Over 1 million tech questions and answers.

Network Icon has Red Cross

Q: Network Icon has Red Cross

The Network Icon (wired) in my Task Tray has a Red Cross against it. No error shown in Device Manager. Network Diagnostics don't find an error and I don't seem to have any issues LAN or WAN but Automatic Windows Updates are not working. Manual Updates are OK and all the associated services seem to be running. I don't know if these two are connected.

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.40GHz, x86 Family 15 Model 2 Stepping 4
Processor Count: 1
RAM: 2047 Mb
Graphics Card: Mirage Driver, 3 Mb
Hard Drives: C: 74 GB (27 GB Free); D: 149 GB (17 GB Free);
Motherboard: Gigabyte Technology Co., Ltd., 8PE667U
Antivirus: ZoneAlarm Antivirus, Enabled and Updated

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Network Icon has Red Cross

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 72

I am connected to a network and have internet access.

However, the network status icon has a red cross on it as if i am not connected. Even more strange is if i hover over the icon its read "Network Internet access"

I don't use any third party connection software and don't have any third party firewalls running.

I am plugged in direct to the router with an ethernet cable.

This isn't a massive problem but i'd prefer the icon not to have the red cross on it.

A:Network status icon has red cross

Hi and welcome toTSF If in fact you are connected but you see the "not connected" icon and
status you describe, you may have two wireless configuration utilities
running simultaneously, and you should disable one of them it may have been installed accidentally

Read other 4 answers
RELEVANCY SCORE 71.2

Dear folk

My desktop windows 7 64 bit was working fine til I walked up yesterday and there was a red cross on the network icon!!!

Ethernet cable working fine as when i hooked it to my laptop everything is working fine , means problem lies within the desktop and nothing wrong with cable or router port.

Troubleshoot that I had done so far :

Restarted desktop 3 times, uninstalled LAN driver, connected new Ethernet cable

What else I need to check to find out what is going on ?

Thanks
 

Read other answers
RELEVANCY SCORE 69.6

Hello, I am new to this Forum.

My Wireless Network Signal Strength Icon is currently displaying a red cross as per this Screen Shot:

Despite the incorrect icon display, my Local Wireless Network is functioning perfectly.

How can I restore the Icon to display rising bars?

Assistance will be gratefully accepted, thanks.

Highland Rob

A:Wireless Network Signal Strength Icon Displaying red Cross

That's the icon for your wired network, not your wireless.

Read other 9 answers
RELEVANCY SCORE 60.4

I got infected with some malware. I'm not sure which one it was. I had popup ads coming up on my computer all the time, and error messages with bad grammar on them.I installed Mc Afee, Ad Aware, Spybot search and Destroy, vundo remover and run them all. I also ran Mc Afee Stinger as suggested on here. Each of them removed some malware.I still have a Red x (like a delete icon) instead of the hard drive icon when I look at my hard drive in My Computer. Also if I disconnect the internet from my PC I get IE "Work Offline - No connection to the internet is currently available" messages come up, even though I don't use IE!!! Sygate firewall is reporting that windows explorer is trying to connect to the internet as well, I don't know if that's part of it or what.Can someone decipher my HijackThis log and/or help me out? Cheers!Logfile of Trend Micro HijackThis v2.0.2Scan saved at 7:49:03 PM, on 21/02/2008Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Sygate\SPF\smc.exeC:\Program Files\Common Files\Symantec Shared\ccSvcHst.exeC:\Program Files\Com... Read more

A:Red Cross/delete Icon Instead Of C Drive Icon

Hello 3lpete and welcome to the BC HijackThis forum. I don't see any signs of viruses or malware in the log. It's clean. Let's try a different scanner and see what we can see.Before running a new scan let's clean out the temporoary folders. Download ATF Cleaner to your Desktop.Double-click ATF-Cleaner.exe to run the program.Click Select All found at the bottom of the list.Click the Empty Selected button.If you use Firefox browser, do this also:Click Firefox at the top and choose Select All from the list.Click the Empty Selected button.NOTE : If you would like to keep your saved passwords, please click No at the prompt.If you use Opera browser, do this also:Click Opera at the top and choose Select All from the list.Close ALL Internet browsers (very important).Click the Empty Selected button.NOTE : If you would like to keep your saved passwords, please click No at the prompt.Click Exit on the Main menu to close the program.Now download WinPFind35u.exe to your Desktop and double-click on it to extract the files. It will create a folder named WinPFind35u on your desktop.Note: You must be logged on to the system with an account that has Administrator privileges to run this program.Close ALL OTHER PROGRAMS.Open the WinPFind3u folder and double-click on WinPFind35U.exe to start the program (if you are running on Vista then right-click the program and choose Run as Administrator).In the Drivers section click on Non-Microsoft.Under Additional Scans click the checkboxes in front of th... Read more

Read other 30 answers
RELEVANCY SCORE 56

what does red cross on battery icon mean next to clock on taskbar. when i move the mouse over the icon, it says fully charged

A:red cross on battery icon

Normally, it indicates that the battery needs charging but clearly in your case this is erroneous. Take a look here also:
Stupid Stupid Laptop Battery
http://www.computerworld.com/s/artic...ttery_problems

Read other 2 answers
RELEVANCY SCORE 55.6

there is a red cross icon on my local drive d..i have attached the snapshot of it.plz do suggest me the solution......it is very annoying......

A:RED cross icon on local drive D ......

Prt Scr of disk management please.

Read other 9 answers
RELEVANCY SCORE 55.6

No Audio Output Device is Installed---- Please help me i downloaded service pack 2 since then no audio outpu device installed cant seem 2 find any downloads 2 fix the problem can ANYONE HELP vISTA ON AN ADVENT 5611
 

A:the dreded red cross at speaker icon

Read other 8 answers
RELEVANCY SCORE 54.8

My wife and I are annoyed by that cross icon at the top left that comes up with a Word for Windows document. We don't know what is the function of that and it creates problems. What do we do?
 

A:Cross icon on top left of page of Word

Read other 6 answers
RELEVANCY SCORE 54.8

Dear all,

I am in dire need of help to fix my laptop sound card. My laptop (TOSHIBA M600 on windows vista basic as its original operating system) has been working perfectly for the last 3 yrs. Just about 3 weeks ago the the volume icon on the bottom right hand corner of the screen had a red cross marked on it. I am no longer able to listen to online lectures, music, videos etc. I opened the device manager and found no such things as Sound, video and game controllers. This happened after one of my friend installed a faked windows 7. Since then i decided to buy and re-installed a legal window 7 professional, but the problem persists. The volume icon at the bottom of the screen still has a red cross on it.

Some kind people out there please help me...i am a student and cannot afford it to be fixed by those expensive computer genius in the computer store. Also....please use simple lay people english when you give instructions or help.

Thank you so much in advance
Noelu

A:Portege M600 - Volume icon has a red cross on it

Hi buddy,

Usually such a red cross means that there is a no sound driver installed or driver is muddled up? Have you already tried to reinstall the sound driver?

What sound card you have installed?
Normally you can get all drivers on official Toshiba website but for an older model like yours I could imagine that you must check other pages. For example if you have a Realtek sound card, check the Realtek page directly: www.realtek.com

Read other 6 answers
RELEVANCY SCORE 54.8

Help!! I have a new (ish) laptop and everything has been fine until a couple of days ago when a red cross appeared on the speaker icon.  I've run the diagnostic tool by clicking on the icon but only my Bose wireless headphones appear in the list, and the tool is unable to resolve the probem with the speakers.  When I use the Bose wireless headphones, the red cross goes and the headphones work fine.  I've tried the Device Manager too to clear the red cross issue, but cannot find a way for it to help resolve the problem. The laptop doesn't have any sound from the speakers, nothing.  If I plug normal/ regular headphones into the jack, then the Bang & Olufsen message appears on the screen to notify that the headphones have been connected, but there is no sound from the headphones and the cross remains on the speaker icon. If I hover over the red cross then a message appears "no speakers or headphones are plugged in"     

A:No sound from speakers, red cross on speaker icon

Hello @George73, Please check your other post : https://h30434.www3.hp.com/t5/Notebook-Audio/No-sound-from-speakers-red-cross-on-speaker-icon/m-p/60...   Hope this helps, for any further queries reply to the post and feel free to join us again !!  **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84I am not an HP Employee 

Read other 1 answers
RELEVANCY SCORE 54.8

Ive been using W7 since the early builds and am on HP 32bit these days.
In the past if i lost internet connection i would get a red cross on the network icon. This would go away once connection was restored.
This past week or so this cross keeps appearing. Thing is the connection is fine, no problens what so ever.

Anyone else experienced this. Please no "Clean install" replies, thats way to drastic.

Thanks for any help.

A:Nework icon has a red cross on it but connection is fine

It sounds as though it could be a driver issue. On the odd occasion when I lose connectivity, it's only to the Internet so my icon just shows a yellow triangle with the exclamation mark superimposed on it. Fortunately, my router automatically reconnects if this happens, so I'm not down for more than about a minute.

As your board is based on the NVidia nForce 570 SLI MCP, you could try to see if these drivers might help (make sure that you create a restore point prior to installing) NVIDIA DRIVERS 15.53 WHQL

Read other 8 answers
RELEVANCY SCORE 54.8

hp pavilion 15 notebook pc 15- e038tx   ,when i am connected to the internet, icon on task bar not changed continuously shows red sign or cross,i am using data card (usb dongle) i browse download and upload good but but icon not shows you are connected please help me hp pavilion 15 eo38tx  windows 7 64bit

A:internet icon shows red cross when i am connected

Hi shah-aijaz, Sorry to hear that you are having issues with the wifi on your notebook. I have done some research and I have found that the computer that you have listed does NOT have Windows 7. Are you certain that you are giving the proper model number of your computer?  Please check the bottom of your computer and the product number should be listed on a white sticker by a bar code.

 

Please write back at your convenience.

 

Thank you.

Read other 6 answers
RELEVANCY SCORE 54.8

Help!! I have a new (ish) laptop and everything has been fine until a couple of days ago when a red cross appeared on the speaker icon.  I've run the diagnostic tool by clicking on the icon but only my Bose wireless headphones appear in the list, and the tool is unable to resolve the probem with the speakers.  When I use the Bose wireless headphones, the red cross goes and the headphones work fine.  I've tried the Device Manager too to clear the red cross issue, but cannot find a way for it to help resolve the problem. The laptop doesn't have any sound from the speakers, nothing.  If I plug normal/ regular headphones into the jack, then the Bang & Olufsen message appears on the screen to notify that the headphones have been connected, but there is no sound from the headphones and the cross remains on the speaker icon. If I hover over the red cross then a message appears "no speakers or headphones are plugged in"     

A:No sound from speakers, red cross on speaker icon

Hello @George73,  Before we go to the software part of this red x volume icon we will first have to check if your hardware is operating in the necessary parameters. Move the mouse pointer over the lower right side of the screen for the ?Charms? bar to open.Left click or tap on the ?Settings? feature you have in the charms bar. In the search box you are presented in the ?Settings? feature you need to write ?Device Manager?. After the search is finished you will need to left click or tap on the ?Device Manager? icon. If you are prompted by a window you will need to type in the administrator account and password to go further with the steps below. Double click (left click) on the ?Sound, video and game controllers? feature in the device manager window. In the expanded menu in the ?Sound, video and game controllers? feature look to see if you have there a sound card and if it is properly installed. Note: if it is not properly installed you will see a yellow sign next to it or you won?t have a sound card present in that menu. If you have a yellow sign next to the sound card you will need to left click on that icon. Left click on the ?Properties? feature after you clicked on the sound card. Left click or tap on the ?General? tab you have in the properties window. You will have a box under the ?Device status? feature and you will see in that box what exactly the issue with... Read more

Read other 1 answers
RELEVANCY SCORE 54.4

After fresh windows 7 install,now no audio but no red cross on speaker icon but orange light on audio mate.

Read other answers
RELEVANCY SCORE 54.4

hi, i think my computer has a quite serious problem, yesterday i tried to install a few programs n maybe one of them contains a virus, when i did the virus scanning, i found there's trojan virus there.
i cudn't open my c: or my documents, and almost all.

i tried to cleaned them up using my antivirus program (AVG 7.5, free ed)
and it works

after that, i tried to do another scanning, and the result shows that it has no viruses anymore,

fyi- before there was 8 file were infected, most of them are from system32

the new problem is, even though i can open all my drives like normal, but the icon of my drive c now has changed into a red cross symbol, as shown in the attachments, "screen"

and when i turn my laptop on, there's a box appears, shown in attachments, "error1"

can u please tell me what is going on with my laptop?
and what should i do?

thanks a lot.
waiting for ur reply
thx!
;p

nessya
 

A:why does the icon of my computer (drive c) is changing to a red cross symbol?

Click here to download HJTInstall.exe

Save HJTInstall.exe to your desktop.
Doubleclick on the HJTInstall.exe icon on your desktop.
By default it will install to C:\Program Files\Trend Micro\HijackThis .
Click on Install.
It will create a HijackThis icon on the desktop.
Once installed, it will launch Hijackthis.
Click on the Do a system scan and save a logfile button. It will scan and the log should open in notepad.
Click on "Edit > Select All" then click on "Edit > Copy" to copy the entire contents of the log.
Come back here to this thread and Paste the log in your next reply.
DO NOT have Hijackthis fix anything yet. Most of what it finds will be harmless or even required.

 

Read other 1 answers
RELEVANCY SCORE 54.4

i have recently purchased a second hand laptop.. in good nick.. everything works..,. and i love it.. the model is hp pavilion dv9000 .. the only problem im faceing is the fact there is no sound.. i can plug in a usb sound device and can listen to music and everything through head phones but i have no sound if i unplug it.. in the 3 weeks ive had it.. twice ive turned it on and its picked the sound up and has worked.. but all of a sudden will cut out and cant find the sound again.. or the other time i re set my laptop and there was no sound again.. ive gone into device manager and there is no section in there with sound or anything remotley to do with it.. obviously i cant download a driver if it cant find the sound.. is there anything i can do?? a laptop with no sound is no problem but it bugs the hell out of me when i click on something i need sound for then i have to go find my usb device and my headphone just to listen to it.. please help me..!
 

A:HELP ME!! i have a red cross in the speaker icon in the bottom right hand corner..

Read other 16 answers
RELEVANCY SCORE 53.6

I can't access Internet, the Wireless icon on toolbar has a red cross trough it. The device IS enabled. When I check the device and run Troubleshoot it tells me it is working properly. The computer is new to me, it looks like it has been configured to access
the internet via another computer. I have tried to reset the computer to its default settings vis System Restore but it will only allow me to go back a year and then crashes just over halfway through the restore. 
The computer is a Gateway Laptop MOD 7320GZ + Windows XP Prof Version 2002 Service Pack 2 + Broadcom 802.11g Network Adapter
Any advice? As you can guess I'm a novice.
James

Read other answers
RELEVANCY SCORE 53.6

Hello,

My Dell-VOSTRO laptop is kinda in a weird situation now with spyware, and hopefully someone can help me fix this. It's been bugging me for the past 3 days. The problem is on desktop bottom right corner, where the volume icon and msn icon are, there is always a round red icon with white cross pops up something like this:

"Your computer is infected!

Windows has detected spyware infection!

It is recommended to use special antispyware tools to pervent data loss. Windows will now download and install the most up-to-date antispyware for you.

Click here to protect your comupter from spyware!"


I know this is a spyare spam try to trick you to install their program and not a real windows warning, so I haven't clicked it yet. but I just can't get rid of it. I've tried quite a few things, but nothing works.

There is also a weird thing is that I can't run HijackThis on this laptop, I even renamed it to "Fumble" as someone previous suggested, but it still won't work. Once you double click on the icon, nothing happens. Therefore, I don't really have a HJT log to post. I did follow the steps to run a Panda virus scan and attached the log. Hope it helps in some degrees.

Someone, please help me on this to get rid of that red round icon with the white cross spyware or let me know what need to be disabled to get HiJackThis running to produce a log for you guys.

Thanks a lot in advance!

A:Trojan/Spyware infected! [Red icon with white cross appear on task bar] Please help!

Just want to give an update, I think the trojan or spyware not only disabled HijackThis to run, it does the same thing for other anti-virus software as well. Kaspersky and Windows Defender neither will start now on my laptop. I tried safe mode too, no luck! I guess online scan is the only way to scan it, which I attached the log in the first post, Please help......guys!

Thanks ahead!!!

Read other 16 answers
RELEVANCY SCORE 53.6

I have a new quick launch icon on the taskbar. It is a red circle with a white cross. There are also pop-up dialog boxes associated with this new icon. These include, "Click here to protect your computer from spyware!" and "Attention! system detected a potential hazard (TrojanSPM/LX) on your computer that may infect executable files. You private information and and PC safety is at risk. To get rid of unwanted spyware and keep your computer safe you need to update your current security software. Click OK to download official intrusion detection system (IDS software)".

I am running the following:
Windows XP Media Center Edition Version 2002 Service Pack 2 on a Dell XPS DXP051. Intel Pentium D CPU 3.00 GHz, 2.00 GB of RAM

At this point, I have disconnected my computer from the internet and have tried to do a "repair" on the OS using the Windows installation CD. Then, I restarted and the red circle/white cross icon was still there. Next, I performed a Trend Micro HijackThis-v2.0.2, and saved the log file. I am currently working off my laptop to troubleshoot this virus/malware. Please help me solve this problem. Thank you.

Here is the HijackThis log file:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 1:55:21 PM, on 1/11/2010
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal
Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\ser... Read more

Read other answers
RELEVANCY SCORE 53.6

Hello, recently here at work we've been having more and more trouble with the "Could not reconnect all network drives" popup when users log on to their computer. All network drives have a red cross on their icon in explorer. It's a wired network.
I've tried enabling the "Always wait for the network at computer startup and logon" policy under Computer Configuration/Administrative Templates/System/Logon in the Group Policy Editor, but this didn't help. Updating the driver for the network card also
didn't help.
Once a user clicks on a network drive it instantly becomes available and stays available until the next reboot. The problem is that users have got programs which rely on having connection to certain network folders. So now they first need to open windows
explorer and click on each network folder to get it connect before they can open their program.
I've noticed users getting this error more and more after changing from 3com switches to cisco 2960 switches.
Anyone any ideas? (Switching back to 3com switches isn't an option)
 
Sincerely,
 
Peter 

A:Red X (cross) over network drive on startup, Could not reconnect all network drives.

Hello, thanks for your help. I seem to have found the problem. The switches are configured for spanning tree, now after changing the port where I'm connected on to use spanning-tree portfast instead of normal spanning-tree the problem disappeared. It
seems the spanning-tree protocol causes a bit of a delay which explains why the network folders don't connect. But it also seems that the GPO
Computer
Configuration\Administrative Templates\System\Logon\Always wait for the network at computer startup and logon.
Doesn't wait for a logical signal because if you read the GPO description I would expect it to wait for a network connection to our domain but it seems it only waits for a signal and not a domain signal, if you know what I mean.
 
Thanks again for your help.
 
Regards,
 
Peter

Read other 22 answers
RELEVANCY SCORE 53.2

Windows 7 32-bit won't play sound.

Device Manager\Sound, video and game controllers\High Definition Audio Device ok.
Double click and window says:
High Definition Audio Device Properties\General: Device status says This device is working properly.

Speakers are plugged in and make a crackle when plugging in to correct holes.

Mystery?

A:Sound/Mixer icon has red cross. No Audio Output Device is installed.

If it's shown as "working properly" in the Device Manager, the speaker icon you have can also be because the sound is muted.

You show "High Definition Audio Device" rather than the actual sound device which suggests you have the generic Windows/Microsoft installed sound driver rather than the actual sound driver from the motherboard vendor. In many cases the generic Windows driver does not work or work correctly.

You can try and uninstall/reinstall by RIGHT clicking on the entry for the sound and then LEFT click "Uninstall" (DO NOT check the box to uninstall the drivers) then restart the PC and when Windows starts it will detect and reinstall the sound. This fixes a lot of flakey problems.

If the uninstall/reinstall does not fix it, the next step is to get the correct sound drivers and install them.

Read other 1 answers
RELEVANCY SCORE 50.4

Hello

I have a wireless home network set up but unfortunately the desktop PC I use for most of my CAD work does not have a wireless adapter and it would be more trouble than it is worth to run a wire to my home office. I am wondering if it is possible for me to have my laptop connected to the wireless network and have a second wired network set up in the office through a router and have the laptop feed the connection to the desktop through the second network. I attempted to google the question but couldn't think of a way to word it, or what the setup would even be called.

Anyways, thanks in advanced

Nathan

Edit: fixed some spelling errors
 

A:Cross Network internet?

Read other 6 answers
RELEVANCY SCORE 49.6

I am having a heck of a time trying to get my laptop ( w2000)
pc to print over the lan to a windows 98se host.

Here is the setup:
IBM T22 Laptop windows 2000
See's the neighborhood shares the dsl.

P3 server pc Windows 98se connected to a Lexmark Z53
Printer.

Steps:
Printers are shared, the IBM can see the network printer and is set for it to be the default but when you print nothing happens ..It sits in Que and says printing and then goes away.

Called lexmark and they said they do not support cross platform printing. Not that it could'nt be done but that they do not support nor tell you how to do it.

Any Ideas?

Thanks

RL
 

A:Cross platform network printing

Read other 6 answers
RELEVANCY SCORE 49.6

Hey guys.

I'm having a problem seeing a shared printer over my LAN. It's shared on a box running XP Pro. Sharing is turned on, and the printer has been "shared." Still no luck looking for it from the other PCs in the office. Any advice?

Part two: I've been trying to see the printer from a Mac as well, with no success. I can see the PC workgroup, and the computer sharing the printer, but I can't log in to it. I can log in to the other PCs on the network by entering the "computer name" as the username, and the administrator password. This particular machine, however, won't let me do that. Any ideas?

Thanks,
Alex.
 

A:Cross-platform Network printers

Although you likely have a lot of this working, the basics for troubleshooting are:

1. Make sure you have the same IP scheme (e.g. 192.168.0.x).

2. Make sure you have the same Subnet Mask, Gateway, and DNS IP addresses.

3. Make sure you can ping the other computer's IP address. If this fails, just for testing, make sure you turn off XP's as well as any other firewall.

4. Make sure you can ping the other computers by name.

5. Make sure you have the same workgroup name (watch for trailing spaces)

6. For troubleshooting purposes, turn off XP's and completely uninstall any other firewall software. You can always add more complexity after you get it working.

7. With XP, make sure you have the same username and password as the person logging onto the other computers. The default setting for XP Pro is to require a password for network access.

8. More details about how to network XP can be found at:
http://www.onecomputerguy.com/networking/xp_network.htm

9. More details about how to troubleshoot TCP/IP networks can be found at:
http://www.onecomputerguy.com/networking/trouble.htm

10. Apply the registry edit to fix the browsing delay from XP to Win9x computers
http://www.onecomputerguy.com/windowsxp_tips.htm#browsing_delay.

There continues to be a lot of misinformation about needing NetBEUI or to changing the NetBIOS setting. You can ignore both. Installing NetBEUI to solve a networking problem will just mask a some underlying and potentially important misc... Read more

Read other 3 answers
RELEVANCY SCORE 49.6

My laptop is connected to a router (DLink DSL 524T) via network cable. Although I could still connect to the net through the router there is a cross shown between the Network and Internet in the Networks and Sharing Center.

This isn't a big deal (since I connect to the internet) but I was wondering why the cross is there? Is there a way I could get it off?

P.S. - I've attached a screenshot of the networkd and sharing center in case my explanation was a bit confusing

A:Why is a cross shown between Network and Internet?

  
Quote: Originally Posted by RustiX


My laptop is connected to a router (DLink DSL 524T) via network cable. Although I could still connect to the net through the router there is a cross shown between the Network and Internet in the Networks and Sharing Center.

This isn't a big deal (since I connect to the internet) but I was wondering why the cross is there? Is there a way I could get it off?

P.S. - I've attached a screenshot of the networkd and sharing center in case my explanation was a bit confusing


Can you click on "see full map" on that screen and make a screenshot of it?

Greetz

Read other 7 answers
RELEVANCY SCORE 49.2

This happens after I tried to install a bluetooth software. It failed to work as described so I uninstalled it. Now my network notification icon is always a red cross. But when I hover my mouse over it, it says I have internet access. And of course I do.

Thank you.

A:Network notification is a red cross when I'm connected to wifi

Some progress...

I followed an instruction of sb who had similar problem (not exactly the same), so I uninstalled all my network card (but drivers), I restarted my computer. Now the red cross becomes a "Network available" status (signal bar with a yellow flower) when I have already connected to my wifi, when it should have been white signal bars (connected status).

I dont know if it is some progress or what?

Read other 5 answers
RELEVANCY SCORE 49.2

Hi,

Im about to leap in combining our macos and windows networks but before i jump in and muff things up, is there anything i should know? The macos network has all 9.2 clients and the windows network is just a server back-bone built up of many windows 2000 servers. All the macos clients need to do is connect to the one domain controller, and use the file-server faciliries.

Cheers,

Elfyn
 

A:Windows 2000 in cross-band network

Excuse our ignorance, but what is a Macos network. Is that a proprietary NOS, UNIX LINUX, DOS? With a little more info, there are many experienced gurus in this site that can be of help.
 

Read other 3 answers
RELEVANCY SCORE 49.2

I successfully configured a two-PC Ethernet network linking a Win98 system with a WinXP system via a cross-over cable. Then I somehow configured the Win98 system to access the WinXP's dial-up internet connection. The Win98 shared the WinXP's dial-up connection fine and the network worked great.

Now I have broadband (DSL) on the WinXP which utilizes a Zoom ADSL X4 5651 unit and is attached via USB. The back panel of the 5651 also has an Ethernet port.

So I attempted to configure the Win98 system to access the WinXP's broadband connection and no soap; didn't work. I tried BOTH the existing network setup and then a direct connection linking the Win98 from its Ethernet port to the Ethernet port of the 5651 with the cross-over cable, and neither worked.

The 5651 instructions claim a second computer CAN share the internet connection via Ethernet if the main system uses the USB port. And like I said, the main system (WinXP) does use the 5651's USB port. So I'm thinking that my problem stems from the fact that a cross-over cable is different from a regular Ethernet cable.

So, two questions:
1) do cross-over Ethernet cables differ from "regular" Ethernet cables, and more importantly
2) can I configure broadband sharing via the cross-over network I've created like I had with my dial-up connection?

Thanks in advance.
 

A:Broadband sharing over cross-over cable network?

Oops! Should'ave posted this in "networking" so I did.
 

Read other 1 answers
RELEVANCY SCORE 49.2

I successfully configured a two-PC Ethernet network linking a Win98 system with a WinXP system via a cross-over cable. Then I somehow configured the Win98 system to access the WinXP's dial-up internet connection. The Win98 shared the WinXP's dial-up connection fine and the network worked great.

Now I have broadband (DSL) on the WinXP which utilizes a Zoom ADSL X4 5651 unit and is attached via USB. The back panel of the 5651 also has an Ethernet port.

So I attempted to configure the Win98 system to access the WinXP's broadband connection and no soap; didn't work. I tried BOTH the existing network setup and then a direct connection linking the Win98 from its Ethernet port to the Ethernet port of the 5651 with the cross-over cable, and neither worked.

The 5651 instructions claim a second computer CAN share the internet connection via Ethernet if the main system uses the USB port. And like I said, the main system (WinXP) does use the 5651's USB port. So I'm thinking that my problem stems from the fact that a cross-over cable is different from a regular Ethernet cable.

So, two questions:
1) do cross-over Ethernet cables differ from "regular" Ethernet cables, and more importantly
2) can I configure broadband sharing via the cross-over network I've created like I had with my dial-up connection?

Thanks in advance.
 

A:Broadband sharing over cross-over cable network?

Read other 15 answers
RELEVANCY SCORE 49.2

Hi,

I have a small multi platform home network that I am trying to expand by the addition of a NAS server. I have an iMac 1TB running OS 10.8, a Windows 7 laptop 500 GB and 2 iPads operating over a wireless network with a Netgear DNG2000v2 router, currently using an Iomega 1TB Media Drive for back up. The new NAS is a LG N2A2 2TB which I have initially set up with RAID 0. My aim was to use the NAS as a central cross platform file server while synchronising files with the iMac as back up, allowing cross platform and remote access to files. I generally use iTunes for Media and Picasa for my Photos.

This is probably a straightforward bread and butter problem for network designers but my Internet research seems to be getting me more confused than illuminated.

Is there a way to backup the computers to the NAS while also allowing cross platform synchronisation, file sharing and remote access.

From what I have discovered Time Machine should be avoided because of its expansion to file the external disk size. Synctoy is not OS X compatible.

As the Windows and Mac file structures are fundamentally different what is the solution to this anomaly. Does the solution require proprietary software.

As I have 1TB of data to transfer I would like to get it right from the outset, I would be grateful for some experienced guidance or direction to a suitable source.

Thx
 

Read other answers
RELEVANCY SCORE 48.8

from device manager network controller is yellow
this is windows 7 64 bit
dell latitude e6410

tried to install below drivers , all of them did not install need help
Network_Driver_WD35F_WN_5.100.235.12_A37.exe
Network_Driver_3MNPT_WN_15.10.0.10_A06.exe
NIC_DRVR_WIN_R254689.exe

A:wifi icon is red cross, also wifi light on laptop does not show up

Hi Welcome to Seven Forums ... Select the Network Controller Right click select Property's ...

Then the Details Tab and Post any Info it says there ...

Read other 9 answers
RELEVANCY SCORE 48.8

Hi, i've a problem with network connection. If i connect my laptot by nic to a switch it works correctly. Otherwise if i connect it to a host directly my nic doesn't cross automatically. My old laptop did it!! Could someone help me? Thanks

Read other answers
RELEVANCY SCORE 48.4

It's very odd. It just appeared the other day and I have no idea how I caused it. Usually that means no output device detected, but it is detected and sound works.

Hovering over the sound icon it says:

Volume: 100
Speakers
Realtek High Definition Audio

The volume control won't display.
 

Read other answers
RELEVANCY SCORE 48.4

Hey Guys,

I removed the AC Power cable for a split second (battery was 100% at the time) and my computer just shutdown.
I replugged and rebooted and now I've got a "red cross" next to the power icon in my system tray (see attached image)

If I put the mouse over it - it just says "Fully Charged 100%" and shows my current power plan; which is "high performance" and been using it since I got the laptop.

I'm running Windows Vista Home Premium on my HP Pavilion DV5.
Computer's about a year old now.
I've update all my drivers and checked Device manager and there are no errors/warnings for anything battery related.

Any suggestions on how to get this fixed or what the problem might be?

A:"Red Cross" on Power Icon + Shutdown when AC Power removed.

Your laptop is not detecting your battery. Try removing the battery, and putting it back in.

You might have to buy a new battery.

Read other 1 answers
RELEVANCY SCORE 47.2

Ok, this just happened recently and I don't know what is causing it. I'll try to give u a brief overview of the situtation I'm in. XP used to be on my D driver (74gigs), it got screwed up (BSOD) at the time, I didn't know as much computers, so I installed XP to my C driver (4 gigs). This has worked pretty fine up until when SP2 was released. I can't install SP2 because XP takes up about 4 gigs by itself. Without SP2 I just have been running some extra firewalls so compensate.

Well about 4 days ago, I noticed whenever I open up my computer it takes like 7 or 8 seconds before the hard drivers appear. Then I went into network connections to look at my internet icon (to check the settings). I opened it up and nothing was there. The only thing there was on the far left it was asking me if I wanted to setup a network ( my internet is working on all the computers). I have ran 2 different spyware scans and found nothing, ran mcaffee scans and nothing. I can't restore my computer because all the restores got deleted when I was trying to free space on my drives.

Where do I go, usually I can solve tech problems but I mean this is beyond weird? What do I do first, if you need more information just ask because I really need some advice.
 

Read other answers
RELEVANCY SCORE 47.2

This is a problem that started with the last windows update (which included an update for my wireless network adapter which I have since rolled back).

My setup is as follows: I have a dual band router. The 5Ghz band's SSID is (for example) Testg and the2.4 Ghz band's SSID is Testg2.

When I click on the network status icon and hover over the Testg connection, it shows the SSID as Testg2. When I go into the Manage Wireless Networks and open the properties for this connection, it shows the SSID as Testg.

I have fooled around with renaming the connections as all of a sudden one showed up as Test 2 3 with the SSID of Testg

Currently I have three connections listed in manage networks: Testg, Testn, and Test2. Testg and Testn (Testg was previously Test 2 3 renamed Testg) and Testn (previously named Testg renamed to Testn so I could rename Test 2 3) both show the SSID being Testg. The Test2 connection shows the SSID of Testg2.

Looking at this information by left clicking and hovering over the connections on the network status icon, they show as follows: Testg shows an SSID of Test2, Testn shows an SSID of Testg, and Test2 shows an SSID of Testg2.

Why is the SSID different for the same connection depending on where I look at it and is there a fix for this?

Thanks.

bruce

A:Network status icon and manage networks icon show different SSID

Well, due to other issues (thank you Cnet download for installing all kinds of malware on my computer with the program I was trying to get), I had to use a system restore to get rid of something that took over my computer and it also fixed this issue. I used a restore point from before the Windows update that I installed.

Read other 1 answers
RELEVANCY SCORE 46.8

As you can see, it's not very smooth. The white curved lines have bluish spots inside. When I first installed Windows 10 on a virtual hard disk (vhd), nvidia drivers for my gtx 760 installed automatically by Windows 10 and the icon was very smooth. Later, I had to do a fresh install of Windows 10 on a Samsung Evo SSD and this time, it didn't install my graphics card driver automatically, I had to download it from nvidia's website. Anyway, how can I improve the look of this icon and make it smooth?

Read other answers
RELEVANCY SCORE 46.4

It just occurred to me that there are many of us that work on one platform on our desktop, but different on our phones or tablets.

Does anyone know of any source for lists of applications that can utilize the same data on each environment? I am thinking that a good cross reference would be good to help us select applications on each environment and if some resource became popular enough, it could lead software vendors to support a variety of data formats in each environment they support, or provide import/export capabilities to support those of us who use multiple platforms.

My personal preference is to use open source or free/inexpensive software, but the need becomes greater when tools in those realms don't exist.

If nobody knows of an existing source, I think I might start something... A listing of programs that can share files for two or more of the following platforms would be a start:

Windows Desktop
Windows Metro (or whatever they are calling it)
Android
IOS
Linux

In my mind, a program would be included if any of the following applied:

a) Versions exist for multiple platforms
b) Works via web
c) Works directly with files from an app on a different platform
d) Exports files to standard formats for use by others (comma delimited, xml, JSON etc)

My personal ideal would be to have an app in each environment I use that exploits the interface of that environment well, and shares data transparently with an app on one of my other devices. For me, I also want apps that ... Read more

Read other answers
RELEVANCY SCORE 45.6

ever since my last factory restore my network icon shows i am in a local access only but i have access to the web, like right now i am on this forum but my computer says i only have access to the internal network. i asked this question in the newsgroup and they said to make sure the services for the network were put down as automatic and that they were started, this is the reply i got:






Double check to make sure that you have the have the Services "Network
Connections", "Network List Service", "Network Location Awareness", and
"Network Store Interface Service" set to Started and Automatic. If these
are not, then it can cause the Network icon to not function properly.

http://www.vistax64.com/tutorials/59910-services.html

Hope this helps,
Shawn



well he was partially right, there was something not running and one of them was manual. but it still does the same thing, hope someone can help me. also it seems to occur mostly when my aircard is connected, it is pcmcia btw. it is from t-mobile and i disabled the wifi antenna on the air card since my laptop already has one and it (aircard wifi) is being a pain because it is trying to connect even tho my laptop antenna is connected, which it's why it is disabled.

edit: my apology i wasn't aware that the newsgroup and forum where interconnected but the issue is still not fixed, hope someone else has an idea

A:network icon taskbar icon not showing right

*bump* no one can help me further?

Read other 2 answers
RELEVANCY SCORE 44

I have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.

Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.

My internet connection is working and has no issues.

What can this be?

Network and Sharing Center - Open
Network and Sharing Center - Open and refreshed


Network and Sharing Center - Closed

A:Correct Network Tray Icon - Requires Network and Sharing Center Open??

That will probably be your Ethernet connection, not your wireless adapter, you can disable it in the bios if you don't use it.

Read other 3 answers
RELEVANCY SCORE 44

So guys, I have been having this problem for several days.
One day, I noticed that my wireless internet icon was gone from the taskbar.
I thought, that's easy, I'd set it to show from Network Connections.

However, when I went to Control Panel, Network Connections would not open, no hourglass or anything. Nothing.

So I went to services.msc, and sure enough, Network Connections was disabled. I set it to Manual and tried to start it. I got the error "Could not start Network Connections on Local Computer. 193: 0xc1."

This is bringing me down, because I've searched for an answer online for days, nothing worked.
I tried using regsvr32 to register netshell.dll, but I got the error "netshell.dll was loaded but the DllRegisterServer entry point was not found. This file cannot be registered."

I have Windows XP Home Edition SP 2.

I have scanned for viruses with avast! Home Edition, found nothing.

And very surprisingly, I still have internet. But I travel, so I need to choose my wireless networks, and this way, I can't. Thank you in advance for any help.
 

Read other answers
RELEVANCY SCORE 43.6

computer is intel, Msi
B75MA-E33,

all drivers are installed, and re installed.

I put in a new graphics card, and all of a sudden , it has stopped working.
I am using a wireless adapter and turned wireless on my modem to use the internet.

I prefer wired internet from the ethernet cable though - this has "broken"

Read other answers
RELEVANCY SCORE 43.6

I am connected to the internet, but there is a red x on my network icon (yet when you hover over it, it says internet access.) I tried to go into the network and sharing > change adapter settings, yet the Network connections folder is COMPLETELY blank.

I tried reinstalling the driver. Initially, I get a message that says "the parameter is incorrect" Although, I tried to do it a second time, it said that the driver is up to date.

I dunno what else to do. I'd like to have access to my LAN connection. I'm running Win 7 Ultimate x64.

A:Network Connections Blank - Red X on Network Icon- but Internet works

Well, after 3 hours of trying to find a solution, I immediately found it after creating this thread. Sorry!!!

Anyway, the solution was to open the registry editor, go to: "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Network" and delete the “Config” value. I restarted my computer, and all was well.

Still wondering: why did this happen in the first place?

Read other 2 answers
RELEVANCY SCORE 43.6

I'm preparing a laptop for transfer to someone else and have deleted all my network accounts (wireless) in the Control Panel. But over in the Sys Tray, when I click on the network icon, my two connections are still listed (name and name-guest). How do I delete those? Win 7x64. Thanks,

A:Deleting my own network connections listings (sys tray network icon)

When you click on the network icon in the System Tray, it will always list all of the Available Wireless Networks in the area, including those of your neighbours if their signal is strong enough. However, if you've already deleted your own networks in Control Panel, the computer won't be able to connect to them again until the encryption key is re-entered.

Read other 3 answers
RELEVANCY SCORE 43.2

Hi!

I seemed to have this problem for a long time. I am a little experienced with problems and programming, so if you could post pictures in the steps provided, it would make it easier for me!

The network icon displays a red X symbol and an ethernet cable symbol with a computer screen symbol in the background. I'm currently connected to a wireless network (on Windows 7 Home Premium x64), and the notification box shows that I'm connected to the network properly, but the icon itself shows that I'm disconnected. I have tried to fix this problem by uninstalling and re-installing some wireless adapter drivers (Microsoft Virtual WiFi Miniport Adapter, VirtualBox Service - I think that caused the problem, and Virtual WiFi Filter Driver), I tried to clear the icon cache in the registry, and I used the troubleshooter for the Network and Sharing Center.

I don't know what to do now. Help would be appreciated. Thanks!

A:Network Icon Displays a Red X but I'm Connected to a Wireless Network

Hi welcome to 7F

that icon showing because you do not have an ethernet cable plugged into laptop.

Read other 4 answers