Over 1 million tech questions and answers.

harddisk crashed

Q: harddisk crashed

Hallo,
 
my laptop, Compaq presario, crashed 2 days ago.
 
I took of the harddisk and i put another one.
 
I installed the windows home premium again , everything is working perfectly, only the sound.
 
The icon is there down in the toolbare and when i play music or something with sound, i see that there is  little bit of movement , but i hear nothing.
 
No sound comes out, i tried almost everything and still nothing.
 
who can help me please?? you are my last resource.
 
Regards
tanya

RELEVANCY SCORE 200
Preferred Solution: harddisk crashed

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: harddisk crashed

When you say 'everything' what did you try?
Did you try updating the drivers?
Did you make sure the volume is full from the speaker icon in the taskbar?
Did you make sure no sounds are muted when you click on mixer?
Are you using external speakers/headphones?

Read other 17 answers
RELEVANCY SCORE 62

Halo.I have replaced my harddisk after a crashed. Never made a recovey disk. How to get the notebook working again.What to do? Must I buy a new OS for the machine and where to buy?

A:Harddisk crashed

Hello, Thank you for posting in the HP Support forum. If your computer originally came with Windows preinstalled, your computer is eligable to original Windows. You can purchase and use HP Recovery media to restore your PC to factory default condition. HP Recovery media might not work if your new HDD is smaller (with smaller capacity) than the original one >> e.g. original one is 500 GB , new one is 128 GB. Please, post this information:>> your full computer model and PN  >> http://support.hp.com/us-en/document/c00033108>> country where you are and where you bought the PC from  Looking forward to your reply.

Read other 1 answers
RELEVANCY SCORE 62

Hi,
 
Toshiba L750, core i5 - win-7 64bit installed. 4gb ram, 600gb HDD,
50gb os, 250gb, 250gb partitions. 8gb Virtual memory on 3rd partition.
 
Used sparingly and working fine until a few days ago. I heard some faint whirling sound (probably the HDD) and in some time the OS crashed.
It went into an infinite loop of shutting down and rebooting trying to recover the system.
 
At some time, I chose command prompt and ran chkdsk on all the partitions chkdsk /f /r
 
It seemed to work, although the computer was only half as fast.
 
After a couple of boots, I only get a blank screen and a cursor at left hand top, post the bios screen.
 
Has my harddisk crashed? If so, how do I get it working back, either with the same HDD or another one
The data is not really important to me ( I have a back up on my desktop)
 
Thanks in advance for your help

A:Has my harddisk crashed ?

Yes it sounds like it.  Here is a video showing you how to replace it.

https://www.youtube.com/watch?v=svTUrXrAa1U

Read other 15 answers
RELEVANCY SCORE 60

I have a HP pavillion dv6, the hard disk crashed and unfortunately i wasn't prepared so have no back up, nor the cd.
I've tried downloading windows 7 home premium ISO copy from mydigitallife.info to no avail!

Without paying for the real copy again what are my options?

Cheers

A:harddisk crashed,no backup or windows7 cd. How do i re-install w/out?

If the laptop was bought from a store, it would already have the serail on the information kind of thing, so you would need to get the install media some how, and use the code on your laptop/pc.

Read other 9 answers
RELEVANCY SCORE 59.2

[not sure if this is teh right section of forum for this post, hope so]
hi, my friend with windows 8.1 64bit has done a system restore with 2 external usb2 harddisks attached. all programs have been deleted and one of the external hdd's has 'crashed' - the other is fine. the crashed one has its driveletter turned into a small partition names 'restore' and the most part of the hdd as a no-driveletter raw partition. the second ext hdd was okay and retained readable data and driveletter.

I have already tried restoring the crashed hdd with third party recovery software, but only a collection of flac audio's are readble after restoring tot the (spacey) internal c harddrive. the majority of mkv's avi's and dvd videos on the hdd are unreadble.

My question is, as the original driveletter of the crashed external usb hdd is now one named 'recovery' , can this hdd (where i manually assigned a new driveletter to the data part of this crashed hdd, which is not readble, save by recovery sw)
be more effectively restored somehow by windows recovery system itself?
If so, how do i go about that task?
(Windows 8.1 itself from inetrnal c drive runs okay, although i had to reinstall all the user installed software)
I am an advanced windows 7 user but have not had much expierience with win8(.1) recovery useage.

help would be nice.

regards, RR

Read other answers
RELEVANCY SCORE 48.4

Hello all,

I need some advice.

I recently replaced my old harddisk to a new harddisk. The old harddisk has windows xp home and other programs installed.

I did not format the old harddisk, I only took out the old harddisk and replaced it with a new harddisk. I then installed windows xp home to the new harddisk.

While I am installing programs on the new harddisk, I discovered that one of the programs do not allow me to activate the program license because I have previously activated the program on my old windows. I need to do a proper uninstallation to release the license, then I can activate the license of the program in the new harddisk.

My question is, can I take out my current new harddisk, replace it with the old harddisk, boot up as normal into the old harddisk windows, uninstall the program inside the old harddisk, then replace the old hardisk with my new harddisk again.

Will I be able to access the old windows on the old harddisk?
Will it mess up my current windows/programs settings?
Will my current new harddisk windows be able to work as normal after accessing the old harddisk windows?
I thought of accessing the old harddisk as a slave, but I do not know if it is possible to access the old harddisk and do a proper uninstall of the program?
Is there any better way of uninstalling the program on my old harddisk?

Thanks in advance.

A:Accessing Win XP on old harddisk to uninstall programs after installing new harddisk

you have to swap out the drive completely. at no time should you have both hdd plugged in.

repeat, do not run them as master and slave. run each hdd individually at each time only.........

Read other 5 answers
RELEVANCY SCORE 48.4

I have 40GB harddisk and now I am moving to 120GB SATA hardisk. But i want all the data with softwares, plugins and all the windows settings to be transferred in the 120 GB harddisk.

There is any way so that all files and setttings will transferred and I dont have to install everything again.

In my system Windows XP Pro SP1 is installed.
 

A:Transfer data/settings from small harddisk to big harddisk

Read other 6 answers
RELEVANCY SCORE 48.4

I have first been getting these problems when I downloaded Comodo IS Pro. Apparently when I approached them for help,the technician did not reply to me after telling me to install.

Thus I did a system restore and the computer could load in normal mode(however the screen,etc loaded slow like hell.)

Yesterday, I downloaded comodo firewall and something familiar appeared

From Problem Reports and solution, these are the service that crashed:

4X svchost.exe
1X lsm.exe
1X sandboxie.exe
1X wininit.exe

But guard32.dll from comodo is the module causing it according to Problem Reports and Solution, but anyone knows why and how to solve it?

A:Svchost crashed, windows start up crashed, local session manager crashed

Have you tried uninstalling Commodo to see if it is causing the problem?

Read other 3 answers
RELEVANCY SCORE 40.8

Yo Bleeping, Long time no see.  Last night Java crashed, then this morning updates failed and things looked a bit fishy. (taskbar went white, start menu jitters, and random programs closing due to I/O device error ) To be clear IE, Java and Malwarebytes have closed due to device error. Also Java and Malware would not update.I am seeing errors such as:  "The instruction at 0x00000000603AEB10 reference memory at 0x00000000603AEB10. The required data was not placed into memory because of I/O error status of 0xc0000185. " Thanks in advance! Scan result of Farbar Recovery Scan Tool (FRST) (x64) Version:25-10-2015 02Ran by Dante (administrator) on DANTE-PC (26-10-2015 12:14:59)Running from C:\Users\Dante\DesktopLoaded Profiles: Dante (Available Profiles: Dante)Platform: Windows 7 Ultimate Service Pack 1 (X64) Language: English (United States)Internet Explorer Version 11 (Default browser: Chrome)Boot Mode: NormalTutorial for Farbar Recovery Scan Tool: http://www.geekstogo.com/forum/topic/335081-frst-tutorial-how-to-use-farbar-recovery-scan-tool/ ==================== Processes (Whitelisted) ================= (If an entry is included in the fixlist, the process will be closed. The file will not be moved.) (NVIDIA Corporation) C:\Windows\System32\nvvsvc.exe(NVIDIA Corporation) C:\Program Files (x86)\NVIDIA Corporation\3D Vision\nvSCPAPISvr.exe(NVIDIA Corporation) C:\Program Files\NVIDIA Corporation\Display\nvxdsync.exe(NVIDIA Corporatio... Read more

A:I/O device error, java crashed, malware crashed unable to update

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/594488 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

Read other 23 answers
RELEVANCY SCORE 40.8

Hi, I love this site and you guys have helped me so much, so first of all, thank you!

Now the bad news.... I got the WIndows Vista Repair virus about a month ago on my Acer PC. At first, it ran all of those warning messages and then it shut down the computer and reloaded as what appeared to be a completely wiped computer. The only icon on the desktop was the Windows Vista Repair. I tried to find programs by searching for a few minutes before trying to shut down (which the virus had also made me incapable of doing), and resorting to popping out the battery to shut it down. I restarted in safe mode with networking and tried to get on this site, but even in safe mode my browser was auto-redirecting me to sales sites. By following instructions for removal on this site, and downloading programs onto a flash drive from a different computer, I was able to get my computer in working order again, although it would still, at times, randomly shut down my internet browser (and the process and amount of time I spent getting it just to that state of operation was ridiculous, much worse than any virus I've EVER had...I can explain what all happened and the steps I took if necessary). A couple of weeks later, I left my computer on while I went to a friend's house for the night, and when I came back in the morning I couldn't get it to unfreeze. I shut it down and for the next two days, every time I tried to turn it on it would just run on a loop, booting up part of the way bu... Read more

A:Computer now completely crashed; started with a WIndows Vista Recovery virus, fixed it, then a couple weeks later it crashed :(

Hello, can you please let me know what version of Windows this is?

Read other 2 answers
RELEVANCY SCORE 34

hi

i have a western digital 160gb caviar blue hd now i want to buy a new one but some questions are bothering me

first is seagate any better than western digital i ask this because 1tb seagate is just slightly expensive than 500gb western digital so should i go for seagate?

second is that if i buy seagate, will it cause any problem to the system having one wd hd and one seagate?

please answer in details would love to hear anything to increase the knowledge

A:help about a new harddisk?

1. you can mix any makes of disks. They are all 'compatibel'.

2. the make does not matter. They are all the same since they all come from the same factories in Thailand. I have a dozen different makes and do not notice any difference.

3. except Seagate - one of those just died on me. The first and only disk that died in my installations.

Read other 6 answers
RELEVANCY SCORE 34

Hello,

Re: Win98SE - Intel 465 Mhz

The harddisk in my PC is 8 GB of which only 2,56 GB is still available now.
From I similar PC (done away in the meantime) I still have a 8 GB IDE harddisk.
and want to place it in my PC.
Please mind that I have never opened a PC sofar.

a) I don't know to what electronic circuit-cable it must be connected (wondering about serial and parallel)

b) then this second harddisk must somehow be connected to and made visisable to the system (by cables I think; however what cables, new ones or
already present)

When I tried to google this subject I only found items on partitioning etc, not
about how to get and connect a second harddisk inside a PC.
Furthermore I have no idea whether there are special well-known problems
related to having a seond harddisk installed (e.g. very slow system)

Advises will be highly aprreciated.

Best regards,
a.ruiter
 

A:add a second harddisk

This may help http://www.perfectdrivers.com/howto/seconddrive.html
 

Read other 3 answers
RELEVANCY SCORE 34

i have an old hdisk on an old pc.
the disk label shows that is 4+ Gigs
when i try to fdisk and format, only half is available
at fdisk options appears to be only 2+Gigs
wtf?
 

A:only 1/2 of harddisk is there!

Read other 6 answers
RELEVANCY SCORE 34

Hello,
a week ago i transferred a list of archived files to my mp4, then the light went off ,when it came back, i can't find the archives on the partition , nor the mp4

also some sound files disappered from the mp4, also files are occupying space whether on the hard disk or the mp4

i tried to show hidden files, but i still can't find the files

so what's wrong ?? , how can i get the files again ??? because the computer shows that they are still occupying space

thanks in advance

Best regards,

A:HardDisk & MP4

  
Quote: Originally Posted by Mitooo


Hello,
a week ago i transferred a list of archived files to my mp4, then the light went off


Hi.

Does that mean you lost power to your computer or drive?







  
Quote: Originally Posted by Mitooo


because the computer shows that they are still occupying space


If you lost power whilst transferring, there is a good chance some of the files will have become corrupt.

Read other 5 answers
RELEVANCY SCORE 34

I have an 80GB IDE Hitachi HD which was formatted NTFS on my computer running Win 7 Ultimate. My problem is that when connected to my computer via external Sharkoon Drive link USB adapter, it is not shown in Windows Explorer but is shown in Device Manager as USB Device and in Computer Management it is shown as ?Disk 1 ? Not initialized? and when clicking on to initialize, an error shows as ?This device not ready?. Same occurred on another PC running Vista Ultimate. Strangely, when connected to IDE inside PC it works perfectly. Can anyone help please?

ASUS P5GC-MX/1333 MB
500GB sata Hitachi HDD
2GB Ram
3.2GB CPU
Windows 7 Ultimate

A:USB Harddisk

Does the USB adaptor work correctly with any other drive?

Read other 4 answers
RELEVANCY SCORE 34

I am trying to setup the 3rd Hard Disk in my CPU. It doesn't seems to able detect my already formated hard disk. Is it possible to have 3 Hard Disk in 1 CPU? If so, how do should I go about it? Do I need to do anything with the Jumper on the Hard Disk?
 

A:3 HardDisk in 1 CPU

Read other 7 answers
RELEVANCY SCORE 34

My computer came with a 10gig hardrive with Windows Me preinstalled. I upgraded to Windows XP Home Edition and have been very impressed it was well worth the 90 I payed for the upgrade pack! I purchased 64MB of RAM to bring my memory from 64MB to 128MB and my computer hasn't crashed ONCE since I got XP! But having two operating systems on one 10 gig hardrive and lots of preinstalled programs such as office has taken its toll and I was warned the other day that my harddisk was nearly full! I deleted all my unnessesary files and managed to get back 1 gig of space but I'm still not happy and would like to get a new 20gig hardrive. It makes more sense to use my recovery disk to return my computer to the way it was when it left the factory and reinstall windows XP on the new harddrive leaving my old operating system on the old C:\ and installing all my programs into the new harddrive. I have two questions about this:

1) Will my computer become dual-boot which i DONT want to happen I want the same setup as I have know but with XP installed on the new harddrive?

2) Will I be able to call my new harddrive B:\ as I don't have a 5 1/2 floppy drive installed and would prefer to have things organised and call it that, if not what will my drive call itself as default as I already have A,C,D,Q,R drive letters already taken?
 

Read other answers
RELEVANCY SCORE 34

Hi!Where can i buy sata cabel to my ideapad y700 because i have ssd but i cant connect hdd harddisk because i dont know where to buy the cabel. I only have ssd m.2 .  Please help me !

Read other answers
RELEVANCY SCORE 34

Hey can anybody tell me which is the best harddisk drive for which i should go??????????I need atleast 250 gb or more of diskspace so suggest me the best HDD with their latest price ????????Thankyou.
 

A:Best HARDDISK

Get Seagate 500GB SATA-II

125bucks.
 

Read other 23 answers
RELEVANCY SCORE 34

Hi which would be the best free hardrive checking tool that would tell me if something is failing or is dead

A:harddisk

http://www.seagate.com/support/downloads/item/seatools-win-master/
http://www.seagate.com/support/downloads/item/seatools-dos-master/

Read other 7 answers
RELEVANCY SCORE 34

I have an ultraDMA harddisk from compaq. I hope to know what is the ATA and RPM value of my 20GB drive. Is there some software that I can use to check it?
 

A:Harddisk

The only 20 GB HDD I could find on the Compaq site is 20GB Ultra ATA 100 Hard Drive (7200rpm)
251974-B21

This was at http://www.compaq.com/products/desktops/options/options_storage1.html
That doesn't mean that there aren't more. The way to know, for certai8n, is to open your system up, and get the part number, or full specs from off the HDD case itself.
 

Read other 2 answers
RELEVANCY SCORE 34

My computer came with a 10gig hardrive with Windows Me preinstalled. I upgraded to Windows XP Home Edition and have been very impressed it was well worth the 90 I payed for the upgrade pack! I purchased 64MB of RAM to bring my memory from 64MB to 128MB and my computer hasn't crashed ONCE since I got XP! But having two operating systems on one 10 gig hardrive and lots of preinstalled programs such as office has taken its toll and I was warned the other day that my harddisk was nearly full! I deleted all my unnessesary files and managed to get back 1 gig of space but I'm still not happy and would like to get a new 20gig hardrive. It makes more sense to use my recovery disk to return my computer to the way it was when it left the factory and reinstall windows XP on the new harddrive leaving my old operating system on the old C:\ and installing all my programs into the new harddrive. I have two questions about this:

1) Will my computer become dual-boot which i DONT want to happen I want the same setup as I have know but with XP installed on the new harddrive?

2) Will I be able to call my new harddrive B:\ as I don't have a 5 1/2 floppy drive installed and would prefer to have things organised and call it that, if not what will my drive call itself as default as I already have A,C,D,Q,R drive letters already taken?
 

A:Harddisk!

Read other 12 answers
RELEVANCY SCORE 33.6

Good morning.I have tried everything that's possible with my laptop.I can't get it to work. I try to do a factory reset but nothing.Is it not possibe to get a windows 10 recovery USB stick from hp support?or Ihave bought one, where can I get one?

Read other answers
RELEVANCY SCORE 33.6

Hi guys,

I built my own computer about 2 weeks ago. The problem is the Harddisk is not detected in BIOS ( Boot recognizes the Harddisk) since the first day. I could manage to load windows and until now everthing is running smooth.
Today I wanted to install a second OS (Linux). I got the message that there isn't a Harddisk on my computer. I tried after that to install a second version of windows with the same result- Harddisk not detected.
I tried to change the jumpers on my Harddisk with the result that Windows didn't start up.
In BIOS everthing is on Auto. What's the problem?

P 4 630 3.0 Ghz
Asus P5LD2
80 GB HDD Seagate IDE
windows xp pro SP2

thanks for your help.
 

A:Harddisk not detected

Read other 12 answers
RELEVANCY SCORE 33.6

Hello everyone! Just got a little question.

I'm trying to upgrade my harddrive I currently have 4G and i just purchased a new 15G HD. I used the program HDCOPY to migrate my data and OS to the new HD. Then i noticed that my new HD also copied the size of the old one and i believe that i formatted it first and i believe it was 15GB before i copied the old HD.

What do i need to do? Do i have to use another program? Do you know any? or there's just one thing that I need to do to get my original size back?

Thanks
 

A:Copy Harddisk

Hi NavigatorX
I have never used hd copy but from this site it looks like there are two different modes of copying. One uses a sector by sector exact disk image (which is what you have done.) The other mode does a logical file copy and leaves the partition table alone. I think this is their

site.http://212.223.28.218/default.htm

I use a program called file copy which I run from windows. I think it came from ontract with an IBM drive. You may also want to consider using a program like partition magic. This will get your partition restored back to it's original size and keep the data as is.
 

Read other 1 answers
RELEVANCY SCORE 33.6

Guys, today I install the 200 GB Serial ATA drive in my system, But after formatting it shows total 189 GB, where 11 GB gone. Anyone can tell me, I am also attaching the partition magic screenshot.
 

A:Where the space gone from harddisk

Read other 7 answers
RELEVANCY SCORE 33.6

Hi.
I have an external harddisk of 1TB recently it became RAW type and i have lot of data in it so I tried TESTDISK but everything goes fine but in the end it happens nothing, it again shows in RAW format and windows ask me to format the disk to use it.

Somebody help me.Thanks in advance
 

A:External HardDisk became RAW

Read other 15 answers
RELEVANCY SCORE 33.6

Hello, My laptop's hard disk and I dont even have a recovery disk.I was wondering how can I activate the windows if I do a clean install using a Win 8 image?There no key label on the back of the laptop either.PLease help guys. Thanks.

Read other answers
RELEVANCY SCORE 33.6

Hello Support, i wanted to know how i could replace the harddisk in my laptop. but i cant find the manual. Help is appreciated thanksPeter

A:Replace harddisk

As we have properly understood your issue you want to replace your hard disk in  your laptop for this please follow these steps: Turn the computer off and remove the back panel. Look for any screws securing your drive to the laptop. Lift the old drive up about 30 or 45 degrees and pull it out.In its place, install the SSD and put the back panel on.Nitin singh guleria

Read other 2 answers
RELEVANCY SCORE 33.6

my laptop is working fine.But i heard only a sparking type of sound.when i contact the technical person he says that it is a hard disk sound ,and it is normal.so my question is ,is it correct that some noise will be there in laptop hdd.

A:harddisk sound

Dear Customer, Without hearing the sound it is hard to judge but it does not sound like a hard drive from your description. Hard drive noise is usually a rhythmic "click" not a sustained "whirr". That kind of noise comes from a cooling fan. We can test the hard drive in the BIOS. Here is a link to  test the harddrive  HP Notebook PCs - Testing for Hardware Failures (Windows 10, 8)  If  issue remains. and if this is a recent purchase, please contact HP Support again for further assistance. Contact HP Support.You can also Check your warranty Here to verify the warranty status  Hope this helps, for any further queries reply to the post and feel free to join us again  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee

Read other 1 answers
RELEVANCY SCORE 33.6

hello guys,

got a strange problem with my laptop when ever I turn on my laptop it boots perfect and I am in my windows then the problem starts here it gets too slow and then i cant go inside anything but the laptop is processing ok then i realised it seems like harddisk is making some strange kind of sound like tik tik but its too hard to hear that sound..

Anyways any suggestions or fixes what can i do with it...
 

A:laptop harddisk

Read other 11 answers
RELEVANCY SCORE 33.6

Hi -

i bought a custom made pc with intel i3 processor, 2 TB or hard disk and 2 GB or ram.

I am not sure why... but i have a felling that 2 GB of RAM is not enough.

FYI
Windows explorer crashed when i visit a specific directory of the a drive. that particular folder has around 100 Videos(Movies) in different formats (mkv, mp4, avi, wmv). The same folder can be accessed through VLC open window.

Problem
Window explorer crashed and asks to restart when opening a specific folder.

A:2 TB of harddisk - what RAM is recommended?

you probably want more, but how about helping us to help you by filling in your system specs>
Update your SevenForums System Specs
User CP (located on the top menu bar) |
Your Profile | Edit System Spec (left-hand column)

To gather info, use Speccy (my favorite) or SIW or System Info

In the System Manufacturer Block, enter:
Manufacturer and Model and
ADD the word laptop, desktop, netbook or tablet.
For example:
Toshiba Satellite L305D notebook.

Provide full windows version info, for example:
MS Windows 7 Ultimate SP1 64-bit

Use the ?Other Info? block for Optical Reader,
Mouse, touchpad, wifi adapter, speakers, monitor, etc

Scroll down and click on SAVE CHANGES.

You will find that in Speccy, you can select info from the display
using your mouse/touchpad and then paste that info into your specs.

SIW is a marvelous program, but the free version does not offer
this capability.

Read other 9 answers
RELEVANCY SCORE 33.6

Dear Sir/ Madam,
My internal hardidsk got spoil, when i am trying to get data from the harddisk it is not access to any other PC
here is details
Toshiba-Windows 7, 32 Bit
please help me to get back my data from the drive
Thank You

A:Internal Harddisk

Do you have an external HDD?
Try with Linux Mint MATE: download and make a bootable USB or DVD. Boot with it, no need to install.
Or alternatively, you can use Copy & Paste - in Windows Recovery Console

Read other 4 answers
RELEVANCY SCORE 33.6

My labtop is y700 15ISKi didn't download any program but i found the used Space get bigger Suddenly this pic : http://prnt.sc/d9yq77in this pic you see the free space is 165gb but before 2h it was 173gbso what is the problem and what i should i do ?

Read other answers
RELEVANCY SCORE 33.6

My hard disk did not detecting when i connect hard disk to the pc the system will restarts
please anyone can help
 

A:harddisk problem

Remove temporarily the HDD while computer is turned off and unplugged. Does it reboot also?
 

Read other 1 answers
RELEVANCY SCORE 33.6

My don't start.I need a recovery cd or usb. On the mean time bought a new harddisk now I need Windows 10.Try to do factory configuration, but nothing. Or simple I can't do that.I have never made a recovery cd. M#: E0K02UAS#: 5CG3254F3L

A:Harddisk problem

If you have previously installed and activated the Windows 10 you can reinstall it without a license key. The hardware id is stored on MS servers and will activate automatically.Use the directions here to "create installation media to use on another pc".https://www.microsoft.com/en-in/software-download/windows10

Read other 1 answers
RELEVANCY SCORE 33.6

Hello

I'm trying to install a second hard disk into my 5 year old
Pentium 3 550 MHz. My original disk is 30 Gigs, and I'm trying to add a Maxtor 120 Gig harddisk as the secondary one. I dont have the full details right now because my friend tried the installtion for me. However the gist of the problem is this: Both hard disks are appearing on the bootup screen (the screen that first shows up when one restarts), the Maxtor 120 Gig as the slave, and the original 30 Gig as the master. However its not appearing under My Computer. To my knowledge the jumper settings are fine.

FYI I'm using Windows XP so the hard disk should be plug n play.

Can anyone advise?

Thanks
Dan
 

A:cant install harddisk

Read other 14 answers
RELEVANCY SCORE 33.6

I am using win7 64, I have eset as antivirus the space on local disk is getting low even though
I had 57 hours ago. I searched and it seems a virus but when I scan the laptop it shows nothing
how can i fix this problem and is it really a virus
I deleted many files I had almost 2 gb and overall space is 450 gb

A:harddisk getting low a virus how do i fix it

If you only have essential data on that disk I would recommend getting an external drive and transfer data in order to take the load off the other drive. A full HDD is a slow one because the read/write head has to scan the whole platter in order to retrieve data. SSDs don't have this problem. Otherwise, the best way to find out why you have low disk space, is to look and see how many restore points you have. If you have your data backed up on another disk (which I recommend). You can delete some of the restore points up to the most recent one. However, I don't recommend doing this unless your confident on the recent restore point. These restore points can take up a lot of space. Other than that, you can go into the 'add/remove programs' and remove whatever you don't need. On the other hand, If you are worried about a virus, I would recommend you seek an analyst in the security forum.

Read other 2 answers
RELEVANCY SCORE 33.6

hi, My HP 255 G3 doesn't boot any more. The harddisk check gives FAILURE ID 9AJE04-7LW8H2-XD7V7A-61CQ03.I could now buy a new harddisk, but that would come without OS. The OS was pre-installed on the harddisk, so where do I get that from? Or can I somewhere buy a new HD with pre-installed OS? thanks,/conny

A:Harddisk failure HP 255 G3

Hello Conny2003, No Harddrive will come preloaded with OS.  If you want the HDD replaced and OS reinstalled together, you will have to send the laptop to HP for service. This will done free of cost if your laptop is under Warranty. If not under warranty, you will have to call HP and look out for Out of Warranty options and charges are applicable. Whenever the Hard Disk Short/Long DST test fails that indicates that the Hard Disk Drive has failed and that requires a replacement to resolve the issue HP will provide a replacement Hard Disk Drive if the Notebook warranty is Active, If not you need buy a SATA Hard Disk Drive from a retail shop nearby  Please Contact HP if your HP Notebook is under warranty, HP would replace the Hard Disk Drive and provide you a Recovery media to restore factory operating system after replacement (if you've not yet created Recovery Discs/USB Media) Note: Back up all the personal data to an external drive if it's possible. Otherwise you could connect the failed HDD via SATA to USB adapter with another PC or same PC after replacement of HDD & re-installation of OS and try copying /recovering the files. You can also refer to the below shown link for further supporthttp://www.wikihow.com/Recover-Data-from-the-Hard-Drive-of-a-Dead-Laptop Please click on the link In order to Identify, Prevent, Diagnose & Recover from Drive Failures on HP Notebook Hard Drives & Solid State Dr... Read more

Read other 1 answers
RELEVANCY SCORE 33.6

Getting Error. 2215-EIT Failure. VA boot record read failure.Ensure drive with VA image is installed correctly. how to solve the issue and its urgent Regards, Yogesh Parate - IT Engineer.

Read other answers
RELEVANCY SCORE 33.6

Hi guys, I want to add a second harddrive to my new Elitebook 840 G4 but I'm missing the correct caddy. There is no caddy built in! Where I can find the correct caddy for the harddrive? best regards,Jet Ren Gen

Read other answers
RELEVANCY SCORE 33.6

Hi,
 
i have a Problem with a System that i don't know how to fix. Every time I start a programm the Harddisk runs with 100%. CPU and Ram are normaly.
The space is half fulled (500GB). It's an Acer Notebook with Windows 8.1 and now it is upgradet to Windows 10. I call Acer and they told me that the
Problem is a Microsoft Update that possibly comes in when Windows 8.1 was aktiv.
Does anyone know thomething about this update?
 
Thanks for help,
 
Aitora
 

A:Harddisk runs by 100%

Please download and install Speccy to provide us with information about your computer.  Clicking on this link will automatically initiate the download. 
 
When Speccy opens you will see a screen similar to the one below.
 

 
Click on File which is outlined in red in the screen above, and then click on Publish Snapshot.
 
The following screen will appear, click on Yes.
 

 
The following screen will appear, click on Copy to Clipboard.
 

 
In your next post right click inside the Reply to Topic box, then click on Paste.  This will load a link to the Speccy log.
 
 

Please download MiniToolBox to your desktop.
 
Right-click on MiniToolBox.exe and select Run as Administrator.
 
You will see an image like the one below.
 

 
Click on the following checkboxes only:
 
• List last 10 Event Viewer log
• List Installed Programs
• List Users, Partitions and Memory size.
• List Minidump Files
 
Click on Go to start the scan.  Once it is finished highlight the text, then copy it and paste it in your topic.

Read other 1 answers
RELEVANCY SCORE 33.6

I have recently had a problem with my pc and have lost important data. I was able to recover some by using recovery software. So i decided to buy a external USB HD for backing up my data from now on. Although the USC HD worked on a friends PC with XP it does not work on mine with a Win 98SE OS.
I can see the HD in windows explorer but when i try to access it, it says that the drive is not formatted and asks if i want to format it. But the HD is already formatted. I did it on the friends machine (XP) where we copied some program files that i might need on my own system (winamp3, anti-spy etc.).

Although i tried hard to get the new HD working with the external usb case i could not succeed so i decided to install it in my case as a slave driver. (Yes, i did changed the jumper settings correctly). Now, both in windows system and bios settings the new HD is visible but no drive letter is assigned to it and i can not access it in windows explorer.

Please, help. I am about to loose my mind...

Thanks,
jt.
 

A:Harddisk problem

Read other 8 answers
RELEVANCY SCORE 33.6

i have hitachi 80 gb external usb harddisk. It has two partition yesterday night i am working on it but suddenly i am not able to access my hard disk so i unplugged harddisk.

now when i click on this drive it gave me error "file and directory is corrupted or unreadable" so i format my drive after almost completion it gives error "windows is not able to format this drive".

when i restart my computer and i click on this drive it gives message "this disk drive is not formated do you want to format it now?" it has two partition so when i click on other partition it works ok but this partition has some problem

when i click on this drive it shows me 0 bytes in used space and 0 bytes in free space. Now what to do i also check this drive with check now but no window is open and check now is not started what to do?

my data in this drive is not important can any software help me for this problem
 

A:external usb harddisk

Read other 7 answers
RELEVANCY SCORE 33.6

i bought an external hard disk its western digital 320gb, i observed data transfer rate of that disk is 30-40mbps only but ability of usb2.0 is 480mbps, how come very less data transfer, is there any way to increase it or any other application to increase it.

help me in resolving
thanking you
sandy
 

A:external harddisk

Transfer rates externally (i.e. USB or Firewire) are recorded in mega bits per second, however ATA and IDE protocols are measured in mega bytes per second. This means 480bp/s translates to 60MB/s (taking into consideration 1 byte = 8 bits). It seems the speeds on external USB drives are bottlenecked at around 40MB/s anyway - so if you're missing out, it won't be by too much.

Speeds also depend on how your external drive (well, inside the enclosure) works and reads the information off the disk. For example, reading from the outer edges of the disk will result in faster transfer rates than if it was reading from the inner part of the disk.
 

Read other 1 answers
RELEVANCY SCORE 33.6

hello I'm back again with his brand problematic disks WD Scorpio Blue. bootscreen loading resulted in a very long time and finally did not find the drive...

how to fix that

A:HARDDISK not bad sector

If you would please list the modle number of your laptop, so we can see if it's a PATA or SATA drive. Or the exact modle number of the drive.
http://www.wdc.com/wdproducts/library/SpecSheet/ENG/2879-701278.pdf

If it's a PATA drive make sure that the little jumper on the drive is set to master or cable select.
http://support.wdc.com/images/kb/scorpio_jumpers.jpg

Thanks Fabe

Read other 2 answers