Over 1 million tech questions and answers.

lenovo y580 could not find recovery environment

Q: lenovo y580 could not find recovery environment

I saw a lot about could not find recovery environment and win 8.1 but I think i have another problem.My charger is not working properly sometimes it chargers sometimes not ( and i have to unplug and plug back the cable into the acumulator) and because of this, when I tried to open my laptop it's shuting down after 1 sec. This brutal shuting down happened for 5 times I guess and since then every time I boot it says "scanning and repairing drive (\\?\volume(f030c5da-d83f-45ed-". So when I realized that something bad happened I tried to return my win 8.1 to factory but when i got to settings/ change pc settings/ update and recovery / recovery / REmove everyting and reinstall Windows it got this beautifull message "could not find recovery environment " What can i do to get things to normal ( to make windows recovery working again). I m not interested in my data I can erase everything PS: Please don't say it's because I change something at partitions ( I lost onekey recovery when I change something at partition but reinstaling windows to factory was still working until this charger problems)??

Read other answers
RELEVANCY SCORE 200
Preferred Solution: lenovo y580 could not find recovery environment

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 75.6

Hi All,

I have searched extensively for this issue but haven't found any workable solutions so I'm posting.

Recently purchased a Lenovo Ideapad Y580 and performed a fresh install of Win 7 Premium 64-bit on a new SSD. Installed latest drivers for all hardware but discovered after the install that my wireless adapter wasn't able to find any wireless networks (it worked find under Windows 8 when laptop was first unboxed). My wired connection works fine though, I am able to connect up to my network without issue using a network cable. Also, I am able to connect to my home wireless network without issue using another laptop.

In addition, the adapter icon in my tray shows a red-X on it. I've found many issues through web searches that suggest driver updates or hardware disable/enable steps but neither of these approaches have worked for me. I am holding off re-installing my OS until I've tried some more simpler and less time consuming options.

My system:

OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 8
RAM: 8060 Mb
Graphics Card: NVIDIA GeForce GTX 660M, 2047 Mb
Hard Drives: C: Total - 244095 MB, Free - 186380 MB; D: Total - 457852 MB, Free - 457748 MB;
Motherboard: LENOVO, INVALID
Antivirus: None

- Qualcomm Atheros AR8161/8165 Ethernet Controller
- Intel Centrino Wireless-N 2200

All drivers are up to date.

When I run a... Read more

A:Solved: Lenovo Y580 cannot find any wireless networks / red-x on adapter icon in tray

Solved this myself after further searching - Zonealarm was the issue. Uninstalled and wireless came back to life.
 

Read other 1 answers
RELEVANCY SCORE 73.2

Hello dear friends,

I am using Acer v3-571G, been 3 years now and I had decided to restore my laptop to factory settings as my laptop is getting kinda slow and stuff, but I'm facing problems. I did upgrade from Windows 8 to 8.1.

1. I cannot use recover options in Windows 8.1 because it says "Could not find recovery environment".

2. I cannot use acer recovery management because it says "Could not find recovery environment".

Please help! >.<
here are some photos:

Read other answers
RELEVANCY SCORE 73.2

Hello dear friends,

I believe that I have some serious problems in my laptop. I will list some of them, and I hope that maybe someone can help me out because I'm getting crazy with these issues!

1. I cannot use recover options in Windows 8.1 because it says "Could not find recovery environment".

2. When I go to Advanced Start up, under Recovery menu, it does not show Troubleshoot option.

3. When I try to Create a Recovery drive, it says "We can't create a recovery drive on this PC".

4. When I try to enable/disable "reagentc" in CMD, it says "Operation Failed:3".

5. I cannot access in Bios, since I bought the laptop, and therefore I cannot re install a fresh copy of windows with my flash drive.

Basically, I'm stuck.

Hope someone can help me!

A:Windows 8.1 Recovery - Could not find recovery environment

Welcome to EightForums

Have you made the OEM manufacturer's Recovery Disks?



   Information

We always assume you have made your Recovery Disks using the OEM manufacturer's Recovery Media Creator app the first day you had your new PC.
& made the Startup Repair CD. (Windows 8 only)
Recovery Drive - Create with USB Flash Drive in Windows 8
System Repair Disc - Create in Windows 8 (Windows 8 only)





I would recommend you making the OEM manufacturer's Recovery DVD's or USB drive.
or
You can order the Microsoft official OEM Recovery disks from the OEM manufacturer's website.

Did you upgrade from Windows 8 to Windows 8.1?

Read other answers
RELEVANCY SCORE 72.8

Last week, I purchased an Acer Aspire v5-473g Windows 8.1 pre-installed laptop. The first thing I did is to partitioning the hard drive with EaseUS Partition Master. After that, I want to create a USB recovery drive but I found out that I was unable to do so.

When I launch the recovery drive program build in in Windows, I found out that the "Copy the recovery partition from the PC to the recovery drive" option has been grey out. If I continue the program, it would shows "We can't create a recovery drive on this PC. Some required files are missing".
In addition, I also found out that I was unable to reset nor refresh Windows 8.1.
One thing I am sure is that I did not mess up with the all those system reserved OEM partitions( including the one push reset partition) when I partition the drive. Those partitions should be present and intact.
After doing some research on the internet, some say that I need to mount the system recovery image (the "Push Button Reset\ RecoveryImage\ install.wim") using the "reagentc.exe". But I notice that I was not able to use reagentc.exe.
When I input reagentc.exe /info, reagentc.exe /disable, or reagentc.exe /enable, or all other commands using "reagentc.exe", it gives error: operation failed 3.
So how can I now create a USB recovery drive, or how can i perform reset now?

Please help.

A:Could not find recovery environment

If you like, base on your screen shot, you could try to open the Admin command

diskpartselect disk 0select partition 1assign letter=Rexitreagentc.exe /setreimage /path R:\Recovery\WindowsRE /target C:\windowsTry create a recovery disk to see if it works

Good luck !!!

Read other 30 answers
RELEVANCY SCORE 72.8

So I'm having the exact same issue as this guy here:
Could not find recovery environment
but I just wanted to make a new thread because the other one is marked as resolved. (Mods feel free to merge the two).







Originally Posted by Tomhc


Last week, I purchased an Acer Aspire Windows 8.1 pre-installed laptop. The first thing I did is to partitioning the hard drive with EaseUS Partition Master. After that, I want to create a USB recovery drive but I found out that I was unable to do so.

When I launch the recovery drive program build in in Windows, I found out that the "Copy the recovery partition from the PC to the recovery drive" option has been grey out. If I continue the program, it would shows "We can't create a recovery drive on this PC. Some required files are missing".









Originally Posted by topgundcp


If you like, base on your screen shot, you could try to open the Admin command

diskpartselect disk 0select partition 1assign letter=Rexitreagentc.exe /setreimage /path R:\Recovery\WindowsRE /target C:\windowsTry create a recovery disk to see if it works

Good luck !!!



I get to step "3. select partition 1" fine but at step "4. assign letter=R", I get: "There is is no volume selected". Which volume do I need to select?

So i just checked which volume C: is and selected it but got this message:



... Read more

A:Could not find recovery environment

If you used EaseUS to partiton your system, you may have caused problems for yourself. That utility seems to mess up Recovery partitions by turning them into OEM partitions.

Open diskpart, select the drive and do a list partition command and attach the results. If the type shows as OEM, you may have the problem. But note, there are some systems which set up possibly one OEM partition as a result of their process.

There are also quite a few threads dealing with resolving problems caused by EaseUS.

Read other 9 answers
RELEVANCY SCORE 72.8

I was trying to reset my computer from Settings->Update&Security->Recovery->Reset this pcand got a pop-up saying "could not find recovery environment" how can i fix this issue I had also tryed to reset using troubleshooting options and there I couldn't find reset option  some of images for better understanding are below  

Read other answers
RELEVANCY SCORE 72.8

Hello after reading the whole topic about this i still need some help.
I used easeUS Partition Master, and that broke the link to the recovery. I fixed it but somehow it snapped again.

On the screenshot you see that Windows RE location is empty, somehow i can't seem to fix this.

As i can see the recovery image location is right.
For both i checked the offset twice, i changed their ID's (because it said OEM etc)

Thanks in advance.
ps. Just found out that i posted this in the wrong part, can someone change this?

A:Could not find recovery environment

- Post a screenshot of "list partition" and "reagentc /info".
- Open a command prompt as administrator and type (or copy and paste) the following commands.

diskpart
select disk 0
list partition
exit
reagentc /info

- Alt-PrtScr copies the active window to the clipboard.

Read other 26 answers
RELEVANCY SCORE 72.8

i want to reset my computer

and i got this problem

my computer is

win 8.1

toshiba

Read other answers
RELEVANCY SCORE 72

Hello, I have been trying to do a factory reinstall from the system restore menu. Every time I try it I get this incredibly annoying "could not find the recovery environment" message. I have reinstalled the OS dozens of time with no problem. For whatever reason now it refuses to cooperate. I'm getting desperate. Thank you.  P.S. This is on an HP stream so I have no disk drive.

Read other answers
RELEVANCY SCORE 72

Hello every one!!!

I am new here and am desperately seeking help from experts on an issue which I am facing...

Due to some reason I wanted to reset my laptop to factory settings and have initiated the process by creating the recovery media through a usb drive and have created a copy of recovery on it successfully...

(It has given the message of recovery was finished successfully,label it and store in a safe place)

Then I tried to reset my laptop by pressing the "Reset" option (with the usb connected) but surprisingly it is throwing an error.

"Could not find the recovery media"
"Please insert widows installation or recovery media and restart"

(Note: I don't have any thing in the USB apart from recovery image)

Please people I need your expert advice on this as it is very much in emergency to reset my laptop.

Any help is much appreciated

Regards,

Manoj

A:Error: Could not find recovery environment!!! Help please!

Try booting from the USB drive without pressing the recovery key on the laptop. let it run the recovery from the thumb drive not the hard drive.

Read other 3 answers
RELEVANCY SCORE 72

I looked through this post Windows 8.1 Recovery - Could not find recovery environment and while I tried some things there to get my recovery environment to work, I am still having issues. I have included an image of what my partitions look like. I don't have physical recovery media but believe if I can get the Recovery Environment to work I can move on with reset.

A:Windows 8.1 still can't find Recovery Environment

When I tried to use reagentc.exe as in the one example reagentc.exe /setreimage /path R:\Recovery\WindowsRE /target C:\windows, it said WindowsRE not there. I went into C:\Recovery\ and the only things in there are a log folder and reagentold.xml

Read other 2 answers
RELEVANCY SCORE 72

Hello and I hope everyone had a nice new year.

First off, my computer has been getting a face (AKA: BSOD) for 3 days. I called HP and told them about the situation and sent a flash drive but its not here.
Then, when I try to restore my computer, It doesn't like the way I set it up (See attachments). I don't know what to do next but to return it back to Walmart. Anyway, I got this for Christmas.

Oh and by the way, heres my information since this is brand new!
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1 with Bing, 64 bit
Processor: Intel(R) Celeron(R) CPU N2830 @ 2.16GHz, Intel64 Family 6 Model 55 Stepping 8
Processor Count: 2
RAM: 3986 Mb
Graphics Card: Intel(R) HD Graphics, -2038 Mb
Hard Drives: B: Total - 648 MB, Free - 387 MB; C: Total - 455728 MB, Free - 408416 MB; D: Total - 256 MB, Free - 152 MB; N: Total - 492 MB, Free - 124 MB; W: Total - 20168 MB, Free - 20059 MB;
Motherboard: Hewlett-Packard, 233F
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
 

A:Solved: Could Not Find Recovery Environment

Read other 15 answers
RELEVANCY SCORE 72

I'm running Windows 10 Home on a Dell Venue 8 Pro. It originally ran Windows 8.1, when I bought it, but I made the free upgrade. It's mostly worked fine, with a few Windows 10-related quirks here and there. However, more recently, I've decided to give it away to a close friend of mine, as I've got a new tablet, and I want to factory reset it...So that they can have a fresh tablet, you know? Anyways, it's not worked, no matter what I've tried, and I've looked on the internet, but no one has my specific problem. I can't use external hardware on it. No recovery flash drive, no recovery CD, nothing. I can only use the tablet itself, a pair of headphones, or the tablet's charger. Also, for the record, I can't plug the charger up to my computer, because the tablet considers itself a computer. The charger won't even work if I plug it's USB portion into my PC. It just doesn't charge, then. You see, the charger is phone charger-esque on one end, and the other end is a USB that plugs into a wall-adapter (the cord and the adapter came with the tablet). Also, I've no money for purchasing new versions of windows or special recovery options. So, does this mean the tablet is useless, and I can only give it away as is? Any help is greatly appreciated.

Read other answers
RELEVANCY SCORE 72

So I'm having the exact same issue as this guy here: http://www.eightforums.com/general-support/53334-could-not-find-recovery-environment.html

Summary:
Tomhc said:


Last week, I purchased an Acer Aspire Windows 8.1 pre-installed laptop. The first thing I did is to partitioning the hard drive with EaseUS Partition Master. After that, I want to create a USB recovery drive but I found out that I was unable to do so.

When I launch the recovery drive program build in in Windows, I found out that the "Copy the recovery partition from the PC to the recovery drive" option has been grey out. If I continue the program, it would shows "We can't create a recovery drive on this PC. Some required files are missing".Click to expand...

This worked fine for him:
1. diskpart
2. select disk 0
3. select partition 1
4. assign letter=R
5. exit
6. reagentc.exe /setreimage /path R:\Recovery\WindowsRE /target C:\windows
Click to expand...

I get to step "3. select partition 1" fine but at step "4. assign letter=R", I get: "There is is no volume selected". Which volume do I need to select?

So i just checked which volume C: is and selected it but got this message:
Virtual Disk Service error:
Assigning or removing drive letters on the current boot or pagefile volume is not allowed.Click to expand...

Which makes sense....

Disks: HDD and my SD card.
Partitions: Partition 1 is the Recovery partition
Volumes: Dvd drive, C:, ESP... Read more

A:Solved: Could not find recovery environment

Read other 9 answers
RELEVANCY SCORE 71.2

I cant get a recovery disk because my warranty expired 4 months ago, and there is no product key on the side of my computer so I used a product key finder and the key it gives me doesnt work. Could someone please help me?
 

A:Need help restoring "Cannot find recovery environment" 8.1 error

May I ask what brand and model your computer is? There might be some instructions on using the recovery partition that I could find for you. Unless, you built the computer yourself, then you'd need your installation disc and key, unless its changed since I last installed windows 8 on my computer.
 
 
And.... I just found maybe what you're looking for: http://www.eightforums.com/general-support/53334-could-not-find-recovery-environment.html

Read other 3 answers
RELEVANCY SCORE 71.2

Good Morning,

This is my first ever post on this Forum after trying to follow a solved solution which I couldn't complete.

As the title mentions I am unable to restore my HP Elitepad - I seem to get " Could not find recovery environment". I have followed a previous thread but I just cant to seem to resolve this issue.

The steps I followed were (this was kindly provided by Topguncp);
diskpartselect disk 0select partition 1assign letter=Rexitreagentc.exe /setreimage /path R:\Recovery\WindowsRE /target C:\windowsTry create a recovery disk to see if it works

I have followed this and item 6 is where I think things go wrong? Where should I write/insert item 6? is this carried out in diskpart? I tried this and a screen shows some detailed information. I then reboot, and try a recovery and it comes up with the same error.

Any ideas or advice for a computer novice would be greatly appreciated. I haven't provided any screen shots as I am unsure what information is relevant although happy to provide.

Thank you for looking

Regards,

GC1

Read other answers
RELEVANCY SCORE 71.2

Hi, i've tried to Factory Reset my Computer, but it gives me a error saying "Can't find recovery environment" this has been going on since November 2016, how can I get my recovery files back? I need to fix my PC or may just die off from Slow Performance, and possible hidden viruses that MalwareByte can't scan, and I don't have $15.00 for your support, so please, I want the Tech support to respond to me, i'm only 14. (I'm not doing phone calls)

A:Windows 8.1 | Can't find recovery environment Error

@Homely Hello;Allow me to welcome you to the HP forums! The only "free" way to recover your PC is using the HP Recovery Manager, which is generall invoked by rebooting the PC and pressing F11 repeatedly until the Manager comes on screen. Unfortunately, if the Recovery partition become corrupted or is tampered with in any way, the HP Recovery Manager will often refuse to work. The ONLY way to do a Recovery in this situation is using HP Recovery Media, and you have to order that from HP, and it is not free -- generally it costs around $50 USD. Regarding an infection, I have used MalwareBytes (MBAM) for a long time and have found it to be one of the best AV products around.  So if the current MBAM version (v3.0.6.1469) does not find any malware, I doubt you really have any. Also, if you're running an old version of MBAM, you should download the current version from their website and run it:  https://www.malwarebytes.com/ As to performance problems, maybe something in this might help:  http://h30434.www3.hp.com/t5/Desktop-Software-and-How-To-Questions/My-Computer-is-running-slow/td-p/...Good Luck

Read other 1 answers
RELEVANCY SCORE 63.2

Hello!
I'm trying to reset my PC in hopes that it will fix some issues i'm having with games, however whenever I try to reset my PC it says "Could not find the recovery environment". It says to insert my windows installation or recovery media, but I got windows 10 from the free upgrade (I upgraded from windows 7) so I don't have anything to install it. I could really use any help that anyone could offer. Thanks!

A:"Could not find the recovery environment" on attempt to reset PC

Welcome to the forum you can go an download a iso for usb or dvd Windows 10 ISO Download

Read other 2 answers
RELEVANCY SCORE 61.6

I'm trying to do a factory reset, but I am unable to because I am apparently missing a recovery environment.

I think it may have occurred when I deleted one of my recovery partitions to make room for a new partition that I installed Linux onto.

I was unable to create a recovery drive. "Cannot create a recovery drive on this PC".

I still have a recovery partition:

A:"Could not find recovery environment"

Contact the computer manufacturer to possibly obtain Recovery Disks.

Read other 2 answers
RELEVANCY SCORE 61.6

I'm trying to restore my laptop (Acer Aspire e5 551), but every time I try to, it says "Could not find recovery environment."
I also tried to just refresh my laptop, but that some thing prompts me.
I looked on here prior to posting this thread, and tried something from a forum, but I was utterly confused because I didn't understand.
What do I do?

Read other answers
RELEVANCY SCORE 60

I'm just curious if this kind if setup causes any issues. Did anyone try that?

A:Lenovo Y580 Windows 10 SSD + HDD. Did anybody try ...

I currently have m-sata ssd and sata hdd installed. I upgraded from 8.1 to 10 via window's means, then from RTM to insiders build. Everything works fine.

Read other 1 answers
RELEVANCY SCORE 60

Hi,

I own a Y580-M772CMH 15.6FHD/i7-3610QM/8G/ laptop with Windows 7 and a few weeks ago I used Ccleaner to clean the registry. Like the dumb stupid person I am I did not pay attention to what it was "cleaning".

Next time I booted up my Laptop it failed to start Windows and gave the following message:

Check cable connection!
PXE-M0F: Exiting Intel PXE ROM.
No bootable device -- insert boot disk and press any key

So next time I pressed F2 while booting to see:

Boot Device Priority
Internal HDD: SAMSUNG MZMPC064HBDR-000L1
SATA HDD: ST1000LM024 HN-M101MBB
SATA ODD: Optiarc BD ROM BC-5550H
Network Boot: Atheros Boot Agent

To me it looked like I still had both disks working so I put in a Windows ISO before boot to see if I could repair. The System Recovery Options screen showed me no known existing OS on the device.

So I powered down and used One Key Recovery which told me when I clicked to restore to factory conditions that the partition layout has changed.

Finally I used a bootable Partition Wizard and that showed me this:

Note the negative used value at disk 1.
To my layman's eyes it seems like the SSD and HDD, that are normally combined by a Lenovo software Raid are now separate. And something I deleted with Ccleaner by accident caused it (probably).

Main thing is, I actually don't know what the problem is and so don't know how to proceed.

I'm afraid my data is lost to me, which isn't a terrible loss, but am I correct in assuming... Read more

Read other answers
RELEVANCY SCORE 60

Hello, As stated in the title, I have a Lenovo IdeaPad y580. I purchased it approximately three-and-a-half years ago, and only now is it really beginning to chug durings its processes. Point is, I want it to last perhaps another half year or so while I finish saving up for another computer. As a gamer, I'm fine with the limitations of the GPU, but sometimes my laptop legitimately has issues processing stuff, such as loading Google Chrome properly. I know enough about Windows to clean out viral matter and uninstall programs that I don't use that are running in the back. But does anyone have any tips or tricks to make this hunk of junk last maybe six more months before it becomes unusable?TL;DR I need to make my laptop run at least a reasonably sub-average to average level for six more months. Any tips are appreciated.

Read other answers
RELEVANCY SCORE 59.2

Hi,

I need some help with bsods on Windows 8.1 OS. I'm not sure but probably there is my fault that this happens. I have Lenovo Y580 and a few months ago I updated my bios to version 5DCN40WW(v2.07), i downloaded it from Lenovo support website (in this time i got windows 7), then i decide to run Windows 8, but this bios was purposed for Windows 7 and now i cant find 'actualization' to my old bios wich was purposeed to Windows 8, I'm looking for version 5DCN89WW of bios to this Lenovo. Now I have 2-3 bsods a day, even after format, I've updated my drivers using SlimDrivers and downloaded actual drivers from Intel website,on the Intel website I had an information that product has been detected as Kontroler Qualcomm Atheros AR8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30) but this device is unknown or unsupported (current driver:2.1.0.16) and same thing with Audio Driver for Intel Desktop Board, product detected: Sound Bluetooth (current driver: 12.0.0.2951).

I did memtest86:
https://dl.dropboxusercontent.com/u/...07-032101.html

And this is scr from Crystal Disk Info:
https://dl.dropboxusercontent.com/u/7166435/disk.jpg

And at the end there are .dmp files:
https://dl.dropboxusercontent.com/u/...11-12-2013.zip

If anyone could help me I'll be very grateful and maybe there is any chance that someone who has Lenovo Y580 can copy for me newest bios and post here? Laptop was in service but they didn't fix this issue and they didn't restore my old ... Read more

A:random BSODs lenovo y580 win 8.1

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!

AFAIK, you have the latest BIOS for your system.
Here's a link to it: BIOS Update for Microsoft Windows 7 (32-bit, 64-bit) - IdeaPad Y480, Y580

Out of 17 memory dumps there were 7 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- compatibility issues (3rd party hardware/drivers)
- low-level driver problems
- or even malware (scanned for when we ask for hardware diagnostics from Initial Hardware Diagnostics or Hardware Diagnostics ).

You can get a head start on the hardware diagnostics if you'd like - they are located here: Hardware Diagnostics

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Windows systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions).





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your sys... Read more

Read other 16 answers
RELEVANCY SCORE 59.2

Hello, I recently upgraded my home internet to a 5GHz dual band connection which I came to learn could not be utilized by my Lenovo Y580s wifi adapater : Intel Centrino 2200N. In order to utilize my new internet, I purchased a USB dual band a/c dongle at BestBuy for $30, the only drawback being a small piece constantly plugged in / using one of my USB ports (not a big deal). I was able to connect with this device at 5ghz and for the past few months everything was fine and I received blazing fast internet using this USB as my wifi. Recently I noticed I I've been losing connection speed and internet. My transfer rate jumps from 6MBs to 433 MBs as and everywhere in between while connected at 5ghz, and figured my usb dongle might be faulty. I unplugged the device to test it, and connected using the computer's normal wifi over the 2.4Ghz channel. To my surprise, while the signal was strong, my internet speeds were also jumping between 1mbs and 60mbs, essentially the same thing that was happening while using the 5ghz USB. In an effort to trouble shoot on my own, I did the following:- Did a full mallware / virus check ( was clean )- I live in a Condo so I installed INSIDDER software to check my wifi channels: no real problems there- Connected several other devices using both the 2.4 and 5ghz connection, including laptops and Iphones/Ipads. All were fine so I know it's not my router- Called the internet cable company to see if they might be thr... Read more

Read other answers
RELEVANCY SCORE 59.2

Hi everybody, I need to replace the battery of Lenovo, but it seems impossible to find it, these the informtion I have: 121500037 for  Battery pack, 6cell 6800mAh 72Wh, Panasonic, Pana L11P6R01 3S2P 72Wh121500039  Sony L11N6R01 10.5V72Wh 6cellBTY  I have posted a comment in another thread but no reply, I also can not find the right cells to replace them. Any help would be much appriciated. Cheers.


























Lenovo y580 battery.jpg ?2994 KB

Read other answers
RELEVANCY SCORE 59.2

I currently have a Lenovo Y580 Laptop computer with a dvd burner optical drive. I am wanting a blu ray burner where I can watch iblu-ray movies, and occasionally burn files to a Blu ray disk. I have found this drive, but I'm not sure whether it is compatible. It appears there are several different sizes for optical drives. Any idea whether this will physically fit in my laptop? Thanks for your assistance.

http://www.amazon.com/Panasonic-UJ240-Blu-ray-Burner-DVD±RW/dp/B003AXW2YQ
 

A:Blu Ray Burner for Lenovo Y580 Laptop

Unless it is designed for that machine, and it states that it will work, I doubt very much that you can use it. Laptops, in particular, are very proprietary in hardware, and though some few standard pieces may be interchangeable, for the most part, even the connections for optical drives are often the company's own. You'll need to get a drive from the manufacturer or one that they say will work. (Or advice from someone who has actually gotten one to fit.)

Alternatively, you could look into an external case with a USB connection for a BluRay drive. Since most people rarely use them, except for data storage (double-sided ones can hold 50 GB's which makes a great storage medium) or videos, and they are expensive, it may be best to buy just one that can be used on all machines and keep for future ones. I have found no problems with speed playing BluRay over a USB 2.0 connection (In the worst case, the contents could be copied to your hard drive before playing, anyway, though I have never had to do that). And, of course, since a drive that supports all optical media for both reading and burning is only slightly more expensive than those that support fewer types, it is worth the money to get a good drive. Just another idea...............
 

Read other 1 answers
RELEVANCY SCORE 59.2

Ok so here is the deal, I own a Y580-M772CMH 15.6FHD/i7-3610QM/8G/ laptop with Windows 7 and a few weeks ago I used Ccleaner to clean the registry and like the dumb stupid person I am did not pay attention to what it was "cleaning".Next time I booted up my Laptop it failed to start Windows and gave the following message: Check cable connection!PXE-M0F: Exiting Intel PXE ROM.No bootable device -- insert boot disk and press any key So next time I pressed F2 while booting to see: Boot Device PriorityInternal HDD: SAMSUNG MZMPC064HBDR-000L1SATA HDD: ST1000LM024 HN-M101MBBSATA ODD: Optiarc BD ROM BC-5550HNetwork Boot: Atheros Boot Agent To me it looked like I still had both disks working so I put in a Windows ISO before boot to see if I could repair. The following System Recovery Options screen showed me no OS existing. So I powered down and used One Key Recovery which told me when I said to restore to factory conditions that the partition layout has changed. Finally I used a bootable Partition Wizard and that showed me this: ? To my layman's eyes it seems like the SSD and HDD that are normally combined by a Lenovo software Raid are now separate? Something I deleted with Ccleaner by accident that caused it (probably)? Main thing is, I actually don't know what the problem is and so don't know how to proceed.Can I even save my data (I'm afraid not)? I've been linked this, which would solve it but I was hoping a compl... Read more

Read other answers
RELEVANCY SCORE 59.2

I'm 11 and using Ubuntu 17.04 Linux on my Lenovo Y580. The problem I'm having seems to effect every operating system I've used on it. The touchpad flips out randomly and sometimes stops working at all. Sometimes it will start to work but only for so long. It's will massively teleport up and down until I start hitting it a little bit, but this is bothering me and hitting it probably makes it worse. Any help would be appreciated. feel free to ask more advanced questions just because I'm 11. I will understand for sure.

Read other answers
RELEVANCY SCORE 59.2

Hi! At the start I'll mention that I am an "IT guy" (actually IT student)  so I have some higher than basic knowledge about the stuff going on with my computers but now even I am lost... I will start from the very beggining of my troubles - that might be a long story!
 
So, one day (quite a bit ago) I was playing League of Legends with friends like I did for over a year after purchasing my Y580 and the in-game "bug splat" error occured. It is not something unusual, it happens to people a lot in this particular game so I was like "meh, again they f*** up something with the patch". Then the system notification told me that "driver stopped working but has recovered" or something like that, which was a first time for me. I googled the problem but before I could read anything the screen froze and I had a first BSOD since installing Windows 8 (and I have it for a year straight now). It was IRQL_NOT_LESS_OR_EQUAL pointing at nvlddmkm.sys, part of Nvidia drivers.
 
 
I started doing obvious things - ran Windows in safe mode, everything was working fine. Then I removed Nvidia drivers completely, including registry entries and stuff. System loded in normal mode and was working - previously the blue screen was appearing before my Windows 8 login page even loaded. I managed to play games on Intel HD GPU and do my usuall stuff without any problems - as expected to be honest.
 
I did a memtest back then, also did it few days ago for 6+ hours wi... Read more

A:BSOD with both GPUs on Lenovo Y580

Hi David
 
Since you are familiar with computers, i will cut the crap and go directly to the troubleshooting. Please follow the below steps.
 
1. First uninstall both "Intel" and "Nvidia" drivers completely from the system. Laptops require tweaked drivers  specifically created for them rather than generic ones. If the Nividia adapter is disabled via BIOS, please enable it.
 
2. Then uninstall "Intel Rapid Storage Technology" driver and "Intel Wireless LAN driver" completely. Current versions are not compatible with "Win 8.1".
iaStor.sys Wed Nov 30 09:09:19 2011
Intel Storage drivers

NETwNs64.sys Fri Dec 2 12:20:55 2011
Intel(R) Wireless WiFi Link 5000 Series Adapter Driver for Windows 7

3. Now update the drivers in the order i posted.
 
IRST : https://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/23060/a08/SetupRST.exe&lang=eng&Dwnldid=23060&ProductID=2101&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%C2%AE+Rapid+Storage+Technology+(Intel%C2%AE+RST)
 
WLAN : https://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/23044/eng/Wireless_16.1.1_De64.exe&lang=eng&Dwnldid=23044&ProductID=3062&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+Wi-Fi+Products&ProductProduct=Intel%C2%AE+WiFi+Link+5300+and+Intel%C2%AE+WiFi+Link+5100+products
... Read more

Read other 13 answers
RELEVANCY SCORE 58.4

Laptop updated to Windows 10 then my friend downgraded back to Windows 7 and now the keyboard, mouse, and USB drives don't work and there's no backup image. HELP!!!

A:Lenovo y580 keyboard and track pad not working

Model # of laptop? Did you use the revert back to Windows 7 feature or clean install over Windows 10?
 
*edit* Sorry, saw you put the model # in the title.

Read other 2 answers
RELEVANCY SCORE 58.4

Alright, so early I tried to overclock my Nvidia GTX 660m Card, and it worked. the base clock speed is 835mhz, and the memory is 2500mhz. I OC'd the clock speed to 970mhz, and the memory to 3000mhz. It all worked fine, and boosted my gaming framerate quite a bit in PlanetSide 2 and Skyrim. ( I used NvidiaInspector to overclock, btw.) I went back to the overclocking interface, and accidentally set the memory rate to around +1300mhz. I then, without realizing, clicked on set OC settings, and it crashed my card. It rebooted, but now whenever I go into Nvidia Inspector to check my clock/mem speed, they're both set on 405mhz while idle or if there's a high load on my card. It's been stuck like this for a few hours, and I've tried several tweaks to fix it, including a reboot, rolling back the drivers, and then reinstalling the drivers, etc., with no resolve. I really need some help, as this is affecting my gaming horribly, and I'm getting terrible framerates. Please give suggestions/fixes as quickly as possible!

Thanks,
DDInc
 

Read other answers
RELEVANCY SCORE 58.4

Hello ! I tried to flash another Bios version wich killed my Bios-chips. I ordered to repair them besides an electronic company.They put new Chips in but flashed it with the wrong version of Bios: 3.70Before i started to flash the Bios it was 8.0 Version. After i got my Mainboard back today i re-assembled the Laptop and started it. I pressed "f2" to get into bios and to select boot option. I cant see any drives there, just UEFI Lan stuff. So i cant boot from Harddrives and the Laptop is useless atm.So it seems that this Windows 8 Version of the Laptop wont work with the 3.7 Version of the Bios, am i right ?Is it possible to flash the 8.0 Version without damaging the laptop again ? Please help me, i need the Laptop to work. Greetings and thank you in advanced Patrick

Read other answers
RELEVANCY SCORE 58.4

I've got a used Lenovo Y580 that crashes frequently when a fair portion of its memory is being used, such as installers, or running games. It crashes to a BSOD with an IRQL_NOT_LESS_OR_EQUAL code. I've looked in the drivers section and there aren't a lot of drivers available for the Y580. I downloaded the ones that apply to my laptop but I'm still having the problem. Any help would be greatly appreciated with this as I can't get much work done with it in this condition.

Read other answers
RELEVANCY SCORE 58.4

I've been using this laptop for around a year or so now, and it's worked perfectly up until this point in time.  The issue that I'm currently having is entirely mechanical. At the moment, my keyboard is intact and works just fine. However, if I press a key, (mainly the 'e' key) off-center, it pops the entire key up and I have to click it into place. It's not life-threatening or crucial to the machine's function, but when I am busy typing papers or lesson plans, having a key on the most constantly used vowel key continually pop up really puts a dampener in things. I've taken the key out and have tried to click it back in. While I can't see what's going on (given that there's a key in the way!), I can most certainly feel it clicking into place twice, both clicks stemming from the right side of the 'e' key. It seems that, to the best of my knowledge, only two out of four prongs that are meant to keep the key in place and in line are actually snapping and holding the key down. Whenever I type off-center and to the right, the entire left side of the key snaps up and must be pushed back into place. I'm wondering if there's anything I can or should do. Given that I've had my machine for over a year now, I'm unsure if my warranty still covers it (speaking of, is there a way to check warranty status online?). Please, if anyone has any advice on how to fix or replace a busted key/keyboard, please, let me know!

A:Lenovo Ideapad Y580 - Keyboard Issue

A replacement keyboard (chicony, oki, or dafon are the makers - be sure to look for the manufacturer label and p/n right below the lenovo p/n on the back to get a genuine keyboard) would make a good spares, they are about $30 on ebay. I replaced a broken key on a few different laptops but much prefer to swap out the entire keyboard.  Once a single key goes bad it's likely that more keys will start to fail (note that 'e' is perhaps the most commonly used key on your keyboard because it's the most popular vowel.  Other popular keys like 't' might be failing sometime soon).  So I would suggest you buy a spare keyboard and save it until you can't live without it, the procedure to replace the keyboard is a 10 minute swap. If you want to replace a key, a sharp tipped (xacto-style) knife blade, and a loupe (magnifying lens) are important accessories.  Buy from a reputable site which has good instructions ( http://www.laptopkey.com/ ).  Unfortunately, the key and hinge are manufacturer-specific (OKI, Chicony, Dafon, see above) so you will need to determine it from the guide on www.laptopkey.com.  When I fixed our Acer c720 I also used needlenose pliers to bend a metal tab back into place, the key hinge wasn't seating correctly because the metal tab had bent and was open too wide.  The Acer c720 has a nightmare keyboard to replace with 75 different locking plastic tabs that bind it to the undersize of the palmrest, so i had little choi... Read more

Read other 1 answers
RELEVANCY SCORE 58

I've searched all over from http://www.eightforums.com to lenovo forums. I've called support and they demand a fee to provide me support for my brand new laptop. I'm desperate for a solution because I have exhausted all more likely resources for solutions to my problem. My problem is that the option to burn factory reinstall discs have been removed. In the windows 7 version of this laptop, One Key Recovery provided this option. For win 7 laptops, this allowed people to reinstall the OEM OS on their msata SSD. Now that option is not there. I've burned a system image disc set, I burned a bootable system repair disc. I created a recovery flash drive on a usb stick. Neither of these windows 8 options allowed me to recover to a new drive on the same laptop. I really really hope someone can help me. This is ridiculous.
 

A:Lenovo Y580 preinstalled Win8 machine upgrade to SSD

You could try imaging it with Drive Img XML or similar?
 

Read other 10 answers
RELEVANCY SCORE 58

Hi all;
Need to ask how to hid all the partitions in the factory installed HDD for Lenovo Y580.

This is the scenario.
Firstly, i successfully migrated all of the following partitions:
OEM/Hidden partition,
C partition: boot drive/ program files and data drive &
D partition: containing drivers

from my Lenovo factory installed HDD to the SSD and to use the SSD as the primary boot drive . Now, i plan to use the factory installed HDD as my data drive. (I am using a caddy tray for this whereby i plan to swap out the optical drive and pluck in the Lenovo factory installed HDD). However, for "safety reasons" i do not plan to re-format the entire factory installed HDD but rather to keep those partitions just in case if my SSD fails.

Hence, how do i turn all the three partitions above (in the Lenovo factory installed HDD) to become dormant? I want the computer to boot up from the existing SSD but then to treat the factory installed HDD as the data drive and not to read from any of the three partitions in the factory installed HDD.

ANy ideas on how to accomplish this? By the way, i am planning to use EASUS as my disk partition freeware.

A:Hiding partitions in Factory installed HDD (Lenovo Y580)

You will need to delete all partitions, or you will have boot up problems.

Read other 1 answers
RELEVANCY SCORE 58

Hi all;
Currently, i owned a Lenovo Y580 and defnitely want to downgrade from Windows 8 to Windows 7. Here is a couple of questions.

Question 1:
I am using an Intel SSD (solid state drive) 330 series as my main drive (NOT a hard disk) and just wondering if i need the following driver being:
- Intel Rapid Start Technology for Microsoft Windows 7, and
- Lenovo EE Boot Optimizer?

Question 2: The sequence of loading the drivers.
As i need to re-install all the drivers for Windows 7, please kindly advice what are the sequence for me to load the drivers?

Audio: Realtek Audio Driver for Microsoft Windows 7 (64-bit)
BIOS: BIOS Update for Microsoft Windows 7 (32-bit, 64-bit) - IdeaPad Y580
Bluetooth and Modem: Bluetooth Driver (CyberTan/Broadcom, Liteon/Broadcom, Liteon/Atheros) for Microsoft Windows 7 (32-bit, 64-bit) ? IdeaPad Y580
Camera: Camera Driver (Bison, Chicony, AzureWave) for Microsoft Windows 7 (32-bit, 64-bit) ? IdeaPad Y580
Card Reader: Jmirco Card Reader Driver for Microsoft Windows 7 (32-bit, 64-bit) - IdeaPad Y580
Chipset: Intel Chipset Driver for Microsoft Windows 7 (32-bit, 64-bit) - IdeaPad Y580
Chipset: Intel Management Engine Interface for Microsoft Windows 7 (32-bit, 64-bit) - IdeaPad Y580
General Information: Hotfix for Windows 7 (32-bit, 64-bit) - IdeaPad Y580
Mouse and KeyBoard: TouchPad Driver (Cypress, Synaptics) for Microsoft Windows 7 (32-bit, 64-bit) ? IdeaPad Y580
Networking LAN (Ehternet): Atheros LAN Driver for Mi... Read more

A:Lenovo IdeaPad Y580: Sequence for downloading drivers.

Hi cheesum, Did you look here ? Windows 8 - Downgrade Instructions

Read other 9 answers
RELEVANCY SCORE 58

I was trying to watch a DVD on my laptop and kept receiving an error from PowerDVD 10, saying that it was an invalid media type. After looking online, I noticed that some people said that the update might fix this. So, I downloaded the update and ran the installer. It required that I remove the current installed version of PowerDVD in order to install the patch. After the installer wiped that from my computer and began to install the patch, I received a message stating that "This software can only be installed on a Lenovo system." This was a patch file that the program sent me to, called "PowerDVD_v5630_RiTA10(Lenovo)(PDVDServDelayStartup)_DVD130802-14.exe" After looking at this, I went through the knowledge base and found that there is another file linked for updating the PowerDvd software called "Lenovo.Lenovo_RiTA10_v_DVD110707-07.exe". When I tried to run this I get the following error:"Cannot install the patch.Either this patch is not intended for your version of PowerDVD 10or your system does not havea previous version of PowerDVD 10 installed.The patch installation will abort." Of course I don't have any previous version of PowerDVD 10 installed, because the other patch uninstalled it in order to install. Now I am stuck without the DVD software in this terrible Windows 8 environment. I even tried VLC player and the video is cut off. This is very frustrating. This is on my IdeaPad Y580. Any help would be appreciated. Thanks!






... Read more

A:Y580 PowerDVD 10 Update Won't Install "Not a Lenovo Computer"

Since no one is of help it seems at technical support and I finally had some time for this, I was able to track down how to solve this. I used downloaded the installer for PowerDVD 10 from lenovo and then had to hack it. First run the installer (IN12STW153WW5.exe).After the installer fails, it will have dumped the files into C:\drivers\PowerDVD 10 BD\ (or replace C: with system drive I suppose).Edit the file Custom.ini (right click -> Edit)Change the line CLScan=LEGEND Dragon to CLScan=lenovoSave the file.Run setup.exe You can also skip running the installer and instead use a program like 7zip (or another compression program) to unzip the IN12STW153WW5.exe contents into a folder. Then go into the folder you extracted to and modify the file inside there.

Read other 2 answers
RELEVANCY SCORE 57.6

Good evening, i got my Y580 since 2012 and two weeks back i restored to factory setting. About 3 days later of that factory reset my partition's file system has been changed from NTFS to RAW. I made some homework and it could be because of badly made restoration. I spent literally all day long on Google to figure out how to recover data from HDD. I get some of the most important data so i was not that mad.But here my misery started. I had to obviously do stuff with my SATA HDD and SSD HDD and i mean lot of stuff, i do not even remember, how many hours i spent in diskpart and what i did there. In short, i could not recover from LENOVO_PART because it was deleted by me.I made again some research on Google and it has been told to me that only Total recovery disks from Lenovo can help me. So i ordered them, downloaded them a burned them on DVD because i get .iso ones.After booting first DVD and successful creation of partitions as setup says, i put 2nd DVD and about in 10 mnts setup interupts and say: "Error operation system installation" and its done.I get curious so i picked up my backup Windows 7 install disk and get to the installation. I noticed that Total recovery made 2 partitions, one LENOVO_PART - 25 GB and other one, 4,5 GB aprox. It installs OS on SSD instead of SATA disk.I am out of ideas what could be wrong, because since yesterday's morning (about 20 hours) i spent again on Google and tried to figure out what could be wrong.I tried literally everything, from ma... Read more

Read other answers
RELEVANCY SCORE 57.6

Good evening, i got my Y580 since 2012 and two weeks back i restored to factory setting. About 3 days later of that factory reset my partition's file system has been changed from NTFS to RAW. I made some homework and it could be because of badly made restoration. I spent literally all day long on Google to figure out how to recover data from HDD. I get some of the most important data so i was not that mad.But here my misery started. I had to obviously do stuff with my SATA HDD and SSD HDD and i mean lot of stuff, i do not even remember, how many hours i spent in diskpart and what i did there. In short, i could not recover from LENOVO_PART because it was deleted by me.I made again some research on Google and it has been told to me that only Total recovery disks from Lenovo can help me. So i ordered them, downloaded them a burned them on DVD because i get .iso ones.After booting first DVD and successful creation of partitions as setup says, i put 2nd DVD and about in 10 mnts setup interupts and say: "Error operation system installation" and its done.I get curious so i picked up my backup Windows 7 install disk and get to the installation. I noticed that Total recovery made 2 partitions, one LENOVO_PART - 25 GB and other one, 4,5 GB aprox. It installs OS on SSD instead of SATA disk.I am out of ideas what could be wrong, because since yesterday's morning (about 20 hours) i spent again on Google and tried to figure out what could be wrong.I tried literally everything, from ma... Read more

Read other answers
RELEVANCY SCORE 57.2

Hi everyone,

I'm stuck in a pretty bad situation right now and I have no idea about how to help myself..So recently I've been wanting to 'reset' my Windows 8.1 laptop, & I just cannot because my recovery environment is missing..
First when I got this problem I thought there would be an easy-intermediate level fix like every other problem. (and I love fixing stuff.)

But this one doesn't look like an easy fix or I'm not even sure If there is a fix. So the big mistake I did was, I deleted my "System Recovery Partition".

I have searched everywhere possible and I'm not getting a fix.. I would really appreciate IF YOU GUYS HELP ME!
and another problem is that I don't live in the USA or Canada.I've got a Dell Inspiron 15R 5521, 8GB RAM, intel i5 3317u.

and Dell provides Backup Media to only the people who live in the US and Canada. Please guys, I need a solution.

I have a separate Windows 8.1 Installation Disk, but what I'm scared about is If I install my Windows from the disk, my Dell features would be gone and I don't think I'd be able to have a proper Recovery Environment in the future because this Disk's installation files are nothing related to Dell. Its just a clean Windows installation disk I got from my friend a while ago. I've tried the repair my computer option from the disk and it does not help...

Thank you

A:Recovery Environment Missing -System Recovery Partition Deleted.

Hi ahmedrahamathulla,
Please private message us the system service tag and region you are located so that I can check the available options and assist you further. To send a private message, click on my name and send private message.

Read other 2 answers
RELEVANCY SCORE 57.2

So I have a Lenovo Y580 Ideapad I bought circa 2013/14. I've kept it pretty updated and all since then. It had Windows 8 last time I was able to use it (a few months now sadly). Before this incident, it had already happened before but it would come back on after a few tries. One time it took a whole week of trying to turn it on and off and finally it just popped up again. But this previous time I accidently let it die (I always had it charging once this issue began because I was afraid it would die and do this) and it hasn't been able to boot. I've researched this issue and I've not been able to find one specific answer. So I decided to come here and have some seasoned techs look at my issue personally. I uploaded some videos on youtube in order for you all to get a look at it and what it does when I poke around at it. Also, Idk if it would be of any relevance, but before it died it had had a long standing issue of the touchpad not working. Occasionally it would twitch or work for a few minutes but it was mostly dead (the touchpad I mean). I was never able to fix it (also I just got lazy and bought a mouse).Here is video #1 so you get a basic idea of **bleep** it's doing: https://youtu.be/FwVumwp7MFAHere is video #2 of me poking around on it and doing the restart power thing (thass tha technical name right?) so you can see what it does and doesn't do:https://youtu.be/FwVumwp7MFAIf there is any more info I can give please let me know. I want to try and fix this myself, and am ... Read more

Read other answers
RELEVANCY SCORE 57.2

Recently my computer has been occasionally freezing while I've been browsing online. It doesn't actually get to the point of BSOD but programs will stop working and I eventually won't be able to close or open anything, including task manager.

I tried running CHKDSK to see if that could fix things, (it has crashed since then unfortuantely), doing so somehow filled up my hard drive. I went from having around 700 GB free to only having a couple hundred MBs free. I tried this two more times.

I've attached the dump log as requested as well as the three logs of the CHKDSK that I found in event viewer.

Thanks!

A:Random Freezing Lenovo Y580, Possible Hard Drive errors

Code:
CHKDSK is verifying files (stage 1 of 5)...
Cleaning up instance tags for file 0x1bead.
451328 file records processed.

File verification completed.
807 large file records processed.

0 bad file records processed.

0 EA records processed.

60 reparse records processed.

CHKDSK is verifying indexes (stage 2 of 5)...
580808 index entries processed.

Index verification completed.
0 unindexed files scanned.

0 unindexed files recovered.

CHKDSK is verifying security descriptors (stage 3 of 5)...
451328 file SDs/SIDs processed.

Cleaning up 604 unused index entries from index $SII of file 0x9.
Cleaning up 604 unused index entries from index $SDH of file 0x9.
Cleaning up 604 unused security descriptors.
Security descriptor verification completed.
64741 data files processed.

CHKDSK is verifying Usn Journal...
35120152 USN bytes processed.

Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
451312 files processed. ... Read more

Read other 6 answers