Over 1 million tech questions and answers.

touchpad yoga 260 stopped working

Q: touchpad yoga 260 stopped working

Hello,sorry for my english, I'm french and I have somes difficulties...I bought a few days ago a yoga 260 and time to time the touchpad stops working.I have updated the driversAt times only the touchpad is blocked, or with the keyboard and the touch screen...If you had this problem, I would be happy to know the solutionthank you !

Read other answers
RELEVANCY SCORE 200
Preferred Solution: touchpad yoga 260 stopped working

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 84.4

Hello,sorry for my english, I'm french and I have somes difficulties...I bought a few days ago a yoga 260 and time to time the touchpad stops working.I have updated the driversAt times only the touchpad is blocked, or with the keyboard and the touch screen...If you had this problem, I would be happy to know the solutionthank you !  

Read other answers
RELEVANCY SCORE 68

I have a Yoga 2 Pro, running Windows 10, working fine after upgrade several months ago.Last week noticed intermittent touchpad freezing, then touchpad lock requiring a reboot, then total failure of touchpad.Suspected HW but did all usual things such as reinstalling drivers, cleaning registry. Arrived back from trip and plugged in a USB mouse, but it doesn't work (mouse confirmed working in other laptop). I then opened her up and checked the touchpad cable - re-seated it, but no joy. My questions are.. can a failed touchpad prevent a usb mouse from working ?If not then what can cause all mouse function to not work. In all other respects the latop is working fine. Thanks in advance for any help offered. PS I have not tried a restore to previous state yet - but will do once backup has completed.The only other thing I can think of doing is replacing the touchpad.

Read other answers
RELEVANCY SCORE 67.6

My touchpad stopped working; I rebooted and the touchpad worked until the password eas entered and stopped working when computer unlocked. Used MS mouse to access settings; found the touchpad was turned off! Turned it to on position and it is working fine! How did ths happened?

Read other answers
RELEVANCY SCORE 63.2

I have a Sony Vaio and the touchpad and buttons just stopped working out of nowhere. Any idea what I can do to fix this? Maybe reinstall drivers? But from where? I didn't change anything; it happened totally randomly! Right now I have an external mouse hooked up and it's a pain! Please help.
 

A:Touchpad stopped working!!

Read other 16 answers
RELEVANCY SCORE 63.2

My touchpad stopped working but it shows listed under programs as Snapsis Quick Pad Driver, however when trying to evoke it or uninstall it I get an error message: There was a problem C:\ Program Synaptics\Syn tp|SYNL SDLL.dll the specified module could not be found.  When I try to reinstall it I get a message that I have to uninstall it first to reinstall.  Also when I go to evoke it under Mouse & Touchpad, only the mouse shows up, nothing listed for the touchpad.  When I go into safe mode to see if the touchpad will work in safe mode I get a message that my system can't find some hardware (I assume it means my touchpad??)  I have read that some people said their touchpads stopped working when they went from Windows 8 to 10; however I have been using 10 all along.  So I have run out of options that I know of; can anyone help me get my touchpad working again?  Thanks.

A:Touchpad stopped working

Can I ask,have you done a restart?





I am a very busy person. PleasePlease click ?Accept as Solution" if I solve your Problem

Read other 2 answers
RELEVANCY SCORE 63.2

I bought a Lenovo laptop 6 months ago - 100-15IBD Laptop (ideapad). The touchpad (Elan Smart-Pad) has suddenly stopped working. I can move the cursor but I cannot right click, left click or double click. This has nothing to do with the Fn F6 toggle used to activate and deactivate the touchpad. The touchpad is activated and the device manager says that the device is working properly. I tried updating the driver and got a windows message saying that the best driver for the device is already installed. Please help!

Read other answers
RELEVANCY SCORE 63.2

i have a compaq 1720us with a synaptic touchpad. it has worked great until tonight. something has got changed somehow, somewhere. i have uninstalled and reinstalled the latest drivers, i am using windows xp pro.

the one thing i have noticed is this... if i go into the control panel/system/hardware/device manager/mice or other pointing devices/synaptic touchpad in the general tab where you can normally select "enable" or "disable" this device, it is grayed out, with nothing in the box and i cannot select it at all.

all of the other devices in my pc allow me to select this option. i can plug in my usb mouse and it works just fine. but it's not very useful while traveling wich i do several times a week usually.

any help would be great. i have just spent about two hours on chat with hp/compaq doing all of the stuff they tell me to do, even though i did most of it before i called them.

the touchpad does not work in safe mode, it does not work in selective startup mode using msconfig.

i give up!!! HELP!!!

thanks, jimmy
 

A:touchpad stopped working

Please don't double post.
 

Read other 3 answers
RELEVANCY SCORE 63.2

My HP Pavilion x360 just forced an update a couple days ago and ever since then I can't move my cursor. It shows up on the screen when I first start up my laptop but disappears when I'm forced to use my touchscreen because the cursor doesn't move. This happened when I first got my laptop back in december too but the problem eventually went away on it's own. However, it only took two days, I haven't been able to use the touchpad in about a week. I love the touch screen on my laptop but I would like to be able to use my touchpad too... Someone help me out please!

A:My touchpad stopped working

Hi @The_Fellix,Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts, and other support personnel. I understand you are having an issue with the touchpad. I will be glad to help you.Please post the full product number and operating system in use on your computer. See the following, if you need help with that information.How Do I Find My Model Number or Product Number?Is the Windows Version on My Computer 32-bit or 64-bit?Please get back to me with above information, so I can help you better.

Read other 1 answers
RELEVANCY SCORE 63.2

Hi All,My touchpad no longer works.  It is no longer in the device list via control panel.  I used to run with the touchpad disabled if I had a mouse attached but this option has disappeared as I have no touchpad properties.  Obviously fn+F7 has no effect. Any help most gratefully receieved.Barrie JUST NOTICEDPursuing another similar discussion I saw a reference to HID Driver I2C being a cause of the problem.  This is list as a problem by Device Manager on my machine. The driver is the latest version but the following is listedThis device cannot start. (Code 10)A request for the HID descriptor failed. Can anyone interpret this for me?Barrie  

Read other answers
RELEVANCY SCORE 63.2

Guys please help !!! The touchpad is all worked flawlessly. morning, including laptops and touch not working. Drivers reinstalled, to no avail. There was no update. He made a hard reset - earned !!!. But in the morning and turned on again does not work, and a hard reset does not help. help me please

Read other answers
RELEVANCY SCORE 63.2

My touchpad on ideapad Y700 15-ISK just stopped working. I did a little research in drivers and i found, that there is no driver for touchpad installed. I tried to download new drivers from lenovo site and I used an older driver from C:\Drivers\Touchpad, there is InstNT.exe, which made a driver shows up in device manager, but prompt me to restart the laptop. When I did, the driver got lost again and I had to make the InstNT.exe "instalation" again. Then I tried to update it with a setup.exe in the same synaptics folder and after it, the driver got itself a name for synaptics. So I said to myself, ok after restart now, it will be fine. But it wasn't. Again, the driver is gone.I'm attaching a screenshot for you to see driver being installed, but after restart, it vanished and isn't even showing in unrecognized drivers.In addition, my windows defender warned me about some threats, but I guess it got rid of them, because there were none to be found by me. Just wanted to say it, maybe it could affect my problem.


























Snímek obrazovky (13).png ?1600 KB

Read other answers
RELEVANCY SCORE 63.2

i have a compaq 1720us with a synaptic touchpad. it has worked great until tonight. something has got changed somehow, somewhere. i have uninstalled and reinstalled the latest drivers, i am using windows xp pro.

the one thing i have noticed is this... if i go into the control panel/system/hardware/device manager/mice or other pointing devices/synaptic touchpad in the general tab where you can normally select "enable" or "disable" this device, it is grayed out, with nothing in the box and i cannot select it at all.

all of the other devices in my pc allow me to select this option. i can plug in my usb mouse and it works just fine. but it's not very useful while traveling wich i do several times a week usually.

any help would be great. i have just spent about two hours on chat with hp/compaq doing all of the stuff they tell me to do, even though i did most of it before i called them.

the touchpad does not work in safe mode, it does not work in selective startup mode using msconfig.

i give up!!! HELP!!!

thanks, jimmy
 

A:Touchpad Stopped Working

i downloaded the latest drivers and then deleted from devce manager and let windows find the hardware again and re-installed.
this was after a few days of problems - one of which was that it would only work when i put an external mouse on the PC.
http://forums.techguy.org/t215668.html
 

Read other 2 answers
RELEVANCY SCORE 63.2

Hey everyone this is my first post here,
I'm hoping to get some guidance to resolve and issue I've been having with a laptop I am trying to refurbish. It's a HP Pavillon TX1000 I got from a friend. I put in a new Western Digital scorpio Blue HD and installed Vista Home.
Everything seemed fine but after installing drivers from the HP site and antivirus and malwarebytes, the touchpad stopped working. It had been fine beforehand. I had to plug in a USB mouse which works fine.
So far I've tried these things:
In control panel looking at the mouse settings the Synaptics Touchpad is greyed out and I can't enable or disable it. I can only remove the usb keyboard driver.
I system restored but it hasn't helped.
I download the Synaptics Touchpad driver again and reinstalled it, but it didn't make any difference.
There is a button above the touchpad which is supposed to enable and disable the pad but pressing it makes no difference, the blue light shows it's enabled but it's not.
I am trying a windows reinstall but even during that I am having to use the usb mouse.
Any ideas what I can try next???
The laptop specs are: The laptop specs are: AMD Turion 64 x2 Mobile Technology TL-58 1.90 GHZ
1GB DDR2 RAM
HDD: Western Digital Scorpio Blue 120GB. 5400RPM.
Windows Vista Home Premium 32 bit.
Thanks,
 

Read other answers
RELEVANCY SCORE 63.2

Hi!
2 days ago my touchpad stopped working...
I've tried to reinstall drivers... Still don't workin..

What can possible be wrong??
//Pcenrich
 

A:Touchpad stopped working! =(

Read other 8 answers
RELEVANCY SCORE 63.2

Hello, I've just done a windows update and my touchpad has stopped working.I've tried a system restore before the update but it didn't help.Ive checked the mouse properties but there was nothing listed under devices and i've looked at device manager but there's no category for mouses and other pointing devices.Can anyone help please?Paul

A:touchpad has stopped working

What is the make and model# of your laptop?
Boot into Setup (Bios) go to Integrated Peripherals and look for Touch Pad, if it is Disabled, Enable it.
boot normally, and go to the computer manufacturers Support/Download drivers site and type in your make and model # or your service tag # and download the touchpad driver for your model.

Read other 12 answers
RELEVANCY SCORE 63.2

Hello, i've just done a windows update and my touchpad has stopped working.I've tried doing a system restore before the update but it hasn't helped.I've checked the mouse properties but theres nothing listed under devices and i've looked at device manager but theres no category for mouses and other pointing devices.Can anyone help please?Paul

A:Touchpad stopped working

Please post the computer model next time. Example for touchpad settings/software installed are HP synaptics and a click to enable or disable is found under Mouse settings - Synaptics tab.

Read other 17 answers
RELEVANCY SCORE 62.8

Hi all,  My touchpad is not working and I am at a loss on how to fix it. I have tried the simple F6 trick and that doesn't solve anything and I have updated the synaptics driver, but that didn't fix it either. I tried uninstalling and reinstalling the driver serveral times and that also did not solve the problem. My touchscreen and portable bluetooth mouse work perfectly but the touchpad is totally unresponsive and I am getting very frustrated. Please help! My computer is a yoga 900-13ISK Laptop (ideapad) Windows 10 64-bit. Emily

Read other answers
RELEVANCY SCORE 62.4

I upgraded from Windows 7 to Windows 10 and have not been able to get the scrolling feature on my touchpad working again. The device is listed as Synaptics PS/2 Port TouchPad. I have already downloaded the latest drivers and software, I have tried deleting drivers, and reinstalling drivers. Nothing seems to work.

Read other answers
RELEVANCY SCORE 62.4

I have been running windows 10 for almost a year with no problems to my touchpad. Today it stopped working completely. I went into the device manager and it showed the touchpad still connected. I restarted my computer and now it is as if my touchpad does not exist at all. The drivers for the touchpad are installed and I checked for updates. Could it be that the connection inside the laptop has come loose?

Read other answers
RELEVANCY SCORE 62.4

My Touchpad stopped working. I check under the mouse configuration and it appears as active, and the click buttons are working but not the touch.. 

Read other answers
RELEVANCY SCORE 62.4

My keyboard and touchpad stopped working after I uninstalled my antivirus software and restarted my laptop in my hp pavilion 15ac-179TX. I have an extra mouse which works when connected to the laptop but keyboard and touchpad don't work.

Read other answers
RELEVANCY SCORE 62.4

S7-392I installed the upgrade to the Synaptics driver to no avail.FnT and Alt.7 don't work.Any ideas?










Solved!
Go to Solution.

A:touchpad stopped working after windows 10

Following a thread from earlier Microsoft forums, this worked for me yesterday to restore trackpad function. Go to the Acer driver page for your computer. Download the intel IO chipset drivers for Windows 8.1. Run the setup for the driver in "compatability mode" and install. You will need to restart the computer. The computer will then recognize the trackpad as a valid device. Then download and install the Synaptics (or Elan) driver for Win 10 from the Acer support page and restart. If the trackpad is not immediatley active on the restart, hit Function F7. At least this fixed it for me.












View solution in original post

Read other 10 answers
RELEVANCY SCORE 62.4

My husband's touchpad on his Gateway PC stopped working last night. Therefore Bill is unable to download the Sysinfo utility.

He has Gateway nv77h18u- several years old. Windows 10.

Any suggestions to get touchpad working again?

Thanks!

Tricia
 

Read other answers
RELEVANCY SCORE 62.4

Hello,recently the clicking of my touchpad stopped working . In the beginning, right-clicking was very difficult, now it is also left-clicking and the warranty has expired, which is very annoying.So it is possible to use the mouse and also touch/tip and multitouch, but not the clicking function. Does anyone have any idea how to fix this? So I'm looking for DIY instructions or ideas. Or maybe there is such a problem with the Y50. it is not a software problem. all drivers are up to date.best regards

Read other answers
RELEVANCY SCORE 62.4

Sunday night the Lenovo companion did a few updates including a BIOS update and also an update for the Synaptics, but I can't see it in the Installation History (it doesn't show up). Anyway, after that update, the touchpad doesn't move the mouse anymore. I can still click it, but it doesn't respond to any gestures. I checked in BIOS and it's enabled, I checked all possible settings and it's all enabled and on. Any ideas of what I could try? My laptop type is: 20HR-CT01WW Thank you, Iulian 

Read other answers
RELEVANCY SCORE 62.4

I have a Dell Mini computer with Win 7 Starter.  It's a great little machine but all of a sudden the touchpad stopped working.  The computer was on and when I came back to it the touchpad would not respond. 
 
* I rebooted but that did not resolve my issue. 
 
* I did a hard reboot, unplugging and removing the battery while it was running and restarting but that did not affect my issue.
 
* I tried that Fn + F9 and Fn + F7 but that had no effect.
 
* I scanned with AVG but no virus was found.
 
* I scanned with Malwarebytes but no virus was found.
 
* I ran sfc /scannow but no missing or corrupt system files were found.
 
* I am using a usb mouse.  I located the usb mouse in device manager but the touchpad was not there.  I found the touchpad by clicking "show hidden devices".  The touchpad has a yellow error notice on it.
 
* Windows could not find a better driver.
 
* I uninstalled the touchpad and rebooted and windows reinstalled it but it is still hidden in device manager, still has the same error notice and does not respond.
 
Please help!!!!!!
 
Thanks. 

A:Touchpad stopped working. Any help appreciated.

Does Dell have a separate driver listed at its support site...for the touchpad?
 
If so, did you download such and install it?
 
Do you have your Drivers CD for that system?
 
Louis

Read other 2 answers
RELEVANCY SCORE 62.4

So this laptop is a few years old and i just started using a wireless Logitech mouse.. The problem only started today but for some reason the touchpad has completely stopped working, the left and right click wont work either. I have gone into mouse settings and it's telling me that the touchpad is working properly and nothing has been changed. Please help me

Read other answers
RELEVANCY SCORE 62.4

HP Pavillion x360 (13-s154sa)I turned on my laptop today and both the keyboard and touchpad are not working. How can I resolve this?

Read other answers
RELEVANCY SCORE 62.4

So one day, all of the sudden my laptop's touchpad started acting its own life, it didn't respond my touches as it should've, and this continued few times I used my laptop. Today when I opened the laptop again, the touchpad wasn't working at all. Driver issues? (This has nothing to do with win10, as I downloaded it like half a year ago and this problem started just today)

A:My laptop touchpad stopped working?

Hi @Oodi ,Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts, and other support personnel. I understand you are having an issue with the touchscreen. I will be glad to help you. Step 1: Shutdown your PC.Step 2: Install Windows Updates.Step 3: Perform a touch screen diagnostic test     a.1: Plug the AC Adapter into the computer.     a.2: Press the power button on the computer for 5 seconds.     a.3: Turn on the computer and press the F2 key repeatedly.      a.4: When the HP PC Hardware Diagnostic UEFI screen displays, click Component Tests.      a.5: Click Touchscreeen.      a.6 There are two interactive touch screen tests. Start by clicking Touch Pointer Test.       a.6 Read the on screen instructions, and click Run Once.       a.7:  Touch each block to erase them the test ends when all blocks are erased or after three minutes have passed and results are displayed.     a.8 Click the main menu to return to the UEFI Screen and click the second test.      a.9:  Click Compenent Tests, and then click Touchscreen  again.      a.10 Click Drag and Drop Test.      a.11: Read the on screen instructions, then click Run Once again.  &n... Read more

Read other 1 answers
RELEVANCY SCORE 62.4

S7-392I installed the upgrade to the Synaptics driver to no avail.FnT and Alt.7 don't work.Any ideas?











Solved!
Go to Solution.

A:touchpad stopped working after windows 10

Following a thread from earlier Microsoft forums, this worked for me yesterday to restore trackpad function. Go to the Acer driver page for your computer. Download the intel IO chipset drivers for Windows 8.1. Run the setup for the driver in "compatability mode" and install. You will need to restart the computer. The computer will then recognize the trackpad as a valid device. Then download and install the Synaptics (or Elan) driver for Win 10 from the Acer support page and restart. If the trackpad is not immediatley active on the restart, hit Function F7. At least this fixed it for me.













View solution in original post

Read other 10 answers
RELEVANCY SCORE 62.4

Is there a way we can change the touchpad Reverse scrolling option (Scroll --> Two Finger Scrolling --> Switch Direction) on the X1 Carbon through an automated way. We see that after Windows 10 upgrade, the scroll option on the touchpad has been changed. So doing it manually it works but we want to automate it either through a registry change or some other method. Yes manual changes works perfectly.

Read other answers
RELEVANCY SCORE 62.4

Hello, fellow HP-ers! Hoping someone's expertise can assist me. I decided to clean out my fan by opening up my laptop keyboard. Unfortunately, I must've snagged a power strip or something because suddenly, the mouse stopped working. Does anyone know which power strip is for the mouse? Or if there's something to resecure in there? I've provided a photo for reference. Thanks in advance for the help!  - Mr. Horrible DIY-er

Read other answers
RELEVANCY SCORE 62.4

My touchpad seemed to work when I first started my laptop, but then it stopped as soon as programs started loading. I installed a driver from HP's website, and that didn't fix anything, even after I restarted my laptop. Any advice?

Read other answers
RELEVANCY SCORE 62.4

Hi there, I just received my new Yoga 920. Unfortunately, the right click does not work on the touchpad. I can use the two finger tap on the touchpad to right click, but it doesn't work to just click the bottom right of the touchpad, even though that function is enabled. I can't click on the touchpad to scroll or drag things either. I have updated everything, including drivers, BIOS, Windows, etc. but could use some more ideas, because nothing has helped. Thanks!

Read other answers
RELEVANCY SCORE 62.4

Hey everyone, I have one or really two issues, but they may be connected. I bought the Yoga 900 3 months ago and yesterday I found out that the hotkey for disabling the touchpad worked only oneway meaning I pressed it and the touchpad would disable but I couldn't unlock it again no matter how often I pressed the key again (in combination with fn and also without). I needed to go to standby and then log in again for it to be re-enabled. I updated a hotkey driver, and afterwards when I disabled the touchpad with the hotkey it did still not work. So I went into standby and the whole laptop did not react to me pressing the standby/on switch on the right side for like 5 min. It just stayed off with a black screen. After a while it rebooted completely. Ever since then everything works fine except that the hotkey/f6 doesn't do anything now, not even disabling the touchpad. Can anyone help?

Read other answers
RELEVANCY SCORE 62.4

I upgraded my yoga 2 pro to windows 10 last night.  I went to the support page and downloaded all new drivers for the thing, in particular the synaptics touch pad drivers.  Before I did that, gesture support was severly limited.  Despite the settings saying it was enabled, two finger tap and scrolling was disabled. In any event, after I got the latest drivers, I discovered the following.. (i define a tap as just a forceful touch, where as a click involves pressing the trackpad until it clicks) single finger tapping workssingle finger clicking works.two finger tapping does not worktwo finger clicking does worktwo finger scrolling worksI suspect most two finger gestures work, but I havent tested them all.three finger gestures workfour finger gestures work basically, everything works as the settings dialogs were configured, except two finger tap.  two finger click works just fine.  Ive got the v19.0.9.5 19May15 synptics driver installed.  The config tool to adjust gestures works, and most of its settings are behaving properly. Just two finger tap is failing. Any thoughts?  










Solved!
Go to Solution.

A:Yoga 2 Touchpad in Windows 10 not quite working

Thoughts? Yes! Why did you change that Microsoft? Three fingers "back" is not working any more, instead it's "show tasks". Which I never used before. I cannot change it in the touchpad settings. Again: WHY?

Read other 9 answers
RELEVANCY SCORE 62.4

The right and left click on my Yoga 3 11 touchpad has always been a bit flakey but now it very rarely works at all. Other than that everything else seems to work fine. Scrolling, 2 finger scrolling, tap and double tap are good but the physical clicking makes a sound but doesn't activate. I've done a complete restore to factory Windows 8.1 and just upgraded to Windows 10 Anniversary but still the same problem both for 8.1 and 10. I've looked for a replacement trackpad but can't find one specific to the Yoga 3 11. Does anyone know if another model eg Yoga 2 11 would work or where I could get one?  I also have a Miix 700 which is a tremendous piece of kit but sadly the Yoga 3 11 has been terrible with the CPU throttling and the dodgy trackpad. Any help or advice gratefully accepted. Thanks

Read other answers
RELEVANCY SCORE 62.4

Whenever I flip the screen back to use the P40 as a tablet and then when I flip it back to laptop mode, sometimes the keyboard and mouse will not respond. It's as if the computer doesn't notice that the screen is in laptop mode and does not reactivate the keyboad and touchpad. I have to reset the laptop multiple times or close the lid and open it up again several times to get them to work again. Whenever I restart the computer the keyboard lights will turn on during startup but turn back off whenever I get to the sign in screen. I have found no pattern that consistently works to reactivate the keyboard/touchpad. I am also having an issue that when the computer is in tablet mode, it will not re-orient the screen when I change positions (like from landscape to portrait orientation). I think these issues might be something related to the sensors on  the computer not working properly... Anyone else having this problem? Any known solutions? Thanks for any help. Walter

Read other answers
RELEVANCY SCORE 62.4

Hey, I just purchased a Yoga 710-14IKB , running win10, and everything seemse great, except the the touchpad. It works as a pointing device, but i can do no gestures with it, and sensitivity is extremely slow. Trying to change it in settings failed as the drive dosnt seem to install correctly. Trying to install from latest driver from Lenovo fails with a "No found device" error when starting the install. Trying to install the Synaptic's manually fails as well, and only the default ELAN driver seem to succeed  Any idea what the issue could be ?  

Read other answers
RELEVANCY SCORE 62.4

My Yoga 2 13 had touchpad issues, slowly stopped working. The driver was updated and reinstalled and I tried several other things, but finally reset to Windows 8.1 (I had Windows 10). Even with a complete sysem reset the touchpad doesnt work. It shows up as Lenovo Pointing Device in Device Manager and "show hidden devices." But I receive the Code 24 This device is not present, is not working properly, or does not have all its drivers installed. (Code 24). I am so upset at all the issues I have had with this Yoga, from the bad wifi drivers that kept dropping my wifi and the blue screen of death. Anyone know what I can do to fix this Code 24? I have read so many other entries and am hoping it is not a known hardware issue. 

Read other answers
RELEVANCY SCORE 62.4

I bought the lenova yoga 300 few months back for my daughter and she was using it. Just today I was checking with her and she indicated the left and right buttons in trackpad never worked from day-1. I tried updating drivers, no use. Should I return it? no other options?

Read other answers
RELEVANCY SCORE 62.4

The cursor / touchpad on my yoga 700 has stopped working. The cursor came and went for a couple days but starting this afternoon, has gone full time MIA.  I have tried a bunch of stuff to try to get it to work, listed below. Called lenovo tech support and they wanted me to mail it in for troubleshooting but it is my work computer and I can't have it gone for who knows how long.  Anyone have any other ideas? Thank you very much I have taken the following troubleshooting actions:Restarted multiple timesSwapped between cpunters and tablet modePress f6 to enable/disable TouchPadUpdated Synaptics drivers and restart Deleted driver and reinstalled and restarted Tried the ctrl+alt+del trick to be cursor backTried using TouchPad at login screen, no joy. All of these were unsuccessful.   Please help!!!

Read other answers
RELEVANCY SCORE 62.4

I have a brand new Yoga 300 straight out of the box and the touchpad buttons (right and left click) do not work. If I connect an external mouse it works normally. Is this a common problem or is this device faulty. Thank you in advance for any suggestions.

Read other answers