Over 1 million tech questions and answers.

Windows 7 on Dell XPS L401X Blue Screened, Startup Repair not loading

Q: Windows 7 on Dell XPS L401X Blue Screened, Startup Repair not loading

I am trying to sell my Dell XPS L401X (XPS 14) that I bought in December of 2010 but I have encountered a serious problem with it. I loaded the computer from factory settings as it had blue screen and refused to start up without startup repair and dell datasafe backup or w/e that program is called. I loaded it up, installed Google Chrome, cleared my history on IE, downloaded MSE, the latest nvidia drivers and java 7 64 and deleted all those and emptied the recycle bin once done installing those. I shut down the computer to install updates and get a blue screen as soon as it passes the startup screen. Every time I attempt to launch using startup repair it just opens up another window with a black screen and the option of startup repair and normal repair, never actually going to startup repair, just continually refreshing every time I select startup repair. Please help I need a permanent fix ASAP as I don't want my buyer to experience these issues and send it back.

RELEVANCY SCORE 200
Preferred Solution: Windows 7 on Dell XPS L401X Blue Screened, Startup Repair not loading

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Windows 7 on Dell XPS L401X Blue Screened, Startup Repair not loading

Proceed through the steps in Troubleshooting Windows 7 Failure to Boot and see if that resolves the problem.

You may also consider Clean Reinstall - Factory OEM Windows 7 since the system is no longer under warranty anyway. Just make sure you can read the key on the sticker prior to doing those steps.

Read other 1 answers
RELEVANCY SCORE 80.4

Hi Everyone,

I'm having some weird problems with my Dell Inspiron laptop. While using my laptop I got a "paged fault in nonpaged area" blue screen and it just died. When it booted back up the screen was covered in weird wavy blue dots. These disappeared when the windows vista progress bar was loading, but it never even gets to the log in screen. I thought it might be windows, so I tried the dual boot of Ubuntu and that didn't get to the log in screen either. I then tried reformatting the computer, and I could boot to CD and install windows. But then after rebooting I get the same wavy dots/stripes across the screen. They go away when the progress bar comes up loading vista, but once again the screen goes blank and windows vista log in fails to load. I've tried the dell diagnostics, and all the parts pass - so I'm not quite sure what the problem is.

The laptop itself is about 4 years old. Its a Dell Inspiron 9400, Intel Centrino Duo processor. nVidia 7900GS graphics card.

Any help would be much appreciated.

Cheers

Nelson
 

Read other answers
RELEVANCY SCORE 80.4

Hi Everyone,

I'm having some weird problems with my Dell Inspiron laptop. While using my laptop I got a "paged fault in nonpaged area" blue screen and it just died. When it booted back up the screen was covered in weird wavy blue dots. These disappeared when the windows vista progress bar was loading, but it never even gets to the log in screen. I thought it might be windows, so I tried the dual boot of Ubuntu and that didn't get to the log in screen either. I then tried reformatting the computer, and I could boot to CD and install windows. But then after rebooting I get the same wavy dots/stripes across the screen. They go away when the progress bar comes up loading vista, but once again the screen goes blank and windows vista log in fails to load. I've tried the dell diagnostics, and all the parts pass - so I'm not quite sure what the problem is.

The laptop itself is about 4 years old. Its a Dell Inspiron 9400, Intel Centrino Duo processor. nVidia 7900GS graphics card.

Any help would be much appreciated.

Cheers

Nelson
 

Read other answers
RELEVANCY SCORE 76.4

Window XP Professional: when starting, interupted by blue screen with error message Fat 32 D:volume (something) 1DOB-3241 verifying files and service and then system checks out OK and starts. Since loading Windows Live and Live security have had very slow response until all of it is loaded (sometimes up to 45 minutes before I can get on Internet Explorer).
I think my D drive is too full--cannot complete defrag since there is only 9% free space on disk. C drive is nearly empty. I think I have to move some of these files to C but I don't know how. Does anyone know if these problems are connected to error message at start-up or are they separate issues? Had broadband service check over weekend and they said its not their problem. I'm not too techy but fast learner if someone has patience to help....Thanks.
 

A:Blue-screened error @ startup: D: volume service Fat32

To move the files right click on them and select "copy", then make a folder on your C drive and in that folder right click "paste"

Once the files have been moved, you can go back to the D drive and delete them. Don't delete all of the files on D, just the ones you put there.

You should not store any of your files on the D drive, this is most likely a restore partition and should not be used by you.

.
 

Read other 2 answers
RELEVANCY SCORE 69.2

Hi,

I was just using my PC when it disconnected from the internet. Other devices were still connected so I figured the issue must be with my PC, closed my programs and then tried to restart my PC.

This is when it blue screened with a DRIVER_POWER_STATE_FAILURE error. Once the blue screen reached 100% it hung for a good five minutes before I decided to try a hard reset and now it's stuck on the loading wheel and won't boot up. I'm scared to try another restart but I'm not sure where to go from here.

Any help is much appreciated

Read other answers
RELEVANCY SCORE 69.2

My computer occasionally is freezing up randomly with a blue screen.The error is:

*** STOP: 0X00000124 (0x0000000000000000, 0xFFFFFA800082ED028, 0x00000000BE000000, 0X0000000000800400)

System information:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7 CPU 870 @ 2.93GHz, Intel64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 8189 Mb
Graphics Card: AMD Radeon HD 6800 Series, 1024 Mb
Hard Drives: C: Total - 953766 MB, Free - 66672 MB; E: Total - 953866 MB, Free - 902255 MB;
Motherboard: ASUSTeK Computer INC., Maximus III Formula
Antivirus: Kaspersky Internet Security, Updated and Enabled
 

A:Windows 7 Blue Screened 0x00000124

Read other 7 answers
RELEVANCY SCORE 69.2

when i start up..it blue screens the following message.....stop: {0000218 } registry file failure {
registry cannot load the hive ( file) ;
/system route/system 32/config/software
or its log or alternate.
it is corrupt,absent, or not writable.beginning dump of physical memory
physical memory dump complete contact your system administrator or technical support group.

Please help me
 

A:windows 2000 pro...blue screened

Read other 8 answers
RELEVANCY SCORE 68.4

Hello tech guy forums,

First I want to say I used to have an account here and the people of this forum walked me through all kinds of hardware/software problems in the past, so thank you!

This time around I suspect the culprit is hardware, but I want to start here in case it is a possible OS issue. Here's the gist:

One night I tripped over the 1/8 inch speaker cord that was plugged into it's corresponding jack. The tension was enough that the plug actually broke off in the jack and the laptop took a 3' spill onto the carpeted floor.

The next time I tried to start my laptop, it took me to an error screen saying Windows had suffered an error and was unable to start. It gave me the option to start normally or run the Windows repair tool, which I opted to try.

Running the repair tool that time and each time since has resulted in a black screen that says "Windows is loading files..." followed by a low-resoltion Windows OS background and a loading wheel next to the mouse cursor that spins without anything happening.

After several attempts, I downloaded a Win7 .iso and put it on a bootable USB drive. I changed boot priority in BIOS and started up. This time I get the same "Windows is loading files..." screen followed by an "Install Windows" dialog box that asks for the installation language, time format, etc.

When I click "next" and "install Windows" it takes me to a "Setup is starting..." screen with ... Read more

Read other answers
RELEVANCY SCORE 68

Alright so I'm getting these errors, first when I turn on my laptop, I get the windows is loading files before it just use to freeze there.

Now it goes to Startup Repair and after the scan is done it says "Startup Repair cannot repair this computer autmatically, it gives me two options send information about this problem and don't send both are useless and nothing happens.

In problem details it says this:

Problem Signature:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 0.0.0.0
Problem Signature 02: 0.0.0.0
Problem Signature 03: unknown
Problem Signature 04: 0
Problem Signature 05: unknown
Problem Signature 06: 1
Problem Signature 07: unkown
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

After this it says something about Read our privacy statement online

I don't have any repair disc nor a Windows installation disc, so if there is any other way to fix this please let me know.

I also have a secondary OS Installed on this computer, it used a GRUB menu but I replaced it using the command prompt (bootrec.exe) in the Startup Repair. This OS made a lot of partitions but I never choose to replace any Windows partition I don't know if this can help. I had another problem before this when I deleted the partition in which the GRUB boot menu was at, meaning I couldn't access any OS, I fixed it installing anpther OS with a new Grub menu which replaced the deleted one. Both OS's worked fine until I shut my laptop down and trie... Read more

A:Windows 7, windows is loading files and startup repair error

Do you still need assistance with this issue?

Read other 1 answers
RELEVANCY SCORE 68

I have Windows 7 Ultimate installed on my computer and had it up to date on all of the Windows updates. I also have Windows Vista installed on another drive on the computer.
I was using it earlier and it suddenly blue screened at random. I was just browsing Reddit or something when it happened.
Once it blue screened I couldn't get it to work again. The error code it gave me was 0x000000e for both my Windows 7 install and Vista install (both were working fine before this blue screen).
I got on my laptop and downloaded the system repair and put it on a disc. I ran it on my desktop (the computer having issues) and it repaired the boot issues. However, on the Windows 7 install I can get to the login screen and log in now, but it will spend about a minute or two sitting at the 'Preparing your desktop' message before coming up with a screen with nothing but a teal background and in the bottom right it says this:

Windows 7
Build 7600
This copy of Windows is not genuine

It is a legitimate copy and has worked fine for a year before this happened. The background looks like this minus the taskbar and icons: http://www.guidebookgallery.org/pics...win2000pro.png

The Vista install seems to work fine now though. However, I cannot access the drive that has Windows 7 installed on it from Vista anymore. If I try opening it, it will say 'Access Denied'.
Also, the drive letter for Windows 7 changed after running the repair. It was originally drive letter G but it has been changed to F.

... Read more

A:Windows 7 issue -- Blue screened then odd things happened

interesting... ok lets think now... ok i'm assuming you have some knowleage about deul booting.

few questions, can you log in to windows 7 via safe mode? also was this repair disc for windows 7 or vista? and do you have the windows 7 installation DVD?

Read other 8 answers
RELEVANCY SCORE 67.6

Hi guys,

I'm having an issue with my system that I hope someone will be able to help me with.

Basically I am stuck on a 'Startup Repair' loop. I am running Windows 7 64bit and did not have any startup / booting issues up until a few days ago.

When I was last using my system it was working perfectly. I left it for an hour or so and when I returned I was bemused to be greeted with a message from Startup Repair saying that it could not fix problems with my computer. Obviously it had crashed in my absence and upon automatically restarting began the startup repair process.

So I restarted it myself, and before having the option to hit F8 and open Advanced Startup Options (such as safe mode, I usually suspect dodgy drivers in such circumstances) I was instead greeted by "Windows is Loading Files ... " followed by Windows immediately attempting a startup repair that it fails. It said it was 'Attempting Repairs' but ultimately was unsuccessful in the end.

So I read up on the following threads here ...

Windows stuck at loading files, can`t run repair
Windows 7 crashes on startup. Can't restore, repair or repair install

... along with some other similar ones and tried the solutions.

I tried using my Windows 7 installation disc to use CMD to run bootrec /FixMBR /FixBoot /FixBCD. When I used /ScanOS it said "0 Windows installation found". After trying this a few times I was eventually presented with the "The Windows Boot Configuration Data file is miss... Read more

A:Stuck on Startup Repair Loop (Windows is Loading Files ; no safe mode)

The more I think about it, the more I suspect this could be related to a dodgy Windows update having installed itself on my system.

A - when I left the system the system prior to the first crash it was scheduled to install a group of updates, which I suspect it did followed by an automatic restart which led to the Startup Repair loop that I arrived back to.

B - when I shut down the system last night it was installing the latest updates again (after installing a few hundred during the day) to bring it back up to date - and when I restarted the system this morning I was greeted by the Startup Repair loop. I have a feeling that a Windows update released in the last week or so is causing the issue.

Does anyone know how I can go about finding a list of Windows updates and uninstall them via command prompt?

(EDIT: In the meantime I have run sfc /ScanNow twice via command prompt. Both times it reports that it found and fixed issues, but the Startup Repair loop continues upon restart.)

Read other 4 answers
RELEVANCY SCORE 66.8

Windows 7 startup repair frozen at blue screen?
I turned on my laptop and it said "windows failed to start....." it gave me the options of "launch startup repair (recommended)" and "start windows normally." I just chose to start it normally cuz I thought nothing was wrong, but then it just took 5 mins and took me back to the initial screen. This time i chose the recommended option, and this time it takes me to a screen with the blue windows 7 wallpaper, "thinks" a little, then does nothing (there is a cursor but nothing to click on). Pls help. In want to use my laptop.

things to take into consideration.
it is been 6 weeks since I last used it because the charging point was broken & I fixed it but it started ok then the battery died so i plugged the charger & then all that stuff started.

i used F8 mode safe , it stopped while loading & took me back to the same thing . I tried every thing but all in vain & I don't have the windows cd now what to do
 

A:Windows 7 startup repair frozen at blue screen ?!!?

Try to run that startup repair again, if that doesn't help, you need ERD commander CD to run the repairs or system restore there.
 

Read other 1 answers
RELEVANCY SCORE 66

Hey everybody.
So, when i woke up i saw an error on the windows update in the taskbar. Seems like the computer tried restarting but failed. Also the sound didnt work when i tried playing a file. So i rebooted the system. Computer went stright to system repair mode where it supposedly succeeded. Computer rebooted itself and in the windows screen i got the blue screen of death.
From there it went to the system repair which failed
- os is windows 7 64
- computer is up to date with antivirus. - cant get into safe mode but can get to bios options.
- saw some people had trouble with theKB3045999 windows update Including critical failure to reboot. Maybe thats it?
Last thing, when looking at the startup repair log it seems as if all the tests went fine but at root cause found: registry is corrupt.
Computer was in sleep mode the entire night.
Any help? Thanks you

A:startup gets stuck at blue screen. windows repair fails

Welcome to Bleeping Computer!
 
Use this tool to do a System Restore to a time before the Windows Update... http://www.bleepingcomputer.com/tutorials/start-the-windows-7-recovery-environment/ .

Read other 4 answers
RELEVANCY SCORE 65.6

I have a Packard Bell easynote (TM98-GN-030UK), and have had it since Christmas.

On Wednesday, it failed to startup, flashing a quick blue screen and then immediately rebooting. Therefore I cannot get information from the blue screen.
The startup repair option goes to a default blue screen with green nature-y bits. It loads no options, even if I leave it for an hour.

I have tried the system repair disk. It goes to the same background, asks for my language/keyboard settings, and then when I click 'next' again does nothing.

So, I cannot access any kind of repair or restore options as neither does anything beyond show me the default background.
Thanks,
Alsvid

A:Both Startup Repair and System Repair Disc just go to blue backgrounds - no options given!

Have you read the...PB documentation on using these disks?

http://il.packardbell.com/pb/en/IL/content/download

Louis

Read other 4 answers
RELEVANCY SCORE 65.2

Hey there, I hope you guys can help me.

I have a Dell XPS M1210 Notebook computer running Windows Media Center Service Pack 2 . I'm on a different computer now because I can't get that one to work properly.

It seems that everything is just hosed and I just want to reinstall Windows. It won't boot up to either regular mode or safe mode - it just blue screens on me. I can't run any of the repair utilities because when I load the Windows CD in the onboard cd drive, it only gets as far as loading all the files and then it blue screens on me every time. For that same reason I can't reinstall Windows.

I ran ERD commander but for some reason it thinks the XP Media Center installation is an NT Workstation edition, and it doesn't support that. I was, however, able to use ERD to get all of my files transferred onto an external drive, so at least I'm not losing anything.

But the problem is the Windows install disk only gets so far and then it blue screens. This has happened before when I was working on a desktop computer, and all I had to do was swap in a better CD Rom drive and it installed windows just fine. The CD Rom drive on this laptop makes weird noises. I think its the same reason it doesn't see the proper installation when I run ERD. But this is a notebook computer. I don't think it's an option to use another CD drive. I have an external USB CD Rom drive that I plugged in, but BIOS wouldn't see the drive, and so I couldn't boot to it. I even loaded Bootlt NG but I c... Read more

A:Dell Notebook/Cant Boot/Blue Screen When Loading Windows

On my Inspiron there is a recovery partition on F11 (or CTRL F11), press F11 up and down a few times as you switch on the xps. I don't know if this is installed on the xps range but you could try. Are you under warranty?

Read other 4 answers
RELEVANCY SCORE 65.2

Hey there, I hope you guys can help me.

I have a Dell XPS M1210 Notebook computer running Windows Media Center Service Pack 2 . I'm on a different computer now because I can't get that one to work properly.

It seems that everything is just hosed and I just want to reinstall Windows. It won't boot up to either regular mode or safe mode - it just blue screens on me. I can't run any of the repair utilities because when I load the Windows CD in the onboard cd drive, it only gets as far as loading all the files and then it blue screens on me every time. For that same reason I can't reinstall Windows.

I ran ERD commander but for some reason it thinks the XP Media Center installation is an NT Workstation edition, and it doesn't support that. I was, however, able to use ERD to get all of my files transferred onto an external drive, so at least I'm not losing anything.

But the problem is the Windows install disk only gets so far and then it blue screens. This has happened before when I was working on a desktop computer, and all I had to do was swap in a better CD Rom drive and it installed windows just fine. The CD Rom drive on this laptop makes weird noises. I think its the same reason it doesn't see the proper installation when I run ERD. But this is a notebook computer. I don't think it's an option to use another CD drive. I have an external USB CD Rom drive that I plugged in, but BIOS wouldn't see the drive, and so I coul... Read more

A:Dell Notebook/Cant Boot/Blue Screen When Loading Windows

The only clue I see is the CD drive doesn't seem to act right. Hardware failure is often the cause of BSOD. is it possible to remove the offending drive and try to boot?

A laptop doesn't offer many hardware trouble shooting options.
 

Read other 1 answers
RELEVANCY SCORE 65.2

A friend just got a new Dell. How can she stop DataSafe Backup from loading at Windows 7 startup short of deleting the application?

A:Stop Dell DataSafe Backup loading on Windows 7 startup?

Boot into safe mode (F8) launch services.msc and disable it. There may be other consequences however.

Read other 4 answers
RELEVANCY SCORE 63.2

So I opened my laptop this morning, tried to log in and was stuck on the welcome screen for about 10 minutes. I restarted using the power button and when restarting it said "loading files" then went to a black screen. I restarted again and it gave me the option to select a safe mode or startup normally. I selected safe mode and I was stuck on the startup bit with the windows logo for 10 minutes and then it went back to the selection screen this time with the options being startup repair and launch windows normally. I selected startup repair and it went to a black screen for 10 minutes, then went to a screen like the login screen background but grey. It wasn't frozen and I could still move the mouse so I could tell it was loading and I waited >20 minutes and it didn't change. I restarted and did the same thing multiple times. Does anyone know what to do ):
I've had no Internet for the past week so couldn't have downloaded a virus. I'm currently on my phone.

A:Startup Repair not even loading, please help.

Work through these steps for Troubleshooting Windows 7 Failure to Start.

In Step 5 burn or write to flash stick the install DVD to do the repairs or reinstall required.

Read other 1 answers
RELEVANCY SCORE 62.8

I have an Acer Aspire 5750-6677. I3-2310m. It has been performing the startup repair for over a day. It's now, finally (I think), saying "windows is loading files". It has been doing this for HOURS! Can I simply turn it off and attempt a different method or will that make it worse? BTW: it came with zero discs of any kind when I purchased it new in July 2011. I appreciate any time you are able to give. This is my work comp too and I can't lose the info that's on it.

A:Startup repair info while "windows is loading files"

Work through these steps for Troubleshooting Windows 7 Failure to Boot which disinfect then attempt to repair system files to start Win7.

If these fail the steps work up to copying out your files to run Factory Recovery or Clean Reinstall - Factory OEM Windows 7.

Read other 8 answers
RELEVANCY SCORE 62.8

This is my first time being on these forums. If this is the wrong place to post about this, I apologize in advance.
Background on how this all started
vvvvvv
I have a hp pavilion dm4 laptop with windows 7 home premium OS. This laptop is about a year and 2 months old. Warranty has expired. 2 months ago, my laptop started making this loud fan noise. I checked the CPU's temperature through software and it was at 78 F (which i thought was normla). I decided to sit my laptop higher by stacking books underneath it. I dropped the laptop on accident because I was sweaty and nervous. The fan noise stopped. That caught my attention. Every time the fan became loud, my FPS for the games I was playing lowered. That made me mad and frustrated. I remembered once the laptop was tapped a little, the fan would stop and my performance would go back to normal. The tap eventually progressed into a light smack then to a hard smack. I smacked my laptop everytime this happened because of frustration (Im 15 and i do dumb things a lot). Last week, the fan just continued and would never stop. I didnt stop smacking it either.
Situation
vvv
So today, I tried to smack the laptop as little as i could and then my laptop froze. It stayed frozen for about 1 minute. Then I restarted my laptop. When it was rebooting, I saw a screen I have never encountered before; "Windows is Loading Files Screen". I waited patiently and the fan of my laptop continued to be loud. Then, for about a second and ... Read more

A:Startup repair after "Windows is Loading Files".Cant start safe mode

Welcome to the Forum.
It sound like the first problem is overheating. This can cause many more problems all by itself.
If it was my laptop I would take it apart and clean completely. I would also check the operation of the fan. (If in doubt replace the fan).
If you don't feel comfortable taking the laptop apart and cleaning I would take it to a shop.
You must not use the laptop until the cooling problem is solved.

Read other 3 answers
RELEVANCY SCORE 61.6

I have an Asus F9Sg laptop running Vista Home Premium; I was unable to boot yesterday, and used the Microsoft recovery disk to run startup repair several times, at which point the startup repair utility told me no more problems could be found.

Now, when I boot, things progress to the Windows loading screen (with the green progress bar at the bottom of the screen,) and no further; the green bar does not freeze, but continues on and on. I have let it run a couple times upwards of 4 hours with no change. I tried safe mode, and the same thing happens.

I'm away from home and REALLY don't want to be without my laptop; here are my questions:

Are there any more robust bootable disks I could d/l and run to try and fix this, other than the Microsoft recovery disk, or any worth purchasing that might fix the problem?

There are also local repair shops, would it be worth taking it to them, or will they essentially be doing the same thing?

Am I just going to have to reformat/reinstall?

Thanks

A:Endless loading screen following startup repair

on balance i would say reinstall you could try using a linux live cd to try to move any files you need to save onto say a usb drive /pendrive once done proceed to reinstall although you may end up with a foldre called windows old on your new install but backing up is always best.linux is free many flavours ie ubuntu xubuntu etc google and read up on them then choose

Read other 1 answers
RELEVANCY SCORE 61.6

Have an HP Pavilion dv2700 that keeps showing a blue screen with the message:

Problem event:blue screen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional info about problem:
BCCODE: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack:1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidmp\071515-21184-01.dmp
C:\Users\dv2000\AppData\Local\Temp\WER-31465-0.sysdata.xml

What can the problem be? Please HELP!
 

A:Blue Screened

Hi, some reasons for Blue Screens
New hardware - software installed.
Device driver - Video driver - corrupted - faulty.
Faulty Ram - Overheating - Dying hard drive etc.
======
Let us have some Pc specifications.
Check and post
TSG System Information Utility - found here.
http://static.techguy.org/download/SysInfo.exe
======
Post the Minidump files
Create a new folder on the desktop and call it dumpfiles [or something similar]

Look in c:\windows\minidump
Copy the last 4 minidump files to that folder.
Close the folder and right click on it and select Send To Compressed [zipped] Folder.
Windows will compress the file and then save the new zipped file in the same location.

Use the 'Manage attachments' in the 'Go Advanced' reply window below to upload that zip file here as an attachment.
 

Read other 2 answers
RELEVANCY SCORE 61.6

Hi,

I'm new to this but I figured I'd give this a try. This is a repost of my earlier post I did last week. no replies .

I have an Acer Aspire 5110 laptop and recently I've been getting the bluescreen when starting the laptop. Sometimes it pops up after I login, sometimes on the password screen. The bluescreen usually has HSFHWAZL.SYS (i think). After this, windows usually does a disk check. Sometimes it finds nothing, other times it truncates like 15-20 files.

Currently I'm running WindowsXP Media Center Edition.

I downloaded HijackThis and here's the log file.

If I'm missing anything, please let me know. Thanks!

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 6:19:20 PM, on 30/10/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSvcHst.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Acer\Empowering Technology\ePerformance\MemCheck.exe
C:\Program Files\Symantec\LiveUpdate\AluSchedulerSvc.exe
c:\Program Files\WIDCOMM\Bluetooth Software\bin\btwdins.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
... Read more

A:Help im getting blue screened!

Blue screen is Blue screen of Death if it occurs it means that there is some issue with the operating system or the hardware.
it may be the virus issue.
If the error occurs follow the on the screen instructions if it says to restart the computer in the safe mode, try that.
 

Read other 3 answers
RELEVANCY SCORE 61.6

Hi everyone im new to this site but i thought you could help me out?
My computer keeps going thru a loop of blue screening and then restarting really fast. i managed to get the errors down on a piece of paper and would like to know what it all means. i can even get past the Xp load screen.

Stop:0x00000024(0x001902fe, 0xf7975378, 0xf7975074, 0x86e49805)

the only thing i put into my pc earlier in the week was a new video card and its driver.
eVGA geforce 8400gs 512MB if that helps
 

A:I keep getting blue screened over and over again...

Read other 7 answers
RELEVANCY SCORE 61.2

Hello & thank you for taking the time in reading into my problem.

I have owned my acer aspire 2930z from new for about 4 years.

Since I have had it, I installed Windows 7 as vista that came with it was always leaving me with tonnes of viruses. Windows 7 was a copy from a friend.

I have not used the laptop for a good while but now it just boots up to the startup repair. Dosent seem to go any further. Please note: Pressing F2 when it starts up & pressing F8 functions still work.
It always seems to get hot quickly & powers off completely after about 20-30 minutes ( I have noticed the fan making a different noise than it used too.

When I power the laptop I need to constantly use the power cable as the battery only last minutes. I know this needs replacing. I noticed when I used it at some point last year that the disc drive would not work. It makes a noise but don't think it's reading discs. Again this will be on my list of parts.

What I would like to be able to do is get some advice on getting it fired up. I then would like to completely wipe the laptop & start again from fresh. I understand I need to purchase a few parts for it.

A:Acer aspire 2930z on loading to startup repair

Can I also point out, when I start the laptop it boots up to Windows recovery. In the go to start Windows normally it the goes to starting Windows for about 2-3 minutes & then back to Windows error recovery.
If I repeat this, it eventually goes onto blue crash dump screen for about 10 seconds. Eventually it will go onto startup repair but says attempting repairs but never sorts anything.

Read other 1 answers
RELEVANCY SCORE 60.8

Ok this is how it started...first I will list sys specs so that you know what it is I am running...

Pentium 4 2.4ghz 400mhz bus
1536 meg ddr 2700 ram
Geforce fx 5200 256 meg video card
Intel motherboard Model: D865gbf
Windows XP Pro
Browser: Mozilla Firefox ( i do not use IE )

Keep in mind I have been running a smooth system for over a year now. I frequently run Ad-aware PE, Spybot S&D, Hijackthis , Nortan system works 2004, Avast Virus removal program, and System Mechanic. I am very contious of what and where I download from... I do currently have Kazaa and Limewire on my computer but I do not download anything but music and the last few months the only program I have even downloaded that from is Limewire.

Two nights ago I was playing an online game when all of the sudden for the first time I lost connection. I figured it was an internet issue only to log out of the game and to see my internet was still up and running. I then try to go back into the game ( everquest ) but it would not connect to a server for some reason. Again I thought it was my internet... So i rebooted the computer.
While I was rebooting I noticed that it was taking an awefully long time to reboot....pausing almost a minute or two on each load screen. It normally takes my computer less then 30 seconds to reboot.

After windows was back up and running the boggyness didnt cease... I had somewhere from 4-10 second delays on clicking open a program or the internet. So normally I reboot once more to see... Read more

A:Blue Screened! ahhhhh help please

I'm not a security expert, but this looks just a little suspicious.

R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Window Title = Have a nice cup of stfu !
 

Read other 3 answers
RELEVANCY SCORE 60.8

About 2 months ago I bought a Hp G70-460US Laptop that I've been running Vista Home Premium on and it was working perfectly until earlier today when I started to get random blue screens of death. At first I thought it was just a random crash from running too many programs, but it started to blue screen ever more frequently. Earlier I restored it back to 2 weeks prior but I was unable to run programs efficiently and it still blue screened, so I backed-up all that was important onto an Ipod and did a complete system restore to the factory settings, which took about an hour, and at which point it blue screened at startup before even getting to the administrator log-in screen. I've now attempted to boot it into safe mode, however it no longer even recognized that windows is even installed and asks for it to be, and when booted regularly, it just shows a black screen. I'm fairly certain it may be a driver issue, however seeing as I can no longer boot the computer to get the blue screen, it's difficult to check what the problem actually is now. I've never had this problem before and I'm not much of a computer wiz, so I'm not sure what I should be doing to fix it. Does anyone have prior knowledge or possibly some insight on how to fix this problem? It would be greatly appreciated. I haven't given much information other than the problem itself, so if some is needed, just let me know. Also I'm new to this forum, so if this thread is in the wrong place, I apologize. Edit: I attem... Read more

A:Vista Blue Screened

Hello Werty789,
Welcome to Vista Forums!

I think that there was a little glitch that turned big (sounds weird i know).
But since you backed up all of your files thats super. I would suggest you do a clean installation of your version of vista. This way, you can have a fresh start and hopefully your BSOD will be gone. Also, make sure you allow windows to update itself after installation so it downloads and installs all the proper updates.

Let us know how it goes,
Ben

Read other 10 answers
RELEVANCY SCORE 60.8

debug-CommanderJoe-xxxx.zip.zip I was on google plus and facebook when my BSOD happened I do not know what is wrong and would like to know thank you

A:Was blue screened unknowing why

The cause of the crash is Norton/Symantec, although this crash looks to be a single one which is handled by Windows.
This means that you have nothing to worry and do not need to do anything
If this problem keeps occuring, simply reply again here with a new zip from the DM Log Collector and I'll be notified


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck FC, {fffff800714f1fe8, 8000000053c32121, ffffd0002117a0f0, 2}

*** WARNING: Unable to verify timestamp for BHDrvx64.sys
*** ERROR: Module load completed but symbols could not be loaded for BHDrvx64.sys
Driver Reference Table - BHDrvx64.sys

Read other 0 answers
RELEVANCY SCORE 60.8

I've been getting the blue screen of death several times a week, if not several times a day, for several months now. It almost always comes when I am surfing the internet, especially--but not particularly--when I'm accessing video sites such as Hulu or MSN Video, although I don't even need to be playing something in such sites--if the window's even up, it will likely give a blue screen somewhere in the next hour. Lately, though, just running a browser can cause it to blues creen.

My blue screen says at the top something to the effect of: driver-not-less-or-equal; I've never been fast enough to catch the specific numbers, but I can try if they're needed.

I've tested this in the latest versions of: IE, FF, Opera, Flock, and Safari and all equally cause a blue screen crash.

I have an Acer E380 8 month old system with:
Vista SP1
AM2 Socket MB (I believe, and don't know the exact model)
Athlon 64 X2 4400+ @ 2.31 GHz
NVIDIA GeForce 6150SE nForce 430 (I now just installed a NVIDIA GeForce 8600 GT and it did not remedy anything)
Realtek High Definition audio
2GB DDR2 RAM
320 GB Western Digital HD
Came with 250W PSU (I put in a 750W PSU to try some upgrades with the new graphics card, but somehow that combination gave more blue screens so I took both of them out)
I have about 6 USBs hooked up drawing various amounts of power and I use a Wacom tablet as my main mouse/input, but the problem started way before that...so don't know if that means anything.

I also hav... Read more

A:I'm getting blue-screened to death

Hi dgal. . .

Welcome... to your first thread in the TSF Vista Support Forum.

I see that you have been a member since last November, but this is your first thread and post. Sorry it had to be under a BSOD watch. Let's see if we can locate the cause.

I need some items and I have a few things for you as well. There is a zip file attached to this post containing a batch file named minidump-msinfo32.bat. Please download it and extract it to your desktop. Right-click on the desktop batch file icon and select Run as Administrator. The black "DOS" command screen will appear and scroll followed by the smaller Vista screen while msinfo32 runs. Give it a few minutes, then go to your documents folder where there should be a new folder named TSF_08-21-08 containing the dump files (with names similar to Mini082008-01.dmp), a text file and the msinfo32 NFO file. Zip the entire folder up and attach to your next post.

In the interim, please check WERCON - Windows Problem Reports and Solutions as it usually does contain information on the system crashes that may prove to be helpful.
START | type wercon.exe into the start search box | right-click on wercon.exe under programs above | run as admin | view Problems to Check & Problem History.

Also check the Device Manager for any red/yellow flags.
START | type dev man into the start search box | right-click on Device Manager up top under programs | run as admin

Regards. . .

jcgriff2

.

Read other 6 answers
RELEVANCY SCORE 60.8

Please help! I am new to this forum. I tried to follow a tread on this but it got so confussing. Does someone have a step by step reply? Issue is Blue screen "A driver has overrun a stack-based buffer". Its on my teen son's PC (need I say more). System has been down for months got tierd of working on it till now. The begining:
1) System starts and said it had two spywares running at same time. After 4 mins the system would freeze, not giveing much time to do anything
2) I started in safe mode and removed my Nortons since I could not this "other" spyware. After a reboot windows said it removed a few malice files. Forgot the the files for this "other" spyware" but it had a tool bar on IE and ended with (4.1?)
3) System worked fine. However as I tried to install a new antivirus I found that neither of my CD/ DVD drives would work (device manger, would not let me update driver). I even moved the drives to the other IDE controller but got the same thing. After two days I found someone who gave me step by step insrtuctions to remove two reg files. Got the drives to work.
4) Now I have this blue screen message. I have removed one by one each hardware item and I still get the problem.

Please help me! John

A:Blue screened, after other issues

Hello John, Welcome to TSF!

Please read this article? "Having problems with spyware and pop-ups? - First Steps"; follow the instructions very carefully; then, post all the requested logs and information; as instructed, in the HiJackThis Log Help Forum.
(Simply, click on the coloured links to be re-directed.)

Please ensure that you create a new thread in the HiJackThis Log Help Forum; not back here in this one.
(Please change the new Thread Subscription to ?Instant Email Notification? so that you receive an email as soon as a reply is posted,)

When carrying out The 5 Steps, if you cannot complete any of them for whatever reason, just continue on with the next one until they are all completed.
However,it is extremely important to make mention of the fact that you could not complete any of the steps in your post to The HJT Help Forum; where an Analyst will assist you with other workarounds.

Once done, please be patient, as the Security Team Analysts are usually very busy; one of them will answer your request as soon as they can.

Good Luck with it.

Kind Regards,

Read other 1 answers
RELEVANCY SCORE 60.4

Hey guys I need some help, I just brought my computer to the college dorms, set it up, and was working fine for around 4 hours. Then I got a blue screen while chatting and it said something about checking my hardware. When I restarted, it says "error loading OS".

I restarted once more pressing "delete" and checked the "Standard CMOS Features" and it doesn't show my primary hard drive, "primary ide master : none" but it shows my 2nd slave drive.

Anyone know what happen to my computer?
Is there anyway to fix this problem? No computer at college =
 

A:Blue Screened, then computer malfunctions

Read other 12 answers
RELEVANCY SCORE 60.4

yo i already did a search on "unmountable boot volume"
i have win xp pro dell dimension 8200
my question is can i use a windows xp home cd to repair my files? will it mess up my windows xp pro?
thx
 

A:help blue screened! boot volume

No it will not mess up your Pro version . . the repair will not run.

Unmountable boot volume will usually indicate a hard drive failure . . Does BIOS redognize the drive?
 

Read other 2 answers
RELEVANCY SCORE 60.4

Yesterday my machine blue screened and would not boot back up.  I ended up having to remove the harddrive and doing a chkdsk /f /r.  It does boot up, but very slow.  I ran malwarebyte and it found Trojan.Agent.Gen.  It only aloud me to quarantine.  I want to make sure There isn't anything else causing damage.
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 9.0.8112.16555  BrowserJavaVersion: 10.51.2
Run by Dawn at 11:14:17 on 2014-07-09
Microsoft Windows 7 Professional   6.1.7601.1.1252.1.1033.18.16366.10597 [GMT -6:00]
.
AV: Symantec Endpoint Protection *Enabled/Updated* {63DF5164-9100-186D-2187-8DC619EFD8BF}
SP: Windows Defender *Disabled/Outdated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Symantec Endpoint Protection *Enabled/Updated* {D8BEB080-B73A-17E3-1B37-B6B462689202}
FW: Symantec Endpoint Protection *Enabled* {5BE4D041-DB6F-1935-0AD8-24F3E73C9FC4}
.
============== Running Processes ===============
.
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\system32\atiesrxx.exe
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k GPSvcGroup
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchos... Read more

A:Blue screened and wouldn't restart

Hi there,my name is Marius and I will assist you with your malware related problems.Before we move on, please read the following points carefully. First, read my instructions completely. If there is anything that you do not understand kindly ask before proceeding. Perform everything in the correct order. Sometimes one step requires the previous one. If you have any problems while following my instructions, Stop there and tell me the exact nature of your problem. Do not run any other scans without instruction or add/remove software unless I tell you to do so. This would change the output of our tools and could be confusing for me. Post all logfiles as a reply rather than as an attachment unless I specifically ask you. If you can not post all logfiles in one reply, feel free to use more posts. If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed. Stay with me. I will give you some advice about prevention after the cleanup process. Absence of symptoms does not always mean the computer is clean. My first language is not english. So please do not use slang or idioms. It could be hard for me to read. Thanks for your understanding.    Scan with aswMBRPlease download aswMBR ( 4.5MB ) to your desktop.Double click the aswMBR.exe icon, and click Run.There will be a short delay before the next dialog box comes up. Please just wait a minute or two.When asked if you'd like to "download the latest Avast! virus d... Read more

Read other 8 answers
RELEVANCY SCORE 60.4

keep getting blue screened and my computer reboots and I cannot figure out the problem. It gives me different errors every time. And seems to happen at random not during anything in particular.
My build:
Amd phenom II 3.6 ghz quad core psu
Gtx 950 sc gpu
Mai 970 a motherboard
G skill Ripjaw 2 x 4 gb ram
Cooler master 400w power supply
Western digital 500 gb hard drive
Windows 10 64 bit os

The errors I managed to see are
Driver IRQL NOT LESS OR EQUAL (dxgmms2.sys)
Page fault in non paged area
System service exception
Kmode exception not handled
 

A:keep getting blue screened and my computer reboots and I ca

Read other 7 answers
RELEVANCY SCORE 59.6

Hi, thanks for clicking!

Details:
Acer Aspire 8930 / Intel(R) Core(TM)2 Duo CPU T5800 / 2GHz / 4GB / 320GB / Vista Home Premium

My problem started when I booted my laptop to find it was sticking at the Microsoft Corporation loading bar, with HDD light blinking . After about half an hour of the constant 'loading', I forced shutdown and allowed it to cool for a while.

When I came back, I turned on as normal, the Acer screen appeared, then the Windows Error Recovery screen. It said 'Windows failed to start. A recent hardware or software change might be the cause'. It then gave two options to either Launch Startup Repair or Start Windows Normally.

I launched the Repair which then ran for about half an hour, saying 'Repairing disk errors. This might take over an hour to complete'. When it finished it offered diagnostics which said 'System volume on disk is corrupt'. I restarted thinking the problem would be solved, as it said all tests were executed successfully.

When I booted my laptop up, it once again showed the Startup Repair screen, so I chose to start Windows normally. This simply brought me back to the Microsoft Corporation screen/blinking HDD as in the first instance.

I allowed Startup Repair to run numerous times, however it always brought me back to the Microsoft loading screen.

I was initially able to boot the laptop in safe mode, however now when I try, it hangs on a drive named 'agvidsvx.sys'. I am now una... Read more

A:Startup Repair not repairing/Can't get past Microsoft Corp. loading screen

The hard drive may have failed. To confirm, test it with Seagate SeaTools for DOS (it doesn't have to be a Seagate drive).
You'll need a functioning PC with a CD burner to do the following:

1.Click "Downloads" on this page: http://www.seagate.com/support/downloads/seatools/ and download SeaTools for DOS.

2. Now install IMGBurn from here: http://filehippo.com/download_imgburn/

3. Use IMGBurn to create a CD from the SeaTools ISO file.

4. Now boot your faulty Aspire from that CD & SeaTools will eventually open. Select the hard drive to be tested and choose the long/extended test. A "Fail" at any point means the drive needs replacing.
 

Read other 2 answers
RELEVANCY SCORE 59.6

Hi, recently installed a new cpu motherboard and graphics card. Reinstalled windows, and now the machine is crashing occasionally. It crashes anywhere between instant on start up or 40 minutes into browsing. I uploaded the zip file per your BSOD posting instructions.

I've done a little researching on my own and I think it may have to do with the Realtek audio controller conflicting with my nvidia graphics card in some way. Although since the computer is blue screening I'm hoping your diagnoses might help me figure out if that is actually the problem.

*** STOP: 0x00000124

A:Computer blue screened, details inside.

Hiya and welcome to SevenForums!

Code:
BugCheck 124, {0, fffffa800a06b028, bf800000, 124}

Unable to load image \SystemRoot\system32\DRIVERS\cfosspeed6.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for cfosspeed6.sys
*** ERROR: Module load completed but symbols could not be loaded for cfosspeed6.sys
Probably caused by : hardware
Code:
MODULE_NAME: hardware

IMAGE_NAME: hardware

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE

BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE

Hmm, is your CPU compatible with your new motherboard? Remove Asus TurboLAN.

Read other 1 answers
RELEVANCY SCORE 59.6

A problem has been detected and windows has been shut down to prevent damage to your computer.
The problem seems to be caused by the following file: partmgr.sys

DRIVER_UNLOADED_WITHOUT_CANCELING_PENDING_OPERATIONS


If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new installtion, ask your hardware or software manufacturer for any other windows updates you might need.
If this problem continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advance Startup Options, and then select Safe Mode.

Etc etc..
Installing fresh windows onto laptop, gets to 73% when formating the hard drive then I get this blue screen, tried about 4-5 times. Using a Windows XP cd.
Its a Toshiba Satellite 1905-2301 laptop.
Worked ok before I tried this, just was running slow and laggy from spyware and virus's.

A:blue screened while formating hard drive

Did you fdisk the drive before attempting to install XP?

Read other 2 answers
RELEVANCY SCORE 59.6

Hi, I am running a laptop with nvidia optimus, using an intergrated card and a 310m geforce. I was using my computer as usual, when it blue screened on me, then rebooted. Afterwards, my resolution was messed up, and the computer no longer dectected the 310m! I have tried reinstalling some drivers, but they do not detect the card. I know the card is there, as I have used it previously.

Read other answers
RELEVANCY SCORE 59.6

A problem has been detected and windows has been shut down to prevent damage to your computer.
The problem seems to be caused by the following file: partmgr.sys

DRIVER_UNLOADED_WITHOUT_CANCELING_PENDING_OPERATIONS
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new installtion, ask your hardware or software manufacturer for any other windows updates you might need.
If this problem continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advance Startup Options, and then select Safe Mode.

Etc etc..
Installing fresh windows onto laptop, gets to 73% when formating the hard drive then I get this blue screen, tried about 4-5 times. Using a Windows XP cd.
Its a Toshiba Satellite 1905-2301 laptop.
Worked ok before I tried this, just was running slow and laggy from spyware and virus's.
 

A:blue screened while formating hard drive

Read other 11 answers
RELEVANCY SCORE 59.2

Windows 7, before 2012, everything fine for 2 years.., then after 2013, i looking at my pc, look not right, then crash, blue screen, thats first time for ages!...
then startup repair, i let them carry on but never stop, go on go on, for few days, i want stop them but how?

also i have trying Safe Mode for Windows 7 reinstalled with disc but failed install

my antivirus cant find any threats.

and sometimes this clock was wrong time and its UCT (not GMT)...everytime startup

Windows update going install for few mins but crash down and blue screen!

i have Disk Cleanup already all the time, sometimes its ok at the moment then crash down and blue screen.

this i trying windows 7 restalling disc...

this startup repair like this..

this windows update then crash down.

this after startup repair...to open as normal..pop up this everytime..

i just hope anyone help me please!

thankyou
 

A:blue screen, startup repair...

Read other 13 answers
RELEVANCY SCORE 59.2

For the second time in the last few months We've had a partial network outage that was traced to a blue screened machine. This time, the BSOD referenced storport.sys.  The issue being caused is that the switch gets flooded with unknown traffic and that
goes as far as the uplinked switch that gets taken down.
I can't find anything that stands out in a wireshark trace, but as soon as that machine is unplugged, everything is fixed.  What could possibly be causing this and how can it be prevented?

Read other answers
RELEVANCY SCORE 59.2

Here is the error code and the minidump. Thx

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: 833C6487
BCP3: AA01375C
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\091211-43056-01.dmp
C:\Users\terry\AppData\Local\Temp\WER-96720-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:BDOD upgraded towondows 7 and 2010 blue screened

  
Quote: Originally Posted by Amstel117


Here is the error code and the minidump. Thx

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: 833C6487
BCP3: AA01375C
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\091211-43056-01.dmp
C:\Users\terry\AppData\Local\Temp\WER-96720-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


These were caused by a memory exception. Please run these two tests to verify your memory and find which driver is causing the problem.
1-Memtest.

*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

RAM - Test with Memtest86+

2-Driver verifier






Quote:
I'd suggest that you first backup your data and ... Read more

Read other 1 answers
RELEVANCY SCORE 58.4

Hello everyone I'm new to the board and I apologize for not having the time to read through all of the beginning tutorials and scanning to see if this has already been addressed on the site. I've learned more about computers in the last eight hours then I could ever imagine. I have a Lenovo T420 running Windows 7 enterprise service pack two. My computer won't boot up in windows regular mode or safemode. I believe I deleted a registry file and that blue screened my computer. My computer has windows bit locker Drive encryption in which I am an administrator and have the key. I have until tomorrow to get my expense reports submitted for the last three weeks so that I can get reimbursed and my computer picked a doozy of a time to get a virus. Specifically the Mal/Iframe-AH that I thought was quarantined. I believe it is this virus that has: Redirected Google, mirrored other websites, taken over all Internet downloads from Firefox and Internet Explorer, told me Skitch needed an update, and I downloaded a SCARY version of Skitch, and fakes the virus protection scan when I ran it. I went into the registry and deleted a file that basically blue screened my computer. I'm at a point now where I can get to the command prompt however I believe the startup repair from bitlocker is overriding my boot up disk. I did change the boot order from advice from a Lenovo rep over the phone but I still haven't seen the start up menu for the Microsoft, I believe, system s... Read more

A:Blue screened because I deleted a registry file and a nasty virus.

Do you remember what file you deleted, which started the blue screening?

Read other 14 answers
RELEVANCY SCORE 58

On startup, it keeps going on the automatic repair with blue screen loop. The error message is "UNMOUNTABLE BOOT VOLUME" before the screen blacks out and goes to the blue screen.Did a hard reset.Pressed F2 for system extensive test.Did a Full Systems Extensive Test first but failed after a few seconds with this message:Battery Check: Primary - Replace (40)Failure ID: MC580C-795856-MFPV6K-C0BX03Product ID: J9M32UA#ABAPrimary BatterySystem Extensive FailedDid a few component tests after:Hard drive extensive test failed too.Hard Drive Short DST: failedFailure ID: MC580C-7AM856-MFPV6K-60X003Optimized DST check: failedLoading the Long DST check right now.I'm assuming my hard drive needs to be replaced, and battery?

A:Blue Screen Automatic Repair Loop during startup

Hard Drive Long DST: failedFailure ID: MC580C-7AM856-MFPV6K-61FQ03

Read other 1 answers
RELEVANCY SCORE 58

The whole story with this laptop. I once had a problem with the black screen of death when i was able to login. there was this empty black screen and no desktop. I was able to get through the black screen of death and the desktop was working. Problem was some of my drivers or registries were messed up. Bascially my laptop was never the same after the black screen of death. so i reinstall some of my drivers like access to internet, sound, and dvd-rw to get it running. some program still don't work today like window defender
After a random window update that restarted my dell laptop. This new problem started.
problem #1 blue screen of death
i did a post two months ago on this forum
http://forums.techguy.org/windows-vista/1002900-blue-screen-problem.html
i still hadn't even fix it. so it crash and reset often if i leave it alone or i do too many stuff

two months later
-so i deleted malwarebyte and was using driver verifer to figure out the problem from this site

http://answers.microsoft.com/en-us/...indows-7/5d885d9c-69b6-47a2-9905-e48b54a1a1fa

-while i was using driver verifer a new bsod came out c9

couldn't use window vista (normal mode) for a while like it restart over and over when it loading window vista. So i keep pressing random f buttons everytime it reset until I was able to use safe mode to system restore it.
the result is i have no minidump files on c9

Now i am a little worried if the next blue screen of death come out...I will have no idea ho... Read more

Read other answers
RELEVANCY SCORE 57.6

I was using my computer as usual and after I came back after eating, I saw a completely black screen. I turned my computer off and as it booted back up it blue screened, telling me there was a problem with memory management.
I turned it back off and fully depowered my motherboard, popped my ram in and out, just in case.
I turned it back on and nothing showed up on my monitor. My mouse and keyboard lit up and I got the regular system beeps. I plugged my HDMI cable into my motherboard with the same results. The cable works and the port on my monitor works as well.

A:Blue screened with message Memory Management, now no longer displays to monitor

Do you have another video card that you can try in the system?
If not, you may want to purchase one from a place that accepts returns (and gives you your money back) - in case you don't need it.

Read other 1 answers