Over 1 million tech questions and answers.

Display problems with Belkin Hi-Speed USB Dockstation

Q: Display problems with Belkin Hi-Speed USB Dockstation

I am attempting to dock an Acer Aspire 5723Z laptop running Windows 7 64-bit into the Belkin Hi-Speed USB 2.0 Dockstation Model # FSU216 which the supplier provided with the laptop as being compatible.

When the devices are connected, the (Edge10 GB19XX) monitor display switches off when I close the laptop. The screen resolution does not always readjust.

In Devices in Control Panel under Unspecified it says IEEE-1284 controller USB hub ? ?Needs troubleshooting?.
If I right click and click ?troubleshoot? it says the driver is not installed. When I click ?apply this fix? it tells me the driver was not successfully installed. If I click ?skip this fix? and then ?view solution? it says ?a solution is not available for this problem.?
When I originally attempted to install the drivers from the disk I got an error message that it did not have permission to copy a particular file. I tried to uninstall the device a number of times. Each time I went back though control panel afterwards, it asked me again whether I wanted to uninstall the device, which implied that it had not been successfully uninstalled the previous time.

Belkin claim they don?t have drivers for Windows 7 64-bit - only for Vista 32-bit.

Does anyone know a way to get these devices interoperating so that the display works properly?

If not, does anyone know of a docking station which will work OK with this laptop/OS?

Regards Keith

RELEVANCY SCORE 200
Preferred Solution: Display problems with Belkin Hi-Speed USB Dockstation

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Display problems with Belkin Hi-Speed USB Dockstation

Wow. Except for the model number on your laptop, you and I have exactly the same problem with exactly the same docking station--the VGA support for Win7/64. I got around it by using the HDMI port on my laptop and hooked in a small HDTV I wasn't using. Does your device support HDMI? It's one way around the problem.

Also, have you been able to get your printer to work via the parallel port? Mine won't send the page to the printer.

Read other 1 answers
RELEVANCY SCORE 75.2

I just purchased a Hi -speed USB 2.0 Dockstation by Belkin. When using the install disk to install drivers I recieve the following error message
"an installation support file C:\leslie~l\locals~\temp\{EB145CEA-998F-4C9DAEF7-B4DBBD217DAF}\lsrt.dll could not be installed. Access is denied.

Can anyone help me with this problem???
 

Read other answers
RELEVANCY SCORE 67.2

I just want to know if I'm the only one with this problem.  I have the latest update/firmware installed. Something when I browse the web, or change rapidly from one application to another (ex : Web to Word) The screen turn black for 1 sec.   It doesn't always happen, but enough times that I starts to bother me. The display is connected on the dockstation by a DVI or dualport connector (don't remember).  My monitor is a Dell.

Read other answers
RELEVANCY SCORE 51.2

Anyone out there help...... does a usb high speed hub have to be connected to mains electricity to make it work with a usb 1.1 port at optimal speed?
Thanking you in anticipation of reply
 

A:Belkin 4 port High Speed USB hub

It is a powered hub so it has to be connected to power to work at all.
 

Read other 1 answers
RELEVANCY SCORE 50.8

I've had my belkin wireless router/adapter for a while now and it hasn't ever had a very good connection. the signal strength has been like less than 10%. Is there anything that I could do to boost the signal strength? I've tried moving the router around and the adapter around but to no prevail.
 

A:Belkin wireless Router connection speed

Gfunk200 said:

I've had my belkin wireless router/adapter for a while now and it hasn't ever had a very good connection. the signal strength has been like less than 10%. Is there anything that I could do to boost the signal strength? I've tried moving the router around and the adapter around but to no prevail.Click to expand...

I have Belkin WAP in my living room hidden on top of the Grandfather clock. Getting it up high helped a lot. The biggest help is keep anything, and every thing away from it no matter what it's made of. Anything in proximity of the antenna(s) will detune them and they will suffer for it. Some free ideas for improving antenna perfomance can be found here...freeantennas.com HTH
 

Read other 2 answers
RELEVANCY SCORE 50

I am using belkin N300 router, My bro wastes time too much time/net on youtube,
So i wanted to limit the internet speed through wifi modem setting, but i couldn't find any setting for that.
can any 1 who knows or owns this modem can tell me how to?
Thanks
 

Read other answers
RELEVANCY SCORE 49.6

Argh!

I have a Belkin wireless router (F5D7230-4), a Buffalo Linkstation 250, and a new Dell Dimension 9100 with XP-home and plenty o' RAM. Everything mentioned is directly cabled together, with only 1 laptop sharing the wireless access.

EVERYTHING is fast--internet, processing, whatever--except transferring files to the Linkstation, which takes forever. 400 megs took 18 hours the other day (!). Furthermore, if I start to transfer a bunch of MP3s, the first 5 or 6 will FLY, but then it just grinds to a crawl. If I'm just browsing the contents of the Linkstation, the speed is fine; playing an MP3 directly from the drive works fine as well. And if I hook the Linkstation directly into my network card, it runs like greased lightning, so I assume it's a router issue.

All firmware is updated. No firewalls on. Protected mode is off. Frame bursting is on. NAT on. UPNP on.

Does anyone have ANY suggestions for me? I couldn't find any other posts that seemed to address my specific issue, and it's driving me nuts...! Thanks in advance!
 

A:Belkin wireless router + Buffalo Linkstation = slow speed

Read other 16 answers
RELEVANCY SCORE 49.6

Hi all,

My Belkin N300 wireless router is now experiencing intermittent slow Internet speed. The router is 2 years old and has worked perfectly until last week.

Here are the troubleshooting steps I completed.

Internet speed test when directly plugged into the wireless router and cable modem: 30mbps
Internet speed using laptop wifi: 2 mbps then sometimes works at normal speed
Called ISP and they verified there was a connectivity to cable modem issue. Did a power cycle for modem and router. Then got full 30mbps from cable modem to ISP using direct connect to laptop.
tested other devices such as laptops and tablets, all experiencing intermittent slow speed
when experiencing slow wifi, switched to direct connect ethernet cable to router and got immediate full 30mpbs

So far all my testing is pointing to the Belkin router's wifi connectivity. I will check on the router's firmware since it has never been updated.
I also found a thread online suggesting disabling QOS on the router. But this should not be needed as it was working fine for two years since its purchase.

Any suggestions to what else I can do to resolve this issue?
 

Read other answers
RELEVANCY SCORE 49.6

Hi ,
I've been having this problem with my Belkin router since day 1 when i got it.( not new, got from buddy's place)
It's Belkin HI Speed Wifi G router, and what's really frustrating is, everytime i connect to it, I need to manually change the DNS address and switch between 4.2.2.2 & 4.2.2.4 in order to get internet access!
Sometimes it even cuts off the internet during a session, without me even disconnecting from the wifi network, where I would again need to switch back and forth to the 2 or 4 ending! It s been months and found no solution ! .. can someone drop me some hints please .. would highly appreciate your help ! thanks

Francoi
 

A:Solved: Belkin HI Speed Wifi G router: Always needs manual DNS change

sorry im not the most advanced on this but do you have an option to set it to obtain automatically?
 

Read other 3 answers
RELEVANCY SCORE 49.6

Hi,

I need a help to resolve one issue with my Belkin router F7D4402 v1. I have got it recently and configured it without any issue and my internet (ADSL) was up and running. However, later I have noticed that, my internet speed is limited to 1.5 Mbps. whereas; the speed I was getting on my old Linksys WAG200 router was minimum 2.0 Mbps.

I have tried to disable the QoS and other options but no use. But when I enabled the Mac cloning it worked fine. I was getting the speed I subscribed for, but unfortunately, the other devices on my Wi-Fi stopped working. With Mac clone enable, the internet is only available to my PC.

I need the internet on my PC plus all the Wi-Fi devices in my house and along with it my full internet speed, not just 1.5 Mbps.

Can anyone please help to fix the issue?

Thank a lot.
 

A:Belkin router F7D4402 v1 ADSL speed is fixed to 1.5 Mbps

It's not the router - - you up against the limit of ADSL.

see this description
 

Read other 1 answers
RELEVANCY SCORE 49.2

hi i have had the Belkin ADSL Modem with Wireless-G Router for a while now and have had a tesco's 2.2mbs connection but i have just upgreaded to a tiscali 8mbs connection, i no i can get the full 8mbs speed through the supplied modem but am just wonederind if the Belkin ADSL Modem with Wireless-G Router's buitl in modem is fast enogh to get the full 8mps or if it wil run slower. would be great to no i was just wondering
 

A:Belkin ADSL Modem with Wireless-G Router WHAT IS ITS MAX INTERNET CONNECTION SPEED

There THe belkin modem/gateway shouldnt limit your speed capabilities. You should be able to find the speed listed inside the modem's status page. To do this..
Click start>run>In run type CMD
In the black window type IPCONFIG and then enter. Note down your default gateway.
Open a browser window and enter the gateway's address into it. Click go
This should take you to your gateways graphical user interface.
Look for a status tab or see if it lists connection speeds on the general page.

Also you can test speeds at different sites. Google search broadband speed test and choose 1 of the millions of sites
 

Read other 2 answers
RELEVANCY SCORE 48.4

I Have a Belkin 5D9230-4 wireless Router.

I have been trying to set this up and when I type in the router address 192.168.2.2
I get The message at the bottom of the screen Connected To 192.168.2.2
But no display on screen
any one help me please.
 

Read other answers
RELEVANCY SCORE 48

Hello. I'm a novice at this. Have connected my main desk top successfully to broadband internet via Belkin Wirelss G Router and Belkin Desktop Network PCI Card. Cannot get second desk top to connect to broadband intenet. Appears to be connected ok to the router but not to the internet. Would appreciate any suggestions as to where I might start looking.
 

A:Problem networking via Belkin ADSL Modem with High Speed Mode Wirelss G Router

USUALLY, you wire the system to the router first and configure the router
to access your ISP. Typically, you use your bowser to access 192.168.0.1 and log-in to the device.
Once that is working, you enable the wireless feature, set the SSID and your security keys.
Now your ready to configure the desktop to use the wireless.
 

Read other 1 answers
RELEVANCY SCORE 47.6

My P71 laptop is not chargin with my Dockstation 230W

Read other answers
RELEVANCY SCORE 47.2

Fellows, I made the update from W7 for the W10 recently, and in the meantime I wasn't using the dockstation, now, I need it but, none of my dockstations are charging the battery, there's no drivers missing, the power cord isn't the model with problem, I all the solutions on the web doesn't work. Any help to solve this issue? Thanks,Leandro.

Read other answers
RELEVANCY SCORE 46.4

Hi from Girona,     I just buy a new Elite X2, and a offcial DockStation.      Everything works, excepts External Screen that it's conected via RCA cable to Dock...      I found this Advise (http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c05250839&sp4ts.oid=8741943) and do everything, but nothing changes.... Any help? Thanks in advance

Read other answers
RELEVANCY SCORE 46

Probably it is not possible but I will ask anyway.
My laptop (Dell Inspiron 15) stands on cooling pad, which is connected on the D3100 USB port. If I turn of the laptop the fan in cooling pad turns off. But after a few seconds fan starts to work again as D3100 has its own power source. So I also have to disconnect D3100 from the power or disconnect cooling pad from the D3100 to turn off the fan in the cooling pad.
Is there anyway to tell D3100 to turn off power from USB ports when there is no connection with laptop?
And of course I could connect the cooling pad to the laptop. But that is what D3100 should be for.

Read other answers
RELEVANCY SCORE 46

Hi,I would like to buy a Spectre x360 13-ac004nf and use it with a docking station and 2 external 27" monitors (2560x1440).I read that the doking sation is not able to provide power to the laptop.But, will it work if I plug the power spply in one USB-C 3.1 and the docking station to the other USB-C 3.1? Subsidiary question, will the laptop/dock support 2 external monitors 2560x1440? Thanks,

A:dockStation Elite X7W54AA with Spectre x360 13-ac004nf and d...

I guess I would like to see the dock but yes if you use the provided laptop power supply in one USB-C and then connect the other to a USB-C (Thunderbolt) port replicator (dock) with a pair of DisplayPort or HDMI ports it will drive two UHD monitors just fine. 

Read other 1 answers
RELEVANCY SCORE 45.6

My Laptop is a R700 with a dockstation. Windows 7 x64.

If a I starts laptop docked, can see on external monitor and integrated lcd.
If I star undocked, starts windows and lcd turns black. There is out to external monitor if I connect one, but not lcd correct out.

Swtiching function keys doesn?t works, like if undertand lcd is correct (but there is only a black lcd).
Updating until last version of video and switching version (aug2012) we obtain the same result: black lcd.

If uninstall video driver and set the vga standard driver works ok, but ther is no switching function key to use external monitor.

Is anyone there with same proble?

A:Portege R700 and dockstation, Integrated screen starts black

If the video signal has been set to external monitor using Fn + F5, then you have to use this key combination again in order to switch back to the internal screen?.

Read other 2 answers
RELEVANCY SCORE 45.6

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 32 bit
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+, x64 Family 15 Model 107 Stepping 1
Processor Count: 2
RAM: 1917 Mb
Graphics Card: NVIDIA GeForce 6150SE nForce 430 , 128 Mb
Hard Drives: C: Total - 333693 MB, Free - 268837 MB; D: Total - 9703 MB, Free - 2167 MB;
Motherboard: ECS , Iris8, 1.0 ,
Antivirus: Sunbelt VIPRE, Updated and Enabled

I'm having a problem with my download speeds. I don't have an ultra high connection, just 1.2 mb/s. My speed tests confirm that is exactly what I'm getting, but when I actually download something , it goes to 155kb/s and will go no higher. I've contacted my ISP and they say it's my computer. The speed test is showing what it should but I just can't get past 155. I've ran several malware, spyware and virus tests and they all come out clean. I'm at the end of my rope. Don't have a clue what to do next to get my speed up. This is what shows on IPCONFIG/ALL
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\David>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : David-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connect... Read more

A:Actual download speed problems but good ping and speed test

Read other 10 answers
RELEVANCY SCORE 44

I have just installed a belkin wireless router, but now i cant sign into msn messenger, it says a firewall is blocking it although windows & mcafee firewalls are turned off, I can only think it has something to do with the router firewall, but I dont know how to do it, any ideas please?

many thanks
 

A:Belkin Problems with msn

use split halves to prove the router is your problem.

disconnect it and cable the system directly to the modem and reboot the system. if msn is still blocked, then it's your firewall and not the router
 

Read other 7 answers
RELEVANCY SCORE 44

Hi all
recently Im having problems getting on to the net, and have to pull the mains on my router, once or several times, sometimes its not recongnising the adaptor, and this seems to fix it anything I can do , thanks
james

Read other answers
RELEVANCY SCORE 43.6

Hi Guys

Does anyone have experience with the Belkin Switch2 device - I think it is called a Belkin Flip in the U.S. ? It is a device that lets you plug one mouse, and one keyboard (both usb) and one monitor (vga) into two computers. You can then flip control from one machine to the other at the touch of a button.

I have a home PC running Windows XP home edition and an ATI Radeon graphics card driving an iiyama monitor via the ATI Catalyst control software settings. My seconf machine is my employer's laptop - a brand new Dell Inspiron running Windows XP professional.

The Belkin unit is brand new and is working fine on both the PC and the laptop - especially the laptop (no problems at all) once I go through a strange rutual at start up of the home PC which totally defeats the object of being able to automatically switch control to the monitor, mouse and keyboard.

The issue is that everytime I boot the PC (XP home edition) from cold (not a warm reboot which works okay), XP starts up and gets to the "click here to login" stage and shuts down instantly without any reason given. It just says "Windows is shutting down". To get around the problem, I have to disconnect the Belkin from the VGA input socket and plug the monitor into the PC vga socket directly and do a reboot. This starts up perfectly without problem. Then if I unplug the monitor from the vga and plug it into the Belkin (and plug the Belkin into the PC vga socket) everything works great and I... Read more

Read other answers
RELEVANCY SCORE 43.6

I have a wireless network set up with a Belkin F5D7130 802.11g router, Netgear network adapter and using Verison DSL.

This setup has worked more or less ok over the last month since I set it up. Yesterday, however, I could not detect my router (no SSID showed up). I've tried restarting the router and DSL modem and rebooting my computer. Nothing seems to work. However, my SSID did show up briefly and I was able to connect for about 2 minutes before it disappeared again.

I can get on to neighbor's networks which suggests that the network adapter is not the issue. Anyone have any suggestions?
 

A:Belkin Router Problems

this may help. quoted from www.chicagotech.net.

Losing the connection to the Belkin router after making some changes on the router or reset.

Resolution: Re-set to default settings.
 

Read other 2 answers
RELEVANCY SCORE 43.6

Hi,

After much deliberation, i bought myself a belkin Wireless Cable/DSL Gateway router and 2 Wireless PC Cards for my home network. I tried installing the drivers for the gateway, and it couldn't find it. So I tried the alternative method. It said to open up the web brower and type '192.168.2.1' to access the settings of the router.... it couldn't find it also.

I have tried almost everything possible; new cables, changing IP and subnet mask addresses but nothing seems to work.

Does anyone have any ideas at all on how to access this settings page on the router itself?

Thanks very much in advance,

Dayne

** The 3-step quick install instructions make it look so easy
 

A:Belkin Router Problems

First off, to access the router's configuration page, you need to use a wired connection, the wireless connection won't do it.

If you have a CAT5 patch cord connected from a NIC on one machine to one of the LAN ports of the router, try the following:

- Set TCP/IP properties to obtain IP and DNS addresses automatically.

- Reboot and try the web browser with 192.168.2.1 again.
 

Read other 2 answers
RELEVANCY SCORE 43.6

Hello my problem is router belkin n-450 modem westell 6100 on windows vista.All lap tops work fine wireless but pc not connected to pc.IPV4 LOCAL IPV6 LIMITED.Router and modem are working together as they should just can not connected to the hp computer.Any guesses to what it could be.
 

A:Solved: Belkin n-450 problems

can we see the following information from the HP

what wireless security are you using ?
you may want to log into the router and remove the wireless security and see if the HP now connects
------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

ipconfig /all > network.txt & network.txt

It will export the results to notepad and then automatically open notepad.

Now all you need to do is copy and paste those results to a reply here
to do that:
From the notepad menu - choose Edit - Select all
all the text will be highlighted
Next
From the notepad menu - choose Edit - Copy
Now go back to the forum - reply and then right click in the reply box and paste
------------------------------------------------------------------------
------------------------------------------------------------------------
Run Xirrus Wi-Fi ... Read more

Read other 1 answers
RELEVANCY SCORE 43.6

Hello.

We used to be connected with Tiscali until a couple of months ago. When we were with Tiscali we were using a Belkin F5D7632-4 Wireless G router and, ok, so it kept dropping out, but we had wireless connection which was great.

When we changed to BT we were sent a BT Voyager 220V ADSL router which is connected at the moment via USB connection to the computer. When we try and plug the Belkin in we can't get a conenction to the internet, let alone have anything running on Wireless.

The signal speed is only as much as 512K on a good day .. but is that any reason why we can't get any sort of connection (wired or wireless) on the Belkin ?

Can anyone suggest another wireless router that may be better? I have an old BT Home Hub (the white one) - Is it worth trying that ?

Any advice would be appreciated
Thanks

A.
 

A:Belkin Router problems

First off, you may have to configure the WAN section of the router with the proper parameters for the new service.

Also, there's this...

http://www.pcadvisor.co.uk/forums/index.cfm?action=showthread&threadid=228171&forumid=18

I would just like to warn anybody who owns the v2000 vesrion of the belkin F5D7632-4 adsl modem router to be extremely cautious in updating their firmware to the latest 1.01.10 version which has recently appeared on the official belkin website.

When I updated to the new firmware it completely ruined the wireless connectivity of my router and as a result I had to replace the router. I also contacted belkin technical support but they could not offer a solution.

I would therefore suggest that any F5D7632-4 v2000 owners do not update their firmware as it could kill the wireless connectivity of their router. It could have just been that I was unlucky but I would strongly advise against a firmware update.Click to expand...
 

Read other 1 answers
RELEVANCY SCORE 43.6

I have a desktop and in the distance in the same house a laptop, both on W7. I'm trying to connect the laptop to the internet via a Belkin Powerline. Sometimes it works but not always. I've consulted Belkin who have come to the conclusion that there is no facility on my computer to set up a LAN (it does not show in the list of option in Network and Sharing Centre). I'm mystified because why does it work sometimes but not others, and why does my laptop not have this facility anyway?

A:Problems with Belkin Powerline and no LAN

What EXACT option are you missing?

Belkin Powerline is connected to laptop using a network cable.
The other Belkin Powerline is connect to router using a network cable.... correct???

Please connect another laptop to the powerline... same problem?
Connect the laptop directly to the router using a network cable... same problem?

Read other 9 answers
RELEVANCY SCORE 43.6

I have a problem with my belkin router whereby the internet stops working and all internet applications like my online gaming stop working. However my wireless displays working properly.

If i use belkins network utility it displays wireless network working and internet to router displays off.

I solve the problem by going to my router page and commanding my router to restart.

Before I used the Belkin router I used the 02 router that came with my package and i got the same problem though much less frequently. This time i solved it by repairing my wireless connection [windows option].

This does not work with the belkin and I have to restart the router.

Paul
 

A:Belkin Router 02 problems

Read other 16 answers
RELEVANCY SCORE 43.6

I have the 802.11g desktop card which I previously ran on XP. Just got Vista and downloaded new drivers etc ready to install it, but it won't come up on device manager after many attempts. Any ideas?

Thanks in advance.

Read other answers
RELEVANCY SCORE 43.6

Ill start from the beginning,
I have bt voyager 220v connected to my pc for internet and recently bought a belkin wireless g router to use wireless with a laptop. All was connected and working fine for couple weeks then all of a sudden just stopped, the internet works fine when connected direct to the pc again but will not recognise anything going through the wireless router.

I contacted a pc guy i know who advised the following: The new modem probably needs you to enter the account name/password to connect.

and I understand that the BT voyager 220V modem/router user name/password is entered on the WAN configuration screen using the web based setup for the modem but im not sure how to access this information?

Please could you help??
 

A:belkin wireless problems

First off, please post the exact model of the router.

Second, let's see this when connected directly to the modem.
Hold the Windows key and press R, then type CMD to open a command prompt:

In the command prompt window that opens, type type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

Read other 1 answers
RELEVANCY SCORE 43.6

We use a Belkin Router with a Verizon Internet connection. This router publishes a wireless network with a router IP of 192.168.2.1, and all devices connected are tagged with IP addresses 192.168.2.x. Everything was working fine until recently when the main computer and router were moved. Something went wrong and now I cannot get my laptop to connect unless I disable the security features. It has WPA, WEP, and WPA2 options. When ever I use any of them the laptop allows me to configure the connection but for some reason won't save the options I use. The router says to use WPA with a TKIP or AES encyption. The laptop will not save the TKIP option and continues to return to AES. I believe this is the problem. Even when I get the settings to be accepted occasionally the computer tells me there was a "Problem applying the Profile" set up for this connection. I am at a complete loss of what to do other then leaving the security open. Please help!!!!!!!!!!!!!
 

A:Problems with Belkin Router

Read other 7 answers
RELEVANCY SCORE 43.6

Ive owned my laptop for about 6 months now and after much pestering my mum (im 16) finally said i could have the internet on it. So my brother brought a 'Belkin wireless router' He installed it and set it up but theres a problem.

The big one is i cannot get the internet on my laptop. After looking at WLAN utility it says that it isnt connected. I dont know what to do. Ive rebooted the router as belkin said to do on the website. Ive noticed that it a window comes up and says it cannot find the tcp/ip

Im completely stuck and really upset because ive been looking forward t the internet on my lapyop for a long time. thanks for your help.
 

A:Belkin network problems

Hi and welcome.

Well first of all have you switched the Wireless adapter on your laptop on?
there's usually a little sliding switch at the front, back, side, or underneath your laptop. check the manual and the manual wil show you where?
 

Read other 11 answers
RELEVANCY SCORE 43.2

Okay I assigned the access point a static IP 192.168.2.50 within the router IP range. My computer wireless card is detecting the access point but I can't get the belkin n600db to detect the access point.
 

A:I can't get my belkin n600db to detect my belkin f5d9231(access point mode).

Read other 14 answers
RELEVANCY SCORE 43.2

Hi Guys i am trying to setup my Broadband connection. i read the whole 510v6 manual but was not able to find how can i set the 510 v6 modem into bridge mode. Please help me.
 

A:Solved: connect Speedtouch 510V6 with Belkin belkin f5d8231

Read other 7 answers
RELEVANCY SCORE 43.2

I made the mistake of posting this in a solved forum, so I am making a new thread now. The solution was returning the router and getting a different one which is not an option for me.

But here is a link to the original post:
http://forums.techguy.org/networking/623333-solved-belkin-router-dmz-problems.html

Basically, my XBox 360 has a static IP and when I enable DMZ with it's IP the rest of the computers on my Network stop working. I can ping but when I try to browse everything times out. As soon as I turn DMZ off everything works again except my XBox 360.

~RediXe
 

A:Solved: Belkin router DMZ problems...

Read other 7 answers
RELEVANCY SCORE 43.2

I recently restored my laptop (Compaq Presario V2000) back to Windows XP, it was running on vista before. I am currently using a Belkin N+ Wireless Router. My computer is connected to the network and the computer says that the signal is strong. However, when I go on internet explorer, the belkin utilities router set-up page appears and I cannot surf the net. Help! I just want my internet back!
 

A:belkin wireless internet problems

sounds like your home page is set as the default. Can you try to go to a different web page like www.abc.com and see if you can see that.
 

Read other 1 answers
RELEVANCY SCORE 43.2

hi iam trying to get my belkin router to work at my mums as i want to use it for my laptop while she uses her pc i had it working when i lived here but now it dont seem to want too work as it once did i have don the ping thing and i can get on msn and send and receive emails from mums pc everything is fine on my laptop i get an error message from tesco error 797 i can not get internet explorer to work at all and im now banging my head mums not too pleased neither am i please help someone
 

A:belkin router causing problems

Read other 11 answers
RELEVANCY SCORE 43.2

I have a Belkin n+ f5d8235-4 v2 and I have reset the router and then I had to manually reconfigure everything and I may have messed something up. The router has two blinking amber lights: the modem and internet lights.
-I began with my modem booted up, then I booted up my router while my modem and router were connected via yellow ethernet cable and another cable from my router to computer.
-First, I set up a new password
-Next, I went to Connection Type and set up - Dynamic, then entered my ISP host name and clicked apply.
-Next, I went to MAC address cloning, and just clicked apply as the boxes were already filled with characters.
-Next, I went to Channel and SSID and left everything the same except I changed my SSID name and took off the box marked broadcast SSID then clicked apply . The wireless channel was set to auto and current channel was 11 and extension channel was set to auto.
Next, I went to Security, Security Type: WPA-PSK, Authentication: WPA-PSK + WPA2-PSK and entered a new PSK and clicked obscure PSK then apply
Next, I went to Guest Access and enabled radio, created ssid name, Security: WPA/WPA2 PSK, Authentication: WPA-PSK + WPA2-PSK then entered the same PSK as before and clicked obscure PSK then apply.
For some reason, when I go back to both of the previous two screens, the new password I created does not show up, only my old one but when I type the new password into my wifi network, it connects.
This is as far as I have been and I'm not really sure w... Read more

Read other answers
RELEVANCY SCORE 43.2

I have a belkin wireless G USB Network Adapter which looks like this:

http://keelstech.com/zencart/images/BelkinWirelessGUSBNetworkAdapter.jpg

And a Belkin Pre-N Wireless Router which looks like this:

http://www.mrgadget.com.au/blogimages/belkin_pre-n_wireless_router.jpg

(I post pictures to help others get a better image of what I'm working with)

Anyways, I recently had to reformat everything and start over. Everything seems to be working rather smoothly but the USB Network adapter. My connection speed is literally 10-20 mbps. When it normally runs a nice 60-80 mbps. And before the reformat it worked completely fine.

So here's what I have tried and done in order to resolve this issue. And by the way there are 3 other pc's on the network and all work just fine and are up to speed connection wise and also use wireless belkin network cards, except for the one downstairs which is an older usb linksys (which is now Belkin) adapter. Anywho...

I have tried moving the adapter around in case there is interference.
I've updated all the drivers to the latest version.
I have tried different USB ports and installed the software each time.
I have updated windows xp home with all the updates.
I've tried resetting the router and adjusting it's position.
I've configured the wireless connection for encryption, manual IP and server. I've also tried auto detect.
I've scanned for viruses, spyware, malware, dialers, keyloggers. I cleared with fl... Read more

A:Belkin Wireless Networking problems

Read other 9 answers
RELEVANCY SCORE 43.2

Hi, hope you can help a new guy here! I am running win xp home with sky broadband. until my little lad broke it i had a usb dongle which worked fine. to free up my only two usb ports i saw a belkin f5d7011 wifi card so bought that.

I have installed it but it won't pick up any wireless networks. Can anyone please help? thanks
 

A:BELKIN Wifi card problems

Read other 9 answers
RELEVANCY SCORE 43.2

Before I begin, here are my specs using the TSG SysInfo:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 8
RAM: 32621 Mb
Graphics Card: Intel(R) HD Graphics 4600, -1984 Mb
Hard Drives: C: Total - 912078 MB, Free - 684616 MB;
Motherboard: Acer, Veriton M4630G
Antivirus: None (Not Yet)
I'm having this problem that my games are always laggy (as in networking wise.) I just got a new computer and I realized that the computer does not come with a built in wireless card for networking, so I continued to buy a Belkin N750 DB/N900 DB Dual-Band Wifi USB adapter. When I followed the installation instructions for the driver software for the device, I restarted my computer to finalize the installation. After that, I checked my down speed via Network and Sharing Center in control panel, and i'm getting about 130 mbps. For example, I downloaded a game called Counter Strike: Global Offensive to bench mark my computer. I'm getting a good frame rate, but every game I join, I have over 500 ping, and making the game unplayable. This really bothers me, because in the same room, another computer capable or running CSGO at about the same frame rate has on average less than 10 ping. The only difference is that it's using a built in card and is about 1 foot from the router (my computer is less than 7 fee... Read more

Read other answers
RELEVANCY SCORE 43.2

I have the PCI Belkin F5D7000 v7000 Wireless Card.

It has the Realtek RTL8185L chipset.

This card has given me nothing but problems. The computer is running a fresh Windows XP install at the moment. I installed the drivers as Belkin instructs (install software, turn off computer, plug in the card, restart), and the wireless card is detected by Windows.

I can see our Home wireless connection, but the computer refuses to connect to it.

The Belkin utility says "This connection has Limited or No Connectivitiy" when I use it.
Windows XP's wireless utility refuses to connect to the network. It can see it, but if I try to connect, it states, "Windows is unable to connect to the network" etc

My laptop, in the same room, is connected to the network via wireless and is flawless. I don't get one drop out.

On rare occasions, on reboot, the wireless SOMETIMES connects, and I can get on the internet. This doesn't last long, with the Internet dropping out, massive lag spikes and I cannot reconnect, I get sent back to the error message stated above.

I reinstalled Windows XP just in case of something fishy, and that hasn't helped.

I also have used drivers for the Realtek chipset (doesn't even let me use wireless, so useless), the Belkin drivers on the CD, and the latest Belkin drivers for the V7 card, off Belkin's website. Both Belkin drivers give me the same problem which I've mentioned above.
 

A:Solved: Belkin F5D7000 V7 Problems

Read other 16 answers
RELEVANCY SCORE 43.2

I have connected to my uncle's "unsecure" wireless (Belkin) with no problem. He is very aware of this. He has no idea why this is happening. He comes up, Im on the 2nd floor and brings his laptop. He is connected at the same time, like it was before. What could be preventing me from logging in? Please help
I have Vista he has Win XP in a Vaio.
 

A:Having problems connecting to Belkin wireless, please help

Read other 11 answers
RELEVANCY SCORE 43.2

Hey sevenforums im new here =].

Anyways i just got my windows 7 ultimate working and everything is working fine expect my network adapter. I installed the vista drivers found on the belkin website. Which did the trick and made it work. But i noticed every 2 hours or so the adapter would disconnect from my internet while everyone else in the house who are on xp/vista works percfectly.

Now im not sure if this is because my network adapter isn't compatilbe with windows 7 or something else.

Oh and im using Belkin Wire G+ Mimo ver 3001

Can anyone help me out, and also is anyone else getting this problem

If there is nothing i can do what network adapter would you guys recommend which works with windows 7 and i can get in the uk :P?

A:Belkin G+ Network adapter problems

  
Quote: Originally Posted by Badmax


Hey sevenforums im new here =].

Anyways i just got my windows 7 ultimate working and everything is working fine expect my network adapter. I installed the vista drivers found on the belkin website. Which did the trick and made it work. But i noticed every 2 hours or so the adapter would disconnect from my internet while everyone else in the house who are on xp/vista works percfectly.

Now im not sure if this is because my network adapter isn't compatilbe with windows 7 or something else.

Oh and im using Belkin Wire G+ Mimo ver 3001

Can anyone help me out, and also is anyone else getting this problem

If there is nothing i can do what network adapter would you guys recommend which works with windows 7 and i can get in the uk :P?


What version of win 7 are you running? (7000,7100,7600)

Read other 4 answers