Over 1 million tech questions and answers.

How can we enable microphone icon on windows 10 tablet touch keyboards ?

Q: How can we enable microphone icon on windows 10 tablet touch keyboards ?

I have a requirement to use speech dictation along with touch keyboard for a windows 10 tablet application. Currently I am not able to find the microphone on the touch keyboard. How can we enable microphone on windows 10 laptop touch keyboards (as
in ipads and android tabs).
Thanks in advance

Read other answers
Preferred Solution: How can we enable microphone icon on windows 10 tablet touch keyboards ?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


Windows XP Tablet Edition had to be removed from my Lenovo ThinkPad X41 tablet because the PC was issued for school, and the school-licensed software had to be removed. Now I'm running Windows XP Pro (a mistake on the school technical administrator's part?), and the touch screen no longer responds to the stylus.
I tried to contact the school technical administrator, calling to his attention that I'm no longer running Tablet Edition, which is probably necessary, but he has not responded.
I've tried installing such drivers as 7jge15ww and 913z07us, and I've run the ThinkVantage System Update several times, to no avail. Is there a driver I'm overlooking? Is it at all possible to simply USE my tablet properly without having to go out and buy Windows XP Tablet Edition?

A:Enable touch screen for Lenovo X41 tablet

You can get Recovery Discs from IBM is the built in Recovery partition and utility are not longer on the laptop from IBM/Lenovo by going here: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-4M7HWZ

If the Recovery Partition is still intact and accessible you can return to Windows XP Tablet Edition by following these instructions: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4UFUYK

Looking at the downloads I don't see a driver for the Touch Screen: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67100
When you ran the System Update utility you installed all the drivers and software/accessories updates?

Read other 1 answers

preview document view here : http://pdfsr.com/pdf/touch-plus-for-windows-10-tablet
video demo : http://johanwang2014.blogspot.com



Read other answers

 Hello! I've got some issues with my tablet.The internal microphone is not working, only microphones connected to the microphone/line-in jack. recording devices in the sound panel on win7: only the "external" microphone (jack) is available                      microphone / line-in jack on the X61t      internal / integrated microphone on the X61t   Any ideas what could be going wrong? Do I need a separate driver?Thanks in advancePete  

lenovo ThinkPad X61t | Windows 7 Pro SP1 64-bit | 4GB DDR2 GeiL | 120GB SSD OCZ

Read other answers

In Windows 7, we can disable touch ( or tablet input ) by :
sc stop tabletinputservice
However, in Windows 8, touch still works after stopping the tablet input service.
Does anyone know how to comletely disable touch in Windows 8 ?
Thank you

A:How to disable touch ( tablet input ) in Windows 8 ?

You can disable your Touch device in Device Manger to achieve your purpose.
Juke Chou
TechNet Community Support

Read other 3 answers

My X220 tablet comes with pen and limited touch support with 2 touch points. I have no issues on windows 7 but on windows 8.1 it has changed to be working with only 1 touch point since some time that I don't remember exactly when. So that I can work with one finger only and 2-finger functions such as pinch to zoom are unavailable. My drivers are all uptodate. I think I should completely uninstall the related driver before reinstalling but don't know how to procede and couldn't find the solution. I tried uninstalling all HIDs through Device manager and one-by-one, specifically wacom device. when I uninstall it, I lose touch option completely. but reinstalling through Device Manager sounds like recovering exactly the previous faulty condition. Maybe there is a conflict with windows 8.1 like Microsoft Input Configuration Device which might be unlikely.  So is there any other way to have full wipe and clean reinstall of those touch screen drivers? I appreciate it if you put links to the drivers for me, if they are not available on Lenovo Support. Tell me if you had the same touch issue in Windows 8.1  and how you solved it. Thanks 

Device manager.JPG ?72 KB

Read other answers

I am trying to work on OBD2 bluetooth car dongles and, because of traditional Windows difficulties with phantom serial port retention, I needed to find a machine with little in the way of features that could confuse me by having many serial ports already in use. I also wanted to use Windows 10 to look at its enhanced features eg bluetooth in Microsoft Message Analyser. My old X200T looked ideal. It worked perfectly in W7 and provided pen and single touch, thus being ideal for working in the front seat of a vehicle. The update to W10 went well, and the pen works fine, but single touch does nothing. At one stage in thrashing about with drivers, I had it working on the touch calibration on-screen "targets", but it did nothing when I touched the on-screen touch pads. Even that has now stopped working. I think the problem may be related to the fact that Microsoft is telling me that it has Pen and Touch support with 2 Touch points. If I uninstall everything related to Wacom and reboot, Pen disappears, but Touch with 2 touch points always comes back. Has anyone else seen this and found a workaround?

Read other answers

I have a Lenovo tablet (yoga tab 2) it was installed Windows 8.1
During upgrade to Windows 10, it turns off and then sends the following error message:

A require device isn't connected or can't be accessed.
Error code: 0xc000000f

Now when I try to install Windows 10 or 8.1 (with a bootable flash), after knowing the flash, and in the first step (in language selection),
the tablet's touch screen does not work.
I tried many times but I did not get any results.
I'm glad if a friend guides me.

Read other answers

hi everyone, i am a new one, i have one install problem.
the touch screen is iltek, and it is work on the setup stage, (during the boot up), but when it is finish install, the touch screen not work at all...,
i need to restart the tablet many time, some time it will lucky get recognize for the touch, but it is not usable...
any solution or same Situation?
the touch screen is 100% work on the windows 7 and android x86.

thx for your help.

A:tablet touch screen problem in windows 8 install

Do into your Device manager and check if any devices need drivers. What model laptop is it cos you may need to install the touchc screen software pertaining to the tablet.

Read other answers

My son showed me his iPad today running a program called Notability. He had a special pen used to write on the screen and he could store is drawings and/or notes as files the same as we store Word documents.

I have no desire to change to a Mac so here's what I'm considering.
A Windows 10 touch-screen-type tablet with i7 (or maybe i5) processor, a keyboard that can either be used like a stand-up laptop and folded back for use like a tablet.
A program like his Notability for Windows (I have no idea what is available or what it would be called.)

Advice and accounts of your experience appreciated.

PS, I really don't care for the Microsoft Surface Pro I have seen and have found so far that Asus seems to give a really good bang for the buck.

Read other answers

Hello, I'd like to know how to enable my front microphone/headphone entrance (the green and pink ones) on Windows 7

Thanks =)

A:How do I enable my front microphone and headphone jack with Windows 7?

The front panel should automatically be enabled, providing the cable for the front panel audio is connected to the motherboard, and you are using the correct sound driver. I assume you have Realtek as I used to have a P8Z77 LE Plus motherboard and it had Realtek on board audio.

On many PC cases there are two connections available for front panel audio, "HD Audio" and "AC 97". The HD Audio is preferred as it as some jack sensing functions that the older AC97 does not have.

I looked at the Realtek HD Audio Manager on my system and there is no option to enable or disable the front panel jacks. There is an option to mute or not mute the speakers when a headset is plugged in but that's all.

Even if you only have the generic, basic function, Windows installed High Definition Audio drivers installed instead of the correct hardware drivers you should still get front panel headphone operation.

Read other 1 answers

I recently bough an Asus VivoTab Smart running windows 8 and everything was fine up until today when at some point the touch keyboard stopped disappearing whenever i needed to log in to the tablet! its annoying to have to find the on-screen keyboard and
i would like to have the touch keyboard back.

I have tried restarting many times and that does nothing, i have tried updating the driver but i cant as it says that it already has the driver up to date and that its running properly!

Any help is appreciated! thank you,

A:Windows 8 tablet touch keyboard DISAPPEARED from login screen!

I don't know if this will help you but it solved a similar problem I had on my Windows 8 touch PC:
If you are able to reach the Start/app tile screen or desktop and from there "view local services" which you can find by typing "services" in the Start screen scroll down the list until you come to the "Touch Keyboard and Handwriting Panel Service" which
should say "Automatic (triggered)" and "Running"
From there "right-click" that service (or otherwise get into its properties), click the "Log On" Tab, click the first option under "Log on as:" (circle button "Local System account") and make sure to Check box "Allow service to interact with desktop"
For me this box somehow became unchecked when I "Refreshed" my windows 8 to solve another issue. Once I checked the box, the keyboard started to reappear at the login screen.

Read other 4 answers

So I'm looking for some kind of maths keyboard which I can use to easily add maths symbols to my lecture notes. Best way I could think of doing this is with the touch keyboard. With the touch keyboard you can hit the little keyboard button bottom left and change between a regular keyboard, split keyboard, or like...writing keyboard. Surely you could add a fourth? Either with a custom character set or a premade maths one? I know about the maths input panel, but it can't recognise all symbols flawlessly, and it would be much quicker to have the most used ones readily available on the touch keyboard.

A:Custom touch keyboards/maths symbols keyboard

I'm guessing.

Microsoft Mathematics - Download

Math Keyboard 1.1 - Free Download

Read other 2 answers

Did not know exactly where to make this post so selected Sound and Audio - hope I am right:

Windows 7 OS on my Gateway FX computer. When I try to start the Speech Recognition app, no microphone control panel shows on the screen.

I have set up the audio for Speech recognition, done computer training and went through the tutorial - that part works fine.

I have tried the commands "Start Listening", "Show Speech Recognition" but no icon appears. No icon appears when I manually select Speech Recognition within Control Panel.

Anyone who can help will be much appreciated.

A:Speech Recognition Windows 7 - no Microphone icon

In the lower right corner of your desktop There is a little arrow that says " Show Hidden Icons." Click on the little microphone in a circle. That will open a box showing some microphone options, among them is to turn the mike on or off.

Read other 1 answers

I would like to know how I can enable the physical keyboard in my convertible laptop using the tablet mode? I am not referring to the onscreen keyboard, but the actual physical keyboard, which is normally disabled in the tablet mode. 

Read other answers

Is it possible to enable wireless/USB external keyboard and/or mouse when switching to tablet mode?  Thanks!

Read other answers

Hi everyone,

I have a Thinkpad Tablet 2, with Win 8.1. When I first got it there was no hibernation option at all. Somehow, after jumping some hoops (I don't remember what I did -- it was a while ago), I did get the hibernation option to appear in the power menu. It still does not appear in Control Panel, however (see Screenshot 2).

I attached some screenshots. (It looks like the forum inverted my intended order, so screenshot 1 became the 3rd one.) This system does support hibernate, but apparently none of the possible sleep states (???). See screenshot 1. In Screenshot 3 you can see that under advanced settings for Power Options, the normal Sleep setting/menu is completely missing. So I can't set a timer for hibernate. I tried checking the BIOS, but there was absolutely nothing to change/enable/disable except time, password, and disabling the battery.

I would really like to be able to set a timer for hibernate! I can hibernate the damn thing by the power menu, but I'm getting sick of finding the tablet completely drained of power because I had forgotten to hibernate it. How can this be achieved?


Read other answers

Hi everyone. I'm very new here. I just got my Lenovo Yoga 2 Pro i7 8GB last month. And I'm wondering if it's possible for the keyboard to be enabled while in tablet mode. Since I wanna make it as my external keyboard and I'm gonna use an external monitor for bigger screen through MicroHDMI-HDMI connection. Please let me know how to do it. I hope someone can help me here. Thank you

A:Yoga 2 Pro: Enable keyboard in tablet mode

Follow this post: http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-Pro-Screen-Rotation/td-p/1503752 Once we figure out what program fixes his issue, you just got to uninstall the program in question. 

Read other 9 answers

I think Apple is gonna run with this once again and Microsoft will be late to the party. Right smack in the middle of Windows 7 release.
What do you think? For years Microsoft and Bill Gates have been pushing tablet pcs and they never cought on. Apple is rummored to release one and I bet will be the hottest thing in town.

A:Where are the multi touch tablet PCs?

In my opinion, tablet PC's will not reach the majority since they are expensive and unnecessary.

Only rich people with Ikea looking houses will buy these...

Read other 2 answers

I have a microphone that works only as such, with no speaker and is not a headset.  I am trying to get it to work with my Lenovo x230 Tablet laptop.
When I plug it into the 3.5mm port on the right side next to the Ethernet input nothing happens and it doesn't show up in my windows sound or do anything except change the top left port under "Analog System" from gray to black.  Unfortunately that is the audio port not the microphone port.  This is shown by the next two pictures.Microphone not plugged in:
Link to picture
Microphone Plugged In:
Link to picture 
So something is up...I tried again by going to the "device advanced settings" and changing it from "classic mode" to "Multi-stream mode".This atleast shows in the windows control that there is a "external mic" and a "docking mic".  I have no idea what the docking mic is.  Anyway this picture below is what happens before I plug in the mic:
And now when I plug it in:
Link to picture
As you can see the windows controller is unchanged in the input recording tab but, the realtek program has detected the mic again by turning on the analog headphone button on.  As well as adding an extra tab to the program called "HD Audio 2nd output".  As far as I can tell t thinks my mic is a headset for some reason.  I wish to change this.  When I switch over to the sound tab on the windows program it shows an added headset which is actually it... Read more

A:External Microphone won't work on x230 Tablet

Also it seems as if the Microphone and earbuds from my Samsung Galaxy S3 do work as both a headset and Microphone.  But my microphone only device doens't work, what gives?

Read other 5 answers

Does anyone know how to enable their physical keyboard while using their laptop in tablet mode. i have an external monitor and want to use the laptop in tablet mode to save space. thanks for helping!

Read other answers

Hi everyone, I have an external monitor hooked to my Yoga 730. I use the external monitor only, and would like to be able to use the Yoga's keyboard when in tablet mode like in the picture below. Some people have suggested using a magnet to disable some sensor, like here, but I would like a software solution.  Has anyone succeded?  Thanks!   

Read other answers

hi folks,

i could use some help here.

i have an ASUS U30J. i unintentionally disabled my Microphone under the "Recording" tab under the "Sound" control of the control panel.

since that was my only recording device coming from my integrated mircophone, i want to enable it again, but it is nowhere to be found. the "Recording" tab iust empty.

techie guys, any help would be greatly appreciated.


A:SOS: Microphone disabled, want to enable.

Right click on the Recording Tab to Show Disabled Devices.
Highlight Microphone, select Properties to enable the device.

If the Microphone has a red icon by it, unplug it.
If you have installed the software from Realtek, VIA, etc, then plugging in the device should cause a
detection pop-up to appear. Click OK to confirm the device. It should be ready to use.

Read other 3 answers

I've disabled my conexant mic in "manage audio devices" while trying to get a plug-in mic to work. I expected to easily re-enable the mic, but instead, the system no longer recognizes it at all. Instead, it the message reads "No audio devices installed."

Is there a way to enable the resident mic without re-installing the OS?

Thank you...

A:Re-enable Conexant microphone?

Originally Posted by czyp

I've disabled my conexant mic in "manage audio devices" while trying to get a plug-in mic to work. I expected to easily re-enable the mic, but instead, the system no longer recognizes it at all. Instead, it the message reads "No audio devices installed."

Is there a way to enable the resident mic without re-installing the OS?

Thank you...

can you take a picture of your sound devices? usually no audio devices means that you have disabled it in device manager.

Read other 2 answers

Recently, I was messing around in control panel, and ended up disabling my integrated laptop microphone, specifically by going to Manage Audio Devices -> Recording, clicking on my integrated microphone, and then disabling it. I was hoping to only temporarily disable it and re-enable it some time later... the only thing is, I don't know how.

I use Windows 7, and when I return to Manage Audio Devices -> Recording, I just don't see my integrated microphone there.

A:Re-enable integrated microphone?

right-click on the "little box where stuff is" (for the lack of my vocabulary ) and select "show disabled devices" also it would be a good idea to check the other one (to lazy to go look at the name of it)

Read other 3 answers

My HP Pavilion 360 does not switch to tablet in some Roblox games, well to be clear it does pop up the switch to Tablet dialog and touch works but you don't get the touch on-screen controls for moving etc. so it's like somehow the game does not now know that it's a tablet  This is inconsistent as the tablet works in some Roblox games and not others. Has anyone else experienced this and if so how did you fix it? e.g The onscreen controls show and work in Roblox game "Stop it slender 2" but not in Roblox game "prison life" 

Read other answers

Hello, I recently purchased a new mic. The sound itself works perfectly. But the mic does not work, I did go to recording devices and enabled show disabled devices, I see "Microphone" but when I click enable nothing happens, it stays disabled. I have realtek HD Audio Manager and I am not sure if it picks up my mic. I tired 3 different ports. Keyboard, front panel and back panel. Nothing works. I tried with a different mic and still the same error. The mic does not use its own drivers, it uses Windows drivers such as the Realtek HD audio manager.




A:My Microphone is stuck on disabled, won't enable.

Welcome to the forum.
Here is how to post screenshots on this forum
Screenshots and Files - Upload and Post in Seven Forums

What kind of mic do you have? A USB connected or a standard computer mic with a 1/8" (3.5mm) stereo plug?

I notice in the Recording section screenshot that Stereo Mix is Disabled. That should be set as the default recording device. RIGHT click in a blank area in that panel and click to Show Disabled and Disconnected Devices. Then Enable the Stereo Mix and make it the Default recording device. That may not fix the mic, but it is a first step, as having Stereo Mix set then whatever input device is used is heard, and if you ever want to record audio from the Internet you must have Stereo Mix.

Read other 6 answers

Hi guys,

This is my first post, i've stumbled to this forum after a couple hours of research.

Seems like there's not much real solution out there, I would really appreciate it if someone could shed some light on this issue.

Anyways, my girlfriend is a Karoke Freak, so i promised to set it up on my computer. But after hours of attempts..... i failed ><

Vista doesn't seem to playback from the microphone, although it records no problem.

It seems there's a simple configuration for SigmaTel sound cards, but i have a realtek soundcard. (here's a previous post for some reference: talk through mic hear out of speakers )

It would be a HUGE help if someone could give me some pointers.


Read other answers


Configuration :
HP Pavilion tx2000z CTO NB
Genuine Windows Vista Home Premium with Service Pack 1 (64-bit)
AMD Turion(TM) 64 X2 Dual-Core Mobile Technology Gold Edition TL-68 (2.4 GHz)
12.1" diagonal WXGA High-Definition HP BrightView Widescreen (1280 x 800) w/Integrated Touch-screen
4GB DDR2 System Memory (2 Dimm)
NVIDIA(R) GeForce(R) Go 6150

NVIDIA GeForce Go 6150 Video Driver -
This is the video driver version for my HP tablet(HP Website). But unknowingly I installed the latest version( from NVIDIA through Windows update. And from that time onwards, my touch screen stopped working. It is not recognizing my stylus/finger.
I contacted HP care and they advised me to follow these steps.
1) Uninstall the latest driver and install the 11.5682 driver
2) Bios Flash
3) Calibrate
I am done with the first two steps but still my touch screen is not recognizing the pen. So I couldn't calibrate.
When I contacted the HP care again, they are telling it may be because of hardware failure. My notebook is working perfectly except this touchscreen.

Please anyone help me to solve the issue.


A:HP TX2000Z Tablet touch screen not working

Can you please tell me, what is the best way to install video drivers.

I tried in 2 ways
devicemanager ->display adapter -> Nvidia 6150 -> uninstall
Add/Remove Programs -> Remove only display adapter

After reboot, still it is asking me "Do you need to overwrite the files?

Read other 3 answers

I have an ASUS tablet that I don't know the model nor is it listed anywhere on the tablet. it originally had a detachable keyboard but the guy that gave it to me didn't have it. according to device manager, it has a generic touch screen driver. I have frequent unresponsiveness and sporadic automatic touches a with the touch screen, and I think it may be due to the generic touch screen drivers. If I had the ASUS one, I think it would work better. Device manager reports the hardware ID as: HID\VEN_ATML&DEV_1000&Col01 but no search engine can find it. Google had only two pages of results, all of which were dodgy. Many others like Yahoo only had one page of results of the same dodgy or other dodgy results. I was wondering if you can lead me to the right one. You have been so helpful with finding me drivers before so I am sure it would be no problem.

A:Need touch screen drivers for ASUS tablet

Please download MiniToolBox to your desktop.
Right-click on MiniToolBox.exe and select Run as Administrator.
You will see an image like the one below.

Click on the following checkbox only:
• List Installed Programs
Click on Go to start the scan.  Once it is finished highlight the text, then copy it and paste it in your topic.

Read other 9 answers

I have just bought a 7" Android tablet from China at a very good price. It works well except for one thing, scrolling on the touch screen. I have to press hard to get it to scroll which causes it to open up what was pressed or it will scroll very quickly to the bottom of the page. I don't seem to have any control over the scrolling. I have contacted the company about this and I am waiting on a reply. Would anyone have a solution to this problem? Thanks.

A:7" Tablet touch screen problem

Perhaps there's a setting for touch screen sensitivity?

Read other 11 answers

This is my first post here. I use PSPro for drawing for fun. I use a mouse. Recently I was given a tablet. In theory this is better, as holding a pen is easier than the mouse for drawing. The main problem is that the image is on the laptop screen and the pen is on the plain tablet, so you have to guess where to start drawing by moving the pen around until the cursor is positioned where you want it. The next problem is that I do not want to relearn all the PSP commands (and positions around the edge) on the tablet. The mouse works with the tablet, but putting the pen down to use the mouse is a hassle. There are expensive (around 1000) tablets with a touch screen where you draw on the image, just like a pencil on paper. Too expensive for me. Is there a touch-screen tablet that will work with Paint Shop Pro? What about an Ipad? I dont really know how a touch screen works with a programme liike PSP. Do you just touch the screen in the same place as you would position the cursor? Does a tablet have USB ports so I could save my work on a memory stick, or by cable to the drive in my laptop? I dont know if its possible, but If I could draw on the touch screen and save my work on my laptop, this would be ideal. I hope someone can help. Thanks in advance.

A:using paint shop pro on a touch-screen tablet

Read other 6 answers

my hp x2 210 tablet fell down and broked . The touch is also disabled ! i want to replace ithow much will it costs? please contact me at [email protected] india bangalore, karnadaka

Read other answers

Hi, After a few minutes using my tablet, I notice that the touchpad starts to act up. More specifically, it makes phantom double clicks when using touch to tap. In order to solve that, I need to remove the keyboard and connect it back again.I'm using the latest Lenovo Synaptics drivers (version Should I start using generic drivers instead?Coming from a Surface with a stellar touchpad experience, this is quite the letdown. The tablet is unusable without an external mouse and I refuse to deactivate touch to tap - this is a must have on a modern touchpad. Thanks for your pointers

Read other answers

When the computer is off - and I split the tablet from the keyboard - I then start the tablet up - everything boots fine.  When I open up a browser (either firefox or edge) and  I  touch the address bar of the browser to put the cursor there and then touch the icon to bring up the onscreen keyboard - I try to type in an address but the keyboard switches every 3 or 4 seconds between 2 different kinds - one with a .com (and a .ca also- I'm in canada) near the spacebar and one without it - I cannot get in more than 2 or 3 characters before the browser highlights the address bar - and I can't enter any more characters unless I delete them and type real fast. I'm sure it is some sort of windows 10 issue with the on screen keyboard being used with a browser (problem only happens when I use a browser - either of the above). I can get around this by opening google and typing my address in the googles search window in the main body of the screen - but no other way. I have updated windows and all the hp drivers - am at a loss - did an internet search and nowhere could I see that peoples on screen keyboard has the .com button next to the spacebar. This issue does not happen if I start the unit up with the keyboard & screen attached - then detach it and work with it as a tablet. I have also tried various windows settings as touch friendly tablet mode - with no luck. I should mention one other anomily that may be related - sometimes wh... Read more

Read other answers

I own a Fujitsu TH700 Tablet PC. It initially ran Windows 7 and everything was working really well on it, but then I upgraded to Windows 10 (I was curious) and some features just have not worked properly since. The one problem that I have been unable to fix is the touch screen. When the computer is in its "laptop position" (see image) the touch screen works just fine. However, when I rotate the screen and click it into the "tablet position" the touch screen becomes completely unresponsive. When I lift the lid again into the "laptop position", the screen remains unresponsive until I put the computer to sleep and wake it up again. After that, it works completely fine.

When the laptop screen is turned and clicked into the "tablet position", there is a programming shift that happens to turn the laptop into "tablet mode" (this is not the same as Windows 10 tablet mode. In-fact, Windows 10 tablet mode doesn't recognize me turning the screen and clicking it into the "tablet position"). I'm not sure what the differences are between the TH700's laptop mode and tablet mode. The only thing I can see is that the screen auto rotates (as shown in the image).

This malfunction started occurring soon after I downloaded Windows 10, but I'm fairly sure it was working properly for a week or so. It was only when I connected my TH700 (in the "tablet position") into an external projector that the touch scree... Read more

Read other answers

Hi there...please help!!!! My touch screen has randomly stopped working, also when I flip my screen to tablet mode it no longer automatically reorientates itself. It is a Yoga 2 13 laptop type 80DM running Windows 10 (64Bit). Many thanks!!!    

A:Touch screen and tablet mode issues

Sorry forgot to add that it is a Yoga 2 13 laptop type 80DM running Windows 10 (64Bit)

Read other 1 answers

I aquired an HP TX1305US convertable touch tablet. it seems to have some issues with the touch screen. first of all, half the time, the touch doesn't work. anytime i flip the screen around into tablet mode, the pointer goes haywire and when i go back to laptop mode, the pointer is stuck in the corner, and it can't be moved. also, the application toolbar comes up and the only way to fix it is to reboot. i uninstalled the tablet functionality through windows and reinstalled and the problem is still there. additionally, when the touch screen was working, i had to use alot of pressure. i was kind of expecting it to work like an ipod touch or pda. i'm not sure if this could be hardware or software. the laptop has vista ultimate. i checked ho for all the updates and everything should be current. any ideas of what could be the problem?

Read other answers

How do I enable the touch screen on my Probook 430 G3.  It says it has the feature, but I can't find it.  ThanksLu

Read other answers

How do I enable the touch screen on my Probook 430 G3.  It says it has the feature, but I can't find it.  ThanksLu

A:enable the touch screen

As far as I am aware, your notebook is not a touchscreen version.  The specifications verify that to be the case for most notebooks of the model that you own. What is the complete product number or product name of the G3 notebook?  - see This HP web document if you don't how to locate the complete model number and\or product number. http://www8.hp.com/emea_africa/en/products/laptops/product-detail.html?oid=9043871#!tab=specs http://www8.hp.com/nl/nl/products/laptops/product-detail.html?oid=7834547#!tab=specs 

Read other 1 answers

Hello I have a dell 14 5000 5459 and I want to activate the touch screen but not 'how. If someone knows a solution very grateful in advance.Greetings.

Read other answers

Can I enable Touch Pad from start up in the absence of my mouse

Note I keep Touch Pad disabled for convenience but my wireless mouse can sometimes fail leaving me stranded

A:Enable Touch Pad without mouse

It is possible, but the solution depends on the brand & model of the laptop? What is the brand and model?

Read other 2 answers

so i keep having to (re)start the service. (note: the problem only occurs after i had stopped the service one time before)

so is there any way to make it stay up, and not keep having to restart it? yes i have tried setting it to Automatic, and Automatic (delayed start)... all the Recovery options (in case the service fails) are set to "Restart the Service" (reset fail count after 1 day), (restart service after 1 minute) i checked for dependencies, and couldn't see any.

any idears? running a Gateway ZX6800

Windows 7 Ultimate
Processor = Intel Core2 Quad CPU Q8200 @ 2.33GHz 2.33GHz
Installed memory (RAM) = 8.00 GB
System type = 64-bit Operating System
Pen and Touch = Touch Input Available with 2 Touch Points

A:Tablet PC Input Service keeps stopping. (it disables touch)

now not only does it disable touch, but it disables the gestures as well. so no dragging with your finger on web pages...

Read other 1 answers

Hi everyone, I have a problem with touch keyboad. It properly functions while I turn it on and use the computer in a regular manner. However, when I turn on the tablet mode and try to type, it shows up only for a second and disappears. I saw a similar topic on this issue where it was advised to install mode controll drivers. I have done this (version, however, nothing changed and the issue still exists. I found numerous discussions on this matter (it seems to be a common problem), but nobody was able to give a real advice which would actually help to solve this issue. I would appreciate if you could share your experience and advice on this. Thank you! 

Read other answers