Over 1 million tech questions and answers.

x201-t what screen do i have (and is it finger tou...

Q: x201-t what screen do i have (and is it finger tou...

Hello,
I bought a x201 tablet and expected it to be touchscreen (fingers). That won't 't work, only pen operation.

Can someone tell me what type of screen i have. I upgraded to an SSD and will get Winows 10 soon (instead of Winows 7). Any suggestions for the set up of the (touch or pen) drivers?


It says: TYPE 3113-EV3 S/N xxxxxxx
PRODUCT ID : 3113EV3

Thanks!

Carlo

Mod Edit: S/N Removed










Solved!
Go to Solution.

RELEVANCY SCORE 200
Preferred Solution: x201-t what screen do i have (and is it finger tou...

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: x201-t what screen do i have (and is it finger tou...

According to the parts lookup page you have this screen:


13N7297 FRU400nit(TMD)

This is a 400 nits outdoor screen, 1280x800 resolution, as far as I know it's pen only.

Read other 4 answers
RELEVANCY SCORE 52.8

Is it difficult to replace the screen latch on an X201 tablet?  I've worked on T series laptops replacing lcds and drives and the like.  Thanks for any info!











Solved!
Go to Solution.

A:X201 replacement latch on X201 tablet?

Welcome to the forum!
 
Well, it's not that difficult but you need to disassemble a lot of parts. This is fairly easy to do if you closely follow the instructions of Lenovo's Hardware Maintenance Manual, which you can download from here: click me!
 
Check chapter 8 -2040
 
-

Read other 3 answers
RELEVANCY SCORE 51.2

Hi, I have a Lenovo X201, it boots up fine and the external VGA works ok, I am typing this now on the X201, but the laptop screen is completely black. On the initial boot I can very faintly see the Thinkvantage on the display. I have not added RAM or anything, just turned it off yesterday working fine and today the laptop screen is black. Any ideas?

A:X201 Black Screen

The 2 most common reasons for your symptoms are this:Blown fuse on the motherboardstuck switch that senses the lid is closed

Read other 5 answers
RELEVANCY SCORE 50.8

Any quick fix on shadows on my screen?

Read other answers
RELEVANCY SCORE 50.8

Hello, I have a x201, that is used with a docking station and an external monitor. Up to know, it has been properly working, but now, my son is using it for high school. He didn't realize that for undocking the laptop, this must be powered off, or press the undock button. The issue is that yesterday morning he powered on the laptop undocked, and the screen was black. We docked it with the lid down, and we could see the Windows logon page on the external monitor, we lid up the laptop screen, but it was balck. I've tried yesterday evening to remove the battery for some minutes, and inserting it again, and seemed to work. But this morning has happened the same. Does anyboy has any solution? Regards,

Read other answers
RELEVANCY SCORE 50.4

can I use my wacom intuos pen for thinkpad x201 tablet's screen? is the pressure still working?

Read other answers
RELEVANCY SCORE 50.4

hello community.....I have an x201 tablet.....On this machine i have installed win10. It work very good but there is a problem. With win10 only the pen work on the screen, but not the finger touch.So I tried xubuntu live distro and surprise...  the touch screen work fine with the finger and also the pen..... I think it is a driver problem.May you help me to fix the problem with win10?thanks in advance 













Solved!

Go to Solution.

A:X201 tablet touch screen problem

Hi @nathfalco!
 
Welcome to Lenovo Community Forums.
 
Kindly try to disable/renable the touch screen driver from device manager and observe if you'll see any changes.
Open Devices Manager > Human Interface Device > HID-compliant Touch Screen (Your touch device). Right-click on it and select Disable.
 
If the issue still persist, try to update the driver from the WinX Menu, open Devices Manager > Human Interface Device > HID-compliant Touch Screen (Your touch device). Right-click on it and select Update to update this driver.
 
Hope these helps.
 
Regards,

Read other 2 answers
RELEVANCY SCORE 50.4

I recently got a Lenovo ThinkPad x201. It's can be converted into a tablet, and presumably, it also haa touch screen features. Tinkering with the device, I can't seem to verify this. The system information displays the following: Pen and Limited Touch Support with 2 Touch Points. The laptop did not however come with a pen ?as I'd bought it in a local classifieds. Could that what the "Limited Touch Support" mean? That you can only utilize the touch screen feature provided you have the pen (stylus)?  For reference, here's my device's product ID: 2985F4U

Read other answers
RELEVANCY SCORE 49.2

Hi,My X201 was working perfect untill my screen went black. I searched the web and found out that the Led backlight fuse is broken. I tried to bridge the fuse instead of replacing it, just soldered the connections. It worked perfectly and everything was normal again. After a while I noticed that no matter what I do, the laptop cannot restart. I shuts down completely normal but cannot restart. I thought it might be a windows problem but it was not. I replaced the hdd, installed new windows but no success. I was fed up but it was not a big deal since I could press the power button for 5 seconds and it would shut down. No the most convenient way but I had no other solution. A few days ago, I inserted another hdd in order to retrieve some files off the disk. The laptop could not boot, no matter what. It turn on, all the lights turn on but immediately shuts down. I do not even get to see the boot screen. Nothing at all. I tried with another hdd, same problem. I changed the Ram, no success. So I took the hdd out and tried to boot without any hdd. To my surprise it booted. I got the boot screen and I checked the Bios, everything normal.Then I inserted the hdd while the system was still on, it turned off immediately. It?s the same no matter what I do. As long as any hdd is installed, the notebook won?t boot. I tries to boot, I get no boot screen, just the indicator lights and then it restarts.With the hdd Not installed, I could manage to boot from a USB stick, it worked perf... Read more

Read other answers
RELEVANCY SCORE 48.8

Hi All, As the title states - New Windows 10 Update is not letting me access my desktop after I login to my account. I am just staring at a black screen with my cursor on it. I have tried to open up task manager, but nothing happens.  Any suggestions? Help would be greatly appreciated!Mike

Read other answers
RELEVANCY SCORE 48.4

Hey. So I recently bought a second hand X250. There are no issues, and once I updated the drivers, most evreything seemed to be working fine. The only issue I have is with the two finger scrolling. So, two finger scrolling itself is fine, but if I lift a finger, it keeps scrolling even when I'm moving with one finger. For example, I'm Scrolling through a page for a link, I find it, then want to click on it. As I move my finger, the screen scrolls instead of the cursor moving. The simple solution would be to just lift my fingers and put it back down, but at this point, it's a habit. I've seen a couple of other posts about it, but havne't seen any solutions. Has anyone found a fix for this?

Read other answers
RELEVANCY SCORE 48.4

Hi,

I have a Portege Z30-A-183.
First I used it with W7 and I saved 3 fingers in the biometric finger sensor .

After that I updated to W8.1 but I didn't deleted the data of the scanned fingers.

In W8.1 I haved triy to save again the data of my fingers but the software said that it is not possible beacause in the memory of the sensor are the data of my fingers.

I haved read that these data are in a non volatile memory on the sensor.

How I can erase this data?

Thanks

A:Portege Z30-A-183 - Erase Finger data in Finger Sensor

Hi

Yes the fingerprint information is not saved on the Hard Disk Drive (HDD) of your computer but on the certain chip.

Usually the fingerprint has to be removed using the Fingerprint Utility but if this will not work after the new OS installation, I would recommend you to go back to the previous state before changing the system and to use the fingerprint software which was used for fingerprint registration.

Details here:
http://www.mytoshiba.com.au/support/items/faq/386

But in case the fingerprint would not work even using the Win 7 version, I think that only Toshiba authorized service provider would be able to delete the already registered fingerprints.

Read other 8 answers
RELEVANCY SCORE 47.6

I have a Lenovo x201 laptop, It has been sent back for repairs from employee.At first, the fan seemed to be not working causing overheating. I then replaced the fan however the laptop kept shutting down as soon as sign in screen showed up.I think there is a FAN issue where it doesn't run because of low computer usage causing the laptop to crash.I have found a workaround which is a weird way.So if I REMOVE the battery from the back and PLUG in the adapter, the laptop works just fine. I have to care to not unplug the cord accidentally. When I start the laptop + signin everything works fine, and I can hear the fan spinning where before, when the battery was plugged in, It used to idle causing a crash.Now if I put the battery back in. WHILE it is PLUGGED IN and on desktop screen, it SHUTS OFF in a matter of seconds.I concluded that the BATTERY causes the FAN to IDLE which in turn shuts the LAPTOP off because it is thinking the FAN is FAULTY.Now I am on a domain at the moment, so I cannot download a CPU Fan Management Program to keep the fan at a steady X%.ANY IDEAS ? Thanks in advance. Meghz

Read other answers
RELEVANCY SCORE 47.2

After using two finger scrolling, I lift 1 finger up so I can use the mouse pointer but for a second it continues to scroll instead of being able to use the pointer. Anyone have this issue?

Read other answers
RELEVANCY SCORE 46.8

Hello everybody, I bought recently lenovo yoga c930. The touchscreen only working with my finger and doesn't recognize my pen . I tried to configure the stylus but i can't appair it . Can someone help me to fix this issue?

Read other answers
RELEVANCY SCORE 46.8

Hello everybody, I bought recently lenovo yoga c930. The touchscreen only working with my finger and doesn't recognize my pen . I tried to configure the stylus but i can't appair it . Can someone help me to fix this issue?

Read other answers
RELEVANCY SCORE 46.4

I'm on a Helix (Type 3xxx) Laptop (ThinkPad) Machine Type 37011D7 running Windows 10.  I've had some issues with consistently using my finger on this helix screen. Is there some trick to using it? Or enabling it? There are times I can use my finger to scroll a web page, move the mouse pointer, or click the windows button, etc. then there are times my finger does nothing when I touch the screen. I'm not sure if there is something wrong with the machine, or I'm simply missing some option. Ive recently run the lenovo update tool to get everything up to the latest drivers, and OS updates too. Thanks for your suggestions.  

Read other answers
RELEVANCY SCORE 46.4

Hello I'm Using Lenovo Yoga 720-15For a year or so everything was great, but for the last month my touch screen won't respond for finger input - the stylus works fine. I've tried every solution possible online. Did someone had this problem and managed a repair? Thank you!

Read other answers
RELEVANCY SCORE 46

My touch screen stopped working for fingers but pen is still working.  Tried to disable touch screen in HID (Device manager) - no luck Everything seems to be up to date except Intel SGX which I unsuccessfully tried to update through Lenovo Vantage. Don't know if it matters. Help Please!

Read other answers
RELEVANCY SCORE 45.6

Guys the worst Touch Screen i have ever seen in a Laptop, STYLUS is working fine but with finger sometimes screen recognizes & sometimes it does not. I have contacted customer care, visited service centre & even 2 times reset the laptop to factory settings but it does  not work. If someone have solution please suggest otherwise help others also not to buy lenovo or thinkpad touch screen laptops, they are the most worst laptops in the world.  My laptop worked very good for 2 months, i just purchased it in September 2018 but after that its touch is not working properly. I had updated my laptop softwares from Lenovo Vantage also.

Read other answers
RELEVANCY SCORE 45.6

I'm befuddled. Two finger scrolling in Windows 10 dialogs, applications and Internet Explorer/Edge all works perfectly. However, Chrome is far too sensitive and the page blazes past. I can't adjust the scroll speed in settings because that affects all other apps (in other words they'll become way too slow!) Just to make matters more confused I've also got a Logitech mouse and the scroll wheel works fine everywhere - and this means if I install an extension in Chrome to configure scroll speed to work with the touchpad I will have slowed it down to a painful rate using the scroll wheel. Any clues how to configure Chrome two finger scrolling correctly? Is this an issue with the trackpad or Chrome?

Read other answers
RELEVANCY SCORE 45.6

I have searched a few hours for possible solutions and also installed the "touch firmware update." I have disabled and enable HID touch screen. They did not work. The touch screen with finger stopped a couple of days ago. Why the pen still works? How do fingers and pen work differently? Anything else I should try to make it work?  Thank you!

Read other answers
RELEVANCY SCORE 45.6

I bought recently lenovo yoga 720, the touchscreen was working using my finger but it stopped and now its only responding to my active pen only. I tried to reset my computer settings and still it didn't work. can someone help me to fix this issue? thank you

Read other answers
RELEVANCY SCORE 45.6

Hello,Yesterday my touch screen in my Lenovo Yoga 720 stopped working with finger touch. It, however, still works with pen.I've tried to disable/uninstall HID driver, updating Windows, updating Lenovo with Service Brigde, safe boating, normal booting Windows nothing helped.Could you please provide me some sort of advice how to turn on my touch screen again? It is a laptop I've bought 3 months ago and I need to rely on it.Many thanks

Read other answers
RELEVANCY SCORE 44.8

I have a 1 year old Lenovo 750 15IKB. Touch screen stopped working a week ago so I cannot use my finger to work on it. The pen works well. I have tried everything possible. A couple of days ago the HID Compliant Touch screen disappeared from the Device Manager. Does anybody have a solution for this?  Thanks 

Read other answers
RELEVANCY SCORE 44.8

Hi mates,i hope you doing well i have some issue in my pc netbook thinkpad x201 when i installed driver i get black screen since windows 7  log in i try to uninstall driver from safe mode and networking windows start with normal mode without graphics card driver without brightness control i try to install all driver that has compatibale with hardware material    

Read other answers
RELEVANCY SCORE 39.6

Yoga thinkpad 20cd. I have the original stylus that came with the lap top as well as an aftermarket LIfebook stylus. The screen doesn't register either stylus. When i go to the windows pen calibration the stylus works fine. The calibration consists of tapping targets with the stylus pen. It is very accurate. Soon as i close the calibration window the stylus doesn't interact with the screen at all. I assume I must have changed some setting by accident or it occurred with an update. The stylus use to work a few months ago. I have tried messing with my display settings to remove the adaptive brightness at one point and may have selected a wrong setting. Thank you for any help provided. 













Solved!

Go to Solution.

A:Touch screen not responding to stylus only finger. But in stylus calibration, the stylus works fine.

SOLVEDOpened Wacom Pen and restored to default settings. started working again. Never have opened Wacom pen before, not sure why that worked. 

Read other 1 answers
RELEVANCY SCORE 37.6

HiI want to migrate from x201 to x230. It turns out, however, that the ssd I have, which is crucial mx300 has two metal parts sticking out that make it impossible to insert the disk. Can anything be done about it at all or will I need a new ssd for x230?Would x220 be incompatible with the ssd, too?

Read other answers
RELEVANCY SCORE 37.6

Has anyone got windows 10 anniversary update to run ok on a Thinkpad X201?

Read other answers
RELEVANCY SCORE 37.6

hi, i just purchased new RAMs for my X201 previously it had 2GB DDR3 1066Mhz PC3-8500 SO-DIMM Memory ( Samsung ) i purchased Kingston 2x 4GB DDR3 1333Mhz  PC3-10600 SO-DIMM Memory . i installed new RAMs but windows ( also ubuntu with dual-boot ) didnt start. i tried each rams also each slots. when i install both of the 2 rams together, OS doesnt boot, just freezes while booting ( for windows 7 it freezes when it says " windows is starting " , in ubuntu it cant boot, instead it restarts again and again ) when i try just one 4gb ram for 1 slot , it is giving Blue Screen Of Death error at boot screen ( in windows 7 when we see colored booting window flag it freezes for a second then blue screen )  after all of these , i uninstalled my old laptops 1066 mhz 2GB ram ( same with the previous ram of x201 ) and installed it into x201. it worked.  so slots dont have any problem.. it seems rams having issue. My X201 Type number is : 3626-FBG Kingston RAMs  details : on cover it written: KVR13S9S8/44GB PC3-10600 CL9 204-Pin SODIMM207767C2C20000006549306004 Any idea why is it happening?  




ThinkPad X201 3680-AD6 / Intel Core i5 M560 2.67Ghz / DDR3 8GB / Intel SSD 730 Series 240GB / 12.1 WXGA 1280x800px / Dual boot Win10 Pro x64 - Ubuntu 14.04 LTS 64bit + X200 Ultrabase + ThinkVision L2250pwd

A:X201 RAM Upgrade

Hi,one reason of issue might be the frequencies of new RAM sticks and CPU i5-520M in your laptop. That processor supports DDR3-800/1066 memory types only. Who knows how SPD feature on the stick regulates the work on lower frequency. Another reasons might be the RAM sticks CAS latency and timings. There is a chance the new memory is too fast for x201. Look at the such parameters of Samsung stick (in CPU-Z, for example).

Read other 9 answers
RELEVANCY SCORE 37.6

My local MicroCenter has a refurbished X201 (open box) for $120...Windows 7 Pro, 4 GB RAM, 128GB SSD...not sure if its the tablet version or not (says X201 without the "T"), but pics show a tablet version. Just wondering if people would still recommend this as a good deal? Thanks!

Read other answers
RELEVANCY SCORE 37.6

I have a X201 thinkpad that I am trying to update a bit.  I purchased a new samsung evo 860 500gb ssd drive.  I tried to put fresh install of win 10 onto it (boot from usb stick) but was getting media test failure errors and constant restart loop. I took the ssd out and put it into my even more ancient X61s and managed to load windows onto the drive with no problems.  The ssd runs fine in the X61s.  On the X201 I updated the bios to the latest version (1.40).  I tried to put the ssd into the computer but it just keeps loading the window symbol, saying preparing to repair and then it reboots.  What am I missing here?  I compared the bios settings on the 2 computers and they looked the same for most options? Thanks for any help Unrelated question, should I update bios of X61s?  What would be most recent version?

Read other answers
RELEVANCY SCORE 37.6

I have a Thinkpad X201  running Windows 10. It has an Intel Ultimate N 6300 AGN wireless adapter. My router is a Linknsys E1200. The router is "n" compatable, works great in n mode on my HP and my MAC Book. My Thinkpad will not connect in n mode. Windows say "can't connect". It connects fine in 802.11g mode just runs slowly only 22 mps.In properties for the N6300 I have 802.11n mode enabled. 802.11n channels set to auto. I have my wireless secuity set to WPA2/personal. WMM disabled.Has anyone else had this problem? Any help? 

Read other answers
RELEVANCY SCORE 37.6

Hi, i am wondering if my X201 supports DDR4 rams? current system is 3626-FBG and i5 520M 2.4 ghz  any comment or advise is appreciated thanks  





ThinkPad X201 3680-AD6 / Intel Core i5 M560 2.67Ghz / DDR3 8GB / Intel SSD 730 Series 240GB / 12.1 WXGA 1280x800p / Dual boot Win10 Pro x64 - Ubuntu 16.04 LTS 64bit + X200 Ultrabase + ThinkVision LT2252p

A:X201 - DDR4 RAM ?

Simply, no.
 
DDR4 is physically different from DDR3.

Read other 1 answers
RELEVANCY SCORE 37.6

Dear all, I'm trying to connect an old but good x201 (2.4 Ghz M520) to a FullHD LED Monitor via VGA. Computer recognizes that something is going on but I get no signal in the LED TV. Does it support LED Monitor? Thank you

Read other answers
RELEVANCY SCORE 37.6

When booting my x201 I get fan error on screen. If I press escape it continues to boot to windows but begins to get quite hot quickly. What component needs to be replaced and how difficult is it?

A:x201 fan error

This forum is for the tablet, not the notebook.  It is the fan. (running too slowly).  You need to remove the motherboard to get at it.  The fan is mounted on the underside.
 
Manual: https://download.lenovo.com/pccbbs/mobiles_pdf/45n3683_04.pdf
 

Read other 1 answers
RELEVANCY SCORE 37.6

i5 [email protected] 10 64 Pro SSD Which 128GB SD card would be good for permanent use in SD slot?What specs would be best for R/W speed?   

Read other answers
RELEVANCY SCORE 37.6

Dear all,
I am encountering strange behaviour from my newly purchased NB from Lenovo.
Every morning when I first start my nb will enter into BSOD screen during start up, but once I restart it the system become very stable no matter how many time I restart or boot the system for rest of the day.

Could someone help me on the problem? If it is hardware problem I would better get back to vendor with in this month.


Lenovo Thinkpad X201
Windows 7 Professional
-X64
-No Preloaded OS
-Full Retail Version from MSDN
-Just bought the NB within a month

Best regards,
Peter

A:Lenovo X201

Dear all,
My note book hang again this afternoon, after I remove and reinsert the memory module. Please help or comments on my issue.

Peter

Read other 2 answers
RELEVANCY SCORE 37.6

Hi All, Have one of these PSUs (20Vdc round connector), and it has stopped working, and the module rattles when shaken. Can anyone advise how to access, so I can see if simple fix, or need to purchase a replacement... Doesn't appear to be any obvious access (screws under voltage label, etc.)  Thanks, Dave

Read other answers
RELEVANCY SCORE 37.6

Hi, Is it possible to install an SSD flash drive on X201 tablet? If yes, which type? SATA3, PCIe etc... and where to buy? Thanks in advance.

Read other answers
RELEVANCY SCORE 37.2

I am posting this in case it is of use to others:I have a refurbished X201 which worked OK when I got it but now the loudspeakers have stopped working.  The headphone jack output is OK.I dismantled the machine and discovered that there was a "fur" of steel filing particles around the cones of both loudspeakers (the speakers are located just inside the front edge of the machine adjacent to the lid catch).   Blowing out the filings with compressed air (away from the laptop!) fixed the problem completely.   [Amazing how completely a small deposit of filings can stop the speaker operation.]I have now glued in place thin gauze across the small grills below the speakers to stop any further ingress.  So be aware that the speaker magnets can draw up iron swarf through the grill holes if you are using the tablet in a workshop environment.Hope this is of use to others.

Read other answers
RELEVANCY SCORE 37.2

My local MicroCenter has a refurbished X201 (open box) for $120...Windows 7 Pro, 4 GB RAM, 128GB SSD...not sure if its the tablet version or not (says X201 without the "T"), but pics show a tablet version. Just wondering if people would still recommend this as a good deal? Thanks!

Read other answers
RELEVANCY SCORE 37.2

Hi everyone, I'd like to order a X201 model online, but my situation is a bit complicated...I reside in Singapore and have a friend studying in a US university, is it possible to ask him to buy for me using my own Singapore Credit card?

A:X201 Education price

lenovo don't accept international credit card, maybe you should wire the money to his account instead. 

Read other 2 answers
RELEVANCY SCORE 37.2

I have to install a Windows OS on the new SSD of my X201 (Product ID: 3680N22). The product Key of the bottom label corresponds to Win7 Professional OEM.73HF6-4D4HC-X943M-DQ692-26897 I tried to download the ISO files from Microsoft site, but only got the following text: "ErrorThe product key you entered appears to be for software pre-installed by the device manufacturer. Please contact the device manufacturer for software recovery options." how can I get the ISO files?

Read other answers