change anything. The notebook is brandnew and I didn't have Win 7 or 8 on it before for testing the FP reader, but the driver installed without any issues -- so I guess it's not a hardware problem. I'm happy for any suggestion. 










Solved!
Go to Solution.

A:Fingerprint reader not working on ThinkPad T450s u...

Issue resolved. It was indeed a hardware problem.

Read other 1 answers
RELEVANCY SCORE 70

My T440s' (20AQ) fingerprint reader constantly failed to be recognized by Windows 10. The system has been updated to the latest status with Windows Update and Lenovo System Update.  The LED of fingerprint reader does not blink at logon screen. Device manager cannot recognize its VID or Hardware ID. Resetting BIOS worked at beginning, but no longer work today. Separately resetting fingerprint reader in BIOS prompt "No Fingerprint reader attached" message. Does anyone have similar issue? I know I'm not alone.

























Screenshot (5).png ?240 KB

Read other answers
RELEVANCY SCORE 70

Dear all, since a few days my fingerprint reader is not working anymore. The device manager shows the reader but says it's not working (Code 10). I deinstalled the driver and downloaded it again as well as all other updates via Lenovo Companion. Does anyone has an idea what to do? Thanks in advance. 

Read other answers
RELEVANCY SCORE 70

Hi all, I recently purchased a ThinkPad E550 (20DF0040US) and the Fingerprint reader (Synaptics) was working when I first set up the machine but now, after a week's worth of ownership, it is no longer recognized. I searched the forums here and found that an older driver worked to solve the problem for others but it did not solve the issue for me. I tried to reinstall the most up to date driver and that didn't solve the issue either. I am running Windows 7 Pro which came installed on the machine. Some users indicated that Windows updates are the culprit but I cannot confirm this. All my Windows updates are current and there are no updates pending from Lenovo. Any suggestions would be appreciated. Thanks in advance.

A:Fingerprint Reader not working / no longer recogni...

Hi spinnin,
 
Welcome to Lenovo Forums!
 
Have you tried updating BIOS to the latest version, if not please find the below given link and update it to the latest version.
http://support.lenovo.com/in/hi/products/laptops-and-netbooks/thinkpad-edge-laptops/thinkpad-e550/do...
 
 
Keep us posted with the results, so we can assist you further.
Thank you, have a good day.
 
Did someone help you today? Click on the ?upper half star? at the left side of the post to thank them with a Kudo!
 
Regards,
Naveen.v

Read other 9 answers
RELEVANCY SCORE 70

Hi All, I recently (about a month ago) was one of the unlucky fellows who had microsoft sneak the windows 10 upgrade onto my W530 laptop. Long story short, everything seemed to be OK, with the occasional blip with the fingerprint reader when I had to manually enter my windows password. However, on a hard boot, the fingerprint reader always worked, which was critical as my computer has 2 passwords on start up that I do not remember and thus had always relied on a swipe of my finger.  Well that all changed yesterday. I was in windows when my computer crashed. Upon start up, i was immediately asked to enter in my supervisor/bios password without getting the chance to finger swipe. After multiple reboots, the same. The fingerprint reader wont turn on any more and I am locked out my my laptop.  Can anyone please help? anyway to get the fingerprint reader to switch back on???

Read other answers
RELEVANCY SCORE 70

Hello Lenovo team, I have a Lenovo ThinkPad Yoga 370 (20JH0023US) less than a year old, since we set it up out of the box, we have been unable to get the fingerprint reader to function. In Device Manager, it shows the device cannot start (Code 10). We have uninstalled, reinstalled with the latest drivers, performed a BIOS update. When we try to clear the Fingerprint data in the BIOS, it sits as "Resetting Fingerprint Data" and gets no further. We have also replaced the Fingerprint reader itself (under warranty) on the keyboard bezel and it is still not working. Can anyone assist in helping us get this working? Is it possible it's a bad factory image of Windows and maybe we should do a reset? Thanks in advance!

Read other answers
RELEVANCY SCORE 70

I just bought HP Probook 4530s Ci5Ram 6 GbHard 740 Gb1 Gb graphic card RadeonOperating system win7 64bit I downloaded the driver software and digital persona software from HP website, the device manager of my system is showing that the driver is installed correctly (Named as Biometric devices, and under it Validity sensor, its version listed is VFS471). But on windows log on it is showing detecting reader, and then reader is not detected. Same is happening in the software (Digital persona). I tried different softwares from different websites.  Please tell if you know something NEW. I said something new because I saw many people on many websites looking for that problem. But the problem is there. When I run the setup of Validity sensor driver, it install fine.Then I run the latest Digital persona software it says on its installation ("The system cannot verify that the fingerprint readers is installed"). And under it here is a option to SKIP that part. When I do it, it completes the installation and restarts the computer. After that same problem "Reader not detected" on windows log on.











Solved!
View Solution.

A:HP Probook 4530s fingerprint reader not working.

Hi,Uninstall driver and software for fingerpint reader. Resource:Uninstalling Software in Windows 7Uninstall or change a program in Windows 7 Download and install Validity Fingerprint Driver from here.Download and install HP ProtectTools Security Manager from here (inside this package there is software for fingerprint reader).Restart system and check the results.

Read other 10 answers