Over 1 million tech questions and answers.

Random "Bad Pool Header" and "System Service Exception" BSODs

Q: Random "Bad Pool Header" and "System Service Exception" BSODs

I have been getting these "Bad Pool Header" and "System Service Exception" BSODs for about a day now (the "Bad Pool Header" one tends to pop up more often then the other btw). I ran a registry cleaner which didn't work and ran memtest this morning and it showed that my memory was fine. The BSODs tend to occur more often when I am playing a game or running some program that uses a bit more memory but it also happens when I am just on the internet. On the other hand, last night I did nothing but surf YouTube for 3 hours and didn't get a BSOD at all. However, since then I haven't been able to do anything for more than 10 minutes (without being in safe mode) without it crashing, and this morning it completely froze until I turned it off. My OS is Windows 7 Home Premium 64bit. It came preinstalled from the manufacturer and unfortunately I do not have the install disc. The entire laptop is less than 2 years old and there have been no major hardware changes and I have never reinstalled the OS.

RELEVANCY SCORE 200
Preferred Solution: Random "Bad Pool Header" and "System Service Exception" BSODs

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Random "Bad Pool Header" and "System Service Exception" BSODs

UPDATE: Another BSOD just happened after I left the computer idle for a couple of hours except this one said something about Asdsm.sys.

Read other 1 answers
RELEVANCY SCORE 264

I have been getting these "Bad Pool Header" and "System Service Exception" BSODs for about a day now (the "Bad Pool Header" one tends to pop up more often then the other btw). I ran a registry cleaner which didn't work and ran memtest this morning and it showed that my memory was fine. The BSODs tend to occur more often when I am playing a game or running some program that uses a bit more memory but it also happens when I am just on the internet. On the other hand, last night I did nothing but surf YouTube for 3 hours and didn't get a BSOD at all. However, since then I haven't been able to do anything for more than 10 minutes (without being in safe mode) without it crashing, and this morning it completely froze until I turned it off. My OS is Windows 7 Home Premium 64bit. It came preinstalled from the manufacturer and unfortunately I do not have the install disc. The entire laptop is less than 2 years old and there have been no major hardware changes and I have never reinstalled the OS.

A:Random "Bad Pool Header" and "System Service Exception" BSODs

UPDATE: Another BSOD just happened after I left the computer idle for a couple of hours except this one said something about Asdsm.sys.

Read other 4 answers
RELEVANCY SCORE 191.2

So over the past few days, one of my PCs have been getting random BSODs (system service exceptions), and I haven't been able to figure out what the cause is. I haven't installed or modified any software of hardware; it's just randomly started blue screening. It also occurs randomly, whether I'm gaming, browsing the web, etc. I'm at a loss here unfortunately and was hoping someone here could help me out. I've attached the appropriate logs and everything to the post. Let me know if more information is required.

Thanks!

DESKTOP-ND5T8AB-Thu_09_22_2016__04151_08.zip

Read other answers
RELEVANCY SCORE 186

Hello guys, the last week I've been strugling with these nasty BSODs. At first I thought it was my HDDs as ntoskrn.exe somewhat hinted towards that from googling it. My HDDs have been causing a lot of trouble earlier as well due to their somewhat long years of service. However, I've recently reformated my computer and installed W7 on a brand new Corsair Force GT 120GB SSD hoping the BSODs would go away, they didn't.

I googled BSOD and I stumbled upon this forum and I thought I'd give it a try. I'm somewhat desperate, as I need my computer working for both work, school and amusement.

I've been trying to run Memtest in order to test my memory but without any results. I'm also currently running on only on 4GB chip instead of two, to see if the problem still exists. Also, without any results.

This is the second time I'm writing this thread btw, I was just about to post it and my PC crashed.

Here is my two logs + dxdiag (last crash didn't generate a log oddly enough).

Here is additional hardware/gear that I use:

Razer Megalodon 7.1 Headset
Razer Naga
Logitech G19
Logitech C920 (Webcam)
Corsair 750W PSU

My temperatures are also good. Both CPU and MB idles at around ~25. GPU's all good too. I'm also using a Corsair 650D chassi with dustfilters at both air-income so dust is minimal. On top off this, I use airpressure to clean away dust somewhat regularly and I also did exactly this 2 days ago when I reinstalled the pc.
... Read more

A:BSOD - "Memory management", "Bad pool header", "ntoskrnl.exe"

Are you over-clocking? Is the bios set to its defaults? Is the SSD set on a SATA 3 port in AHCI mode?
 

Read other 5 answers
RELEVANCY SCORE 177.2

Hi, I am having a problem with my newer computer, I just got this rig a few months ago and never had a problem until last Thursday. It Blue Screened on me while I was installing ARC GIS 10.1. From then on it randomly crashes. (I have previously installed ARC GIS 10 and never had a problem.)

I keep things updated (windows and drivers) and I do think windows forced through an update earlier that day. I un installed ARC GIS 10.1 and the windows update, didn't make any difference. I have also ran the Windows Mem test and Auslogic BoostSpeed/ Registry repair. I keep getting "Bad Pool Header" and "Page In Nonpage Area" and I can't seem to find something that triggers it. So far it hasn't crashed in Safe Mode without network access. I tried it once with access and it crashed. Currently have windows checking the drives for errors ( I have 4).

I think I attached the proper dump files. This is my work computer so this is kind of causing a big problem. Thanks in advanced for the help!!

A:BSOD "Bad Pool Header" and "Page In Nonpage Area" Runs in Safe Mode

Welcome aboard.

The crash dump you supplied, suggests the display driver failed there.

Code:
fffff880`0c995858 fffff880`10018000Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x980000
Go to Drivers - Download NVIDIA Drivers, follow option two to search for the appropriate driver for your system automatically, and install it.
Let us know how it worked.

Read other 3 answers
RELEVANCY SCORE 171.2

Hi everyone,

I recently have noticed more and more BSODs. I had this problem about 6 months ago and was able to track it down to drivers that came from Daemon tools. I cleared all that out and it fixed the issue. I don't think these new BSODs are related but they might be.

This seems to be happening randomly. It happens roughly every 2 weeks and early in the morning (1am, 6am, 9am, etc.) but not at a consistent time. As far as I can tell, I am not doing anything or leaving open any specific program that triggers this. There doesn't seem to be a consistent pattern.

I ran the DM Log Collector and uploaded the zip file here. Any help would be appreciated. Thanks!

A:BSOD - Happens randomly. "Bad Pool Header", "DRIVER_VERIFIER"

Code:

Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Downloads\MUSICMACHINE-Wed_10_22_2014_142816_61\102214-20108-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Machine Name:
Kernel base = 0xfffff800`03013000 PsLoadedModuleList = 0xfffff800`03256670
Debug session time: Wed Oct 22 00:31:30.751 2014 (UTC + 6:00)
System Uptime: 6 days 13:12:26.826
Loading Kernel Symbols
...............................................................
................................................................
.....................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck... Read more

Read other 9 answers
RELEVANCY SCORE 171.2

Hey all, I've gotten a couple blue screens over the past couple of days. I just replaced my GTX 660 with a 960 over the past weekend and received a Bad pool header BSOD on the 9th, then today (the 11th) 2 Reference by pointer BSOD's. I've done some research and it seems to all point to driver errors. My brother just got the same GPU and is having a massive amount of blue screens with slightly different errors. Is this an issue with Nvidia?

Thanks for your help! All req'd info should be attached below

A:3 BSOD's after new GPU, "Reference by Pointer" and "BAD POOL HEADER"

Hello, papasmerf767. I will try to help you, but I need you to do something for me.

Please fill out your System Specs




   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.



If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you do not know what your components are, this will help you accomplish this task. System Info - See Your System Specs. Please list the as detailed as possible with Manufacturer and Model number. Also, please include your PSU and CPU Cooler.

You had 2 dump files


Code:
REFERENCE_BY_POINTER (18)
Arguments:
Arg1: fffffa800c7da570, Object type of the object whose reference count is being lowered
Arg2: fffffa8013ccf3a0, Object whose reference count is being lowered
Arg3: 0000000000000001, Reserved
Arg4: 0000001000000000, Reserved
The reference count of an object is illegal for the c... Read more

Read other 3 answers
RELEVANCY SCORE 170.4

hey,
Recently I have been getting BSOD's with the error "System Service Exception". I have Windows 7 Ultimate, 64-Bit. All of the parts of my PC are less than 6 months old. The crashes are random. Any help identifying the problem would be appreciated. Thanks

A:BSOD at random times, "System Service Exception"

You have a D-Link DWA-125 Wireless N 150 USB Adapter(rev.A2) - Win7 doesn't like these devices, and when coupled with older (Vista-era) drivers it will spit out BSOD's rapidly! Here's my rant about these devices:





Quote:
I do not recommend using wireless USB devices. Especially in Win7 systems.
These wireless USB devices have many issues with Win7 - and using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.


Turn off Driver Verifier - it's not putting out any useful information. In general this means that it's either hardware or Windows - but that all depends on the settings that you used to run it.

Video drivers date from 2011, please visit Global Provider of Innovative Graphics, Processors and Media Solutions | AMD and download the most recent version of the video drivers for your system.

Beyond that, please start with these free hardware diagnostics: Hardware Diagnostics

If the above steps don't stop the BSOD's, please zip up and upload any new memory dumps with your next post - and we'll see what we can figure out from there.

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs

- Further info on BSOD error messages available at: http://www.carrona.org/bsodin... Read more

Read other 7 answers
RELEVANCY SCORE 166

Hello, so I've been experiencing a large amount of BSOD's when I game but I've recently upgraded to windows 10 in hopes of the issue possibly being fixed so the old crash dump files are gone. One bsod occured today, so I'll leave a download for it below, thanks for any help

Specs: Processor
AMD FX(tm)-6300 Six-Core Processor
Video Card
AMD Radeon R9 200 Series
Memory
8.1 GB
Operating System
Microsoft Windows 10 (build 10240), 64-bit

A:Random BSOD when gaming "BAD POOL HEADER"

Hello Ghost Prodegy, Please upload the BSOD Posting instructions, BSOD - Posting Instructions - Windows 10 Forums. Also,

Please fill out your System Specs
   Information
Your System Specs will help us to help you, and doing it in this manner will make them available to all helpers in every post and keep us from hunting for them. We ask that you fill them out in as much detail as possible including Desktop or Laptop, Model number if it is an OEM computer and all components with the Manufacturer and Model number if possible.
[LEFT]If you will go to your last post and click the 'System Specs' in the bottom left of the post, you will find a link to update your system specs. Please fill those out in as much detail as possible, making sure to click save at the bottom of the page. If you would like to know what we would like, you can click 'My System Specs' at the bottom left of this post to see mine. If you are unsure how to do it, maybe this will help System Specs - Fill in at Ten Forums - Windows 10 Forums



The dump file you uploaded sys this


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
***************************************************************************... Read more

Read other 30 answers
RELEVANCY SCORE 159.6

Hi, I'm having BSODs on my new custom PC build running Windows 10. I am sure this is probably just a driver issue but I'm unaware of how to figure out which driver.

I've uploaded the debug report. Please let me know if you have any ideas or help.

AJ-DESKTOP-Sun_06_19_2016_200102_65.zip

Thank you!

Read other answers
RELEVANCY SCORE 153.6

Hello!
Title said it all.. on Skype the exact moment I click on Log In, I get this BSOD... My PC is quite new and never had this problem with skype before.
Would appreciate if you could help me.
Included the dmp and rest of the files...
Thanks
NOVIN_PENDAR.zip.

Read other answers
RELEVANCY SCORE 153.6

Hi, I've had several sporadic BSOD, at first I thought it was my old sound card (Audigy0090). For a couple of days BSOD were more recent and after trying several unofficial drivers, I decided to remove it and use the sound card on the motherboard.
Today I have played about 4 hours to "Tropico 5" until I had another BSOD, with older sound card was every 30-45 minutes.
Time ago I played Assassins Creed Unity (with the old soundcard) and never had BSOD with more than 4-5 hours of play.
I have an OC, but is stable. I played games like BF4 over 200 hours without failure (under Windos 7) in Windows 8.1 10-20 hours without problem.
Greetings. Sorry use a translator.

Attachment 55522

A:BSOD playing "Tropico 5" system service exception

Update drivers in red, and enable Driver Verifier: Using Driver Verifier to identify issues with Drivers - Windows 7 Help Forums

Code:
emupia2k.sys Mon Apr 9 15:08:10 2007 (461A3ABA)
Creative E-mu Plug-in Architecture Driver
http://www.carrona.org/drivers/driver.php?id=emupia2k.sys

ctsfm2k.sys Mon Apr 9 15:08:11 2007 (461A3ABB)
Creative SoundFont Management Device Driver
http://www.carrona.org/drivers/driver.php?id=ctsfm2k.sys

ctoss2k.sys Mon Apr 9 15:08:14 2007 (461A3ABE)
Creative OS Services Driver
http://www.carrona.org/drivers/driver.php?id=ctoss2k.sys

ha10kx2k.sys Mon Apr 9 15:08:15 2007 (461A3ABF)
Creative Hardware Abstract Layer Driver
http://www.carrona.org/drivers/driver.php?id=ha10kx2k.sys

ctaud2k.sys Mon Apr 9 15:08:29 2007 (461A3ACD)
Creative Audio Driver (WDM)
http://www.carrona.org/drivers/driver.php?id=ctaud2k.sys

ctprxy2k.sys Mon Apr 9 15:08:30 2007 (461A3ACE)
Creative Audio Driver (WDM)
http://www.carrona.org/drivers/driver.php?id=ctprxy2k.sys

COMMONFX.DLL Mon Apr 9 15:08:38 2007 (461A3AD6)
Creative Common FX Plug-in
http://www.carrona.org/drivers/driver.php?id=COMMONFX.DLL

CTAUDFX.DLL Mon Apr 9 15:08:39 2007 (461A3AD7)
Creative Audio Driver (WDM)
http://www.carrona.org/drivers/driver.php?id=CTAUDFX.DLL

CTSBLFX.DLL Mon Apr 9 15:08:42 2007 (461A3ADA)
Creative SB FX Plug-in
http://www.carrona.org/drivers/driver.php?id=CTSBLFX.DLL

kx.sys Fri Sep 18 00:45:22 2009 (4AB2BC02)
kX Audio Driver - Eugene Gavrilo... Read more

Read other 61 answers
RELEVANCY SCORE 153.2

I've had a dozen or more System Service Exception BSODs, primarily while playing Star Wars Battlefront. These happened both before and after I upgraded recently to Windows 10.

I've tried reverting and reinstalling my graphics driver, with no result. Any advice or suggestions on how to fix this would be greatly appreciated.

Help me, Obi-Wan.

Recent crash log: JOHN_DESKTOP-Sat_01_02_2016__23413_00.zip

A:Multiple "System Service Exception" BSOD

Hi aiede,

Welcome to the 10forums.

Please uninstall Norton and use Windows Defender as alternative while troubleshooting
Norton/Symantec - Uninstall Completely - Windows 7 Help Forums

In the 7 most recent crashes Norton drivers have been flagged everytime, below the short output of it.

Code:
ffffd000`226f3668 fffff801`ac2a35b3Unable to load image \SystemRoot\System32\Drivers\NAVx64\1605050.00F\SYMNETS.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMNETS.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMNETS.SYS
SYMNETS+0x235b3
ffffd000`25e982f8 fffff800`28383e72Unable to load image \??\C:\Program Files (x86)\Norton AntiVirus\NortonData\22.5.0.124\Definitions\BASHDefs\20151218.001\BHDrvx64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for BHDrvx64.sys
*** ERROR: Module load completed but symbols could not be loaded for BHDrvx64.sys
BHDrvx64+0xa3e72
ffffd000`249b5c60 fffff800`3548b698Unable to load image \??\C:\Windows\system32\Drivers\SYMEVENT64x86.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMEVENT64x86.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT64x86.SYS
SYMEVENT64x86+0x1b698
ffffd000`226f3038 fffff801`ac392899Unable to load image \??\C:\Program Files (x86)\Norton AntiVirus\NortonData\22.5.0.124\Definitions\IPSDefs\20160101.001\IDSvia64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for IDSvia64.sys
*** ERROR: Module load comp... Read more

Read other 0 answers
RELEVANCY SCORE 152.8

In Windows XP, fully updated, I have several folders full of mp3's and want to see the bit rate and duration. I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

But all the figures in the "Duration" column appear to be in "hours" and "minutes", so I see "00:04" or "00:03", but what I want is "minutes" and "seconds".

Any thoughts as to how to change this?
 

A:Solved: Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

Read other 16 answers
RELEVANCY SCORE 151.2

I am running Windows XP SP3, fully updated, on an Acer lap top PC.

I have several folders full of .mp3's and want to see the bit rate and duration. To do this I right click on a column heading and select "Bit rate". I then click on "More..." so I can get to "Duration", and I select that one too.

The two new columns appear, but the format of the "Duration" column appears to be "hours:minutes", so I see "00:04" or "00:03" for most .mp3's, when what I want to see is 'hours:minutes:seconds", e.g. "00:03:45".

This also happens for video files (.avi files), e.g. all my episodes of "Heroes" (sad, I know) have a duration of "00:42" instead of "00:42:xx".


Here are two pictures showing the problem with the .mp3's. The first is of Explorer showing the Duration as "Hours:Minutes":




The second picture is of the properties window of the first .mp3 in the list above:




I copied some .mp3 files to another (old) PC on my home network, and it displayed the duration field correctly:




Also, the properties window correctly shows the duration also:





I'm not the only person to have this problem. I received a private message from a member of another forum where I posted about this problem several weeks ago. That person also has the same problem with the duration field.

The tech guys on that forum were unable to find the source... Read more

A:Windows Explorer "Duration" Column - no "Seconds", just "Hours" and "Minutes"

* bump *

Tricky, this one!

Read other 8 answers
RELEVANCY SCORE 150.8

Fresh install of EMET 5.52 on Windows 10 "Anniversary edition" 64-bit, clicking on the Trust configuration button produces:

"Unhandled exception has occurred in your application." ...
"Customized cultures cannot be passed by LCID, only by name.
Parameter name: culture"

So, two issues:
1. This bug needs to be investigated, in any case; and
2. Until then, how might I see/edit the Certificate Trust rules (to work around the perennial problems of EMET not staying up to date with e.g. Facebook certificates)?

thanks,
-Jay

Read other answers
RELEVANCY SCORE 150.4

Playing world of tanks I had a BSOD that said "Bad Pool Header" then of course a bunch of stuff that means nothing to me... I have downloaded the SF Diag tool and will attack the zip with my dumps/diag info here...

As a Side note... the BSOD does the memory dump then supposedly "restarts" the computer but mine just sits there on a black screen until I manually hold the power button down to turn it off then turn it back on....

A:BSOD Playing World of Tanks "Bad Pool Header"

Code:
BugCheck 19, {3, d2eaf600, ac212f78, d2eaf600}

*** WARNING: Unable to verify timestamp for avgidsshimx.sys
*** ERROR: Module load completed but symbols could not be loaded for avgidsshimx.sys
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+312 )

Code:
Usual causes: Device driver
avgidsshimx.sys seems to be a driver which is causing the crash, and linked to AVG, therefore I suggest uninstalling AVG with the offical installer (see link below)

Uninstall AVG:


Code:
Start Menu\Programs\AVG
Download tools and utilities | AVG UK
Uninstall Spybot - Search & Destroy:


Code:
Start Menu\Programs\Spybot - Search & Destroy
The later editions of AVG have been known to cause some stability issues with Windows 7, furthermore I would suggest uninstalling Spybot, as AVG and Spybot are both real-time protection programs and therefore are clashing with each other and producing crashes.

You can run full scans with MSE and Malwarebytes:Microsoft Security Essentials - Microsoft Windows
Malwarebytes : Free anti-malware download
Remember to install the free version of Malwarebytes not the free trail; untick the free trail box during installation. Microsoft Security Essentails has proven to much more stable and less problematic within Windows 7, than other AV suites available to use. Remember to update the security definitions for both MSE and Malwarebytes before scanning your system.

Uninstall Free Window Registry Repair:


Code:
Start Menu\P... Read more

Read other 9 answers
RELEVANCY SCORE 150

Recently had my work laptop upgraded to Windows 7 from XP. Everything worked fine for one week. Then I started getting the BSOD error " Bad pool header". My computer will repeatedly shut down to protect windows. I notified my IT department and they believe that I corrupted the hard drive, as I have local admin rights. they provided me with a loaner computer and loaded my backup system on to this laptop. Worked great for a week and then again started getting " bad pool header and new error "page fault in non paged area. They believe I again corrupted the hard drive. The only software I installed is a program I use for work "Form Max" which other users have been using successfully in Windows 7. I used the DM log and have attached the dump files. Any assistance would be appreciated.

A:BSOD error " Bad pool header and page fault in non paged area"

Just discovered the original attachment was blank This one I checked and it does have files. Would appreciate any help that can be provided.
Thanks.

Read other 1 answers
RELEVANCY SCORE 149.6

"bad pool header" blue screen crashed on me while playing Battlfield 3

? OS - Windows 7 x64 OEM
? What was original installed OS on system? - Windows 7 x86
? Age of system (hardware) - 5 years old
? Age of OS installation - have you re-installed the OS? - 5 years old, does update to 64 bit count?
? CPU - Intel Core 2 Duo E6750 2.66GHz
? Video Card - ATI HD 3870
? MotherBoard - Gigabyte GA-P35-DS3L
? Power Supply - brand & wattage - Antec 550W

Thanks in advance

A:BSOD: blue screen "Bad pool header"

NOTE: I have severe eye problems. If I do not respond to your postings, please PM another staff member for assistance.


Quote:




Daemon Tools (and Alcohol % software) are known to cause BSOD's on Win7 systems due to the sptd.sys driver.
Please uninstall the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): DuplexSecure - FAQ




9 memory dumps from 01 Aug to 31 Oct 2011 (3 months)
5 different BSOD error codes
4 different causes are blamed.
This is usually a pattern for a hardware failure, but it can be cuased by incompatible software, faulty low-level drivers (such as the sptd.sys driver in Daemon Tools), or even by malware.

If the above procedure doesn't stop the BSOD's, please run Driver Verifier according to these instructions:

Quote:




Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can rest... Read more

Read other 1 answers
RELEVANCY SCORE 149.6

Good evening, after re-installing Win7 pro today I got a BSOD for the first time since I've had this machine.
Did Memtest86 (2 passes) and the memory seems ok. I really would like to know what's going on.
Maybe someone can tell me something from the .dmp file.
Thanks a lot

Read other answers
RELEVANCY SCORE 149.6

Firstly, apologies if this is an issue that's been dealt with elsewhere (if so, I'd appreciate a pointer - I couldn't find anything dealing with this specific problem through a keyword search).

I'm running Windows XP Home with SP2 (which I installed some time ago, and didn't cause any problems that I noticed).

But recently, my computer turned itself off - and every time I turn it on, straight after startup I get a BSOD with the following details:

BAD_POOL_HEADER

STOP: 0x00000019 (0x00000020, 0xFEC94518, 0xFEC94620, 0x0A210001)

The system seems to run fine in safe mode, but I haven't been able to use any debugging programs, etc, 'cause I didn't have them installed before the crash, and I can't figure out how I can do install them within safe mode, which is the only way the system will run.

The only thing I've changed on the system recently is that I installed an update of MSN Live Messenger - but I've disabled automatic startup which hasn't made any difference; and I haven't been able to reinstall it b/c, again, I can't/don't know how to install/uninstall programs in safe mode.

Any help would be greatly appreciated.

A:"Bad Pool Header" BSOD - no apparent reason

are you using a hp scanner or printer

Read other 3 answers
RELEVANCY SCORE 149.6

Hi, my computer is an HP P7-1245 desktop
Specs : i5 - 2400
8 gb ram
1 tb hdd
randeon hd 7450 video card

So I first bought this computer during march 2012, but it broke down and went in for repairs in july. So I guess this computer is about 2 months old? The problem was today I encountered a BSOD and i saw "Bad pool headeR" as the error. Please help!

A:BSOD "Bad pool header" first encounter when on desktop

Welcome to Seven Forums Willy.

http://www.sevenforums.com/crashes-d...tructions.html

Run a RAM test.

RAM (memory):
This will require memtest on a bootable CD or USB stick.
RAM - Test with Memtest86+

Read other 4 answers
RELEVANCY SCORE 149.6

Hello ,

Since Few Days Im getting BSOD after changing settings of my ATI Mobility Readon HD 5650 graphic card settings to all Maxium Level(using 100% of graphic card).

After getting First BSOD indicating that bad video driver , i uninstalled graphic card driver and again installed to default settings .

Again now it is showing BSOD , this time it is displaying error message as " Bad Pool Header Data " . details as follows :

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 19
BCP1: 0000000000000020
BCP2: FFFFFA80017A24D0
BCP3: FFFFFA80017A2B80
BCP4: 00000000046B4E10
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\031612-37549-01.dmp
C:\Users\UDAY\AppData\Local\Temp\WER-71308-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Iam also uploading the "Windows_NT6_BSOD_jcgriff2" and "Perfmon html" files as rar.

please go through and solve my problem

Thanking You.

A:BSOD with error msg "Bad pool Header Data"

1. The single DMP blamed Avast.
Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST.
http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows
2. Please run the System Update Readiness Tool (SURT) and then update to SP-1

32 Bit

Download: System Update Readiness Tool for Windows 7 (KB947821) [February 2012] - Microsoft Download Center - Download Details

64 Bit

Download: System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [February 2012] - Microsoft Download Center - Download Details
Now update to SP-1

Learn how to install Windows 7 Service Pack 1 (SP1)

Read other 4 answers
RELEVANCY SCORE 148.8

I got this problem,

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 4105

Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: 0000000000000001
BCP3: FFFFFA6005B67870
BCP4: 0000000000000000
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Im using:
windows vista home premium
nvidia GeForce 8500GT

Sorry for the lack of info im a noob at this

A:Need help with, "system service exception"

Welcome
You have given us 3 dump reports
2 indicated that its the Nvidia driver that must be updated
Nvlddmkm.sys file description NVIDIA Windows Kernel Mode Driver, Version 194.94 NVIDIA Windows Kernel Mode Driver, Version 194.94 NVIDIA Corporation

The third was code 124 which indicates hardware. Update yourNvida driver and see if the BSODS continue. If they do post the new report.
http://www.sevenforums.com/crash-loc...-what-try.html
:

Read other 2 answers
RELEVANCY SCORE 148.8

Hello all,

I have a new machine (self assembled), and after two weeks I now experience regular BSODs (System Service Exeption). Most of them have happened while using Cubase, a music software which is somewhat resource intesive. It's the only more resource intesive program I've used regularly so I'm not sure if the error is global or related to this particular program. It usually happens so that the functioning of the program becomes sluggish and then after a while the BSOD appears. Attached you'll find the crashdump just extracted from my system.

Juho

A:BSODs on a new machine, "System Service Exeption"

Hello zoomoo,

It is crashed by E-MU USB-Audio 1.0 Driver.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000046, fffff800030fcb80, fffff8800b5fccd0, 0}

*** WARNING: Unable to verify timestamp for emusba10.sys
*** ERROR: Module load completed but symbols could not be loaded for emusba10.sys
Probably caused by : emusba10.sys ( emusba10+18ace )

Followup: MachineOwner
---------
And the driver is old.

Code:
lmvm emusba10
start end module name
fffff880`0972a000 fffff880`0975cd80 emusba10 T (no symbols)
Loaded symbol image file: emusba10.sys
Image path: \SystemRoot\system32\DRIVERS\emusba10.sys
Image name: emusba10.sys
Timestamp: Thu Oct 07 11:10:21 2010 (4CAD5D45)
CheckSum: 00037610
ImageSize: 00032D80
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from E-MU Systems - Emulator X3, PCIe & USB Audio/MIDI Interfaces, Keyboards

Let us know the result.

Read other 1 answers
RELEVANCY SCORE 148

Hello all,
One day about a week ago, my computer crashed when I was doing nothing abnormal. I believe my room mate had just played WOW or something. all of a sudden, the computer shuts down and crashes every time it starts up again when programs are loading. At first, every time i would try to start up, antivirus and other programs would be launching and then a BSOD complaining about "bad pool header" would come up and it would reset after a certain amount of time.

At this point, my first course of action was to disable startup programs because i was able to boot into safe mode. So i used MSCONFIG and edited the start up files down to pretty much nothing, and it would still crash when i started into windows normally, even though safe mode worked.

Then my room mate went into safemode a litte later when i was away and downloaded an anti virus that apparently found a single virus in the system (even though i have been running nod32 for a very long time...) and also ran registry mechanic and repaired everything that it showed. This did not help, the same thing happened upon start up, even with everything disabled in the startup sequence.

After that, i decided to do a repair installation of XP and that worked fine, but after i started to start up normally from there, the same BSOD came up but it occurred earlier in the start up process... during the welcome screen loading. Windows still loads, but once the blue welcome screen comes up, it goes BSOD on me. However, ... Read more

A:BSOD "BAD POOL HEADER" on startup

Possible Causes:

NETGEAR Wireless Card: http://www.tweaksforgeeks.com/BAD_POOL_HEADER.html

Indexing Service: http://forums.tweaktown.com/showthread.php?t=18119

USB 2.0: http://www.techspot.com/vb/topic17282.html

More: http://www.google.com/search?q=bad_pool_he...:en-US:official
 

Read other 2 answers
RELEVANCY SCORE 148

Hello

Recently I've been having a lot of problems with BSOD's. It started about a month ago, but stopped when I used the Windows Recovery Tool. Now I am getting BSOD's again and using recovery doesn't seem to work. I did a clean install of Windows 7 x64 about 2 months ago.

I used the SF diagnostic tool and uploaded the files as an attachment.

Any help would be greatly appreciated. Just tell me if you need to know more about my system.

A:Frequent BSOD's, "bad pool header"

Please post this before we continue: Windows Genuine and Activation Issue Posting Instructions

Read other 5 answers
RELEVANCY SCORE 148

I am very thankful to have found this forum, thank you for dedicating time to do this.

I upgraded a few things:

Processor: FX6100
Mobo: MSI FX 880GMS-E41
RAM: 2 x 4GB Kingston DD3
HDD: Seagate 1TB 7200


Everything was working fine after upgrade, was able to boot properly. I decided to hook up my A4-Tech G800 Keyboard and Logitech wireless mouse. Then boom, it keeps hanging.

I can boot to Safemode, Safemode w/ Networking. I tried last known config, but when it gets to the desktop - it switches to the BSoD.

I am hoping with the attachment, someone can help me. More power to everyone.

A:BSOD on boot up "Bad Pool Header"

Welcome to SevenForums.

Did you reinstall windows after all these Hardware upgrades?

Uninstall AVG: AVG | Download tools and utilities

Install MSE: Download Windows 7 Upgrade Advisor from Official Microsoft Download Center






Quote:
Microsoft Security Essentials. Recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-
Microsoft Security Essentials - Free Antivirus for Windows Malwarebytes - FreeGood and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.



Perform a clean boot:Troubleshoot Application Conflicts by Performing a Clean Startup

Perform a System File Check:Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow
Full tutorial here:SFC /SCANNOW Command - System File Checker

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+





Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and contin... Read more

Read other 3 answers
RELEVANCY SCORE 147.2

I have a 7200rpm hard drive that shows up as 3 separate partitions on my MacBook Pro desktop. They are "System Reserved", "Untitled 1" and "Untitled". When looking at them in the Disk Utility program, they show up as "System
Reserved",  "disk2s1" and "disk2s3". I can't seem to find a way to wipe the drive and just have 1 partition. I don't need to save anything on it so it can all be deleted and consolidated. Not sure if this helps but the previous
owner told me that he had accidentally erased another partition that prevented the hard drive from being reconsolidated. It also may have been a Windows boot drive. Any help in restoring this hard drive would be appreciated. Thank you.

Read other answers
RELEVANCY SCORE 144.4

Hi,

I'm using Windows 10 th2-10511 x64 and when I install EMET 5.5 final the EMET system service is installed with the "delayed start" flag and the service and never starts after a reboot. The same thing happened with the beta version, I didn't notice
it until the final was released. This issue doesn't occurs with EMET 5.2.
I switched the service back to the normal Automatic (not delayed) start, and everything seems to be working again. I was wondering if anyone else experienced this issue?


Also, can someone enlighten me about this warning message "DEP/ASLR Policy settings are ineffective by default; see user's guide on how to enable them". It appears when I enable the DEP/ASLR EMET GPO. I couldn't find any reference to this warning
message in the user guide. DEP seems to be enabled, I have no idea how to check for ALSR other than Process hacker that shows ASLR as N/A.
Thanks

Read other answers
RELEVANCY SCORE 144.4

Fix for "Tuner Not Found" error and "Receiver service has stopped working" error listed in next post! -- Errors I'm receiving: "Tuner Not Found""Windows Media Center Receiver Service has stopped working.""Welcome - An upgrade is currently in progress."SpecsIntel P4 3GHz2GB RAMVisionTek Radeon X1300Hauppauge WinTV PVR-150 PCI IIWindows 7 32bit1. Tuner Not FoundOkay, the entire install went without a hitch. On opening Media Center I was told that I needed to setup Live TV. When I click the link I was given the dreaded "The TV signal cannot be configured because no tuner hardware was detected." If I run WinTV from Hauppauge I can view TV just fine.MCE ran fine this morning on Vista SP1 before the install.For the tuner issue I have done the following:-Reseated the card-Updated the drivers-Uninstalled the hardware and rescanned/installed the hardware and drivers-All Windows Updates-Uninstalled all references to Hauppauge on the machine and installed JUST the drivers, no Hauppauge software-Adjusted Log On preferences for Windows Media Center services to Local and manually started ehrecvr and ehsched along with cmd line manual starts-Downloaded new codecs from WinDVD and MSFT-Run the WMC Decoder Checkup Utility from MSFT and changed to Miscrosoft DTV-DVD Video Decoder (the utility recommended I change to this -- only one that is MCE compatible -- but once I did it told me that it is incompatible with sync on WMP10 and that... Read more

A:*RESOLVED* Media Center "Tuner Not Found" error, "Receiver service has stopped"

Okay, I resolved the first two issues, Tuner error and ehrecvr error.It had to do with multiple Admin user accounts on my computer. My computer was originally set up with a user Robert Baker with full privileges as administrator. I then also set up a MediaCenter account with full privilidges. For whatever reason the MediaCenter account has access to EVERY action on the computer except starting the ehrecvr service.1.  First set Media Center Service Launcher to log on at NT Authority    Services > Right-Click Windows Media Center Service Launcher > Properties > Log On tab > Log On As 'This account: ' > Type " NT AUTHORITY/LocalService " > Click Apply > General tab > Start service.2. I then set the Media Center Scheduler Service AND Media Center Receiver Service to log on as my other admin account. Same as above but with other account credentials and started the services.3. Reboot and no ehrecvr errors. Since this was a good sign I tried WMC and was able to set up my TV fine.I STILL, however, get the "Upgrade in progress" message when I open Media Center. Anyone know how to fix that? I've run setup again and can't get rid of it.

Read other 19 answers
RELEVANCY SCORE 144.4

My office just upgraded, and I can no longer use Windows XP. On this system, I was able to add a separate taskbar to facilitate quick access to commonly-browsed folder locations on our vast network, and another one expedited the launching of useful programs and lists. Each task on each taskbar was represented with a big custom icon to save eye strain. I had them installed in opposite vertical margins, and they were set on auto-hide to keep them out of the way when not being used. Just move your mouse pointer to the left or right margin, and BAM! Sorry for the cliche, but I really got used to the convenience of what I had set up, and I just don't think I can be as efficient without anything comparable.

Now there appears to be nothing comparable in the Windows 7 GUI, and it's making me sick with rage! I see only the option to put a "toolbar" on an existing "taskbar", and no option to create any additional taskbars! This cramps up your one-and-only taskbar, plus the tiny toolbar access buttons require way too much precision for anything that's supposed to be quick. When you've figured out how to bring up that ridiculous button, the list that it yields is small enough to cause painful eyestrain - nothing efficient, much less cool about this at all! I have seen customization options in other OS GUIs that may have resolved some of these issues, but I see none such in W7.

I have tried every google search string that I can think of, and found... Read more

A:Need to add "TASKBARS" (MSese for "Launchpads", "Docks" NOT "Toolbars"

Several possibilities here: Second taskbar in windows7? [Solved] - Windows 7 - Windows 7

Read other 1 answers
RELEVANCY SCORE 144

Hi,

When our website users click on an html attachment embedded on a web-page in IE9, the download manager will not display the "Open" option. It will only display "Save" and "Cancel" which our users don't like, having to save the
html document in a folder to open it. Whereas, when downloading attachments like pdf, word etc. all three options are displayed. 

Is there any setting to tweak , which will display all the 3 options for HTML attachments as well?

A:IE9 download manager will not display "Open" option (only "Save" and "Cancel" is displayed) for downloading HTML documents.

Hi,
As you know, the Open-Save-Cancel dialog box helps you prevent your computer from affecting by virus while downloading. 
So I suggest you test to reset all zones to a lower level temporarily and then please attempt to download this html attachment again.

However, since you can normally download the other documents, I suspect there is some restriction in the website which you are trying to view. I recommend you to contact the administrator of that website if possible.
could you please send me the link of the website from where you are trying to download the html attachment?
Thanks!


We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Read other 6 answers
RELEVANCY SCORE 144

I got my dell few days ago. Installed it with Samsung EVO 850 SSD 500 Gb and Kingston 8GB PC3L - 12800 SODIMM.The Windows 10 Home OEM home is installed on HDD 1TB so I decided to use Samsung Data Migration software to clone the data to SSD. However, the OS crashed and decided to install a fresh Windows 10 Enterprise to SSD and deleted the previous OS on HDD using diskpart.Now after Installing Windows 10 Ent OS files. Every after BIOS run, I got BSOD errors "MEMORY MANAGEMENT" + "Page Fault it non paged area" + "IRQL NOT LESS OR EQUAL" 

Read other answers
RELEVANCY SCORE 143.6

Hello,

First of all, thanks for this space and for the help.

I am experiencing two kinds of BSODs on my Win7 64. They are System Service Exception and Memory Management. Also I am getting complete freezes, of the kind where keyboard stop working, mouse too, everything, and you have to turn of CPU to restart.

These problems occur mostly when using Google Chrome (Youtube often) and playing games, such as Need Ford Speed Carbon, Sid Meiers Railroads, Grid, Left 4 Dead and others. Also when streaming music.

This machine of mine is brand new, has around 3 months of use, and has been assembled from several parts bought separatedly. The freezes and BSODs happen since the purchase and installation of Chrome and games.

I never installed other operating systems on this PC, Windows 7 64 bits is the first. It is a top class machine, with grade 7,2 on most items, except disks.

OS - Windows 7
? x64
? What was original installed OS on system? This one
? OEM version (came pre-installed on system) or full retail version? Full retail
? Age of system 3 months
? Age of OS installation 3 months also
? CPU - Athlon II X4 620
? Video Card - ATI Radeon HD 5750
? MotherBoard - Ecs Black Series A790gxm-Ad3 Am3 Ddr3 790GX /SB75
? Power Supply - brand & wattage - OCZ 500SXS, 500 watts
? Memory - 4GB DDR3 Corsair
? Disks - WDC WD5000AACS 500 GB and MAXTOR STM3160211AS 160 GB

The required ZIP files are attached. Thanks.

A:BSODs "SystemServiceException" and "MemoryManagement", also total freezes in Win7 64

Hi -

As you know, the files are in Portuguese, but the dumps are in the universal language of hexadecimal and I did find a few things which may help.

The bugchecks on the 8 mini kernel memory dump files -

(4) 0x3b (0xc0000005,,,) = system service exception, 0xc0000005 = memory access violation

(4) 0x1a (0x41790,,,) = memory management error

Both could be caused by rogue 3rd party drivers. Daemon Tool/ Alcohol/ other CD emulation software is undoubted involved and needs to be removed.

Update the first two drivers. Remove Daemon/ Alcohol and the burning app containing the pcouffin.sys driver -

Code:

netr7364.sys Thu Mar 12 23:13:08 2009 (49B9CF44) - RT73 USB Wireless LAN Card

RTKVHD64.sys Fri May 22 14:04:20 2009 (4A16E924) - Realtek HD audio

sptd.sys Sun Oct 11 16:55:14 2009 (4AD24632) - CD emulation

a0omnhk0.SYS Fri Aug 07 09:30:20 2009 (4A7C2C6C) - unknown; dynamically allocated by CD emulation software

pcouffin.sys Tue Dec 05 09:39:30 2006 (457584A2) - CD/ DVD burning driver
Your wifi is probably either Linksys or Ralink. Try both sites.
Linksys --> http://www.linksysbycisco.com/US/en/support
Ralink --> http://www.ralinktech.com/support.php

Realtek --> http://www.realtek.com.tw/DOWNLOADS/

Remove Daemon/Alcohol, update the wifi driver and the Realtek audio driver and see if BSODs persist.

Regards. . .

jcgriff2

.

BUGCHECK SUMMARY

Code:

Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
De... Read more

Read other 7 answers
RELEVANCY SCORE 143.2

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

Read other 14 answers
RELEVANCY SCORE 143.2

hi can u help me about instruction at "0x7c9100c8" referenced memory at "0x666f7260" it always appear every 4 hours and then my computer start counting for shutdown or restart. help please . . .

Read other answers
RELEVANCY SCORE 142.4

I double-click and get "search" instead of "open"--only when I click a disk, like Hard Drive C: or Floppy A: or CD F: and so on.

It didn't used to do this, so I must've inadvertently changed some setting somewhere, but darned if I can find it now.

Any ideas?
 

A:Solved: On the "my computer" list, I double-click on disks and get "search" instead of "open"

Read other 12 answers
RELEVANCY SCORE 142.4

It seems that no matter how I set this, after the next start-up it reverts to "15 minutes".  What registry key controls this?

Read other answers
RELEVANCY SCORE 142.4

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP




OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
Motherboard: Dell Inc., 0FF049, , .HWPLLB1.CN1296167S5169.
Antivirus: McAfee VirusScan, Updated: Yes, On-Demand Scanner: Disable
 

A:Solved: Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE

Read other 6 answers
RELEVANCY SCORE 140.8

Ok, so im new here so hey everybody..

to the point: my laptop is "stuttering"/lagging/skipping.
whatever you wanna call it its doing it.
my video/music/and cursor skip every second for a splt second it starts on start-up and dont stop til i turn my laptop off. it happens in a pattern its not random, ive done checked my drivers, spyware, and m RAM is good.. so can someone please help me? ***could it be because my battery wont hold a charger? so it has to be hooked up to the charger at ALL times or it dies Example: is the charger not got the "juice" to run the laptop by itself so it studders/skips..*** i dont know if this has anything to do with my problem but i ran "event viewer" and found this : The following boot-start or system-start driver(s) failed to load:
Cdrom
Imapi
redbook

PLEASE HELP
 

A:Whole computer "studders"/"skips"/"lags" .. have event viewer report (PLEASE HELP)

**(DONT KNOW IF THIS WILL HELP..)***

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Genuine Intel(R) CPU T2250 @ 1.73GHz, x86 Family 6 Model 14 Stepping 8
Processor Count: 2
RAM: 502 Mb
Graphics Card: Mobile Intel(R) 945GM Express Chipset Family, 224 Mb
Hard Drives: C: Total - 39723 MB, Free - 23484 MB; D: Total - 12684 MB, Free - 3633 MB;
 

Read other 2 answers
RELEVANCY SCORE 140.4

ok!!!!!!!!!! what is it and how do i fix it,,,, eyes crossed knees woobly help?????????????????????
 

A:[Solved] mplay32.exe,1"/play/close"%L"." and sndrec32.exe"%L"."

Read other 9 answers
RELEVANCY SCORE 139.2

Hi All,


I was just tweaking some services just then and notice that since i have installed SP3 v.5512 that the "Server" service has dissappeared from the services list. Has anyone else noted that?? or is my XP bugged

Looking forward to your replies,



Aaron

A:"Server" Service deleted from "Services.msc" with the release of SP3???

Quote:





Originally Posted by harrisball


Hi All,


I was just tweaking some services just then and notice that since i have installed SP3 v.5512 that the "Server" service has dissappeared from the services list. Has anyone else noted that?? or is my XP bugged

Looking forward to your replies,



Aaron




I have "SERVER", alive and well, even after installing SP3.
I really don't use it though and have it set to "Manual".

I just checked and I was able to 'Start' and 'Stop' Server.

Big Mystery!

Shadow

Read other 2 answers
RELEVANCY SCORE 139.2

We've been having a LOT of difficulties with Vista on our laptops recently.  The bootup process goes relatively fast until it gets to the "please wait" screen just before CTRL-ALT-DEL would normally appear.   The laptops can sit here for 10 minutes or 10 hours.  No rhyme or reason.  Nothing in the event log says anything about what it is trying to do.  Everything seems normal except this LONG wait at "Please Wait..."After some experimenting, I determined that if I disable the "Network Location Awareness" service, everything works fine.   Better than fine actually... everything is faster than ever.  Boot up takes 45 seconds from power on to the CTRL-ALT-DEL screen.My question is, why all of a sudden is this an issue?  Why would NLA cause huge hangups and delays on boot?  By disabling it, it seems to be fixed, if not better than before.  If I leave this disabled, is it going to break anything else?   Minded, we are a school district.  We have a local network.  No internet acess unless through a proxy.  Relatively simple network setup.   2008 servers.  1 domain controller.Ideas?

Read other answers
RELEVANCY SCORE 139.2

Hello - I've repeatedly tried and failed to install Service Pack 1. I have run the update readiness tool, and have run chkdsk and sfc. I've tried installing through Windows Update, as well as downloading the standalone installer from Microsoft.

The former results in an "unknown error"; the latter results in a window saying that "the specified service does not exist as an installed service" almost immediately after trying. A similar message has come up occasionally in recent days when trying to install a couple of other programs.

I'm currently out of ideas and would appreciate any help. Thanks!

Read other answers
RELEVANCY SCORE 139.2

Got my computer back today (Windows XP), and my background is now all green with a black box in the middle saying "Your System Is Infected...etc"

Also a red circle with a white X in the task bar

I can't open the task manager

Can Anyone Help???...

Downloaded HiJackThis

My log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 12:04:51 AM, on 12/29/2009
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Common Files\Apple\Mobile Device Support\bin\AppleMobileDeviceService.exe
C:\PROGRA~1\AVG\AVG8\avgwdsvc.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe
C:\WINDOWS\system32\dlcqcoms.exe
C:\PROGRA~1\AVG\AVG8\avgrsx.exe
C:\WINDOWS\system32\DVDRAMSV.exe
C:\PROGRA~1\AVG\AVG8\avgnsx.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\TOSHIBA\TOSHIBA Controls\TFncKy.exe
C:\WINDOWS\system32\TDispVol.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\i... Read more

Read other answers