Over 1 million tech questions and answers.

Another BSOD (with dump files)

Q: Another BSOD (with dump files)

Hello - If anyone could take 5 minutes to help me I'd really appreciate it.

I have attached the last 5 memory dumps - the blue screen info was as follows

SYSTEM_SERVICE_EXCEPTION

*** STOP: 0x0000003B (0x00000000C0000005) (0xFFFFF9600094 964)
(0xFFFFF8800A5A30B0) (0x000000000000)

*** win32k.sys - ADDRESS FFFFF96000094 964 base at FFFFF 96000020000

Datest amp 4d6f11c9

I've done the usual .. updated drivers (Driverscanner) ran malwarebytes, chk disk, spybot, defragged, checked registry (RegCure) etc but it crashed probably twice a day.

Thanks in advance if you can help. Dave
(ps - I'm a bit of a noob, so be gentle)

RELEVANCY SCORE 200
Preferred Solution: Another BSOD (with dump files)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Another BSOD (with dump files)

also not sure if this might shed any light.

Read other 4 answers
RELEVANCY SCORE 66

I've been having BSoD's for well over a year now, once or twice almost every day. I've tried multiple times to figure out whats wrong but... I dont have ANY dump files.

I've followed instructions on how to enable them but it still doesn't create a file. Im really hoping you all can help me out here.

The current settings are:
Page files on both hard drives enabled.
Set custom page size to 17000MB-20000MB
System managed size and no paging file boxes are unchecked
Write an event to system log box checked
Automatically restart unchecked
Debug information set to small memory dump/kernal. Both settings dont work
Overwrite existing file box is greyed out when debug is set to small memory. Checked when set to kernal
Small and kernal memory dump location set to C:\Windows\Minidump and C:\Windows\Memory.DMP I created these folders as they were not present

I got a SSD awhile back and use it for my windows. However i didnt reformat my other hard drive and windows is still installed on the old one however i boot from the SSD (maybe this is some how the problem)

Im using WhoCrashed from Resplendence Software - Advanced System Tools and Developer Components to force a BSoD when trying to creat a dump file.

There are NO files in either folder. Both on the SSD or old hard drive.

I've searched many forums now and found others with what seems to be the same problem but with no solutions. I would VERY much appreciate the help!
The BSoD's seem to mostly happen when play... Read more

A:No dump file after BSoD. Dump files ARE enabled

Wrote stuff that was wrong. Ignore this reply

Read other 9 answers
RELEVANCY SCORE 57.6

I have been getting BSOD a few times with the error irqs not less or equal blue screen the past couple days. Any help would be appreciated!

A:BSOD With Dump Files

  
Quote: Originally Posted by lasthonor


I have been getting BSOD a few times with the error irqs not less or equal blue screen the past couple days. Any help would be appreciated!



These were caused by your network driver. The intel wifi driver needs to be re-installed with a fresh copy. Go to the mfr and download and install it.

Ken


Code:
BugCheck A, {0, 2, 0, fffff800031f7477}
Probably caused by : NETw5s64.sys ( NETw5s64+b76b )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck A, {0, 2, 0, fffff80002c0c477}
Probably caused by : NETw5s64.sys ( NETw5s64+b76b )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck A, {0, 2, 0, fffff800031e9477}
Probably caused by : NETw5s64.sys ( NETw5s64+b76b )
??????????????????????????????????????????????????????????????????????????????????????
BugCheck 9F, {3, fffffa8004b04940, fffff80000b9c4d8, fffffa8005217a40}
Probably caused by : NETw5s64.sys

Read other 2 answers
RELEVANCY SCORE 57.6

ARGH!! Win7 sometimes makes me feel like such a NOOB! I've read and re-read every post in the How to. Unfortunately many of the writers are not referencing Win7. Links go to XP references. File locations sound more like XP than even Vista and certainly not Win7. Control panel references for enabling dumps do not correlate to any Win7 views.

I've run SF Diagnostic Tool v2.02 and it finds 0 files.

I have been having a number of hangs and BSOD's and need to go beyond the event logs to figure out the cause.

A:No BSOD dump files

Do you have a minidump folder... if not, create one... c:/windows/minidump

Read other 9 answers
RELEVANCY SCORE 57.6

I only have Windows 7 in my pc and without problems but since a few days ago, sometimes appears a BSOD that says:
Kernel_Data_Inpage_Error

Technical Information
***Stop: 0X0000007A (0XC05074E0, 0XC0000056, 0X6915EBE0, 0XA0E9C00)

Physical memory dump failed with status 0XC0000010

I know that the information which the dump file contain will help but i dont know where the dump file is located

A:BSOD - Dump Files

Many have simply reinstalled Vista when seeing the "Physical memory dump failed with status 0XC0000010" error repeatedly without any memory dumps being seen. Your next step would be looking in the event viewer logs which can sometimes point to a company name.

For the "Stop: 0X0000007A" error the MS information on that goes back as far as Windows 2000.

"This issue can occur if you have the UlraDMA66/ATA66 (80 wire/40 pin) IDE cable attached to the drive that you are trying to install Windows 2000 on. Windows 2000 does not fully support the UltraDMA66 controller."
Error Message "Stop 0x0000007A" Occurs During Setup on an ATA66-based Computer

An updated version of the same problem seen with Windows Server 2008 and Vista is found at Stop error message when you put a computer that is running Windows Vista or Windows Server 2008 into hibernation: "STOP 0x000000A0," "STOP 0x0000007a," or "STOP 0x00000077"

You'll find a link for a hotfix at the top of the page there that might help with 7. But still look the event viewer logs over to see what other information is shown there.

Read other 9 answers
RELEVANCY SCORE 57.6

here is a link of the archived minidump folder (i tried attached but it said invalid file)
storage.to - Download
i get this bsod's at random i could say..could any of you guys help me figure out what the problem is?

i have the x64-bit version of win7..on a laptop msi gx623

A:bsod dump files

  
Quote: Originally Posted by gigimasinuta


here is a link of the archived minidump folder (i tried attached but it said invalid file)
storage.to - Download
i get this bsod's at random i could say..could any of you guys help me figure out what the problem is?

i have the x64-bit version of win7..on a laptop msi gx623


Please ZIP up the minidump folder contents and upload the zip archive here. That other site makes it hard work to get to your RAR.

Read other 9 answers
RELEVANCY SCORE 57.6

Here is what I have. Lenova A63 Desktop with Windows 7 Pro 32bit, about 1 yr old. AMD Athlon II X2 processor, original OEM OS with no re-installs. Bluescreen comes up and goes away all by itself and then OS restarts. I know i don't have an antivirus installed as I just removed AVG today as I thought it was creating a seperate problem unrelated. Planning to re-install asap.
Thanks in advance
Shawn

A:BSOD dump files help

First off, I would just install microsoft security essentials to replace the loss of AVG, it's not the greatest thing but it is stable in win 7.

Give me a little time and I'll edit this post with the dump info.

edit: it seems the acronis disk filter driver is interfering with activity. I'm still running debug on the two most recent dump files though.


Code:
NTFS_FILE_SYSTEM (24)
If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
parameters are the exception record and context record. Do a .cxr
on the 3rd parameter and then kb to obtain a more informative stack
trace.
Arguments:
Arg1: 001904fb
Arg2: 96a83788
Arg3: 96a83360
Arg4: 8b0fa20f

Debugging Details:
------------------

*** WARNING: Unable to verify timestamp for tdrpm273.sys
FAULTING_MODULE: 82051000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 0

EXCEPTION_RECORD: 96a83788 -- (.exr 0xffffffff96a83788)
ExceptionAddress: 8b0fa20f (Ntfs!TxfShutdownRm+0x000001e9)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 00000000
Parameter[1]: 326a8b04
Attempt to read from address 326a8b04

CONTEXT: 96a83360 -- (.cxr 0xffffffff96a83360)
eax=8b056820 ebx=00000000 ecx=8b0c1d4a edx=8fb041ec esi=8fb04000 edi=8fb04060
eip=8b0fa20f esp=96a83850 ebp=96a838d0 iopl=0 nv up ei pl zr na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010246
Ntfs!TxfShutdownRm+0x1e9:
8b0fa20f a1048b6a32 mov eax,dword ptr ds:[... Read more

Read other 6 answers
RELEVANCY SCORE 57.6

Recently purchased the following laptop:

Acer Aspire 5542-5462

AMD Turion II M500 2.2ghz
4GB DDR2
500GB SATA
Windows7 Home Premium

Pulled it out of the box Friday, plugged in the power cord and started it up. Went through initial setup in ~30min. Loaded Win7 for first time and began setting things up. All of a sudden I get BSOD. I didn't notice what the first one was for but every time I restarted it'd run for a few minutes then BSOD, usually for a different reason every time. Called Acer tech and they had me do a full system restore from boot.......long story short it didn't help at all. I've since borrowed a know clean Win7 disc from a friend and completely reinstalled on fresh partition. It ran great for the first hour or so but reverted back to BSOD's every 5 min. BSOD seems to happen while doing some kind of activity like web browsing or file browsing. Hasn't happened with computer just sitting idle.

Approximate BSOD titles:

15% of time: irq not less or equal
25% of time: win32k.sys
60% of time: memory_management, or fltmgr.exe, others unnamed, or I didn't catch in time.

I attached a .zip of the memory dumps so far.

I appreciate any help on this. Hate to have to revert to Win7 32bit and only use 3gb of ram.

A:BSOD with dump files

Oh, add that I have used Window memory error check utility and let it make 2 full sweeps and it found no errors.

Read other 7 answers
RELEVANCY SCORE 57.6

hello,
i get bsod's all the time, ive added the dump files.
please help me.

A:need help with bsod and dump files

Hello,
Start by updating these 3 old drivers,





Quote:
lmimirr.sys Wed Apr 11 10:32:45 2007
RemotelyAnywhere/Logmein Hamachi

LMIRfsDriver.sys Tue Jul 15 04:26:56 2008
See Above

RaInfo.sys Sat Jan 05 07:57:14 2008
See Above


Regards...

On your next post, PLEASE post your system specs.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 19, {21, fffff8a003215000, 2770, 8a19582fc3acb9de}

Unable to load image \SystemRoot\system32\drivers\spsys.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for spsys.sys
*** ERROR: Module load completed but symbols could not be loaded for spsys.sys
Probably caused by : spsys.sys ( spsys+28d50 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************... Read more

Read other 3 answers
RELEVANCY SCORE 57.6

Hi there,

I have been getting random BSOD particularly when playing videos. I have tried updating videocard drivers but this has not solved the problem.

I have windows 7 x86 (32bit) Full retail, (upgraded from windows xp) installed a few months ago.The system is 4 years old.

Any help much appreciated.

Thanks

Simon

A:BSOD and dump files

Welcome to SF, coolsi.

First please update your System Specs.

HOW TO FILL OUT YOUR SYSTEM SPECS

In the line at the top of “www.SevenForums.com” you will see UserCP.
That is an abbreviation for User Control Panel.
Click on UserCP.
In the left-hand column, under Your Profile you will see Edit System Spec.
Click on Edit System Spec
You can copy and paste from the output of Speccy, http://www.piriform/com/speccy to fill out much of the info. Be sure to use the Other Info section of your System Specs for such info as your optical drive, your wireless adapter, your speakers, etc.


Your NVidia NForce Network Controller is old. Please update.
Driver c:\windows\system32\drivers\nvm62x32.sys (1.0.1.210, 339.13 KB (347,264 bytes), 10/06/2009 22:18)

I'm looking at the log now for further information.

** EDIT **

Memory corruption was also reported. After completing the steps above,

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.

Read other 2 answers
RELEVANCY SCORE 56.8

Hi. I'm experiencing BSOD problem for quite a long time. I really don't know anymore what could be the cause of this problem and i desperately need help about it. I don't know much about this, but I've been told to upload memory dump file so that experts may determent what is the cause of my problem. But that is where another problem is. I'm not getting any new memory dump files after my PC crashes. It just stopped ''appearing''. I did everything this site suggested to enable mini dumps:


Set MiniDump


What should i do? Please help me. (I have SF files attached, take a look i hope that helps...)

A:No memory dump files after BSOD

Code:
The following boot-start or system-start driver(s) failed to load:
AFD
Avgdiska
AVGIDSDriver
Avgldx64
Avgtdia
CSC
DfsC
discache
NetBIOS
NetBT
nsiproxy
Psched
rdbss
spldr
tdx
Wanarpv6
WfpLwf
Uninstall AVG using AVG Remover. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
And test you HDD using HGST WinDFT. Let us know the result.

Now let us know if the BSODs are continuing or not. If it continues, take a camera snap of the BSOD screen and upload it here.

Read other 7 answers
RELEVANCY SCORE 56.8

Hello All,

Was wondering if someone could help analyze my dump files to see if there's a way to correct my BSOD issue.
Attached is the dump files. Thanks for any help!

A:BSOD Dump Files to Analyze

Hi CaddyQuinn ^_^,

I have analyzed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Fri Aug 22 01:37:58.628 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for atikmdag.sys

*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys

Probably caused by : hardware ( nt!KiInterruptDispatch+13b )

BugCheck A, {5200000000, b, 0, fffff8012457057b}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)

BUGCHECK_STR: AV

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: IP_MISALIGNED

MaxSpeed: 3000

CurrentSpeed: 2993

BIOS Version A08

BIOS Release Date 04/16/2014

Manufacturer Dell Inc.

Product Name XPS 8700

??????????????????????????????????????????????????????????????????????????????????????``


Below is a list of 3rd party drivers present on your system :-

Code:
**************************Fri Aug 22 01:37:58.628 2014 (UTC + 5:30)**************************
lvbflt64.sys Tue Oct 23 07:40:38 2012 (5085FC9E)
lvrs64.sys Tue Oct 23 07:41:24 2012 (5085FCCC)
lvuvc64.sys Tue Oct 23 07:42:08 2012 (5085FCF8)
athw8x.sys Thu Jan 17 14:45:39 2013 (50F7C13B)
Rt630x64.sys Fri May 10 15:29:08 2013 (518CC4EC)
intelppm.sys Thu Aug 22 14:16:35 20... Read more

Read other 37 answers
RELEVANCY SCORE 56.8

Maybe a year or a year and a half ago, my computer would randomly crash and restart on me with no real correlation to any program. It only happened every other month or every two months, so I figured it was just a weird fluke. Perhaps the computer wanted to take a nap? (A couple of the crashes happened over night) Anyway, I didn't really think anything of it because it was stable most of the time.

Now, things are quite different. Sometimes it crashes multiple times in one day, but still always at random times. Once when I started burning a DVD, once when I closed a video game, just whenever it felt like it. When it started getting annoying, I decided to finally take action. I figured out how to stop it from immediately restarting so I could have a chance to read the BSOD, and I found the culprit. IRQL_NOT_LESS_OR_EQUAL

A few google searches led me to believe that this is caused by a faulty driver or faulty memory. I didn't really know how to test the drivers, so I updated them the best I could, then focused on testing the memory. I've had problems with it before, like not able to run at it's listed timings without errors, so I dialed them back. I ran trusty MemTest 86+ for the night only to find no errors in the morning. Stumped, I decided to punt the problem off for another day. Of course, the crashes kept happening, and for the longest while, it was the same not less or equal error.

Then I got another error, PFN_LIST_CORRUPT. Google searches again poi... Read more

A:Many BSOD, Dump files galore

Read other 9 answers
RELEVANCY SCORE 56.8

Hi everyone.
I've been getting a BSOD for a few days, and I don't know why.
And now it's gotten to the point where as soon as Windows finishes loading, it crashes immediately.
The install of XP is pretty fresh, and there are no malicious programs, trojans, viruses, or spyware.
The laptop runs fine in safe mode without any freezing or crashing.
I have run memtest for a while, and no errors come up.
I tried running hard drive test, but since my laptop needs to load special drivers from a floppy disk, I couldn't run a complete drive test.

Here is the BSOD error message:

0x0000008E (0xC0000005, 0x80610305, 0xA5FBD9DC, 0x.....)
I can't read the rest because the computer auto-restarts too quickly.

Here are my laptop specs (Laptop is over 3 years old - running hard almost everyday):

Sager 9880
Pentium 4 3.0 GHz
512MB PC2-4200/200P RAM
100GB Seagate ATA 2.5" HD
ATI X800 Mobility Radeon - 256MB/PCIxpress (Removable)

I have included the most recent minidump files.
Can anyone please help me to figure out what is wrong?

A:BSOD - Dump files included - Help please

Hello jbondsr


1. This very often is a RAM problem. If you have more than one stick of RAM (256MB or more) swap them over or take one out and try again with only stick #1. If it does not help or makes things worse swap the sticks and try again with only stick #2. This will identify if you have a bad stick.

2. It could also be a driver issue.The fact that the machine is OK in Safe Mode points to this .
Turn off automatic rebooting (you can do this in Safe Mode)
Right-click My Computer / Properties / Advanced / Startup and Recovery/Settings.
Under System Failure, uncheck the Automatically restart check box
Apply/OK

Reboot into normal mode
You will then get a BSOD with error message which will help identify the problem. You will now be able to read all the STOP message. Look if there is a driver mentioned "*****.sys" and post back

Read other 2 answers
RELEVANCY SCORE 56.8

from past 1 month this bsod has started again.. don't know why..
plz help

A:BSOD....dump files attached

Pretty simple, AVG appears to be causing it. Please remove it with this tool: http://download.avg.com/filedir/util...avgremover.exe

Install MSE instead (also free): http://www.microsoft.com/security_essentials


...Summary of the Dumps:
Code:

Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Tue Aug 17 00:09:25.956 2010 (UTC - 4:00)
System Uptime: 0 days 1:00:17.063
BUGCHECK_STR: 0x4E_99
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sun Aug 15 23:21:45.877 2010 (UTC - 4:00)
System Uptime: 0 days 0:07:37.984
BUGCHECK_STR: 0x1a_3452
PROCESS_NAME: avgcsrvx.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Thu Aug 12 02:32:54.531 2010 (UTC - 4:00)
System Uptime: 0 days 1:05:40.638
BUGCHECK_STR: 0x1a_61940
PROCESS_NAME: explorer.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Mon Aug 9 02:53:02.422 2010 (UTC - 4:00)
System Uptime: 0 days 4:03:04.530
BugCheck A, {c0019078, 0, 0, 828c561e}
Probably caused by : memory_corruption ( nt!MiEmptyWorkingSet+16f )
BUGCHECK_STR: 0xA
PROCESS_NAME: avgchsvx.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: ... Read more

Read other 1 answers
RELEVANCY SCORE 56.8

? OS - Windows 7
? x64 ?
? What was original installed OS on system? Windows 7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? OEM
? Age of system (hardware) about 2 months
? Age of OS installation - have you re-installed the OS? OS from old computer several years old

? CPU AMD FX 8350 (4ghz)
? Video Card AMD Radeon R9 280x (XFX)
? MotherBoard Asus
? Power Supply - 630W (unsure of brand)

? System Manufacturer - Home build
? Exact model number

Laptop or Desktop? Desktop

A:bsod memory dump files

Hi,

We have two bug checks:

KMODE_EXCEPTION_NOT_HANDLED (1e)

This indicates that a kernel-mode program generated an exception which the error handler did not catch.

BugCheck 1E, {ffffffffc0000005, fffff80004706622, 0, ffffffffffffffff}


Code:

6: kd> ln fffff80004706622
(fffff800`04706610) nt!KxWaitForLockOwnerShip+0x12 | (fffff800`04706660) nt!KxWaitForLockChainValid
The exception occurred in nt!KxWaitForLockOwnerShip.
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)

This indicates that a system thread generated an exception which the error handler did not catch.

BugCheck 1000007E, {ffffffffc0000005, fffff800046a6622, fffff880009a9758, fffff880009a8fb0}

The 1st parameter of the bug check is 0xc0000005 which indicates an access violation occurred.


Code:

6: kd> .exr 0xfffff880009a9758
ExceptionAddress: fffff800046a6622 (nt!KxWaitForLockOwnerShip+0x0000000000000012)
ExceptionCode: c0000005 (Access violation)
The violation occurred in nt!KxWaitForLockOwnerShip.

-------------------

1. AODDriver2.sys is listed and loaded in your modules list which is AMD Overdrive; also in EasyTune6 for Gigabyte motherboard. Known BSOD issues in Win7 & 8.

Please uninstall either software ASAP! If you cannot find either software to uninstall, or it's not installed, please navigate to the following filepath:

C:\Program Files\ATI Technologies\ATI.ACE\Fuel\amd64\AODDriver2.sys

and rename AODDriver2.sys to AODDriver.2old
... Read more

Read other 10 answers
RELEVANCY SCORE 56.8

BSOD errors. I would appreciate assistance analyzing these dump files for a solution. This is the BSOD message....

BCCode 1000008e BCP1:C0000005 BCP2:806E694F BCP3:A9B9EB8
BCP4:00000000 OSver:5_1_2600 SP3_0 Product:256_1

I'm not being permitted to attach files to this post but can email to anyone willing to take a look at them.

A:[SOLVED] BSOD Dump Files

Hi rerun1 and welcome to TSF

I think I remember an issue dealing with file extension that prevents a file from being attached to a post. Try ziping the dump files and see if a .zip extension will attach.
If that works, I'll make it a mission of mine to be more profound next time I tell someone
I'm not good at decyphering dump files, but others on this forum are. I usually look at errors in the events viewer to determine course of action. A double click on an error there will give more details about the error.

Hope this helps
Mack1

Read other 3 answers
RELEVANCY SCORE 56.8

Recently I have had a few crashes on my windows 8.1 laptop.
I have tried to attach the 3 most recent zipped dump files, but they're 100mb and too big to attach, so have uploaded the most recent one to here and the previous crash to here

I have attached screen shots of the system information -system summary

Hoping someone is able to see why it keeps crashing. Recently a friend of mine updated the bios, ran cc cleaner on it, did all the windows updates and optimized it, which I hoped would cure this issue, but it's still happening.
Thank you.

A:Please help analyse BSoD dump files

Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum):
Blue Screen of Death (BSOD) Posting Instructions

Ensure that your system is set to capture Minidumps (C:\Windows\Minidump):





Upload Dump Files:
NOTE: If using a disk cleaning utility, please stop using it while we are troubleshooting your issues.
Please go to C:\Windows\Minidump and zip up the contents of the folder. Then upload/attach the .zip file with your next post.
Left click on the first minidump file.
Hold down the "Shift" key and left click on the last minidump file.
Right click on the blue highlighted area and select "Send to"
Select "Compressed (zipped) folder" and note where the folder is saved.
Upload that .zip file with your next post.

If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there. If it still won't let you zip them up, post back for further advice.

If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP. If you find it, zip it up and upload it to a free file hosting service. Then post the link to it in your topic so that we can download it.

Also, search your entire hard drive for files ending in .dmp, .mdmp, and .hdmp. Zip up any that you find and upload them with your next post.

Then, follow the directions here to set your system for Minidumps (much smalle... Read more

Read other 1 answers
RELEVANCY SCORE 56.8

I've got absolutely no clue what is going on with my computer. I've gotten these 2 kinds of blue screens. Sometimes it will even restart without me seeing a BSoD.

Computer Specs:

OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00 GHz, Intel64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3071 Mb
Graphics Card: Nvidia GeForce 8800 GS, 384 mb
Hard Drives: C: Total - 305234 MB, Free - 185931 MB;
Motherboard: MICRO-STAR INTERNATIONAL CO.,LTD, MS-7514
AntiVirus: None

(I only JUST uninstalled AVG because I had read it can cause problems with what I'm having.. obviously didn't fix it.)

I can't even get into the forums long enough to get the information written down before it crashes so I got pictures of the Bluescreenviewer information using my phone.

Latest BSoD:

One I was getting a little while ago before the IRQL_NOT_LESS_OR_EQUAL one:


I only know of one thing that could possibly cause this and that is I used to have 4 GB of ram and one of the cards doesn't work and crashes my computer, so I took it out. This was a long time ago and I fixed it. But only recently these problems have started, and I haven't downloaded anything besides an update to my anti-virus which I uninstalled and the drivers for my network card.

Any tips?
UPDATE: I ran a memory test overnight and it ran 12 times. No errors whatsoever.
 

Read other answers
RELEVANCY SCORE 56.8

Hello.

As I already mentioned in the title i had a BSOD. It was the first time after I formatted my Win 7 professional x64 about a month ago so maybe somekind of driver issues but i wouldn?t know.

basic specs can be found by checkin my forum account and im glad to give any extra information.

Thanks for any help you can offer.

Martin

A:BSOD while using VLC (dump files added)

Dump file points to netw5v64.sys as the possible problem. Try updating the drivers for your network card.

http://downloadcenter.intel.com/Default.aspx?lang=eng

If the problem still persists, check your ram using memtest. My pc crashed when I was using VLC once and it was because my ram was faulty.

Memtest86+ - Advanced Memory Diagnostic Tool

Read other 4 answers
RELEVANCY SCORE 56.8

Hello everyone. I have a Dell laptop almost for 4 years and I am facing BSOD 's. They happened during a month and then everything went back to normal. But I have some very large dump files left which even using WhoCrashed or BlueScreenView didn't help me. I use computers for many years and I am an experienced user, but the error codes are out of my league. 
 
Please find the sysnative zip file attached. Also the Speccy snapshot link is the following:
http://speccy.piriform.com/results/nDYFZFhiXEGmAxdqu3mPvKU
 
Thank you in advance for assisting! 
Albert

A:BSOD's with large Dump files

Sysnative reports not attached.
 
I'd suggest also checking over in the General Security forums for your status with the Spectre/Meltdown updates.
They can cause problems with booting and/or BSOD's - but I'm not familiar with the details on them.
Here's a link to the General Security forums:  https://www.bleepingcomputer.com/forums/f/45/general-security/
 

Read other 6 answers
RELEVANCY SCORE 56.8

I've been running out of ideas now, and windbg somehow doesn't make me open the .dmp files, so I'm desperately asking for help :( I don't know what's wrong with my computer with the tons of BSOD.

Here's the link with attached dump file:
https://drive.google.com/open?id=1kuRVG6KLZhXM3NTuzguDFFDdiyhzDj5S

Read other answers
RELEVANCY SCORE 56.8

Hello guys, I am having issue with my computer lately. tried to look for an answer of why my pc keep crashing with stop error 0x00000024 hope someone could help me understand what cause this issue.
 

A:BSOD need help with understanding the dump files

Your logs show a problem with DeepFrz.sys. It is a driver for Deep Freeze software. You could re-install, un-install, or upgrade it; or check with the manufacturer (Faronics) to see if the have a solution.
 

Read other 2 answers
RELEVANCY SCORE 56.8

EDIT: Uploaded the debug.zip file as prompted in the instructions.

Hi all,

Having severe BSOD Bad_Pool_Caller issues lately (last 48 hours). I noticed this was an issue because around the same time, all video on my system (youtube, VLC player, etc.) will occasionally stutter/lag and show crazy artifacts. Soon after, things will slow down to a crawl and the system will randomly crash. It has started crashing even while not watching video, so this is a frustrating issue for me. Lately, I've noticed that the system will crash within fifteen minutes after waking up if the monitor has gone to sleep.

From what I've read, I understand that this could be RAM error or a driver issue, but I've run memtest on my ram and I don't think it's a hardware issue. I'm more than happy to swap out all my ram if necessary, but would prerfer to see if anyone can help me read some dump files.

I've used bluescreenview and it would appear that most of the crashes occur due to ntoskrnl.exe. I have no idea what this is and I have no idea what to do next. I've attached a few dump files from the last two days, system information (from Speccy), and an overview of bluescreenview in a dropbox folder and would greatly appreciate if someone on here can help me out.

Dropbox - Mini Dumps

Much appreciated and thanks in advance!!
bunsinator

A:BSOD due to ntoskrnl.exe? Help with Dump files

Hello bunsinator,

We'd like to help but there is evidence that you are using pirated Adobe software on your system. Unless you remove it we are not able to help you because it is against the forum rules to engage in any help when we know piracy is involved.

Read other 3 answers
RELEVANCY SCORE 56.8

I ran verifier.exe and caused a BSOD and created two crash dumps. I'm trying to read them, but I keep getting an error every time I try to install the debug tool to read the files. I read online that I can post them here, hopefully someone read them and help me figure out what driver is causing the BSOD. Thanks in advance!

Read other answers
RELEVANCY SCORE 56.8

Hello everyone,

I am running Windows 7 Pro 32bit on HP and I have gotten many random BSOD's while being use on internet (play game online). I have updated lastest Windows , VGA, all driver from HP but still have BSOD. I can not read dump files. please help me

Thanks

A:BSOD Please help me to read my dump files

Only ran the 9 memory dumps from July - the one's from May (a total of 21) suggest the same thing.
The 9 from July are STOP 0x1 errors - Although I did see one STOP 0x119 (video driver) error in the May dumps along with several other errors blaming your ATI video drivers.

If you haven't done anything to fix the May errors (there were no errors in June), then please do the following:
- download the Display Driver only (NOT the entire Catalyst Control Center) from Global Provider of Innovative Graphics, Processors and Media Solutions | AMD
- uninstall the current ATI stuff from your system
- install the Display Driver and monitor for further BSOD's.

Then, if the errors are still occurring, try running Driver Verifier according to these directions:





Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter... Read more

Read other 1 answers
RELEVANCY SCORE 56.8

my laptop keeps crashing someone please help me. here are the dmp files

A:BSOD.. Dump files uploaded

You have 2 BC exceptions A and 50
STOP 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA :Usual causes: Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus, Device driver, NTFS corruption, BIOS
The cause may be defective physical memory or incompatible software,especially remote control and antivirus programs. If the error occurs immediately after installing a device driver or application, try to use Safe Mode to remove the driver or uninstall the program. For more information,

STOP 0x0000000A: IRQL_NOT_LESS_OR_EQUAL Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus scanner, Backup tool, compatibility
A kernel-mode process or driver attempted to access a memory location without authorization. This Stop error is typically caused by faulty or incompatible hardware or software. The name of the offending device driver often appears in the Stop error and can provide an important clue to solving the problem. If the error message points to a specific device or category of devices, try removing or replacing devices in that category. If this Stop error appears during Setup, suspect an incompatible driver, system service, virus scanner, or backup program.


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\richc46\AppData\Local\Temp\Temp1_Desktop[1].zip\Mini080310-01.dmp]
Mini Kernel Dump File: Only registers and stack tra... Read more

Read other 1 answers
RELEVANCY SCORE 56.8

When starting up windows 7 and getting to the part to enter my password to login I receive the BSOD. I restarted my computer in Safe Mode then restarted and it worked fine.

This is a brand new computer, bought from cyberpowerpc I have been using it for about 3 days.

A:BSOD on loggin have dump files

You need to update the Bigfoot Ethernet driver
Find an update for the Killer Xeno Gaming Adapter driver or remove the device
Support

These two drivers are obsolete

Read other 1 answers
RELEVANCY SCORE 56.8

Hey can someone please help me and analize this dump files?
Win 8 X64
I have recently recovery my pc to factory settings, and now it take too long for start and show the an error that caused my pc to restart and if i want to send my dump files to Microsoft..

minidump.zip

Read other answers
RELEVANCY SCORE 56.8

Hello,

I started noticing that my newly built computer suddenly restarts without warning and offers no BSOD. I built it about 3 weeks ago, and originally it did not have this problem. I Googled a solution for no BSOD, and they suggested to do this:





Quote:
Right Click My Computer -> Properties -> Advanced System Settings -> Advanced Tab -> Under Startup and Recovery click Settings -> untick the box for automatic restart


I haven't turned my computer on in fear of something really breaking, but I was able to get all of the dump files per this post: Dump Files - Upload to SevenForums
(I tried to download WinDdg, but the installer from Microsoft kept failing out on my good computer).

I was going to run the dm log collector as it says in the BSOD rules on posting, but I'd rather not take a chance with my newly built computer. I can do that, but I want to minimze the risk (I really can't afford a new build). Attached are the dump files in .zip format.

Specs:

Code:
--Custom Build
--Windows 7 Professional 64-bit
--AMD FX-6300 3.5GHz 6-Core Processor
--Gigabyte GA-78LMT-USB3 Micro ATX AM3+ Motherboard
--Kingston 8GB (2 x 4GB) DDR3-1333 Memory
--Asus Radeon R7 260X 2GB Video Card
--Old (but Healthy according to SMART data) Samsung 250 GB Drive
--Corsair CSM 650W 80+ Gold Certified Semi-Modular ATX
--NZXT Sentry Mix 2 Fan Controller
--Gear Head USB 2.0 4-Port Hub with Energy Saving Switch
--Avast! Free Antivirus

A:Immediate restart w/ dump files but no BSOD

I had to use my computer last night, no problems for awhile. I start playing some n64 games on it for a few hours hours, seems good, then it randomly restarts again with no blue screen. The checkbox to "automatically restart after errors" was unchecked as I did that earlier, so I'm surprised why there wasn't a blue screen. I have another dump file from it as well.

Can anyone read these dump files for me please??

Read other 9 answers
RELEVANCY SCORE 56.8

Hello everyone,

I am running Windows 7 Utimate 64-bit and I have gotten many random BSOD's while being use on internet . I have opened the dump files. And all of them say that probable cause is: ntoskrnl.exe ( nt+71f00 ).

Attachment 53661

I have attached a .zip file with these dump files too.
I've passed the test of memory, no erreurs was dectected.

Any information very much appreciated.

A:BSOD Please help me to read my dump files

Please help me, many thanks to you.

Read other 9 answers
RELEVANCY SCORE 56.8

Hey guys,
I have a problem with my computer. I have it just for like a month or so and I already had several BSODs (actually 8 of them). They all happened in 2 situations. First during rendering in 3D Studio Max and second during playing Starcraft 2. Rendering might be even problem of 3Dstudio so I'm going to pay attention to those happened while playing.
Problem is that first two happened longer time ago and I didn't payed to much attention to them, because I thought they were random crashes. But today they started to happen after around one hour of playing. I had three of them today in during few hours.
The thing is that everytime it's different kind of BSOD and different driver causing it. I tried to look into the .dmp files and I was able to get the drivers from them.
First was:
bug check code - SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
caused by driver - dxgmms1.sys

Second:
bug check code - KMODE_EXCEPTION_NOT_HANDLED
caused by driver - Wdf01000.sys

Third:
bug check code - DRIVER_IRQL_NOT_LESS_OR_EQUAL
caused by driver - Ntfs.sys

I tried to google a lot but I don't really know what to look for because everytime it's different error.

First I thought it may be overheating but temperature of processor seems fine (below 50?C)

My configuration is:
OS: Windows 7 Proffesional x64
OS Version: 6.1.7600.2.0.0.256.48

processor: Intel? Core™ i7-930 (8MB cache,2.80 GHz, 4.80 GT/s) LGA 1366
graphics: ATI Radeon HD 5850 1GB Vapor-X DDR5, HDMI... Read more

A:BSOD problem - dump files

  
Quote: Originally Posted by klayman


Hey guys,
I have a problem with my computer. I have it just for like a month or so and I already had several BSODs (actually 8 of them). They all happened in 2 situations. First during rendering in 3D Studio Max and second during playing Starcraft 2. Rendering might be even problem of 3Dstudio so I'm going to pay attention to those happened while playing.
Problem is that first two happened longer time ago and I didn't payed to much attention to them, because I thought they were random crashes. But today they started to happen after around one hour of playing. I had three of them today in during few hours.
The thing is that everytime it's different kind of BSOD and different driver causing it. I tried to look into the .dmp files and I was able to get the drivers from them.
First was:
bug check code - SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
caused by driver - dxgmms1.sys

Second:
bug check code - KMODE_EXCEPTION_NOT_HANDLED
caused by driver - Wdf01000.sys

Third:
bug check code - DRIVER_IRQL_NOT_LESS_OR_EQUAL
caused by driver - Ntfs.sys

I tried to google a lot but I don't really know what to look for because everytime it's different error.

First I thought it may be overheating but temperature of processor seems fine (below 50?C)

My configuration is:
OS: Windows 7 Proffesional x64
OS Version: 6.1.7600.2.0.0.256.48

processor: Intel? Core? i7-930 (8MB cache,2.80 GHz, 4.80 GT/s) LGA 1366
graphi... Read more

Read other 1 answers
RELEVANCY SCORE 56.8

I ran verifier.exe and caused a BSOD and created two crash dumps. I'm trying to read them, but I keep getting an error every time I try to install the debug tool to read the files. I read online that I can post them here, hopefully someone read them and help me figure out what driver is causing the BSOD. Thanks in advance!

Read other answers
RELEVANCY SCORE 56.8

I am having constant BSOD Occurrences. I am attaching the mini dump files from the crashes. If you could help me figure out what is causing these I would appreciate it. I have also attached my system info.



Thanks,

JPerrin

A:Need Help With BSOD, and Mini Dump Files

Code:
fffff880`0a122610 fffff880`04d8e748Unable to load image BHDrvx64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for BHDrvx64.sys
*** ERROR: Module load completed but symbols could not be loaded for BHDrvx64.sys
BHDrvx64+0x14f748
What is bhdrvx64.sys ? | System Explorer

Code:
fffff880`0a122870 fffff880`043aff00Unable to load image SYMEVENT64x86.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMEVENT64x86.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT64x86.SYS
SYMEVENT64x86+0x26f00
What is symevent64x86.sys ? | System Explorer

Uninstall Norton and all Symentec products using Norton Removal tool. At least as a test. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Let us know the result.

Read other 1 answers
RELEVANCY SCORE 56.8

I ordered my computer from Puget Systems some time ago and recently sent it in for repair because of a faulty motherboard. They replaced the motherboard, ram module and installed an 8800 GTX video card. Ever since i got it back I have been getting the DRIVER IRQL Not less then equal BSOD. When I reboot it does the same bsod upon loading my desktop. The only thing I have found to fix the problem is to boot into safemode and reinstall my video drivers. I installed different drivers and the problem seemed to vanish for a few weeks until today. I was loading into a HL2 server and it never loaded and I couldn't ctrl-alt-del so I did a hard shutdown and rebooted to receive the same error. After some research I came to discover the minidump files and this forum.

below is the 2 dumps from today and 3 of the 4 dumps from the last time i had the bsod other then today.

also uploaded on my webspace is all my dumps since i got the computer.. 06-xx-07 is the month I got my computer back from repair..anything before then probably isn't relevant.

http://blackmage.org/leaderz0rz/Minidump.zip
 

A:BSOD dump files included

All the current minidumps point to NTOSKRNL.EXE...

This denotes a general Windows instability. I would start by testing or swapping this new RAM module... It may be defective
 

Read other 4 answers
RELEVANCY SCORE 56.8

debug-EFI-RIP-xxxx.rar

This problem occurred about two weeks ago. Computer randomly BSODs about 10 times a day and stays on 0%. Minidump Files are not being created, even after adding the minidump file to the %SystemRoot%. I have it set up the same way that was instructed on this website (Through Startup and Recovery), the only difference that I had was that the Automatic Restart was not checked(it is now but I haven't BSOD since then). I also used the registry file available through this website but haven't BSOD since then either.

I ran an sfc scannow and will give the link to the CBS file here. http://www.filedropper.com/cbs_8

Thank you very much for taking the time.

Regards

Read other answers
RELEVANCY SCORE 56.4

I think I've followed all the BSOD posting instructions. BSOD happened the first time after I finished downloading GW2 for the free trial weekend. I've tried system restore twice and it worked for a day, then back to the same thing. I have no idea what I'm doing. Thank you in advance for any help!

A:BSOD on start-up. Dump-files attached

Hello SpiritSprite, Welcome to SF

First off if your OCing in anyway stop, return everything to stock settings for the purposes of testing

If you havent already, fill in your system specs so we know what we are dealing with
System Info - See Your System Specs

Run some scans to check against virus or infection
http://support.kaspersky.com/5350
Windows Defender Offline

Run some basic hardware tests
RAM - Test with Memtest86+
Disk Check (windows based check)
Hard Drive Diagnostic Procedure (bootable disk check)

Theres a lot of dumps there i ran the ones for december and they are a mix of
0x1E KMODE_EXCEPTION_NOT_HANDLED BSOD Index
0xA IRQL_NOT_LESS_OR_EQUAL BSOD Index
0x50 PAGE_FAULT_IN_NON_PAGED_AREA BSOD Index

I would run through the above and in particular memtest, make sure you run it for multiple passes or preferably overnight

Read other 2 answers
RELEVANCY SCORE 56.4

I was in the middle of a game when it went to BSOD. I can't remember the last time I had one, I've made no hardware or driver changes to my system in a long, long time.

It IS pretty hot where I am and my computer was on for almost 7 days at the time and I also had a ton of other programs open at the same time. Was it a simple memory problem or is it something more that I should be concerned about?

I run CPUID Hardware Monitor to check my temps and nothing was out of the ordinary just prior to this (even after gaming, temps were normal).

Thanks for any help!

---

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA80050A6038
BCP3: 00000000B2000040
BCP4: 0000000000000800
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

A:Can anyone tell me what caused this BSOD? Dump files attached

Hi,

1. Remove RivaTuner (it could be relabelled as MSI Afterburner? I can't tell from the info given)

2. Update your graphics drivers - http://www.nvidia.com/Download/index.aspx?lang=en-us

3. Remove SPTD.sys. It is known to cause BSODs; remove Daemon Tools, then use this SPTD installer to remove it (pick the uninstall option when you run the installer): http://www.duplexsecure.com/en/downloads

4. Run some hardware tests:


Quote:




Memtest86+ - Instructions:

Download the ISO (or the .exe for USB drives) from here http://www.memtest.org/#downiso

Then (if you have chosen the ISO) burn the ISO using IsoRecorder: ISO Recorder v3 Download (How to use IsoRecorder)

Boot from the CD/USB and run the test (at least 7 passes per test) with only one stick of RAM in place at a time.

It is a time consuming process but it is the only way to be sure it isn't a RAM fault.

For your final test, run the test with all the RAM in place.




http://www.sevenforums.com/tutorials...t-prime95.html (run the Blend test as well as the Small FFT test)

http://www.sevenforums.com/tutorials...t-furmark.html

5. If you get any more BSODs, then follow these http://www.techsupportforum.com/f217...ml#post2545708

Also, what Brand/Model PSU do you have?

Regards,
Reventon

BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sun Nov 7 19:05:59.404 2010 (GMT+13)
System Uptime: 7 days 9:54... Read more

Read other 3 answers
RELEVANCY SCORE 56.4

Hello,

I would like to learn to analyze myself the BSoD dump.

The reason is because I work as a PC technician and it's not uncommon that a client call me complaining about a blue screen. The fact is that I would like to get independent and not have to upload the files here at the BSOD section every time I bump with such issue.



I already know how to collect the info with the DM LOG COLLECTOR and now I need to know what are the recommended software to open the files. And, of course, how to track the problem down. Does the analyzing software narrow the possible origin of the issue and gives me a clue where to look at? Or I have to track it down manually reading the whole thing?

Any help appreciated! Thanks!

Read other answers
RELEVANCY SCORE 56.4

So my power went off very briefly while I was on the computer. It turned back on itself to resume, but then got the blue screen of death and shut down a few seconds after start up. I tried restarting, completely shutting it down and starting it, but it keeps shutting down with BSOD maybe 30 seconds after it starts up. I am able to use the computer in safe mode with networking, which I'm on now. I will post the dump files.

A:BSOD after power cut out, don't know error # but have dump files

Norton anti virus appears to be cuasing problems. Can you please uninstall it and replace it with Microsoft Security Essentials and Malwarebytes.

Microsoft Security Essentials - Microsoft Windows

Malwarebytes : Free Anti-Malware

Go here to download the Norton 360 removal rool

https://support.norton.com/sp/en/uk/...rProfile_en_us


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {0, 2, 1, fffff80002c83c3f}

Unable to load image \SystemRoot\System32\Drivers\NISx64\1502000.026\SYMNETS.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SYMNETS.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMNETS.SYS

Read other 3 answers
RELEVANCY SCORE 56.4

Hi all,

I've been getting some hard reboots while gaming recently. Generally, there have been no BSODs and crash dump files created when these reboots occur. I have since ran Windows' driver verifier to force some BSODs that may/may not be related to the reboots I am seeing. I should note that the reboots only happen while gaming. My temperatures are fine, and my voltages are fine. I have ran furmark and prime95 to stress the hardware, and have not duplicated the reboots. Any help is greatly appreciated - I have attached my recent crash dumps.

My specs:
Intel i5 4690k cpu
Gigabyte GA-Z97X-Gaming 5 mobo
Radeon R9 280 3GB gpu
Corsair HX850 modular psu
16GB Crucial Ballistix ram

A:BSOD Help (also crashes without BSODs and dump files)

Remove Panda, use Windows Defender as alternative and let me know how it goes
Driver Reference Table - PSINFile.sys

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffff80000003, fffff803897d3c18, ffffd00147bc4bb8, ffffd00147bc43d0}
*** WARNING: Unable to verify timestamp for PSINFile.sys
*** ERROR: Module load completed but symbols could not be loaded for PSINFile.sys

Read other 0 answers
RELEVANCY SCORE 56.4

Been getting seemingly random BSOD only thing i've changed recently was my logitech drivers for my mic, changed those back to the originals and still crashing.

Ran diags on hard drive, motherboard and ram and all seem to be working fine so im back to thinking its driver related, don't know an awful lot about software related problems so any advice would be greatly appreciated

Thanks,
Jack

A:BSOD 0x0000000f4 dump files included

Hello GenericGrim, Welcome to SF

First off if your OCing in anyway stop, return everything to stock settings for the purposes of testing

If you havent already, fill in your system specs so we know what we are dealing with
System Info - See Your System Specs

Run some scans to check against virus or infection
Anti-rootkit utility TDSSKiller
Windows Defender Offline


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck C2, {7, 109b, 402003d, fffffa8007e8e3e0}
*** WARNING: Unable to verify timestamp for ZyxelUDSMBus.sys
*** ERROR: Module load completed but symbols could not be loaded for ZyxelUDSMBus.sys
GetPointerFromAddress: unable to read from fffff800038b5100
GetUlongFromAddress: unable to read from fffff800038b51c0
Probably caused by : ZyxelUDSMBus.sys ( ZyxelUDSMBus+4a43 )
Followup: MachineOwner
---------
5: kd> lmvm ZyxelUDSNBus
start end module name
5: kd> lmvm ZyxelUDSMBus
start end module name
fffff880`00e16000 fffff880`00e2e000 ZyxelUDSMBus T (no symbols)
Loaded symbol i... Read more

Read other 6 answers
RELEVANCY SCORE 56.4

Hi

I have been given a laptop that has never worked correctly. It's pretty much unused, but crashes soon after booting. I have run a CHKDSK and no errors were found.

The dump files are attached - any help will be much appreciated.

A:BSOD soon after boot. Dump files attached.

upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
Stop 0x50, Ntfs

Read other 9 answers
RELEVANCY SCORE 56.4

Hello, I keep getting a BSOD error. I don't know what is the cause so I am putting the dump up here and hopefully someone can help me find the cause.

A:BSOD Crashing/dump files attached

Here is my pc specs as well:

Sony VAIO Notebook
AMD ATHLON(tm) II P320 Dual-Core Processor 2.10 GHz
4GB RAM
64-bit Operating System
Windows 7 Home Premium
Service Pack 1

Read other 1 answers
RELEVANCY SCORE 56.4

i get these Page fault error alot

installed 3 months ago exactly after i biut this PC Win 7 x64

Please look into these Minidumps

A:BSOD in almost every action that i do Please read these dump files

Please remove any CD/DVD virtualization software, such as Daemon Tools/Alcohol 120%, as they use a driver called sptd.sys that is known to cause BSODs. Use add/remove programs to remove the software. After removing the software, use the sptd.sys uninstaller to remove sptd.sys from the system.

I prefer TotalMounter as my CD/DVD virtualization software as it allows me to burn images to a virtual CD/DVD if I just want an ISO file instead of a disc, and it is free.

Many use MagicISO - Convert BIN to ISO, Create, Edit, Burn, Extract ISO file, ISO/BIN converter/extractor/editor as well, which is also free.
Crashes are pointing to memory problems or driver conflicts.If you are overclocking any hardware, please stop.

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your... Read more

Read other 1 answers
RELEVANCY SCORE 56.4

Hi, I am wondering if I can somehow determine the cause of 2 bsod's, even without dump files, since they were not created. I changed setting since the first bsod, to get dump files, and the second time it looked like the dump was being created, but it didnt complete I guess, since there are no minidump files.

A:Can I diagnose BSOD without dump files ? They were not created.

Here's the DM log collector file.

Read other 2 answers