Hi, What dual band wifi cards are approved for the S410p? I tested a random Intel card and got the following message: 104-Unsupported wireless network device detected. System Halted. Is the whitelist available online somewhere? I couldn't find it. Thanks, BM
Go to Solution.
I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system
It's worked out well for many of us in the past.
You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)
Hello and welcome,
The best source I know is the parts list in the Hardware Maintenance Manual - IdeaPad S410p, S410p Touch, S510p, S510p Touch . WLAN cards are on page 80. I don't see any that are dual band from the description - but I haven't checked each one individually.
As you probably know, to pass the BIOS whitelist check a card must be an approved model and have a Lenovo FRU number (firmware modified for Lenovo).
I looked online and I'm still a bit confused whether I should get dual or single band wifi for a laptop that I would like to purchase. Can someone explain to offer a suggestion as to which one is best?
Thank you in advance.
I should get dual or single band wifi for a laptop that I would like to purchaseClick to expand...
do you mean a router
or as part of the laptop spec ?
what router do you have and does it work in dual band simultaneously
the advantage of the 5ghz signal is if you are in a crowded 2.4ghz environment then 5ghz helps avoid interference - also the coverage is wider - although the 5ghz router i have linksys - does not seem to be
if your current router only works in 2.4ghz , then no advantage in the short term
some routers are advertised as dual band - but you have to choose between 2.4 or 5 ghz and so ALL devices will need to support 5ghz
I got a new d-link wireless N router the other day which solved most of my slow internet problems. It is a dual band router and supports 5ghz but my current network card is only 2.4ghz. I'm in an apartment complex so I figure if I run it on the 5ghz band I will get much less interference from other people's wifi. Only problem is I cant really find a dual band pci card??? The only one i've found is a Linksys WMP600N. I was hoping there were some more options out there. Anyone have any suggestions?
Linksys by Cisco Wireless-N PCI Adapter with Dual-Band WMP600N
Sorry, but like you this is the only one that I could find with a PCI interface. They are a reputable manufacturer though.
I currently have a Realtek RTL8188EE 802.11 bgn Wi-Fi Adapter and want to upgrade to a dual band card that supports 5G. Which card will work the best with my computer? I saw a post on your website with this option noted below but want to make sure it works with my computer before I buy it. Below is what I found on one of the forums on your website. However, I am not sure if this will work since it says it will not work with HP and my computer is an HP. Bplus: Intel Network 7260.HMWG WiFi Wireless-AC 7260 H/T Dual Band 2x2 AC+Bluetooth HMCPartner; Bluetooth half Size Module Please know that this card is the universal version, it will work on all the laptops except Thinkpads/ Lenovo and HP For half size mini pci-e slot, Not for IBM Lenovo and HP machines.Wi-Fi Alliance Wi-Fi CERTIFIED* for 802.11ac, Wi-Fi CERTIFIED* a/b/g, Wi-Fi CERTIFIED* n, WMM*, WPA*, WPA2*, and WPS, WPS 2.0, Protected Management Frames, Wi-Fi Direct* for peer to peer device connectionsIEEE WLAN Standard IEEE 802.11abgn, 802.11ac, 802.11d, 802.11e, 802.11i, 802.11h, 802.11wBluetooth Dual Mode Bluetooth* 2.1, 2.1+EDR, 3.0, 3.0+HS, 4.0 (BLE)Authentication WPA and WPA2, 802.1X (EAP-TLS, TTLS, PEAP, LEAP, EAP-FAST), EAP-SIM, EAP-AKA Authentication Protocols PAP, CHAP, TLS, GTC, MS-CHAP*, MS-CHAPv2 Encryption 64-bit and 128-bit WEP, AES-CCMP, TKIPKind regards,Tracy &n... Read more
Hi, What is your HP Envy 17 Laptop ? Please use the following instructions to find out the model/product of your machine: http://support.hp.com/us-en/document/c00033108 From my understanding, the chance to upgrade wifi card for laptops built before mid 2014 is very slim to none, higher for after mid-2014 laptops.Regards.Read other 1 answers
Hi, Is there a dual band wireless adapter I can put in my Pavilion dv6 (product # A3E86AAR#ABA)? The current adapter installed (Qualcomm Atheros AR9485 802.11b|g|n WiFi Adapter) doesn't work very good and is not compatible with 5 GHz. If there is one available how do I make sure I buy the correct/compatible model/part number? Thanks,BradRead other answers
I have a dual band wireless router with 2.4ghz and 5.0ghz using the N standard. I am purchasing a laptop soon. What kind of wireless card will I need to access the the 5.0ghz frequencies? Do I need to have a dual band wireless card or will just a N standard wireless card suffice to see the 5.0 ghz? My work laptop with a "G" wireless card recognizes the 2.4ghz band only, which makes sense.
Read other 6 answers
bought a great computer with 32GB Ram and 2 Terabyte HD but it came with a cheap single band Wireless adapter. Couldn't believe it. My adapter is a RAlink RT3290 802.11 bgn Wi-fi adapter. I want to upgrade it to a compatible dual band AC capable adapter. Anybody have any ideas as to what to get as a Wireless Adapter upgrade to replace my OEM Adapter?Read other answers
Is there a dual band network card suitable for the Probook 450 G2?
Yes it is new enough not to have the whitelist so you can install any wireless card with the right form factor. Here is the Service Manual: Manual See p. 45. HP offered this one which is the top of the line: Intel Dual Band Wireless-AC 7260 802.11 ac 2x2 WiFi + Intel Dual Band Wireless-AC 7260 BT 4.0 combo adapter 756753-001 Available on Amazon.com: https://www.amazon.com/710661-001-Intel-Wireless-ac-7260-Pci-express/dp/B00PDLCFL8/ref=sr_1_1?ie=UTF8&qid=1470826413&sr=8-1&keywords=756753-001 This is a drop-in plug and play replacement. You would want to get the driver files on the hard drive (like maybe the desktop) and have them available before you make the swap to be sure the card will work once you reboot Windows. Pick your OS from the drop-down menu here: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943827&swLangOid=8&swEnvOid=4059 You need the Intel wireless and Intel bluetooth drivers. If you need more help post back. If this is "the Answer" please click "Accept as Solution" to help others find it.Read other 10 answers
My school has now only got 5ghz wireless and now my laptop doesn't see the wireless network as a result. To fix this I need to upgrade my laptops wireless single band WirelessN card to a dual band AC card with bluetooth preferrably. I don't care if it is an original HP card so long as it fits properly and works. My laptop has an I7 quad core in it, 1 gig DDR5 graphics, 4gig RAM, 15.6" screen.Read other answers
I was wondering if it is possible to change my network or WiFi card to a card that supports dual band 2.4 GHz and 5 GHz bands? And if so, what cards will work? Direct link will help. My card is a 1x1 wifi card.
Hi mate i would say go for intel 7260 dual band wireless lan card but do check if it's a full size card or micro but for to make it work you got open the laptop and install the card and install the drivers. If this helped you out please drop a kudos point thanks.
Hey guys and girls. First post in the forum here I'm about to upgrade some parts on my Pav G6 1344sa, namely replace the HDD with a SSD and replace the DVD drive with the HDD, replace the tired keyboard for a new one and upgrade the wifi card for a 5G dual band so i can untilize the speed of my newly installed fibre broadband. After a bit of research i have read there maybe issues getting the Intel AC 7260 card i just ordered to work in this notebook. Can anyone confirm if it will work? I read that some users have used a tweak of covering pin 20 and/or pin 51 with tape to make it compatible, anyone tried this or can explain how this works? Cheers
No it will not work and the covering of the pins is actually a Lenovo trick that I have never seen anybody recommend for an HP. I would think it will not work since the problem is a whitelist. The card has to prove to the BIOS what it is, not hide what it is from the BIOS so stopping the identification data from being read will just cause the wifi card to be rejected by the BIOS. As stated, there is a BIOS whitelist and only the specific HP branded wifi cards originally offered with the laptop will pass and allow the system to boot past BIOS. If you want that list just post back.Read other 9 answers
Ok so i have a shot in the dark question, I am not sure on what parts are avalable for this laptop. I just picked this up on a trade and so far has been a pretty decent little machine. It has stock 2.4ghz wifi, which i know is pretty standard. My question is, is there a different internal wifi card i can replace the stock on with that will give me access to both 2.4 ghz and 5.0 ghz. I have been considering going the usb adapter route for both wifi bands but would like to keep some usb ports avalable without needing to get a small hub. Any info would be Appreciated! Thanks
Hi: Below is the link to the service manual for your notebook. http://h10032.www1.hp.com/ctg/Manual/c03593667 Unfortunately the 3 supported wireless cards listed in chapter 3 are all single band cards. Back when your notebook was produced, HP had a BIOS whitelist which prevents any other wlan card from working other than the ones listed in the service manual.Read other 3 answers
have a centrino 11230bnhmw on my pavilion dv72CE2061PJW want to upgrade to a dual band 3.0/4.0 wifi card, need to replace the failed oneknow what card
Hello @apaege, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I read your post about the WLAN Module, and wanted to assist you! To start, can you provide me with the Product Number of the notebook? Here is a link you can use that will help you find your Model and Product Number:How Do I Find My Model Number or Product Number? Once I have that information, I can provide you with information about the upgrade options. Looking forward to your reply. Have a great dayRead other 1 answers
Will I damage the RF output circuit of a dual band wi-fi router if I attach an antenna that is only designed for the 2.4 gHz? band?
Read other 11 answers
So about 2 months ago, I purchased the AC53 when I moved in to a house share.
We have Virgin Media SuperHub that does both 2.4ghz and 5ghz.
When I installed it, it worked fine and connected excellently to the 5G band, a few days ago however the 5G connection disappeared off my list and now it always connects me to the 2.4ghz band.
Tried resetting my SuperHub and re-installing the drivers and software utility for the AC53 but alas it doesn't show. My phone however can find and connect to the 5G band.
I'm a bit confused as where to go from here!
Any help would be much appreciated!
After re-installing you can't connect at all or just only connect to 2.4?
Can you run ipconfig /all and post back the results.
Click Start, in the search box type cmd, under programs right click on cmd and select "Run as Administrator".
In the command prompt window type ipconfig /all and press enter.
Next right click within the command prompt and select "Select All" press enter.
Paste the results back in this thread.
OK, this is my first time being a part of or using a tech related forum so here it goes:
I'm trying to help save a neighbor some money by fixing their wireless network.
WNDR3700 Dual band Netgear router.
2.4ghz wireless b/g/n with enabled SSID broadcast, channel=auto, mode set to 130Mbps
WPA-TKIP + WPA2-AES. wireless isolation is not enabled.
5Ghz wireless a/n enabled SSID broadcast, channel = 44, Mode is up to 300Mbps
No security encription. (i know...bad, but the lady has lots of kids and family members coming
and going from the house so she doesn't want one encripted). Video network enabled
Both Radio frequencies are enabled, fragment and CTS/RTS set to max
WPS settings = keep existing.
IPv6 not enabled, No repeating is enabled, No guest networks are enabled(however ssid broadcast is enabled for guest profile 1)
The problem, and reason for fixing the problem is that the 2.4 Ghz band light on the router is ON however the SSID is not being seen by any client in the house. the netgear interface says it is on and working. the neighbor needs the 2.4ghz band to work because the printer is wireless and will only recognize 2.4Ghz SSIDs. Also they have older nintendo DS clients they would like to use on the network.
During the day the 5 Ghz band works with very seldom (1-2) disconnects while the 2.4 Ghz band wont be visible to any device. in the evening both bands will come online, and very often will every computer get disconnected from either, the 5Ghz band wi... Read more
Read other 6 answers
My wife got a HP17-g121 laptop and when trying to connect to our 5g dual band router I realized the adapter does not work with 5g and I want to replace it, what make and model will work best in doing so? Also, for some reason the 2.4g band will barely get me 25Mps download speeds where on my HP the 5g gets me closer to the 150Mps I am suppose to be getting, any reason for that?Read other answers
Does anyone know which model & size of WiFi card that used on Inspiron 7459? I purchased this All in one from BH and it only came with one band 2.5Ghz G/N WiFi card and this card getting weak signal lately, so looking for a dual band to replace it.
I'm needing to update my wifi card to a dual band AC & have been unable to find a definitive answer on the compatibilty of Intel cards (specifically the AC-7260) with AMD. Will it work? If not, where can I find the best upgrade options? Is there any type of list of compatible upgrade options anywhere? I have the U-Verse 1G & a Netgear Nighthawk AC 1900 & currenlty max out at around 45mbs down via wireless. I can consistently get around 600-650mbs down via ethernet. I tried the Netgear A6210 usb wifi adapter (dual AC) & it worked for a while (400-450mbs) but now I'm having detection issues with it (apparently pretty common) & I'm tired of having to deal with the dongle anyway. Any help would be greatly appreciatedRead other answers
My Billion BiPAC 7800VDOX Dual Band Wireless VoIP ADSL2+ Router has two bands: 2.4GHz and 5GHz. and is wirelessly connected to my laptop OMEN by HP Laptop PC 17-w007tx. It always shows as connected via 5GHz band only. My laptop also shows 5GHz band only in the list of available networks; 2.4GH does not show up in the list of available networks. It is not so in my other laptop which is also connected to the same router and that laptop shows both the bands in the list of available networks. Thus, I can choose to connect to any of the two bands as per my choice. I have tested the router and it is working perfectly; there is nothing wrong with it.I wonder what can possibly be wrong in my OMEN laptop that it does not show both the bands which it should. At times, when I click to open the list of available networks, 2.4GHz may appear momentarily only and then disappears; thus I can not choose it for connection. I would appreciate any help to resolve this issue so that my OMEN laptop shows both the bands in the list of available networks so as to choose either one for connection.Read other answers
N600 Wireless Dual Band Router WNDR3400.
I am trying to get a signal out in my garage at the opposite end of my router location. I am getting 1 bar and "poor" signal. I downloaded inSSIDer to analyse my signal and I notice that my "Wireless Network (5GHz a/n)" is not broadcasting anything. The checkbox for "Enable SSID Broadcast" is checked.
I have very limited knowledge of this stuff but it seems to me that if it is a dual band that I should be seeing 2 different signals, right?
All I see is this: Wireless Network (2.4GHz b/g/n)
I have attached screenshot of my settings
Can someone help me out with this? Thanks, Joe
Read other 16 answers
Hello, I have a HP Pavilion Model 14-n014nr with Atheros Model AR5B125 and i wanted to upgrade my wifi card to pick up the 5ghz frequency band on my dual band router. Am i able to upgrade to any notebook wifi card that supports AC?Read other answers
Is it possible to upgrade wifi single band card originally installed on my laptop to dual band for picking up 5G. If YES, what the model?Thanks.Read other answers
I would like YOUR Recommendation / Opinion on whether I need single band or dual band.
Currently, I have an 802.11b / g single band.
ISP is cable; high speed, sort of; > 10 MBPS; < 80 MBPS
File & printer sharing
W7, Vista, XP Home & XP Pro
Thanks for your opinion.
Read other 15 answers
Hello, I just got my E560 on 9/27/16. It has windows 7, 64 pro installed. I plugged in the battery and waited an hour or so before turning the system on. Everything booted ok and I entered my hidden router for my wifi. Unfortuanly, it would not connect. I finally dug out an old ethernet cable to hook up and test the system and download some software. I then unhid my router and still was not able to find it. Everyones router in the neigborhood showed up but mine. I call tech support but they claimed that it was my routers software. I have 4 other devices working just fine on the wifi and I even set my printer up for wifi while the router was hidden with no problem. I checked the Lenovo site for updates but the system said everything was up to date. I went to the Intel site and downloaded their current driver for this card. The laptop finally noticed the router while it was unhidden and I again hid the router and rebooted my Laptop. This cured the problem. However, I was displeased with Customer service they tried to tell me it was a problem with my router and not the system and all my drivers shipped from the factory were up to date. I hope this will help anyone who has a similar problem.Read other answers
This is the message I got when installing a XFX GeForce 7600GT XXX graphics card. The error message occured while installing the drivers. It said that this product has not been approved by the Windown logo and they recommended that you return it to the manufacturer for one that was. At that point you could stop the installation or continue at your own risk, so to speak.
Anyhow I continued and everything seems fine. The product is approved by Windows, as is indicated on the box. I haven't had any problems as of yet but was curious if anyone else had encountered this problem.
Read other 8 answers
Can someone explain in layman's terms how a dual band wireless router works? I've spent months reading various articles and websites, and I still just don't get it. I read on one site (can't remember which) that dual band routers require special wireless adapters, but I've never seen a dual band wireless adapter, so I doubt the validity of that. Is a dual band wireless router good for splitting video streaming from regular web surfing?
If someone knows of a good website that offers a clear and accurate explanation, please post a link. Don't post links from random Google searches. I've read most of them. If they helped, I wouldn't be posting here.
Read other 10 answers
HI there - in Australia, looking to purchase a new toshiba settallite laptop with one of the main cons, accoridng to reviews, being that it has on single band wifi as opposed to dual band wifi. Just wondering what the deal with this is and if this is going to be a problem, and what kind, in having only sinlge band wifi?
Read other 8 answers
I recently got a zte g n290 phone,TV phone, but its locked to a particular network/ service provider. I got some info on how to unlock it and did, before I did it said invalid sim but now it goes through and now it searches and then says Emergency / select a network. I've tried other codes and stuff.
If there is any other way that I can do this please inform.
Hi all -
I have a couple of questions if someone has some time to help.
I just purchased a new wireless router (Belkin N600) and it has dual bands 2.4 & 5.
It has the option to name each band's SSID differently. I currently have them set to the same name.
Here are my questions:
1. If the components in my house are set to pick up and log into the SSID by default, will they automatically connect to whichever on is faster or less busy, or will they just log into one?
2. Should I be naming the SSID's differently and specifying which components connect to each one?
Does it make a difference?
For reference, here's what's accessing the router:
1 Logitech Revue
Thoughts? Am I overthinking this? If everything is working fine now, should I just leave it, or can I improve performance somehow?
Surely some of those devices only have 'a' or only have b,g or n adapters, so will only connect to the corresponding network. I have no experience with dual band adapters so I don't know what options you have with those. If I did have dual bands I would probably be naming the networks differently and would tell each device to which network I wanted to connect.
On a G-40 XP SP3 I can't get the Wi-Fi to connect to my Android Hot Spot. It finds the signal, but won't bring up the "Enter Key" screen. Any ideas?Read other answers
I am needing to replace the Realtek wireless card that came in these systems with an Intel Wireless card that will support dual band. Is there a place I can find what I can install in the following models Lenovo L530Lenovo L540
For the L530: https://download.lenovo.com/parts/ThinkPad/l530_fru_list_20130819b.xlsx.pdf
See the ADAPTERS AND SUBCARDS section.
For the L540: https://download.lenovo.com/parts/ThinkPad/l540_fru_bom_20140807.pdf
See the WIRELESS AND SUBCARDS section.
In both cases, you should be able to use the FRU P/Ns to determine your options.
Hope this helps.
It seems like and od question, but those anybody knows if I can connect and USB Hub to the USB port on this router and use lets say a printer and a external HDD at the same time to share on the network. Also I don't have the unit at the moment just planning to get one.
Thanks for the replies.
Check the manual on the D Link site, and I think you'll find that they recommend against using a USB hub. I believe the USB port is meant for a single device.
I have just bought a D-Link DWA-160 A2 network adapter and it is really slow.
I have been using a D-Link DWA-125 N 150 A2 for a while now and it is faster, getting a higher signal.
My new network adapter is suppose to be faster.
The only thing I can think of is that the software coming with the adapter never installed. I get an error: Wireless adapter not found! Please insert the adapter now.
Thing is, the driver is installed and I can surf the internet.
I did some speedtest net tests and I see that my DWA-125 A2 is faster. How can this be possible?
Read other 6 answers
Hello, I currently have a wireless WRT54G router in my home. I have a laptop wirelessly connected, one computer wired, and three more wirelessly connected, all with G adapters ATM. So that is a total of 5 computers wireless and one wired.
I was thinking about as a Christmas present for myself upgrading to the new N networking. However, I would keep all the G adapters, except for one, which I would put into the laptop. Do you think I would see an increase in speed in the N laptop?
Also, I am using Comcast High Speed Internet. Do you think I should get the Dual-Band N Wireless Router, or the Ultra RangePlus Wireless N Router? I am not sure how the 5 gig band works, or what it is exactly, but I thought it would be nice to have for the future? IDK? Also what about the 310N router? Just a thought. Thanks!
What do you think I should do in my situation? Thanks. Please feel free to ask me any questions!
Read other 10 answers
I was thinking of picking up a dual band router during the coming Black Friday sale, but really don't know which to buy or how much I really need to spend.
Right now I'm using a D-Link 655 running on a 25Mpbs connection. I game once in a while, but my main concern is streaming HD video from my main PC to my upstairs PC for my parents. I may also cut Cable at a future date and use the internet for all my TV programing.
I have look at two router so far, a higher end D-Link DIR-880L with up to 600Mbps (2.4GHz) + 1300Mbps (5GHz) speeds and a D-Link DIR-826L with 300Mbps (2.4GHz) + 300Mbps (5GHz).
Is there any benefit of getting a router with a higher transmission rate? since my connection is only 25Mbps or am I just paying extra for a whole bunch of nothing?
I am open to any brand of router, so please suggest ones you had good experiences with. I just looked at the D-Link cause the DIR-655 worked very well.
Don't think you'll get any better internet speeds because even 802.11g is at least twice the speed of your internet connection ( 54Mbps) and 802.11n up to 600 Mbps. So, you know, "The weakest link in a chain" saying ? and "Speed of a convoy is the speed of slowest ship". 5GHz range of frequencies is also more sensitive to interference by walls and other obstructions.Read other 17 answers
Hello, my laptop wifi signal began to fluctuate, even 1m away from router, the signal strength is on the one-point. So I decided to buy a new wifi card intel 7260.But after installing new card and its drivers, LED indication on the key F12 remains orange, unresponsive and i cannot turn it on. Can anyone help?I updated the bios and do the windows update, and using the latest drivers from Intel.Thanks in advance
Hi: You can't use an Intel wireless card in a computer with AMD hardware. That is why it doesn't work. And there is nothing you can do to make it work. Plus your notebook has to have 2 wireless antennas or you can't upgrade the wireless card at all unless you take the whole notebook apart including the display panel to add a second antenna. If your notebook has two antennas, and if you want a dual band wireless N card, you need to get a Broadcom one. Broadcom BCM943228HMB 802.11abgn 2×2 Wi-Fi Adapter, Broadcom Bluetooth 4.0 Adapter -- HP Part # 730668-001Read other 4 answers
Hello, this is my first post and I was hoping someone can help me... I looked on my router and seen that is supports a 5 Ghz connection, but my computer can't find it in the listed networks. I look into it a little bit and find out that my Wi-Fi Adapter does not support it. I was wondering if anyone knew any adapters that would fit my laptop, because I know some computers have different slots for them kind of things or whatever lol. I looked everywhere and I have no clue on how to figure out if there is a dual band adapter that would fit my pc.. :/ The adapter is Realtek RTL8188EE 802.11 b/g/n Wi-Fi Adapter Thanks!!Read other answers
I have a Linksys WRT600N router connected to my XP computer, and a Linksys WMP600N PCI adapter in my Windows 7 computer, and both are enabled with Dual-Band. I can connect to my 2.4GHz and my 5GHz connections just fine on my Windows 7 computer. My question is, can I connect to both at the same time to speed up my connection, and how?
I dont believe you can connect to both at the same time. Your computer should just connect to the best available connection. Why do you ask, are you not getting good connection speed from the wrt600n or just curious.Read other 2 answers
This is my first post here so I'll try doing my best integrating myself here and hope you'll help me to some problems I have to Windows 10 Home edition.
I bought last week a new wonderful laptop Asus ROG G752VY-GC178T. I dislike Asus for not creating drivers for Windows 7 too (kinda not like W10 as much as W7). Anyway, it seems that everything works normally except Wi-Fi!
I got 2 routers, an Asus RT56u and a TP-Link WR841ND.
When I'm connected over wi-fi to the Asus router, I have absolutelly no problem with, but when I'm connecting to TP-Link router, it's start drop the connection after I start download something. The error is about Gateway. It's very strange because the TP-Link is good enough for other devices and I had no problem with.
I did the following:
- Updating wi-fi drivers
- Rollback (to the original ones)
- disabled AV/Firewall
- Reset Wi-fi card many times and router with no clue.
I have no ideea why it's problematic to this router to connect, all other devices has no problem while dowloading at high speed so I guess the problem is from the OS.
PS: The TP-Link router has openWRT firmware and I believe this has nothing to do with my problem like I said above, all other devices works perfectly.
My other thought was that the Intel wi-fi card is incompatible with TP-Link router? or is too good for that kind of router? I doubt that.
Sorry for my english and hope you have a solution for this..
Thanks in advance!
I'm thinking about upgrading my Pavilion (Vista) and HP 15 (Win 10) to wireless network adapters to take advantage of 5ghz channel on my router I'm interested in the Intel® Dual Band Wireless-AC 7260 Prior to installation, I was going to download the Intel drivers but did not find anything specific to either Visat or Windows 10 Som I thought perhaps someone out there has already been down this road and may have advice one way or the other????Read other answers
I have a Lenovo N586 that has the single band wireless N adapter. I attempted to install a new, dual-band adapter, however the computer stopped boot at a black screen that stated my card was not approved. What dual-band WIFI adapters are approved to upgrade this computer with? Thank you.Read other answers