Over 1 million tech questions and answers.

Front audio connector

Q: Front audio connector

Hello
I have attached an image of my cabinet, i have front usb & two covered hole (selected with red line in the image) besides it. I think they are front audio but it has no wire from inside. please have a look at it & let me know if i can make it a front audio connector.
thanx

RELEVANCY SCORE 200
Preferred Solution: Front audio connector

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Front audio connector

Read other 16 answers
RELEVANCY SCORE 77.6

Hi everyoneWhile I took the front panel off of my case the other day I accidently removed the JAUD1 jumpers....and now my sound doesn't work. I downloaded the specific instruction guide from MSI for my motherboard and here's the section for it:The two right sound in and out cables were still attached, and I got sound out of my right speaker. But then when I connected the rest to what I thought was correct, I got sound out of my left speaker only. EDIT: I tried not attaching any of the cables and then I get no sound.The problem I have with these directions is that the cables are not labeled the same as the diagram. They are as follows:Purple - R INYellow - R OUTBlack - GNDGreen - MIC BIASBlue - L INRed - L OUTBlack - GNDOrange - MIC INCan anyone help with this? I'd love to have both of my speakers playing sound again....

Read other answers
RELEVANCY SCORE 77.6

So I basically have a very odd front panel audio connector setup, very confusing, I've made over 10 thread on different forums and non were able to help me.

I'm using a Gigabyte G31 motherboard GIGABYTE - Motherboard - Socket 775 - GA-G31M-ES2L (rev. 1.x)

Manual page for the motherboard output can be found below the first image

The front panel audio connectors consists of:
Yellow- MIC BIAS
Green - SPKOUT R
Peach - MIC In
Blue - Return L
Black - Ground
White - SPKOUT L
Grey - SPKOUT L

Much Thanks and appreciation to those who read this read

A:Front Panel Audio connector help needed

Your front panel connections aren't odd, but they are old. They are for the AC97 standard.

Set your onbaord audio to AC97 in the BIOS set-up.

The AC97 pinouts are here:

Desktop Boards — Front panel audio header pinouts

1 Mic In
2 Ground
3 Mic Bias
5 Spkout R
9 Spkout L

It looks like the onboard audio doesn't support the Return lines.

There should only be one Spkout L connector. It's the white (not gray) one.

Have you really been trying to figure this out for 5 months? Yikes.

If these connections cause your PC to go up in a fireball, don't blame me.

Read other 1 answers
RELEVANCY SCORE 75.6

HiI am trying to determine which type of 3.5mm audio plug to put into the front panel connector for using headphone with a microphone to do video communications. could be - sleeve, ring and tip (mono sound and microphone)orcould be - sleeve, ring, ring, and tip (stereo sound and microphone) Have read through the manuals and nothing is said about which type to use.

A:Front panel audio connector - what plug type to use for head...

Hi, I can't see your image but probably you can see mine   (a) All standard 3.5mm (stereo) headphones will fit and work.(b) For the second port on the right, all standard 3.5mm headsets will fit and work. Its default is for microphone, all standard 3.5mm mono microphones will fit and work. Note: probably around 95% of 3.5mm headphones and microphones on the market now are normal/standard. Regards.

Read other 1 answers
RELEVANCY SCORE 75.6

I found a lot of people searching for this information... since I was unable to find it, I tested the front panel connectors by myself, and that is what I found:
 
Power front panel (black connector)
 
+----+----+----+----+----+----+----+
| Bk | | | | | | |
+----+----+----+----+----+----+----+
| Yl | | Bk | Gn | Yl | Bk |xxxx|
+----+----+----+----+----+----+----+

+----+----+----+----+----+----+----+
| 1 | 3 | 5 | 7 | 9 | 11 | 13 |
+----+----+----+----+----+----+----+
| 2 | 4 | 6 | 8 | 10 | 12 |xxxx|
+----+----+----+----+----+----+----+

Description

1 Black Disk activiry led ground
2 Yellow Disk activiry led ground
3 Not connected
4 Not connected
5 Not connected
6 Black Power led ground
7 Not connected
8 Yellow Power led signal
9 Not connected
10 Yellow Power switch signal
11 Not connected
12 Black Power switch ground
13 Not connected
14 Locked (no pin)
USB front panel (yellow connector)
 
It's a standard internal USB connector, but with two additional ground wires
 
+----+----+----+----+----+----+
| Bk | Re | Wh | Gn | Bk | |
+----+----+----+----+----+----+
| Bk | Bw | Bl | Yl | Bk |XXXX|
+----+----+----+----+----+----+

+----+----+----+----+----+----+
| 1 | 3 | 5 | 7 | 9 | 11 |
+----+----+----+----+----+----+
| 2 | 4 | 6 | 8 | 10 |XXXX|
+----+----+----+----+----+----+

1 Black Ground
2 Black Ground
3 Red US... Read more

A:ThinkCentre front panel connector (power, audio and USB) pinouts (A60, M58, M71, M91, M92)

OK I am intrigued.  What are you trying to accomplish ... a hibrid A60 ?





T23: 2647-8RU, Ubuntu 12.04 LTSA61E: 6418-12U, W7/Pro 64X200: 7454-CTO, W7/Pro 32

Read other 9 answers
RELEVANCY SCORE 74.8

I found a lot of people searching for this information... since I was unable to find it, I tested the front panel connectors by myself, and that is what I found:
 
Power front panel (black connector)
 
+----+----+----+----+----+----+----+
| Bk | | | | | | |
+----+----+----+----+----+----+----+
| Yl | | Bk | Gn | Yl | Bk |xxxx|
+----+----+----+----+----+----+----+

+----+----+----+----+----+----+----+
| 1 | 3 | 5 | 7 | 9 | 11 | 13 |
+----+----+----+----+----+----+----+
| 2 | 4 | 6 | 8 | 10 | 12 |xxxx|
+----+----+----+----+----+----+----+

Description

1 Black Disk activiry led ground
2 Yellow Disk activiry led ground
3 Not connected
4 Not connected
5 Not connected
6 Black Power led ground
7 Not connected
8 Yellow Power led signal
9 Not connected
10 Yellow Power switch signal
11 Not connected
12 Black Power switch ground
13 Not connected
14 Locked (no pin)
USB front panel (yellow connector)
 
It's a standard internal USB connector, but with two additional ground wires
 
+----+----+----+----+----+----+
| Bk | Re | Wh | Gn | Bk | |
+----+----+----+----+----+----+
| Bk | Bw | Bl | Yl | Bk |XXXX|
+----+----+----+----+----+----+

+----+----+----+----+----+----+
| 1 | 3 | 5 | 7 | 9 | 11 |
+----+----+----+----+----+----+
| 2 | 4 | 6 | 8 | 10 |XXXX|
+----+----+----+----+----+----+

1 Black Ground
2 Black Ground
3 Red US... Read more

A:ThinkCentre front panel connector (power, audio & USB) pinouts (A55, M58, M71e, M73, M91, M92, M93)

OK I am intrigued.  What are you trying to accomplish ... a hibrid A60 ?





T23: 2647-8RU, Ubuntu 12.04 LTSA61E: 6418-12U, W7/Pro 64X200: 7454-CTO, W7/Pro 32

Read other 9 answers
RELEVANCY SCORE 74

I found a lot of people searching for this information... since I was unable to find it, I tested the front panel connectors by myself, and that is what I found:
 
Power front panel (black connector)
 
+----+----+----+----+----+----+----+
| Bk | | | | | | |
+----+----+----+----+----+----+----+
| Yl | | Bk | Gn | Yl | Bk |xxxx|
+----+----+----+----+----+----+----+

+----+----+----+----+----+----+----+
| 1 | 3 | 5 | 7 | 9 | 11 | 13 |
+----+----+----+----+----+----+----+
| 2 | 4 | 6 | 8 | 10 | 12 |xxxx|
+----+----+----+----+----+----+----+

Description

1 Black Disk activiry led ground
2 Yellow Disk activiry led ground
3 Not connected
4 Not connected
5 Not connected
6 Black Power led ground
7 Not connected
8 Yellow Power led signal
9 Not connected
10 Yellow Power switch signal
11 Not connected
12 Black Power switch ground
13 Not connected
14 Locked (no pin)
USB front panel (yellow connector)
 
It's a standard internal USB connector, but with two additional ground wires
 
+----+----+----+----+----+----+
| Bk | Re | Wh | Gn | Bk | |
+----+----+----+----+----+----+
| Bk | Bw | Bl | Yl | Bk |XXXX|
+----+----+----+----+----+----+

+----+----+----+----+----+----+
| 1 | 3 | 5 | 7 | 9 | 11 |
+----+----+----+----+----+----+
| 2 | 4 | 6 | 8 | 10 |XXXX|
+----+----+----+----+----+----+

1 Black Ground
2 Black Ground
3 Red US... Read more

A:ThinkCentre front panel connector (power, audio & USB) pinout recase (M58, M71e, M73, M91, M92, M93)

OK I am intrigued.  What are you trying to accomplish ... a hibrid A60 ?





T23: 2647-8RU, Ubuntu 12.04 LTSA61E: 6418-12U, W7/Pro 64X200: 7454-CTO, W7/Pro 32

Read other 9 answers
RELEVANCY SCORE 60.8

How to connect usb front connector on the Mother Board, have +vcc, +d,
-d, and ground.

Thanks!!
 

A:front usb connector

This would depend on your motherboard, if you dont have the manual, download it from the mfg web site, and it should tell you how to connect them.

Here's a pretty good tutorial I found that explains it. It's probably not exactly as your setup but it should be close enough for you to get a good idea of what to do. I think you are probably interested in the "Front USB via a Port to Header connection" section.

Good luck.
 

Read other 1 answers
RELEVANCY SCORE 60.4

I have just changed my system from a large case to a matx case, but used all the part except the mainboard. Changed from a Asus P6T Deluxe to a Asus Rampage Gene II.

Now I thought I might have to reinstall windows, but as luck would have it, it booted straight into windows with no other problem except I had to register windows.

It was only when I tried plugging in a usb memory stick into the front of the case that I got a bsod. If I plug it into one of the back usb ports it works. So I checked to see if the cable was attached correctly on the internal header and again it was.

So could this be down to windows or a hardware problem?

A:Front usb connector problem

It is a hardware problem ! Sometimes the front usb ports does not work properly.

Read other 6 answers
RELEVANCY SCORE 59.6

I'm assuming these are not USB 3.0 ports but what kind of USB bracket plugs would work here?  

Read other answers
RELEVANCY SCORE 59.6

What is the order of connection of the pin numbers for the front panel connector.

Eg: what number pin for the power switch etc.

This is for a E-machine D2685 mother board that i have recently purchased.
 

A:e-machine front panel connector

According to my eMachine files the D2685 has a FIC VC37GV Mainboard and uses a Intel standard 9 pin front panel header.

Attached is a pinout for that header.
 

Read other 1 answers
RELEVANCY SCORE 59.6

Hi Guys:

It's been a while since I've posted a question, however, this one is really bugging me. Recently, I've been putting together a lot of systems that have the 9-pin front-panel connection on the motherboard. The problem for me is that the ACPI/LED has only a
2-pin and most cases come with 3-pin cables. No mater which way I input the 3-pin cable, the front-panel LED light will not come on. Does anybody know what I'm referring? If you can Be of assistance, please give me some input.

Thanks.
 

A:Motherboard 9-Pin Front-Panel Connector

If the motherboard requires a 2 pin connector and the case manufacturer supplies a 3 pin connector just take the pins out of the connector and place them next to one another in the connector. There is a little tab on the connector you can lift up and slide the pin out. It's hard to explain here, but once you look at it closely you will see what I mean.
 

Read other 2 answers
RELEVANCY SCORE 59.6

My motherboard is a model Ms-6330 Ver: 2.1 (Microstar) but it also has the gateway part number 2512595. I am currently relocating this motherboard to a brand new case that I just bought and I ran into a problem. The front panel connectors (power switch, led, hdd led, etc) go onto the motherboard in a certain area where there are 15 pins. Unfortunately I have no idea which connectors connect to which pins. Can someone help me? (Maybe someone with the same motherboard/problem). All I need is a way to identify the pins and make sure I don't like accidently fry my motherboard. Thanks a lot! -Andrew C.
 

A:Front Panel Connector on Mobo

Hi,
For starters, have you checked your manual? Also, look on the m/b...in really tiny abbreviated letters you should be able to see where these go (you may see "pw switch"...."HDD ACT"........i know when i was installing my connectors, i got most of them wrong..but dont worry..no frying of the motherboard.....if the connector is in the right place but no light from the LED..try reversing the cable........the easiest cables to place are the pw switch and the reset..as you can test these easily....good luck
 

Read other 3 answers
RELEVANCY SCORE 59.6

I have the mothermoard that comes with the TinkCentre E93 Desktop and I have since upgraded my computer case to something bigger and better looking. I managed to get everything connected besides the front panel connectors which are very important. The ThinkCentre motherboard is a bit weird in its layout and the ThinkCentre case had a single connector that connects into this pinout however, my new case has single connectors instead of a single 13 pin + 1 blank connector. My case has a connector which consists of a total of 9 pins.It would've been simple if the board had a marking indicating what each pinout is for and which is positive and negative but unfortunately there isn't any of  that. At the moment I can't seem to find any information at all with regard to how I should connect this. I would like to get opinions with regards to which pin goes where. This is the full specs of the desktop  

Read other answers
RELEVANCY SCORE 59.6

I just put in a Soyo P4I865PE Plus Dragon 2 into a POWMAX case. I had another Soyo Dragon P4X400-8235 mobo that had fried, and I'm replacing it.
What the mobo connector pins for the front panel require are the HDD LED, ACPI LED, PWRBT, RESET, POWER LED, KEY LOCK, SPEAKER.

My case has the SPEAKER, THE RESET, and the HDD LED, plus a POWER SW, and
one cable with
mic-bias
spkout r
spkout l
Return R
Return L

and 2 cables each with
+vcc
+D
-D
grounds.

So I have the SPEAKER, THE HDD LED and the RESET pins connected.

Right now I'm not getting any power. I suspect that it's because the POWER LED hasn't been hooked up. I don't know if hooking the POWER SW to the POWER LED will do any good--or any harm. Any suggestions, or do I need a different case?

Thanks for any suggestions, tips, or answers.
 

A:Front Panel Connector Pins

Read other 11 answers
RELEVANCY SCORE 59.6

msi ms-7548

Motherboard Specifications, MSI MS-7548 (Aspen) | HP? Support

this is a cable i have

plugging in for a test wont short the board?
I am interested if you can have front audio and spdiff output sound.

HP says ---> One 9-pin audio header for headphone-out and microphone-in (yellow, Vista capable, requires matching front audio jack module)

also HP says ---> "Supports one S/PDIF digital connection"
the board has an internal and external spdif, so what is HP saying?






Quote:
Integrated Realtek ALC888S Audio
*Integrated audio is not available if a sound card is installed.
Audio CODEC: Realtek ALC888S
High Definition 8 channel audio
Supports one S/PDIF digital connection


shows the external spdif #2 rca jack which I use hooked up to a sony receiver.

A:AC 97 front audio cables on this mb front audio? msi ms-7548

An AC97 connection will work in place of an HD Audio connection to the motherboard sound connection. The AC 97 doesn't support some jack sensing that the HD Audio does.

It should work OK to test if you can get front panel audio and S/PDIF at the same time.

Read other 8 answers
RELEVANCY SCORE 58.8

Pavilion 500-205t originally came with Win 7 64 bit home,  upgraded last year to Win 10 anniversary edition 64 bit. Ser # 2MD4060X7W.  I am having trouble with the SS USB connectors on the Front of my Pavilion 500-205t.  I have to wiggle the flash drive or phone connector to get the computer to recognize what is attached and it frequently cuts in and out when in use.  The flash drive and phone connector work perfectly on my other HP Desktop. I have checked the wires and found that it is wired directly in the back of the connector and it attaches to the circuit board. I beleive the connectors have been damaged. Is a replacement part available, and if so:    1 . What is the part number    2. Where can I get it    3. How much does it cost. Thank You

A:Need replacement USB connector assembly for front of Pavili...

@blpen,Here is an example of the part, price, and part number.another

Read other 1 answers
RELEVANCY SCORE 58.8

I am attempting to transfer the motherboard of my h50-50 to a different case.  I am doing this in order to make room for a much larger video card and psu that simply will not fit in the Lenovo case.  I have run into a bit of difficulty with the 'Front panel connector'.  If you look in the 'Lenovo H50 SeriesHardware Maintenance Manual' it is on page 28 (Lenovo H50-50).  I have been trying to find the specs on what each pin is for but have been unable to find such information.  Could someone please direct me to where I can find such information or could you please provide me with the details?  Specifically I am looking for the power switch pin(s), hdd activity pin(s) etc. thanks

A:H50-50 motherboard Front panel connector pin layout

Welcome to the Lenovo Community !
 
There is no documentation that I am aware of that show the pinouts of the various connectors on your motherboard.  I would just use an Ohm meter on your old H50-50 case and trace wires on the old front panel plug.  Once you know how the old plug was configured you will know the pin assignments on the motherboard. 

Read other 2 answers
RELEVANCY SCORE 58.8

Hello! Recently, I transferred my Dell Motherboard (From an Inspiron 560) to a new Rosewill Challenger-S case. All of that went fine and dandy but now I'm facing another problem: I don't quite know where to plug up the cables from the case's front panel (power switch, reset switch, HDD LED). I found a port on my motherboard labeled "Front Panel" which matches the ports, but one is missing like normal front panel connectors, and the cables only take up 6 out of the 9 pins. So the real question is, where do you plug up the cables, or do you even put them in that spot?


Sorry if that sounded really nooby,
JaxDrumm

A:Help with Front Panel/Power Button Connector

Take a close up picture of your motherboard and post it so we can see it. please.

Read other 1 answers
RELEVANCY SCORE 58.4

Motherboard Front Panel connectors Zeus 60 R1 07G Samsung.
Pls send a picture of the panel or tell me which color wires to which one

Power button , HDD , LED Display





 

Read other answers
RELEVANCY SCORE 58.4

I need the Layup front panel connector HP Pavilion P7-1207c desktop pc

Read other answers
RELEVANCY SCORE 58.4

I'm looking at the layout of this connector

Read other answers
RELEVANCY SCORE 58.4

My motherboard USB connector is not compatible with my case front panel USB plugs. The USB connector on my motherboard (NetVista A22p 2292) is for one 10 (two rows) pin connector. The plugs on the tower (A-Top XBlade Black/Silver Ultimate Gaming Machine With 450W PSU & Side window, Model "AT859A-BK") front USB are two separate 4 pin USB plugs (They are VCC, USB1-, USB2+, GND pins w/GRN wire). What can I get or do to make them compatible? Thanks.

A:USB connector not compatible with case front panel USB plugs

See if this helps..not exactly sure if it will:http://www.ramelectronics.net/html/usb_adapter.html

Read other 1 answers
RELEVANCY SCORE 58.4

I recently tried to upgrade my mother board in my pc. The factory motherboard has a 14 pin front panel connector and the new motherboard has a 10 pin front panel connector. I had the bright idea of tinkering with the wires and rearranging them to fit the 10 pin input. I am currently trying to put all the original parts back together and the wires are still set up for the 10 pin connector and not the 14. Could anyone help me figure out which postions to put the wires in on the connector?


























IMG_4343.JPG ?1633 KB

A:Lenovo IdeaCentre K220 Front Panel Connector

Picture of the wires that go into the connector


























IMG_4345.JPG ?988 KB

Read other 1 answers
RELEVANCY SCORE 58.4

Hi, I just purchased a Gigabyte UD3R motherboard. My computer case is at least 6 years old (don't know make) and many of the connectors don't match description to motherboard.

Cables for Audio:

RETURN L (Blue)

RETURN R (White)

SPKOUT L (White)

SPKOUT R (Green)

GROUND (Black)

MIC BIAS (Yellow)

MIC-IN (Pink)
My case doesn't provide an HD audio module so I need to set it up for AC'97 functionality. The pin set up is as follows
Pin 1 - MIC

Pin 2 - GND

Pin 3 - MIC Power

Pin 4 - NC

Pin 5 - Line Out (R)

Pin 6 - NC

Pin 7 - NC

Pin 8 - No Pin

Pin 9 - Line Out (L)

Pin 10 - NC
Really appreciate the help. Thanks!
 

A:Solved: New Motherboard + Front Panel Connector Confusion

Most probably should work by:
MIC-IN to pin 1,
MIC BIAS to pin 3,
GROUND to pin 2,
SPKOUT R to pin 5,
RETURN R to pin 6,
SPKOUT L to pin 9,
RETURN L to pin 10.

Please don't mark threads solved if they aren't, less people will wander to the thread if it looks like no further help is needed.
 

Read other 1 answers
RELEVANCY SCORE 58.4

I have a p4SD-LE Asus MB (Same as P4G800V retail) That has an undocumented Front Headphone jumper near the black CD-IN connector (behind the PCI slots). I would like to use it to hook up the front pannel headphones but can not find any documentation on it. Anyone have any info?

Thanks in advance
 

A:p4g800-V or p4SD-LE Front Pannel headphone connector

Hello and welcome to Techspot.

I can`t find any info on a jumper either. The only manual I could seem to find was in Japanese lol

All I can find is a aux connector next to the cd-in connector.

Regards Howard :wave: :wave:
 

Read other 1 answers
RELEVANCY SCORE 58.4

Recently Swapped out my old enermax PSU for a new one. Plugged everything back in. I inadvertenly disconnected a a twin wire two prong cable which connects to the hinge of thefront door of the tower. It is tied into the other connectors for the system pannel(20 pin) connector on the motherboard. However i do not know where it plugs in?

I would not normally care but the PC will not power up with the new PSU. All i am getting is the standby power LED on the motherboard to light up. I have connected the two fans to the same cables as the EZ_plug( which i just use a ordinary four prong connector). The DVD and CD-R drives use the same power cable. The HDD i have using a SATA power connector. Finally the floppy drive just uses a standard connector with nothing else on the other 12v connectors. The motherboard uses a ATX connector, EZ_plug and 24 pin connector.
I just realised i connedted the PSU up incorrectly. I used an EZ_plug with the ATX connection which i should not do with a Geforce 7800 GT on Asus A8N-SLI Deluxe(ez-plug should only be used with two cards). I also forgot to connect the six prong connector on the video card. Would this earlier omission on my part have damaged the mobo? I rectified and still no change?
 

A:Alenware Aurora Front door connector/PSU issues

The connector is for LED which can be installed in the door. I twisted ALienware's arm to answer this. On rechecking my system connection panel, i discovered my pwr switch connect was wrongly connected into the wrong slot(my fault)!I installed a new hard drive as well and my system now appears fixed and stable. I am hoping the inital problems with with system resets, usb connections and damaged file segments on HDD were to do with either the PSU or HDD. I hope the mobo is unaffected( i hope so the warranty ends in january). Any suggestions to ascertain if i need to check anything else would be helpful?
 

Read other 1 answers
RELEVANCY SCORE 57.6

I have Workstation xw4600 motherboard E93839 front panel connector is a 18 Pin. I cannot connect the front panel such as power switch button, reset button, HDD LED, and etc. Is there a pinout schematic for this motherboard's front pannel? I have ws ug xw4600 strg 453080-001 screen PDF that is the motherboard. Does not give the 18 Pin conector. Thank you for your time.

A:workstation xw4600 E93839 front panel connector to the mothe...

Above on the left is this specific forum's search box, and if you type in pinout and then hit return you will find what you need.  The HP workstations of this era (xw6400 xw6600 xw4600 etc) used very similar pinouts with slight variations, and there are excellent posts in there where you can see all the variations.   All the important ones will be there for you.  Even the wiring colors have been quite uniform.  Makes sense they would do it that way.

Read other 1 answers
RELEVANCY SCORE 57.6

What is the layout on the motherboard for the front panel LED connectors?  The XPS 9000 manual does not specify that at all.  The motherboard itself is model number 0X501H, as given by CPU-Z.

Is the layout the same as the one listed in this thread below regarding the XPS 8500?

en.community.dell.com/.../19586001

Read other answers
RELEVANCY SCORE 57.6

Hello, I've recently bought an m57p (type) motherboard and I'm trying to install into a new case. But I can't find any instruction or scheme how to connect front panel cables. Can anybody explane how to connect them? I now have 13 pins and I have any ideas how to connet them correctly. Please help me...

A:ThinkCentre M57p (type 9088) front panel connector...

Refer to this thread.   Thx. 
 
ThinkCentre-front-panels-power-audio-and-USB-pinout
 
 

Read other 1 answers
RELEVANCY SCORE 57.6

I need to know about the layout of the io pins.

Read other answers
RELEVANCY SCORE 57.2

Would like to move my Precision T3500 Motherboard to Another box.
The Front Panel connector might be useful, but I have not found
any documentation of this.

Is there a Motherboard manual somewhere, or at least the pin definition of the Front Panel connector?

A:Precision T3500 Motherboard documentation (Front Panel connector spec)

.As with most Dells there is a proprietary Front Panel Board and 20 pin or more ribbon cable.

Dell Precision WorkStation T3500 I/O Panel Assembly with USB Audio I/O Control Panel, 29" Internal Audio Cable D/PN X389H, Front Panel Cable D/PN JN454, and Mounting Bracket, Dell M884G, MC532.
http://www.txcesssurplus.com/servlet/the-8929/Dell-M884G-Precision-T3500/Detail

 

Read other 18 answers
RELEVANCY SCORE 56

When I installed a new 2.5 SATA disk in my Optiplex 5040 SFF, the front USB 2 connector with PowerShare stopped working.
When I uninstalled the disk, the front USB 2 connector with PowerShared started to work again.
Because the power supply just have one sata power-cord I used a splitter to supply the two disks with power.
According to the specifications it should be possible to use to hard disks in the Optiplex 5040 SFF.  I have just not been able to figure out how :-)
I have not been able to find a reason for this, can someplease help me :-)
/Thomas

Read other answers
RELEVANCY SCORE 53.2

My audio rear outs used to work, but even so, i was primarily using hdmi out from my video card. I was also diagnosing BSODs at the time and sent my mobo back to asus for an rma. When it got back, I placed it in a different case and attached the font panel audio.

Due to a new living circumstance, I decided to switch back to the normal audio out, as my hdmi sound is awful on my new monitor. Problem is, now i find that the onboard audio does not work.

I have tried uninstalling/reinstalling and updating drivers, I have disabled all other drivers in the device manager, I have disconnected the front panel entirely. Nothing seems to re-enable my back panel.

Everything seems like in this thread Just got done building a new computer but... - techPowerUp! Forums
except my audio interface is ASUS, not MSI, and does not allow for front panel detection. (their solution was to "disable front panel jack detection" but this interface does not allow for this)

See the attached screenshots for interface.
Screenshot #1: As you can see, this is all the advanced settings allow. Also note that the bottom jacks are disabled, and does not see the speakers at all, even though they are plugged in.

Screenshot #2: This is with the HD settings enabled.

Screenshot #3: As you can see, there are no devices shown while HD audio is enabled, and the sound device manager does not see the speakers at all.

Screenshot #4: When I change to AC97, the computer sees the front panel, ev... Read more

A:Asus onboard audio no longer working since enabling front panel audio.

Have you tried system restore, or tried reinstalling the software/driver etc?

Read other 4 answers
RELEVANCY SCORE 53.2

My front USB slots work and every connector on the rear works fine yet when
i plug headphones into the front audio jack and nothing is detected.

My Bios are updated to the latest version, i have also tried switching to AC97 but makes no difference. Swapping between HDMI and s/pdif doesn't also does nothing.

The case is a fairly cheap case being a SHAW GT-M2 although it is new.

I have a dual boot of Windows 7 and OSX Lion the front doesn't work with either.

All drivers are up to date with no yellow ! in device manager

A:No front Panel audio detected but Rear Audio works on Asus P8H 61-M LX

Check to make sure that the front panel audio cable is actually plugged into the audio header on the motherboard. If the motherboard has HD audio and the front panel has a plug marked HD-Audio, then plug that into the motherboard. Make sure that it is correctly lined up, otherwise the front panel won't work correctly.

Read other 9 answers
RELEVANCY SCORE 52.4

Hi all,

I'd be grateful for any advice to my problem....

Last month I bought a new PC, a Dell XPS 8500 with an Intel Core i7-3770 processor. The PC has onboard audio (Realtek High Definition Audio).

I didn't buy new speakers as I have a perfectly usable set of Creative 6.1 speakers.

My problem is that although my computer plays Windows event sounds through all the speakers, applications such as iTunes only emit sound through the front pair.

I have googled the problem and as a result have configured the Realtek to use 7.1 audio but without the side pair.

Also, I have disabled the Realtek driver and have reloaded by asking Windows to select the best available.

But still the problem persists.

Any ideas?

Thanks in advance,

dagi

A:No audio except front speakers (Dell, Realtek Audio)

First, for proper operation you must use the Dell supplied sound driver. Non-Dell will either not work or install or will not work properly, and that includes the basic function Windows installed HD Audio Codec.

6.1 is an oddball speaker configuration for current technology systems, its either 2.1, 5.1 or 7.1.

I used to do a lot of support on the Dell users forum (community) and recall that certain applications will only play audio through "stereo" speakers only. My experience on the Dell forum (I had over 37,000 posts and am still registered) also is the reason I note the Dell supplied sound driver.

You could also post on the Dell community Desktop hardware section and one of the user experts there may have more suggestions.

Desktop - Dell Community

Read other 1 answers
RELEVANCY SCORE 52.4

(Not sure if I am posting in the right place, move me if necessary)
 
Hello BleepingComputer
 
I just upgraded my computer a few days ago, and I am having problems with the Front Jack Audio/Headphone.
 
Normally, I set my Headphone to run simultaneous with my Speaker with Realtek HD audi/Stereo Nix (Disable Front Jack Detection and vice versa), and I could change the volume on both devices separately.
But since I changed the motherboard, when I have realtek installed, it doesn't have the Headphone setting in Sound/Playback.
The headphone work perfectly, but its linked to the Speaker's volume, which is really annoying.
Also, the Realtek layout changed from the last one I got, and doesn't have the "Disable Front Jack Detection" option.
(Picture: http://i903.photobucket.com/albums/ac232/notyellowasian11/Untitled-1_zps2242cdba.jpg)
 
So far, I have tired..
Installing an older version of Realtek driver;
Changing the audio setting in the BIOs (HD or AC97)
Changing the audio connector on the MOBO (Hd or AC97)
Tried multiple compinations with Realtek HD audio manager settings.
Cleaned every plugs/jacks related on that.
 
So far, I couldn't been able to get the Headphone tag at all when Realtek is installed.
 
Thanks !
 
---
Here's my spec:
MOBO: ASUS P8Z77-V LX
Audio: Realtek ALC887 (MOBO default)
CPU: Intel Core i&-3770k 3.50Hz
RAM: 2x 8 GB DDR3 Corsair
GPU: Nvidia GeForce 9800 GTX+ 512 MB
OS : Windows 7 Ultimate 64x
 
Current Audio Driver... Read more

A:Headphone/Front Jack Audio w/ Realtek HD Audio

could try ....
 
Control Pane>View by category>Hardware and Sound>Manage Audio Devices>(select device)>configure
 
It's  a long shot, I know. Just putting it out there.

Read other 2 answers
RELEVANCY SCORE 50

Having upgraded my T7500 to Windows 10 the on-board audio interface no longer works.
I have installed a Soundblaster Audigy FX sound card which is working fine.
What I would like to do is to connect the sound card to the front panel headphone and microphone socket.
At the back of the motherboard (close to the I/O panel is a 10 pin connector labelled FP_Audio. On the sound card is a 10 pin header, which, according to the manual is for connecting to a front panel audio connector. It goes on to state that it is "Intel HD Front Panel Audio standard only. Not compatible with AC97 or Intel-compatible HD Front Panel Audio". The pin connections, according to the Soundblaster manual are:
1 - Analog port 1 Left Channel (microphone)
2 - Ground
3 - Analog port 1 Right Channel (microphone)
4 - Presence# (Active low signal that signals BIOS that an Intel HD Audio dongle is connected to theanalog header. PRESENCE# = 0 when an Intel HD Audio dongle is connected.)
5 Analog port 2 Right channel (headphone)
6 - Sense 1 Return
7 Sense Send (Jack detection sense line from the Intel HD Audio CODEC jack detection resistor network)
8 Key
9 Analog port 2 Left Channel (headphone)
2 Sense 2 Return
Is the T7500 FP_Audio connector compatible with this? If not could someone please provide me with the pin connections to the FP_Audio connector so that I can make up a custom lead to go between the soundblaster board and the front panel.
Thank you

Read other answers
RELEVANCY SCORE 49.6

i have front usb-audio. the headphone and mic jack are not working. the usb works fine. the cable to the audio1 is connected to the motherboard correctly, because there is only one way to connect it. why does the headphone and mic jacks not work? do i have to set something in the bios or through windows,etc. ,etc.?
 

A:front usb-audio(audio/mic not working)

by the way i have integrated sound that works in the back, the case came with the front usb-audio. i built the computer myself.
 

Read other 3 answers
RELEVANCY SCORE 49.2

Hi, I'm new to the Vista forum, but I've searched for a similar problem in other threads to no avail, so here goes, I recently bought an MSI K9A2GM-FIH AMD 780G AM2+ Motherboard and am running Vista Home Premium 32bit os, I need to find a suitable rear panel connector to take the HiDef Audio from the on-board header to my AV amp. There was nothing supplied in the box and the reseller is less than helpful, any ideas where I can get an back panel connector/adapter to give me either co-ax or optical audio out from the MB?

Cheers

AndyGz

A:Rear panel HD Audio connector required

Hi Andy and welcome to the forums

I presume that this is what you mean. Have a look at the following link. Please note that there is a time limit, so you will have to be quick.



MSI Motherboard S/PDIF Digital Coa Audio Out cable - eBay (item 230290271471 end time Sep-18-08 05:13:29 PDT)

Here are some more links.

http://www.yoyotech.co.uk/product_in...31&cPath=62_64
http://www.cclonline.com/product-inf...ufacturer_id=0

Read other 4 answers
RELEVANCY SCORE 49.2

Hi
I recently bought a PCTV Plus (India Version).I wanted to connect the audio through the Internal Connector provided to free the Line In Port.But the online documentation which came with the product is of the PCTV Pro.The PCTV Pro has Vertical Internal audio connector the PCTV Plus has Horizontal audio connector.As the pinout given is of the PCTV Pro I don't know the PCTV Plus's pinout.What is the pinout?
 

A:Internal audio connector in Pinnacle PCTV

Should be a four pin connector, left/ground/ground/right.
 

Read other 2 answers
RELEVANCY SCORE 48.4

Looking at the HMM for my 20KH I am trying to understand what the 'Proximity sensor connector' (p.54 in HMM) is for? It appears to connect the WLAN to the audio card? Why is this?  I am trying to work out if this is the cause of some interference I am experiencing when using the audio jack on this laptop.

Read other answers
RELEVANCY SCORE 48.4

I'm having a problem with the Karajan audio connector on my new DFI NF4 Ultra D mobo.

I just finished putting together my new PC last night, and I've got Windows loaded and all of that good stuff.

But I'm having some audio problems.

My computer is not even recognizing any sort of audio output device.

The motherboard on-board sound piece is actually a separate piece that you connect to the board.

I have it connected well. I went back and made sure it was on good, and I installed the drivers and such, but I still can't seem to figure out what the problem is.

Karajan makes the audio piece, and I did a bit of Googling and I came across a guy on some other forum who was having the same problem, but he never mentioned how or even if he got it working.

Does anybody have any suggestions?
 

A:I'm having a problem with the Karajan audio connector on my new DFI NF4 Ulta D mobo.

From here - http://www.nvnews.net/vbulletin/showthread.php?t=67098

"I had a similar problem (no sound output) and the way I fixed it was that I had the front case jumpers connected incorrectly and when I connected them correctly, it fixed the problem."

"I pulled them all off and swapped the front output from Line_Output_Front on the Karajan module to Line_Output and now everything works"
 

Read other 3 answers
RELEVANCY SCORE 48.4

Just got new case from geeks.com http://www.geeks.com/details.asp?invtid=BLK-PA806-500W

No front audio, i plug in mic, headphones whatever, it doesnt work. Front USB works though. Any ideas?


Intel Pentium D: Dual Core 3.2ghz 800mhz FSB

MSI P6N SLI Platinum
AMI v1.0d bios

500w PSU

3 GB PC-4200 DDR2 533mhz ram

eVGA GeForce 8600 GTS Superclocked: Overclocked at 730mhz core clock

160 GB IDE Maxtor

Windows XP Professional SP3
 

A:No Front Audio

You might have to open the case, and look if the audio ports on the front are connected to the motherboard or not.
 

Read other 4 answers
RELEVANCY SCORE 48.4

Hi.
I need clarification on the following matter.

For a front panel audio solution, to enable HD audio, does this depend on the type of cable that is used or the physical front panel board that it connects to or both?

my question is that i have a asus ta-210 case but am not sure if it supports HD audio for the front panel. It has a 10 pin block connector as well as approx. 7 or 8 individual pins and i have tried the block connector but it doesnt seem to work. my motherboard does support hd audio. therefore, would puchasing and connecting a HD 10 pin front audio cable do the trick or would i need to buy a separate front panel board?

thanks.
 

Read other answers
RELEVANCY SCORE 48

I have a HP Split X2 Model 13-m110dx.  I replaced the LCD/Digitizer assembly, which required I remove all hardware from the display assembly.  My question focuses on the cable that connects the motherboard to the audio/HDMI/Dock board (item 7 on page 17 of http://www.hp.com/ctg/Manual/c03958968.pdf).  The cable of interest is the left one (with a 45 degree bend in it), and how it connects at either end.  A pic is below with the cable (yellow/gold). My question:  Is this a ZIF connector or do I need to lift up the front to release it?  A portion of the gray part of the connector broke off when I tried to lift it, assuming it was a clamp style ribbon cable connector.  The other end of the cable connects to the Motherboard with the same type connector.  I pulled that one out, but it's unclear if that is damaged if I did that wrong. Problem:  The HP Upgrade/Parts manual doesn't define how to disconnect these cables.  After reassembly, the keyboard/dock no longer connects, so what I have now is a standalone tablet w/o any USB ports or keyboard.  I ordered a new audio board in the hopes that resolves the issue. Anyone have any input on this? 

Read other answers