Over 1 million tech questions and answers.

SATA Drive Not Showing in Windows 8.1

Q: SATA Drive Not Showing in Windows 8.1

Just built a new PC with an ASUS X99 Deluxe Mother board. I have installed a new SSD drive and two SATA drives from my old computer, along with one new SATA 2G HD. I plan to migrate data from the old drives to the new one. All the drives show up in the BIOS but when I boot to the OS the new drive and one of the old ones does not show up in Windows. I have installed all the ASUS drivers in windows, and I am now wondering if the OEM version of Windows 8.1 that I purchased has a limitation of how may drives it will support. Can someone please clarify?

RELEVANCY SCORE 200
Preferred Solution: SATA Drive Not Showing in Windows 8.1

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: SATA Drive Not Showing in Windows 8.1

I just checked the Device Manager, and it turns out that Windows does register the drives, however I still cannot see them in Windows Explorer, puzzling, any one have any suggestions?

Read other 4 answers
RELEVANCY SCORE 61.2

Hello, I am wondering why my sata drive wont show up in windows 7, its has xp installed on it but I pulled it out of one machine and put it into my pc with w7 installed and nothing???

asus p5p800 mobo
Dan

A:Sata drive not showing up

Does it show up in the BIOS setup ?

How about Computer Management Disk Management

Read other 9 answers
RELEVANCY SCORE 61.2

..on wink2k install.

I have heard that windows cant format a partition over 130ish Gigs. how do I avoid wasting the remaining 30Gigs of HDD space?

It is going to be the only drive on the system.

the motherboard is Gigabyte GA-K8NF-9 and Harddrive is WDCaviar 160GB SATA 8MB cache 7200.

really would like help on this 1 please
 

A:160 Gig SATA Drive only showing up as 130 Gig

Read other 8 answers
RELEVANCY SCORE 60.4

Hi
I have just bought a second hand PC .
It has sata connections on the Motherboard but when i installed a sata hard drive its not showing.
And i cannot find any setting in the bios that says sata its says ide.
Please HELP
Kind regards
Adamakajohn
 

A:sata hard drive not showing

Read other 16 answers
RELEVANCY SCORE 60.4

Hi,  I have a Lenovo P51 with 2 x 512GB NVMe M.2 SSDs and 1 x 1TB SATA HDD. I have configured the NVMe drive in a RAID 0 configuration and installed Windows. For some reason I cannot get the 1TB drive to show up int Windows, or even in the BIOS. Is there any trick to getting this working, is this a configuration issue or is it possible my SATA drive is just dead!? Thank you in advance. Jonathan.

Read other answers
RELEVANCY SCORE 60.4

Bought a LG Blu-ray internal sata rewriter. Installed it and windows 7 found it first time. So far so good.
Put windows into sleep mode and when I woke it up the sata drive was missing.
The drive was not only missing, but the tray failed to manually open and the activity light did not illuminate.
Drive totally dead. Check all power and sata cables all ok.
Done a full reboot and drive came back ok

This only happens when the machine is put into sleep mode. Sata drivers all up to date and all cables 100%.
Turn the machine fully off or restart and everything works ok each time. Use sleep mode and it fails when you bring the m/c to life.

Has anyone had a similar problem and how can it be put right? I use ( well I did ) the sleep mode quite a lot and this has become a bit of a pain.

Thanks

barnowl

A:Blu-ray sata drive not showing up in explorer.

Hello barnowl. Welcome to the forum.

Is the new optical drive plugged into one of the main SATA connectors (the Intel SATA ports 1-6) or is it plugged into a different SATA port?

Read other 9 answers
RELEVANCY SCORE 60.4

Hi,

I have 2 drives connected to my computer, an IDE and a SATA. They both work fine from within Windows but I was just wondering why only the IDE drive shows up in the BIOS?
 

A:SATA drive not showing in BIOS

Check jumpers on the unit, drivers, or maybe (hopefully not) may be defective?
 

Read other 16 answers
RELEVANCY SCORE 60.4

I have an older asrock dual sata board, bought a hard 250gb barracuda drive, installed it. It shows up in the bios as working, shows up on post as enabled, but does not show up in windows 7. I read around and also tried to assign a drive number to it, but it does not show up there either.

I have tried running it in IDE mode and still get nothing. but I tested the drive in an xp system and it works fine. On one restart after installing the drive it said it needed ULi SATA/RAID Controller (M1689/M1695) driver. I got them, but they wouldn't install, but then I ran them in vista mode, however they didn't fix the issue. Anyone have anything else I can try?

A:Sata drive not showing up in win7

Try right click on computer, manage, disk management and enable the drive.

Read other 6 answers
RELEVANCY SCORE 60.4

Hi,  I have a Lenovo P51 with 2 x 512GB NVMe M.2 SSDs and 1 x 1TB SATA HDD. I have configured the NVMe drive in a RAID 0 configuration and installed Windows. For some reason I cannot get the 1TB drive to show up int Windows, or even in the BIOS. Is there any trick to getting this working, is this a configuration issue or is it possible my SATA drive is just dead!? Thank you in advance. Jonathan.

Read other answers
RELEVANCY SCORE 60

I plugged a new SATA drive into my computer and my BIOS sees it and it shows up in windows xp device manager but it doesnt show up in my computer. How can I fix this (I restarted my computer 10 times).

EDIT>>>>>>>***OH I lied, it's not showing up in device manager.****<<<<<<<
 

A:SATA Drive not showing up on drive list

Read other 7 answers
RELEVANCY SCORE 59.6

Hi guys
My laptop is not displaying my Sara drive in the my computer screen. I have had this issue before with an IDE drive, a strange issue where my external drive only appears in the list when I unplug it and then when I plug it in, it disappears.

With this drive, I get the message the device can perform faster in a USB 2 port (something my prehistoric laptop doesn't have,) then I get the message that the device is ready to use.

If I go into device manager it does appear as a USB Mass Storage Device and I've tried updating driver, rollback, uninstall and everything else I can think which all seem to work ok until I go into my computer and it isn't there.

Any ideas? Thanks
 

A:Sata drive not showing on My Computer screen

Read other 7 answers
RELEVANCY SCORE 59.6

hi my new sata hard drive is showing as a scsi in win7
and it seems to be running slow and making alot of accessing data noises
how can i fix this back to sata
thanks

A:new sata hard drive showing as scsi in win 7 help

With some hard disk controllers it is normal for it to show up as a SCSI disk - particularly if the disk controller is running in AHCI mode, which is preferrable since it allows features such as NCQ. One thing you may want to check is: locate the drive itself under "Disk Drives" in device manager and go into the properties. Select the "Policies" tab and view what is set. For better performance you will want it set to "Better Performance" with both of the boxes checked. Though if you lose power you may run into minor file corruption issues - I personally have not had issues with this. If you disable those check-boxes performance can decrease significantly.
 
-David Betournay

Read other 1 answers
RELEVANCY SCORE 59.2

Hey guys, hoping you can help, i have tried everything...
I have a ASUS CM5570 desktop, this originally had a 640GB SATA drive that crashed. I replaced the drive with an identical one, couldnt get the machine to see it, in other words woulds boot to it, so I tried a different drive, a 120GB SATA drive, I was able to load an image on it and it works fine.....Still cant get the SATA drive to show up, EXCEPT if I connect it via USB...just to try, I got another 640GB SATA drive and had the same result. Any ideas? I am actually repairing this for a friend....Thanks for your help!!

[email protected]
 

A:SATA Drive Not Showing Up / asus cm5570 Desktop

What OS?
Can you see this drive in the BIOS?
 

Read other 2 answers
RELEVANCY SCORE 59.2

Hi guys,
I'm hoping you can help
On Friday I purchased an Intel NUC DN2820FYKH. Installed the correct RAM and HDD and installed windows 8.1 through USB. The system installed the OS and booted normally. However, when I shutdown the mini-pc and later turned it back on, it would not recognise the SATA drive.
I assumed something must have gone wrong so I removed it, formatted it in another machine and repeated the process. Eventually I re-installed windows 8. To check, I shut down the computer immediately, and the same problem occurred.
The initial startup screen (showing F2 for setup) hangs when the drive is plugged in but the bios still shows nothing, I tried mounting the drive in an external caddy and connecting it by USB and the computer was able to see it again.
On Friday I updated to the latest BIOS (fy0039). I rolled the BIOS back to (fy0015) and tried every update since then without luck.
I don't think its a hardware fault as a format fixed it until I booted into windows. Before I booted into windows I was having a bit of trouble finding the right installer and the drive was showing up fine. It seems that it's only once I've booted into windows that the drive vanishes on shutdown.

I am using a trial copy of 8.1 Enterprise from MS website.
Please note I have also posted this question on the Intel forums (https://communities.intel.com/message/254820#254820) but in the past have had quicker and more relevant help from this forum.

Does anyone have any ideas?
Ma... Read more

A:Intel NUC DN2820 SATA Drive not showing in BIOS

Is BIOS set to legacy or UEFI and are you formatting as MBR or GPT? Is strange it won't appear in BIOS though, could be a hardware problem.

Try deleting all partitions and start over.

Read other 8 answers
RELEVANCY SCORE 58.4

Does anyone know how to get a 2.5" SATA External Case to show up(plugged in by usb (2.0))? Ive spent over 2 days trying to figure it out, please let me know if you know how to fix this...... below is the list of my problem & the things ive tried so far

Heres a little back ground:
I used to have a Sony Vaio computer with a Hitachi Travelstar 5K100 Hard Drive. One day the screen just went black on start up and it says "Error loading operating system" & since then ive tried
1) reinstalling Windows XP on the computer.....didn't work

2) recognizing the drive through ms dos.....didn't work

3) Opening the old computer & taking the Travelstar 5K100 hard drive & inserting it in a 2.5" Sata External Case and plugging the usb on to my current computer, it seemed like there was hope as the red light was solid red & when I felt the box, the hard drive seemed to be spinning and working shape, but still.....didn't work

4) I've went the "most popular solution" selected computer, right clicked Manage scrolled down to the left panel & clicked Disk Management, my hard drive is nowhere to be found, only my current drives in the computer so.....didn't work

4.5) I went to Device Manager right clicked all of the usb ports to make sure to turn off the power so that it would save enery or something like that, then restart...... still.....didn't work

5) I tried to find it in bios but I didn't seem to find... Read more

A:2.5" Sata Hard Drive Not Reading(or showing up) Anywhere On My Computer, please help

not seen in the bios

faulty data cable or [connection]

or drive has gone
 

Read other 3 answers
RELEVANCY SCORE 55.6

Hi..

2 days ago I did a re install of windows becuase of hardware upgrade..

Since this new install my new SATA Drive shows up as a detachable item..Like a USB Pen drive..

Any Ideas..

Info in screenshot..
Thx for any info..
 

A:SATA Drive showing up as a "Safe to remove drive" ?

From your sig, you have an nforce mb. That is normal. After you install the nforce drivers, it shows as a removable drive. It is because the board supports hot swapping the drives.
 

Read other 2 answers
RELEVANCY SCORE 54.8

Hi, i'm new to this site but very familiar with technology, i built this machine myself.
im currently running off my old HD but i want to reinstall windows onto my new SATA hardrive (160GB) this one is an IDE. The BIOS and Nvidia Raid config recognize the drive but the windows installation does not. I was reading this thread on this site that i foudn from google

http://forums.techguy.org/hardware/549769-bios-windows-do-not-recognize.html

because he has the same MB as myself but different hard drives. I am currently in the process of trying what he did but i do not have a floppy drive. I only have a 1 CD drive and a 16GB floppy drive. i'm going to try these routes first for the configuartion software but if not im going to see if i can find one laying around.

IF i cant find one and the CD/flash drive don't work is there another way to try the methods described in the previous web link?

*Hard Drives are Western Digital Caviar
 

A:Installation Problems of Windows XP onto SATA HD. SATA Drive not recognized.

Most newerBIOS allow an Alternate method for SATA . . Go into the bios and check the "Sata Operation" setting, change it to "Raid Autodetect/ATA if it is not already. Now try to install XP ( Verbage will vary by manufacturer )
 

Read other 2 answers
RELEVANCY SCORE 54.8

New member here, In the process of completing and setting up a new build. As recommended installed windows 7 prof on Samsung 830 256gb SSD with no problems. During installation was only hard drive hooked up.

Now I am trying to install a Seagate 320gb sata drive to use as a storage drive. The new drive shows up in the motherboard bios but I cannot figure out how to get to get the drive accessable in Windows.

This is a new drive that has never been used nor has it ever been formated. I am lost as to what I need to do to get the drive to a point that I can access and format it so I can impliment it into the system.

Windows installed smoothly on the SSD and all is working fine with the exception of my internet which after a call to my service provider it was determined that my router was to old to properly work with the new system and a new router is enroute at this point.

Can someone walk me through the correct procedure to get this drive online? Thanks in advance

A:New sata secondary hardrive not showing up in Windows

In DIsk Management you'll see it on the drive map and may need to initialize it. Rightclick on the panel at left to see if Initialize Disk is available - if so select it.

If it's already listed in Disk Mgmt, you may need to only add a drive letter: Drive Letter - Add, Change, or Remove in Windows 7 - Windows 7 Forums

Read other 9 answers
RELEVANCY SCORE 54

I reinstalled my Windows Xp Professional yesterday with Service Pack 1a.
However, my HDD still has the 137GB limit and I've tried everything! Does someone here know how to fix this problem?
 

A:HELP!!!Windows Xp Sp1a 320gb Sata HDD only showing 137GB!

Read other 7 answers
RELEVANCY SCORE 52.8

I have the "Safely Remove Hardware and Eject Media" icon in my system tray. One of my drives, a WD20EARS (WD Green 2TB) is listed there. I want the icon to go away since I obviously have no need to eject the drive.

How can I stop Windows from thinking it's a drive that's ejectable?

A:Internal SATA drive showing as "ejectable"

Is this a new drive recently added? Is this drive the primary drive or just for storage? Is this an internal drive or external drive? Did you follow the manufacturers directions for installing the drive if it's an internal HDD.

SATA Hard Drive - How to Install and Setup

Read other 7 answers
RELEVANCY SCORE 52

My primary HDD was failing so I backed it up and replaced it with a larger 1TB drive.  After reinstalling everything the new drive is displaying the same size as my old drive and the extra space available is unallocated.  I can allocate it as
a separate drive but I find that annoying and would prefer to just have my primary C: drive show up with all of the available space.  I formatted the extra space and made it available separately as drive G hoping that I could EXPAND drive C but that option
is not highlighted as selectable on drive C for some reason.  Should I just live with this extra space or is there a way to easily combine C and the new G space?

Read other answers
RELEVANCY SCORE 49.2

Can anybody talk me through installing a slave drive on my gateway gm5483e motherboard model 945gct-m3 made by elitegroup also known as ECS
 

A:windows Vista sata hard drive slave drive

plvness,

It should be as simple as installing a couple of cables. Hopefully you've got a nice flat cable either with the new slave drive, or a spare with the motherboard: it's normally red, but can be other colours, about 1cm wide and 1mm thick. That needs to be plugged in between the drive and one of your SATA slots on the motherboard. They'll normally be black, and unlike most, will have a slight 'L' shape to them. If you get a torch on your motherboard, you should see SATA1 or SATA2 written very close to them. If you've already got a SATA drive, then it should be easy to spot, so just use the second port.

When you start the machine up, go into the BIOS by pressing the appropriate key (it should come up with a screen just after displaying what graphics card you have / testing memory, telling you what key to press - normally F1, F2, F12, Esc or Del),

Then find your way to the 'Boot Order' section (sorry, not sure quite where it'll be for your chipset - but it'll be either on the first screen, or more likely a menu off of it), and make sure that it's still on your CD/Floppy/original drive first and hasn't swapped to your new SATA (it shouldn't have done, but some prefer a SATA drive by default to an IDE).

Any probs or questions, please come back. You'll do fine!

Rich.
 

Read other 2 answers
RELEVANCY SCORE 49.2

SATA drive detected as an atapi drive by windows xp setup.

I’m wanting to install windows xp for backwards compatible with order programs.

1st primary partition is W7 size is 243.71 GB NTFS maximum it will shrink down.
2nd primary partition is setup as 99.97 GB FAT32 (can expanded space later after installing SP2)

After installing XP,
I will use the windows 7 system boot disk and do the following from the command prompt
Bootrec /fixmbr
Bootrec /fixboot
Bootrec /rebuildbcd

Is it ok to install windows xp, since it sees the drive as an atapi and don't need to worry about the sata driver?
Is the boot fix correct?

Thank You
I also added a logical partition which has been removed. Out of curiosity I put a windows 98 setup cd. It didn't see the Fat 32 2nd partition but it did see the logical fat 32 partition as a normal dos primary partition. It makes me wonder on SATA drives if windows 98se can be installed onto logical partition. There was a size limitation, it only saw around 35 GB

A:SATA drive detected as an atapi drive by windows xp setup.

Quote:
2nd primary partition is setup as 99.97 GB FAT32


Why FAT32?



Dual Boot Installation with Windows 7 and XP

SATA Drivers - Load in Windows XP Setup on Dual Boot
SATA Drivers - Slipstream into Windows XP CD

Use EasyBCD 2.0 in Win 7 & Win XP.
EasyBCD - NeoSmart Technologies

Read other 4 answers
RELEVANCY SCORE 48.8

i'm using windows 7, my external hard drive shows up in my devices and printers section but it won't show up as a drive, so i can't view any files in that external hard drive. if i put a memory card in, it shows up as a drive and a flag shows up for when i want to unplug that drive and it asks if i want to remove my external hard drive too.

normally when i turn on the external hard drive it autoplays but it doesn't do that anymore.

i don't understand why it shows up in my devices and printers but not as a drive when i open windows explorer.

i've looked into the external hard drives properties and it all says that the device is working properly.

A:problem with external hard drive not showing as a drive in windows 7

Go into Control Panel (classic view) ---> Administrative Tools ---> Computer Management ---> Disk Management.

In bottom-right pane, if you see a horizontal band representing a drive with no drive-letter assigned to it, that's the cause of your problem. You need to give it a drive-letter:

Right-click that horizontal band and choose "Change drive letter and paths".

Read other 2 answers
RELEVANCY SCORE 48.8

I have Windows XP sp2 on a Hitachi 80 GB SATA drive partitioned as drive C: and drive E: with ntfs. The operating system is on the C: partition and other programs are on the E: partition. I purchased a larger 250 GB Hitachi SATA drive and installed it as drives D: and F: I want to transfer Windows xp from the 80 gb drive to the 250 gb drive and activate the 250 GB drive as the boot drive.

I copied the files from the E: partition to the F: partition. How do I transfer Windows from the 80 gb drive to the 250 drive and boot from the new drive.? I want to use the 80GB drive as a Linux drive and multiboot Windows xp and Ubuntu Linux .

Thanks,
Romeo Dais
 

Read other answers
RELEVANCY SCORE 48.8

Hi, Is this possible? I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.

I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in. I'm pulling my hair out here!!!

My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have win7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)

Help!!

A:Install Windows 7 with Sata Hard Drive and IDE DVD ROM Drive

Have you checked out all of our Questions list ?


Questions to use for help with Installation Issues


One of my favorite tips is to pre-format the HD on another computer to the partitions that you want for the new install on the new computer. Sometimes SATA drivers are required during install either from Disc or USB flash drive containing the correct Sata drivers needed.
Also check your Bios setting for AHCI, SATA, IDE.

Read other 9 answers
RELEVANCY SCORE 48.4

i have a freecom external hard drive. it was working fine until one day it decided to stop working.

this light on the drive lights up but i can't hear anything working inside it. and now it won't show up as a drive when i open windows explorer.

please help?

A:External hard drive not showing as a drive in windows 7

Hi have you tried it in another computer to see if it works there

Read other 12 answers
RELEVANCY SCORE 47.2

I want to transfer data from my hard drive in my laptop (Lenovo Y480) to a hard drive in my desktop. the cables for the sata adapter do not fit the hard drive from the laptop. Is there a different form for a 2.5 hard drive and a 3.5 hard drive?
 

A:sata to usb adapter cable dosen't fit sata hard drive in laptop?

Does the drive have an adapter need to remove to expose the SATA conenctors? I don;t see anything about the Y480 not having a standard SATA drive and laptop and desktop SATA connectors are the same.

Maybe post pictures of both the drive and your SATA cables.
 

Read other 2 answers
RELEVANCY SCORE 47.2

I have to replace my original hdd on my 9 year old Dell XPS 8100. The desktop  has an i7 chip so I'd hate to replace it with a new i7 PC because they are expensive.The bad drive is an esata drive. I notice that current crop of hdd's seem to be sata III drives. Will the old Dell PC mother board  on the desktop support the new sata III drivesIf I replace the bad hard drive would I be able to restore the W7 OS and all my data by using a macriumbackup file on the desktops external  backup drive?
Thanks for your help!

A:Can old oem sata hard drive be replaced with a new current generation sata III hdd on an 8 year old xps 8100 with an i7 chip??

Any 3.5" SATA drive will work.
As long as the system is in working order, and you purchase a SATA data cable for the additional drive, you should have no trouble cloning the existing drive to a new one.

Read other 2 answers
RELEVANCY SCORE 47.2

Hi, hopefully should be straight forward enough...

I have just bought one of these space saving Acer Revos which does not come with an Optical drive.

I have a Blu-ray reader (dvd writer) which is SATA, but the Revo only has USB or eSATA.
So... i was wondering what is needed to get this (SATA) drive to work via eSATA or usb?

Is it as simple as a SATA to eSATA cable or will this not give the necessary power to the drive?

Or do i need an eSATA enclosure, and if so what size for an optical drive 5.2?

Cheers for any help.
 

A:New PC with no optical drive or SATA connection (can i use a SATA drive in it?)

Ya no problem use it. For more details contact us at www.sacatech.com
 

Read other 1 answers
RELEVANCY SCORE 47.2

Hi guys,
My old A215-S4747 has a Toshiba SATA drive (200 GB, model name: MK2035GSS) in it. However when i look at device manager, the drive appears to be configured over IDE bus, rather than SATA bus. I know, old motherboards were providing such option in order to eliminate compatibility issues with older OSes like XP, however this machine has Vista (SP2) by factory default.

I wanted to upgrade the drive (it's really aged) with a new faster SATA drive, but i couldn't find any option to configure it as SATA (not IDE) under BIOS!

I'm attaching screenshots here, and really disappointed about it. If i bus brand-new SATA drive, will it be forced to run over IDE channel (UDMA 5 max) which is really slower than SATA.

It seems Toshiba left no such option in BIOS and configured drives automatically as IDE eventhough they're actually SATA-provided.

Screenshots here:
https://i.hizliresim.com/gOlMEZ.jpg

https://i.hizliresim.com/Z9Nomk.jpg

https://i.hizliresim.com/lOY5mE.jpg

https://i.hizliresim.com/VrpWmP.jpg

https://i.hizliresim.com/nOP0ZR.jpg

Thanks!

Read other answers
RELEVANCY SCORE 46.8

I need to reinstall my Windows 7 from cracked to legal. My PC has 3 HD in it. 200 GB SATA, 200 GB Primary IDE and 160 GB Secondary IDE. It is currently loaded on the 200gb Primary IDE and the other 2 are for backup and saving data. Would I be better off installing Windows 7 on the SATA drive and using both IDE drives for backup and saving data? If so is the easiest way to just disconnect the IDE drives until Windows 7 is installed then format the original OS drive to use for backup?
 

A:Windows 7 SATA or IDE drive

My computer boots to W7 pro SP1, 32 bit, in 60% of the time, using a 120 GB 5 series Intel SATA drive, compared to an 80 GB Western Digital 7200 rpm Cavier Black Drive.
AMD II x2 3.6 GHZ cpu
4 GB ram

I have no data; only anecdotal information that all tasks [ I am NOT a gamer ; no offense intended if you are ] will be [ edit are for me end edit ] faster. W7 updates zip by on the screen.

Your computer will boot faster with the boot drive being smaller than the data drives.

RF123
 

Read other 1 answers
RELEVANCY SCORE 46.8

I have a sata harddrive in my pc and bought another one today plugged it in the spare sata connection slot and when i turn the pc on it loads up fine goto my computer and it isnt there, now i dont know if i need to have it set so there needs to be a jumper in it, theres no jumper indicator on the hdd itself so i tried it in them all and its not showing up still. Ive went to disk management and it isnt showing up there either.

Its a SAMSUNG hard drive the model number is HD320KJ SERIAL ATA 3GB/S

any help would be apreciated with this issue

thanks you
 

A:Sata Harddrive not showing up

Read other 16 answers
RELEVANCY SCORE 46.8

I installed a M2.SATA drive in my ProBook 430 G2 as boot device. I wanted to install a normal harddisk also as a data drive, but the HDD does not show up. When I connect the HDD to another computer it is working fine. The SATA-connector in the ProBook is also working because before there was only there a HDD as boot device installed.What may be wrong?

Read other answers
RELEVANCY SCORE 46.8

Hi all,

This is my first post so please be gentle.

I ran the Windows update on close last night and today my system will not re-boot, my bios cannot see my SATA2 HDD.

I have tried repair in windows but no good as HDD is not there.

I have tried swapping the SATA sockets etc but they all say none detected.

I tried MOBO jumper reset with battery out.

The HDD is spinning so the power is working.

Please help I am lost

A:SATA HDD not showing after update

Originally Posted by mouthrax


Hi all,

This is my first post so please be gentle.

I ran the Windows update on close last night and today my system will not re-boot, my bios cannot see my SATA2 HDD.

I have tried repair in windows but no good as HDD is not there.

I have tried swapping the SATA sockets etc but they all say none detected.

I tried MOBO jumper reset with battery out.

The HDD is spinning so the power is working.

Please help I am lost



Hi mouthrax

Make sure that you do not have RAID selected in the BIOS it should be set to IDE

I hope this helps

Pooch

Read other 9 answers
RELEVANCY SCORE 46.8

Just installed new motherboard, two hard drives (SATA). After installing Windows 7 I can only see one of the hard drive. I think they both show up on the startup stuff. What's happening? Gigabyte Motherboard, Award bios. I have two old hard drives (IDE) that I can see. One IDE header. 5 SATA headers.
 

A:Only one of two SATA drives showing in 7

Read other 12 answers
RELEVANCY SCORE 46.8

Hi,

Firstly, I changed all my settings in my bios to AHCI and my Jmicron controller 363 to AHCI + IDE. Now, my DVD drive won't show up in my device manager and there are multiple controllers under IDE ATA/ATAPI that weren't there before. Any ideas on how I can get the DVD drive to work under SATA and fix the multiple channels under the IDE ATA controllers?

Thanks. The pic is below.

A:SATA DVD not showing / Something wrong here?

Follow the steps in this article to toubleshoot.

Your CD drive or DVD drive is missing or is not recognized by Windows or other programs

Read other 1 answers
RELEVANCY SCORE 46.8

ive recently reformatted my computer which is running off a 40gb IDE drive and i have a second 80gb SATA. the sata drive wont show up in my computer. i dl'ed the sata raid drivers and still nothing. this has happened before but i cant seem to remember how i fixed the problem. i have an ECS pm800 m2 mobo w\ bios drivers v1.2e and i see the second hd in the bios. it has recently been formatted as well. thanks.
 

A:Sata hd not showing up in winxp

i got it by going into comp management and re partioning it. thanks tho
 

Read other 1 answers
RELEVANCY SCORE 46.4

Hi guys,
My old A215-S4747 has a Toshiba SATA drive (200 GB, model name: MK2035GSS) in it. However when i look at device manager, the drive appears to be configured over IDE bus, rather than SATA bus. I know, old motherboards were providing such option in order to eliminate compatibility issues with older OSes like XP, however this machine has Vista (SP2) by factory default.

I wanted to upgrade the drive (it's really aged) with a new faster SATA drive, but i couldn't find any option to configure it as SATA (not IDE) under BIOS!

I'm attaching screenshots here, and really disappointed about it. If i bus brand-new SATA drive, will it be forced to run over IDE channel (UDMA 5 max) which is really slower than SATA.

It seems Toshiba left no such option in BIOS and configured drives automatically as IDE eventhough they're actually SATA-provided.

Screenshots here:
https://i.hizliresim.com/gOlMEZ.jpg

https://i.hizliresim.com/Z9Nomk.jpg

https://i.hizliresim.com/lOY5mE.jpg

https://i.hizliresim.com/VrpWmP.jpg

https://i.hizliresim.com/nOP0ZR.jpg

Thanks!

Read other answers
RELEVANCY SCORE 46.4

I have 2 IDE HDs installed and added SATA drive lately. SATA runs in IDE mode in CMOS. Problem is, even though SATA drive is recognized by BIOS, Disk Manager, Norton Ghost & System Works, it doesn't show in My Computer, causing problems with saving and opening files. Tried a couple of tricks (changing the drive letter,disconnecting & reconnecting the drive, reformatting etc. ) nothing seems to work. I use this SATA drive for storage and for now I have to drag the files down there manually.
I don't know if it's of any importance, but I have nVidia GeForce graphics card onboard.
Has anyone encountered this kind of a problem ?
Thanks Carl

Read other answers
RELEVANCY SCORE 46.4

I'm wanting to upgrade to a better mainboard. I don't know much about SATA, but I've been using a SATA I hard drive very successfully through a pci controller card.

My question: If I get a new motherboard with SATA II headers, will it readily accept my SATA I hard drive? I can see how the reverse might not work, that is, not being able to connect a SATA II hard drive in a SATA I header, but maybe I'm wrong on that...?
 

A:Will SATA II mobo headers accept SATA I drive?

Yes, sata 3gb/s ports(commonly called sata II), are designed to be backward compatible. I'm using a sata I hd on my sata 3gb/s port on my chaintech vnf4/ultra, so yeah, it works.
 

Read other 3 answers
RELEVANCY SCORE 46.4

The time has come for me to wipe the hard drive and re-install Windows 7 following a recent disastrous download that's effectively knocked out my Internet Explorer 11 and rendered Internet browsing difficult. My system has since become unstable and progressively slow and unfortunately, for some reason, I am unable to Restore to any previous installation. As I have loads of files I want to access, I've decided get a new Hard Disk and run the original H/drive (if possible) from a SATA drive Docking Station. So essentially, I would like to know if my Dell DXC061 will run and support a new Seagate 1Tb SATA3 7200rpm Barracuda. My BIOS is Ver. 2.4.0 dated 05/24/07. I have opened the CPU to see that the current drive connectors appear similar to those on the SATA Docking Station and think my old drive will fit it. However, it's now occurred to me that its possible the newSATA 3 drive may not be compatible with my BIOS or Motherboard. Any help or comments please? Incidentally I have most of my most useful files backed up on an external drive, so all, hopefully is not lost.

A:Upgrading Hard Disk from SATA to SATA 3 Drive

You need a SATA3 port to connect a SATA3 HDD to be fully compatible.

Read other 6 answers
RELEVANCY SCORE 46.4

I have a Dell Inspiron 1721 running Windows XP Professional and my CD RW + DVD R drive is not showing on my system how can i fix this so i can upgrade to Windows Longhorn Build 4074.  

A:CD RW+ DVD R Drive not showing up in Windows XP

I would try method 2 and 4 here. Be careful when editing the registry. Microsoft no longer offers the automatic fixit utility.
 
Also see here. Make sure the optical drive is also detected in BIOS.

Read other 1 answers
RELEVANCY SCORE 46.4

I've installed Windows 7 on two different partitions, both are on the same drive. When I boot into each version of windows they both show C:\ as the partition. Each one has a different login password, so I know that I'm logging into two different windows on two different partitions.

When on Windows(1) another installation of windows is shown on D:\
When on Windows(2) another second installation of windows is also shown on D:\

But I've installed each Windows on two different partitions.

Why are they both displaying that they're installed on C:\ on both windows 1 and windows 2? Crazy.

A:2 Windows, both showing C drive??

I believe Windows 7 will show the system volume as C for each OS, even if that partition/drive is different.

I have to ask, because there is always a better way...but why on Earth would you burn an extra license installing the same OS on the same computer twice?

Read other 9 answers
RELEVANCY SCORE 46.4

I have a Dell Inspiron 1721 running Windows XP Professional and my CD RW + DVD R drive is not showing on my system how can i fix this so i can upgrade to Windows Longhorn Build 4074.  

A:CD RW+ DVD R Drive not showing up in Windows XP

I would try method 2 and 4 here. Be careful when editing the registry. Microsoft no longer offers the automatic fixit utility.
 
Also see here. Make sure the optical drive is also detected in BIOS.

Read other 0 answers
RELEVANCY SCORE 46.4

I have quite a prediciment here. I had some tech guys move my computer parts into a new case, and now my DVD drive won't show up in windows at all. I've tried all kinds of registry hacks I found on google, the microsoft "fix it" program, just about everything. Even made sure that the IDE cable is secure on both ends (motherboard and dvd drive) and the drive is set to master on the jumper switch. I can open the dvd drive and put a cd in, but the green light will just blink for a few seconds and then do nothing. What's going on here and how can I fix it? I'm desperate for a solution!
 

A:DVD drive not showing up in windows 7

Read other 7 answers