Over 1 million tech questions and answers.

G570 upgraded to Windows 10 wifi not working and onekey recovery not working

Q: G570 upgraded to Windows 10 wifi not working and onekey recovery not working

Hi, my g570 laptop had windows 7, the OS has been upgraded to Windows 10, the system became slow now and my wifi is not connecting properly, when i try to open onekey recovery application so that i can revert it to windows 7, my one key recovery software is not working, it says a message "Drivers initialization failed, please reinstall application". Please help me with, how to revert to older operating system or have my windows 10 work properly

Read other answers
RELEVANCY SCORE 200
Preferred Solution: G570 upgraded to Windows 10 wifi not working and onekey recovery not working

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 93.2

Hello. I have an Ideapad V570c using OneKey Recovery 7.0. Some time ago I decided to try the Linux Mint distribution, so I made a Macrium Reflect and Lenovo OneKey backups of the entire system with Windows 7 Home preinstalled and formated the entire hard drive during the Linux Mint installation. After I while I changed my mind and restored my laptop back to Windows using Macrium Reflect restore (I made a full disc image before I installed Linux Mint). It booted back to Windows sucessfully but after that OneKey recovery button did not work anymore. I ran OneKey recovery in Windows and clicked on "System Recovery" to restart the laptop and boot the OneKey recovery environment, but it boots back to Windows, to my login screen. After that I used the Lenovo factory default recovery discs and still, with default factory Windows installation on my laptop, OneKey recovery doesn't work. I noticed that there's an ubuntu boot option in my BIOS boot order. That might be why OneKey recovery dosen't work, but I don't know how to remove it from the boot list. Browsing the forums I found my solutions but none of the worked. Here's what I tried:- Boot fix/ repair using Windows recovery disk.- Boot fix/ repair using Macruim Reflect recovery disc.- I removed the hard drive, turned on my laptop, went to bios and out, shurdown the laptop and put the hard drive back in.- Ran a BCD repair in EasyBCD.- I checked the partition table in PTEDIT32. There are four partitions and their types are 07 0... Read more

Read other answers
RELEVANCY SCORE 90

Hi All,

Recently I have upgraded my Lenovo G580 laptop from windows 8 to windows 8.1. After up-gradation Wifi is stop working. I have checked the WIFI device driver(Broadcom 802.11n) in device manger and it is showing working fine but in the Networks section the Wifi is showing disabled.

I have search a lot but not find any solution. Please help me to find the solution for the issue.

I am attaching the screen shot of the device driver property and the my network panel.

Regards
Vivek

A:WiFi is not working when upgraded the OS to Windows 8.1

Hello,

Have you downloaded the driver for Windows 8.1 at the Broadcom site?

If that didn't work, you might want to try the Program Compatibility Assistant and use the Windows 7 Driver, instead of the Windows 8 or Windows 8.1.

Read other 3 answers
RELEVANCY SCORE 88.4

Hi i used Acronis true image to make a backup and after restoring the image i made with Acronis, onekey recovery wont let me restore with a message saying "The program cannot restore the system partition because its structure is incorrect.  You may have to recreate the partition to continue" i have been using Acronis for years and have never had a problem with it restoring to factory settings but obviuosly it has changed something so that onekey wont work.   cheers

Read other answers
RELEVANCY SCORE 87.6

Hello. I wanted to recover my computer to it's start. But i couldn't it says two errors (In Polish):-1234 Client_System_Software-Windows Script Host Script: X:\OneKey\main\lrscall.vbs Line: 2 Char: 1 Error: Nie mo?na odnale?? okre?lonego pliku Code: 80070002 Source: (null)and after those two errors laptop does restartMy computer stats:LENOVO IdeaPad Y700Windows 7 (But laptop orginal system is Windows 10)and i don't know what do you need more to know.I just need help! I need to recover my computer to it's fabric stats.

Read other answers
RELEVANCY SCORE 87.2

I just upgraded my Windows XP Toshiba Satellite laptop to Windows 7 and now the sound card, and the wifi feature (where it looks for signals) does not work! Is there a way to fix this, or maybe even revert back to XP. I didn't make a back-up disc.. but if there is a way to do so, I'd like to. Thanks!
 

A:Sound card and wifi stopped working once I upgraded to Windows 7?

Update the drivers to run them. Go to computer>system properties>device manager and look for updates for the audio and network adapter drivers
 

Read other 1 answers
RELEVANCY SCORE 86.4

Hello. I wanted to recover my computer to it's start. But i couldn't it says two errors (In Polish):
-1234 Client_System_Software
-Windows Script Host
 Script: X:\OneKey\main\lrscall.vbs
 Line: 2
 Char: 1
 Error: Nie mo?na odnale?? okre?lonego pliku
 Code: 80070002
 Source: (null)
and after those two errors laptop does restart
My computer stats:
LENOVO IdeaPad Y700
Windows 7 (But laptop orginal system is Windows 10)
and i don't know what do you need more to know.
I just need help! I need to recover my computer to it's fabric stats.
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

Read other answers
RELEVANCY SCORE 85.6

Help!   I upgraded a Lenovo G770 laptop from Windows 7 to Windows 10.   I had network and sound issues that could not be resolved so I decided to revert using the recovery option found in settings.    It appears things are back, but now I need to do a clean install of Windows 7.    The Lenovo OneKey Recovery button on the laptop should boot the OneKey application to get a clean install of factory setting, but it now appears to be broken; I come up in Windows.  Now on the drive, I see  applications, drivers and Windows10 upgrade (now empty) folders.    The drivers folder still has OneKey drivers, but the applications folder does not have OneKey, but I'm not sure if it should.  Using the OneKey application from Windows 7, it let me make DVDs of the factory install, but I'm worried that the Microsoft Windows 10 upgrade changed these files too.   Did the Windows 10 upgrade or revert wipe out the Windows 7 factory install files?  How can I verify?How can I get the OneKey button to work again?I appreciate any help you can offer.Thanks!

Read other answers
RELEVANCY SCORE 76.4

onekey isn't working for me and i don't know any other ways to reset it 

A:I've been trying to reset my laptop but its not working and onekey isn't working for me

Sorry to hear you are having a problem, Can you please provide provide the model number of your laptop, what version of Windows you are running, and any other details you can provide regarding the problem you are trying to resolve?  Take Care, 

Read other 1 answers
RELEVANCY SCORE 74.4

I upgraded my OS to Windows 10, and after the instalation, I realized that  when i press the OVERCLOCK button on my to  on my desktop to run the overclock it doesnt light up or run  nor can i run the aplication when i click it on my computer (the one that allows me to switch from basic, extreme etc.) I would really appreaciate some help with this. Thanks
 
(My Desktop is a Erazer x510 desktop 10140)
 
 
Mod's Edit: System model added to Subject line to improve visibility / clarity













Solved!

Go to Solution.

A:Erazer x510 - OneKey Overclocking Not Working After Windows 10 upgrade

*Bump*

Read other 9 answers
RELEVANCY SCORE 71.2

Hello,

One of the kids came to to me with his laptop (Toshiba, Windows 7), that he can no longer boot up.

When attempting to boot it shows the screen with the F2 and F12 options, then goes black, with the flashing cursor in the top left which disappears after a few seconds.

After 10 minutes or so a message appears saying (in German) that there is a problem caused by external media being removed incorrectly (USB), and the option to proceed or cancel. Either of these options causes the failing reboot process to repeat.

F8 to go to safe-mode didn't work. (no reaction at all)
Booting from recovery disks didn't work either. A message saying windows is loading files appeared, and then it went to the blank screen as before.

I then tried booting using a Ubuntu Live CD, so that i might at least be able to back up his files, or even somehow force a safe-mode windows restart by changing some setting manually. ( I dont know how to do that but i figured it must be possible).

Even Ubuntu had problems. It started but was extremely slow, and it didn't show his files. (It DID recognize the USB devices though, and they worked). I havent found any settings to help with forcing a safe reboot.

Anyway .. does anyone have a advice on how i can get this laptop to run again, taking all of this into account?

Thanks in advance.

A:Windows 7 Not booting. F8 Not working. Recovery Disk not working.

Start with the free bootable diagnostics (hard drive, memory, and anti-malware) here: Hardware Diags

Read other 1 answers
RELEVANCY SCORE 70.8

Hello, How can i downgrade a laptop that came pre-installed with Windows 7?  It was automatically upgraded to Windows 10 and runs too slowly.  Microsoft will not let me download image, instead they direct me to Lenovo.  I called the Lenovo number listed in one of the posts on here, but after giving the rep my serial number, they told me to call Thinkpad support.  I thought I would check here before continuing to run around.  Thanks 

Read other answers
RELEVANCY SCORE 70

Sir actually i am from india my brother purchased my hp envy m6 w103dx laptop in april 2016 from united states.on 27th sep. I updated my windows 10 which was given with the laptop at the time of purchasing. After that my system wifi and Ethernet drivers are not working. I went to service centre and they told my recovery media has currupted and i have no recovery cd.they are saying that they cant help because i purchased it from US. What i should do now and infact its 5 month gurentee also remaining.please reply if anyone has any solution.its urgent..

A:Wifi Ethernet drivers are not working Recovery media also c...

Hi, What is your laptop ? Please use the following instructions to find out the model/product of your machine:  http://support.hp.com/us-en/document/c00033108 You have to order from the US.  Please use the following instructions:      http://support.hp.com/us-en/document/bph07143Regards.  

Read other 1 answers
RELEVANCY SCORE 69.2

We did a recovery back to factory settings on Windows 8.1 due to problems we were having.  We then updated to Windows 10.  The windows that it opens to after putting my Microsoft password in is the old "desktop" from Windows 8.  It is not working properly at all.  There is no place for apps like on Windows 10 that comes with a new computer.  Can anyone help. You have to right click the windows button in the left hand corner to even get to an area where you can get on the web.  There was a search area that was to the right of the windows button, but you could not type anything in the box.

Read other answers
RELEVANCY SCORE 68.8

Hi all, My notebook Lenovo G570 is not charging. It is running only on battery, when I plug AC power, it is not charging, little LED indicator for AC power in front of notebook is light up, but not charging. And led indicator on adapter is lighting, so adapter is working I guess, maybe there is problem in notebook?I tried start Windows only with AC power without battery and nothing.I also tried unplug AC power and battery and hold start button for 30 sec but still nothing. I have only 28% of battery and if I will have 0% I do not know what to do, because I will not able to start Windows with no power.Thanks

Read other answers
RELEVANCY SCORE 68.8

Device manager?My AMD 6300M Series is no longer detected by Windows 7 , 8.1 or 10 i installed many windows version but still not detected even in device manager . I Enabled Switchable Graphics on BIOS still nothing appear . Please in need your help customers very quickly ...  

Read other answers
RELEVANCY SCORE 68.8

Hello allI've been using Lenovo G570. I've plugged a damaged seaker into the audio 3.5m jack(or what do they call it) and it damaged it too. However, the internal speakers are working fine. I went to nearest repair shop and they told me that it's internal sound card have to be replaced. One guy there, tried to change to 3.5m jack only but it didn't resolve the problem.Now, i want to purchase the sound card. I want to know, which sound card do they use in G570? Or please suggest any other compatible card? Thanks in advance

Read other answers
RELEVANCY SCORE 68.8

The touchpad is not working.
I reinstalled Touchpad drivers from Lenovo website and it didnt help. I also
installed the Synaptics latest drivers but that didnt help either.

I reinstalled Windows 7 but that didnt help. Installed Windows 8, That didnt help either.

Clicking "Mouse" on "Control panel". gives me the message " Unable to connect to Synaptics Pointing Device Driver"

I'am currently using an external mouse. I also uninstalled the external mouse, rebooted, but Touchpad didnt work.
At some point the touchpad did work for a few minutes then stops working again. I also checked the touchpad connector and its all well connected

Any ideas?
 

A:Touchpad on Lenovo G570 Not Working

Is it enabled in the BIOS?
 

Read other 1 answers
RELEVANCY SCORE 68.4

I have not been able to create a backup with OneKey Recover. I get an error saying "Current system cannot support back up". I tried it fresh out of the box with no changes being made to my partitions. Anyone know what the issue could be?

Read other answers
RELEVANCY SCORE 68.4

I have bought a new laptop Lenovo Yoga 500-15isk, but the OneKey Optimzer is not working on the system. Even I have tried to download and reinstall it. But the message pops-up stating that the install shiels wizard is not allowing it to install it, and also removes all the component of OneKey Optimizer. Even after many times contacting the lenovo also there is no solution. Can anybody help me out with this problem.#OneKeyOptimizerNotWorking

Read other answers
RELEVANCY SCORE 68.4

Hi, One and half year back i have upgraded to windows 10 which is provided as free upgrade by Microsoft. Unfortunately the sound is not working. It works sometimes and will not work sometimes. When it works i am not sure. Can somebody help me in getting this rectified and provide me the detailed steps as how to trouble shoot the issue and make the audio work.The laptop is also very slow. Please help me trouble shoot the issues to make the system fast. Thanks for the help provided

Read other answers
RELEVANCY SCORE 68.4

Hi, I recently upgraded my OS to Windows 10 on my HP Pavilion x2 10-n018TU, but now the webcam is not working. And I was not able to update the "Doritos 1.0 - Ambient Light Sensor Driver - Win10 x86". I tried several times but it still failed to install.  Please help... Thanks.

A:Webcam not working on Pavilion x2 (Windows 10 upgraded)

Hi @Bongskie?,Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion x2 - 10-n018tu Notebook and issues with the WebCam drivers. I would go into the Device Manager and remove this Doritos 1.0 driver and software. The Ambient Light Sensor driver is located here: sp72639.exe Then try installing this sp72640.exe  Here is a document that will help troubleshoot the WebCam on Windows 10 using Youcam Software. Restart the Notebook and try the WebCam.Please let me know how this goes.Thanks.

Read other 2 answers
RELEVANCY SCORE 68.4

Had windows XP operating system with the dell MediaDirect installed. Now have Windows 8 and can not use the MediaDirect to watch movies. Is there any software out there I can use with Windows 8 so I can watch movies. Before when I had XP my laptop came pre-installed
with the Dell MediaDirect. I was able to hook up my projector and play movies at Church using my laptop-Dell Inspiron 1520 and the Projector. Now with the Windows 8, I had to upgrade to from XP because XP was no longer supported my computer is not recognizing
DVD Movies and the buttons on my computer I use previously to turn on MediaDirect no longer works. Can anyone help me by either telling me about new software I can get to go with my computer and Projector so I can play movies or how I may use what software
I already have? I can not afford to replace my 8 year computer!

Read other answers
RELEVANCY SCORE 68

Spoiler (Highlight to read)  My laptop madel is Lenovo g570 It suddenly stopped working while I am working on it. Its is also not showing any response on using power button is it dead.plsplspls!!! need suggestions.

Read other answers
RELEVANCY SCORE 68

Dear Friends, Am using Lenovo ideapad G570 from last 2months in my laptop some keys not working  (N,B,Left,Right,Up Arrow and Space bar) Kindly Suggest me For resolving the issue.

A:My lenovo ideapad G570 some keys are not working

hi vickydy,
 
Welcome to Lenovo Community Forums!
 
    First make sure this is a hardware concern.
Run an Onscreen Keyboard, by Pressing (Windows key + R) then type in OSK then hit enter
   Now on your onscreen Keyboard click on the keys that are not working see if they responding with the Onscreen keyboard.
     If the keys responded using the Onscreen Keyboard, Then your Keyboard hardware is bad.
Either you call Technical Support to have them repair the unit in / out of warranty repair OR Ask them where to get the part for it and have the keyboard replaced.
 
Hope this helps
Cheers!





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 6 answers
RELEVANCY SCORE 67.6

I bought a Gateway E56R41u to replace my Acer netbook. I'm really happy with this machine. However, I downloaded the free upgrade to Windows 8.1 and my audio quit working. I've downloaded all the drivers that I could find and nothing works. Is there a driver for another machine that will work with my Gateway?

A:Realtek HD Audio stopped working after I upgraded Windows

There is a generic driver available from RealTek, but if you have reinstalled the correct driver from Gateway, I doubt that the direct from RealTek will help.

Are there any other problems that you are aware of, after the 8.1 update? I don't recall this being a problem with audio.

Go to the Device Manager and display what is listed in the Sounds Video and Game Controllers section. Post back on what is listed there, including any error codes. Better yet, post a screen shot of that section.

Screenshots and Files - Upload and Post in Eight Forums

Read other 1 answers
RELEVANCY SCORE 67.2

I want help. I have dell inspiron 1500 laptop earlier I had windows XP and I used to connect my laptop to TV using S-Video cable and FN F8 key

now i upgraded my operating system to Vista and from then I am unable to connect to TV as my F8 it seems does not work

does anybody else faced the same issue after upgrading to windows Vista can anyone suggest me any solution

Read other answers
RELEVANCY SCORE 67.2

This happened when I first upgraded from Vista to 7 32-bit last year, when the front output jack stopped working, and I ended up getting an extension cord to travel from the rear port.

Now I've upgraded again, and none of them work. I've got up to date Realtek codecs.

Any help is appreciated. I know I need to give more information, but it's 3am here and I can't for the life of me think what it should be.

Thanks in advance

A:(Realtek) Upgraded to Windows 7 64-bit, headphone jack stopped working

HEY, WE HAVE THE SAME PROBLEM!
I tried everything, something isn't right here all of them don't fix my problem. I tried to restore to early time before I update it, it didn't work. I tried to follow every single instruction from the basic setting, still doesn't work. THIS IS WINDOWS FAULT, their market share is going down and they do little trick to make money. I tried to contact support and it says, "charge may apply." ONLY BECAUSE I HAVE OEM in my ****ing product ID.

My hardware is TOTALLY FINE, I believe yours too. WHY I know mine is fine? BECAUSE I USE UBUNTU ON THE SAME DEVICE! Open Source is your friend, you can trust it.

Read other 1 answers
RELEVANCY SCORE 66.4

Hi , lenovo g500 when i press power button stay on lenovo page and not loading windows and also oneky rescue system not working !How can i do to going boot menu ? Thanks.

Read other answers
RELEVANCY SCORE 66.4

I bought my Lenovo G580 more than 3 years ago, and it came with Windows 8.
For a certain reason, my coworker installed on it windows 7.
I tried to restore it to the original image by using the Novo OneKey Rescue button next to the power button... but unfortunately it didn't work... when i press the Novo button, four (4) choices appear on the screen:
- Normal Setup
- BIOS Setup
- Boot Menu
- System Recovery
When i press "System Recovery", windows 7 starts normally without recovering anything...
Is there any way to restore my Laptop to the original factory software???
Thank you in advance...
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 
 

























images.jpg ?12 KB

A:G580 - Lenovo OneKey Rescue button is not working ...

Your One Key Recovery (OKR) button is working, but most likely the recovery partition that contained the necessary files was removed or destroyed during the install of Windows 7.You have a couple of options:1. Contact Lenovo Support by phone, ask if the recovery DVD's are still available and purchase them, it is a reasonable price...2. Purchase the retail DVD of Windows (7, 8.1 or 10) and perform a fresh install.3. Pick a Linux version you like - download and burn to DVD, then install from media.I personally use Windows 10 Pro and Linux Mint (Dual Boot) on my G580 with no hardware issues in either OS... Really like some of the applications that Linux has, and the fact that it is completely free to use.Good luck.CB

Read other 3 answers
RELEVANCY SCORE 66.4

I bought my Lenovo G580 more than 3 years ago, and it came with Windows 8.For a certain reason, my coworker installed on it windows 7.I tried to restore it to the original image by using the Novo OneKey Rescue button next to the power button... but unfortunately it didn't work... when i press the Novo button, four (4) choices appear on the screen:- Normal Setup- BIOS Setup- Boot Menu- System RecoveryWhen i press "System Recovery", windows 7 starts normally without recovering anything...Is there any way to restore my Laptop to the original factory software???Thank you in advance... 

























images.jpg ?12 KB

A:Lenovo OneKey Rescue button is not working (acting...

Your One Key Recovery (OKR) button is working, but most likely the recovery partition that contained the necessary files was removed or destroyed during the install of Windows 7.You have a couple of options:1. Contact Lenovo Support by phone, ask if the recovery DVD's are still available and purchase them, it is a reasonable price...2. Purchase the retail DVD of Windows (7, 8.1 or 10) and perform a fresh install.3. Pick a Linux version you like - download and burn to DVD, then install from media.I personally use Windows 10 Pro and Linux Mint (Dual Boot) on my G580 with no hardware issues in either OS... Really like some of the applications that Linux has, and the fact that it is completely free to use.Good luck.CB

Read other 1 answers
RELEVANCY SCORE 66

dear all i have g570 laptop and unfortunatly i had formate my laptop without taking the windows7 & product key backup and due to this i had installed windows8.1 in laptop. PLEASE any one have the idea how to get back the product code & orignal window 7 back. 

Read other answers
RELEVANCY SCORE 65.6

Hi I have a few questions about Onekey Recovery for my Y510P IdeaPad. Recently my laptop has been getting BSOD upon startup (bad_system_config error), so I downloaded the Windows 10 installation media onto a USB, then booted from USB to re-install Windows 10. However I noticed that my laptop came with a "recovery" drive "PBR_DRV" taking up about 20GB, and I assume this is the OneKey Recovery drive. My laptop originally came with Windows 7, then I upgraded it to 8.1 when the free update came, then finally to Windows 10 in another update. If I use OneKey, would this revert it back to Windows 7, or will it stay on Windows 10?Will using OneKey wipe only C: system partition, or wipe entire HD? All my personal files are on another partition F:, but I forgot to back these up, nor am I handy enough to disassemble the computer, take out HD, connect to another computer and transfer everything over. My computer is unable to boot to login screenWhat's the difference between using OneKey, and simply using default Windows 10 installation media (https://www.microsoft.com/en-ca/software-download/windows10)?Can I delete the other partitions like "LENOVO 25GB Primary"? I have a total of 9 partitions that I see in Windows Setup window... Or do I not have to worry about these for now and can remove later after I can actually get into Windows? Thank you.

Read other answers
RELEVANCY SCORE 65.6

Hello i already downloaded a onekey recovery but my install media was broken, so i tried to install on my yoga 370 thinkpad to download it again, but it says, that ive already have the recovery media downloaded. Can someone help me?

Read other answers
RELEVANCY SCORE 65.6

Hi there! I would lik e to inquire on how can I fix my laptop. I can't connect to the wifi network. Plus I can't upgrade the driver because the driver isn't showing in device manager. Plus, my track pad is also not working. Help please. Thank you in Advance

A:HP STREAM 11 d002tu Wifi Not Working. Windows 8.1 My Wifi ca...

Hi First of all there is an option in Device Manager; VIEW; Show hidden devices  The faint entries are hidden, like my Zyxel G202 because it is disconnected.   Also.... As an adminstrator, in a Command Prompt Window, typegetmacThis will list MAC addresses for those items that are present, and may not be connected.A good number would be 3,1 x Ethernet1 x Wi-Fi1 x Bluetoothand then typeipconfigand in the long list look for named devices have a matching MAC address.Along with Device manager this is a way to determine the number of devices. additionally type netsh wlan show driversnetsh wlan show interfaces and report the results please.



Happy 2 [email protected]

Read other 1 answers
RELEVANCY SCORE 65.2

Hi there,

I'm in desperate need of help - my laptop (lenovo G570) will not stay connected to the wifi at work. It'll connect for 5 minutes, then disconnect & not find the wifi network for about 15 minutes. The thing is, my phone & tablet stay connected permanently. This has been happening since I reinstalled Windows. I've tried switching the router off, unplugging it, and leaving it off for a few minutes, but that doesn't help. I've also been to the Lenovo support page to try find the drivers, but I don't know which ones to use.

A:Wifi drivers for lenovo G570 running Windows 7 Starter 32-bit

Hi ... Welcome to Seven Forums ... Have you Installed any Drivers from the Lenovo Website ? ...

Have you ran Windows Updates recently ? ...
How does your Laptop perform when connected by Lan ? ...

Read other 7 answers
RELEVANCY SCORE 65.2

Hi, I got 2 months ago ideapad 300 with windows 10 and yesterday I  accidantly uninstalled the onekey recovery software from windows and I can't find where can I download it. My software looked exactly like the attached picture.

























okrhomewindow.png ?87 KB

Read other answers
RELEVANCY SCORE 65.2

I entered to Windows Insider, i had log of problems so after a few days i wanted to exit, but i deleted the compilation of Windows public edition, and I couldn't use a bootable USB Device to recovery my Windows , so I decided to use Lenovo Onekey. When It finished, i selected Reboot, but Windows Boot Manager couldn't start. I tried to use a bootable USB Device again, but It didnt start.
 
I have a vídeo but Its too large. When I finish recoverying, It Reboot, then it says Windows Boot Manager, i press Ok, and It says that Windows Boot Manager couldn't load and I need to use a recovery media Tool that i must select in boot Manager. I press Ok And i select the USB, but It says the name of the USB, then it show me the direction of Efi network (IPv4 and IPv6). When I press Ok, It loads again Onekey.
 
I think the problem is the BIOS. I have the version B0cna0ww, but It seems to be compatible with my G50-80 Windows 10 x64.
I need this PC running normal for the tuesday of the Next week.
 
Sorry for my bad english.
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

A:G50-80 - Can't load Windows after using OneKey Recovery

Hi Igmc, 
 
Welcome to the Community Forums.
 
What Windows version came originally with the system?
Any changes in partitions previously?
 
Efi network (IPv4 and IPv6) message is saying that it cannot see a compatible boot device to start so it tries to search on the network. This is either a corrupt/no recognized boot software to load or a bad device/copy.
 
You can try to unplug the charger and remove the battery.
While turned off, press and hold the power button or 12 seconds to drain flea power.
Reseat the battery and charger and turn on the machine using the Novo button (item7 page69).
Access the BIOS set up and load defaults (FN+ F9) then save and exit (FN-F10). check how it goes.
 
Turn off the machine again and remove any attached devices to turn on using the Novo button.
This time, try to relaunch the factory reset using System Recovery > OKR using an initial backup. 
 
If you encounter the same issue on the second OKR attempt then maybe consider clean installation of Windows.
 
Update us how it goes.
 
Regards
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

Read other 1 answers
RELEVANCY SCORE 65.2

I entered to Windows Insider, i had log of problems so after a few days i wanted to exit, but i deleted the compilation of Windows public edition, and I couldn't use a bootable USB Device to recovery my Windows , so I decided to use Lenovo Onekey. When It finished, i selected Reboot, but Windows Boot Manager couldn't start. I tried to use a bootable USB Device again, but It didnt start. I have a vídeo but Its too large. When I finish recoverying, It Reboot, then it says Windows Boot Manager, i press Ok, and It says that Windows Boot Manager couldn't load and I need to use a recovery media Tool that i must select in boot Manager. I press Ok And i select the USB, but It says the name of the USB, then it show me the direction of Efi network (IPv4 and IPv6). When I press Ok, It loads again Onekey. I think the problem is the BIOS. I have the version B0cna0ww, but It seems to be compatible with my G50-80 Windows 10 x64.I need this PC running normal for the tuesday of the Next week. Sorry for my bad english.

Read other answers
RELEVANCY SCORE 64.8

Hi, I recently update my ThinkPad W550s from Win10 Version 1607 to Win10 Version 1703 build 15063.540 (Windows 10 Creators Update).Fingerprint is not working after upgraded. I just get "Your credentials could not be verified". I've tried uninstalling and reinstalling the driver (and I'm on the latest version), removing and re-registering my fingerprint... Has anyone had this problem and managed to fix it? Can you help me?

Read other answers
RELEVANCY SCORE 64.4

ASUS Notebook G60Vx Series

Windows 7 Home Premium 64-bit

Intel(R) WiFi Link 5100 AGN
A few days ago my internet suddenly stopped working. I plugged in the ethernet cord and everything worked fine. Checking the properties in the device manager showed the device was working properly, I also tried resetting it to make sure it was enabled but it did not work.

Upon troubleshooting, the "Windows Network Diagnostic" said the problems was that the Wireless adapter was not turned on. Using the switch on the front of the laptop as well as the function keys does nothing. Usually a graphic pops up showing if the WiFi is on or off, changinging transparent to show the WiFi is disabled. Now when I turn the switch on it always appears transparent, effectively going from off to off

So I know the computer reads both the function keys and the switch on the front but both methods never actually turns the adapter on. I just finished a system restore and nothing has changed

Any help would be greatly appreciated thanks.
 

A:Wifi not working on ASUS laptop, LAN working fine

Maybe the switch or adapter is defective. Some other ideas ...

Do you have an ASUS utility to also turn the wireless on/off? (I have an HP utility on one of my laptops that will individually control the Wi-Fi and Bluetooth if the physical switch is on.)

In Device Manager right click on the adapter - Properties - Advanced tab. Sometimes there is a Property in there that allows turning the adapter on/off.

If the card is easily accessible through a cover on the laptop's bottom remove and carefully and firmly replace the card several times to fix any potential looseness or corrosion problems.
 

Read other 1 answers
RELEVANCY SCORE 64.4

Hi guys! I'm new to this forum but I come here in the hope that you can help me figure out why is it that when I connect my TiVo to my linksys router(configured as a switch), I STOP HAVING WIFI! Don't know why... As soon as I turn the TiVo box off the wifi starts working(as soon as I reboot the router)... The TiVo works perfectly, no breaks and perfectly connected to the network, but that specific router switch where it is connected, stops functioning though wifi(can't even connect!)

The setup I wish to use(and that is currently working) is:

Modem router(Thomson)---through cable to another router(with dhcp and nat disabled)airporttime capsule)--- through cable to another router(linksys) also with dhcp and nat disabled... Everything works when not using the TiVo box...
The only switch that stops working is the linksys(the one to which the tivo is connected)
Help me pleAseeee
(I'm from Portugal-using an internet tv service)
 

Read other answers
RELEVANCY SCORE 63.6

Hello I have an idea pad Z570 with windows 7 64 bit. Recently the thermal management, one key theater, mute and volume dedicated buttons stopped working. I have tried updating from the drivers and software from the drivers page unstalling and reinstaling from the drivers in the webpage and and from lenovo unit D. I do not have a restore point that can be old enough to restore the the system. Do you have any ideas of how can I enable the dedicated buttons again? Thank you very much for your help in advance.  

Read other answers
RELEVANCY SCORE 63.6

I have a Lenovo IdeaPad Z470 that had Windows 7 Home Basic and upgraded itself to Windows 10.When I want to recover to the factory state with OneKey Recovery within Windows 10 the program says that there is an error and recommends reinstalling, but it is useless.If I want to recover externally with the NOVO button it boots with the standard Windows 10 recovery procedure and I can not take it to the original state.Could Windows 10 have changed anything? How do I fix it?Thank you

Read other answers