Over 1 million tech questions and answers.

scsi Host Adapter, conflict

Q: scsi Host Adapter, conflict

I was scanning some documents into Adobe Photoshop two nights ago using a scsi scanner and all was working fine, I installed a USB printer that same night then after testing it and was sure all was working I shutdown, but the next night when I went back into adobe photoshop to continue scanning I just get an error message saying;

"error scanner not ready! there does not seem to be a scanner installed. Please check the scsi connection and the scsi Id number"

The scsi Id is "7" and the scanner is a Blackwidow, I think made by Devcom, the interface used for scanning is called widowview, when I click on acquire scanner the Id changes to"0" and just displays the above error message

I looked in the device manager and an exclamation mark is by the scsi adapter & in the device status there is a message that reads;

"This device is using an interrupt request resource that is in use by another device and cannot be shared.
You must change the conflicting setting or remove the real mode driver causing the conflict (code 30)"

I have tried changing the IRQ which is set at (10) but it wont let me, it says windows will manage it even if I untick use automatic settings

I have looked through some other IRQ's and there are two others set at (10) these are pci audio device & IRQ holder for PCI steering, could that be the conflict?

sorry if this is so long but I am trying to give as much info as I can, plus this is driving me nuts!, I need my scanner!!!

The things I have done so far is to remove the scsi host adapter and reinstall it but no luck, I have checked all the cables and made sure it's plugged in!

The USB printer I installed I borrowed from a friend and had to download the installation disk for it all went well with installation but maybe some of the driver files could have interfered with the scsi adapters?

It is strange as all was working just the other night! but I suppose this will be experiance, I haven't had much with resource conflicts!, help!

Thank you to all that can help and I will try to provide any more information I may have left out but I think I have written a sermon!

The operating system is win98

Nester

RELEVANCY SCORE 200
Preferred Solution: scsi Host Adapter, conflict

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: scsi Host Adapter, conflict

Read other 16 answers
RELEVANCY SCORE 79.6

Installing an Adaptec AHA-150X/1510/152X SCSI Host Adapter and everything is working fine except that everytime I reboot i get the following error: "Host Adapter Diagnostic Error press F1 to boot" right after the memory count. This isn't a major problem but I would like it to boot up without having to press F1. The scanner that uses the card works just great, and there are no other noticeable problems. What am I missing here?
 

A:SCSI Host Adapter problems

Well, that usually means that there is some kind of memory conflict with the card.

Maybe with a sound card or modem you have installed... can you try taking out all cards but video and the SCSI? See if the problem goes away? You don't need to let it go into Windows of course - the error happens long before that.

------------------
Get free stuff and help out a poor computer tech:
LarryCore begs for money
 

Read other 1 answers
RELEVANCY SCORE 78.8

I am using Windows XP. I recently installed a new modem. The modem works beautifully, but I cannot print. When I look at the device manager I notice that the Adaptec AHA-1502 SCSI Host Adapter is using IRQ 10 and I/O Range 0140-0154. THe Generic 56K HCF Data Fax Modem is also using IRQ 10 I/O Range EC00-EC07 and Memory Range E9000000 - E900FFFF. There is a check mark on both property boxes for use automatic settings. No Conflicts are listed in the conflicting device list for the modem, but the conflicting device list for the SCSI host adapter lists these conflicts:
Interrupt Request 10 used by: Generic 56k HCF Data Fax Modem
Intel(r) 82371AB/EB PCI to USB Universal Host Controller.
The Use automatic check box is checked but grayed out in the property box for the modem, but is checked and not grayed out in the property box for the SCSI host adapter. Any suggestions?
 

A:Modem Conflicts with SCSI Host Adapter

Hi,

If it were mine I would go to Start, Control Panel, System, Hardware, Device Manager and delete all references to a modem.

Shut down and move your modem to PCI #3 or the third slot down from the AGP slot)

Boot up and enter BIOS setup menu.....when you get there, then go to the PnP area and DISABLE it if you are using WinXP. (If it were Win98, then you would enable it)

Save and Exit and reboot

When it boots, add the latest and best drivers from the manufacturer's website for the modem.

That should solve your problem.
 

Read other 1 answers
RELEVANCY SCORE 76

Good Morning;

RE: server with an AIC SCSI Host Adapter, on boot goes thru
Channel A ok, then goes to Channel B, makes start-up request of Iomega Jaz IGB, and FAILS...actual chanel B target Id #4 says...."Unexpected scsi command failure ", followed by a bunch of stats (locations). Hardware mgr indicated the Jaz device checks out ok, (Jaz only dvice on B channel but the channel itself indicates its functional)-

Anybody have a suggestion where to begin to look for source of problem? doesnt appear channel corrupt just the jaz device itself, more likely, its scsi channel B settings- any troubleshooting assit would be genuinely apprteciated!

regards
Webz
 

A:[SOLVED] SCSI Host Adapter produces start-up request failure...

Read other 16 answers
RELEVANCY SCORE 61.2

I have a Gateway 6400 933Mhz server with 512MB RAM, a 9.1GB IBM SCSI hard drive and onboard SCSI controller and video adapter. I recently bought a PNY Geforce 4 MX440SE PCI video card. When I insert the card, hook up the monitor to the new card and boot the PC, I see the Gateway logo. But where the LSI Symbios SMDS SCSI BIOS would normally load, I see the message "Please reboot and select proper boot device or insert boot media". As soon as I remove the video card, the machine boots fine again.

I've tried all the available PCI slots. I've upgraded the AMI BIOS. I spoke to Gateway tech support and they said there's nothing special I have to do to disable the onboard video.

It seems to me there's a conflict between the new video card and the existing SCSI controller. Could they be trying to use the same interrupt? If so, how can I change the SCSI interrupt?

Thanks,

Ping
 

A:SCSI PCI Conflict?

There might be a conflict between the new video card and the SCSI controller as you suggested. The only thing I can suggest is to install the new card and use the clear cmos switch to clear the current settings (you may want to copy them down first). The system may reconfigure upon bootup. Check in the bios to see if there is anything there for disabling the onboard video.
 

Read other 3 answers
RELEVANCY SCORE 59.6

Suddenly I've been having a lot of crashes the last few days. I looked at the System Device Manager and there were 2 yellow circles with a black exclamation point in them next to the Iomaga Clik! Parallel Port Interface and also the Iomega Parallel Port Zip Interface. Investigating further, it said that the Clik! had no conflicts, but the Zip said that: This drive is not present or is not working properly or does not have the drivers installed. Code 10. I'm not sure how to proceed. Could this be what's causing the crashes? When I try to reboot, it either shuts off when it gets to loading the desktop or it boots in Safe Mode. What should I do?

BTW- My system's OS is Windows 98se with an 800MHZ Pentium III Processor and 256 MB RAM.
 

A:Iomega Zip causing scsi conflict

I finally gave up and took the system to Mr. FixIt. Between us we figured out it was the SCSI conflict causing the crashes, so he deleted the SCSI from the list in the Device Manager. So far so good, but I'm just waiting for the other shoe to fall. He said that my system didn't even have a SCSI board, so how did the SCSI get in the Device Manager?
 

Read other 2 answers
RELEVANCY SCORE 59.6

After 4 years of working properly, the Adaptec SCSI 1505A card has developed an irq conflict, so my HP 5p scanner does not show up in device manager unless it's in safe mode. The device configurations are as follows:

00: System Timer
01: Standard Keyboard
02: Programmable interrupt controller
03: COM Port 4 (used by digital camera)
04: COM port 1 (don't think it's in use)
05: Modem (on COM port 2)
06: Standard Floppy Disk Controller
07: Printer Port (LPT1)
08: System CMOS/real time clock
09: IRQ Holder for PCI Steering
09: Diamond Stealth 3D 2000 Pro
10: YAMAHA Sound System
11: IRQ Holder for PCI Steering
12: TrackMan 8 (PS/2)
13: Numeric data processor
14: Primary IDE controller
15: Intel PCI Bus Master IDE Controller
15: Secondary IDE controller (dual fifo)

After this fiasco, I also installed the USB drivers, but they don't work either. They were using irq 11 ok for a while. The SCSI device shows up in conflict on irq 9, but according to the SCSI select, should be on 10 or 11.

If anyone can help with this, I'd be most grateful.
 

A:SCSI scanner developed irq conflict

Read other 7 answers
RELEVANCY SCORE 57.2

Every time I start up Windows, it asks me to install some driver for the SCSI/RAID Host Controller. I can't seem to install it, because something fails in the update/install. I'm not even quite sure what that does, but I do know that it's annoying (pops up every time i startup), and that it has to do with my computer not being able to stand by anymore (at least I think)

I don't know very much about this stuff, so if I need to post something else, I will
 

A:SCSI / RAID Host Controller

I bet the install fails because you have no drives connected to the controller. Correct me if i'm wrong. A simple solution would be to disable the controller in the BIOS.
 

Read other 1 answers
RELEVANCY SCORE 57.2

scsimap.sys where is it/ can I get it

does any one know where scsimap.sys is located or I can downloade it?
 

A:SCSI/RAID Host Controller where is it/ can I get it

?????????????????????????????????Where is it????????????????????????????????????????
 

Read other 4 answers
RELEVANCY SCORE 57.2

I get this error when trying to update to Windows 7.

These devices might not work properly after the upgrade. Before upgrading, we recommend updating the drivers for these devices. Cancel the upgrade, open Control Panel and search for "update device drivers", or go to the device manufacturer's website to search for updated drivers.Storage controllers: SCSI/RAID Host Controller

These programs might not work properly after the upgrade. We recommend uninstalling these programs before upgrading. Cancel the upgrade, open Control Panel, and search for "uninstall a program". (Note: Programs marked as * can be safely reinstalled after the upgrade.
SCSI Pass Through Direct

But when I search for updates for the devices but nothing comes up. Can anyone help?

A:SCSI/RAID Host Controller

  
Quote: Originally Posted by Benj


I get this error when trying to update to Windows 7.
...
But when I search for updates for the devices but nothing comes up. Can anyone help?


Please post your system specs under your User Profile - not in this thread, but in your profile.

I will conclude that you are searching for updates using Windows Update. If so, this is not the right place to look.

*Device Manager uses the same files as Windows Update

Read other 9 answers
RELEVANCY SCORE 57.2

Everytime I start my computer, SCSI/RAID Host Controller is trying to install. I press next and suddenly it says that there has been an error. I have no idea what to do. This error appeared first when I re-installed Windows XP.
 

A:SCSI/RAID Host Controller

Often xp can't install raid drivers unless they are integrated into the installation disk or installed with a floppy disk from the prompt F6 while installing windows.So we would need to know is this a laptop or s desktop?is it a desktop with floppy drive(unusual these days)Do you have this driver?.In the device manager is there yellow question or exclamation mark there,if so what against and have you tried reinstalling this driver?
 

Read other 1 answers
RELEVANCY SCORE 57.2

Hi everyone 1st post
I've got a windows xp operating system and a few weeks back my phone wouldn't connect to the pc and I also started getting a warning each startup saying that I need the drivers for my SCSI/HOST controller-I don't think I've got one of those and I can't find any drivers for it anyway.
A bit later I can now connect my phone sometimes if I get lucky after the 5th try of connecting. I also heard that Daemon Tools may have something to do with this but I uninstalled it and the problem was still there
I've got an asus P4S333 motherboard if that helps in any way,
thanks in advance.
 

A:SCSI/HOST Controller problem

No one going to even try and help?
 

Read other 1 answers
RELEVANCY SCORE 57.2

Hi.

First of all, Ive been searching the forums, and all of the suggested solutions doesnt work for me.

I realized that the SCSI/RAID host controller were missing when i installed a program called tuneup utilities.

Ive been having problems with itunes, when transferring songs to my iphone, the computer would suddenly start to lag, stop transffering, and my cpu usage were like 80-90%, and I had to reboot.

I suspect the problem to be related to these SCSI/RAID controllers.

Ive tried updating my bios and this doesnt help either.

Tried troubleshooting through windows, updating drivers through windows, with no luck...

PLEASE help me, this is getting so irritating!

My comp specs:

AMD Phenom 8750 triple core
2 X SATA Hdd
4GB DDR2
Geforce 9800 GT
Motherboard ASUS M2N68

A:Scsi/Raid Host Controller - HELP

  
Quote: Originally Posted by rasmusbrun


Hi.

First of all, Ive been searching the forums, and all of the suggested solutions doesnt work for me.

I realized that the SCSI/RAID host controller were missing when i installed a program called tuneup utilities.

Ive been having problems with itunes, when transferring songs to my iphone, the computer would suddenly start to lag, stop transffering, and my cpu usage were like 80-90%, and I had to reboot.

I suspect the problem to be related to these SCSI/RAID controllers.

Ive tried updating my bios and this doesnt help either.

Tried troubleshooting through windows, updating drivers through windows, with no luck...

PLEASE help me, this is getting so irritating!

My comp specs:

AMD Phenom 8750 triple core
2 X SATA Hdd
4GB DDR2
Geforce 9800 GT
Motherboard ASUS M2N68


Hi and Welcome

First you need to install the raid driver, second trash tuneup utilities, then you may be able to address the itunes issue. Btw what version of itunes are you using? Itunes needs ver 9 or higher to sync correctly
Ken J+

Read other 8 answers
RELEVANCY SCORE 57.2

Hi I was told to uninstall these driver and that i would be told to reinstall it when i rebooted it. i didn't work. So i now don't have it. I don't have any discs to restore it, does anyone know where i can get a download of it
Compaq SR1909UK.
 

A:SCSI/RAID Host Controller

Read other 16 answers
RELEVANCY SCORE 57.2

Im running a pentium 4 PC with Windows XP pro. All has been fine until yesterday where it took a long time to boot. It went through the usual boot sequence and displayed the black xp screen but then the screen goes black and it sits for about a minute before going on to the blue windows logon screen. I checked my device manager and my SCSI/RAID host controller has an exclamation next to it and it says its unrecognised and 'This device cannot start. (Code 10)' I havent installed any new hardware or software recently.

Why has it suddenly done this and how can i fix it?

I tried a system restore but this didnt do anything. Is it broken or will a restore from the recovery cd fix the problem?

Please help

A:SCSI/RAID host controller

Code 10 errors are common. Try uninstalling the device then reboot. When a new device is detected reinstall the latest drivers for it. If you still get a code 10 you may have a hardware problem.

Read other 1 answers
RELEVANCY SCORE 57.2

My internet explorer keeps closing every time I open it. Sometimes it also happens with my mozilla Firefox. Right now i'm on Firefox and it's ok but Internet Explorer is still acting up. So I went into device manager to see if anything was wrong and my SCSI/RAID Host Controller had an X on it. I tried to update it and it says, "An error occurred during the installation of the device. The specified service does not exist as an installed service." Any help will do...




P.S. I have another problem. My Windows Update cannot retrieve updates. When I manually search for updates it doesn't go through. It gives me an error. I think that error is related to the Host Controller.

A:SCSI/RAID Host Controller

To me this looks more like some virus infection. Please follow the HJT - 5 steps against malware link in my sig. Go through the 5 steps and read the instructions carefully. Post your final log in a new thread in the HijackThis section and wait for a security tech to review it. Be patient as they are very busy and it can take several days before you get an answer but as soon as you'll get one you'll have quick feedback.

If you have no RAID array and no SCSI drive the missing driver shouldn't be a problem. Find out what your motherboard brand and model is and reinstall the chipset drivers which you'll find on the manufacturer's website. You can use the posting system specs link in my sig to find some programs that will tell you what your motherboard is.

Read other 10 answers
RELEVANCY SCORE 57.2

I just noticed that in my device manager that SCSI/RAID Host controller was not installed it has a big question mark on my device manager also, CDROM and floppy drive are not functioning though it said that they are already installed and working but still they are not working itried to reinstall them but the problem is still there. I hope someone knows how to silve this problem
thanks.

by the way im using XP
 

A:scsi and raid host controllers

Welcome to TechSpot

I assume you got a newly installed/updated OS on your PC. Did you install the drivers that came with the motherboard?
 

Read other 3 answers
RELEVANCY SCORE 57.2

My MoBo is an Asus P5B, s.775, i965/ICH8, 1066, DDRII800, P5B/6SATA2/GL. Recently my PC started showing SCSI/RAID Host controller as new hardware and said that I needed to install it. I tried to install but it ends with an error: "There was a problem installing this hardware : SCSI/RAID Host Controller , An error occured during the installation of the device, The specified service does not exists as an installed service (code 39)". I really want the device to function properly. Someone please help. Thanks.
 

A:Need help with SCSI/RAID Host controller.

Read other 16 answers
RELEVANCY SCORE 57.2

I recently installed a new router (Actiontec) with the installation disc received from my ISP. Whenever I turn on my PC, or whenever I reconnect the router, Found New Hardware Wizard asks to install a "SCSI/RAID Host Controller". Found New Hardware Wizard can not find the drivers for it from the web or from the disc. Can someone help me install this?

Edit: I'll provide any other info if needed. Thanks.
 

A:SCSI/RAID Host Controller?

We need to know what the make and model of the system and/or the motherboard is to help you find the right driver.
 

Read other 1 answers
RELEVANCY SCORE 57.2

scsi raid host controller

Read other answers
RELEVANCY SCORE 56.8

Hello,
I have a problem with one of my computers, it stopped recognizing my cdrom drive.
i have an intel motherboard DG33BU that have one IDE slot that i connect the cdrom to it as a Master.
the cdrom drive is not recognized even in the BIOS even after i restored it to default settings, in the feild of cd/dvd drive it say no optical drive... i tried changing IDE cable and even changed the cdrom but it still didnt recognized it.
in the device manager i can see that there is one device not detected properly and it says SCSI/RAID Host Controller with a yellow exlamantion mark and in its properties it shows error code 39.
i tried to uninstall and reinstall that device but with no success, i tried to modify the registry according to some recommendation in other forums but it didnt help.
the computer had daemon tools installed on it. and few spyware programs installed on it.
i cant format the HD since i cant reinstall the OS since i dont have a cdrom and i dont think it will help anyway since the BIOS doesnt recognize the CDROM.

I'd appriciate it if someone can suggest a solution for this problem.

Thanks,
Joe
 

Read other answers
RELEVANCY SCORE 56.8

Been trying to setup 2 new sata drives in a raid 0 array using the onboard raid controller on my Chaintech 7njl6 mobo with nforce 2 chipset. Finally got the drives recognized by downloading the samsung utility to scale them back down to 1.5 gb/s, got the array setup but windows does not recognise it.

Windows shows the SCSI/RAID Host Controller as new hardware and cannot find drivers for it, pulling up the found new hardware window on every start. I cannot find drivers for it on my own and the array isn't functioning otherwise. The array does not show up in disk manager or in my computer, but on boot the array is listed as healthy.

Been scouring the internet unable to find any drivers specific to my mobo, nforce 2, or the raid controller that is listed on boot "NVIDIA RAID 4.53 DRIVER".

I've overcome so many roadblocks getting it this far, would hate to have to tack nvidia support at this point.

Could this have something to do with the windows setup thing where it says f6 to load raid drivers? im not trying to put an os on the array, but i tried that anyways and it said i would have to have a specific disk for the device.
 

A:SCSI/RAID Host Controller not functioning

nVidia (and many other) drivers can be auto detected from this post links: http://www.techspot.com/vb/topic117607.html
 

Read other 4 answers
RELEVANCY SCORE 56.8

Hi.. Im having a problem with my hard drive i think, when i boot up it stays on the windows xp loading screen for roughly 2 mins, and when it does boot up, i get the add new hardware box come up asking me to install SCSI/RAID host controller, ive tried clicking next next finish etc, but it cant find anything to install it... my computer has been running slow since ive had this come up, funnily enough it was roughly the same time i installed a new graphics card... its a Radeon 128mb 9600 series, ive also installed a wireless card and a soundblaster live sound card since, i dont know whether or not its anything to do with the new hardware, but i just thought it might be the problem...

Ive looked just about everywhere for the SCSI/RAID Host Controller, but i cant find it anywhere, including the microsoft site.

any help would be greatly appreciated, thanks.
 

A:SCSI/RAID Host Controller Issue...

Read other 14 answers
RELEVANCY SCORE 56.8

Hello all!

sice 1 week ago i bought a "new" mainboard along with a new processor

mainboard type: K8Upgrade-NF3 from ASROCK
Processor type 64 bit AMD sempron 2800+

...i lost my DRIVER CD that came with my mainboard .. so ... i downloaded the drivers from AsRock Web site ... till now .. all good (installed windwos ... drivers .. internet connections .. printers .. everithing ... ! !

SO my problem is :

when i start the computer i have this error ... : NEW SCSI/RAID Host Controller Found !

do u want to install the driver .. i press yes .. and : "There was a problem installing this hardware : SCSI/RAID Host Controller , An error occured during the installation of the device, The specified service does not exists as an installed service "

i don't know exactly what SCSI/RAID Host Controller is .. but .. i know i don't have ANY Raid or SCSI HARDWARE on my computer ! ! !

Can U help please?

P.S. I post the HARDWARE DEVICE MANAGER and the ERROR in this print screen
 

A:SCSI/RAID Host Controller PROBLEM

Read other 7 answers
RELEVANCY SCORE 56.8

hi, i face some problem with my scsi/raid host controller. i dun have this controller but i accidentally install raid controller driver. now i wanted to uninstall this scsi/raid host controller in my device manager but whenever i uninstall it, my computer will fail to boot up. in my device manager, there is a yellow exclamation mark beside the scsi/raid host controller facing code 12 resource problems. if i never uninstall the scsi/raid host controller, my secondary n primary ide channel will face problems too. n i my cd rom disappear. can someone help me with this problem. thank alot
 

A:SCSI/RAID host controller problem

It will all depend on what computer you have????
What scsi card you have????
And what version of windows you are using????

It is not possible to diagnose a fault without at least a little information!!!!
 

Read other 5 answers
RELEVANCY SCORE 56.8

I have been having some trouble with a device in my device manager its labeled scsi/raid host controller sometimes it has a red x or sometimes a yellow !, but i have noticed it because ive been trying to burn some documents on a couple of cds and its not letting me use any programs like imgburn, clonecd, nero, but i dont know if this has anything to do with it or not because dont know what a raid controller is.
I have a HP Compaq nc6000 Notebook PC running on Windows XP Pro (SP3)
Let me know if you need any more info , but if you find me a helpful fix for this could you still explain what this item is and what was wrong in the first place, im kindof curious.
-Tory

A:SCSI/RAID Host Controller problems

This is a SATA controller. Usually for a hard drive or CD/ DVD drive. Try updating the driver by going to your computer manufacturers web site and downloading the driver.Is the burner drive showing up in the Device Manager?

Read other 3 answers
RELEVANCY SCORE 56

I just noticed in device manager that my driver for the SCSI/RAID Host Controller wasn't present. Not sure what it means since I am not using and RAID or SCSI hardware. I tried installing VIA drivers for my mother board which is an ABIT KD7; chekc out my signature for the rest of my specs. That didn't fixc the driver problem. I triedin installing ADAPTEC drivers from their website and no luck that exclamation mark saying there are no drivers present is driving me insane. It was there before and I am not sure why it is still there. All I did was move my net work and sound card to the lowest PCI slot in my tower so my video card gets more air from my fron intake fan at the front of my case. I hope someone knows how I can solve this problem.

THANKS
 

A:SCSI/RAID Host Controller Driver Problem???

Taken from ABIT KD7





RAID 0/1/0+1 (KD7-RAID)
Supports the most advanced ATA133 HDDs with RAID 0/1/0+1 onboard HPT372 RAID controller enables enhanced functionality and HDDs performance without the cost of additional add-on cards.Click to expand...

If you do not use it, it is not necessary to install drivers for it ( you might even be able to deactivate it from the BIOS ).

If you do not feel comfortable with the exclamation point in the Device Manager, install these -> Highpoint HPT372 Drivers v2.34 for 98/ME/NT/2K/XP
 

Read other 10 answers
RELEVANCY SCORE 56

I'm using a new Dell at work (an Optiplex GX280) with Windows XP, and it has recently been popping up with the following error:
"The device driver for the 'SCSI/RAID Host Controller' device is preventing the machine from entering standby. Please close all applications and try again. If the problem persists, you may need to update this driver."

That's the problem.

I've been to the Dell site, but don't see any drivers for SCSI/Raid anywhere on their site (here is where I was looking).

I also opened the Device Manager, and told the SCSI/RAID host controller to update the driver. It looks and looks and looks, but doesn't find anything.

How can I fix this?

Thanks!
 

A:Solved: error about SCSI/RAID Host Controller

Read other 9 answers
RELEVANCY SCORE 56

I have a copy of Windows Vista DC1 but every time I try and install it it asks me to locate the SCSI/RAID Host Controller ... this is not on the disc ... any ideas what to do!?
Matt
 

A:Solved: Can't find SCSI/RAID Host Controller

It sounds like you have a RAID controller on your motherboard. If your hard drive is hooked up to it you'll need to load a driver for it. The motherboard should have come with a CD with drivers on it or you may have to download them. If nothing is hooked up to the RAID controller then you can probably just ignore it.
 

Read other 3 answers
RELEVANCY SCORE 56

Scsi/raid host controller drivers problem
 

A:Facing problem wih Scsi/raid host controller

What are these problems?
 

Read other 1 answers
RELEVANCY SCORE 56

Hi i hope someone can help me, my computer is coming up with the

Found New Hardware Wizard

then it goes on to say about installing scsi/raid host controller but the thing is i dont have a scanner so why is this coming up?

I am using windows xp, pentium 4(3.02ghz), 512 ram(ddr), i have an inno 3d graphics card all my drivers have been installed using the cds provided when i put together the pc, so what is going on, thanks for the help.
 

A:SCSI/RAID controller Host ... i dont have a scanner? HUH?

There is more to SCSI than scanners, actually scanners are the lesser functionality of the SCSI bus. And sometimes some things are called SCSI even when they are not

Do you have a RAID controller. Or a SATA controller? Or did you install some virtual CD software like Alcohol or Daemon Tools?
 

Read other 5 answers
RELEVANCY SCORE 56

Hi I went onto my Device Manager to try and sort out my DVD play Troubles and i came Across 'SCSI/RAID Host Controller' and it had a Yellow '!' over it - it's playing up can anyone tell me what it is? what it does and what i should do please
 

Read other answers
RELEVANCY SCORE 55.6

Every time I install Daemon Tools my pc runs totally slow (need 20 sec to open window), this is happening for all versions that were released in last 4 years, magic iso, power iso and alcohol runs perfect.

I have mb Abit NF7-SL and I have lost original cd, the problem is that on abit web page there is no such model and I cant find original drivers anywhere. Drivers from model NF7-S V2.0 works but lousy. Soundstorm drivers and program are different and volume fluctuates from low to high at times. And I need to have boot diskette for SATA hd after formatting. Im telling this cause I cannot update mb drivers cause there isnt any, I have the newest but they are not originaly for my mb.

Other problem I got is message 'Found New Hardware Wizard' saying I need to install SCSI/RAID Host Controller. I got nvraid_v103.exe from abit web page but nothing changes. And if I run install software automaticly I got this error message "There was a problem installing this hardware: AZQZOBRY IDE Controller".

Graphic drivers also are not from original cd.

my configuration is:
Windows XP sp2
Abit NF7-SL
Athlon XP 2500+
Seagate Barracuda 7200.7 120GB SATA
Sapphire Atlantis Radeon 9600 XP
Leadtek PVR 2000 XP
Linksys Wireless-G PCI 1x

mb is this: http://www.ciao.co.uk/ABIT_NF7_SL__5...#productdetail

Please help me!

A:Daemon Tools and SCSI/RAID Host Controller problem please help

Welcome to TSF....

If you can get on-line with this computer then use Windows Update and go thru Custom search and then find the updates on the left side that should be under hardware or something to that effect you might find the hardware updates for the computer there, if not then find the make and model of the motherboard and go to that manufacturers web site to get the proper drivers needed.

Read other 3 answers
RELEVANCY SCORE 55.6

Before I started on this project all my system worked. I replaced an older Plexwriter with a used Samsung CD r/rw and discovered my Windows XP home edition is giving me an error message about not loading the drivers. I have exhausted all my thoughts and trial and error attempts to resolve this. I am sure it has something to do with the IDE controller configuration, but I can't figure out how to solve it. No replies, I give up!
 

Read other answers
RELEVANCY SCORE 55.6

Let me start by saying I know some basic computer stuff, enough to get me in trouble but not enough to help myself out of a jam, here's how the story goes.

Ok my computer was not being able to connect to the internet. So I called my ISP and they told me to uninstall my Ethernet Gigabit Connector in device manager (why I dont know) so I did, and when I tried to reinstall it, it had a yellow exclamation point on it and so did the SCSI Raid Controller. I have since found a driver to fix the Ethernet part of it but the SCSI Raid controller is still with a yellow exclamation point and everytime I go to reinstall it it says it has encountered an error. I have tried rebooting, going to ASUS website to get a new driver and searching everywhere on the internet...all to no avail.

I go to the cmd prompt and I have no IP address, and when I type in ipconfig/renew I get nothing but timed out as well. This is a second computer I'm using to ask this question on which is connected and working fine once I bypassed the router and went straight to the modem with it. Any help is appreciated...thanks in advance.
 

A:SCSI Raid host controller yellow exclamation point

Read other 16 answers
RELEVANCY SCORE 55.6

My Cd rom drive does not seem to work.
It opens fine but once it is closed my screen goes blank and there is no D drive found in the my computer folder.
In Device manager there is a yellow exclamation mark next to the SCSI/RAID host controller and once looked at states a error message with code 39. The manufacturer is unknown.
I have contacted Fujitsu which asked me to check if the screen goes blank when using the cd drive in BIOS mode, which it doesnt. They then claimed it was a software problem so they could not help me!
My computer and op info is:
System:
fujitsu siemens amilo m1415g
Microsoft Windows XP
Home edition
Version 2002
Service pack 2

Manufacturered and Supported by:
Fujitsu Siemens Computers
Intel (R) Pentium(R) M
processor 1.73GHz
796 MHz, 512 MB of RAM
Please help!!!
Thanks!
 

Read other answers
RELEVANCY SCORE 54.8

Hi All!

I'm new here, so I'm guessing as to which forum this should go in. Please forgive if I've put it in the wrong place!

I'm having some issues with my desktop computer. Over the past few months it's been running slower and slower, especially online and especially when streaming graphics are concerned. Webkinz runs rediculously slow, and movies on youtube are pretty much unwatchable.

There was also this odd problem of the computer not being able to properly boot from "off". It would run through the RAM test and identify the various hardware (disk drives, CD ROM, DVD, etc) and then freeze indicating that I needed to insert a boot disk (or something like that). I'd then give it a CTRL ALT DEL and it would run through the startup just fine. I'm sorry that I can't remember the exact error message, but the problem seems to have disappeared after the below actions were completed.

I started trying to fix things by clearing room on my harddrive. I'm not much of a computer tech, but I figured a fuller harddrive might cause some issues. I got rid of all my music and video files and backed up all my photos and deleted them. I also removed everything "superfluous" that I could find (e.g. RealPlayer, Java, Adobe, etc). There was no effect.

I use an ATI Radeon 9800 video card, so I thought maybe if I reinstalled, or at least updated the drivers, that might help. I use Omega drivers. There was no increase in performance.

It was whi... Read more

A:Really slow working desktop PC. Possible SCSI/RAID host controller problem?

I got the Video card incorrect... it's a 9600, not a 9800.

Anyways, attached are the Everest report, screen shot of the hardware profile and txt files containing some of the error messages. There were a lot more error messages on application events, so I've taken just the most recent.

Sean

Read other 5 answers
RELEVANCY SCORE 54.8

Does anyone know if there is such a device to hook a scsi scanner up to a usb port on a computer?
 

A:Scsi to USB Adapter??

They have them but they are pricey: http://www.mozillaquest.com/Hardware/Belkin/Belkin-SCSI-USB_story01.html http://www.cwol.com/usb/USB-SCSI-adapter-Microtech.htm

They have Tekram Ultra SCSI3 315U cards on Pricewatch for $23 including shipping which would be more than sufficient for most scanners.

What scanner?
 

Read other 3 answers
RELEVANCY SCORE 54.4

I recently installed a scanner to a pc and now I am getting the following message when I try to put the pc in Standby mode:

"The device driver for the 'SCSI/RAID Host Controller' device is preventing the machine from entering Standby. Please close all applications and try again. If the problem persists, you may need to update this driver."

Then when I choose OK, my mouse pointer disappears.

Does anyone know what this means or how to correct it?

TIA
 

A:Scsi/Raid host controller device is preventing the machine from entering Standby

It means that Windows doesn't know how to put your scanner (or more precisely the (virtual) SCSI controller) into standby.

As it says, install the latest drivers for the equipment from the original manufacturer. Also, in Device Manager, check the device properties and see if Windows is allowed to turn it off.
 

Read other 4 answers
RELEVANCY SCORE 54.4

Hi,

just wondered if there is going to be a conflict with the "MPVS Hosts file" I have installed (for ad blocking) and the VPN I'm about to sign up to? I'm looking into signing up to Private Internet Access VPN for 12 months to see if it's effective or not, but I didn't want to run into problems with the hosts file I have altered. Can you set me straight as to whether there will be a problem with this? I'm not that tech savvy but I seem to think that the VPN has something to do with using the host file or DNS????

Thanks
Dengue
 

A:Is VPN going to conflict with MPVS Host file

Read other 7 answers
RELEVANCY SCORE 53.6

hi alli'm looking for driver about LSI adapter ultra 320 scsi 2000 serie in windows server 2012 R2 i can't upgrade from windows server 2008 R2 be for upgrading this driverthank

Read other answers
RELEVANCY SCORE 53.6

Man, I can't find drivers for this anywhere. Microtek acts like they've never heard of it. It's a Microtek parallel to SCSI adapter cable with model#EPPC. Are there any good driver sites besides driverguide.com? Or better yet, does anyone know where to get the drivers for it (win98)?
 

A:Microtek Parallel to SCSI adapter

http://www.support.microtek.com/~admin/scannerframe_windows.html
Don't know if that will help or not.....
 

Read other 1 answers
RELEVANCY SCORE 53.6

Can a LSI Ultra320 SCSI adapter run under Win7? I've got an old Dell Precision 530 with this adapter and 3 ULTRA 320 drives running W2K Pro. Just trying to see what I get away with doing with it. Definitely need to get more RDRAM before I do anything. Pity it's only 32bit with twin Xeon processors...
 

A:Solved: LSI Ultra320 SCSI adapter

Do you have an exact model number? From what I can gather, it's an older model and I don't see any drivers newer then Win2k. So the only real way to know would be to test it. But based on experience with other hardware in Win7, I'd say it's not likely to work.
 

Read other 3 answers
RELEVANCY SCORE 53.6

I own an Adaptec AHA-2940UW SCSI Host Adapter for my Windows 2000 Pro (SP4) system. From the get go the onboard Host Adapter BIOS has never worked, that is, I've never seen the supposed "BIOS Banner" on PC bootup nor has the "CTRL+A" keys have worked. Because of this I've never been able to get my SCSI HDD to work as a boot disk for my OS. Under Windows 2000 Pro the SCSI HDD and Adapter work fine, as well as under real-mode MSDOS when the Adaptec drivers are started. As far as i know my ECS K7S5A mobo has PCI 2.1 compliant slots and are bus mastered. I've even tried the Adapter within another PC (HP Vectra VL800 P4 system) but still no effect.

I've tried flashing the Adapter BIOS when I first purchased the unit 2+ years ago and it worked fine but all subsequent flashing have never worked, perhaps due to the fact that I've always flashed "WITH" the SCSI HDD attached to the adapter (I think this is a no-no?). Attempting to flash now generates the following error message from the "FLASH4.EXE" file:

"No BIOS Detected - BIOS Upgrade Install Not Complete"
Device ID: 8178 | Vendor ID: 9004

From all the information gathered it seems the FLASH4.EXE file, used to flash the BIOS chip, is first checking the BIOS chip contents. I have strong evidence which shows the BIOS chip is currently "blank", wiped clean by an EEPROM clean process. Because there is no data within the BIOS chip the FLASH4.EXE file ... Read more

A:Flashing my SCSI Adapter's BIOS?

Read other 14 answers
RELEVANCY SCORE 53.2

I'm using XP Home, and in the device manager, under "SCSI and RAID controllers", "SCSI/RAID host contoller has an exclamation point. It says that the registry info for this device may be corrupt (code 19). The trouble shooter and Windows Update tell me to check for updates to the driver (which there are none of) or to reinstall the device (do they mean the driver? I dont see a way to reinstall the device. I dont even know what hardware its needed for). When I uninstall the driver and reboot to reinstall it, it tells me it cant start, and needs to start in the last known good configuration, which was before I unistalled the driver.
 

A:[Solved] SCSI/RAID host controller code 19 Registry info damaged, reinstall/update

Read other 10 answers
RELEVANCY SCORE 52.8

Gigabyte GA-6LX7 Mb, 400 MHz celeron, 64 meg ram, 13.6 gig Maxtor ide hard drive, 9 gig Seagate scsi hard drive, win 98 se, DTC 3502A scsi adapter, Toshiba scsi cd-rom.
My scsi cdrom works fine, but. I can look at the scsi hard drive in windows and it says that it is only 19.2 meg, I can't access it in windows or dos. The on-board bios for the adapter doesn't find the hard drive or the cd-rom, but, I can still access and use the cd-rom drive.
Also, with ASPI3520.SYS enabled, the adapter and the primary and secondary ide controllers are disabled in device manager, it also makes A: drive use ms-dos mode compatibility.
I used the setup mode of the adapters BIOS to format the hard drive, After it formatted and I continued it says that it can't find a scsi hard drive.
 

A:SCSI Adapter/hard drive problem

Did you run FDISK and see if the drive is visible there?

Are you sure you have your SCSI termination correct?

If there are 98 drivers for your card you shouldn't need to load a driver file in the CONFIG.SYS - as you have seen it will put you in compatibility mode if you do.

Just checked the DTC site - it says:
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Windows 98 Drivers

Included - Use built-in Adaptec 151x/2x drivers <HR></BLOCKQUOTE>

Is that what you are using?

------------------
Get free stuff and help out a poor computer tech
(5/20 new, unlimited, pay to surf site added):
http://www.rkfdcore.com/ebaypics/referrals.htm
 

Read other 3 answers