Over 1 million tech questions and answers.

Help smart media card

Q: Help smart media card

went from me to xp. Now can't use my smart media card-won't install-need new drivers or new program??

Thx.

RELEVANCY SCORE 200
Preferred Solution: Help smart media card

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Help smart media card

check the card readers manufacturers site for a driver update.

Read other 1 answers
RELEVANCY SCORE 63.2

I am running XP on my computer and all of the sudden I am not able to send data/files to my smart media cards. The message I am getting says " File or directory cannot be created". This occurred suddenly and I've never had issues before. I can download files to my computer and move them around, my computer just wont let me send or copy to the media cards. the cards have plenty of available space and I am able to move files from the card to my hard drives and they are working correctly....
Please help this is a pain in the neck.
Thank You.
 

A:Smart Media card issue

Is it possible you've moved the tiny switch on the side of the card and write protected it?
 

Read other 2 answers
RELEVANCY SCORE 63.2

I was hunting some pictures and put my SM (Lexar) card into the card reader on my computer's tower to check for images. Finding none, I removed it and put it back in camera. Later, I went to take some pictures with the camera (Olympus D-370) and on the screen was a button "format" with a "cancel" button underneath that. I selected "cancel" and pressed the OK button and got the message "Card Error." The card was inserted correctly. I turned the camera off and then back on and got the same display. This time I chose "format" and pressed OK. Got the "card error" message again. I put the card back into my computer's card reader and it showed all the normal things it usually does.
Is my card bad or has the camera gone kaput? Batteries are fresh. Camera has been resting in its case; hasn't been dropped or anything. The card is normal in appearance and was handled properly.

Sally
 

A:Did Smart Media card die, or is it camera?

Read other 13 answers
RELEVANCY SCORE 62.4

hi, for the last few days i have been getting a Card Error on my Smart Media card (128M) when using it with my FujiFilm A201 camera.

it works ok in the Card reader i have. so i saved all the info, then Formatted (Fat 32 & Fat)
now it just say Card Error, quickly followed by Card not initialized.

the card is only a couple of months old and the contacts look clean and unscratched.

anyone know how to fix this issue?

cheers

chompie
 

A:SMart Media Card Error (plese help!)

What did you do different to get the error?

Format in the camera for best results
do you have access to another camera/reader to try it in?

buck
 

Read other 3 answers
RELEVANCY SCORE 62.4

Win xp 1.8ghz 512 ram
Where can I find problem preventing media card slot from working in computer?
Is there a driver for this?
Icon dissapeared
Supposed to be when I click Computer to view Devices With Removable Storage.

HELP
 

A:Smart Media Card Slot Not Working

Check the device manager for any conflictions.
 

Read other 1 answers
RELEVANCY SCORE 62.4

oddest thing on my smart media card ... I can take a dozen or two pix and go to my PC, place the card in my USB reader and veiw/scan all the pix except occasionally 1 picture. I can look at that pix on the camera view screen but if I attempt to access this file in ANY way - web preview, copy, move (even from a DOS prompt), or even a delete attempt from a higher level folder, etc the entire PC locks and I need to do a button reset on it. Luckily the pix has never been of such a great quality that I can't delete it from the camera. Now I know I can probably move it using the camera as the sending device but waht a pain. Also very strangely, I took pictures off the smart media card and placed them into a folder on the H/D and later wanted to put them back onto the card. The transfer went fine but I was unable to view at least 50% of the files on the camera. I wanted to take the media card to a Walmart and get them printed and perhaps another PC (the Walmart transfer unit) would read the card where the camera wouldn't but this was a concern. I ended up getting them printed via upload to a web site that does digital printing but this sure was a pain. I know about the 'format media' issues and this media card was bought seperately from the camera. Should I just format it again using the camera?
 

Read other answers
RELEVANCY SCORE 61.6

Purchased this card on eBay and it came without documentation or instructions. It seems that my notebook computer is recognizing it, but how do I view the smart media card contents?

Have an Epson photo printer (connected to my desktop) has a PCMCIA slot too, but it does NOT recognize the card.

Any suggestions would be appreciated.
 

A:PCMCIA smart media adapter card---how to view???

Well if you can't just go to explore and read it I would assume it needs software, ours does(usb). Can you post the make and model number, somebody should be able to find it.
 

Read other 1 answers
RELEVANCY SCORE 61.2

I still use smart media cards for transferring designs from my laptop to an embroidery machine, manufactured in 2005. It cost $4000 and comparable ones today cost $8000. I can't upgrade my equipment; my equipment is for imaging but it's not a camera. I hope I'm in the right blog.
So, here's my question: I bought a brand new reader/writer by a company called Microtech, which (I since learned) no longer exists. I got it brand new from Amazon just 3 weeks ago, and it came with an installation disk but the instructions only apply to Windows ME and earlier. I have the disk in my laptop, but I don't see any installation setup. Can I just go ahead and plug the device into my USB port? Is there a patch or something I should install first (to enable Windows 8 to read this disk)?
I'm not handy with computers. I use it mostly for embroidery and shopping.
 

A:reader/writer for older equipment (smart media card)

Windows 8 will most probably install the correct driver for you so just plug it in.
If for any reason windows does not install the driver there's no harm done the device won't work and we will have to think of something else.
 

Read other 12 answers
RELEVANCY SCORE 60.4

My camera dropped from the seat of the van. When i went to use it the camera said i needed to reformat the card. I took the card out and tried it again and it was fine. I took more pictures with no problems. When i went to download the pictures into the computer the computer wouldn't recognize the card and says it needs to be reformatted. The camera still shows the photos taken. How can i download the photos and then reformat the card so i won't have future problems.
i have an olympus c-4000 zoom. the smart media card is 32 mb PNY
 

A:smart media card reads on camera but computer does not recognize wants to reformat

It sounds like your useing the "software" to download the images.
Go out of software.......goto your "C" drive via windows explorer and look for the drive allocated for the camera goto the drive and open folder and drag images to another folder on C-drive.

JUST MY OPINON...............................
 

Read other 1 answers
RELEVANCY SCORE 48.4

i have done a lot of googling and i still don't understand what are they good for but i have a feeling they r some sort of old data storing devices like the floppy disks. anyway here is the picture of the smart card reader http://www.mega.pk/items_images/4962Dell_Latitude_E6420_496a.jpg its the long horizontal slot . i read a lot of confusing topics of people talking about smart cards of phones and cameras , im interested in knowing what the laptop smart card reader is good for , or the other thing the pcmcia ,
 

A:Solved: what the heck is the smart card and PCMCIA card slot

Read other 11 answers
RELEVANCY SCORE 47.6

I am trying to create a slideshow with music using HP Media Smart with a Windows 7 Home Premium OS. I have no problem creating the slideshow with captions but when I start to add music I get a message saying "Invalid Music File". The music files are in My Music and appear in the Library and are playable from either of those. Can anyone tell me what I'm doing wrong? I feel sure it must be operator error since this is the first time I've attempted this. I have made other slideshows where music was added automatically from Samples that came preloaded.

A:HP Media Smart

Please ignore previous message. As I typed it I realized if it played from Samples and not from Library it must be because it was different formats and it was and that solved the problem. Now, does anyone know how to just play snippets of songs?

Read other 1 answers
RELEVANCY SCORE 47.6

Trying to load from Smart Media and the response is I must reformat media. Doing so will wipe out data. Is there any way to save the data.
 

A:Smart Media

You can try this free: http://www.softdepia.com/business_finance/applications/pc_inspector_smart_recovery.html
 

Read other 1 answers
RELEVANCY SCORE 47.2

Ok, I got everything set up and the Red light is on. Now what do i do? How do I extact the pictures from the smartmedia USB Reader??

If i click on my computer, i can see the E drive (removable disk or something like that) i click on it and nothing? it gives a message it is not ready. Yes i have the smartmedia card in the USB Reader.

Even if i use my photoshop element program I can't aquire any images at all.. I looked in Programs and can't even find a Program call USB Reader so i can access it.

What do i do? help!! How do i extract images from the USB Reader! thank you!!
 

A:How do i use this Smart Media USB Reader

Read other 12 answers
RELEVANCY SCORE 47.2

Have a HP Pavilion dv7 less than 6 months old. Media Smart Photo program that comes with lap top would not open. Tried to uninstall and got Error The product definition file lost. The files deleted from program file but still shows in the programs and features and trying to reinstall gets same message. Do I need to get an eraser program for this one stubborn program? I have pro photo editing software.
Moeever

A:Media Smart Photo

I would get an eraser program like Revouninstaller regardless of your current issue. You will probably delete other progs during the life of the PC and it's good to get rid of the registry and file leftovers.

Read other 1 answers
RELEVANCY SCORE 47.2

i have vista home premium 32bit my hp media smart web cam not working and showing only ur integrated camera not turned on

A:my hp media smart web cam not working

Hi mgsugunan,

We can perform few troubleshooting steps to isolate the issue:

1. Click Start.
2. In search Type ?Device Manager?.
3. Press Enter.
4. Search for Imaging Devices.
5. Click ?+? sign beside Imaging Devices and check if Integrated Webcam is detected.
6. If no, it might be an issue with the Webcam.
7. It yes, re-install the driver for Webcam.

Please post the results.

Read other 1 answers
RELEVANCY SCORE 47.2

Hello, I had to format my PC recently and cannot fin the Smart Media software for my computer. Is there a link where i can download this software? Thanks!!!!

A:Hp Smart Media Software

Hi, What is your Hp All-In-One 200 ? Must be Hp All-In-One 200-something. Regards.

Read other 1 answers
RELEVANCY SCORE 47.2

I posted this over in HP's help forums but, frankly, I'm not expecting much. So, I thought I'd ask the experts here as well.

Recently I updated my MediaSmart software. Now, the "Live TV" icon is missing from the launch menu. The program is still available from elsewhere, just not from the MediaSmart launcher. Does anyone know how to add it back? Thanks in advance.

A:HP Media Smart Launcher

...I have version 3.1.1.12 of the MediaSmart menu installed however, the latest version available is 3.2.1.12. When I download and install the newer version, all the motions appear successful but, upon launch, I am still showing the 3.1.1.12 version. I tried uninstalling the older version and reinstalling to no avail. Any help would be greatly appreciated.

Read other 1 answers
RELEVANCY SCORE 47.2

Hi,  I am looking for recovery software for my hp media smart home server ex 490. anyone knowes where i can find it? Glenn

A:Hp media smart server ex 490

Hi, Glenn Did you ever get the Server Recovery software you were looking for? Tommy 

Read other 1 answers
RELEVANCY SCORE 47.2

Hi,

I am looking for a media player for Windows XP that can play as many file formats as possible. RealPlayer is just too slow and getting clumsier with each update. Is there anywhere a media player that is clean, fast, simple, and yes smart?

Would appreciate a good tip.

Thanks....

A:A Smart Media Player

Download VLC player. It plays all kinds of media files and does not require codecs to be installed.

Read other 6 answers
RELEVANCY SCORE 47.2

have a HP Pavilion dv5. I have been using the media smart photo just fine until two days ago. I do not know why but cannot open or access the program any more? Please help

Read other answers
RELEVANCY SCORE 47.2

I have a HP Pavilion ZV 6100 with 512 memory running XP Pro. It has a media card reader and accepts most cards. I inserted a Sony 1 gig camera card into the reader and it went into the reader and left no part of the card in which to remove it. This will not allow the computer to boot up normally and caused it to start in Safe Mode. How do I remove the card?

Thanks,
Cougarone
 

Read other answers
RELEVANCY SCORE 47.2

i have a few pics and video clips from my logitech 510

i read this thred but i don't have a card reader to use that rog.

http://forums.techguy.org/digital-p...inolta-dimage.html?highlight=recover+pictures
 

A:pls help me recover pics from my smart card card

Read other 13 answers
RELEVANCY SCORE 46.8

I've got a Rio500, MP3 player...and i just got a 64mb Smart Media card as an upgrade.....but it doesnt recognise the card Ive looked around on the internet...but no luck, i tried formatting the card already in there! And the specifications of the player allow for a 64mb card to be put in.

Any help would be greatly appreciated

Thanks
 

A:Rio500 Don't Recognise Smart Media

A review at http://www.atpm.com/5.12/rio500.shtml says it supports only 16 or 32M cards. I guess the official specs would be more precise, though. Have you tried another brand of memory?
 

Read other 3 answers
RELEVANCY SCORE 46.8

Does anyone have any experience using the HP Mediasmart software to access Netflix? I recently acquired a new HP laptop (Pavilion DM4-1160), and while I am happy with the system, it came preloaded with software from HP called 'MediaSmart'. I normally remove most of the bloatware when I purchase a new system, but I thought I'd look at MediaSmart before uninstalling. One of the features I liked was a '1-click' access to streaming Netflix. So, I tried it. It asked for my Netflix Email, and password. After entering it, the software responded with "invalid userid or password". I tried again thinking I might have a typo, but got the same response. So, I closed MediaSmart and navigated to Netflix in Firefox. I entered my Email and password and got in. So, back to MediaSmart one more time and again, got the "Invalid userid..." message.

I posted on the HP forums, and got no response, so thought I'd try here. If you have used MediaSmart for watching streaming Netflix please respond. Otherwise, guess I'll just remove it and use my browser.
 

Read other answers
RELEVANCY SCORE 46.8

I am running Windows 98se. Motherboard is an Asus A7V266-E with a AMD Athlon 1.3 processor. Via KT 266A chipset. After I install software for Zio and plug it into usb, I get the new hardware found message. When it gets to eusb MSD adapter software installation, it freezes my computer and I have to shut down manually. I have downloaded some other drivers but nothing seems to work. Any help would be greatly appreciated.
Thanks, Bill
 

Read other answers
RELEVANCY SCORE 46.8

I've never dealt with sharing via media server on Windows 8 so please excuse me if this question has an easy fix that I'm overlooking.
I'm trying to view the videos from my PC library on my Vizio smart TV.
When I look at the TV, I see the device under the DLNA1 category. I also see folders: Music, Video, Photo. Each of those has subfolders as well but I can't find any of my actual files...
Where on my computer do they need to be present in order for them to show up on the TV?
 

A:New to Media Servers - Connecting to Smart TV

sometimes you need to choose the type of file - Music, Video etc to get them to be seen

you are probably using windows media server - check its set to sharing
http://topnettricks.com/windows-8-dlna-media-server/
 

Read other 2 answers
RELEVANCY SCORE 46

Hi: I wanted to know if "smart media" and "compact flash" were one in the same. I'm considering purchasing a Creative Labs Nomad II MP3 player and it uses smart media cards (32 and 64 MB available). I've seen PCMCIA adapters for compact flash that basically let you read compact flash in a PCMCIA slot, and was wondering if this would work with the smart media (the PCMCIA adapter is made by SANDISK, and can be seen here http://page.auctions.yahoo.com/auction/27112621
Thank you!
 

A:Compact Flash & Smart Media Cards

No they are not the same at all.That card will not work the size is different. Check out these prices on smart media. I have bought from them several times. http://www.mobshop.com/browse?category_id=815

There are lots of different card readers out on the market. check Buy comp they have lots.

------------------
http://www.adcritic.com/content/smart-beep-first-date.html
only if you have the pipeline
 

Read other 1 answers
RELEVANCY SCORE 46

Hi, I have recently upgraded my Vista O.S. to Windows 7, 64 bit professional on my HP Pavalion PC at home. I tried to re-install my HP media Smart Server model name 490/495 on the new windows 7 professional using the Software Installation Disks Version 1.1 that came with the Media Smart Server (copyright 2007), however I got this error message: "You cannot install HP Media Smart Server on this version of windows". Please note that I have a wireless LAN at home, and I have connected the media smart server through an ethernet cable to the PC.  I then connected the media smart server by ethernet cable to the wireless modem, and again tried to install the media smart server using the on line sources. This time I was successfull in installing the home server partially, as when it was trying to install the Home Server connector I got the following messages: "Joining windows Home server" OK"Configuring Computer back up" failedthen it asked me to go back or cancel. I tried going back several times but it stopped with the same error message"Configuring Computer back up" failed. So I canceled. Now I can only read from the media Smart Server, but I do not have any other controls such as editing, etc.

Read other answers
RELEVANCY SCORE 46

When I got wireless internet service a week ago I asked the technician about streaming you tube and internet tv programs to my television set. He told me that my tv is not a smart tv He said that I would have to buy a streaming media player.
I have a Samsung HD tv. Can I hook a media player to the router and accomplish this? If not, how would I do it
Thanks for any help that you can give me.
 

A:Solved: Streaming Media Player and Not so Smart TV

Read other 13 answers
RELEVANCY SCORE 46

My daughter was trying to convert some media files and downloaded a free program called Smart Media Converter. The download contained three other programs that I can tell. VisualBee, W3i Net Assist, & Graboid Video. I used Hitman Pro, malwarebytes, & super Antivirus. All three fround multiple files to remove. I went to the control panel and tried to remove all three but couldn't. I get a message that says an error occurred and that the program may have already been removed. I loaded reimage repair and ran it. The results said it found several files but wanted payment to remove them. Id did not remove them. Computer is running slow and acting strange.
 
Computer info:
Lenovo Win7 PC
AMD E-450 APU with Radeon9tm) HD Graphics 1.65 ghz
4.00 GB (3.60 GB usable)
64 - bit
Windows 7 Home Premium
Service Pack 1

A:Smart Media Converter Installed Malware

Download Security Check from here or here and save it to your Desktop. Double-click SecurityCheck.exe Follow the onscreen instructions inside of the black box. A Notepad document should open automatically called checkup.txt; please post the contents of that document.NOTE 1. If one of your security applications (e.g., third-party firewall) requests permission to allow DIG.EXE access the Internet, allow it to do so.NOTE 2 SecurityCheck may produce some false warning(s), so leave the results reading to me. Please download Farbar Service Scanner (FSS) and run it on the computer with the issue.Make sure the following options are checked:
Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdateWindows DefenderOther ServicesPress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply. Please download MiniToolBox and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Devices (do NOT change any settings here)List Users, Partitions and Memory sizeList Restore PointsClick Go and post the result. Please download Malwarebytes Anti-Malware to your desktop.NOTE. If you already have MBAM 2.0 installed scroll down.Double-click mbam-setup-2.0.0.1000.exe and follow the prompts to install the program.
At the end, be sure a checkmark is placed next to t... Read more

Read other 18 answers
RELEVANCY SCORE 46

I am trying to uninstall Media Smart from my 64 bit HPE-570t computer that has been upgraded to Windows 10.  I tried to load the "fix" for the uninstall error but it won't load Media Smart because I am no longer running the required operating system.  When I try to uninstall one of the components, I get a message that states there is a second copy of the same component installed and asks do I want to also uninstall that as well.  I confirm yes and then the following error is received. Error: The product definition file is lost. Is there a way to either reload Media Smart on Windows 10 so it can then be correctly uninstalled or is there another way to uninstall it under Windows 10.  Using 3rd party removal tools has resulted in the same error.

Read other answers
RELEVANCY SCORE 46

Hi, I have recently upgraded my Vista O.S. to Windows 7, 64 bit professional on my HP Pavalion PC at home. I tried to re-install my HP media Smart Server model name 490/495 on the new windows 7 professional using the Software Installation Disks Version 1.1 that came with the Media Smart Server (copyright 2007), however I got this error message: "You cannot install HP Media Smart Server on this version of windows". Please note that I have a wireless LAN at home, and I have connected the media smart server through an ethernet cable to the PC.  I then connected the media smart server by ethernet cable to the wireless modem, and again tried to install the media smart server using the on line sources. This time I was successfull in installing the home server partially, as when it was trying to install the Home Server connector I got the following messages: "Joining windows Home server" OK"Configuring Computer back up" failedthen it asked me to go back or cancel. I tried going back several times but it stopped with the same error message"Configuring Computer back up" failed. So I canceled. Now I can only read from the media Smart Server, but I do not have any other controls such as editing, etc.

Read other answers
RELEVANCY SCORE 45.6

Media Smart program for making a music CD is not working- I load the music to the list for burning, then try to burn and get a "windows closing program- Media smart not working" message and that's it. This program used to work fine, made many music CD's - now it won't even run...help. Can I re-install this HP program to correct this issue?? 

A:Media Smart for music CD will not run properly- Windows shut...

Hi, Did uou upgrade/downgrade your machine ? Re-install it may not help because it is not compatible with Windows 10 but you can always try (to re-install it). Please try the following software called  CyberLink Power2Go  for HP computers     ftp://ftp.hp.com/pub/softpaq/sp78001-78500/sp78217.exe and its manual     http://download.cyberlink.com/ftpdload/user_guide/power2go/6/ENU/Power2GO_UG.pdf Regards.  

Read other 1 answers
RELEVANCY SCORE 45.6

Hi, I have recently upgraded my Vista O.S. to Windows 7, 64 bit professional on my HP Pavalion PC at home. I tried to re-install my HP media Smart Server model name 490/495 on the new windows 7 professional using the Software Installation Disks Version 1.1 that came with the Media Smart Server (copyright 2007), however I got this error message: "You cannot install HP Media Smart Server on this version of windows".  Please note that I have a wireless LAN at home, and I have connected the media smart server through an ethernet cable to the PC.  I then connected the media smart server by ethernet cable to the wireless modem, and again tried to install the media smart server using the on line sources. This time I was successfull in installing the home server partially, as when it was trying to install the Home Server connector I got the following messages: "Joining windows Home server" OK"Configuring Computer back up" failedthen it asked me to go back or cancel. I tried going back several times but it stopped with the same error message"Configuring Computer back up" failed. So I canceled. Now I can only read from the media Smart Server, but I do not have any other controls such as editing, etc.  

Read other answers
RELEVANCY SCORE 45.6

How can I install HP media Smart Server on Windows 7 professional?

Read other answers
RELEVANCY SCORE 45.2

Thought it would be cool to do, since some software allows you to encrypt data and use a smart card to unlock data. Tried finding out if it was possible to turn an SD card into a smart card, but couldn't find anything. That makes me think there isn't a way, but thought I would ask anyways. Seems like there would be some software to do this, but I didn't find anything.
 

A:Turn SD Card Into Smart Card

Hiya Football101
Looks like you have a new project on your hands. LOL
Try this site...
www.safehousesoftware.com/Manual/User_s_Guide/How_to_Create_a_Virtual_Smartcard.htm
Good luck
 

Read other 1 answers
RELEVANCY SCORE 45.2

The quest:
 
view audio files on Smart TV.
 
Installed Samsung Link on Vista Home Premium machine.  no luck.  then noticed that the TV would no longer see the vista machine ( i could navigate from the TV to the vista machine prior to install) I also have another generice media player in another room that also cannot now see the vista machine.
 
attempts to fix:
uninstalled Samsung link
unistall another related program "Plex"
system restore (it reported failure to restore indicating restore file was damaged)
 
checked network sharing and Network was Public, changed that back to private
all sharing settings  are checked correctly for normal sharing  - Network Discovery on, File sharing on, Printer sharing on. public folder sharing on, pasword protected sharing om, media sharing on
network and sharing center extremely slow to open
when i click diagnose and repair in the network and sharing center i get "Windows has confirmed that this computer is currently experiencing a network connectivity problem"  The problem cannot be repaired automatically.  I have researched this and tried the recommendations with no luck.
 
Internet acces is working perfectly.
 
I have updated and run Malwarebytes to make sure no virus - clean
Also have Avast running with no issues.
 
I can ping TV and Gerenic media player but those devices cannot see/login to the vista machine anymore.
 
I have have this happen before and i think it w... Read more

A:Vista networking / Samsung smart tv / another generic media player

Hello --- I run PLEX media server for my home theater, etc. I have the Internet access mixed problems when I have had more than one device reboot at the same time eg. Desktop, laptop, Roku ,etc. my network dhcp is on and somehow the PLEX server (Vista) doesn't flush the IP it had out and grab a new one on reboot. I get message about connectivity but cannot see other devices in my home network but I can get on the Internet. I am unable to do a refresh or release on the network even from a command line. The only solution I have tried that works for me is to go into device manager, uninstall my network card for the cable connection (this machine is not wireless enabled), reboot this system so that it reinstalls the card and it will grab a new IP when it connects.
hope this at least gives you something to think about. Keep in mind that what works for me may not work for you and I cannot guarantee that this will fix your problem.

Read other 1 answers
RELEVANCY SCORE 45.2

vorrei che mi fosse installato il programma media smart che avevo sul precedente pc - ed era fantastico - se possibile fatemi sapere ---

Read other answers
RELEVANCY SCORE 44.8

Hi, i found in my smartcard slot an device who has an gradation, can you say if on this device i can put a analogycal  thermometer who has been show me the CPU temperature? I have an Dell Latitude e5430! Thanks! 

Read other answers
RELEVANCY SCORE 44.8

A person has changed settings in password policies like "prompt password expire in 14 days" in Administrator tool. When i try to log in it does not accept the password and gives me the message " unable to log you on because it is required that you use a smart card to log on, please contact your administrator". I don't know what what i changed made. I can't entered from Admin account as well. How do I undo this change?
 

Read other answers
RELEVANCY SCORE 44.8

I'm having great difficulty finding a smart card for my Toshiba A205. It's the one shapped like an "L" sort of and there just isn't a listing anywhere. Any suggestions ??? Thank You in advance.

A:Smart Card

Hi -

What is the exact model of your system.... A205-xxxxx ?

See p 133 of this Satellite A205-S4537 "users guide" --> http://cdgenp01.csd.toshiba.com/cont...vB_07Feb26.pdf

I am not familiar with the "L-shaped" card you speak of. Where did you obtain the one you have? Can you take a picture of it & attach to post?

Regards. . .

jcgriff2

.

Read other 1 answers
RELEVANCY SCORE 44.8

Ok I have found another problem. I had my computer worked on and he re-installed windows xp. Before it was worked on I was able to insert my memory card from my digital camera ( I don't have the plug for the camera to upload pictures that way) and Nero always popped up. I think it was drive E. Now nothing is happening when I insert the memory card. I am able to use my external hard drive and it comes up as drive E. I believe my laptop has a built in smart card, but it is not showing.

A:Smart card

I believe you may have to reinstall the drivers.

First look in Device Manager with your camera plugged in
and see if there are any yellow exclamation symbols there.

May only be necessary to uninstall and reboot.

I have to log off now, hope someone else can help if OP replies.

Read other 1 answers
RELEVANCY SCORE 44.4

when we want to update,install,uninstall an app a short menu appear it ask to connect the smart card 

Read other answers
RELEVANCY SCORE 44.4

This isn't really a driver issue but more of a some help with local policy / permissions (I think).

I have just put a new Windows 7 PC on our domain and I am having a few troubles getting the Gemalto Smart card to work as a user. This card has the Gemplus esigner which lets us authenticate to connect back to our bank for secure banking.

Basically this PC is in a domain which locks the desktop and programs down so a user cannot access Programs etc. We then place an RDP icon in the start menu and they access their programs via RDP into a terminal server. Only a few programs are run locally on the PC.

When we install the Gemalto software on an XP machine we set permissions on the installation folder for everyone to have read / write access along with the registry key and this works fine an allows users to be able to use this on the local PC.

With Win7 I have tried this but I keep getting "Cannot fine the certificate store" error ? however this works as administrator (local PC) which leads me to a permissions thing or a domain setting.

I can insert the smart card and manually import the certificate which reports sucessfull yet the same error occurs.

Has anyone else has this issue or can anyone point me in the right direction?
Cheers

A:Gemalto Smart Card

Your issue may be a product of a feature called UAC (User Account Control) settings. They can be adjusted locally in the control panel under user accounts. However in a domain environment the UAC settings may be dictated by a Group Policy setting. Something perhaps to try would be to have the domain administrator log on to the Win 7 machine with his credentials and see if you still have the problem with the Certifcate, if that's successful than he will probably know how to fix it on the local machine. Not sure this will help, but I thought I would throw it out there and perhaps someone else may have another idea.

Read other 5 answers
RELEVANCY SCORE 44.4

My laptop has the smart card error i sent to hp they sent it back not fixed how do i restore it

A:smart card error

andrewgrif789 Sorry, but this is just a community self-help forum staffed by volunteers.  We have nothing to do with HP Tech Support or the work done by HP Service Centers. You will need to contact HP Customer Support directly to speak with them about this problem. If you live in the US or Canada, contact information is on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1If you live elsewhere, contact information is on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.htmlNOTE: After you get through, stay on the line until you are finally able to talk to some one -- it can take a while! Good Luck========================================================================I am a volunteer and I do not work for, nor do I represent, HP.---------------------------------------------------------------If my posts helped you, please click the Thumbs-Up symbol on my post to say thanks.If my posts solved your problem please click "Accept As Solution".========================================================================

Read other 1 answers
RELEVANCY SCORE 44.4

I think this is somewhat a studpid question.Does my ThinkPad T450 have a smart card reader? It looks like this: http://www3.pcmag.com/media/images/467768-lenovo-thinkpad-t450s.jpg?thumb=yAnd I don't know how to find out.

A:Do I have smart card reader?

Hi,
 
Go to SUPPORT (above) and enter your MT-M (like 20BW-Z0CJUS as an example) but without spaces or hyphens in the search box.  It should give a list of features in "machine info".
 
Alternatively enter your MT-M here:  Parts Lookup for a very detailed bill of materials.
 
Z.

Read other 1 answers