Over 1 million tech questions and answers.

Disk Check Message

Q: Disk Check Message

Hello i have a problem similar to this http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Disk-Check-Issue/td-p/5466973. In summary i always get a message: To turn off Disk Check, press any key in x number of seconds.I dont press anything and the count down stops, check disk doesnt run and the system boots ok. If i use chkdsk /f c: to scedule a full scan during boot, the same things happen. No full check of disks. I have tried several things. A. After installing Creators update, did a reset of the pc (delete all files and apps and reinstall )B. Performed checkdisk in all drives within windowsC. Checked for dirty bits, with fsutil, and even hex editor on all drivesD. Used chkntfs /x c: d , to stop checkingE. Tried the solution on the link above, and tried to fix startup problems. Nothing has worked so far. Message is there all the time, check disk doesnt run, but i just have the countdown! Any other solutions?

Read other answers
Preferred Solution: Disk Check Message

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


Hello i have a problem similar to this  http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Disk-Check-Issue/td-p/5466973. In summary i always get a message: To turn off Disk Check, press any key in x number of seconds.I dont press anything and the count down stops, check disk doesnt run and the system boots ok. If i use chkdsk /f  c:   to scedule a full scan during boot, the same things happen. No full check of disks. I have tried several things. A. After installing Creators update, did a reset of the pc (delete all files and apps and reinstall )B. Performed checkdisk in all drives within windowsC. Checked for dirty bits, with fsutil, and even hex editor on all drivesD. Used chkntfs /x c: d , to stop checkingE. Tried the solution on the link above, and tried to fix startup problems. Nothing has worked so far. Message is there all the time, check disk doesnt run, but i just have the countdown!  Any other solutions? 

Read other answers

Hi,My name is Tim;
I am new to Dell Laptop and system. I bought my laptop on Monday 6-26-17; I love it. I had a Dell Tech fix the Help & Support app. All is good, but I have question; what does it mean when my laptop does a check disk and repair automatically?
I know this may seem like a dumb question, but I want to learn more about my laptop.

Thank You

Read other answers

Hello again. In my original thread: http://www.techsupportforum.com/forums/f10/no-disk-message-564181.html#post3210410 I was referred here to check on my PC's security by following the basic procedure. As I've done it before, I ran a RSIT instead of a DDS.

Summary: When I first look at the computer in the day, there's a skinny Windows message with the blue on top saying that "There is No Disk in the Drive.", then three buttons under it saying "Try Again", "Cancel" and "Continue, and then to the right of those, a big red circle with a big white X. This was after the computer was just sitting on all night, not attached to the Web or anyone using it. And a few months before that, it used to be McAfee giving a Window to "Archive Data" onto disks. The disk drive seems to be fine and there's no file name or anything mentioned in the message, so it seems odd.

RSIT Log text: Logfile of random's system information tool 1.07 (written by random/random)
Run by Dashel R at 2011-04-10 18:11:45
Microsoft Windows XP Home Edition Service Pack 3
System drive C: has 14 GB (19%) free of 73 GB
Total RAM: 510 MB (32% free)

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 6:11:47 PM, on 4/10/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\WIN... Read more

A:Windows XP, No Disk Message: Security Check

Hello and Welcome to TSF.

Please Subscribe to this Thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant notification by email, then click Add Subscription.

Please note that the forum is very busy and if I don't hear from you within three days this thread will be closed.


We want all our members to perform the steps outlined here:

NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help - Tech Support Forum

After running through all the steps, you shall have a proper set of logs. Please post the logs in your next reply for my review. It's the only way I can give you sound advice.

If you have trouble with one of the steps, simply move on to the next one, and make note of it in your reply.

Read other 19 answers

Sup ppl?

I've been trying to get chech disk to run on startup for about a month now with now succes. I've searched the net constantly and tried tons of different approaches, but they all failed for me.

Anyway, I keep getting a baloon popup saying I should run chech disk because I have errors. I was hoping there's any type of software I can buy/download that will do the same thing as Check Disk, as in fix errors and bad sectors on disk.

Thanks in advance ppl.


A:Check Disk \ Auto Check Alternatives

There isn't any such software??


Read other 3 answers

Hi, I've tried a lot of things but nothing is working, I would greatly appreciate any help. About two months ago a blue screen would come up and then shut my computer down, which I've been able to work around. Now, not sure if it's connected, but it's not reading my cd drive (won't eject or read it in my burner), disk defragmenter says "Disk Defragmenter could not start", and check disk says "Windows was unable to complete the disk check." I've tried some things I've found on the web including running check disk from cmd which ran but didn't change anything; the volume came back not dirty, and I checked the logical manager and all in the services section. Thank you for your time.

Read other answers


So I recently installed Windows 7 Home Premium on an Acer Aspire 5349. I've been having a bunch of issues with it since the install.

Firstly, When I boot, it takes me to the "Disk Check" screen and tells me that one of my disks needs to be checked for consistency. However, the disk in question isn't something like "C:" or "D:" it's "\\?\volume{c4afec15-cb60-11e4-9583-806e6f6e6963}". The disk check also automatically cancels. It doesn't prompt me with the usual " Press any button to stop the disk check" option, just straight to " Disk check has been cancelled"

When I eventually get to the desktop, I get the screen " Windows detected a hard disk problem ". I look at the details and I'm told that my C:\ drive has been reporting failures. When I check the status of the disk via the Disk Management tool I'm told that all my partitions are healthy.

When I actually use the laptop, it's very slow and frequently freezes. It takes a while to catch back up and sometimes these freezes lead to a BSOD. The BSOD message was KERNEL_DATA_INPAGE_ERROR. I checked the event viewer and it also seemed that before certain crashes I would have driver controller error on an IDE Port. I've attached a picture of the disk check screen, event viewer, and memory dump. I apologize about the quality of the pictures, I couldn't screenshot the images on the actual laptop as it was freezing and crashing too often.

I ... Read more

A:Frequent Freezes, BSOD, Disk Check auto cancels, and Hard Disk Errors

DISK_HARDWARE_ERROR: There was error with disk hardware
Ensure all data is backed up, then run the DOS version of the LONG test of SeaTools, and report the result:
SeaTools for DOS and Windows - How to Use

Read other 3 answers

As of late my PC has been going very slow, stuttering, freezing for a minute occasionally, and sometimes when I restart I get a disk read error that requires me to turn the PC off and on again. I ran check disk using command prompt, it got to 12% before it said it had found corrupt files, now it gets up to 37% verification before it finds corrupt files but cannot repair them.

I tried running system repair from the windows 7 disk, but it fails. I've used western digital to run tests on my hard drive, but there were no problems found.

dont know how to fix this now, i've been told its probably the hard drive failing but the scan says otherwise. I can really tell how it takes a lot longer to boot up, log in, even open internet browser takes a lot longer than before.

help appreciated

A:Check disk failing, disk read errors, blue screen, computer going slow

Are you running the Western Digital Data Lifeguard CD ISO (extract first) burned to CD using WIndows Image burner, then booted to run the Extended Scan? This should give you a definitive diagnosis of the HD, which appears from the Disk CHeck to be failing.

If the HD checks out I would do is try a perfect test Clean Reinstall to the same or another HD to know for sure.

Read other 9 answers

Hi everyone.

Going crazy with this. So about 2 weeks ago, my "intel rapid storage technology" software gave me an error. I opened it and saw that one of the disks (2 disk array) in my Raid 0 array, had an error. I reset it back to normal and left it. Then I started to get pop ups saying that files were corrupt over the course of the next few days. My OS still worked and everything worked as usual, except my sound card. I have no more sound from anything plugged into the jacks, only USB connected audio works.

So, I attempted to run a check disk to fix said errors, but I get a message that the drive is not accessible due to a recent software package install "error 766f6c756d652e63 3f1". I went into my system restore and all restore points are gone, except one. When I click on it, it says the drive is not accessible.

Today, I installed 2 new 1TB hybrid drives in another Raid 0 volume (yes I know...but that's what I am using for now). When I went to write the system image, it said the disk had errors and to run a check disk first......which I can not.. I clicked ignore and let it go and write the system image with the errors. When it is done, do you think that I will be able to run a check disk on the new drives (2nd array, since it will not be inaccessible) to repair the errors that it wrote from the bad disk?

I am not sure where to go from here. My PC is still up and running and almost finished copying the image to the two new drives. My hopes are th... Read more

Read other answers

Computer -> Right Click Hard Drive -> Click Properties -> Click Tools.

From there I get the Disk Check option. However After opening the file it does not run. No matter what is or is not checked the file will not run.

The program instantly closes out. Even when I try to set it so that it will run on the next start up. The file will close out without showing the confirmation box.

Now, when I do restart I go to my log in page, but not until after seeing a page for a brief moment, it looks like the page you see after completeing a disk check at start up.

Used the windows install DVD to check for errors in windows and to see if anything needed repairing, came back as everything was fine.

Any help is appreciated.

A:[SOLVED] Scan Disk / Disk Check File Not Operating

Hello Ferdoc

Try running it with the /r (repair) switch

Start and then start typing "command prompt" until the shortcut shows up in the search list (at top). Then right click on it and choose "Run as Administrator". Choose to confirm or type in your password to elevate the process

When the command prompt opens, type in
chkdsk /r (there is a space before /)



Read other 7 answers

Hello Tech Support Guy, I was thinking to make my computer faster and lose some space, so i went ahead and did a Error-checking and got the Vista Permission thing and continued and i checked Automatic fix file system errors and scan for and attempt recovery of bad sectors then pressed start and nothing happen , i ran Check Disk with admin cmd and works. I rebooted my computer to see if chkdsk works and its not theen tried to do the error-checking and still doesnt work. Then when i tried to use my Disk Defragmenter , i waited till the analysis finished then i got the thing that said your file performance can be improved, defrag now. And i clicked which disk i want to defrag and press ok , nothing happened and juss went back to analysis then your file performance can be improved, defrag now. btw i tried to use Defraggler and ran as a admin when i click analyze, nothing happens and i looked at the status and says Analysis failed, i even tried juss going defrag and the status said building file list failed.
PLEASE HELP ME GUYS! iv been stressing cuhs of my computer

A:Windows Vista Check Disk & Disk Defragmenter

Read other 16 answers

Hello Vista Forums, I was thinking to make my computer faster and lose some space, so i went ahead and did a Error-checking and got the Vista Permission thing and continued and i checked Automatic fix file system errors and scan for and attempt recovery of bad sectors then pressed start and nothing happen , i ran Check Disk with admin cmd and works. I rebooted my computer to see if chkdsk works and its not theen tried to do the error-checking and still doesnt work. Then when i tried to use my Disk Defragmenter , i waited till the analysis finished then i got the thing that said your file performance can be improved, defrag now. And i clicked which disk i want to defrag and press ok , nothing happened and juss went back to analysis then your file performance can be improved, defrag now. btw i tried to use Defraggler and ran as a admin when i click analyze, nothing happens and i looked at the status and says Analysis failed, i even tried juss going defrag and the status said building file list failed.
PLEASE HELP ME GUYS! iv been stressing cuhs of my computer

i have trend micro internet security and i got blue screen when i got on my desktop

A:Windows Vista Check Disk & Disk Defragmenter

Click the link in my signature and under step 4 download the zip file and extract the shortcuts.

When you click them they open a cmd window, dont close that window. Be patient that window will dissapear by itself. These advanced shortcuts are the best free defraggers there are. To get better you would need to buy something like PerfectDisk, so dont bother with defraggler etc...

EDIT: forgot to say to get checkdisk to work, click on the vista start orb and type regedit in the search field and hit enter. Next navigate to this key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Man

On the right hand pane you should see BootExecute right click on it and select Modify then past this in:

autocheck autochk /r \??\C:
autocheck autochk *

Then click on OK and exit regedit. Then restart your pc.

Read other 11 answers

Hey guys.

My disk defrag and Check disk are not working.

I can bring up both programs, but when I attempt to either Analyze, Defrag, or Start Scan, respectively, a error pops up, saying "Windows was unable to complete the disk check" and "Disk Defragmenter does not start"

I don't believe it is virus-related as I have ran the Malwarebytes program and nothing has come up. I also ran Trend Micro and nothing has popped up either.

I also wonder if it has anything do with my MP3 issue.

I doubt it, but if anyone can help me out with either situation, I'd appreciate it.

Thanks in advance, folks.

A:Solved: Disk Defrag and Check disk don't work

Read other 9 answers

Hey Guys,
I've been pulling my hair out trying to figure out what my problem is. Basically, we had an issue with the computer and so we force restarted it at one point about a month ago. After that, we started getting requests to run a check disk after every time the computer was rebooted. The check disks take 20+ hours for some reason on this computer, and we cannot afford to have it down that long since it is a work computer. We cancelled the disk check and afterwards we noticed that the hard drive was filling itself up. The computer has a 450gb hard drive and after a couple of hours it was telling us that there were only 2mb of space left (we have maybe 20gb of data on the computer total). This is the point in which I stepped in and ran a disk cleanup and deleted all of the old system restore points. It gave us about a gb of space so I left it alone (I didn't realize at this point what the problem was, just thought it was too much stuff on the comp). The next day the computer's user told me it was the same problem and I knew that she wasn't using all of the space that I had found so I checked it out again. Once again, it was giving me the low disk space error. I decided to download and install Windirstat to see what was taking up all the space. When I run Windirstat, it tells me that 430gb of the 450gb of space is "Unknown". After that, I shut it down and let it run the check disk completely over the course of a weekend. It ran for about a week after... Read more

A:Windows 7 No Disk Space after Disk Check Cancellation

Likely the file system was messed up by the forced restart, a rare but possible occurence.

So the unknown used space may be failed attempts to copy data over to repair the file system. This is why it's always advised to back up data before doing a Disk Check and of course data should always be backed up anyway against HD failure - which itself cannot be ruled out here.

I would test the HD with the maker's HD Diagnostic extended CD scan, followed by a Disk Check done from the Win7 disk or Repair CD's System Recovery Options Command Line which doesn't depend upon the OS on a potentially scrambled file system.

Read other 1 answers

HI, i have a Transcend StoreJet 25M 640GB external hardisk, at first it was working properly until a time that it wont open.
at first it will ask me to format the disk to be able to open it or sometimes it will say ? NOT accessible : the parameter is incorrect?
i did some searching and i learned that i need to chkdsk it, and when I did using command prompt it says ? Data error (cyclic redundancy check)?
if a click properties on external hardisk , it has zero bytes free and used space, and if click the ?check now? in tool tab under error checking it says ? The disk check could not be performed because windows cannot access the disk..
is there anything i can do the fix these ?? and be able to operate my external hard disk again? please help me , I would really appreciate.. thank you (forgive my grammar)

A:Disk check could not be performed because windows cannot access disk

Try the Recovery tool from here:

Read other 2 answers

Hoping someone can help, I keep getting the above Windows no disk error and sometimes my computer reboots itself.

I have ran CC shredder, AVG spyware, rootkit, spyware, and hijack this.

Read other answers

im running on winxp

so what i did was scan for and attempt of bad sectors, when it was done i restarted the computer, then a blue screen pop up reading and checking for errors the last time i check it was on 33%

so i was just sitting watching tv and all of the sudden my power for the whole house went out for about couple of min then when i turn on the computer, i tells me if i want to reboot in safe mode or normal, so i pick normal(tried safe mode also same thing happened) when it start loading a blue screen pop up saying

A problem has been detected and windows has been shut down to prevent damage to your computer

if this is the first time you've seen this stop error screen, restart your computer. If this screen apperas again follow these steps

Disable or uninstall ant anti-virus, disck defragmentation or back up utilities. Check your hard drive fongiuration, and check for any updated drives. Run CHKDSK /F to check for hard drive corruption, and then restart your computer

Technical information
*** stop: 0x00000024, 0x00190203, 0x8676D250, 0xc0000102, 0x00000000

i have no restore disk nor a winxp is there anyway to fix this, am i screwed

A:check disk local disk problem +more

Read other 6 answers

I keep receiving a message stating there is a serious hard disk error problem and should fix before using any more. Relates to disk MK3265GSXN

How serious is such a message and what are my options given my Toshiba Note is now almost 7 years old? Is this message and disk issue common?

Thanks for help,


Read other answers


Last night my hard disk screamed really loudly and has now died. I get the NO IDE DISK message.
I obviously need to replace the hard disk.
Can anyone please tell me how and where to buy one. At least 80 Meg or more. Cannot find anything on the Toshiba web site about spare parts.

I live in Spain so will need to get it shipped to me.

Also does anyone know if someone can examine the old hard disk and try and rescue my data. A lot was not backed up. Such as photos and kids singing.



A:Qosmio E10: Hard Disk died - NO IDE DISK message


Try to connect HDD to other PC as external one. Maybe you will be able to rescue some data. Other way you can try to check HDD using sector repair tool. One of them is HDD regenerator.

Maybe after doing this you will be able to start OS again. I have had similar problem. HDD Regenerator will not repair HDD but it can be used again.

In my opinion you don?t need any special HDD and I also think that you should be able to use 100GB one. You can order it by service partner in your country or take old one in pc store and talk with your local dealer. He will advice you what to do.

Read other 2 answers

I am using XP and I get the following message on booting up :-

"....:qttask.exe - No Disk
There is no disk in the drive. please insert a disk into drive\Device\Harddisk1\DR1 "

When I click Continue a number of times the message disappears and I can use the computer.

I don't know what the problem is and its effect. I would certainly like to cure the problem and would be grateful of any help.


A:Error message - Hard Disk qttask.exe No Disk

Best to stop it starting up with XP. Go Start>Run and type in msconfig. Click on the Startup tab and scroll down to the entry for qttask.exe and then untick it. Click Apply and OK and the system will restart. When it comes back, tick the "don't show this message again" box and hit OK. You won't be deleting QuickTime and can still start it when needed.

Read other 3 answers

Error: "There is no disk in the drive. Please insert a disk into drive \Device\Harddisk4\DR5"

The situation is this. I have an old program that came entirely on CDs. You can load the program on your hard drive, but it's constantly asking you to insert CD's to read portions of the program. I had a computer that I got it to work on, by loading the program on the Hard drive, and then fooled it into reading a flash drive that has all the content of the extra 7 disks.

I just got a new computer, and that solution is not working. The software won't recognize the flash drive no matter which USB slot I put it in. The software is no longer supported. It runs, but only if I insert the CDs. No matter where I put the
disk, it's not recognized, even if I change the drive letter to what the initial installation came from.

I know it's an odd question, but it's driving me nuts.


A:Error Message: There is no disk in the drive. Please insert a disk in

There is a utility from Microsoft that allows you to mount iso's as virtual dc roms, dvd, roms ect. it can be downloaded from Virtual CD-Rom. If you need to create iso's from the disks themselves try ImgBurn just be sure to uncheck any added software it wants to install including conduit.

Read other 9 answers

Hi, I get a notification every 10 minutes or so saying "Low Disk Space - You are running out of disk space on backup disk"
In the backup settings, I told it to delete files whenever it needs space, yet I'm still getting this annoying message.
A) Is my backup running as it should be?
B) How can I get rid of the annoying message?

A:Low disk space message for Backup disk.

Hello MPAII,

You will need to give us a lot more information. What backup software are you using? Is the Backup disk external or internal? What space do you have on it and what are you backing up? System image or selected data files?

Read other 1 answers

My ex gfs laptop is on the frits. Blue screen of death, and now she is unable to boot. It seems to freeze at the point right before the log in screen, just with a black screen.
She lives in a remote location, and I'm not sure she has access to any blank cds to make a boot disk, or a windows disk.
I've had her laptop fixed to the point of working before by running a disk check /f, then a defragment and virus scan. But it's old and she seems to make it crap out.

What are her options? She's unable to boot to safe mode, or safemode with command prompt.. I told her to leave it be for now as she's had a bsod before from the laptop overheating.

Thanks in advance for any help.

A:Disk check without boot disk?

Tried the recommondation about resetting bios in this thread
to no avail.

No discs are available but she does have a 2gb usb drive. Is it possible to do a boot from there?

Read other 1 answers

When I go to do a disk check it says that local disk is still in use! PLZ HELP!!!

A:When I go to do a disk check it says that local disk is still in use!

Quote: Originally Posted by Jaffle

When I go to do a disk check it says that local disk is still in use! PLZ HELP!!!

I'm guessing your trying to complete a chkdsk ?.

If so, You can not do it whilst windows is booted. Unless it's not the primary OS drive.

Have you tried doing it from command prompt? And it should say " Windows will complete the chkdsk upon restart " ?

Read other 1 answers

Ok, I built a PC a month ago and everything seemed find no problems of any sort. The other night I defragmented my hard drive and shut it down and turned it on today to a memory test and the message "Disk Boot Failure, Insert system Disk and press enter"

The computer has access to the XP pro w/ sp2 disk only as a boot device but it will not recognize it now.

I have set Cd-rom as 1st for boot sequence then hard drive I have no floppy drive and the bios has been configured to know that.

I am not sure if this means anything but in the bios the IDE Channel 0 Master says none and when I try to turn on auto detection it wont detect a hard drive.

The HDD is fully connected and has not been touched since I installed it a month ago.

I have this awful feeling that I fried the HDD when I defragmented it last night.

Any help would be very much appreciated. But please be simple this is my first build and my knowledge at this sort of thing is very very sketchy at best.

A:Error message "Disk Boot Failure, Insert system Disk and press enter" on first build

The first thing to do would be to get a new data cable for the herd drive and see if that fixes it, they are nice and cheap nowadays.

Read other 4 answers

My husband has a Toshiba laptop with Windows XP. Several times a week, for seemingly no reason, the computer will freeze. Even after waiting a long time, it will not start working, so I have done 2 things--either turned it off with the on'off button or unplugging it for a few minutes. When it comes back on, a black screen with white letters, it has a message: Bad Check SUM (CMOS). Check system, then press the F1 key. Then there is almost a whole page of writing, again black screen with white letters. So I take the cursor and start it at the to, then with the arrow take it down both columns. Then it says to press End, I believe, to save my changes (but I haven't made any changes), then I do that and it comes up with a Y or N to check about really wanting to save it. I'm sure there's something I need to keep it from doing this, but my computer knowledge is limited . Then when that screen comes up, that I just click down, I don't change anything. Thank you in advance for any help you might could give me on any of this. I have a Sony laptop that I recently had a couple of problem concerning it solved on here, so I hope that you can help me with this problem. I really didn't know where to post it, so I hope that this is an OK place for a question like this.

A:Solved: Bad check sum message

Read other 16 answers

I just reformatted a dell dimension L866R and changed the windows to xp pro. Since changing the boot order in the BIOS this message will appear. When you press any key the message just keeps repeating itself in a loop.

When you put the windows cd and don't boot from the disk windows will come up. I cannot access the BIOS to try and change the boot order which I think that it might be.

Previously the computer had windows 98SE but the video drivers would be recognized. Decided to upgrade to newer windows version.

Any suggestions would be appreciated.

A:Error message-->incorrect boot disk please insert boot disk into drive a:

Why can't you access BIOS?

Read other 1 answers

whenever i try to send an email, i get an error message that says spell check has been halted. it just poped up one day out of the blue. everything i have read on these threads are to upgrade to windows live and that should fix it. is there a way to fix the problem without upgrading. i have seen windows live and really don't like it.

Read other answers

Hi guys,

i have a pain in the butt problem with this Error 317 message. It seems fairly common so here is my log file. Hopefully you can help me....

Logfile of HijackThis v1.99.1
Scan saved at 5:57:54 PM, on 26/09/2005
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
F:\Program Files\Ahead\InCD\InCDsrv.exe
F:\Program Files\Ahead\InCD\InCD.exe
F:\Program Files\Common Files\Symantec Shared\ccApp.exe
F:\Program Files\NVIDIA Corporation\NvMixer\NVMixerTray.exe
F:\Program Files\Messenger\msmsgs.exe
F:\Program Files\Fujifilm\FinePixViewer\QuickDCF.exe
F:\Program Files\HP\Digital Imaging\bin\hpqtra08.exe
F:\Program Files\HP\Digital Imaging\bin\hpqgalry.exe
F:\Program Files\Common Files\Symantec Shared\ccProxy.exe
F:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
F:\Program Files\Norton Internet Security\ISSVC.exe
F:\Program Files\Norton Internet Security\Norton AntiVirus\navapsvc.exe
F:\WINDOWS\System32\tcpsvcs.exe... Read more

A:Error #317 message...please check my logfile

Hello and Welcome to TSF!

Please subscribe to this thread to get immediate notification of fixes as soon as they are posted.

You do not appear to have an anti-virus application installed on this machine. Let's start off by getting you a free but yet effective antivirus program. Please choose one from any of these 3 programs which are free for home use: AVG Anti-Virus
Avast Home Edition

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

Please download these additional files/programs. Do not run them until instructed to do so.
Unless otherwise stated, they should be stored in same directory as the HiJackThis program.

CleanUp.exe - Install.

KillBox v2.0.0.175.exe (it's important that you get version v2.0.0.175)


This webpage would not be available when you're carrying out the fix. Please save the following instructions in Notepad. I have customed my instructions on the assumption that you are using Notepad. It may lead to some confusion should you choose to do otherwise.

If there's anything that you don't understand, kindly ask your questions before proceeding with the fixes. There should not be any opened browsers when you are carrying out the procedures below.


= = = = = = = = ... Read more

Read other 2 answers

I have a computer that wont boot up. It gives me an error message right after checking the IDE's and recognizing all drives. The error message say's "secondary IDE channel no 80 conducter cable installed". It then continues to boot untill it reaches a blue screen of death that comes on for a flash too fast to see what it says. then restarts itself and asks me i want start in safe mode.

I checked thi ide cable conections. no problems

Any info would br helpfull

A:BSoD error message after IDE check

Read other 12 answers

I have Win7 and I have an Extturnale Hard Drive G: and I ran Check Disk on it.
I Run my DOS Promt as ADMIN and type
chkdsk F/ R/ G:    and hit Enter and it Ran good.
Now I want to read the Report Log so I go to my Run Box and type
Then click  Event Viewer
Then Click  Win Logs
Then Click
And on the Right I am looking for
Win init Log
I do not see it what am I doing wrong?

Read other answers

HI all , i have scheduled a disk check and restarted my pc .. it ran the disc check and then restarted only to find out that its doing the disc check again ? should i be worried about this , or how do i stop this from happening ..everytime i check to see if my disc needs to be defragged i run a disc check first then i defrag the hard drive . but this time its gone HAYWIRE . or am i up in the night ? thanks for the help
Cheers MGT

A:disk check ?

Read other 10 answers

My PC always asks for running Check disk, even if i shutdown and restart properly

Read other answers

I am having a lot of problems... I lost a bunch of icons from my 8.1 start page, my MS office isn't working... I have to resign in to every site I go to even though it's checked to remember me. I got this message but how do I do this?

A:How to do check disk

Try the batch file in my other post first.

Then this---

Read other 5 answers

After running on the main hard drive, is there a log that saves?

A:Is there a log for disk check?

Hello CalusBlade,

"How to Read the Event Viewer Log for Check Disk (chkdsk) in Windows (7 or Vista)":


Read other 1 answers

Hello, friends,

I have been trying to clean up and maintain the computer my kids use. It's a Dell Dimension 4300 desktop, running Windows XP Home Edition, Service Pack 2, Pentium 4, with an 80GB harddrive and it is updated to the best of my knowledge. It has tons of empty space on the drive, so I know for certain that's not the issue. Before I started any of my maintenance, I turned off System Restore. I've run everything in Safe Mode and in the separate accounts in regular mode:

Symantec found nothing.
Spybot - found CasaleMedia - which I deleted. I also blocked that site in both IE and Firefox after deleting all cookies and temporary files. I then searched for it on the drive and found nothing (which I know also means nothing ).
AdAware - found nothing.
Spyware Blaster is updated and running.
I ran Defrag several times.

But the computer refuses to run a check disk - no matter where I am (safe mode or accounts). I always heard that you have an issue if the disk check won't run. I had thought in the past that disk space was the main issue, but I know that's not a problem on this system. Any ideas? Am I being paranoid for nothing??

Thanks, guys, for all of your help!


A:Check Disk?

There is a known issue with CHKDSK in XP Home and Professional. Here is a Microsoft update (download) that may solve your problem. If it does not please post and let us know.Good luck.Windows XP Home and Professional Edition Patch: NTFS chkdsk.exe Update

Read other 3 answers

I 'm sorry if this is the wrong place to post this,but,I'm beside myself. I'm not very experienced on computers,but I can't get the disc check to run. I've tried to go to computer,properties,then tools the the check box, then to schedule a check upon restart,but the UAC box for permission never comes up,nor does it start when I restart the computer,what in the world it going on here it driving me nuts!! I am not good enough to go into the command prompt to do it,I don't know really how and not brave enough to try it. I just don't know about it. Could someone please let me know what is wrong? I have an Inspiron 531with Home Basic. Just the Basic computer.

A:Cannot get Check Disk to run

Hi dayton5959 and wlecome to Vista Forums

Have a look at the following Tutorial to see if it helps: Check Disk - chkdsk

Read other 5 answers

Hi I am new to this site. I am working on a PC for a friend. Its a HP Pavillion m7650n with XP Media Center. My computer keeps locking up in the first phase of checkdisk when I boot up the computer. I try to boot in safe mode to run checkdisk but my computer keeps locking up at mup.sys.

Do I need to replace the HD?

I cannot get into windows at all now. They have lost there xp recovery media disc. Is there anything else I can do with out formatting the hardrive and starting over?

Read other answers

I recently had an error on my computer that was very strange. I was playing a game on steam and all of a sudden my internet didn't work. I tried doing system restore. When i tried this i got the message there are errors on the disk cannot be complete. So i tried running check disk which then told me i cannot run while c is in use. So i clicked the schedule a check disk. Which is supposed to start when i restart my computer the next time. The problem is when i restarted my computer the check disk never runs. How can i force my computer to run check disk. I also tried starting in safe mode with command prompt and typing chkdsk /f and the same thing happened.

Read other answers

Hello No matter how hard i try i cannot get disk check to run either from cmd or disk properties in win7 home premium.The laptop reboots and counts down to 1 and stalls.Cant even skip because keyboard appears unresponsive during countdown.Have installed an alleged hotfix from microsoft to no avail.Can run chkdsk in read only mode but as soon as you add any parameters it stalls at reboot.Any help gratefully recieved.

A:Cannot run disk check help

try doing system repair or type in your cmd "sfc/scannow" without the quote. It would be better if you could boot in safemode

just wondering if you put /f in your command

chkdsk (drive letter): /f

Read other 9 answers

I have Vista Home Premium, 32 Bit O/s. A few weeks ago, the computer started doing a complete Check Disk everytime I boot up. It says to hit any key within 10 seconds to stop the process, but no key will stop it. It takes over an hour to complete!!!!!!!

How can I stop the Check Disk from starting each time I start the computer?

A:Check Disk

You may have a problem, but not chkdsk. Your hard drive may be getting ready to die. Back up everything, then take this test.


Read other 2 answers

I'm having trouble getting the disk check tool to run on a laptop with Windows 7 Home Premium 64 bit. Whenever I schedule a disk check and restart the computer, absolutely nothing happens -- my system simply boots up as it normally does.

I ran the system file checker when I first encountered the problem; it told me that it couldn't fix all issues, and upon checking the log there is a problem with the autochk.exe system file. I found this Microsoft hotfix and tried to install it, but received a message that said "This update does not apply to your computer." I can't run a system restore to fix the problem because it's been over a year since I last checked the disk successfully, so the restore point that I need is almost certainly long gone. I also cannot perform a system repair because my computer manufacturer did not ship a Windows 7 installation CD with the laptop. I can revert my computer to it's original factory state, but as far as I know I can't simply repair system files, and I do not have a Windows 7 disk from which extract a new autochk.exe file.

Any suggestions would be greatly appreciated. Thank you.

A:Disk Check Won't Run

Hello IHeartRocks, and welcome to Seven Forums.

You might see if downloading and running the 64-bit (x64) System Update Readiness Tool, restart the PC afterwards, and try the sfc /scannow command again may be able to repair it.

Hope this helps,

Read other 9 answers

Hi... A week ago, I ran Check Disk on my old, corrupted hard-drive to see if it could help me access anything left on it. (physically, a different hard-drive than my system. its five years old)

While still in Windows, I left it overnight.
I rebooted later and it started another scan before windows booted. I let it be.
Thankfully, things are a bit better since the scan.
But now it tries scanning before loading Windows all the time.
I like to turn my comp on in the morning, and go do things while it loads. I dont want to stand around to 'press any key' to cancel the scan.

How do I get this to stop? There wasn't even a visible option to scan at boot to begin with.

Also, what is the longevity of an average hard-drive? (I always end up with a Maxtor)
Should I buy a new one every five years?
My old drive likes to tell me 'the disk in drive F isnt formatted..." all the time.
But thats getting off this topic...


A:Check Disk won't go away

It won't stop because it keeps detecting problems on the drive. If you really want it to stop pull the drive out.

Read other 2 answers

I get an error message that I do not have sufficient priviliges to run a check disk on my laptop but I am the only user/administrator on the pc. How do I invoke the chkdsk utility to run on my laptop?

Read other answers

I ran check disk but never saw the results. How do I get them?

A:check disk

You can find the results of a chkdsk session by going to Event Viewer, (Start/Run and type eventvwr.msc and press enter) highlighting Applications, and scrolling down the list looking under the Source column for Winlogon (sort by name).

Read other 1 answers

hey guys, just this morning this started happening to my computer. nothing really set it off (that i know of).

i turn the computer on and it gives me a variety of things to choose from. Safe Mode, Safe Mode with Networking, Safe Mode with Control Prompt, Last Configured System or Start Windows Normally.

with any of these choices i'm directed to the blue-screen disk check. if i skip it or let it go i get the same result, a black screen with my curser frozen and an annoying high-pitched continual beep.

anyone know what this is or how it could be fixed?

A:disk check?

Read other 8 answers