Over 1 million tech questions and answers.

Blank Screen Freeze Up before Splash screen. Safe mode works.

Q: Blank Screen Freeze Up before Splash screen. Safe mode works.

Very similar to the following problem but i do not have a raid, and it seems that this PC has a raid and i don't, plus it was never really determined what the actual solution was.

http://forums.techguy.org/windows-nt-2000-xp/596146-solved-windows-cant-boot-black.html
The basics: XP Professional Boot up screen, right before the windows loading screen, or direct after the F8 Menu if you hit "Start Windows Normally..." it will just lock up, no HDD activity, blank screen. now BSOD, nothing.

All 3 safe mods work fine.

Ran chkdsk /r in recovery.
Ran proper fixboot procedure.

Went into safe mode and checked the event viewer.

The only concerning message i got was: The following boot-start or system-start driver(s) failed to load:
AmdK8
Fips
nod32drv

Formatting really isnt an issue since i can back up anything i need through safe mode. However its just the fact that the Windows gremlin has struck me again and i must defeat it once more.

I highly doubt this is a hardware issue as it is more of a driver/software issue.

Anymore information for me, or from me that you need, i would be extremely happy.
Thanks for your time.

RELEVANCY SCORE 200
Preferred Solution: Blank Screen Freeze Up before Splash screen. Safe mode works.

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Blank Screen Freeze Up before Splash screen. Safe mode works.

Before I say the hard drive is dying, you need to try the XP repair as you have done most else you can already:
http://www.michaelstevenstech.com/XPrepairinstall.htm

Read other 2 answers
RELEVANCY SCORE 112.8

Strangely, my computer booted just fine last night. My sister checked her Hotmail, and chatted on MSN for a short while. I turned it on this afternoon and it hangs at the Windows XP logo screen. The blue bar in the loading box is still moving, but windows never gets any further. Safe mode works OK. AVG scan shows no infection. I restored my Master Boot Record just in case, but it still won't boot.

I have service pack 2.

Any help would be much appreciated. Thank you.
 

A:Win XP freeze at logo screen, safe mode works.

Read other 16 answers
RELEVANCY SCORE 111.2

ok i was getting help with this another forum but that forum is currently down and the last thing they had my try was to try the last known good configuration if that would boot into windows, well i tryed that and it didnt work, this all started after i used combofix in safemode to remove some virus on my computer and now i cant boot into windows normally so if anyone has any advice please let me know thanks.
 

A:blank screen on boot up but safe mode works

While booted into the safe mode try looking for any error or warning messages in the Event Viewer, which is in Administrative Tools in your Control Panel. You click either application or system on the left side in Event Viewer, then I do click view, filter, then click to uncheck the box for information, apply and ok, so then only warnings and errors will show on the right. Then just double on one of those to open to see the details of it. Maybe try to run the system file checker tool in safe mode too, click start, run, type in this; sfc /scannow , and include that space before the / too.
 

Read other 3 answers
RELEVANCY SCORE 110

I have a Toshiba Satellite C655D laptop running Windows 7 Home Premium. Computer was working like a dream and has been for about a year now, when yesterday I booted up after running Windows update, like always, logged on like normal, only to see a blank screen with only my mouse cursor. Neither Ctrl+Alt+Del nor Ctrl+Shft+Esc work to bring up the Task Manager. I am able to boot into Safe Mode just fine, but of course unable to uninstall the Windows updates to the .NET framework.

I have tried System Restore several times now, both from the Safe Mode and from the start-up recovery options accessed via F8 upon system startup. From the same menu, I have attempted Startup Repair but alas, Windows does not detect any problems (go figure, right? ).

I have ran the Windows Memory Diagnostics Tool to check if my hardware was going bad, and upon completion, it rebooted, once again, to a blank screen after being prompted to log in. Mouse works, nothing else does. Upon pressing Ctrl+Alt+Del I am greeted with the following message after waiting roughly 5 minutes:

"The logon process was unable to display security and logon options when CTRL+ALT+DELETE was pressed. If the operating system does not respond, press ESC or restart the computer by using the power switch."

^Pressing ESC makes the message disappear along with my mouse, so that I am staring at a completely blank screen.

I am on my friend's MacBook Pro right now, I'm really hoping someone can help, but I mu... Read more

A:Solved: Blank Screen after Windows 7 log on; only Safe Mode works

Read other 8 answers
RELEVANCY SCORE 105.2

Okay, here's a little background information.

Bought my PC in 2006. Have had to replace 3 video cards since i've bought it. (One was replaced under warranty, the other I bought).

Since I purchased my PC the only parts I have replaced are: My video card, 3 cards later i'm on my most recent one, EVGA Nvidia 8800 GT http://www.evga.com/articles/378.asp

I also upgraded my PSU to an Enermax Pro 82+ 525w. http://www.directron.com/epr525awt.html

OS: Windows XP SP3

Motherboard : ASUS P5BW-LA http://h10025.www1.hp.com/ewfrf/wc/d...name=c00748726

I mainly use my computer for gaming, after my first video card died i was sent a beefier card http://reviews.cnet.com/graphics-car...?tag=mncol;lst after that my PC was no longer under warranty so I had to buy my next cards my self.


My problem:

I left my computer on while making some food, I had world of warcraft opened. When I finished making food I got back to my computer and moved my mouse to get it out of sleep mode. I run a dual display set up, once my monitors loaded up one of the screens was pure white and the other screen was black. I was forced to hold the power button down to turn off my PC. From there on out everytime I boot my computer up I get my PC's loading screen (which i'm able to acces BIOS or system restore) after my PC's loading screen I get the windows splash screen, after that my monitor is pure black. The PC is still on and running but there's no display. I plugged my monitor into my onboard an... Read more

A:Black screen after Windows splash screen. Unable to acces safe mode.

bump, please help :(

Read other 7 answers
RELEVANCY SCORE 104.4

Hello,
After doing a Windows update, my computer gave a Windows looking message that my hard drive was going bad and to back up my data. I was able to save my user files. Then the pc crashed with a BSOD. I disabled restart after crash. Found the error was 0x0000006B (having to do with a corrupt bootcat.cache file.) Could not boot up windows except for semi windows with my windows 7 disk and Chose Repair, in Recovery console, however it told me nothing could be repaired. Through an option to "find a file" under the Recovery option. I managed to copy a GOOD copy of the bootcat.cache file and I appropriately placed it in E:\Windows\system32\codeintegrity (it was ONLY seeing C: as a system partition) my drive letters were all reassigned.

Sorry this is confusing and a lot of info. Bottom line is, my hard drive is not bad, I see windows on it and all my files and the BIOS recognizes the drive. It is firmly connected and NOT hot to the touch.

From a command prompt I did a bootrec.exe /fixmbr and also /fixboot as the pc was not properly booting up. it still would not boot properly

I am totally unable to go to safe mode (hitting F8) No matter what I do, I get a Windows Splash screen and then my screen goes to a Black Screen with a White arrow cursor, the hard drive appears to be trying to work the light flickers) but it just hangs at the black screen

Again, it refuses to allow me to boot to safe mode. It tries to load the Windows S... Read more

A:Windows 7 splash screen, then black screen NO Safe Mode

sorry for bumping. it seems people get a lot of responses to their questions and i was hoping to get the same kind of response.

Bottom line is, my computer tries to load Windows (7) with the splash screen, then goes to a black screen with an arrow and stays there.

I am unable to boot to safe mode.

I am unable to do a recovery from booting from the Windows 7 Install CD

Read other 3 answers
RELEVANCY SCORE 98.4

Everytime I try to boot...The splash screen freezes after a short time. The POST goes fine. Tried booting to Safe Mode, no luck (I think that's when I got a bunch of text flash on the screen and freeze.) Can't get to a command prompt, either. CAN get into BIOS. Tried reinstalling Windows (although I'd have to pay for it, as it would be my third or fourth re-install), but it froze in the process somewhere. I got to a c: somewhere...I think it was the Recovery Console...yes, it was...but I don't know enough to know what to do. That froze, too, after looking around a bit. Sounds almost like a hardware problem...overheating or something, but I can't figure it out. Built the PC myself, everything was OK except once in a while it'd reboot on its own. I appreciate any help, thanks in advance....

A:WinXPFreezes at Splash Screen, No Safe Mode

the best way to determine if it's hardware is to format/clean install. if it freezes, you've got a hardware problem.

if you have data on your drive you don't want to lose, do a parallel install:
-boot to xp cd, choose to install a fresh copy, leaving the current file system intact.....install on same partition, but choose a different folder, e.g. call it \winxp instead of \windows.
-boot to the new os install
-you should be able to access your data, although you may need to boot to safe mode, login as admin, and take ownership/change permissions
-copy your important data to cd
-format and clean install xp

if it's hardware, and you have spare parts lying around, try swapping parts. but its could also be a driver. a parallel or clean install will determine that. (also, disconnect everything but mouse, keyboard, and monitor.)

you could also try a registry hive swap from the recovery console, but that's a whole nuther post. (yes, nuther is a word.)

Read other 19 answers
RELEVANCY SCORE 98

Hello everyone I have little to no experience with computers. I replaced my broken laptop screen with a new one online. The screen is only working in safe mode. When I plug it in to a television via HDMI it is good to go. I would deeply appreciate any help with this.

Laptop is a Sony Vaio VPCCB25FX
Old screen is LP 156WF1 (TL)(C1)
New screen is LP156WF1 (TL)(C2)
It is up to date with drivers. I have no clue how to fijx this

A:Vaio Screen only works in Safe mode after replacing old broken screen

If the screen in working in the bios and safe mode, then the screen is indeed working.

If you boot into safe mode with networking, can you redownload the display adapter driver?

You could also try Clean Install Windows 7

Read other 1 answers
RELEVANCY SCORE 97.2

I have here my Mother in Laws C670-14D and its developed an issue whereby when you power up the screen is blank. it does have backlight and you hear the windows startup sound that you get before you login as windows starts up.

I can see the screen if I start in safe mode, in fact I'm using the PC in safe mode as I type this.

I did hae a similar problem in the past with another Toshiba laptop and that was windows 8, the issue was connected with power save settings but I've tried all of those and no luck. Also tried the remove battery suggestions, nothing has worked.

I'm guessing windows has done an update that is causing this but I'm at a loss and google has turned up nothing.

Running Windows 10 Home edition 64 bit

Any ideas anyone?

Thanks in advance

Steve

Read other answers
RELEVANCY SCORE 97.2

WinXP Pro
Geforce video 440SE 64MB,

This pc shows bios info (as per normal) then goes to WinXP splash screen and then flickers and then reboots.
Immediately thought it was something to do with the video card... opened the case and the card has a cooling fan that wasn't working... so assumed it was overheating and the cause.

Went out and bought a new Geforce card -- same type and still get the same problem.

This PC WAS working before customer asked me to give it a check-up.
PC boots ok into safe mode.
I've ruled out the processor and the memory (ran tests)... suspect the video settings in some way. I'm not sure what the original monitor was and I just hooked it up to a reg monitor (VGA). FYI, System recognizes the vid card ok in the device manager.

Searched for similar probs .. found some that have not been very helpful.
(One suggestion is to reload WinXP and do a repair of some kind)

Looking for directions.
 

A:PC Reboots after WinXP splash screen (ok in safe mode)

Read other 12 answers
RELEVANCY SCORE 97.2

I'm running Win XP Media Center Edition SP1 2002 now (I reformatted, used to have SP2 installed.) and only recently have I been experiencing this mysterious issue that frustrates me to no end. A little tidbit of information before I go on, somebody installed Windows Virtual Machine (with a windows 98 download from some forum) maybe a week ago. That's when the start-up problems began, so I'm led to believe that this could be the culprit. I have no idea.
Anyway, when it first refused to fully boot, it couldn't get to the Win XP splash screen. I had somebody look at it. He went to the Setup menu and restored it to the optimized defaults. Either that temporarily cured it, or we were lucky. It started up normally and I didn't turn off the computer for maybe two days. After I finally DID shut it down, the problem persisted, however this time it WOULD get to the splash screen, but nothing else. Returning it to the optimized defaults would do nothing. Since the computer was old, slow and flooded with programs I myself didn't install, I thought it was a good time to just reformat the whole darn thing and start fresh. Thirty minutes later, I try to boot up, guess what, the same thing happens. Nothing past the splash screen. It's not like I can restore it to a past setting that worked since the OS is wiped clean. I've read about "faulty hardware" confusing the system, but nothing plugged in that I know of is faulty. Mouse, monitor, keyboard, po... Read more

A:Won't boot past splash screen, in safe mode now

Something unclear here.
You formatted and you start installing Windows.
You go through all installation steps and it won't pass splash screen on very first run?

Read other 7 answers
RELEVANCY SCORE 97.2

I was working on my laptop last night no problems, I shut down normally and return a few hours later, now the thing wont start past XP splash screen (the little blue bars moves across the screen forever), the only way I can get my system going is to start in safe mode. The last time I ran the system I did not install any new hardware or software. I have been battling some spyware recently, namely one called Antivirus 2009. I removed it via Malwarebytes the other day, it came back once, I removed it again and it seems to be gone still. What can I do to fix this? I also cannot run Malwarebytes in safe mode, whenever I do it it freezes my about a minute into the scan on a the follwing item

c:\windows\system32\msobjs.dll

I will post a HJT log below just incase it helps.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 11:19:26 AM, on 6/7/2009
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16827)
Boot mode: Safe mode with network support

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\svchost.exe
C:\Program Files\internet explorer\iexplore.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.accuvisionvideo.com/
R1 - HKLM\... Read more

A:XP won't load past splash screen, only in safe mode

Read other 6 answers
RELEVANCY SCORE 96.8

I'm new here and in hopes of getting this resolved. I just installed the new Norton Systemworks 2005 and rebooted after installation. When the boot screen got up to the blue screen with the Windows XP logo before displaying the login names where you put in your password, it just stops. I restarted a few times and waiting a few more times thinking it may need to 'finish' installing. But each time gave the same results. Finally, I went in with 'Safe Mode' and got in with no problems. Tried again in normal mode after looking around for any obvious problems (none found)... back to square one. Tried again in 'Safe Mode with Networking' and it failed like normal mode so I suspected a networking problem??? The last thing I tried which made me mad is that I tried to uninstall Norton Systemworks in 'Safe Mode' and that failed!! Anyone in these forums know the cure? :dead:
 

A:Unable to get to login screen, works in Safe Mode but in Safe Mode w/ Networking

Just a thought

Safe-Mode
Start \ Run \ msconfig \ diagnostic startup
disable any services attached to your most recent install and restart
should get warning next boot about using msconfig, its ok
One key service that needs to be available is the installer service
Try the uninstall, if doesn't complete
Try the uninstall string in the registry only if you know what you are doing

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall

Under it you will see a list of installed programs. Some don?t show up as words but you can figure out what they are by looking at their values. What you are looking for is the uninstall string. Double click that key as if you were going to modify its value. Do a CTRL + C to copy and then exit the registry editor.

Go to START \ RUN and paste the uninstall sting and hit enter. This should launch the uninstall.

Just a thought though as I am not infront of a test system at the moment. You should research this a little further so you have a clear understanding of what you can and can't do with msconfig.

or simpler yet

Safe-Mode

Start \ Programs \ Access. \ System Tools \ System Restore

Select restore point prior to install of whats giving you the problem.

Again, Good Luck

PS If you try to install it again, turn of antivirus and other open programs etc..
 

Read other 1 answers
RELEVANCY SCORE 96.4

I have a dell Inspiron 9100 (Intel Pentium 4 CPU 3.00GHz) desktop running Windows XP SP3 only. I have one fixed 160GB Hard Drive. I have not changed any settings/ installed/removed any programs recently. My last shut down was normal.
When i started up the pc i got as far as the xp splash screen which i believe it would have stayed on indefinitely. The scroll bar was still scrolling. So I attempted restart and tried again and the same problem occurred. I then attempted to start in safe mode were the BSOD occurred at what appeared to be the end of the driver loading. I got the message unmountable_boot_volume with the error code 0x000000ED (0X869C45CO, 0XC00000BS, 0X00000000, 0X00000000)
The first thing i did was dissemble my pc, unplug/replug all the insides, remove all dust and i even reinserted the drive battery. I tried restarting again and the same issue.
I then went on to google the issue to read what felt like hundreds of similar but never the same issue.

As i usually use my tv as a monitor i thought this could be the issue. So i put in an ordinary monitor and took out all my usb peripherals. Same issue again.
At the stage i thought i would post for help. Not wanting to seem like a newbie i went through all the steps that i did before so i could get the exact error messages to post when i noticed that when i retried safe mode it stopped at a certain point during the driver loading and along the bottom of the screen PRESS ESC TO CANCEL LOADING SPTD.SYS... I Hadn’t notic... Read more

A:XP splash screen loads forever; Safe mode gives BSOD

SPTD.SYSClick to expand...

Remove your daemon tools program, restart and see if the problem goes away.
 

Read other 1 answers
RELEVANCY SCORE 96.4

I'm not really sure that I have a virus/malware issue but it is highly suspected. Windows XP Home is not able to boot and stops at the splash screen even in safe mode. I have tried to locate a problem by booting from CDROM with BartPE and trying to run portable apps like SpybotSD portable and Malwarebytes. Each one was unable to run because they tried to write files to the boot drive, which was a CDROM. The BIOS on this laptop will not boot from a USB device. I have removed the drive from the laptop and have it connected via USB adapter to an XP Pro desktop. I discovered that most directories in the profile areas were unaccessable, "access denied" errors. I manually changed the properties on all the directories that it would allow me to do so I could access the files. There are still several directories in some of the user directories that I was not able to change the access properties, logged in as Administrator.

I need advice as to what proceedure to use next. AVG Free addition hasn't found anything of any consequence but it is skipping any directory that it can't access. I want to find out what is going on as I need to move the data from this PC over to the new PC the customer has purchased. I was able to image the drive using DriveimageXL but I did get a couple of CRC errors near the end of the process. Any help would be appreciated.

Kevin

A:XP home hangs at splash screen will not boot even in safe mode

Not sure why I received no response.

Did an extended hard drive test, took and hour and a half to run, and the drive failed the test near the end of the test cycle. It had perviously passed the quick test. So in answer to my own question, I do not have an infection on this machine.

Read other 3 answers
RELEVANCY SCORE 95.2

Hi there I`ve never posted here before but ive looked over about a thousand threads here trying to find a solution to my problem.
Here`s the problem: I was playing fallout 3 which glitched so I had to hold the power button down till my pc turned off. Now at the windows xp splash screen it crashes, (reboots). It also does this trying to load any form of safe mode. I have a windows xp sp2 cd and I tried to re-install or repair windows but both options result in a blue-screen of death the moment i press `enter` or `r`. I`ve detached and re-attached my videocard, my ram, my dvd burner etc with no success. I`ve messed around with almost every bios option i have only to end up putting them back to default as nothing worked. I am currently running the diagnostic tests on it but all of them so far have passed.

So! I`ve played fallout 3 tons and its never had any problems, at least nothing like this so i doubt it has anything to do with overheating. Also I have absolutely no new hardware, everything should be working fine :(

My pc stats are:
Dell dimension e520 with
intel pentium 4, 3.06g processor
radeon hd3400 on pci-e
1.5 gigs of single channel ddr2 ram at 533mhz
80gig WD sata hd at 7400rpm
running windows xp home sp3, it might be the 64bit edition but my comp is screwed so i cant check it.

A:XP splash screen, safe mode and winxp install & repair all crash

Hello and Welcome to TSF,

What is the psu you are running?
Brand and wattage?

You can open up side of tower to find this out, where power cord plugs into rear of pc.

Read other 7 answers
RELEVANCY SCORE 92.4

Windows only opens in safe mode,tried reloading drivers, last known good configuration,etc. When in normal mode black screen only, when acessing task manager shows all processes stopped and will not allow me to start them.

A:Black screen when start in normal mode, works in safe mode only.

Hello CliffordJ. Microsoft Security Essentials is installed, correct? Many MSE users running Vista (but not all) suffered black screen after login following installation of Update for Microsoft Security Essentials - 4.9.218.0 (KB3140527), released about a month ago. In fact there is already a thread here: http://www.bleepingcomputer.com/forums/t/606422/windows-vista-x64-bksod-after-login-or-no-access-in-normal-mode-suspect-mse/. The posters there disabled MSE 4.9 in Safe Mode by unticking a brand-new setting in the UI (Administrator > Turn on this app). Another method of escaping this situation would be to restore your system to a point before the update was installed, then hide the update in Windows Update. That would allow you to resume using MSE 4.8 if you wish.
 
I am extremely curious why this happens to many but not all MSE users running Vista. If more advanced forum members ask you for further information, I hope you will cooperate. Above all, I wonder if any other security software with real-time protection is installed (or perhaps improperly uninstalled)? Of course there is a possibility that your issue is something else...

Read other 9 answers
RELEVANCY SCORE 92.4

Windows only opens in safe mode,tried reloading drivers, last known good configuration,etc. When in normal mode black screen only, when acessing task manager shows all processes stopped and will not allow me to start them.

A:Black screen when start in normal mode, works in safe mode only.

Hello CliffordJ. Microsoft Security Essentials is installed, correct? Many MSE users running Vista (but not all) suffered black screen after login following installation of Update for Microsoft Security Essentials - 4.9.218.0 (KB3140527), released about a month ago. In fact there is already a thread here: http://www.bleepingcomputer.com/forums/t/606422/windows-vista-x64-bksod-after-login-or-no-access-in-normal-mode-suspect-mse/. The posters there disabled MSE 4.9 in Safe Mode by unticking a brand-new setting in the UI (Administrator > Turn on this app). Another method of escaping this situation would be to restore your system to a point before the update was installed, then hide the update in Windows Update. That would allow you to resume using MSE 4.8 if you wish.

Read other 10 answers
RELEVANCY SCORE 92.4

XP won't load past splash screen, only in safe mode
I was working on my laptop last night no problems, I shut down normally and return a few hours later, now the thing wont start past XP splash screen (the little blue bars moves across the screen forever), the only way I can get my system going is to start in safe mode. The last time I ran the system I did not install any new hardware or software. I have been battling some spyware recently, namely one called Antivirus 2009 from inetavirus.com. I removed it via Malwarebytes the other day, it came back once, I removed it again and it seems to be gone still. What can I do to fix this? I also cannot run Malwarebytes in safe mode, whenever I do it it freezes my about a minute into the scan on a the follwing item

c:\windows\system32\msobjs.dll

I will post a HJT log below just incase it helps.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 11:19:26 AM, on 6/7/2009
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16827)
Boot mode: Safe mode with network support

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\svchost.exe
C:\Program Files\internet explorer\iexplore.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R0 - HKC... Read more

A:Windows wont load past XP splash screen safe mode only. Suspect inetavirus infection

Hello and welcome to TSF.

HijackThis is no longer the preferred initial analysis tool in this forum

We want all our members to perform the steps outlined in the link given below, before posting for assistance. There's a sticky at the top of this forum, and a
Quote:




Having problems with spyware and pop-ups? First Steps




link at the top of each page.

Please follow our pre-posting process outlined here:

http://www.techsupportforum.com/f50/...lp-305963.html

After running through all the steps, you shall have a proper set of logs. Please post them in a new topic, as this one shall be closed.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Read other 1 answers
RELEVANCY SCORE 92

Hey guys, I seem to be having trouble, and I'm not terribly inclined with laptops and computers, mine is an HP G62 laptop, and that's about as far as I know about it. The other day I went to use it, opened it up, I had 3 tabs open (google chrome), and I tried to open a new tab. All new tabs were freezing, and my itunes had frozen as well. I tried closing the laptop, hoping it would go into sleep mode, but it didn't, it stayed running. I reopened it and the screen stayed off, so I did a hard reset (holding the power button to turn it off) and started it back up. I started it in normal mode, and logged on, but after loading from the log on screen, it went to a black screen with just the cursor, and stayed there. I did another hard reset, and started it in safe mode, and now this is how I'm currently running. I've tried disabling the display drivers and restarting, that worked momentarily, but froze shortly after. Next, I tried a system restore, which did absolutely nothing, and then I ran chkdsk and, again, nothing. After all this, I decided to try uninstalling the display drivers, which, once again, did nothing. This seems to be all the info I have gathered from online, and through friends' help, there seems to be nothing left to do that may fix this problem. Anyone have any idea on where to go from here?

A:Black Screen in Normal Mode. Only Safe Mode Works.

Hello ericberard,

 

You?re having a problem with the computer going to a black screen.

 

First test the hardware.


Turn off the computer

As you power it back on, tap the F2 key. This will load hardware diagnostics.

Once the screen loads run the startup test.
 

If this is windows 7 and the startup test pass.


Power back off the computer.

As you power it back on, tap the F8 key. This will load Advanced Boot Options.

Select Last Known Good Configuration.
 

This will take the system back to when everything was working correctly.

 

Clicking the White Kudos star on the left is a way to say Thanks!

 

Let me know how everything goes.

Have a good day.

Read other 9 answers
RELEVANCY SCORE 91.6

Hi, All of a sudden a day before, my computer froze and when restarted it started exhibiting horrendous symptoms-1. windows logo appear,then2. blank screen and no cursor login etc nothing display just sits thereAfter that, I tried to do startup repair but failed.Coming over to Safe Mode it is working fine.I also tried bunch of repairs from there still nothingused the clean boot from msconfig to see if any software causing issue or conflicts and did a system restore, still nothing.checked device manager and there is no exclamation point either that may depict hardware failure.My recent activity-installed "Advanced System care 9" 2 days back but have now removed using safe mode.1 more point it has been a month since my primary HDD is showing SMART error.but if safe mode is working can't we get normal mode backup and running.Please help me out of this conundrum, Any help would be sincerely appreciated.possible options I have in my mind-1.get new HDD and reinstall os2.format existing HDD and install fresh copy but doubt if this issue might returnreadily looking out for other options and would prefer rectifying old one first so that I can avoid a long tedious process of reinstalling everything from scratch.Sincere thanks to any responses.

Read other answers
RELEVANCY SCORE 91.2

I booted up my computer 3 days ago and logged in under my user name, and there were no desktop icons or taskbar, so I restarted my computer and tried every user, still nothing. I went to msconfig to restore it to a earlier point, and when it restarted I went to my user name, and still nothing so I went to msconfig again and booted it up in safe mode, when it restarted, right before the user names screen came up, a black screen with "SAFE MODE" in all four corners pops up for about 3 or 4 seconds, then the user name screen comes up with the ADMIN and the rest of the user names, it doesn't matter what name I log in as it always goes to the same black Safe Mode screen as before but it will freeze there forever. So I had to manually shut it down. When it restarted I hit F8 to get it out of safe mode and chose restart computer normally, then when it restarts the same exact thing thing happens. I've tried every option at the F8 selection screen. So I put in a cd with Mepis Linux on it that my cousin gave me, but I didn't install it I have been running it off the disk. And I have no clue what to do next.

My Specs are: AMD Athlon 2.0 ghz
Windows XP Home Edition (Service Pack 2)
512 MB DDR
150 GB Hard Drive
ATI Radeon 9600

-Does anybody know how to do a system restore in Mepis Linux without reformatting the whole computer
 

A:XP Black SAFE MODE Screen Freeze

Read other 9 answers
RELEVANCY SCORE 90.8

Hi guys, got the vundo.exe Trojan on my computer, was trying to get to safe mode so went through selective startup option and chose safe boot minimal (I think?.) Now the computer is stuck in safe mode and I?ve not go idea how to get back out!!! All I get is a black screen on start up with safe mode in all four corners and a command prompt box. I can only see a few services running on Task Manager. What?s the command to get back to selective startup option!!!! Really want it just to start normally L Thanks a million, Stephen!

A:Safe Mode Blank Screen - Help!!!

You might want to perform a Chkdsk to check for hard disk errors.

http://support.microsoft.com/kb/315265

Read other 2 answers
RELEVANCY SCORE 90.8

Hi guys, got the vundo.exe Trojan on my computer, was trying to get to safe mode so went through selective startup option and chose safe boot minimal (I think….) Now the computer is stuck in safe mode and I´ve not go idea how to get back out!!! All I get is a black screen on start up with safe mode in all four corners and a command prompt box. I can only see a few services running on Task Manager. What´s the command to get back to selective startup option!!!! Really want it just to start normally L Thanks a million, Stephen!
 

Read other answers
RELEVANCY SCORE 90.8

First im sorry that i cant run your sys info program im in safe mode and it wont let me run it. I have hooked my HP pavillion 6000 using 2 amd core II processers, and a raedon 3600 graphics card from ati. I can get more info later if you need it. I have hooked my PC to my Sansui 40" HDLCD tv to use as my monitor. it works for a time and works great then at random intervals sometimes 2 hours sometimes a week the image goes black. this is not sleep mode i have fixed all the settings for this occurance, i have tried to update the driver from ati but the pc is having trouble installling the software. when the screen goes black it will only work in safe mode. I can restore the pc to a previous version a few days prior and it works for a time but the same problem occurs please help i like using my pc like this and would like it to work properly.
 

A:Black screen only works in safe mode

Read other 14 answers
RELEVANCY SCORE 90.8

Hello,I have an HP Pavilion running Windows Vista. The problem I am having is that my screen will only come on in Safe Mode. If I try to start regularly, it gets just to the point where my desktop should open and the screen goes black. I have been trying to self diagnose the problem and I think I may be close, but I can't completely solve it. I am running a NVIDIA Geforce Go 6150 Driver. In reading through some forms I found that this may be a problem so I uninstalled it. After the uninstall my computer opened fine in normal mode and automatically downloaded the driver again. After the driver installs it requires a restart and then will not open in normal mode again. I have went through this process 3 times and each time I get the same results.Although in SAFE MODE, here is my DSS Log:.DDS (Ver_11-03-05.01) - NTFSx86 NETWORKRun by matthew at 9:58:36.92 on Sat 04/23/2011Internet Explorer: 8.0.6001.19019Microsoft® Windows Vista™ Home Premium 6.0.6002.2.1252.1.1033.18.958.311 [GMT -4:00].SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}.============== Running Processes ===============.C:\Windows\system32\wininit.exeC:\Windows\system32\lsm.exeC:\Windows\system32\svchost.exe -k DcomLaunchC:\Windows\system32\svchost.exe -k rpcssC:\Windows\System32\svchost.exe -k secsvcsC:\Windows\System32\svchost.exe -k LocalServiceNetworkRestrictedC:\Win... Read more

A:Laptop screen only works in safe mode

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!Please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.Click on the Watch Topic Button and select Immediate Notification and click on proceed, this will help you to get notified faster when I have replied and make the cleaning process faster.In order for me to see the status of the infection I will need a new set of logs to start with.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.DeFogger: Please download DeFogger to your desktop.

Double click DeFogger to run the tool.
The application window will appear Click the Disable button to disable your CD Emulation drivers Click Yes to continue A 'Finished!' message will ap... Read more

Read other 44 answers
RELEVANCY SCORE 90.8

Hi - my first time using a tech forum so sorry for any newbie stuff. Whilst using my PC it crashed, then when I tried to reboot I get the blue screen. Reboot allows safe mode functionality with netwroking. On one reboot I did see a note saying cleaning boot of a file in john/mydownloads/nvVidia/nvidiaZwinky.driver....or somthing like that but still no joy after that in booting. It's not in that file either when I looked. I've got my Hijack log here for anyone who knows better than me to comment on. All thoughts much appreciated. I've attached my dxDiag as well. Since it's started in safe mode some info obviously missing, sorry.

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 11:49:53, on 22/08/2009
Platform: Windows Vista SP1 (WinNT 6.00.1905)
MSIE: Internet Explorer v8.00 (8.00.6001.18813)
Boot mode: Safe mode with network support

Running processes:
C:\Program Files (x86)\Trend Micro\HijackThis\HijackThis.exe
C:\Program Files (x86)\Lavasoft\Ad-Aware\AAWTray.exe
C:\Program Files (x86)\Mozilla Firefox\firefox.exe
C:\Program Files (x86)\HP\Digital Imaging\Smart Web Printing\hpswp_clipbook.exe
C:\PROGRA~2\MICROS~1\Office12\OUTLOOK.EXE
C:\Program Files (x86)\AVG\AVG8\avgcsrvx.exe

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http:\\www.pcspecialist.co.uk
R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page ... Read more

A:Blue Screen but works OK in safe Mode

HaHa..LOL....it was my ASUS 9800 GX2 that's failed on me. I had 2 in SLI and when the first went I sent it back to PCSpecialists who built it...apparently there's a new card on its way to me....fraid I didn't put 2 n 2 toghether when the blue screen happened, I disabled the card and now the PC boots but using basic graphics drivers.

Sorry for clogging up the forum.

 

Read other 1 answers
RELEVANCY SCORE 89.6

Hi All!
 
I have a windows 7 laptop (can't find my original Windows 7 CD's that came with the comp).
I turn the computer on, enter my password, and everything loads up.
But, I can't open anything once I'm there... Not the desktop icons, not the toolbar icons, not even the start menu! Ctl-Alt-Del doesn't work either!
I had some malware that I removed using malware bytes.  After I removed it, these problems started!  Before then the only problems were some lagging and random video ads playing on pages I was visiting.
I also found "MyPCBackUp" program, which I was told was a virus.  I deleted that too.
The only way I can get ANYTHING done is to open in "Safe Mode with Networking."  I can use most of my programs including anti-virus and chrome.
I've been told that a virus may have corrupted the operating system.
 
PLEASE HELP!
I'm not sure what to do!
 
--Serena

A:Windows 7 - Stuck after log in screen. Only safe mode works!

Can anyone on here help?!?!!?

Read other 4 answers
RELEVANCY SCORE 89.6

Hello all, my BSOD problems are thankfully a thing of the past now! However, I have a new issue that has been quite confusing to me. When I log in to Windows normally, I'm presented with a black screen and a cursor. Through findings of my own I've found that it's because windows explorer is failing to launch. Upon trying to start it by opening the task manager via CTRL+SHIFT+ESC and opening a new task, I'm presented with an error code that tells me windows explorer failed to launch (I believe the code was something like 00x000002...I'm currently at work and don't remember it exactly off the top of my head). So I attempted to restart in safe mode, and that worked perfectly fine. I ran my virus scanner (Kaspersky Internet Security) and found no threats. I then attempted a system restore, and that failed to complete for an unknown reason. The next time I tried logging in to windows normally, it gave me the black screen again. After some frustration, I gave up on trying to fix it for a while and shut the computer down. After turning it on, however, I was able to open windows explorer manually through the same method I mentioned earlier, and it actually opened this time. I ran the sfc scan through the administrator's privilege command prompt, and was told that there were files that were corrupted but could not be repaired. I don't have a windows CD and am not sure where to go from here. Should I start my computer on safe mode with networking... Read more

A:Black screen with cursor, safe mode works

Here is the CBS log I mentioned in the OP. Not sure which information is relevant, but I had to trim most of the document and left just the most recent stuff from the very bottom.

Another note is that upon starting in safe mode, I received a message saying that System Restore did not work, and that an unexpected error occurred while the computer was attempting the restore.
 

Read other 7 answers
RELEVANCY SCORE 89.6

Hi there!

I'm here after spending most of yesterday trying to figure this out myself. I should have just come straight here because you guys have ALWAYS fixed my computer problems in the past.

My computer:

Windows Vista Home Premium (6.0, Build 6002) Service Pack 2; HP Pavillion m9100t; Intel Core 2 Duo E8400 @ 3 GHz; 2.47 GB Ram; 32-bit OS; NVIDIA GeForce 8800 GT; DirectX 10

Problem started when I turned on my pc yesterday morning. I had been walking around doing things and did not notice that it had failed to boot correctly. It was on a repair screen for some time and eventually notified me that it could not repair startup problem. After this I rebooted again and told it not to go to repair but to boot normally. It then went to a blue screen page which of course went by too fast for me to see much. I rebooted, this time in safe mode with networking. I set my computer not to automatically restart and then rebooted again so that I could read the bsod. I wrote down the stop error codes and rebooted to safe mode with networking again. Long story short, I didn't know what the error codes were, but I figured I could search them online. I ran all of my virus and malware scans, got the most recent windows updates (had already been at service pack 2, but there were some other updates) and started surfing the web for solutions. This was done over a period of time since I was also doing other things in the house. I did find that once in every 4 or 5 reboots, it will re... Read more

A:Blue Screen at start up, works in safe mode

Read other 9 answers
RELEVANCY SCORE 89.6

Hey all, I have windows 2000. I turned it on and when I got to the desktop it was all weird. It has like three or four fuzzy split screens. I can get into safe mode and even ran the AVG to check for viruses. I didn't find any. I tried to get the computer to last known good configuration, but that didn't work. Any suggestions? Thanks Lea
 

A:Desktop has a triple screen but safe mode works

Read other 8 answers
RELEVANCY SCORE 89.6

Yesterday when I tried to start up desk top with Vista Office it popped to 'Blue Screen' then out to dos startup selections. Can still start up in Safe Mode.
Tried removing some programs; some will not go.
Checked Problem Signature file
Problem Event Name: BLUE SCREEN
OS Version, etc.
Additional info.
BCCCode 50
BCP1 9cf9d000
BCP2 0000000
ETC.
Don't know if this means anything.
Computer Lenovo
Don't know what else I can supply.
Help please.
 

A:Blue screen on startup, only Safe mode works

Some reasons for Blue Screens
New hardware - software installed.
Device driver - Video driver - corrupted - faulty.
Faulty Ram - Overheating - Dying hard drive etc.
======
Can you get into Safe Mode with Networking?
Check and post
TSG System Information Utility - found here.
http://static.techguy.org/download/SysInfo.exe
======
Post the Minidump files
Create a new folder on the desktop and call it dumpfiles [or something similar]
Look in c:\windows\minidump
Copy the last 4 minidump files to that folder.
Close the folder and right click on it and select Send To Compressed [zipped] Folder.
Windows will compress the file and then save the new zipped file in the same location.
Attach the zip folder by using the 'Upload a File' button.
======
Run a Mem Test.
http://www.memtest.org/
Scroll down to 'Download (Pre-built & ISOs)'
'Download - Pre-Compiled Bootable ISO (.zip)'

Download the ISO file - then burn the ISO to a Cd.
Start the Pc using the Cd and run the memory test overnight or for at least 8 passes.

It is best to run a full scan on individual Ram sticks if you can.
Or run the test but if any errors are shown - then remove all sticks of Ram - test each Ram stick one at a time and test them in different slots.

Guide to using Memtest86+
http://www.bleepingcomputer.com/forums/topic207910.html
======
Run system file checker.
Click Start
Type cmd in search box
Right click cmd.exe to run as administrator.
Type
SFC /SCANNOW
Press Enter
 

Read other 3 answers
RELEVANCY SCORE 89.6

Hi, there:
 
My computer is Windows 7 PC and I got a blank white screen at start up.  I try to get to safe mode and safe mode with networking and it automatically shut down.   I was able to get to safe mode with command prompt but it does not have internet access. Since I don't have internet otherwise, it is quite difficult for me to communicate.  I use borrow a phone with data so I can communicate for the time being.  I was suggested to run combofix and saw this forum.  Attached is the log. 
 
Please let me know what I need to do. 
 
Thanks for your help.
 
wlc2wlc

A:Blank screen and safe mode shut down

Hi, there:
 
My apologies.  I saw others providing a DDS log so here it is.
 
Thanks.
wlc2wlc
 
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64 MINIMAL
Internet Explorer: 8.0.7600.17197
Run by Desmond at 18:42:24 on 2013-03-01
Microsoft Windows 7 Home Premium   6.1.7600.0.1252.2.1033.18.3958.3050 [GMT -8:00]
.
AV: Norton Internet Security *Disabled/Outdated* {63DF5164-9100-186D-2187-8DC619EFD8BF}
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Norton Internet Security *Disabled/Updated* {D8BEB080-B73A-17E3-1B37-B6B462689202}
FW: Norton Internet Security *Disabled* {5BE4D041-DB6F-1935-0AD8-24F3E73C9FC4}
.
============== Running Processes ===============
.
C:\windows\system32\lsm.exe
C:\windows\system32\svchost.exe -k DcomLaunch
C:\windows\system32\svchost.exe -k RPCSS
C:\windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\windows\system32\svchost.exe -k netsvcs
C:\windows\system32\svchost.exe -k LocalSystemNetworkRestricted
C:\windows\system32\svchost.exe -k NetworkService
C:\windows\System32\svchost.exe -k secsvcs
C:\windows\system32\ctfmon.exe
C:\windows\explorer.exe
C:\windows\helppane.exe
C:\windows\system32\notepad.exe
C:\windows\system32\wbem\wmiprvse.exe
C:\windows\System32\cscript.exe
.
============== Pseudo HJT Report ===============
.
uStart Page = hxxp://ca.yahoo.com/
mStart Page = hxxp://www.google.com/ig/redirectdomain?brand=TSCA&bmod=TSCA
mDefault_Page_URL = hxxp://www.google.com/ig/redi... Read more

Read other 4 answers
RELEVANCY SCORE 89.6

Ran Spybot and Adaware.

When I try to boot into SAFE mode, I get a blank screen. Tried to launch explorer.exe from there, but it kept stopping that process.

Logfile of HijackThis v1.99.1
Scan saved at 8:42:08 PM, on 1/11/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton AntiVirus\AdvTools\NPROTECT.EXE
C:\Program Files\Norton AntiVirus\SAVScan.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Program Files\Linksys Wireless-G PCI Wireless Network Monitor\WLService.exe
C:\Program Files\Linksys Wireless-G PCI Wireless Network Monitor\WMP54Gv4.exe
C:\Program Files\Common Files\Symantec Shared\Security Center\SymWSC.exe
C:\Program Files\Common Files\Symantec Shared\ccApp.exe
C:\Program Files\ATI Technologies\ATI.ACE\cli.exe
C:\WINDOWS\system32\devldr32.exe
C:\Program Files\ATI Technologies\ATI.ACE\cli.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Internet E... Read more

A:Winfixer got me, blank screen Safe Mode

Hello and Welcome

Please subscribe to this thread to get immediate notification of fixes as soon as they are posted.


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


Download this tool and save it to your desktop. Then double click the tool and follow the instructions.

VirtumundoBeGone.exe

When its done, reboot and post the log that is created on your desktop called VBG.TXT in your next reply


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


Download and install CleanUp!

Open Cleanup! by double-clicking the icon on your desktop (or from the Start > All Programs menu).
Set the program up as follows:
Click "Options..."
Move the arrow down to "Custom CleanUp!"
Put a check next to the following (Make sure nothing else is checked!):Empty Recycle Bins
Delete Cookies
Delete Prefetch files
Cleanup! All Users
Click OK
Press the CleanUp! button to start the program.

It may ask you to reboot at the end, click NO.


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


Then, perform an online scan with Internet Explorer with Panda ActiveScan Click Scan your PC & a 'pop up' window shall appear. *ensure that your pop up blocker doesn't block it
Click Scan Now
Enter your e-mail address & click Scan Now ...begins downloading 8 MB Panda's ActiveX controls
Begin the scan by selecting My Computer Once the scan is complete, it will display i... Read more

Read other 3 answers
RELEVANCY SCORE 89.6

Hi, my computer has had some problems recently

I had redirect issues on Internet Exploer

I reinstalled Internet Explorer 8 and rebooted
When i rebooted the second time, it started up it went to the black screen which asks if you want to start up in safe mode, last known working configuration etc etc. I have tried all options and none of them work, it sounds like it it whirring into action but then it comes back to the black screen.

Can you please help me?

A:Can't get by Blank Screen (Safe Mode, Last known Good etc.)

<<Hi, my computer has had some problems recently...>>

My guess is...your system still has those problems. Mind sharing exactly what symptoms were exhibited by "some problems"?

Louis

Read other 1 answers
RELEVANCY SCORE 89.6

Alright guys
 
I am having a few problems with windows 7 and I was wondering if there was anyway to fix it without doing a fresh install.  Before I start I must say that I have not changed any of the hardware so I don't know why I am getting this problem now.  My windows 7 home was working then I loaded up a game to play and it froze so I restarted the machine, now all I am getting is a black screen after the windows logo,,
 
I have even tried to go into safe mode and I get the same problem as above.  I can't even repair it because it doesn't find anything wrong with it..
 
I believe it must have something to do with the display settings within windows itself.. So I am wondering if I remove the display driver and reboot if that will solve it. If so how do I do it through the command prompt in repair mode??
 
Please someone help me

A:Windows 7 Blank Screen, Even In Safe Mode - How To Fix?

Hi I had this problem its Windows Explorer not running, to get it running so you can start sorting the problem open Task Manager Ctrl, shift, Esc, then file, New task type EXPLORER & run (enter) all is then as normal. I changed graphics drivers, No good! Microsoft give registry edits they didn't work!! So i ran a full update from a current version, my original install was win 7 & i had installed sp1 so you must run that version. It was run as an upgrade from the running OS so no data was lost.
 
Others reported that the registry fixes worked  but for me  after several days on & off on this machine I found it to be the best way.

Read other 5 answers
RELEVANCY SCORE 89.6

So basically my Nvdia was acting up and a tutorial told me to uninstall the drivers in safe mode and reinstall. but my BIOS menu wouldnt show up so I followed another method using msconfig that manually launched it into safe mode. I didn't realize that it launched in safe mode everytime until you disable it. unfortunately I can't disable it as the computer sends no image to my screen and is blank. so if there is a method to basically force your pc to start in normal mode I could disable the settings and all would be good.

A:Stuck in safe mode with blank screen. need help

Hi, when stuck in safe mode press the ctrl + alt + del buttons together. From the options select "TaskManager" in task manager "new task" type msconfig, go to "Boot" now undo the safe boot option. Restart.

Read other 9 answers
RELEVANCY SCORE 89.6

Hiya all! I have big problems here. First of all, Im trying to troubleshoot a toshiba m45-s169 laptop with windows xp sp2 home in it. The problem was that the screen wouldnt come up until I logged in (you could see a dim image while booting up and an external screen works, so I guess is not the video card nor the inverter since I tried a new one)... so I changed the adapter settings to "auto" and after that I get a blank screen with the backlight on right after windows loading (I can hear the sound when the desktop is fully loaded though). So I try to boot under safe mode but it freezes halfway, still in text mode. I have tried all the options under F8 and none works except Last known good config and normal boot, but I cant see anything. Can anyone help me? Thanks
UPDATE: I took the hd apart and ran a chkdsk from another laptop. It found no errors.
 

A:Blank screen, safe mode freezes

any thoughts?
 

Read other 2 answers
RELEVANCY SCORE 88.8

Currently having problem, in that when I turn on my laptop, it loads very slowly, and when it does eventually reach the sign-in screen it freezes within ~5-10 seconds regardless of whether I have time to enter password or not. I have tried disabling some unnecessary startup processes in safe mode, still no luck though. Every now an then it does work, an will continue to work, even if I put it into sleep mode an restart through that. When I try boot up in safe mode it works fine without freezing. I am running Vista also btw. This is all the info I can think of, I am not incredibly computer literate, but if any more info is required I shall gladly post here if I know how to. Thanks.

A:Freezing on User Sign In Screen [works in safe mode]

Since Safemode works fine, the problem is likely a start-up app.

Use SysInternals AutoRuns - http://technet.microsoft.com/en-us/s...rnals/bb963902

Go through "startup" entries 1-by-1, uncheck a box, see if you can boot into normal Windows.

Regards. . .

jcgriff2

`

Read other 2 answers
RELEVANCY SCORE 88.8

from another thread i read to download the service pack 4 for my windows 2000 pc.....i downloaded it and attempted to load it into my harddrive......there was some error on my pc so the entire service pack would not load at all but it was still on my computer sitting there. i looked and tryed to delete it since it was unusable....it told me that my computer might not run properly if i deleted it.....but since it never really was loaded onto m hardrive correctly i did not think it could do much damage....i deleted it....i logged off my computer.....a few hours later i came home and turned my computer on....within about 15 seconds of turning it on a blue screen popped up saying it could not find the source or the entry to the computer?? ...bottom line is that it would not boot correctly at all. i attempted many times yet the same thing happened. it also prompted to boot in safe mode. i did that but the blue screen popped up again. i am typing this on back-up computer that we have. i was wondering if anybody knows what i can to with my computer to fix it or get it fixed professionally which is a strong option. But I was wondering to see if there was anything that I could do before bringing it to a computer pro.i am fairly advanced with computers but this boggles my mind and I do not know what to do. if anyone knows anything to help me it would help alot.....thanks...
 

A:Blue screen before boot...won't start in safe mode or anything..nothing works.HELP!

Read other 11 answers
RELEVANCY SCORE 88.8

I'm writing this on my phone cause my pc doesnt work. Its screen went black after I used Windows tool to restore a damaged USB stick. I rebooted my pc and when I don't go into safe mode, it tries to do a file check but this fails and it then proceeds to a black screen where I do have my cursor and can move it, but thats it. I have tried many reboots but or doesnt change anything. Getting a little desperate now. Does anyone know a fix?

you can find a picture of the screen i get before going to the black screen upon startup here: http://imgur.com/rqm9bCf
 

A:After repairing a USB stick my pc went to black screen. Only works in safe mode since

Read other 7 answers
RELEVANCY SCORE 88.8

I have scanned through the other posts and the closest thing that I could find to my problem seemed to involve a video card going kaput. I'm just hoping maybe one of you can confirm this for me before I take my pc up to the repair shop and they try to sell me something I don't need.

So, here's what is going on. Yesterday my Dell Dimensions (2500 I think?) was working just fine. I noticed the fan was running for quite some time so I got up to check and just as I suspected virus scan was performing a scan of my system. After the scan was completed I exited out of virus scan and figured the fan would stop running shortly. A few hours later I notice the fan is still running, so when I go to check my pc all I see is a black screen. The button on my monitor is flashing between yellow and red, so I restart my monitor and the test page comes up. It says my monitor is working and to check pc connection. After that I manually restart and the windows logo comes up but then we're right back to that black screen. I am currently in safe mode with networking which is obviously working just fine.

Now -- about two weeks ago the monitor that came with this system died. I snatched an older monitor from a spare pc in the house and attached it to this system. I don't know if that has any bearing at all on the events that have taken place but I wanted to let you know that I had infact made a change recently.

Thanks in advance for your help.
Ren
 

A:Solved: Black Screen on startup BUT Safe Mode works

Read other 11 answers
RELEVANCY SCORE 88.8

Firstly I'm on Win7 64. Over the last few weeks I've noticed that after starting up my laptop, and logging in just fine, the screen would go black for a couple of seconds-- my cursor would appear and I could move it around, but the screen would be black. After 10 seconds or so, the Win7 GUI would load just fine and there I would be.

I restarted my PC at 5AM this morning and it did the same. All I did at that point was send an e-mail via Gmail and shut it down again. At 2PM I went to startup my PC and everything went as usual except the PC never left that black screen with the responsive cursor.

I searched here and found that problem many times, but with one difference-- my PC starts fine in Safe Mode.

I used Advanced System Care to fix some registry errors and am currently running a Malwarebytes full scan.

It might be worth noting that I recently installed Batman: Arkham Asylum and as it was frequently crashing, followed some advice to enable everything at startup, which I did, fixing my game problem. That was around the time the black screen first started showing up, and I assumed it was a result of more things taking place during Windows startup.

Thanks in advance.

A:Black Screen with Cursor on startup, Safe mode works

Please follow http://www.sevenforums.com/crashes-d...tructions.html so we can assist you better.

-Justin

Read other 1 answers
RELEVANCY SCORE 88.8

This is my wife's laptop. The problem started recently, about a week ago When she starts the laptop, often (but not always) there is the hp logo, and then the screen goes black. It does not always happen, and sometimes it happens when the laptop has not been used for a few hours.

The screen seems to wrok okay in safe mode, bit has problems in regular mode. The laptop is about 4 years old, came with Vista, but now has Windows 7 premium home edition. I reinstalled windows 7, but the problem has not been resolved.

Grateful for your advice. Should this laptop be discarded? Repairs are quite expensive in Switzerland, and rather than spend good money on an old laptop, I would prefer getting a new one, if an easy solution can not be found. HP G60-235DX Windows 7 (32 bit), 3GB RAM, plenty of free HD space.

Many thanks.
 

A:Solved: Screen is black in Windows, works ok in safe mode

Read other 6 answers
RELEVANCY SCORE 88.8

Hi folks!

Unfortunately, my 2 year old pushed some buttons on my Lenovo B590 laptop and something isn't right. Upon start up, I get a black screen with a moving cursor. Ctrl+alt+del doesn't bring up the task manager.

I double checked the boot order in BIOS and that looks OK.

Restarting in Safe mode works.

I also updated the video drivers, and (strangely) I was able to restart in normal and everything looked fine. However, when I restarted again after that, I was back to the black screen in Normal.

I've been Googling all morning, and done what I've found. If anyone else has any other suggestions, I'd be grateful for them. And if you have any questions for me, please don't hesitate to ask.

Thanks!

Read other answers
RELEVANCY SCORE 88.8

Hi
Hope you can help, a friend has windows 7 pc 64 bit, windowns won't load, only blank screen, Virus found but unable to delete,
Only way can start windows is in safe mode.
Any help appriciated
Regards
Adam

A:Virus, Blank screen, only start in safe mode

For x32 (x86) bit systems download Farbar Recovery Scan Tool and save it to a flash drive.For x64 bit systems download Farbar Recovery Scan Tool x64 and save it to a flash drive.Plug the flashdrive into the infected PC.Enter System Recovery Options.To enter System Recovery Options from the Advanced Boot Options:Restart the computer.As soon as the BIOS is loaded begin tapping the F8 key until Advanced Boot Options appears.Use the arrow keys to select the Repair your computer menu item.Select US as the keyboard language settings, and then click Next.Select the operating system you want to repair, and then click Next.Select your user account an click Next.To enter System Recovery Options by using Windows installation disc:Insert the installation disc.Restart your computer.If prompted, press any key to start Windows from the installation disc. If your computer is not configured to start from a CD or DVD, check your BIOS settings.Click Repair your computer.Select US as the keyboard language settings, and then click Next.Select the operating system you want to repair, and then click Next.Select your user account and click Next.On the System Recovery Options menu you will get the following options:Startup RepairSystem RestoreWindows Complete PC RestoreWindows Memory Diagnostic ToolCommand PromptSelect Command PromptIn the command window type in notepad and press Enter.The notepad opens. Under File menu select Open.Select "Computer" and find your flash drive letter and close the note... Read more

Read other 27 answers