Over 1 million tech questions and answers.

Cannot set UEFI boot order to CD Windows 8.1 HP Pavilion

Q: Cannot set UEFI boot order to CD Windows 8.1 HP Pavilion

Windows 8.1: HP Pavilion 2475ea Desktop PC.
I have Secure Boot turned off. I have Legacy Boot turned on, but do not think that is needed.

This link gives me instructions to boot from CD but they seem not to make sense from No 2...
h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&docname=c03659945

...in that at 5-6-7 it seems to require me to select the CD then boot to Windows from HDD then restart and do the same again, but this time select CD again, or something??
I expected to set the device, then restart the computer and it would boot from the device, not restart Windows as described.
I was able to boot from a WinPE 4b CD.

I then decided to try changing boot order in the UEFI BIOS. From then on the HP (F9) described menu showed 'Windows Boot Menu' only under UEFI Devices. I could only boot from CD after putting the order back to 'Windows Boot menu' at the top of the order list; after which, as long as the CD was in the drive the (F9) list showed the CD drive as selectable to boot from.

I find this, after 30 years of normal BIOS, to be confusing.
Can somebody help please?

RELEVANCY SCORE 200
Preferred Solution: Cannot set UEFI boot order to CD Windows 8.1 HP Pavilion

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Cannot set UEFI boot order to CD Windows 8.1 HP Pavilion

You can boot any DVD/CD/USB disk with WinPE4 in UEFI mode, with Secure Boot ON & UEFI mode ON.

Read other 7 answers
RELEVANCY SCORE 93.6

My HP Pavilion 15-ab238na always resets the UEFI boot order when it (re)starts, is there a way to prevent this? I've just added a SDD to the notebook (in the DVD reader slot) and cloned the Windows partitions to it, so I have 2 bootable Windows discs in the notebook (SDD and HDD).  I'd like to leave both of them there for a while. The notebook has recognized the new Windows system on the SDD and added it to the UEFI boot sequence. The original HDD is first in the UEFI boot order and the SDD is second. I've been trying to make the notebook boot from the SDD by changing the UEFI boot order. No matter what changes I make to the UEFI boot order, when I restart the notebook the boot order is reset to it's original state, with the HDD first and the SDD second. I've tried using both EasyUEFI on Windows and efibootmgr on Ubuntu (run from a DVD) to change the boot order. I can make it boot from the SDD by configuring the Windows Boot Manager, but I'd prefer to do it by changing the UEFI boot order. Is this possible?

Read other answers
RELEVANCY SCORE 73.2

I suppose this can be different depending upon the motherboard or PC manufacturer but hasn't it been your experience that the boot order is most often the CD/DVD ROM drive as the first boot device by default when you receive a new computer?
 

A:UEFI Boot order...

Well for convenience most people set CD/DVD as first boot item. However if you are security conscious, you would set HD to first boot plus set a password for the bios. The reason is that somebody who has physical access to the computer can boot a Linux LiveCD and bypass all Windows security and access your files.
 

Read other 2 answers
RELEVANCY SCORE 73.2

I have no BIOS, only 8 boots up but instead of the Windows logo, with the ASUS. How will I boot from CD? I have configured an EasyBCD program to allow me to choose, but what if 8 cannot boot?

A:UEFI boot order?

When you say you have no bios - do you mean you can't see any way of getting into bios/efi setup options?

There's probably a key press to do it.

Did you get a manual with that thing ?

Read other 4 answers
RELEVANCY SCORE 73.2

Hi everyone, I am am trying to downgrade my OS from Windows 10 back to Windows 8.1 (I upgraded to Windows 10 more than a month ago so I can't go back automatically to my orevious OS).in order to do that I am about to make a "clean installation".followed by Microsoft support center I created an image of e OS 8.1 onto a sub stick.in order to kick in the setup of the OS 8.1 saved on the USB stick I was trying to set up the UEFI boot order to "USB Diskette on key/USB Hard Disk" but nothing happen.Basically, what have to to make the 8.1 on he USB stick being installed and replace the Windows 10?  thank you very muchbest martino

A:UEFI boot order

Hi Martino198, How to Uninstall Windows 10 and Downgrade to Windows 7 or 8.1  If you?ve upgraded a PC to Windows 10 ? not performed a clean install, but an upgrade ? you?ll have an easy option that lets you revert to the last version of Windows. To access this, open the Start menu and select Settings. Click the ?Update & security? icon and select ?Recovery.?You should see a ?Go back to Windows 7? or ?Go back to Windows 8.1? option. Click the Get started button to get rid of your Windows 10 install and restore your previous Windows install. Microsoft will ask you why you want to go back.If it?s been over a month ? or if you?ve run the DIsk cleanup tool and removed the ?Previous Windows installations? files or deleted the C:\Windows.old folder by hand ? you?ll no longer see this option. Windows 10 appears to automatically remove the old Windows installation files after a month to free up space.  How to Restore Your Files From the Windows.old Folder After UpgradingIf you have ever upgraded your Windows installation without formatting, you have probably come across the Windows.old folder which hoThis works because Windows 10 stores your old Windows installation in the folder named ?C:\Windows.old? on your computer. You can see this folder in File Explorer, though you shouldn?t attempt to delete it from here. You can also browse the Windows.old folder and restore files from it. Obviously, stori... Read more

Read other 1 answers
RELEVANCY SCORE 72.4

I have disabled the secure boot option and enabled the Legacy boot option which allows me to boot from USB stick. However, UEFI takes precendence over Legacy boot and I don't want that. For a little school project that we are running we want to run the educational OS Sugar on Stick(on a USB stick) to run straight from the stick instead of kids pressing 3-4 different buttons to get to that.  In short, I want to change boot priority from UEFI first to Legacy. Let me know how to do it? Whether its possible or not? If not, then I don't need these 4 laptops that I ordered and I will return the laptops. Thanks a lot in advance. -Ritesh

A:UEFI vs Legacy Boot order

Follow these instruction on how to properly disable secure boot:http://support.hp.com/gb-en/document/c03653226

Read other 9 answers
RELEVANCY SCORE 71.6

Hi guys, I'm trying to properly dual-boot Windows 10 Edu 64bit and Kubuntu 16.10 64bit. The problem is that on startup it's impossible to start GRUB, Windows is loaded automatically. Is there a way to change UEFI boot order? I tried several methods but Windows always overrides my changes; I managed to load GRUB only once by renaming the Windows OS Loader path to the GRUB one, but after I booted to Windows once again, it overrode my settings creating a new Windows OS Loader entry. These are the methods I've already tried: Renaming the path as I said up here through bcdeditUsing EasyUEFI to change boot orderUsing efibootmgr in KubuntuUsing boot-repair in KubuntuUpdating GRUB in Kubuntu While on my desktop I have a BIOS setting that lets me change UEFI boot partition, I don't have anything similar on this laptop. Let me know, thanks.

Read other answers
RELEVANCY SCORE 71.6

When I access my UEFI during startup, the Boot Priority section is either empty or shows unrelated drives attached. I can select the drive from which to boot by clicking on the Boot Menu, then clicking on the drive desired.

I purchased a new Intel SSD and installed it as the "C" and "D" drives and was happily booting from that SSD until I added new HDDs to my system. I now have four HDDs plus the SSD. One of those HDDs still contains the original Root C bootup and Windows 8 system on it. I frequently now find the system, reason unknown, may choose to boot from the HDD rather than the SSD.

I cannot find the method for directing the UEFI bootup menu/priority steps... my goal is to have the computer boot from the SSD, which if it were to fail, then would secondarily boot from the HDD original Root C.

The computer arbitrarily changes the SSD from drive designation "C:" to "J:" and the HDD to "C:"... how to specify the SSD as the "C:" unless it fails or is removed?

the computer system info:

Thank you in advance. DLGMEX

A:Boot Order UEFI ASUS P8 Z77-V How to change?

Enter your BIOS and set your SSD as Boot Option # 1 as shown:

Or set your optical drive as boot #1 and set your ssd as boot #2.

Read other 22 answers
RELEVANCY SCORE 71.6

Heys guys, I'm hoping I can get some help with this. I have a Lenovo y410p. It has 2 drives, one with the OS (120GB SSD 40mm N.2 NGFF) and a data drive(1TB HDD)
My computer recently crashed when I was installing a piece of software, (Bentley MX Road, it's a road alignment package.) When I restarted my laptop I was greeted with a lovely message informing me that winload.efi was corrupt. That was fine so I did a bit of research to fix it involving getting a recover DVD and going to the command prompt to rebuild BCD. That didnt work for me as it didnt detect windows. I tried to see what was up with the SSD using DISKPART & CHKDSK. Neither of these showed the SSD. They only showed the HDD
So now to take a step back, In order to get the recovery DVD to boot I had to change the boot option in the BIOS from UEFI to legacy support. This showed me a list of bootable devices (HDD, SSD, DVD etc.) When UEFI is selected only one option is available which is the Windows boot manager. This is followed by the serial number of the HDD which does not have any OS on it.
I have tried using f12 which give me the windows boot manager option and nothing else. When I select this, it boots me into the error message.
So to get to the root of this, how can I change the boot order when the BIOS is set to UEFI so I can repair the winload.efi file on the SSD. Thanks for any help.

A:Changing boot order when BIOS is set to UEFI

You change it the same way as before. Usually you can do it withe the OEM software installed on Win8.

You may have to turn off Fast Boot if set.

Read other 3 answers
RELEVANCY SCORE 70.8

I need to change my UEFI or legacy of HP pavilion 15 notebook laptop. pls help

A:in need settings procedure to change my UEFI boot order hp p...

Hi,  To change boot order, see this : Configuring the Boot Order in the System BIOS  Regards Visruth 

Read other 1 answers
RELEVANCY SCORE 70.4

I have an Inspiron 5759 laptop with Win 10 home.  I want to add a boot option for a CD/DVD.  I can access the UEFI but can't figure out how to add this option to the UEFI boot sequence.

Read other answers
RELEVANCY SCORE 70

Hi, all.
 
As the title says, I have Windose 8 on a 64-bit Samsung laptop and I need to change the boot order to test if a bootable Linux CD works, which I intend to use if it does (or download it again and make a new one and use that), but I can't change the boot order from the OS to the DVD ROM drive.
 
Another thread online said something to do with Legacy but I don't know what that is nor how to disable it to see if I can enable and select booting from the DVD ROM drive.
 
Please help. Thanks.

A:Unable to Change Boot Order in Samsung Laptop UEFI

I don't know what model the Samsung is but in UEFI settings make sure SecureBoot is disabled. If there is a setting for FastBoot or QuickBoot then disable it also.
 
If there is a Mode listed set it to UEFI/Legacy. 
 
Reboot and enter UEFI. Can you see change your boot device priority?
 
http://superuser.com/questions/521389/how-do-i-boot-my-samsung-laptop-from-a-cd-dvd
 
On a Samsung tapping Esc at boot may give you a boot menu that will let you select a boot device but SecureBoot should still be disabled.

Read other 1 answers
RELEVANCY SCORE 70

We have 3000+ new computers to be set up with windows 10, and we need to change the boot order on these computers. To do this we use a script that calls BiosConfigUtility64.exe -s -f"<filename.txt>". This works fine on other settings (like LAN / WLAN Switching) but the boot order will not stick.This is the output from the command:  Command used: BiosConfigUtility64.exe /set:"HP ProBook 440 G3.txt"Result:<BIOSCONFIG Version="4.0.15.1" Computername="MININT-E26EISQ" Date="2016/05/20" Time="10:33:15" UTC="-8"><SETTING changeStatus="pass" name="UEFI Boot Order" reason="Success" returnCode="0"><OLDVALUE><![CDATA[HDD:USB:1,HDDATA:1,NETWORK IPV4:EMBEDDED:1,NETWORK IPV6:EMBEDDED:1]]></OLDVALUE><NEWVALUE><![CDATA[HDDATA:1,NETWORK IPV4:EMBEDDED:1,NETWORK IPV6:EMBEDDED:1,HDD:USB:1]]></NEWVALUE></SETTING><SETTING changeStatus="pass" name="LAN / WLAN Auto Switching" reason="Success" returnCode="0"><OLDVALUE><![CDATA[Disabled]]></OLDVALUE><NEWVALUE><![CDATA[Enabled]]></NEWVALUE></SETTING><SUCCESS msg="No errors occurred" /><Information msg="BCU return value" real="0" translated="0" /></BIOSCONFIG> When the computer reboots it 'forgets' the settings for the boot order, and reverts back to defaults.The computers are delivered with bios version 1.06, but upgrading to 1.11 brings no change.I have seen on one occation that the boot order list was empty when... Read more

Read other answers
RELEVANCY SCORE 70

Hi, I have a HP Pavilion 15 n204tx Notebook with Windows 8.1 running. Now I would like to install a SSD by replacing the optical drive. I am not an expert and I did some digging. I heard that before I install Windows to the new SSD, I should change settings in BIOS to AHCI concerning my hard drive. My Problem now is that I can't find it in BIOS. Where can it be found and maybe changed? Is it really needed to change BIOS mode? What are my alternate choices?

A:UEFI BIOS Access, Changing Boot Drive Order To SSD

Hi, No, you can't do that. You have to swap SSD and HDD. Put old HDD to the caddy. Regards.

Read other 1 answers
RELEVANCY SCORE 69.2

We are pushing a new image this summer but we need to make boot and file system changes, my boss wants me to automate this process. the goals are to desable legacy in bios, enable UEFI, select PXE,  change UeFI boot order (usb,cd, NIC, Hd) using the Bios configuration tool at command line. I have the config.ini file from the bios. can I make all those changes at once or do I have to reboot in between enable UEFI and changeing the boot order The why: we are moving from MBR to GPT with the new image Win10, and we save time on the boot by disabling legacy. The boss says so. (the short answer) any tips or suggestions welcome.

Read other answers
RELEVANCY SCORE 69.2

We are pushing a new image this summer but we need to make boot and file system changes, my boss wants me to automate this process. the goals are to desable legacy in bios, enable UEFI, select PXE,  change UeFI boot order (usb,cd, NIC, Hd) using the Bios configuration tool at command line. I have the config.ini file from the bios. can I make all those changes at once or do I have to reboot in between enable UEFI and changeing the boot order The why: we are moving from MBR to GPT with the new image Win10, and we save time on the boot by disabling legacy. The boss says so. (the short answer) any tips or suggestions welcome.

Read other answers
RELEVANCY SCORE 66

I recently purchased a Pavilion PC with Windows 10 and needed to turn AMD-v on. However, when I try to access UEFI settings through the advanced reset I only get black screen for about a minute, and then the PC just boots into OS. Anyone has any ideas on this one? Thanks

Read other answers
RELEVANCY SCORE 66

Hi, I have a HP Pavilion G6 1323tx machine. I want to disable UEFI boot but there is no option in boot menu.   

A:Disable UEFI boot in HP Pavilion G6

That means it is not UEFI (secure) boot to begin with but legacy boot. If that is the result you want anyway you are good. 

Read other 1 answers
RELEVANCY SCORE 65.6

Just got this unit, it is showing "Error: No boot disk has been detected or the disk has failed".
I went into the boot order trying to boot of a win7 disk, as this first pic shows
 
http://i493.photobucket.com/albums/rr298/mikehende/20141029_154511_zps66320613.jpg
 
the default is set to UEFI, I move the arrow down to "Legacy Boot Sources" as shown in pic 2 below but when I hit ENTER nothing is happening?
 
 
http://i493.photobucket.com/albums/rr298/mikehende/20141029_154529_zps7319f8e6.jpg

A:HP Pavilion 23 boot order not changing?

It's ok, I got it to work but now other problem sheesh. I had thought it was the wireless mouse which was not working but attaching a wired USB mouse is also not working, I am at the Install Windows screen but not seeing a mouse cursor, any ideas please?

Read other 20 answers
RELEVANCY SCORE 64.8

Hi, I'm increasingly sick of Windows 8, but I haven't found any way of persuading my laptop to boot into Ubuntu without going back into Windows every time I restart, and then holding down Shift when I restart in order to be able to get the boot menu up at all. It seems like UEFI always takes priority over 'legacy' boot order, UEFI always excludes Linux, and as long as Windows is installed, UEFI kicks in and avoids the boot choice I want to use. But that can't be right. I'm convinced that HP is a competent hardware manufacturer, and it must be possible to dual boot without going through Windows every time. So what am I missing?

A:Need to change OS boot order on HP Pavilion 15-b135e (to run...

Hi: Please read the info at the link below.  You have to enable legacy mode and disable secure boot in the BIOS for best results. http://support.hp.com/us-en/document/c03736054

Read other 6 answers
RELEVANCY SCORE 64.8

I have a Dell XPS 8700 that failed Windows 10 anniversary update until UEFI secure boot was turned off. It apparently then completed but I cannot re-enable secure boot without the same boot problem advising
Recoveryyour pc/device needs to be repaired / during Windows 10 anniversary updateAn unexpected error has occurredError Code 0xc0000185you'll need to use recovery tools.   Is there a solution to enable UEFI secure boot ?
 I am using a Dell XPS 8700 pc with an SSD drive. The Windows 10 update was installingthen after one of the reboots the error above  The pc was running prior to the update and had UEFI OS , secure boot enabled,  no prior problems.I attempted to do any of the safe mode boots but none would proceed.Disabling the UEFI safe/secure boot mode apparently let the install continue and the das it did before with I believe completion of the installation of Windows 10 anniversary update.PC now shows Windows 10 home Ver 1607 ..
The problem returns if I enable UEFI secure boot and the PC stops. I would like to determine a wayto locate the problem or issue. related to the secure boot.  Using the media creation tool may justrepeat the problem once secure boot is re-enabled.
 Dell lists that they have tested XPS 8700 with this update and have not indicated problems no mention of secure boot issue.

A:XPS 8700 needed UEFI secure boot disabled to complete Windows 10 anniversary update can't enable UEFI secure boot now

rdubayah,
If your computer was running WIndows 10 without any issues prior to downloading the Anniversary update, then you would not have had to change any settings in the bios to install the update.The UEFI and Secure Boot settings are to enable booting with a USB or DVD to install Windows.
Disable Legacy Boot Mode and Enable UEFI
Start the computer and TAP the F2 key to enter the bios. Once in the bios Press F9 to Restore the bios to the Default Settings. F10 to save changes and exit. You could have a hardware problem. To run a hardare diagnostics on the computer you would start the computer and TAP the F5 key. Insert a cd/dvd in the optical drive for running the diags.

Read other 4 answers
RELEVANCY SCORE 64.8

I have a Dell XPS 8700 that failed Windows 10 anniversary update until UEFI secure boot was turned off. It apparently then completed but I cannot re-enable secure boot without the same boot problem advising
Recoveryyour pc/device needs to be repaired / during Windows 10 anniversary updateAn unexpected error has occurredError Code 0xc0000185you'll need to use recovery tools.   Is there a solution to enable UEFI secure boot ?
 I am using a Dell XPS 8700 pc with an SSD drive. The Windows 10 update was installingthen after one of the reboots the error above  The pc was running prior to the update and had UEFI OS , secure boot enabled,  no prior problems.I attempted to do any of the safe mode boots but none would proceed.Disabling the UEFI safe/secure boot mode apparently let the install continue and the das it did before with I believe completion of the installation of Windows 10 anniversary update.PC now shows Windows 10 home Ver 1607 ..
The problem returns if I enable UEFI secure boot and the PC stops. I would like to determine a wayto locate the problem or issue. related to the secure boot.  Using the media creation tool may justrepeat the problem once secure boot is re-enabled.
 Dell lists that they have tested XPS 8700 with this update and have not indicated problems no mention of secure boot issue.

Read other answers
RELEVANCY SCORE 62

Hello everyone
I am trying to make Windows 10 scripted installation with UEFI boot.
Every things works with normal Legacy mode in our environment and k2000.
I have made WINPE 10 boot file as a normal procedure with k2000 Media Manager (like in legacy mode). And uploaded it to k2000. Of cause I have re-cached my drivers when making new a boot source. 
I have setup our new DHCP so it can boot with UEFI and it works!, and I can see my boot sources when boot up the client in UEFI mode. 
Here comes the tricky part I can choose my newly created Windows 10 boot source with Dell's own WINPE10 drivers. Then it loads the Boot source file that I created but It stop at the Windows 10 logo it never loads the deployment menu like in legacy mode, so I cannot deploy a scripted installation.
I am stuck what could be wrong or what have I missed ? Please help
Regards,
Michael

     

Read other answers
RELEVANCY SCORE 62

Dear Friends,

Long time reader of this forum but a first time poster, so please forgive me if this question has already been asked and answered.

Laptop: ASUS UX31A-DB71, latest BIOS: 218

Originally my laptop came with Windows 7 and when i looked at disk management my disks were formatted with UEFI schema. One of my friend gave me a UEFI bootable USB drive loaded with Windows 8. So, i thought why not give it a try. So, I created a backup of my OEM Windows 7 and saved the iso files in a seperate external HD (created twice just to be sure . Now, i decided to load the Windows 8. Booted into the BIOS and there is an option to select the USB drive along with the UEFI option for that USB drive. I selected the UEFI option but some reason it does not boot into UEFI. So i decided to select the standard USB install and this option let me install windows 8. In the process of installing i formatted the partitions and made a single partition and installed Windows 8 on it. I am guessing now the drive is not GPT but MBR. I also noticed that his installation USB disk had an option to select either 32bit or 64bit of Windows 8...I find this kind of odd. Would Microsoft create a same iso file with both versions? I am guessing he created the USB from a illegitimate source.
I am planning on purchasing Windows 8 Pro version as an iso but wanted to be confident that it would work with UEFI architecture.

Questions:
1. Why would the system NOT boot from UEFI?
2. If I download the legitimate iso fr... Read more

A:UEFI USB Disk - Does not boot from UEFI Windows 8.

Welcome. Begin with Clean Install - Windows 8. See the UEFI links in the tutorial: How to Install Windows 8 Using "Unified Extensible Firmware Interface" (UEFI). You also will want to see this tutorial link: How to Do a Clean Install with Windows 8 Upgrade.

Read other 9 answers
RELEVANCY SCORE 56.8

I have a Genuine Microsoft DVD for Windows 10. When I put the Bios in UEFI boot mode It does not boot from the DVD or if i use a USB bootable stick formatted using APT format. When I hit esc on boot and select the boot devices to boot from nothing is shown.  If  I let it just try to boot it give me a message that no bootable image on hard disk. It is a new hard.  When I put it in legacy support mode it will boot either the USB or the internal DVD, but I want to use UEFI and the new APT format for security. What device can you buy so this laptop  will boot something that is portable media on this bios ? It came with this format on the original hard drive with windows 7. Thanks,Buford HP Pavilion DV4-5113cl with INSYDE F39 bios from latest update

Read other answers
RELEVANCY SCORE 56

I'm trying to install Windows 7 Home Premium on a UEFI system with a 3TB HDD and I am unable to get the partitions to format properly so I do not get an error in Windows preinstall environment saying the partitions are not in the recommended order. This is the third time I've scrapped the install and wiped the disk after I had everything incl all drivers and updates loaded and testing the system. Upon startup I noticed on the windows start up screen a steady white cursor in upper left of screen (DOS looking but not flashing) and it seemed to hang on that screen awhile so I knew something was not quite right and thought it had something with choosing to ignore the out of recommended order partition message I got in WinPE.

I'm using diskpart, starting with a clean disk, when I "convert gpt" it automatically creates a 128MB MSR partition (I believe this is the "protective MBR" for gpt disks but again when I'm in the windows preinstall environment it will say the partitions are not in the recommended order. Do I just ignore this message and continue to install the OS on the primary partition? Is this protective MBR causing the the steady white (DOS looking) cursor on the windows startup page?
Here are my commands in diskpart
C:\> Diskpart DISKPART> list disk DISKPART> select disk 0 DISKPART> clean DISKPART> convert gpt DISKPART> create partition efi size=100 DISKPART> assign letter=s DISKPART>format quick fs=FAT32 DISKPAR... Read more

A:3TB GPT disk NTFS-UEFI Partitions are not in the recommended order

Hi,

Was the disk already partitoned before you attempted to create the GPT? GPT disk can only be created on RAW (unpartitioned) disks.

Using GPT Drives

Hope this helps.

Regards,
Golden

Read other 8 answers
RELEVANCY SCORE 56

Hello, I have a Y720 tha comes with a 1x 129 GB M2 SSD and x1 HDD, in UEFI mode. I'm currently trying to replace the M2 SSD with a newly bougth Samsung 960 EVO M2 where I would like to install Windows 10 also in UEFI mode, as it has better power management than Legacy. But I have tried booting the Windows 10 installer USB stick and the laptop does not recognize in bios. I have created the usb stick with RUFUS 2.18 (latest), choosing UEFI + GPT and Fat32 file format. Before that I also tried restoring a system backup image I created from the former M2 using AOMEI Backupper but I couldn't boot the USB utility to do so either (the same happened: Bios does not recognise it, despite creating it choosing UEFI mode) Things I have tried: 1. Disabling secure boot (although the Secure Boot Status staed "Enabled", so I used the "REset Secure Boot mode" option too...)2. Chaging Optimal OS Setting to disabled in seetings, but still no use3. Using the Novo Button on the right part of the laptop. Of course, changing boot mode to Legacy would allow me to install Windows from USB ....but in Legacy mode, which I'm trying to avo So ...is there a way to boot a UEFI usb stick to install Windows in UEFI mode from it?  thanks!

Read other answers
RELEVANCY SCORE 56

What is UEFI Boot Source means and why some people disable this feature?

Regard,
Thanks.

Read other answers
RELEVANCY SCORE 56

**** This issue has been resolved ****
**** Look at Page 4, posts 4 and 5 ****
**** You need to enable Legacy MBR by Enabling Launch CSM in the EFI Setup ****

Hello all,

This is my first post. I am a Windows 7 user and now (against my will) Windows 8.

I bought an ASUS N76 laptop pre-loaded with Windows 8 so these are the new generation n76 series. The old ones come with Windows 7. Anyway...

I attempted to boot a Windows 7 ULT 64 install DVD but the install hangs on the Windows logo/flag. So...

- Windows is loading files is shown and hidden
- The animated Windows logo appears and then it just hangs....go figure

I have no idea what is going wrong. I went into the UEFI setup and the only option for my BR is EUFI boot.

I also added a "boot option" asking the EFI to boot "efi\microsoft\boot\boot.efi" or "\efi\microsoft\boot\boot.efi" but when selected (from Boot Override), the screen goes blank for a few seconds, the BR starts spinning and I am thrown back at the EFI so it looks like it cannot find the file. For path, I selected the BR device and at the end has a "\".

I have secure boot disabled. (yep, I have an option for that). So now I am left empty handed and I am stuck with Windows 8. I even put in a brand new SSD hoping I would install W7 on it but I can't even start the setup!! Argh....

I am very experienced with MBR and BIOS but I am a complete newbie to UEFI. I don't know what is going wrong and why the setup hangs....Ther... Read more

A:Asus N76 UEFI - W7 64 Install Hangs on Logo (DVD UEFI Boot)

Win8 PC's have Secure BIOS which must be disabled to install any other oS, then you can install in UEFI mode following these steps: Downgrade Windows 8 to Windows 7

If you want to bypass UEFI and install normally to an MBR drive the procedure is related here: MS new "Secure Boot" locked BIOS arrives

Other info on EFI:
Technical Note: UEFI BIOS vs. Legacy BIOS - YouTube
The 30-year-long Reign of BIOS is Over: Why UEFI W... - Input Output

Read other 9 answers
RELEVANCY SCORE 56

Trying to understand handshaking between UEFI & Win 7. Have Win7 Pro sp1 64 installed on SSD, mb=Asus F2A85-V Pro. Example: boot to flashdrive to do Acronis backup of SSD; remove SDD, insert spinner; boot again to flashdrive to do Acronis restore to spinner (to test backup); remove flashdrive, boot to UEFI, set UEFI spinner as default, save & reset; spinner starts boot (#1), Win logo shows briefly, reboots (#2) and shows Win repair/normal screen; choose normal; Windows desktop shows; new driver is loaded for spinner and asks for reboot (that part I understand); reboot (#3) starts and again briefly shows Win logo before yet again rebooting (#4) to the Win repair/normal screen; again choose normal & all is happy. But then I remove the spinner, insert the SSD, and have to go through the whole deal again. Why so many reboots?

Similarly, if I change any hd/flashdrive configuration, my UEFI boot selection is lost & I have to reset it again - sometimes with the multiple reboot scenerio, sometimes not. Sure wish I could force that the UEFI selection stay there as long as the selected drive is installed.

A:UEFI boot keeps changing; UEFI/Win7 handshaking confusion

Hello and welcome diana look I am having a little difficulty in following the train of the thread.

Now do you mean you just backed up the SSD to a USB stick ? then tried to transfer that USB stick back up to the spinner? If it was just a back up then I don't think it is going to work because it is only a backup.

To make the spinner the boot device I would be cloning the SSD to the spinner. I wouldn't mucking around with sticks as I cannot see why that is necessary.

Read other 6 answers
RELEVANCY SCORE 55.6

   Evidently while trying to take advantage of the Windows 10 Upgrade, somehow some damage was done to a file(s) from my old  Windows 8.1 OS pertaining to a missing, or damaged, file....  \windows\system32\boot\winload.exe  ...  which
in turn rewflects an Error code:  0xc0000001...
  At any rate, as a result, I am not able to boot up without an installation disc, nor perform the requested "Restart" to continue with the Windows 8.1 reinstallation because of this Error, and missing file(s), and am at my wits end...
  Please does anyone have any idea what my best course of action might be at this point, as I have seeminglly tried everything that I could think of for the better part of two weeks now.
  Last night a gal that lives a few doors down checked in on me, because she hadn't seen me for those two weeks and was just pretty concerned about whether I was allright or not, and she suggested that I take the laptop to an outside Technician, but
unfortunately, I am a disabled  U.S. Veteran, and I just don't have alot of money to work with.
  If someone could please help me with this litlle bit of a predicament, I would surely appreciate it more than you could ever know.
  Thank you....  And I Wish you Happy Holidays!
     -Otto Pedersen

Read other answers
RELEVANCY SCORE 55.6

Is there currently any way to configure a custom boot logo for UEFI booting? I can only find methods for Legacy users, but no luck with UEFI.

I'm kind of new to custom boot logos, so if anybody could give me some information as to if it's possible first?

Regards

Read other answers
RELEVANCY SCORE 55.6

Just curious, but is there option for me to enable uefi boot of my Windows 10 Professional installation on my HP xw6600 dual quad core E5450 machine which holds two Samsung 850 Pro SSD's, one for Windows 10 and the other completely for Ubuntu LTS 16.04.When possible,  how to go about it. How do I enable this option. Yours truly, 

Read other answers
RELEVANCY SCORE 55.6

Hallo,

After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.

I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.

I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.

Any suggestions on how to solve this?

Thanks for any useful tips,
Bavo

A:Deleted Uefi boot option (Windows Boot Manager) by mistake

The Windows Boot Manager is held in the Bios and restores itself if you boot to a UEFI capable device. Could you please explain exactly what you did to "Add" the USB boot option?

I haven't used Rufus since it is so easy to just format the drive yourself, but it did format in Fat32?

I have the PXE boot options disabled in my bios since I do not have a network boot option.

Read other 4 answers
RELEVANCY SCORE 55.2

Hello to the forum. Thanks for the welcome. And thanks for pointing me in this subforum.

I have a notebook toshiba satellite L850-1HU with UEFI

Default is win 8 os, recently upgraded to 8.1.

Now I need to win 7.

I have a professional license N sp1 x64 and then supports UEFI

Is possible to combine the systems in dual boot and both in UEFI mode?

I see from your guides that for installation the UEFI is necessary partition in a certain way.
What should I do if I want to leave intact the UEFI partition of win 8 (5 partition)? I just make only space for win7(1 partition) that will use the same 4 partition UEFI of win 8 or i make other 5 partition???
And which of the two systems will handle the boot? I can decide I?

and the warranty? restores factory work?

If I change hdd, and install win 7, when I put the old hdd, it works as before removing it?

Sorry for the confusion! I hope you manage to understand me and help!

Ciao forum! E grazie! Saluti dall'Italia!

A:Satellite L850 & Win 8 UEFi: How dual boot UEFI win 7 ?

If I change hdd, and install win 7, when I put the old hdd, it works as before removing it?



Yes. This is how I do any OS tests\'dual boot'\experiments etc with zero chance of damage to the original boot OS\hd. Am keeping a bunch of old HD's for the purpose. The downside is the slight risk for some mechanic\connection problems, just be careful, remember to power down! So if you don't find it troublesome to switch HD's, IMO go ahead and try that route.

Read other 10 answers
RELEVANCY SCORE 55.2

Hi all,

Currently having a wake on lan issue with a certain computer.

The machine is setup correctly but the windows boot information is stored in a 100mb UEFI partition, and when the computer wakes on lan, it will not boot windows, just sit at a blank screen.

When it wakes on lan it is trying to boot from the legacy device (same blank screen happens if you choose to boot from it from bios)

ive tried updating the bios but no luck, all settings seem to be as they should be.

Is there some trick to get it to load the UEFI MBR, or is there a safe way other then reformatting the machine to move the MBR over to the legacy device itself?


Thanks for any help.

A:Boot UEFI from wake on lan, or convert UEFI MBR to legacy.

Back up your files, unplug all other HD's and peripherals,

Boot into BIOS setup to enable Legacy BIOS. Next check BIOS Boot order for an EFI Boot Disk: remove it, set DVD drive first to boot, HD second. Then set SATA controller to AHCI. Save changes and Exit.

Then boot into installer DVD or flash stick burned or written using tool and latest ISO for your licensed here.

At first installer screen Press Shift + F10 to open a Command Box, type:

DISKPART
LIST DISK
SEL DIS 0 (after confirming Windows 7 target HD #)
CLEAN
CONVERT MBR
CREATE PARTITION PRIMARY SIZE=102400 (for 100gb partition, adjust as desired)
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

Read other 1 answers
RELEVANCY SCORE 55.2

I have a new Precision 7710 with a 2.5 inch 1GB SATA SSD (system boot=Disk0) and a 1GB NVMe PM951 SSD.
I have been attempting to install Windows Server 2012R2 on the second, M.2 SSD (Disk1) into a GPT, NTFS partition.
Since this system has no DVD, I made a bootable UEFI thumb drive with the contents of the .iso installation for Server 2012R2.
The thumb drive boots OK and I can begin installation, but when it comes to choosing the target for installation, the M.2 SSD is not visible in setup.
The M.2 drive is clearly visible inside Windows 10 Pro as the D: drive.
So...I mounted the .iso setup file in Windows 10 and ran setup.exe. The install began and could see the target M.2 drive, and began loading files on the second SSD. It then attempted the first of several restarts that come with this process with the new Server 2012 R2 environment.
It sucessfully modified the Windows Boot Manager before the restart, then restarted, and the setup program gave an error because it could not find the target partition on the second SSD.
The setup environment then modified the Boot Manager to "Windows Setup Rollback" and proceeded to enter an infinite loop, attempting to delete files from the unreachable M.2 drive. I manually choose Windows 10 on the boot menu, and once booted changed Windows 10 back to the default OS.
I've tried several things (turning off Secure boot, changing from UEFI to legacy bios--it won't boot at all that way) , but I can't get that second disk t... Read more

A:Precision 7710 UEFI Bios and pre-boot does not detect second SSD (NVMe PM951) can't install Windows on it for dual boot

You're going to need to build a new set of boot media with NVMe drivers.
www.nvmexpress.org/.../

Read other 1 answers
RELEVANCY SCORE 54.8

Hi there,Recently got a HP Pavilion g6 2213sa which came with Windows 8 (spit!) and this disgusting UEFI BIOS replacement (double spit!).Anyway, I need to dual boot Ubuntu on my system, so I installed Ubuntu. Normally, on a non UEFI system, a "Grub" bootloader installed by Linux would take over the startup process, and allow you to choose between either Windows 8 or Ubuntu on startup. However, on this computer, startup is just booting straight to Windows 8 despite the fact that Ubuntu and Grub IS installed.Now, upon startup, if I press F9, then I get to change the boot-device on a one-time basis. I can either select "OS Boot Manager", which loads Windows 8, or "Ubuntu" which loads the Grub bootloader which allows me to select Windows 8 or Ubuntu.However, when I press F10 to enter the Bios Setup with the intention of changing the boot order permanently, the Ubuntu option isn't there. Instead it has OS Manager, USB Disk, CD Rom, USB CD Rom and Network Card.Thanks, HP for, the crappily designed BIOS.Anyway, can anyone PLEASE provide me a way of changing the boot order so that GRUB is loaded first and NOT this crap Windows 8 rubbish (that I would happily bin if I didn't need it for work). 

A:Changing Boot Order on Dual Boot Windows 8 and Ubuntu

Looks like HP forums are just as useful as HP customer service and HP computers - i.e., not very useful at all.Problem solved though. Took the piece of crap back for a full refund and won't be buying HP again.Happy days.Bye.

Read other 9 answers
RELEVANCY SCORE 54.4

My Dell Inspiron 660 is 2 months old. It came with Windows 8 preinstalled. My problem: I am trying to change the boot order so I can boot from CD ROM as a first option. I have tried using the "F" keys on boot, but it just ignores me and goes on to boot up. I have also tried the "Advanced Options > UEFI Firmware Settings" in "Change PC Settings" and got the same results. I spent some time on the phone with a Dell tech. After trying all the things I had already tried, he and his supervisor decided I must have a bad Motherboard. Does this sound right? Is there any way to repair this problem?

A:Can't get into Windows Boot Manager to change boot order.

The option your looking for is located in the BIOS. Try using the Del key to access the BIOS setup screen on startup.

Read other 33 answers
RELEVANCY SCORE 54.4

Hello,

I recently purchased a copy of x64 Windows 7 Business. I downloaded it from the Online store DigitalRiver as part of the students deal.

Here is my system information:
Current operating system: Windows Vista x32 Business
Processor: Intel Quad Core 2 Q6600 2.4 GHz
Memory: 4GB PC5400 DDR2 667MHz
Motherboard: Intel 975XBX2 KR Socket 775
BIOS version: 2838 (Latest)

I burned the x64 Windows 7 installation files onto a DVD. I am aware that it is not going to run from my current OS since it is x32.

My Boot order is the following: DVD/CD ROM -> HDD

I tried to boot with the x64 Windows 7 DVD but it simply didn't. So I decided to format my computer using the x32 Vista DVD.

After the format, I tried to boot with the x64 Windows 7 DVD and it failed again.

So I re-installed x32 Vista and I still cannot boot with the x64 Windows 7 DVD.

Any help will be much appreciated.

A:Windows 7 x64 dvd doesn't boot up -Not boot order issue

Make bootable iso from student d/l

Read other 3 answers
RELEVANCY SCORE 54.4

I am in the process of doing a number of clean installs. I am trying to make a decision as to whether or not to utilize the UEFI and Secure Boot modes which are available on the MBs.

It seems from an initial attempt, that I cannot simply use UEFI/GPT without turning on Secure Boot...that is one must NOT use CSM (turn it off) and USE Secure Boot. You cannot use UEFI without Secure Boot.

Is this correct? I am considering us9ng UEFI without Secure Boot because I hear it is faster.

However, I am concerned that I will run into all sorts of trouble turning Secure Boot on with respect to double booting Win 10...and additionally with creating images with Acronis.

I have been in the habit of creating a new PC with an extra drive with a cloned OS...then disconnecting the drive so that if the first OS drive fails, the person can boot up quickly with the other drive. I am concerned that there will be a problem with Secure Boot.

I mean, how many times have I been infected with a root kit.....some virus that take over at boot time...Answer...never since I started with PCs in 1991!

So, anyone really think Secure Boot is worth it?

A:UEFI/Secure Boot or not to UEFI/SB, that is the question..

Originally Posted by Andrew124C41


I am considering using UEFI without Secure Boot because I hear it is faster.



Secure Boot does not affect the speed of your computer.







Originally Posted by Andrew124C41


However, I am concerned that I will run into all sorts of trouble turning Secure Boot on with respect to double booting Win 10...and additionally with creating images with Acronis.



Windows 8/8.1/10 are compatible with the Secure Boot.

I don't know about Acronis True Image but Macrium Reflect is compatible with the Secure Boot.







Originally Posted by Andrew124C41


So, anyone really think Secure Boot is worth it?



It is a very important security feature.






Microsoft designed Secure Boot to protect the computer from low-level exploits and rootkits and bootloaders. A security process shared between the operating system and Unified Extensible Firmware Interface (UEFI, replacing the BIOS), Secure Boot requires all the applications that are running during the booting process to be pre-signed with valid digital certificates. This way, the system knows all the files being loaded before Windows 8 loads and gets to the login screen have not been tampered with.

If a bootloader has infected your computer and it tries to load during the boot-up sequence, Secure Boot will be able to undo all the changes and thwart the ... Read more

Read other 3 answers
RELEVANCY SCORE 53.6

Hi guys. Not sure if this is the right place for this, but here goes.

I have Kubuntu 13.10 and Windows 8.1 installed on separate drives on my computer. Dual-booting through the Linux bootloader works fine, as in I can boot either Win8.1 or Linux without incident. However, whenever I boot Windows, it resets itself to the highest boot priority, and always re-adds a boot entry if I remove it. My question is, how can I get it to stop doing this? I can temporarily fix it through Linux, but I'd really like to stop it permanently, as it's starting to become a pain.

EDIT: It turns out my problem was related to a duplicate entry for Ubuntu. If you're having this problem and have tried to install Linux a couple of times, check to make sure that you only have one entry for it.

A:Windows 8.1 resets boot order on boot

Just make sure that in your BIOS, the first boot device is the UEFI device, was KuBuntU overwriting that in the dupe entry? Or was Windows doing it?

Since the removal of the Boot.ini file, I have had trouble keeping it all straight. Always in the past I could use the Boot.ini file to set my Boot OSes, but now you have to use BCDedit.

There are some 3rd party apps that allow you to set it to what you want, but they are paid programs. Check the Tutorials section for ways to set your Preferred Boot. One thing I have found is that if you have Windows 7 installed on one drive, and you add another drive and install Windows 8 on it fresh, it puts the Boot Entries on the Windows 7 drive. That's how my Media computer ended up, the Windows 8 OS is on a 750 GB drive, but the boot loader for 8 is on a 250 GB IDE drive that has Win 7 on it. So if the IDE drive is removed, it won't boot.

This does not happen if you install the OSes while no other drives are added, the boot sectors will be on the drives holding the OS. I took out all other drives from my main computer and then upgraded to Windows 8 from 7, after I put the other drivers back in, I got the old Black Boot Loader screen, so when I choose 8, it reboots, shows me the Windows 8 Loader, then continues.

Finally, I set the Windows 8 loader to Legacy mode - The Tutorials show you how, just search for "Legacy Boot Mode" - This might be good for your system, also you can get to Safe Mode a lot easier as well as choose betw... Read more

Read other 1 answers
RELEVANCY SCORE 52.8

I have very little experience with Windows 8 until now. I am having an issue trying to run System Refresh or System Restore from the System Recovery Environment booted from the Windows disc. When I try to run it from the disc I already System Refresh says that the drive is locked. I tried System Restore and it said no OS's were found. I went into the CMD prompt and went to c: and can see the drive just fine.

Steps tried:
running fixboot, fixmbr, rebuildbcd commands from CMDrunning dskchk /f (which forced a dismount)

I then read something about a non UEFI bootable disk couldn't access a GPT partition, which I think is the case here. So then I tried oscdimg to make my iso UEFI bootable (twice) and the UEFI Boot Manager still only shows 'Windows Boot Manager' at the boot menu. I even tried downloading an iso that was already UEFI incase I did it wrong and it still doesn't see it.

Not sure what I'm doing wrong here??

A:Trying to Understand UEFI and how to boot from Windows DVD

When you go to your BIOS boot options the DVD drive should be listed twice, once with UEFI in front of it and one entry with no UEFI in the description. Selecting the entry with UEFI in the description will boot from the DVD in UEFI mode. If the PC doesn't have UEFI or UEFI is disabled you won't see UEFI mentioned in the boot menu.

The screen shot in step 4 here, UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with will show what I mean.

Read other 10 answers
RELEVANCY SCORE 52.8

Hey all,

I just got a new HP ENVY dv7t-7200 CTO Quad that came pre-loaded with Windows 8. I wanted to install Windows 7 so I enabled "Legacy Support" in the BIOS which disabled UEFI mode. Everything went fine from there. I ultimately decided to go back to Windows 8.
I found this guide but could not get my Windows 8 installation that I have on disc to load on startup: UEFI (Unified Extensible Firmware Interface) - Install Windows 8 with
I disabled "Legacy Support" in the BIOS so now UEFI mode is re-activated.
My UEFI Boot Order in the BIOS is:
CD/DVD Rom
USB Drive
OS Boot Manager

But when I have the disc in and restart windows, it does not read the Windows 8 installation from the disc. If I press F9 to change the Boot Order it only shows:
OS Boot Manager
Boot from EFI File

It should be noted that the it will recognize the disc if I'm not booting in UEFI mode.

I could install Windows 8 again without UEFI but I would really prefer it. Any suggestions?

A:UEFI cannot boot from USB or DVD to install Windows 8

Solved -I went to System Recovery while starting up by hitting F11, then used the option to restore the comp back to factory settings. It installed Windows 8 in UEFI Mode

Read other 2 answers
RELEVANCY SCORE 52.8

Hello!

I have my laptop since last december (less than a year), and for unknown reasons, I got a BSOD a few weeks ago and none of the available recovery tools managed to bring me back to my desktop; not even a refresh. That's when I promised myself that I would never ever again install a Microsoft OS, and went for Ubuntu 16.04 (which was already there on another partition). Now I'm realizing that I need some softwares that work best on Windows and not through a VM (eventhough I already have Windows 10 running in VM for Microsoft Office).

So here's my issue:

I created my bootable Windows 10 installation USB but I can't boot from it! I doesn't even show as an option. Ubuntu does. I tried a USB 3.0, 2.0, UEFI, Legacy, MBR, GPT... Nothing seems to work. Searched forums for hours and couldn't find a solution.

Now for grub to be able to launch at startup, I had to add an efi file to the trusted uefi file list in the BIOS. I was wondering if such a file should be added to be able to boot from my USB... (secure boot is disabled).

I want to keep my Ubuntu and Kali...

I've attached a screenshot of my ssd partitions.

Any idea?

Read other answers
RELEVANCY SCORE 52.8

The problem is a freeze during Windows 7 64 bit installation loading disk.sys when booting in UEFI mode.

According to Intel online support (https://communities.intel.com/message/206067) :
+"Windows 7 Setup has a problem detecting Toshiba SSD"+

*Disk Drive ATA TOSHIBA THNSNH25 SCSI Disk Device (238 GB)*

Is there anything to do that would make Windows 7 setup loader work with the SSD drive ?

A:Windows 7 freeze after UEFI boot because of SSD

I read the discussion on the Intel community page.
It looks like you already tried all possible solutions to install Win 7.
It looks like Win 8 can be installed properly but only Win 7 isn?t possible.
Not quite sure why this isn?t possible but in case its SSD drive issue, you should try another SSD drive.
Maybe its a compatibility problem between the controller and SSD drive.

Read other 1 answers