Over 1 million tech questions and answers.

Imaging device missing from device manager and built in webc...

Q: Imaging device missing from device manager and built in webc...

Hi i recently upgraded my system to windows 10. i never botter using the webcam when i hed windows 7 and i also never checked if imaging device was in device manager. but now searching in device manager imaging device is not there. there is no unknown device, no yelow exclamation marks. i did update windows all up to date, i have installed as many drivers i could get from hp site for the pc, imaging device still not appearing in device manager. i have installed cyberlink youcam whenever i open it says camera not detected. can any one please help

RELEVANCY SCORE 200
Preferred Solution: Imaging device missing from device manager and built in webc...

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Imaging device missing from device manager and built in webc...

Khaleed Please test the driver

Read other 2 answers
RELEVANCY SCORE 189.2

Hi All, after upgrading from Windows 7 to Windows 10 my HP TrueVision HD intergrated camera is not working. I visited the HP site to download the drivers and could not find any for Windows 10 for HP Pavilion dv6. I also cannot find the imaging link in my Device Manger. Please help/provide the suitable links to the drivers or your expertize to activate my intergrated camera.. Thanks in advance..

Read other answers
RELEVANCY SCORE 110

Hi,

I have a HP laptop Windows 10 and I'm having some problems with my integrated webcam. I wanted to uninstall and reinstall the drivers but when I go to Device Manager I don't see Imaging Devices...

Thanks for your help.

Serge
 

Read other answers
RELEVANCY SCORE 110

Been trying to install all-in-one printer/scanner/copier for a couple of weeks. Noticed that Imaging Devices is not listed in my Device Manager. Not sure if this is a Windows XP problem or not, but is there a way to add Imaging Devices back to the Device Manager?

Any help is appreciated.
 

A:Imaging Devices missing from Device Manager

Read other 10 answers
RELEVANCY SCORE 93.6

touchpad totally not fuctioning
mice and other pointing device is missing in my device manager after i install windows 8.1 in my acer E5-411 i cant use my touch pad even i finished install synaptics drivers 
 its so frustrating so many times i tried different options still it didnt work

need some expert opinion about this one

Read other answers
RELEVANCY SCORE 93.6

This 2 device drivers are missing ...2 codes are listed bellow. 1.     USB\VID_138A&PID_003F&REV_0104    USB\VID_138A&PID_003F  2.     ACPI\HPQ6007    *HPQ6007

A:missing Drivers from "other device" showed by device manager

 On your Support page. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_164537_1&swEnvOid=405... http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_164558_1&swEnvOid=405... http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_152184_1&swEnvOid=405...

Read other 1 answers
RELEVANCY SCORE 92.8

My PC (Windows XP) has a problem -- in device manager, all of the imaging devices are in broken state. They are listed under imaging devices, but they have the dreaded yellow circle and question mark on them.

This began to be a problem only fairly recently, with my scanner. Can't scan; get an error message. This is true despite replacing my previous scanner.

In Device Manager, the properties screen for the scanner (as imaging device, it's a multi-purpose and is working fine as a copier and printer) says:

"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Click troubleshoot etc."

I've been through the whole troubleshoot menu, with no results. Also been on the phone with HP tech and did the whole uninstall and reinstall thing (again) and it did no good. He told me it's a PC problem and I need to ask Dell about solving USB controller or BIOS issues.

Anyone have any idea what is going on inside my PC, and how I can go about fixing this? Thanks for reading and any advice.
 

A:Device Manager does not see Imaging Devices

Read other 9 answers
RELEVANCY SCORE 92.8

Hi,

I tried to fix some issues with my webcam "YouCam 6" and I don't see imaging device in device manager... I don't understand. Thanks for your help.

Serge
 

Read other answers
RELEVANCY SCORE 91.6

Hi all,

The "Display adapter" option is missing from my Device Manager. I did
re-install the OEM driver but it didn't help. I am mystified as to how to get it
to show up. I would like to install a new video card and I suspect I must
first resolve this software problem (already tried the card with no luck).

I had made some tweaks to WinXP some months ago in an effort to optimize it.
I don't remember what I did but I suspect that might have something to do
with it. I have looked through Microsoft and HP/Compaq support sites with
no luck. Any info I found seems to talk about using the Display Adapter to
make changes, not how to revive it.

My stock video drivers are loaded and working. Again, I just don't know how
to get Display Adapter to re-appear (and working) in Device Manager.

I ran a diagnostic app called AIDA32. Here are screen grabs of my:

* Windows Devices
* Physical Devices
* Device Resources
* Windows Video

Does anyone have any suggestions on how I can fix this issue? Any and all
suggestions are appreciated.

My System Specs:
* WinXP Home Ed, SP2 installed
* System: Compaq Presario SR1030NX
* Processor: AMD Athlon XP 3000+
* Processor Speed: 2166 MHz
* BIOS: KM400 / 3.03
* RAM: 512 MB
* Video Controller: VIA/S3G UniChrome Graphics
* Video Memory (on board): 64 MB

Cheers,

Mark
 

A:'Device Adapter' missing from Device Manager (XP)

Read other 8 answers
RELEVANCY SCORE 91.6

This problem started between noon and 3:00 PM on Friday 2/18. My Realtek PCIe GBE Family Controller device, which allows me to connect to the Internet via Ethernet cable, stopped appearing in the Device Manager window. Furthermore, the only place where my computer can find the device is in MSInfo32.exe


Name [00000007] Realtek PCIe GBE Family Controller
Adapter Type Not Available
Product Type Realtek PCIe GBE Family Controller
Installed Yes
PNP Device ID Not Available
Last Reset 2/18/2011 5:30 PM
Index 7
Service Name RTL8167
IP Address Not Available
IP Subnet Not Available
Default IP Gateway Not Available
DHCP Enabled Yes
DHCP Server Not Available
DHCP Lease Expires Not Available
DHCP Lease Obtained Not Available
MAC Address Not Available

***NOTE*** The Driver line was NOT FOUND in this entry, indicating that the driver is either missing or the system can no longer find it.

I am able to connect via wireless, though my signal strength with the nearest hotspot is 2 out of 5 bars at its best.

Could you send me a direct download link for the driver installation software that works best for my system? I have an HP Pavilion dv3-1075us machine running Windows 7 Home Premium x64. Processor is AMD Turion x2 64-bit.

A:HP Pavilion dv3 - LAN device missing from device manager

This is the driver from HP's site for Win 7 x64:

Realtek RTL8168C/8111C PCI-E Ethernet NIC Driver HP Pavilion dv3-1075us Entertainment Notebook PC - HP Customer Care (United States - English)

Bill

Read other 1 answers
RELEVANCY SCORE 91.6

Hello there,

i am trying to install a webcam for my friend. Every time we try to donwload the software to install the thing, it installs and then says that there is no webcam detected.

I have tried all 5 USB ports, reinstalled the driver 7 times through web and CD. Have bought two new cameras. Have done everything under the sun and now i ask for your help.

I think the problem is that Imaging Devices isnt a catagorie. The webcam (Creative Live! Vista Cam) is on 'Other' section of device manager. When i go to repair it, it completes and calls the driver Composite USB Device. if i close this and re-open it, it says the error again.

What can i do for help!

Thank you for your time
 

A:No imaging devices catagorie in Device Manager

There won't be an Imaging Devices section until an imaging device is installed properly on the computer.

It sounds like the USB ports aren't working correctly or the drivers have an issue.

You are installing the software before plugging in the camera right?

Also what version of Windows is on your computer?
 

Read other 1 answers
RELEVANCY SCORE 90.8

Hi all Am trying to capture the image from an HP t610 TC onto HP Device manager 4.7 sp3, but am getting the following - 2016-08-03 11:15:30 [Error Details]: Capture image to the Master Repository.Failure capturing PER-TC-HU.dd.gz to /Repository/Images/PER-TC-HU_6.Failed to execute CaptureImage task.ErrorCode: 34603008, Error Info: ../../Task/common/[email protected]: Failed to handle post image.../../Task/linux/[email protected]: Imaging operating failed.../../Task/common/[email protected]: Error Code: 8../../Task/common/[email protected]: socket select timeout. I have successfully send and captured files to/from the device. Any suggestions would be greatfully received :-)

Read other answers
RELEVANCY SCORE 88.8

When trying to fix my intergrated camera, i was looking for my imaging device tab in device manager and i dont know if its deleted or not but its not there and i cant use my camera..

Read other answers
RELEVANCY SCORE 88.8

Lenovo Thinkpad T510i

The intergrated webcam used to work. Iīve tried updating the driver from the Lenovo site and also physically removed the screen bezel to confirm the plug/jack hadnīt come loose, it hadnīt. I also checked in the BIOS/security/I/O but couldnīt find an option for enabling/disabling the intergrated camera.

Any help will be greatly appreciated, Iīve spent all day trying to solve this!!!

Cheers
Simon
 

A:Intergrated Camera not working - Imaging Devices not showing in Device Manager

Product ID: 4313 CTO
 

Read other 6 answers
RELEVANCY SCORE 88.4

I reformatted my Desktop and in the Device Manager tab, PCI Device was listed missing. I have no idea what I need to download and there is no sound from my computer.

OS: Windows XP Pro SP2

CPU Type: Intel Pentium 4 650, 3400 MHz (17 x 200)

Motherboard Name: Gigabyte GA-8I915P Duo Pro (3 PCI, 2 PCI-E x1, 1 PCI-E x16, 2 DDR DIMM, 2 DDR2 DIMM, Audio, Dual Gigabit LAN, IEEE-1394)

Motherboard Chipset: Intel Grantsdale i915P

Video Adapter: NVIDIA GeForce 6200 TurboCache(TM) (256 MB)

Audio Adapter: Intel 82801FB ICH6 - High Definition Audio Controller [B-1]
----

Under PCI Devices (info from Everest)

there's a whole heaps of info on it but the report is still reported missing.
Device Description
Broadcom NetXtreme BCM5750 Gigabit Ethernet Controller
Broadcom NetXtreme BCM5750 Gigabit Ethernet Controller
Intel 82801FB I/O Controller Hub 6 (ICH6) [B-1]
Intel 82801FB ICH6 - Enhanced USB2 Controller [B-1]
Intel 82801FB ICH6 - High Definition Audio Controller [B-1]
Intel 82801FB ICH6 - LPC Bridge [B-1]
Intel 82801FB ICH6 - PCI Express Port 1 [B-1]
Intel 82801FB ICH6 - PCI Express Port 3 [B-1]
Intel 82801FB ICH6 - PCI Express Port 4 [B-1]
Intel 82801FB ICH6 - SMBus Controller [B-1]
Intel 82801FB ICH6 - USB Universal Host Controller [B-1]
Intel 82801FB ICH6 - USB Universal Host Controller [B-1]
Intel 82801FB ICH6 - USB Universal Host Controller [B-1]
Intel 82801FB ICH6 - USB Universal Host Controller [B-1]
Intel 82801FB ICH6R - Serial-ATA/150 IDE RAID Controller [B-1]
Intel 829... Read more

A:Missing device in device manager

http://www.gigabyte.com.tw/Support/Motherboard/Driver_Model.aspx?ProductID=1802

Install the most recent chipset driver and then the audio driver.
 

Read other 1 answers
RELEVANCY SCORE 87.6

Okay add to the questions... when i first start my computer up now it says add new hardware and it says something like its searching...... for USB Imaging Device, windows was unable to locate driver for this device..whats this mean?? how do i fix this? I right clicked on my computer, properties, Device manger..there is a yellow ? beside other Devices the the little thing that comes below it has a yellow ? with(!) over it. USB Imaging Device..whats all this mean??? does it have anything to do with why i can install my new modem?
thanks much
Leigh
 

A:USB Imaging Device, windows was unable to locate driver for this device..whats this m

At some stage recently you have placed a new scanner/digital camera, or the likes of, in your computer. Windows hasn't been able to apply a driver to that device and so it asks you if you want to connect to the internet to try and find a matching driver on the microsoft web site. The problem is easily solved. If you still have the device connected and plan on using it, then grab the CD that came with it and follow the installation instructions on it. If you don't have it connected then go back to the 'my computer' 'properties' into 'device manager'. In there disable the imaging device that has the yellow ! next to it. And hopefully next time you restart, no more problem.
 

Read other 1 answers
RELEVANCY SCORE 87.2

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3831 Mb
Graphics Card: Intel(R) HD Graphics, 1723 Mb
Hard Drives: C: Total - 953766 MB, Free - 701586 MB;
Motherboard: PEGATRON CORPORATION, 2A9A
Antivirus: AVG Internet Security 2014, Updated and Enabled
My system is an HP All-in-One TouchSmart with a built in webcam. Skype cannot open it. The Device Manager does not list it as Imaging Device. Windows lists Code 43 as the reason for it being prevented to open. The driver is updated and checks out.I have no idea what to do. Help will be most welcome.
 

A:Built in webcam not recognized by device manager

Check this out, maybe it can help

http://technet.microsoft.com/en-us/library/cc725873(v=WS.10).aspx
 

Read other 1 answers
RELEVANCY SCORE 86.8

I have a HP Pavilion dv6707us Entertainment Notebook PC. I was using Home Premium 32 bit Vista but I did a clean installation with Home Premium 64 Vista. I downloaded and installed all the drivers from HP?s site for 64 Vista. After clean installation I am facing the following problems.1. Realtek HD Audio Manager is missing from Device Manager.2. Advanced tab is missing from BIOS.3. CD/DVD drive is not reading media.? Installed the latest Realtek driver. Its showing in control panel. But not showing in device manager. When I checked in Device Manager sound, video and game controllers only conexant audio is there realtek is missing from there.? Now I am unable to use my external mic and internal mic volume is very low.? Looked into few forums there I found I need to enable my on board audio in BIOS but when I checked into my BIOS there is no ADVANCED TAB .My system details are :-Operating System : Windows Vista Home Premium SP 1 64bit
Ram : 2 GB RAM
Graphics : Nvidia GeForce Go 7150
System Model : MCP67
System Type : x64 Based PC
Processor : AMD Athlon 64 X2 TK-57 dual-core processor 1.90GH
BIOS Version : F.32
SMBIOS Version : 2.4
Please please please help me??.

A:Realtek HD Audio Manager missing from Device Manager & Advanced Tab missing from BIOS

I have the same OS and use Realtek. The only Realtek shown in Device Manager, Sound.... is the Realtek High Definition Audio. Are you sure you installed the 64 bit driver? The driver I have is 6.0.1.6873.

In Control Panel, DVD/CD-Rom drives, is your drive shown? Are there any problems noted?

Read other 6 answers
RELEVANCY SCORE 86.4

IM TRYING TO USE SKYPE ,YOUCAM BUT BOTH APPLICATIONS WERE NOT ABLE TO RECOGNISE INBUILT WEBCAM.IRONY IS MY DEVICE MANGER IS NEITHER SHOWING IMAGING DEVICES OPTION NOR A DRIVER IN SOUND,VIDEO AND GAME CONTROLLERS.PREVIOUSLY IT SHOWED CYBERLINK WEBCAM VIRTUAL DRIVER UNDER SOUND,VIDEO AND GAME CONTROLLERS OPTION AND AGAIN IT WAS OF NO USE SINCE IT WAS NOT HELPFUL FOR VIDEO CALLING APPS IN RECOGNISING IN-BUILT WEBCAM.SO I UNISTALLED IT AFTER LOOKING FOR UPDATES,DISABLE/ENABLE AND EVERYTHING OF THAT SORTS.                    I WONDER IF THERE ARE ANY BIOS SETTINGS/REGISTRY  SETTINGS THAT NEEDS TO BE ENABLED/CHANGED SUCH THAT IMAGING DEVICES WILL BE SHOWN UP IN DEVICE MANGER OR IS IT THE WEBCAM WHICH IS DEAD.LOOKING FOR A QUICK UPDATE GUYS .ALSO I HAVE USED HP SUPPORT ASSISTANCE WHICH DOEN'T EVEN SHOW INFORMATION RELATED TO IMAGING DEVICES OR VIDEO DRIVERS. ANYKIND OF WORTHFUL FIX IS WELCOMED 

Read other answers
RELEVANCY SCORE 86.4

Hello My computer information is as follows:

Gateway NV53 Laptop
Ram 4gb
Window 7
CPU: AMD anthelon II dual core processor

The issue that my built in webcam is not recognized by any application including device manager
THe last time i took a picture with the camera was 4/30. So i don't think i can restore all the way back then. I noticed the problem when Skype said it couldn't find the webcam.

A:Device Manager and Skype does not recongnize Built-in webcam.

Hi there ... I would try downloading Hardware Vendor Detection .. From the Link below .. There are two Webcam Applications ... I do not know which one is needed .. You might find that Information in the Users Guide which is also in the Link ... You can also use Gateway Recovery Management to Re-Install the Driver

Gateway Support - Downloads & Support Documents - Notebook / NV Series / NV53

Read other 6 answers
RELEVANCY SCORE 85.2

I have a HP Pavilion dv6707us Entertainment Notebook PC. I was using Home Premium 32 bit Vista but I did a clean installation with Home Premium 64 Vista. I downloaded and installed all the drivers from HP’s site for 64 Vista. After clean installation I am facing the following problems.

1.     Realtek HD Audio Manager is missing from Device Manager.

2.     Advanced tab is missing from BIOS.

3.     CD/DVD drive is not reading media.

Ø   Installed the latest Realtek driver. Its showing in control panel. But not showing in device manager. When I checked in Device Manager sound, video and game controllers only conexant audio is there realtek is missing from there.

Ø   Now I am unable to use my external mic and internal mic volume is very low.

Ø  Looked into few forums there I found I need to enable my on board audio in BIOS but when I checked into my BIOS there is no ADVANCED TAB .

My system details are :-
Operating System        :           Windows  Vista Home Premium SP 1 64bit
Ram                             :           2 GB RAM 
Graphics       &... Read more

A:Realtek HD Audio Manager missing from Device Manager & Advanced Tab Missing from

Did you allow HP to scan for missing drivers?
 
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3648475
 
If your BIOS is missing a routine HP section...I'd start thinking "CMOS/RTC battery".
 
Loois

Read other 3 answers
RELEVANCY SCORE 85.2

The computer is a Toshiba Satellite laptop L555-s7929. The webcam came built-in, but it's not showing in Device Manager, nor can Device Manager find it when I search. I downloaded a driver, but when I tried to install the driver, I got a NotePad display of a computer program (with if-then statements, etc.) saying the device was not found. Does anybody know what's going on?
 

A:toshiba laptop built-in webcam not found in device manager

Is the cam turned on?
 

Read other 3 answers
RELEVANCY SCORE 84.8

 My skype cannot detect webcam. i can't found imaging device in Device Manage. i using Acer Aspire R14 R5 471T

A:i can't found imaging device in Device Manage. i u...

check if it's disabled:windows logo key + xdevice managerclick on View tab, click on Show hidden devices have a look if it's visible or there's an yellow exclamation mark

Read other 9 answers
RELEVANCY SCORE 84.4

I have a new x220, it's 3 weeks old.  No microphones or audio input devices of any kind are being recognized in both the device manager, the sound settings and on skype. Not only is there suppoes to be a built in microphone in the model, but the headphone jack also works as a headset and I have tried plugging in my iphone style headset with microphone with no luck. There simply aren't any drivers or recognition of whatever is driving the input of that microphone feed. How can I fix this so that it recognizes the onboard microphone options (both loudspeaker and headset)??

A:No Audio Input Devices - Built-in microphone not detected/not in device manager ????

Did you install windows by yourself?
 
In that case a dozend drivers and tools seem to be missing.
Install System Update  and execute it.
 
If you prefer manually install, download and install the drivers from Lenovo X220 driver matrix

Read other 9 answers
RELEVANCY SCORE 84.4

I have a computer where the DHCP service will not start due to a missing dependent service.  I did some digging and found that the NetBT.sys file was missing, as well as the related Registry keys and the NetBIOS over TCP/IP service in Device Manager.
 I tried copying the NetBT.sys file over from a known good XP SP3 machine, but before I went any further, I wanted to make sure I wasn't missing anything.  Can someone offer some suggestions to fix this without having to reload XP?
 
Thanks,
Phil

A:NetBT.sys missing, registry entries missing, and NetBIOS over TCP/IP service missing from Device Manager

For what it is worth, I pulled the netbt.sys file from a known good machine and putting it into the %Windows%\system32\drivers folder, then imported the registry keys for NetBT from the same machine.  Rebooted the computer and the "NetBIOS over TCP
IP" driver showed up in Device manager under "Non Plug-and-Play Devices".  It showed that it was started, and verified that the DHCP client server was started as well.  Everything was in good working order at that point.  Here are the registry
keys:
 

Windows Registry Editor Version 5.00
 
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT]
"Type"=dword:00000001
"Start"=dword:00000001
"ErrorControl"=dword:00000001
"Tag"=dword:00000005
"ImagePath"=hex
 
(2):73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,00,\
 
 
52,00,49,00,56,00,45,00,52,00,53,00,5c,00,6e,00,65,00,74,00,62,00,74,00,2e
 
,\
  00,73,00,79,00,73,00,00,00
"DisplayName"="NetBios over Tcpip"
"Group"="PNP_TDI"
"DependOnService"=hex(7):54,00,63,00,70,00,69,00,70,00,00,00,00,00
"DependOnGroup"=hex(7):00,00
"Description"="NetBios over Tcpip"
 
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Linkage]
"OtherDependencies"=hex(7):54,00,63,00,70,00,69,00,70,00,00,00,00,00
"Bind"=hex
 
... Read more

Read other 7 answers
RELEVANCY SCORE 80.8

a computer is running ME and was working fine, went to use the cd drive and it took the cd but would not work. went to device manager and the cd drive is not even listed and the primary and secondary are showing up in yellow.
This is what i get when going into device manager:

primary/secondary IDE controller (dual fifo)
device hard disk controller

Manufacturer Inte

Hardware verison Not available

devise status this device is either not present, not working properly, or does not have all the drivers installe. (Code 10)
 

A:cd missing from device manager

Read other 10 answers
RELEVANCY SCORE 80.8

Hi all, I am in a bit of a bind.

My device manager page is blank... but the computer is working, using it to post this actually.

I had to go into device manager and was about to revert the drivers to the older version when I noticed it missing.

I have ran Malwarebytes' and chkdsk from windows cd. Trying not to erase the whole drive and start from scratch.

A:Missing Device Manager

There can be various causes/solutions for this, so start by checking the most common.No Items Appear in the Device Manager List When You Open ItDevice Manager empty or blank in Windows?Device Manager malfunctions after you install Windows XP SP 2Some solutions may involve making changes in the registry. Always back up your registry before making any changes. If you are not familiar with working in the registry, then you should NOT attempt to make any changes on your own. Improper changes to the registry could adversely affect your computer and render it inoperable. ERUNT is an excellent free tool that allows you to to take a snapshot (backup) of your registry before making changes and restore it when needed.

Read other 5 answers
RELEVANCY SCORE 80.8

When I open Device Manager (windows 2000) the window is totally blank. When I make a new internet connection, there is nothing showing in the network connections window except Make New Connection (which doesn't work). Am I missing some windows files or is it something else? If I plug in the DSL cable the internet works fine. It's all very strange.
 

A:missing device manager

Sounds like you may have some services disabled or set to manual that should be starting with the machine. See if "Network Connections", "Shell Hardware Detection", and "Plug and Play" services are running and configured correctly.
 

Read other 2 answers
RELEVANCY SCORE 80.8

I have recently had to replace the HDD on my probook 6570b everything seems fine but device manager is asking for a base system device driver.  1. Base system device, Location: PCI Slot 2 (PCI bus 35, device 0, function 1) 2. HP Mobile Data Protection Sensor.  The driver for this device has been blocked from starting because it is known to have problems with Windows. Contact the hardware vendor for a new driver. (Code 48)

Read other answers
RELEVANCY SCORE 80.8

I downloaded the Norton removal tool from the Symantec website.
Followed the directions and restarted my computer.
It wouldn't start and I had to reboot it couple of times before it worked.
Something strange had happened, none of my devices were showing up. I checked "Device Manager" and was shocked to find nothing in the box! Every single device had disappeared!
This is why I couldn't connect or play any sounds, or do anything.
I then tried transferring my data (all my storys, poems etc) to my CD writer. But the computer didn't recognise that either.
So I rebuilt my "old" computer and connected to the internet.
And here I am!
Very angry!
I tried ringing Symantec, but got stupid answering machine that wasn't much help. I emailed them instead and they replied that "I" must have downloaded a piece of software that wasn't compatible to Norton.
I have just sent off another email, but as it contains strong langauge that I'd rather not repeat it on here.
So now I'm stuck. I can't remove my data from my computer, Wish I had "backed up" more often, but then I didn't think "Norton" would crash my pc. Used "Norton" on Windows 98 few years ago and had no problems.
Now I have completely lost faith in Norton and will never use them again.

Please, I need help recovering my data, took a long time writing my books. If I lose "all" my writing I will most probably end up h... Read more

A:Missing Device Manager

The easiest way to recover the data is to physically remove the hard drive that's in the affected computer and connect it to another computer as a slave drive (make sure you reset the jumper as per the diagram on the hard drive).

You should then be able to move the data to either that computer's hard drive, an external drive, cds or dvds, etc.

Once saving your data completed, reinstall your original hard drive as master in your computer, (setting the jumper again accordingly) reformat and reinstall XP if you have the Windows XP installation cd or use a Restore cd that may have come with the computer.

If you did not get any disks with your computer when it was new, there may be a restore partition which is accessed before Windows starts.
Boot the computer and look for instructions on the bottom of the screen - again - BEFORE Windows starts.

Read other 3 answers
RELEVANCY SCORE 80.8

Device Manager is Missing from Windows xp professional. Can any one give me correct procedure in order to get it back. Apart from re-installation of O/S or repair.

A:Device Manager Missing

I would really appreciate if you can give me the solution. And I will be very much thankfull to you.

Read other 2 answers
RELEVANCY SCORE 80.8

I am have another prob with my moms computer. The cd rom drive is not showing up on device manager. If I go into my computer it is there and if I insert a disk and click on it in my computer it will work but it will not auto play and I dont know why its not on device manager, otherwise I could check if auto insert notification is checked. She is running windows 95 THANKS
 

Read other answers
RELEVANCY SCORE 80

Ok my friend started her computer up the other day & she got a windows error for her xp & a screen came up giving her the number to call microsoft to reactivate her xp. She did all of that & the computer then came up fine but she could not hook to the internet. She was getting a modem error. I told her by the sound of it she needed to reinstall her drivers & stuff for the modem or else her modem had died & she needed a new one. She went & got a new one yesterday & so far has been able to load the software for the new modem but the computer can't find the new modem when it searches for it. I went down to try and help her and have discovered that NONE of her devices are even being listed under device manager. Not quite sure what is going on or how to help her. Any one got a clue out there as to what I need to do to help her????

Thanks

A:divces missing in device manager \ xp

run the m/b setup disk and see if they reappear

Read other 2 answers
RELEVANCY SCORE 80

OS: Win XP, SP2
CPU/Ram: 1.50 GHz, 512 MB
System Manufacturer: Dell Inspiron 8600

Recently, this is what I did.
1) I upgraded the BIOS

2) partitioned the HD

3) reinstalled the OS and upgraded to XP SP2 from SP1.

Now in the Device Manager, there is no section for "Ports"



In Device Manager, originally when I clicked "show hidden devices", under "Non-Plug and Play Drivers", there were warnings/error notices next to "parport" and "serial".



I can't print or sync my Palm. Other USB stuff works. Strangely, when I installed the Palm Desktop software, it let me sync one time. When I went into the settings to set up my e-mail sync, I got an error that the COM 1 port wasn't available and it switched to COM 3. I won't sync now.

I tried deleting the "parport" and "serial" drivers and they don't (immediately) return when I restart or "scan for hardware changes", but eventually show up again.

Thanks for any help you can give.

Mei2Qiang2

PS, if those photo links don't work, try these
http://photos.yahoo.com/smyhr
http://pg.photos.yahoo.com/ph/smyhr/my_photos

PPS
1) Dell says the BIOS won't cause a software problem, but......
2) In Safe Mode, it all looks the same.

A:ports missing in XP device manager

Did you reinstall all the drivers for your Motherboard?

Read other 3 answers
RELEVANCY SCORE 80

Hello.My product Name is HP ENVY 17.there are missing PORTS on device manager.OS is windows 10.How to check ports names.where are they located.How to add them to device manager.Thanks in advance.

Read other answers
RELEVANCY SCORE 80

I need help please,

I'm not sure when this originally occurred, but I'm missing the IDE/ATA Controllers section in Device Manager. They are currently listed in the Unknown section.

A few months ago I replaced the power supply on my 3 year old HP m7183c PC and about a month ago had to reinstall Windows (XP MCE SP2) due to problems caused by a Windows update.

I only just noticed that the IDE/ATA Controllers were listed under Unknown. It isn't causing any problems that I'm aware of... unless some issues I'm having with multiple external drives is related to this.

I've not been able to find anything relating to this and wonder if it's possible that I connected the cables incorrectly when I replaced the power supply. I imagine doing so would result in more serious problems than just relocating the devices to Unknown, but this is out of my range of experience. Possibly missing drivers is causing this???

I would appreciate any thoughts and advice anyone could offer.

TIA,
SBergstc
 

A:Missing IDE/ATA Controllers in Device Manager

Read other 13 answers
RELEVANCY SCORE 80

Hi,

I see there are other posts on this topic but so far I haven't been able to solve my problem.
Dell XPS M1210 XP sp3
I don't have Nero or Roxio

My dvd drive has simply disappeared from windows explorer and from Device Manager
It doesn't respond at all when i push the eject botton.

I have tried the Upper and Lower Filters fix but beside being able to remove just the Lowers as there were no Upper, nothing has changed.

I have removed te drive and put it back into place several times

I don't think its recognized by the Bios (but I am not sure about that, what should i see when pressing F2 at start up, if it were?)

Is the drive connected by IDE or ATA?
Under the voice IDE ATA-ATAPI controllers in Device Manager everything seems ok, so, can I ruled out a connection problem and go ahead and buy a new drive?
I wouldn't want to get a new one to find out the problem is somewhere else.

Is there a way to find out if the connection is ok?
I don't have another drive i can test it with unfortunately.

Any help would be greatly appreciated
Thank you
 

A:dvd rw drive missing in device manager

Read other 10 answers
RELEVANCY SCORE 80

I had been using the IE well until yesterday I cannot open any web page. I'm sure the network works fine, because I can receive/send email using outlook. I thought maybe the IE had some problem, so removed the IE 7, downloaded IE 8 using another PC, then installed the IE 8, but it still cannot open any web page. I checked the Network Connections, found "Unavailable - device missing" under MSN Connection manager.

What should I do to solve this problem?

Read other answers
RELEVANCY SCORE 80

Had a mate with the above issue, so I tried it out and sure enough nothing under his Device Manager so of course unable to read the discs!

No problems! Bring them all down to my place I said and we'll play with them there!

Cranked the old PC up, slipped in the DVD, green light working but ........nothing!

Didn't even show the device under Explorer .....................

Checked Device Manager and identical problem, nothing for CD/DVD Drive!

I then tried a DVD I know works and ditto, nothing!

Not be beaten, I inserted the disc on my wife's laptop and voila! Perfect, read the disc and all the contents there perfectly!

I did the usual "Scan for new Hardware" but a waste of time!

Had a look on Google and lo and behold up comes a zillion hits on this same issue.

Tried a couple of them with no luck but figure the guys on TSG are more savvy so anybody have any advice on how I correct this annoying issue thanks!

Gotta be something simple as it was working about 6 months ago perfectly, quite intriguing why the discs in question work on the wife's PC and not two others?
 

Read other answers
RELEVANCY SCORE 80

Hello,              For some reason my DVD CD internal drive in my Inspiron 3847 With the latest win 10 64 bit is not showing the DVD player in the device manager. I have reinstalled the Serial-ATA_Driver_N7YYC_WN_12.7.3.1001_A00 driver but still nothing. Can anyone offer any suggestions or ideas why iots gone all of a sudden? Thank you

A:DVD/CD Missing from Win 10 No IDT/ATA Controllers in Device Manager

Hello, I put a CD in the drive and it did spin up. I also rebooted then pressed F2 the SATA drive in hardware was set to AHCI and on the boot up screen the DVD/CD was listed after hard drive for boot up. I also tried to run the diagnosis for the optical drive and the message was that it could not find the optical drive. I did check the cables and they were all tight, and I removed them and plugged them back in without any problems. Any other suggestions?

Read other 3 answers
RELEVANCY SCORE 80

Although my HP3650 printer seems to be functioning OK, I cannot see any sign of it under "Device Manager", in fact there is no sub-heading for "Printers" at all.

Can anyone think why this might be?

Thanks.
 

A:Item missing from Device Manager in XP

View > Show Hidden Devices. Printers are controlled through their applet in Control Panel or in the Printers section of the Start Menu.
 

Read other 2 answers
RELEVANCY SCORE 80

I was starting to have problems with some of my hardware I think, but when I check for problems in my device manager all I see is a blank page, I have checked for all I know how to check. but I cant seem to find the problem.
Oh Yea Im using Win XP Pro with SP1, would that be why?
Thankls for the advice.

A:[resolved] Device Manager Missing??

I think this is starting to be a bigger problem. I (and others by searching the web) have just been recently hit with this also and no one can seem to find a fix, not even Microsoft yet.

Do you have any other problems like missing connection icons in your Network Conenctions folder (even though the network/internet still works), very slow display of My Compter or any problems with USB devices?

Those are my problems, and for some reason I was also prompted to reactivate Windows because of significant hardware changes, and there weren't any. I am in contact with Microsoft through email support as are others, but right now no one can seem to find a general fix that works. I would first reccomend to you to get updated to Service Pack 2.

Read other 5 answers
RELEVANCY SCORE 80

Vista Home Premium machine does not show CD/DVD drive in Device Manager. I have hit F2 during boot and it does not list anything for the drive either. I have removed the drive and re-inserted it but Windows does not find the "new" hardware. If I put a disc in the drive, it powers up, spins, and I can hear the head moving. Any way to get the drive recognized by the OS?

A:CD/DVD Drive missing in Device Manager

see if this helps, Hardware devices are not working or are not detected in Windows

good luck

Read other 3 answers
RELEVANCY SCORE 80

Working on daughter's Acer Aspire 7520 laptop.
DVD quit working back some months ago.
Can you fix it Pop?

DVD missing from device manager and also from Windows Explorer.
Found original DVD installation in inf DEV file.

Did the Regedit... delete upper/lower filters thing. No help.

DVD hardware seems OK, placed DVD in my laptop and it works fine.
Placed my DVD in Acer laptop.... does not function.

Reinstalled OS (Vista Home Premium) from hidden partition using ACER tools.
No change in DVD problem.

Reviewed all I could find on ACER web site regarding Aspire 7520... nothing.

Tore down computer and inspected internal connections, especially the hardware
that connects the DVD. Everything in proper order. No wear and tear. Computer is
in otherwise good shape. Fixed a Power Buttom issue with super glue.

Any suggestions would be appreciated.

Old Dave

A:Laptop DVD missing from Device Manager

Some Additional info.

Deleted two (2) programs pertaining to DVDs. No help.

"SCAN for Hardware Changes" from the device manager.... detects nothing.

DVD will eject by pushing button. Place a CD in DVD and the READ light comes on.
So... it's getting power and functioning internally. I just don't think that it's
communicating with the computer for some reason. I've flip flopped back and forth
about whether it's a hardware or a software issue. I'm leaning toward Software!!!

Old Dave

Read other 9 answers
RELEVANCY SCORE 80

Hello, I recently got the Blue Screen of Death for IRQL_NOT-LESS_OR_EQUAL, and when my computer came back on, it no longer recognized my USB ports. In Device Manger under Universal Serial Bus Controllers, the icons next to all the USB ports were greyed out and none of the ports worked. After browsing forums, most people suggested uninstalling them each and then restarting the computer and Windows should automatically reinstall them. I tried that, but now in Device Manger, Universal Serial Bus Controllers is missing from the list. I tried updating chipset drivers and BIOS drivers for this specific computer model, but the USB section of Device Manager is still not there. Any ideas?

A:USB Controllers Missing from Device Manager and I've tried a...

Hi @cobhc100, Welcome to the HP Forums! I read your post and wanted to reach out to help you! In your post, you had said that currently your Star Wars 15-an050nr Notebook gave you an error message-IRQL_NOT-LESS_OR_EQUAL. You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.  When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues. Please get back to me how this goes. Please click the Accept as Solution if you feel this post has helped you, or could help others. You can say thanks easily by clicking the Thumbs Up below! Thanks

Read other 3 answers
RELEVANCY SCORE 80

When I go to the Device Manager, there are no com ports listed under Ports (COM & LPT). The only thing listed under Ports is 'Unknown Device'. This is occuring on a Motion Computing Tablet Model LE 1600. We just recently had it sent back to have the motherboard replaced.

We didn't notice this problem until we attemped to connect a Leica GPS unit in ArcMap.

How do we get the COM Ports back?
 

A:COM Ports Missing - Device Manager

Be sure that the port is enabled in BIOS. Try removing it from Device manager and rebooting for reinstallation.

If BIOS allows it, and the above does not work, try changing the IRQ or memory used by COM1.
 

Read other 1 answers