Over 1 million tech questions and answers.

BSOD playing World Of Tanks, Technical information ***STOP: 0x0000001E

Q: BSOD playing World Of Tanks, Technical information ***STOP: 0x0000001E

Please help me. Thank you.

Preferred Solution: BSOD playing World Of Tanks, Technical information ***STOP: 0x0000001E

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD playing World Of Tanks, Technical information ***STOP: 0x0000001E

These crashes were caused by memory corruption (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.

RAM - Test with Memtest86+

2-Driver verifier

Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Special Pool", "Force Pending I/O Requests" and "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

Reboot into Windows (after the crash) and turn off Driver Verifier by going back in and selecting "Delete existing settings" on the first page, then locate and zip up the memory dump file and upload it with your next post.

If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.

If that doesn't work, post back and we'll have to see about fixing the registry entry off-line:

Delete these registry keys to stop Driver Verifier from loading (works in XP, Vista, Win7):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDrivers
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\VerifyDriverLevel

Using Driver Verifier to identify issues with Windows drivers for advanced users

Read other 8 answers

Hello new users so give me a little slack on my posts please

I was just playing world of tanks and this was the 2nd blue screen thats happened to me while playing along with the game will randomly crash in mid-game.

I am newer to pc gaming been on pc for about a year so im not that experienced and dont have a list i should really do in this situation. My computer is also a custom build if that helps at all.

A:BSOD playing World of Tanks, error 0x0000001e

Welcome to SevenForums.

Update the Atheros network adapter driver from: ATHEROS drivers for Microsoft Windows (Atheros?????)

First remove anything related to it from Control panel. Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to; Atheros. Delete remnants of its drivers/older drivers using Driver Fusion/Sweeper

4: kd> lmvm athrx
start end module name
fffff880`04222000 fffff880`043ad000 athrx T (no symbols)
Loaded symbol image file: athrx.sys
Image path: \SystemRoot\system32\DRIVERS\athrx.sys
Image name: athrx.sys
Timestamp: Thu Apr 22 00:13:20 2010 (4BCF4040)
CheckSum: 0019073F
ImageSize: 0018B000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Replace Avast! with Microsoft Security Essentials (at least to test).avast! Uninstall Utility | Download aswClear for avast! Removal
Microsoft Security Essentials - Microsoft Windows
Free up the start-up, nothing except the antivirus is usually needed.Startup Programs - Change
Troubleshoot Application Conflicts by Performing a Clean Startup
Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:SFC /SCANNOW Command - System File Checker
Run Disk Check on your hard disk for file system e... Read more

Read other 9 answers


I'd like to ask for your help with BSOD on computer HP620. I usually observe the problems when returning back from playing World of Tanks to the desktop directly or when trying to launch the applications like Internet Explorer.

I collected all the details via DM Log manager and attached the file to this thread.

Thank you very much for your help in advance.

Best regards,
Rudolf Wolf

A:BSOD (0x0000001e) after returning back to desktop from World of Tanks

You have issues with your USB hub. Probably a driver causing issues. Please enable Driver Verifier as it will help us identify the driver responsible (If it is a driver at fault).
Follow these instructions.

Driver Verifier - Enable and Disable

Read other 1 answers

Hi everyone

I upgraded my video card last year before Christmas with a GeForce GTX 650, in february i also changed my old hdd and added a 1TB WD Blue.

Problems started like two weeks before Easter in which i received BSOD's almost every day and i didn't knew what was the problem. On 2nd day of Easter my old 500 watt Raidmax PSU "died" while i was playing World of Warcraft, so then i thought the PSU was the problem that made BSOD's appear because it was like 4 years old and the new video card was in need of more power. This month on 4th of july i bought a Corsair CX 600 watt PSU, the computer worked normally until two days ago on 29th, in the morning i pushed the power button but only the fans and the power led were on, nothing on monitor, after on/off the pc a few times and on/off the PSU once it finally started. Today same scenario with power up, then i decied to play some World of Tanks, after first fight...like 5-10mins of playing i got BSOD and restard, tryed again and same think happened, also the computer blocked i think twice and i had to reset it and once i saw in bios at cpu temperature all kind of strange numbers.

This is what i saw in Who Crashed:

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.
On Wed 7/31/2013 7:59:03 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\073113-16484-01.dmp
This was probably caused by the following module: unknown_module_00000000`17011c01.sys (Unloaded_Unknown_M... Read more

A:BSOD While playing World of Tanks

You appear to have a Dell OEM_SLP key on a retail ASRock motherboard, your installation is clearly counterfeit, please install and format with a genuine key.

Read other 3 answers

Hi I need some help , my desktop is crashing randomly when playing games on it
I attached the minidump file as instucted and also I tried using bluescreen viewer but I dont know how to fix it.
Any help would be highly appreciated . thanks in Advance!

A:BSOD when playing World of tanks

Hi there,
Welcome to Seven Forums!

It could possibly be your graphics card driver. Have you tried updating this?
Also if anything is overclocked please make it default just for testing purposes.

Let us know how you get on .

Read other 2 answers

BSOD playing world of tanks

A:BSOD playing world of tanks

Windows crashed too late for us to be able to determine cause here. Your best option at the moment is to turn on Driver Verifier and provide us any new crashdumps from crashes that may occur when DV is on.

Read other 1 answers

i had a BSOD while playing WoT, well, i didnt see a BSOD cause my system freezed...i dont see a bluescreen ever, the only thing that happens is that my machine freezes, only with bluescreenviewer i see that it has been a BSOD, or not.

so here are some infos:
- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? Windows 7 Professional x64
- an OEM or full retail version? OEM
- What is the age of system (hardware)? about 2 years
- What is the age of OS installation (have you re-installed the OS?) about half a year or so, dont know exactly

hope you may find out what is happening to my machine


A:BSOD playing World of Tanks

Hello, mirei.

Welcome to Windows Seven Forums !

I did small review of your MiniDump files and problem is making your NVidia Graphic Card driver.

There is a lot of new versions which can fix that BSOD problem.

What you can do :
1. Update your currently Graphic Card drivers.
2. Check your game compatibility with your Graphic Card compatibility.

I will start with only this.
Try this and If you have problem again, we will do some tests.


Read other 5 answers

So far I have had a total of 5 BSODs since I formatted. I was getting them before too, just to clarify. The BCCodes are 0x00000001, 0x0000007f, 0x000000fc, 0x00000001 and 0x00000050. They were caused by two things, ntoskrnl.exe and nvlddmkm.sys. I have only gotten them when World of Tanks is open, I don't have to be playing it, as long as it is open the game either crashes randomly or I get blue screen'd. I have changed Nvidia drivers about 5 times now, ranging from brand new ones to ones from the beginning of the year. I have reset BIOS to default settings which was something suggested, that did nothing. I have also cleaned my computer which also didn't help. There may have been a few other things I tried that I cannot remember.

System Specs:

CPU - Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz


BIOS - BIOS Date: 05/22/12 14:14:22 Ver: 04.04

Total Memory - 16.00 GB/Usable - 15.95 GB

HDD - (1) Hitachi HDT721064SLA360 (2) WDC WD1002FAEX-00Z3A0

Graphics Card - NVIDIA GeForce GTX 560 Ti

OS - Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1

A:BSOD Playing World of Tanks.

Where did you get your copy of windows 7 from?

OS Name: Microsoft Windows 7 Ultimate
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Anthony
Registered Organization:
Product ID: 00426-OEM-8992662-00497
Original Install Date: 7/31/2013, 8:15:21 AM
System Boot Time: 8/6/2013, 8:40:58 PM
System Manufacturer: System manufacturer
System Model: System Product Name

Read other 7 answers

I'm having issues with different BSODs but seems to only happen when playing World Of Tanks and some web browsing. Graphics driver has been updated and that's about it. Any help would be greatly appreciated.

A:BSOD When playing World Of Tanks


Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+100 )

Lets try a RAM - Test with Memtest86+

Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::ReferenceAllocationForPreparation+22 )

You can update this via Windows Update, or just uninstall directX and download the latest version here: Download DirectX End-User Runtime Web Installer from Official Microsoft Download Center

Post back with updates.


Read other 1 answers

I think it can be my PSU, because i hear the coil always. While moving my mouse its buzzing... And before BSOD it start BUZZ louder and then BOOM BSOD. Check this out, maybe you can tell me something. Thank you

Read other answers

I've got new rig, and during playing World of Tanks I always have this BSOD. I already did everything I've read here: updated graphic drivers, updated DirectX, rised up voltage of my DRAM. Computer was at the service, everything was checked, nothing was found. I've checked my computer by memtest prime95 3dmark and occt, no problems here. Only have BSODs when playing.
My rig:
Gigabyte GA-970A-D3
SilentiumPC Fortis HE1225
AMD PHENOM II X4 955 QuadCore 3.2GHz Black Edition (HDZ955FBGMBOX) 1
Kingston KHX1600C9D3K2/8G
XFX Radeon HD6790 1 GB (HD-679X-ZRFC)
Seagate Barracuda 3.5'', 500GB, SATA III, 7200RPM, 16MB, NCQ (ST500DM002)
OCZ StealthXStream 2 600W 80+ SLI PSU 120mm (OCZ600SXS2-EU)

Latest BSODs in attachment
Please help.

A:BSOD dxgmms1.sys playing World of Tanks

Quote: Originally Posted by Cinek87

I've got new rig, and during playing World of Tanks I always have this BSOD. I already did everything I've read here: updated graphic drivers, updated DirectX, rised up voltage of my DRAM. Computer was at the service, everything was checked, nothing was found. I've checked my computer by memtest prime95 3dmark and occt, no problems here. Only have BSODs when playing.
My rig:
Gigabyte GA-970A-D3
SilentiumPC Fortis HE1225
AMD PHENOM II X4 955 QuadCore 3.2GHz Black Edition (HDZ955FBGMBOX) 1
Kingston KHX1600C9D3K2/8G
XFX Radeon HD6790 1 GB (HD-679X-ZRFC)
Seagate Barracuda 3.5'', 500GB, SATA III, 7200RPM, 16MB, NCQ (ST500DM002)
OCZ StealthXStream 2 600W 80+ SLI PSU 120mm (OCZ600SXS2-EU)

Latest BSODs in attachment
Please help.

How many memtest passes?

I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier&quo... Read more

Read other 9 answers

Hi there, so my pc has give me a headache since yesterday. And i think i need help now.

At first i got error "bottmgr is missing"
After checking all the cables and setting my boot order in bios that error is gone now.

But another problem occur, when i play a game, specifically world of tanks (i haven't try another game) it will give me BSOD after a while.

Thanks in advance,

A:BSOD When Playing Game (World Of Tanks)

You are running an ASUS Product ID (PID) on a MSI board.
This makes your installation counterfeit.
Troubleshooting a counterfeit installation is useless as it is not known what has been modified to your system.
A counterfeit installation contains heavily modified code which causes the system to behave in unexpected ways.
For this reason, analyzing counterfeit systems is unreliable and most analysts won't try it.

OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Dennic
Registered Organization:
Product ID: 00426-OEM-8992662-00173
Original Install Date: 8/29/2015, 8:36:18 PM
System Boot Time: 8/16/2016, 10:46:35 PM
System Manufacturer: MSI
I recommend to install a genuine copy of Windows.
If, after you have installed a genuine copy of Windows, you still get BSOD's we'll be happy to assist you.

Read other 1 answers

windows 7 home premium 64, original OEM
purchased / OS installed feb 2011

Only happens when playing world of tanks, not while doing anything else. 6 crashes in 10 weeks so not that often but still mildly annoying.

Any help would be appreciated.

A:occasional BSOD when playing world of tanks

Before we can investigate the underlying cause please update this driver


The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).

Read other 7 answers

After every match of world of tanks, I get the aforementioned BSOD. This just started today, I was playing just fine yesterday. It only happens at the end, when I am sent back to the garage. I have not tried any other games.

From what the microsoft bug check tells me, it's a problem with the CPU (CLOCK_WATCHDOG_TIMEOUT).

My full PC Specs are :
i5 3570k @ 3.4ghz (stock) with the stock cooler
MSI HD 7970 @ stock
8 GB Corsair Vengeance
ASUS P8 Z77-V LE Plus
CoolerMaster GX650W
I've uploaded a picture of the BSOD, the .dmp file from the most recent BSOD in the .rar, and the DM Log collector file in the .zip.

Sorry if I forgot any information, can you guys please help me?

A:BSOD playing World of Tanks, error 0x00000101

Hi Soldi, Welcome to Sevenforums!

First off lets get rid of the following:
Daemon Tools
AVG PC Tuneup
NCH Software Suite

Uninstall them with Revo Uninstaller (While uninstalling a program, select the "Advanced" option and Select all and delete any file found)
Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

If you are overclocking stop now until we can achieve a stable system.

Your BIOS needs to be updated
ASUSTeK Computer Inc. -Support- Drivers and Download P8Z77-V LE PLUS

At least one BSOD has had some sort of hangup with your graphics driver. You have the latest driver so lets try to uninstall it and reinstall just to see if that helps.

*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Also, check with Razer Synapse, it was the process running when the BSOD occurred.

I would remove this from your PC as I don't believe its necessary. Use Revo as suggested above.

Download the latest driver
MSI USA - Computer, Laptop, Notebook, Desktop, Mainboard, Graphics and more

Uninstall the current graphics driver

Clean leftover driver files
Drivers - Clean Left over Files after Uninstalling

Reboot Windows, Upon reboot windows will load the default graphics driver.

Navigate to where you saved the graphics driver you just downloaded and run it.

Reboot again ... Read more

Read other 3 answers

Here is what i get It does not matter what im doing i get This BSOD every once in a while i also have another problem where it just randomly turns off and wont turn back on again till i leave it unplugged for 12 hours for it to turn back on

BSOD Error code
The computer has rebooted from a bugcheck. The bugcheck was:
0x1000008e (0xc0000005, 0xbd0a9fa5, 0x9b0dc91c, 0x00000000
Can somebody help me?

A:BSOD randomly at idle Playing World Of Tanks


Is there any particular reason for using windows xp?

The dump relates to your graphics card and its drivers. The issue of turning off and wont turn back on again is a hardware issue, probably a overheated/dying graphic card.

Does your motherboard have a onboard VGA slot? Connect there and see if this issue persists. What's the age of all the hardware?

Try installing latest video card drivers if possible:
Download NVIDIA Forceware 306.23 WHQL XP - FileHippo.com for 32 bit windows xp
Download NVIDIA Forceware 306.23 WHQL XP 64 - FileHippo.com for 64 bit windows xp

Unable to load image nv4_disp.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nv4_disp.dll
*** ERROR: Module load completed but symbols could not be loaded for nv4_disp.dll
* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debugging information.

BugCheck 1000008E, {c0000005, bd0a9fa5, 9b0dc91c, 0}

Probably caused by : nv4_disp.dll ( nv4_disp+97fa5 )

Followup: MachineOwner

2: kd> !analyze -v
*****************************************************************... Read more

Read other 7 answers

Hey guys, I've recently been encountering BSOD while playing graphically intensive games such as World of Tanks in 4k resolution. I thought it might be a temperature issue, so I manually turned up my GPU fan speed to 90% while playing, and my core temp. remained ~50?C. That didnt seem to fix the issue.

My last crash gave me the ol' Stop: 0x00000124

Here is my zip file containing the results of a DM Log Collector.

Edit: My system specs are:
CPU: i7-4790K @ 4.00GHz
RAM: 16Gb G.Skill Trident X @ 2400Mhz
OS: Win7
PSU: EVGA 1000P2

A:BSOD playing games in 4k resolution such as World of Tanks 0x00000124

It seems to be overclocked.

CPUID: "Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz"
MaxSpeed: 4000
CurrentSpeed: 4080
And overclocking is one of the most frequent reasons of a stop 0x124 (though not the only reason).

As you are experiencing BSODs, As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings. Then see if it still causing the same BSOD or not. If the BSOD continues to occur, let us know. We will take further attempts to troubleshoot the issue.

BugCheck 124, {0, fffffa800fa41028, be000000, 800400}

Probably caused by : GenuineIntel

Followup: MachineOwner

2: kd> !analyze -v
* *
* Bugcheck Analysis *
* *

A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80... Read more

Read other 4 answers

Long story short built I this computer for crypto-currency mining but couldn't get it stable, now I am trying to play some games on it but it still BSODs. I don't know much about bsod or troubleshooting but from what i remember it always showed up as the same error on the bsod (0ax000001 not sure how many zeros there were after the "x").

A:BSOD playing world of tanks w/ browser running in background

There are some important files missing from your logs, please run the DM Log Collector again and upload the new logs.

Read other 9 answers


Please help. am i missing a file or driver?

A:bsod when playing high graphic game. World of tanks.

Quote: Originally Posted by Peter725


Please help. am i missing a file or driver?

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine. If you have uploaded DMPs before please only the new ones.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if ... Read more

Read other 1 answers

Hi been getting frequent random BSODs whilst playing world of tanks. Each time the problems seems to be caused by atikmpag.sys. I have tried uninstalling and installing the most recent drivers but got another BSOD as soon as I tried to play the game again.

A:BSOD whilst playing World of Tanks caused by atikmpag.sys

All of the dumps are 0x116 VIDEO_TDR_ERROR (Timeout Detection Recovery) which can be down to the driver, heat, power to the card, the PCI slot it's in or a bad card among other things. Your driver isn't the most recent from what I can see so we'll try that first.

Download the latest driver from here and save it to your desktop. Download DDU and follow Display Driver Uninstaller: How to use to remove all traces of your current driver. Reboot and install the downloaded driver.
BugCheck 116, {fffffa800b9ec060, fffff88004308848, 0, 2}

Unable to load image \SystemRoot\system32\DRIVERS\atikmpag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+b848 )

Followup: MachineOwner

6: kd> lmvm atikmpag
start end module name
fffff880`042fd000 fffff880`04393000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Fri Nov 21 02:08:54 2014 (546E9EB6)
CheckSum: 00093077
ImageSize: 00096000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Try that and report back, upload new logs if you receive any more BSODs.

Read other 5 answers

Hello everyone. I'm new here..I've got a problem with my laptop, its a Toshiba Satellite C660-1CH PSC1JE. It has CPU i3, 3 GB ram, 500 GB HDD. When I quit the World of Tanks game or runing other programs like Winamp, Bs player, GOm player, it crashes. The major problem of this BSOD is the cdd.dll file. What can I do ? Please help me

A:BSOD playing World Of Tanks, runing programs like BSplayer, Winamp,etc

Hello criserian.

► It is avast.

* *
* Bugcheck Analysis *
* *

Use !analyze -v to get detailed debugging information.

BugCheck 50, {ffb885dc, 0, 9949b768, 0}

*** WARNING: Unable to verify timestamp for aswSnx.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS

Could not read faulting driver name
Probably caused by : cdd.dll ( cdd!CddBitmapHw::Release+1e )

Followup: MachineOwner
Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download and install those, and then run full system scans with both of them, one by one.

► Also, install service pack 1 and all the other updates.

Windows 7 Kernel Version 7600 MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16481.x86fre.win7_gdr.091207-1941
► Uninstall Daemon Tools.

Free up the startup.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
S... Read more

Read other 1 answers

I zipped up the dump files I found in this Minidump folder, I'm assuming it would be of some use.

Some other info:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 040413-13104-01.
I was just playing and screen blue background with white text.

I really appreciate the help, I've had this issue for awhile, but never knew where I could get help. Luckily I finally decided to google and found this awesome site that has helped many others who experienced BOSD.

A:BSOD Playing World of Warcraft, said 0x0000001e


There is a lot of info missing from your logs.

And here are the instructions for posting:


Ensure you click the "GRAB ALL" button and then wait for each window to appear in turn and then click OK



Read other 5 answers

i always crash whenever i play need for speed world. it would start for a few minutes or a few seconds. im not sure if its driver related, overheating GPU, or worst, a dead GPU. i attached the minidumps here. hopefully someone can help me out. thanks!

A:BSOD playing Need For Speed World, error 0x0000001e


Both your dumps point toward hardware BUT

Usual causes: Device driver, hardware, System service, compatibility, Remote control programs, memory, BIOS

Usual causes: Device driver, memory, kernel

Lets enable driver verifier to rule out buggy drivers
Driver Verifier - Enable and Disable

Driver Verifier runs in the background, "testing" drivers for bugs. If it finds one, a Blue Screen of Death (BSOD) will result; the corresponding dump file will hopefully show the faulty driver.

Quote: Originally Posted by Capt.Jack Sparrow

Driver Verifier monitors kernel-mode drivers and graphics drivers to detect illegal function calls or actions that might corrupt the system. It can subject the drivers to a variety of stresses and tests to find improper behavior.

Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Read other 1 answers

Playing world of tanks I had a BSOD that said "Bad Pool Header" then of course a bunch of stuff that means nothing to me... I have downloaded the SF Diag tool and will attack the zip with my dumps/diag info here...

As a Side note... the BSOD does the memory dump then supposedly "restarts" the computer but mine just sits there on a black screen until I manually hold the power button down to turn it off then turn it back on....

A:BSOD Playing World of Tanks "Bad Pool Header"

BugCheck 19, {3, d2eaf600, ac212f78, d2eaf600}

*** WARNING: Unable to verify timestamp for avgidsshimx.sys
*** ERROR: Module load completed but symbols could not be loaded for avgidsshimx.sys
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+312 )

Usual causes: Device driver
avgidsshimx.sys seems to be a driver which is causing the crash, and linked to AVG, therefore I suggest uninstalling AVG with the offical installer (see link below)

Uninstall AVG:

Start Menu\Programs\AVG
Download tools and utilities | AVG UK
Uninstall Spybot - Search & Destroy:

Start Menu\Programs\Spybot - Search & Destroy
The later editions of AVG have been known to cause some stability issues with Windows 7, furthermore I would suggest uninstalling Spybot, as AVG and Spybot are both real-time protection programs and therefore are clashing with each other and producing crashes.

You can run full scans with MSE and Malwarebytes:Microsoft Security Essentials - Microsoft Windows
Malwarebytes : Free anti-malware download
Remember to install the free version of Malwarebytes not the free trail; untick the free trail box during installation. Microsoft Security Essentails has proven to much more stable and less problematic within Windows 7, than other AV suites available to use. Remember to update the security definitions for both MSE and Malwarebytes before scanning your system.

Uninstall Free Window Registry Repair:

Start Menu\P... Read more

Read other 9 answers

So I just played world of tanks.
I load in and the game starts, i move around for about for a minute as usual, suddenly sound to my USB Headphones is cut and my monitor says "No connection found, entering sleep mode". THen i tought what the hell and restarted my monitor (didn't notice the absense of sound yet) Still the same. I waited for a little bit, then looked at the lights on my PC, none of them were showing a sign of life. (Power & HDD Activity lights) altrought my fans were still spinning. Then I restarted my PC by holding the power button down and booted into windows right away, no error logs or anything that i can see. No BSOD. Just like a death.
I suspect motherboard/PSU error, what do you think?
450W non 80+ PSU
Manufacturer ECS
Model A740GM-M
AMD Athlon II X2 250 (dual core AM2+)
RAM: x2 DDR2 2GB 800Mhz
Philips 226VL
GPU :NVIDIA GeForce GT 440
Audio: USB Logitech headset
OS: Windows 7 SP1 with the most up to date drivers

A:Computer..Crash(kind of) while playing world of tanks. (troubleshoot)

Yeah, that sounds like PSU failing... I would swap in a better quality PSU, ASAP.
I guess I'd a little bit higher on the watts too, 550/600w one.

Visit jonnyguru.com for some good info and reviews of PSUs so you have a reasonable idea what to buy.

If it was motherboard it wouldn't have rebooted .

My last major failure: My last motherboard broke in the middle of playing a stressful MMO, on release day of Rift, and I was playing a different MMO during Rift update, LOL! [my bad luck]

Initially thought it was PSU, but it was the motherboard, was 7 hrs later when I was finally back up running, I had bought all the parts at a local Fry's, but was 2 round trips to get the right diagnosis/parts complete.
Fond memories...

Read other 2 answers

After an update I'm unable to access the above mentioned games.  They load without problems and then the window minimizes.  When you put the pointer above the taskbar pin it shows the window but when you move off to get to the full window it
disappears.  What do I need to do to get these games back and running correctly?<style></style>

Read other answers

Hey everyone!

For the past few weeks that I've been playing Star Wars: The Old Republic, I've been getting BSOD's every time I play. I've noticed that it only happens when I'm playing SWToR. I tried to fix the error by reformatting my computer, which didn't help. I've run memtests, switching the RAM cards around, etc., again to no avail. Any information you guys could give me would be great, I'm really getting to my wits end here.

Thank you!

A:BSOD while playing Star Wars ToR, stop error code 0x0000001E

There seems to be a problem with your Windows activation. Please post this report: Activation Issue Posting Instructions

Read other 7 answers

Hello, long time reader, first time poster here.

I have a nicely working midi tower system which handles most of my home computing: games, video, music, development, emails, etc. It performs fine with most games including Shogun Total War, Blood Bowl. It rarely crashes.

Recently I started playing World of Tanks version 0.6.7 and the system dies via BSOD. Some nights I have none. Some nights I cannot escape them.

I've attached the DMP, system info, and perfmon files. Please let me know if I can perform any other diags. I appreciate all the help and information here!

Thanks, Dan
System Info:
Win 7 Pro x64
Intel x58 mobo with i7 920
8 GB memory
EVGA GeForce GTX 570,
Realtek HD Audio

A:Intermittent BSOD with World of Tanks

1st minidump:
Usually caused by driver.

The First minidump indicates csrss.exe, possible malware hiding place.

Scan using malwarebytes:
Malwarebytes Anti-Malware - Free software downloads and software reviews - CNET Download.com

Also ensure you are using Microsoft Security Essentials. If not, then uninstall other antivirus and install MSE:
Microsoft Security Essentials

Last minidump:
Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS

Your last minidump is indicating "dxgmms1.sys", which is a Direct X file. you should update your video drivers from the Nvidia site.

Also, make sure to remove old drivers using driver sweeper. Follow all instructions, then install the most recent drivers, nonbeta. I usually download(dont install) the drivers first so they are already there to just install after everything is cleaned by sweeper.
Drivers - Clean Left over Files after Uninstalling

You should also enable driver verifier to get some more minidump files to analyze and run memtest86+, as bad ram causes a lot of problems.

Follow all instructions carefully, and make sure you run memtest for atleast 7 full passes.
Using Driver Verifier to identify issues with Drivers
RAM - Test with Memtest86+

Please post back with any results or questions
Good Luck,


Read other 1 answers

I've been having an issue with blue screens my computer. It has occurred during action- and sound-heavy moments in World of Tanks and Skyrim; there's a freeze, a single tone issues from the speakers, and then the screen displays lines of color before finally bringing up the blue screen.

I had an issue with this previously, contacted my manufacturer, and sent in the computer for a full check diagnostic. They ultimately determined it was an issue with the hard drive and sent me back the computer with that replaced. However, now the blue screens have happened again.

I guess I probably should've posted here from the start.

A:BSOD on World of Tanks, Skyrim; error 0x00000050, dxgmms1.sys

Welcome to SevenForums.

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
RAM - Test with Memtest86+

The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the ... Read more

Read other 6 answers

I am downloading World of Tanks, but I keep getting blue screen at about 60 MB.
It says it is caused by RTL8192cu.sys.
I have tried updating the driver with this link:Realtek

Attached is zip file from sfdumputility

A:BSOD downloading World of Tanks, Driver-irql-not-less-or-equal

You have done it right as per what you have described. As the zip does not contain a crash dump, we cannot check it.

If the BSODs continue even after updating the driver, let us know.

Read other 1 answers

Good morning all.

I recently reinstalled World of Tanks on a new laptop i bought, and have noticed one particularly annoying fault in this game.

When the countdown to match start is underway, i can see all the tanks no problem. However, once the match begins and the tanks begin moving, they dissapear! I can still see the shadows underneath the tanks, and when i mouse over where they should be, their outline appears. But for the rest its like invisible tanks.

Does anybody know what may be causing this graphics fault?

The specs for my system are:

windows 7 64bit premium
8gb ram @ 1333mhtz 2x4gb sticks
core i7 @ 2.00ghtz turboboost to 2.90ghtz
Nvidea GT555m with 3gb vRAM
500gb harddrive @ 7200rpm

When i run the game, i run it at 1600x900, and all settings to max. Framerate is good, so i don't think i'm hitting a performance cap.

As far as i know i have directx 11 installed.

I would love to know how to fix this and i greatly appreciate any and all help!

Its my favourite game, please help!

A:World of Tanks, tanks dissapearing.

Hi, try disabling triple buffering under graphics settings.
That works for many people

Good luck with the game

Read other 1 answers

I started playing "World of Tanks" a few months ago and I'm hooked! It's just the right combination of simulation, RPG and FPS for me. No blood and gore, just fun! My son likes it, too, although the gameplay is slower than he's used to. I'm a beta tester for "World of Warplanes", but the controls are a little too difficult for me to master, not that I've mastered World of Tanks... I saw the trailer for "World of Warships" and I'm really looking forward to that one as I spent 9 years in the US Navy. Anyone else here play these games?

A:Anyone else here playing "World of Tanks"?

the first time I was exposed to this game was for the xbox presentation. looks cool but know nothing about it. how does the whole thing work? it's a F2P game, right?

Read other 2 answers

My neighbor got me started on World of Tanks a few months ago and I'm up to 1400 battles so far. It's very addicting and is just the right combination of FPS (no blood or gore), role playing and simulation. The game pace is perfect for me and I'm really enjoying it.

You don't have to have the latest hardware to run the game, but I thought the GTX-650 was fine until I got my new GTX-660 and the difference is simply amazing!

Anyone else here play??

A:Anyone else here playing "World of Tanks"?

Nobody is playing this game??? I must be the only one addicted to it...

Read other 11 answers

Hello, firstly I am sorry if this ends up being a similar situation to something solved previously.

Yesterday, I turned on my computer to check emails and it blue screened on me. After it auto-restarted, I attempted to resume, and it did the same thing. I decided to check the dump file since I had downloaded Blue Screen View after a previous blue screen event, and it did it again. After (I believe) five blue screens after running windows seemingly successfully, it wouldn't even finish loading windows.

Running windows normally - blue screen
Running startup repair - blue screen
Trying to run the windows installer from my setup disk - blue screen

I can get it to run in safe mode, and checking the dumps shows that the Windows NT Kernal is throwing up a red flag (ntoskrnl.exe).

I have run MemTest x86 and after 4 passes, it returns 0 errors.
Attempting to run a repairing check disk forces me to schedule it to run at startup, and the computer blue screens before it can actually run.

I am at a loss as to what to do to correct the issue.

A:Always BSOD on startup, various technical information messages

New development:

I Removed the battery and left the computer unplugged overnight. When I replaced these this morning, I started up normally and seems to be stable so far. However, I don't know if this is permanent or just a random fluke. If someone could review the information the SF Diagnostic Tool gathered and provide some feedback on this, I'd appreciate it.

Read other 2 answers

i have downloaded world of tanks and i click to battle and when it almost lets me enter the battle it says its not responding please help i have been trying to figure it out for 3 hours now

A:world of tanks

what are you computer specs?
here are the world of tanks system requirements review them i think your graphic card might not be good enough
or something along those lines. make sure all of your drivers and cards are up to date also.
and if it still dosent work i would recommend reinstalling it.

Minimum system requirements:

Operation system: Windows XP/Vista/7/8
CPU: 2.2GHz
RAM: 1.5 GB for Windows XP, 2 GB for Windows Vista/7/8
GPU: GeForce 6800GT with 256 MB of video memory / ATI X800 with 256 MB of video memory, DirectX 9.0c
Audio adapter: compatible with DirectX9.0c
Space available on HDD: 9 GB
Internet connection speed: 256 Kbps
Recommended system requirements:

Operation system: Windows XP/Vista/7/8 64-bit
CPU: Intel Core 2 Duo 2.5 GHz/ AMD AthlonTM 64 X2 5600+ 2.8 GHz (or better)
RAM: 4 GB (or more)
GPU: GeForce 260/ ATI HD4870 (or better) with1Gb(or more) of video memory, DirectX 9.0c
Audio adapter: compatible with DirectX9.0c
Space available on HDD: 9 GB
Internet connection speed: 1024 Kbps (or faster)

Read other 1 answers

Is there a way to invert the y axis in this game? I cant find it.

Read other answers

Well the first unexpected error to occur was that a RunDLL message came up every time I logged on showing 'Error loading C:\Users\(username)\AppData\Roaming\uivethmx.dll' Been happening for about 3 weeks now.
About a week ago, the mouse was pulled out of the computer (with a bit of force) and then once I put it back in, the computer would freeze as soon as the acer screen appeared so one by one I took all the plugs etc. of the back of the computer and found that without the mouse in my computer carried on working fine like normal, and also (using the keyboard) I checked the mouse via control panel and there was no software/hardware? (I'm not good with the technicalities of a computer at all) and so basically there was no mouse hardware installed or something like that, but I went and bought a mouse and everything was fine, however I still kept getting the RunDll messages.

Then a like a 3 days after that was the first time I saw the BSOD and after restarting it never came again until two days ago and then it became frequent; every time I logged on after about 10 minutes or so. So I began to google this and I found that it was the BSOD that I was dealing with and I found out how to stop the the comp from restarting so that I could read the BSOD. Done that. Then I read the technical information shown and it keeps changing ***STOP : 0x0000008E (0xC0000005 (THIS BIT CHANGES 0x81EC5053, 0x813FF9CC) 0x00000000)

This is what's written below that:

Collectin... Read more

A:BSOD shows different technical information each time every 10 minutes after log on

Read other 16 answers

I have recently experienced problems with lag spikes during playing this MMO game. The game has indicator showing FPS and ping, which are most of the time acceptable, FPS being about 80, and ping about 40, which enables smooth playing. But every minute or so, my ping goes to 999 for a sec or two and then is back on normal, but during those 2 secs i am completely helpless ingame. FPS never has such issues.
I tried cleaning all background processes like Skype, Dropbox, but couldn't find any problem, i used CCleaner program. I have to add that i had played this game before on same computer and haven't had these lag spikes. Could it be some spyware is occupying bandwith?

P.S. maybe it is relevant to add, i have second comp in house and although he has a little lower performance, that one never displays such lag spike.

Read other answers

TL;DR because forums ate the previous thread I was trying to post

>Play WoT for 2.5 years on HP laptop, Win 7
>Breaks down, get new Acer laptop, Win 8 (major hardware upgrade, yay)
>Additional admin account set up for me, brother uses the original "owner" admin account
>My account doesn't have permission to run WoT (how does that even work, an admin is denied access and has to give permission to himself)
>Give permission to run WoT on my account through right click + properties (took a while to find that)
>Gives me error 0xc0000022 when trying to start through launcher
>Can still play on the owner account, but that is rather inconvenient

Help please?

A:World of Tanks error 0xc000022

When he installed , did he get the option to 'install for all users' ?
option might be to uninstall on his account then re-install and see if that option appears.

Read other 21 answers

So my dad has been playing WOT for a few years now and recently I helped him build a new computer so we could hand-me-down his older one. I built him a computer with: AMD Athlon II 270 3.4ghz CPU, Biostar A780L3G AM3 MB, 2x4GB Kingston Hyper-X 1600 Ram, Antec VP-450 PSU, Sapphire Radeon HD4850. He has been playing just fine on this setup since November 2013 until the last 2 months. WOT shuts down the computer with no BSOD or minidump/log yet consistently while performing the same action (clicking the battle button or spectating while destroyed) never anything else. This can happen the very first time the computer is turned on or after 10 hours of gameplay later, and even some days it doesn't even happen at all. I have ran Furmark and Prime 95 at the same time to see if the PSU is failing and even after a few hours of maximum power consumption it's still stable. This computer is completely stock no OC or OV at all. CPU reaches 62c with P95 large ffts, and GFX reaches 106c with furmark on 1280/1024 (desktop res 1280/1028/ game res 1024/768) 0 fxAA. WOT doesn't use nearly as much power as running both P95 & Furmark separate or together..What can I do?

A:Computer shuts down while in World Of Tanks

My first thought would be the pw supply. Antec pw supplies are NOT recommended for any type of gaming [exception the antec hcg or high current gamer] Those are fine for gaming.
I have ran Furmark and Prime 95 at the same time to see if the PSU is failing and even after a few hours of maximum power consumption it's still stableClick to expand...

What are the voltages under load?

Do you have the problem on any other game?

I believe the max temp for that card is approx 100C so you may be getting close to the max temp. Have you pulled the card and given it a good cleaning with a can of air? Checked that ALL fans in your system are in fact working?

Read other 1 answers

Day 2 and World of Tanks is crashing on startup, then going in, then crashing- intermittent, but making play very difficult.

Just a heads-up for others, and see here also. I did a complete reinstall and this didn't fix it.

Any news I get I'll post.

Read other answers

I have install win 7 professional 64 bit, my World of Tanks game gives error 0xc000007b, how can I fix it?

Read other answers

The title speaks for itself, i have dump files listed below, and i would really like to fix this problem. Thank you in advance.

A:BSOD playing some games/recently playing FIFA World


Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Debug session time: Wed Jun 25 18:40:06.502 2014 (UTC + 6:00)
System Uptime: 0 days 0:00:09.767
BugCheck 124, {0, fffffa8007fe08f8, 0, 0}
Probably caused by : AuthenticAMD
BUGCHECK_STR: 0x124_AuthenticAMD
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Debug session time: Sun Jun 22 03:33:23.804 2014 (UTC + 6:00)
System Uptime: 0 days 0:00:06.240
BugCheck 124, {0, fffffa8007be55d8, 0, 0}
Probably caused by : AuthenticAMD
BUGCHECK_STR: 0x124_AuthenticAMD
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Debug session time: Wed Jun 18 15:45:19.162 2014 (UTC + 6:00)
System Uptime: 0 days 0:00:07.333
BugCheck 124, {0, fffffa8007b727c8, 0, 0}
Probably caused by : AuthenticAMD
BUGCHECK_STR: 0x124_AuthenticAMD

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error an... Read more

Read other 1 answers

Good Morning!

Having some trouble with a laptop given to me by a friend. Attached are the documents requested by the pinned thread.

The system is a Dell Inspiron N7110.
Also attached is a system configuration from the manufacturer. Not sure if that helps at all.
Currently, my troubleshooting options have been as such: Attempted start-up repair. Start-up repair did not resolve the issue. Did a full hardware diagnostics check. All components are good with minor battery issues due to normal aging and wear. After booting to safe-mode, Installed Malwarebytes. Blue-screen upon end of installation. Rebooted, and uninstalled/reinstalled malwarebytes. Unable to fully scan system without a blue-screen.

Any recommendations?

If you have any assistance to offer, I would appreciate it. Unfortunately, I don't have much to give in return at the moment other than kind words. :/

A:BSOD - STOP: 0x0000001E & more

The latest .dmp files don't provide any conclusive evidence as to the crash.

Please do the following:

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.
Driver Verifier - Enable and Disable

Driver Verifier will cause your computer to run very sluggishly - this is normal. What it is trying to do is force your system to BSOD and isolate the offending driver/s. When it does, reboot, disable driver verifier, reboot as normal and upload the new dmp file/s here.

I recommend creating a system restore point before turning on driver verifier:
System Restore Point - Create

If your system fails to boot to desktop once driver verifier is enabled, turn it off by booting into Safe Mode:
Safe Mode

Read other 3 answers

Getting this BSOD error while doing pretty much anything.

Attached is the required information/files.

- x64 (64 bit)(Ultimate)- Windows 7 is the original OS
- Full retail copy
- hardware ranging from about 3/4 years to a few days
- OS installed a few days ago
- Radeon 4850 HD
- Ripjaw 8GB DDR3 1600 MHz Dual Channel
- AMD Athlon II x4 2.9 GHz

A:BSOD - STOP 0x0000001e (While Doing Anything it Seems)

Perfmon reports that drivers for your coprocessor haven't been installed. Please visit the PC Manufacturer's website and download and install the chipset drivers for your system ( http://www.nvidia.com/object/nforce-...56-driver.html ). Then run another perfmon /report to ensure that the update has succeeded.

You only have 55 updates after SP1, most systems have 70 or more. Please visit Windows Update and get all available updates (language packs aren't necessary).

AMD OverDrive (AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center.
Please uninstall the AMD OverDrive program as it can cause BSOD's on your system.
If it's the stand-alone app, uninstall it via Control Panel...Programs...Uninstall a program
If it's in the AMD VISION Engine Control Center, you can uninstall it using the AMD uninstall tool (or uninstall the entire AMD VISION Engine Control Center application through Control Panel

If overclocking, please stop. Remove the overclock and return the system to stock/standard values while we're troubleshooting. Once the system is stable again, feel free to resume the overclocking.

Western Digital software dates from 2008, please uninstall it.
Your nVidia Ethernet Networking Driver dates from 2008 also. You can download the latest chipset drivers (which include the ethernet driver) from here: NVIDIA DRIVERS 15.56 WHQL



Loading Dump File [... Read more

Read other 3 answers

This is the fourth time in two weeks that my system has thrown this error up, I am more than happy to provide any details needed, blue screen viewer shows that it is caused by tcpip.sys.
I am not sure what details to send so you guys can check it out but any help you can give would be very much appreciated.
All the best.

A:BSOD - STOP 0x0000001E please help!

Please follow the below steps.
Upload the actual crash dump files.
You will find the crash dump files inside C:\Windows\Minidump folder. To copy the dumps, disable "User Account Control" first. Otherwise you may receive a permission error. After disabling UAC, copy and zip most recent three or more dumps to a single file. Either attach the zip with next reply using "More reply options --> Attach files" or use a free file hosting site. 
For example -> http://www.mediafire.com/
Publish a snapshot of your system using Speccy.
"Speccy" is a free tool which can list the hardware specs, temperature status, installed Windows updates, HDD SMART info etc of your system. Please read the below tutorial to know how to use "Speccy" to collect system info.
Don't paste the output displayed by "Speccy" here. Instead paste the web link it displays.
Minitoolbox log.
"Minitoolbox" can list all the installed programs as well as event log errors in your system. Download "Minitoolbox" from the below link.
 Run the tool and only select the following tick boxes.
List last 10 Event viewer errors
List installed program
List users, partition and memory size
List Minidumps
Now click "Go" and post the output displayed in next reply.

Read other 7 answers

System is approx five months old Windows 7 64 bit home premium came preinstalled. Please advise if any additional info is needed.
System specs include all devices at time of bsod. I have disconnected the usb drives that were attached

A:BSOD STOP: 0x0000001e

Software Concerns:Security Software: ??? I see Sophos installed, but I do not see it running. Is it running, or is it even actually installed?

Make sure to install security software. I recommend either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.

Analysis:Crashes point to your wireless network adapter. Yours appears to be a USB device with Atheros drivers (you may have a different manufacturer). I would advice replacing the USB wireless network adapter with a Windows 7 compatible PCI wireless adapter. If you cannot replace the USB device with a PCI device, at least get a USB device that is Windows 7 compatible; yours is from 2008 and is pre-Windows 7.

Keep in mind that if you do stay with USB wireless network adapters instead of PCI, they are inherrently unstable. USB ports do not supply adequate power for those devices to work reliably. You are much better off with a PCI device if you can find one that meets your needs and fits your system's hardware configuration.

Read other 2 answers