Over 1 million tech questions and answers.

Lenovo y70-70 touch hangs at Lenovo splash screen

Q: Lenovo y70-70 touch hangs at Lenovo splash screen

Hi guys So i recently ran into a problem, when i try to boot my laptop it will hang at the lenovo splash screen and it will be like that for a long time if i dont turn it off. I tried disconnecting main battery and bios battery, it did help but when i shut it down for like 3 hours came back and turned it on back again it was stuck at splash screen again. I also noticed that when it stuck during boot and i shut it down from the power button and turn the laptop on again its booting normally. Also tried removing all usb devices and booting the laptop and it still does the same hangs at the splash screen. Please guys help. Best regards Gerard

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Lenovo y70-70 touch hangs at Lenovo splash screen

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 114.4

Hello all, I've been trying to figure out an issue with no luck. I'm servicing a M900z 2-in-1 desktop that seems to sometimes hang at the Lenovo splash screen. Sometimes when booting, a 9C or B4 will appear on the bottom right, hanging at the splash screen. What I have tried:- Re-seating Memory & HD. Flashing the BIOS. Re-imaged machine. Checked & updated drivers. Checked for windows updates & all is updated. I used chkdsk utility, along with SFC, & no errors were found. Could the hanging potentially be a hardware issue? This issue seems to be very intermittent - I've had the desktop at my desk for a few days, performing lots of restarts. In the BIOS, it boots directly to the HD. Sometimes it will boot right away & not hang, while other times it will hang for awhile, & eventually boot. When it doesn't boot, I constantly have to restart the machine and eventually it will boot.  Thanks for any support. 

Read other answers
RELEVANCY SCORE 101.2

I've had this lattop for roughly 3 years ... Last year I had a problem and stopped using it and found it now while I'm moving. I want to use it but there's a problem, when I boot it up it won't go pass the black and white Lenovo Splash screen I'm pretty sure I'm trying to get it into Bios but it's not working and If I got to turn it off I f I touch the power button it instantly turns off I don't have to hold it down or anything . Anyone can help please ?

Read other answers
RELEVANCY SCORE 95.2

Hey folks,
 
Got an M93 with Win 10. Lenovo solution center asks to do upgrades on BIOS and a bunch of drivers. Did that, and now I can't boot the computer. 
 
Tried pressing F1 after pressing start button, no help. Can't enter BIOS, still stuck at lenovo screen. Also tried Ctrl+Alt+Del on that screen, blacks out then stuck at lenovo screen again. 
 
Please help and inform, thanks!!!
 
James
 
Mod:  edit Subject line with system type













Solved!

Go to Solution.

A:ThinkCentre: Stuck at Lenovo splash screen after lenovo solution bios upgrade

I would try resetting the BIOS using the jumper, or by taking out the CMOS battery, wait a minute or two, and then replace it and try booting up. See page 73 of the Hardware Maintenance Manaul linked below for location of the Clear CMOS/Recovery jumper (# 20) https://download.lenovo.com/pccbbs/thinkcentre_pdf/m83m93p_hmm.pdf Clearing the CMOS (BIOS)1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer. 2. Remove the computer cover. 3. Locate the Clear CMOS /Recovery jumper on the system board. 4. Move the jumper from the standard position (pin 1 and pin 2) to the maintenance position (pin 2 and pin 3). 5. Reinstall the computer cover and connect the power cord. 6. Turn on the computer and leave it on for approximately 10 seconds. Then, turn off the computer by holding the power switch for approximately five seconds. 7. Repeat step 1 through step 2. 8. Move the Clear CMOS /Recovery jumper back to the standard position (pin 1 and pin 2). 9. Reinstall the computer cover and connect the power cord. Good Luck, 

Read other 6 answers
RELEVANCY SCORE 95.2

Hey folks, Got an M93 with Win 10. Lenovo solution center asks to do upgrades on BIOS and a bunch of drivers. Did that, and now I can't boot the computer.  Tried pressing F1 after pressing start button, no help. Can't enter BIOS, still stuck at lenovo screen. Also tried Ctrl+Alt+Del on that screen, blacks out then stuck at lenovo screen again.  Please help and inform, thanks!!! James

Read other answers
RELEVANCY SCORE 95.2

My girlfriend's lenovo ideapad Z710 won't boot up past the Lenovo splash screen. She turned it on this evening and it just keeps refreshing to the Lenovo splash screen. She can't access the bios as far as I know, and she tried the CMOS battery thing as far as I'm aware and that didn't work. It won't boot into the OS and just keeps refreshing to the Lenovo splash screen. Any help would be appreciated. it's a fairly old laptop but it's needed and we can't seem to get it to boot up again. 

Read other answers
RELEVANCY SCORE 94.8

To make a long story short, I've been asked to help fix a friends mom's U410 laptop which wasnt activiting Windows 8.1 properly (Was Windows 8 OOB). After struggling with the activation for a few hours, I backed up the data and decided to just run the Lenovo one key recovery. During the recovery process, the installation had failed. When I attemped to reboot, no Lenovo splash screen was loading - just a black screen (although i can hear the cooling fan start, and hear the harddrive spin up. I tried to access the boot menu thru the novo button, and nothing would load; still a black screen. After researching for a few more hours, I had found multiple threads about bios updates required to be able to access bios with windows 8, and other threads about gpus on these units booting to a second screen (which i did test, and the second monitor does indicate a signal). None of the solutions on those threads have given positive results.   Basically, I've run out of options and am looking for some suggestions. The only thing that shows up on the display at anytime is the small blue novo menu when the button is pressed (normal start up, bios setup, boot menu, system recovery - all of which just leave a black screen). Thanks.

Read other answers
RELEVANCY SCORE 94

I have a Lenovo G500 Laptop with core I3 and 2 gigs of ram and Windows10 updated OS.Recently it has started to get stuck on the starting LENOVO screen. Laptop gets started when i remove the battery connect it with a charger, but when i again switch it off and then turn it on again, It again gets stuck on the Lenovo screen. I want a permanent solution for it. PLease help me!

Read other answers
RELEVANCY SCORE 94

after blue screen of death, my lenovo is not booting, its stuck on the brand name logo and there is nothing i can do i tried remove the battery, and power up with jus cord and opposite, tried to push one key recovery but that dosent work neither any ideas?OS. win10 x64pentium 2.4ghz6gb ram1tb hddintel 5500 graphics

A:Lenovo G500 stuck at "lenovo splash screen"

The first thing I look at if a machine hangs at startup is the USB ports.  Physical damage can create shorts which cause these symptoms.  Check for bent pins or a tongue broken off.

Read other 3 answers
RELEVANCY SCORE 94

Okay, so my Lenovo N580 IdeaPad with i3 processor is stuck at the splash screen, aka the black screen with Lenovo written on it in bold white letters. I tried removing the battery, then putting it back on, then pressing power button for 45 secs. I also tried pressing the the Novo button (the small round and black button besides the power button) but the screen shows no change and does not go to bios/reset menu on pressing f9/f12 too. What else can I do to get my laptop back on? Please help, all my project work is on my laptop










Solved!
Go to Solution.

A:Lenovo N580 stuck at "Lenovo splash screen"

Dear CPVirani, Welcome in lenovo community, Please try to : 1- Remove the battery and the charger >> Hold on the power button for 20 seconds.2-Connect the charger only >> Hold on the power button for 10 seconds.3-Try to turn on the laptop. Regards,Joseph

Read other 5 answers
RELEVANCY SCORE 94

HiI have Lenovo g500 core i7 ram6 ati radeon 8750 1tb hdd. It's been like a month that laptop freezes at the splash screen. I live in Iran and the laptop is made in China.I've searched the forums and found the "battery removing, 15sec button-holding and AC Adopter pluging" solution and it worked ...but today it's not working anymore ... I'm stuck at the splash screen for 4 hours and this is our desktop pc I'm using to post this message.I really need my laptop! It's my life!Please help ...










Solved!
Go to Solution.

A:Lenovo G500 stuck at "lenovo splash screen"

Hi Azadkv,
 
Welcome to Lenovo Community!
 
I?m sorry to hear that your G500 Laptop is not booting to Windows and hanging at Lenovo Logo and the issue persists even after performing Flee-Power step. Hence, I suggest to perform BIOS reset and check if the issue persists. Below are the steps to perform BIOS reset:
 

To access BIOS menu turn OFF the Laptop and press the NOVO button located beside power button.
Then to reset the BIOS to its defaults click on ?F9? Key and select YES.
Now click on ?F10? Key to save the changes that are done in BIOS, the computer will automatically restart.

Do post us back if the issue persists.
 
Best Regards

Shiva Kumar




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers
RELEVANCY SCORE 92

Hi everyone i have a lenovo Z50 intel i7 16gb ram 1tb hard drive, here is my problem everytime that i turn on the computer for the first time gets stuck in the lenovo logo, however if i turn it off and turn in on again it will start normally. I want to be able to start my laptop in the first attemp, anyone could help me, i already try everything reset the computer, reinstal windows, refresh the computer, removing the ram removing the hard drive and nothing works.. Please help
 
Mod's Edit: Updated Subject line and moved post to the Lenovo Z series notebook forum.
 

Read other answers
RELEVANCY SCORE 92

Hi to all, i have a lenovo s20-30 here with the problem on boot up process.. when i turn power on it just hang on lenovo and a circle loading in a very slow process..I tried :1. Removing HDD and put it back on.2. Unpluging cmos battery,3.reformating4. updating drivers5. check bios, reset to default settings... still not fixing the problem.. it takes an hour before booting into system...one more thing is, when i press power button the monitor just stay black no display at all.. i need to unplug battery and put it back on then power it on,, it will take 5 times before the screen displays..

Read other answers
RELEVANCY SCORE 89.2

My Y50-70 Touch has been sitting in my drawer for over a month now since i only use it for school. I start school tomorrow so i decided to start it up and charge it but it gets stuck on the loading screen with the spinning circle after the lenovo logo pops up. Its been on the booting screen for over 3 hours and wont turn on. Help please!

A:Lenovo Y50-70 Touch stuck on lenovo booting screen

Ive tried resetting the pc, start up repair, system restore and none of them are working. i get errors

Read other 1 answers
RELEVANCY SCORE 83.2

i had issues with my screen it had like splash like the photo.. but less .. only had few lines.. it happen everything when i turn on my laptop for 1 minute after that screen still working fine.. if i turn off and turn on after few a hours it started with the same issues.. i found in lenovo.com this: Causes of display failures:Monitor is not on                                              -? for real i saw the line and my monitor isnt on jajaComputer is asleep                                          -????? i never put my laptop in this mode.... just on or off.Connections not properly connected          -it was working fine just few days ago i started had this issues. also i                                                                                        checked the port and is fineMonitor settings are not correct                    -mmmm I put all my laptop default setting.. and nothingNo POST (power-on-self-test)             &nbs... Read more

A:lenovo y70-70 splash on the screen

Hi Alex88sx22cm,
 
Welcome to the Community Forums.
 
You may check how the display is on another monitor.
Turn off the machine and power on using the novo button (page 62) to access the BIOS set up screen and compare the screen.
 

 
If you have the same distorted display in the BIOS screen but show fine on an external monitor then probably LCD /cable may be the issue and would be best attended with your local service center.
 
Update us how it goes.
 
Regards
 

Read other 1 answers
RELEVANCY SCORE 83.2

i had issues with my screen it had like splash like the photo.. but less .. only had few lines.. it happen everything when i turn on my laptop for 1 minute after that screen still working fine.. if i turn off and turn on after few a hours it started with the same issues.. i found in lenovo.com this: Causes of display failures:Monitor is not on                                              -? for real i saw the line and my monitor isnt on jajaComputer is asleep                                          -????? i never put my laptop in this mode.... just on or off.Connections not properly connected          -it was working fine just few days ago i started had this issues. also i                                                                                        checked the port and is fineMonitor settings are not correct                    -mmmm I put all my laptop default setting.. and nothingNo POST (power-on-self-test)             &nbs... Read more

Read other answers
RELEVANCY SCORE 82.8

ISSUEThe 720 touchpad and touchscreen are the worst.  This issue started out of the box before I had even gone on line.  When the touchpad does work, the right click/left click distinction doesn't work and I have to use the screen, when it's working, for the long hold until the right click options appear. When the screen is working, the ability to close a window and touching it just the right way is dubious at best.  I've tried modifying sensitivity, etc, in the control panel, but there is no difference.   When both window and touchpad stop functioning, I plug in an old HP mouse I have, but when I'm mobile, this means running the mouse down my leg if I don't have a surface to place my laptop upon.  And it also means carrying a mouse with me everywhere I go.  My line of work is often standing and walking with clients so  not really possible in my line of work.   RETURN/REPAIR OPTIONS AREN'T OFFERED OR ARE NOT PRACTICALTo back up a bit, I attempted to return this to BestBuy, but was four days beyond the allowable return date.  I contacted Lenovo, but it's all about mailing it in or turning the laptop over and being without anything for a few days.  Hard to find those few days.  I've tried to live it, but it's been an enormous killer of productivity, not to mention incredible frustration and some embarrsassing typos.    PAST YOGA BUILD WAS GREAT - WHAT WENT WRONG WITH THE 720?My last Yoga 710 wa... Read more

Read other answers
RELEVANCY SCORE 82.4

My son accidentally got his leg caught in the cord of his laptop when he got up and the laptop  fell approximately 2 feet to the tile floor.  It boots up but stays on the Lenovo splash screen.  If I go into the BIOS and select System Recovery it goes through the "Loading files..." process, the Lenovo splash screen appears with the dots going in a circle but, then after about 2 minutes of that the screen just goes black.  If I tilt the screen forward or back I can tell it is still backlit just with nothing to display.  Anything we can try?

Read other answers
RELEVANCY SCORE 82.4

My Lenovo U410 Touch recently got damaged - the hinge broke causing the touch screen to **bleep**.I was told that a repair was not feasible as none of the repair shops near me were able to source the parts needed.I therefore bought a new laptop. However, there is a lot of data on the old laptop that I want to access, including sorting out the licensing of MS Office (by uninstalling from the old one).I cannot do anything about it as the old machine is completely unusable as due to the touch screen being cracked, it seems to think it is constantly being touched in multiple places on the screen. This means that I cannot access the laptop to copy the data or uninstall Office. Anyone know any way around this that doesn't involve taking it to a repair shop to "recover" my data. Cheers

Read other answers
RELEVANCY SCORE 82

Updating Windows 10 (I think to 1607), there were a number of restarts.Now the laptop is stuck at the Lonovo splash screen.Any suggestions on what to do? Thanks [Type: 20DQ-001KUS]

Read other answers
RELEVANCY SCORE 81.6

Hey everybody, I just received my P40 last week as a replacement for another Lenovo device. So far, everything seems to work fine with one exception: When I turn the screen over to the "tablet position", the touch screen and the touch pen show erroneous behaviour.a) As soon as I make the first input with the touch pen, I cannot make any further input with my finger, so the touch input is simply turned off. The Windows setting to ignore touch input when the stylus is used is not active.b) When I try to tap buttons at certain areas of the screen, especially at the upper edge, the cursor of the stylus starts jumping around and shows up at the lower edge of the screen. That means that when I for example tap on the "X" symbol in the upper right corner to close a window, I actually click on some of the symbols in the system tray in the lower right corner. This problem stops occuring as soon as the angle between the two case parts (screen and keyboard) reaches/exceeds approx. 40. It does not matter if Windows is in "Tablet" or "Desktop" Mode. I already tried to manually install another Wacom driver mentioned at https://forums.lenovo.com/t5/ThinkPad-S-Series-ThinkPad-Yoga/Wacom-Tablet-Service-for-ISD-Driver-Win... and https://forums.lenovo.com/t5/ThinkPad-P-and-W-Series-Mobile/P40-Yoga-issues/td-p/3293985. I had no luck trying driver versions 7.3.3.12, 7.3.4.8 and 7.3.4.13. I would really appreciate your help since this issue makes working in the tablet position... Read more

Read other answers
RELEVANCY SCORE 81.6

I bought new, but somehow do not want to workVideo is compared, apparently just enough to buy a new cable https://www.youtube.com/watch?v=cj5L-1l4qzI&feature=youtu.beI bought it herehttp://www.ebay.com/itm/Lenovo-Ideapad-S210-New-11-6-LED-LCD-laptop-screen-with-touch-glass-/1912932...
 
This is a new LCD
This is a broken LCD
 
Moderator note: large image(s) converted to link(s):  About Posting Pictures In The Forums

A:Lenovo S210 Touch broken LCD and Touch screen

Hi Magnutus, welcome to the forums.
 
Please check if you Lenovo S210 is on warranty under with this tool.
After that you can open a ticket with Lenovo for the screen to be fixed, if it is not under warranty it will have a cost.
 
If you are the guys that like to fix it yourself (and it is not under warranty) I can recommend you to check the support site for your model, read the Hardware Maintenance Manual (on the documents area) and check how the machine is organized on the inside. On the parts lookup page you can find the parts number so you can find a replacements for the component that is giving you issues.
 
I hope this links helps you.
Regards
 
 
 
 

Read other 1 answers
RELEVANCY SCORE 81.2

SERIOUSLY LENOVO YOUR UPDATES ARE NOT GREAT,its done something to the BIOS.My desktop Lenovo 93m (i think thats the model... )Its stuck at the screen and to make it worse i cannot even access biosI pressing f2 or f1 or f12 cause thats the way is it not?It updated the other day and now just stuck at lenovo screen, i have removed hdd attempted booting and disk drive. Any solutions?It happen a few days ago, it updated from lenovo centre application.Am i doing the right thing to get into bios? Any solutions? Cause if i get into bios i can wipe the hdd and put a back up in.Please any help would be great!i have number of lenovo pcs and i have set them to not update.

Read other answers
RELEVANCY SCORE 81.2

Hi everyone. I've got a big problem with my laptop. I will explain the whole situation.  I recently upgrade my laptop with a Samsung Evo ssd and a 8 Gb ram ddr3 1600. At the beginning everything was fine but then, sometimes I got screen problems (like flickering) and windows 10 crashed. Now the biggest problem : my laptop is stuck at lenovo logo with loading dots. Even if I try to load USB windows tool (to install new os) it doesn't work. I also tried to install Ubuntu unsuccessfully. I searched on the web all the possible solutions. I temporary removed the battery, ac adapter and hold the power button for 30 secs, but nothing. I also read to remove the cmos battery but I can't locate it in my IdeaPad z500. I also searched on the hardware maintainance pdf but there is nothing about that. I also removed ssd and new ram  with old components but it's still the same. I don't know what to do know, please help me!! I hope I didn't screw my laptop 

Read other answers
RELEVANCY SCORE 81.2

Hi I am new to this community, so I would like to applogise if I mist a simillar subject (I did check some but non resolved my problem). I have a thinkpad t420, I bought a used one. It worked great, and I bought it from a friend, that I trust. I installed a ssd drive, was usnig Linux, and everything worked for one month. But then I bought a HDD caddy, and replaced the CD rom. After that my thinkpad worked for a day (although it didnt recognize the second HDD). The next day I tried searching BIOS for some settings, and after restarting my laptop it was stuck on Lenovo splash screen, rebooting in a loop. I tried:- removing and replacing the caddy with the CD rom,- replacing my SSD drive,- replacing RAM (both slots),- reseting BIOS,- running a diagnostic CD (but it will not boot, neither can I boot from an USB) My google search showed that it could bi a problem with one of the USB pins inside of one of the ports (short circuit or something like that), but I could not finde any damage. So I am thinkig that the motherboard could be damaged, but I can access BIOS, but that is the only thing I can do with it. I would be wery thenkful for any advice or help, before I go to an official Lenovo service for help. Thnak you! Z.













Solved!

Go to Solution.

A:T420 stuck on Lenovo splash screen

Hi Zjaz123456,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are facing issue with not booting to OS on your ThinkPad T420.
Is both HDD &SSD detecting in BIOS?
 
Check with removing CMOS battery, make sure you have disconnected the system from AC adapter and battery is removed.
 
Remove both the drive & battery from the system, disconnect the power adapter. Press and hold the power button for 15 to 20 sec perform this step for 2 to 3 times and then connect only the drive which is having OS installed in it. Use only power adapter to switch ON the system.
 
Hope this helps. Do post us back for further assistance!
 
Best regards,
Hemanth Kumar





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers
RELEVANCY SCORE 81.2

Had a user call saying their computer wouldn't turn on.  Got there and it was stuck at the lenovo splash screen as soon as it boots.  I've brought it back and have tried nearly everything.  There are no POST codes while it boots up either.  The following troubleshooting steps have been taken:Reseated RAMRemoved 1 stick of RAMRemoved both sticks of RAM (I get the no RAM sequence of beeps)Disconnected HDDDisconnected Disk DriveDisconnected both drives at the same time.Reseated all power connections on moboPulled out CMOS batteryHeld Power Button while power was unplugged and battery was removedI don't know if there's any more steps other than getting a new motherboard.  I know you can update the BIOS with a USB or CD.  But if I can't even get past that screen is it possible for me to flash or update my BIOS?  This is pretty much the screen i'm getting.  Nothing else other than "lenovo".  This is not my picture though, as I have an M82 here.


























download.jpg ?5 KB

A:M82 won't get past black lenovo splash screen

Did you do a CMOS reset (move the CMOS jumper)?    See the BIOS update failure recovery procedure in the HMM.   I suggest you do the full BIOS recovery process. 

Read other 1 answers
RELEVANCY SCORE 81.2

I have a friends Lenovo IdeaPad N580 laptop that is stuck on the "lenovo" splash screen (black screen with lenovo written in bold text).  It has a Windows 8 label on the bottom of the laptop.  I have tried the following steps      1)  a. Remove battery and power adapter, then press power button for 20 seconds          b. Plug in power adapter only and then press power button for 10 seconds          c. Try powering on laptop.   Same reults with the lenovo splash screen and nothing else.     2)  Press novo button (next to power button)  Same results with the lenovo splash screen and nothing else.  No menu options or                   bios options or boot options     3)  Press (f2, f8, f12, esc, 'function F2', 'function F8', 'function F12') right after pressing power button witht he same results of lenovo             splash screen and nothing else. Please advise what can I try next to get to the bios or recovery options or boot to the hard drive.

Read other answers
RELEVANCY SCORE 81.2

Hello there, i am having a problem with my laptop i have a lenovo g585 and it had been stuck to the lenovo splash screen and i cant do nothing. I cant use and F1 up to F12 and or delete because it doesnt do nothing i cant access anything. I tried with battery nothing worked i saw in a forum to use the novo button to pres it 10 times and on the 11 time press it for 20 sec and it opened a menu with 4 options i opened used the laptop but than when i turned it off it doesnt open anymore i cant open boot page i cant see windows logo nothing i do seems to matter, can you please help me get a fix

Read other answers
RELEVANCY SCORE 81.2

My laptop was fine was except AMD Radeon card keep being disable due to unsign drivers. My aunt reads that edit the registry can fix it though I tell her do not do this. She then restarts and we reach the splash screen, get the loading wheel, which stays long. Then it reaches a blue screen that tells it have a problem and collecting info and restart. It will do this repeatedly.  I can access BIOS, but I read f8 or shift + F8 can take me to an advance options where I can reset or even factory reset, but it will not do anything. How can I please reset, even if it must be factory reset/ Or if I can somehow get past this, the registry is save so I may load the back up. 

Read other answers
RELEVANCY SCORE 81.2

Hello, As I was restarting my computer last night, I recieved an error with the following message "efi network 0 for ipv6 boot failed".  I tried rebooting the computer and it would always freeze on on the splash screen.  I accessed the BIOS and it reads the HDD but still won't boot.  I tried to to put the computer on legacy support and the problem still persists.  Please help and advise me on what do to do?  Thank you,

Read other answers
RELEVANCY SCORE 81.2

Hello. Can someone help me please. My lenovo G580 laptop is stuck on the lenovo splash screen and I do not know how to fix it.

Read other answers
RELEVANCY SCORE 81.2

Is it possible to turn off  Lenovo TM Splash Screen from Yoga 720 at start up. Usually this can be done in the BIOS for other makers. Thank You.

Read other answers
RELEVANCY SCORE 81.2

I'm trying to repair this machine for my nephew. When I turn it on, it never moves past the Lenovo splash screen. I tried the NOVO button, but it just goes to the same Lenovo screen, and just cycles off again after about 5 seconds. I don't know that much about Lenovo laptops. I've tried pushing the F2, F12, FN+F2, FN+F12 to no avail. I can't get to any BIOS options, or boot it through a boot CD. Any help will be appreciated.    Thanks!

Read other answers
RELEVANCY SCORE 81.2

I have a Lenovo G500s that is stuck on the splash screen when I turn it on. It's done this once before and I was able to get it to work by taking the battery out and turning on the laptop while plugged into the ac adapter, this method is not working this go around... help? 

A:Lenovo G500s stuck on splash screen

And I've tried to access the BIOS system and it will not let me

Read other 1 answers
RELEVANCY SCORE 80.4

Recently,My Lenovo IdeaPad 310-15ABR has been freezing on the loading screen.  Ive done the following steps to fix it.Novo Button? Where's that because there is none. Restart over and over again.  Try Booting into BIOS by FN+F2 and F2

Read other answers
RELEVANCY SCORE 80.4

Hello folks,  I seem to be having some issue with installing Windows 10. I found the Lenovo Upgrade Checklist and followed the steps point for point. (https://support.lenovo.com/gb/en/solutions/ht104203) After downloading the update, it requested a restart and booted up into the update screen. The update got to around 20% and restarted as noted on the update screen.  Once again I'm presented with the Lenovo boot screen but this time it doesn't seem to be progressing, nothing has changed for the last 50 minutes and counting. What was other people's experience through the upgrade? Should I be prepared for a longer wait or is this abnormal to the process? Thanks for taking the time to read! 

Read other answers
RELEVANCY SCORE 80.4

Good afternoon!  I am am wondering if anyone knows approximately how long the TPM update takes for the Lenovo T470? It is stuck on the Lenovo screen and has been for at least 30 minutes. It said it would finish update with BIOS but no it?s not doing anything, that I can see.  Any thoughts?

Read other answers
RELEVANCY SCORE 80.4

Hi, I've been working on replacing the Lenovo splash screen on my E570 using the BIOS update, as described on another thread.  I made a jpg file 270 x 640, 22K and named it logo.jpg in the driver/flash folder.  When I run Winuptp.exe, it reads the new logo, runs through the whole process of installing BIOS 1.88 - but then the lenovo image still comes up. Thanks for any advice!

Read other answers
RELEVANCY SCORE 80.4

Hello! I have done some snooping around, but can't find anything that explivitly solves the problem I have been having. When my P50 is plugged in at my desk (eg. Monitor, Ethernet, Keyboard, Audio Out, Power), and it has shut down / hybernated when I turn it back on it will stick at the LENOVO splash screen (looks to me like it locks up because it won't even let me into advanced boot options).  Temperary Solution: Problem seems to resolve with removal of battery, hold power button, plug in AC, boot with only AC power. (Sometimes this takes several attempts). Thinking about just setting shut down time to forever to avoid altogether.  Causes: I suspect it has something to do with my monitor (just a cheap ASUS off of Amazon), it is not a repeatable problem either, it only happens off a total cold start and maybe only 1/5 times at that.  Other: BIOS Version 1.52  Any opinions are welcome    -P50-Engineering

Read other answers
RELEVANCY SCORE 80.4

When I restart my computer on windows 7, there's an option to hit F12 to chose boot options. I got a computer with windows 8, and now that option is gone! How do I get it back?

PC Model: Lenovo G580

By the way, ignore my system specs. That's my desktop, I'm talking about a laptop.

A:Lenovo won't boot to disc - No option on splash screen

Welcome to EightForums.

Enable the boot menu in the uEFI/BIOS firmware.

Read other 9 answers
RELEVANCY SCORE 80.4

Hi I have attached the dump file. I really appreciate your assistance in getting this resolved. Even after reverting to factory image I still have intermittent freeze issues at the user login splash screen.

A:Lenovo system freeze on user splash screen

  
Quote: Originally Posted by brooksdavid


Hi I have attached the dump file. I really appreciate your assistance in getting this resolved. Even after reverting to factory image I still have intermittent freeze issues at the user login splash screen.



Love to help but no dmp file included in the upload try this method
If you wish to have others assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
* Briefly describe the problem history and circumstances in the same post. Somebody will attend to your query as soon as possible.

Read other 2 answers
RELEVANCY SCORE 80.4

Hi guys, I'm dealing with a problem which is currently (but I sincerely hope, not permanently) rendering my G700 useless.When I attempt to boot my PC it freezes at the Lenovo splash screen. I've waited ample amount of time but nothing appears to happen. One time I waited and managed to get into a Windows troubleshooting menu where I attempted to wipe the PC and start fresh, but this also froze at the lenovo screen soon after. Pressing the Novo button gives me 4 options but it appears to freeze, not allowing me to scroll through the options, or press enter. If I remove the harddrive it tells me to insert media and press OK, but once again, it appears to freeze as pressing enter doesn't do anything. I've tried booting from a USB stick but can't seem to get into any setting which would allow me to do this.I Removed DVD drive as I read on this forum that it was an issue with different Lenovo laptops, and since I don't use it anyway, decided to give it a go, but unfortunately nothing changed :-( If any kind soul could advise me with what I could possibly do, it be would be greatly appreciated as I'm dreading the thought of having to purchase a new laptop. Thanks :-)

Read other answers
RELEVANCY SCORE 80.4

I have a Lenovo Yoga 260 Type 20FD that keeps getting stuck on the Lenovo splash screen.  I can hold the power button, turn it off, back on and it will load fine.  Until the next reboot where it will get stuck at the splash screen.  I've updated BIOS to 1.63 and still no change.  I also reverted the OS back to factory default, but I still get he same behavior.  Anyone have any suggestions? 

Read other answers
RELEVANCY SCORE 80.4

When I start up my Lenovo Yoga 910, I don't seem to have an issue.  As in, it starts quickly, the computer seems to work fine.  However, the splash screen is messed up somehow.  I've searched online for a solution but can't seem to find anybody else that is having the problem. Here is what it looks like: I tried updating the bios, but I am on the latest version.  I really don't want to try and do a factory restart.

Read other answers