Over 1 million tech questions and answers.

Wireless adapter for T440p

Q: Wireless adapter for T440p

Hi, I have a Thinkpad T440p and trying to install an AC wifi card. Getting the 1802 unauthorized card error. The new card is an Intel 7265NGW. I have read that only Lenovo branded cards are compatible. Anyone know a workaround for this or where I can purchase the correct card? Thanks

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Wireless adapter for T440p

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 74

My T440p wireless adapter cannot well connect to weak or normal signal. I sent it back to fix it. However, little improved. Any suggestion? Same signal, my old T61p can well connect to the same weak or normal signal without any disconnection. However, T440p has this problems time to time.T440p has been upgraded to Windows10. This issue exists all time.T61p has been upgraded from Vista to Windows 7 pro.

Read other answers
RELEVANCY SCORE 58.4

Hi all, A few days ago, the rectangular plug on my old charger finally separated from the cable, marking the end of an era in laptop power supplies. Having used third-party adapters before with good results, I ordered Elecbrain's 90W slim-tip adapter as a replacement off of Amazon. The new adapter charges my computer, but sometimes (maybe about 1 out of 3 or 4 times) fails to charge effectively ("plugged in, not charging"). I often have to wiggle the computer end of the plug in the port a bit to get it to charge at all; it's also much harder to insert the plug into the computer than any of my previous cables. 1) Has anyone had any negative experiences with the Elecbrain adapter, and 2) in the likely event that I return the Elecbrain adapter, there any difference between these three official Lenovo adapters: 0B46994, 888015012, 4X20E75140? One of them is not labeled as "slim tip" and one of them is for the ThinkCentre instead of the ThinkPad, but the thumbnails all look identical. My machine is a Thinkpad T440P purchased in late 2015, model number 20AN006NUS.

Read other answers
RELEVANCY SCORE 57.6

I have a T440p with an optical drive.  Will a hard drive installed in an adapter in that bay perform at the same rate as the primary internal hdd? Thanks! 










Solved!
Go to Solution.

A:T440p adapter for 2nd hard drive?

Yes, but think carefully before you commit to that, especially if you want to use a platter drive and not an SSD. HDD in the optical bay have two downsides:1.  They make noise.2.  They make heat. There's no efficient way to exhaust waste heat from that bay and it will come up through the keyboard. Better idea:  get a large SSD and keep the optical drive.

Read other 2 answers
RELEVANCY SCORE 57.6

Hello i installed the driver for lenovo LAN and WLAN all the three intel, realtekk and  thinkpad wireless driver i also have the intel proset driver software. But my wireless adapter does not show in network adapter. I am using internet via LAN. OS: window 7

Read other answers
RELEVANCY SCORE 57.2

So, my two 170w AC adapters for my P51 arrived yesterday from Lenovo.  I grabbed one of them this morning and headed to work - only to discover upon my arrival that the adapters do not include the power cords. I have three adapters and cords for a T440p.  Will these power cords work with the P51 adapter? (On the bright side, I only have 3h:10m left in my work day today...)  

Read other answers
RELEVANCY SCORE 55.2

Seems the Realtek 2x2 11bgn Wirelss **bleep** M2 Adapter that came with the T440P cannot work with 5Ghz ? I have seen articles claiming that the card cannot be replaced and others suggesting it can (but only if on a Whitelist ?).  Anybody know the answer to this? And assuming I can change the card, any recommendations ?   

Read other answers
RELEVANCY SCORE 53.6

I just picked up a t440p, and I am hoping to do some upgrades on it.  I got a Transcend 512 GB SSD for the M.2 slot.   It installs just fine, and Windows 10 sees the drive.  The only issue is that when the M.2 SSD is installed, there is no wireless adapter in the system.  When I remove the M.2 SSD, the wireless adapters are back. Is it not possible to have both in the system and functional?  I am hoping to make the M.2 SSD the OS drive, and use the other SSD drives (2.5") for storage. 

Read other answers
RELEVANCY SCORE 52.8

I wanted to know if I can use this Card to replace my standard card? Intel Wireless-Ac 9260, 2230, 2X2 Ac+Bt, Gigabit, No Vpro or does someone know a better one ? My card I am using atm is  Intel(R) Dual Band Wireless-AC 7260. Any help would be great. Thanks

Read other answers
RELEVANCY SCORE 52

I have a T440p with Windows 10 Pro and have no problem with Wake on LAN (WoL) with an ethernet cord plugged, but have been unable to get Wake on Wireless LAN (WoWLAN) to work. It has the Intel Dual Band Wireless-AC 7260 which does support WoWLAN and I've got the appropriate settings for the wireless adapter selected.  When I posted on the Intel board, they said that WoWLAN support is also dependent on support from the motherboard and suggested I check with Lenovo. Has anyone had any success getting WoWLAN to work?

Read other answers
RELEVANCY SCORE 48

Hello, I would love to ask for some help!
I've recently purchased the newer Dell XPS 13 9360 Non-touch (not the 2 in 1) and am having some trouble with using an external monitor. The screen (on the external monitor) keeps on flickering and has a very unstable connection. 
I've searched and found that apparently lowering the power output of the WIFI network adapter can fix this problem. 
The problem is that the current XPS's wifi adapter doesn't allow the power output to be changed. The previous fixes were geared towards intel wifi adapters.
The general power settings for the computers doesn't show wifi card power controls.

I have updated all the drivers for the computer including the wireless adapter. Still the options doesn't change.

Has anyone found a way to get a stable external monitor to work with the Killer Wireless Adapter cards?
Any help would be greatly appreciated!
-JDed

A:XPS 13 9360 External Monitor Flicker with USB C - HDMI Adapter [Killer Wireless Adapter]

For what it's worth: For me (XPS 13 9360, QHD, i7, 16 GB, Killer WiFi), external screens are perfectly stable, even with wireless being on relatively high throughput load, albeit not high power (energy) load.
I am connecting both HDMI and DisplayPort displays, each with cheap native USB-C adapters (i.e. through Thunderbolt). I also have full success with a Dell DA200, through its built-in HDMI graphics adapter.

Read other 2 answers
RELEVANCY SCORE 48

how do i get these to work together one computer has the qwest modem the other the usb and i want to have a wireless connection for internet but they dont connect and see eache other
 

A:Solved: Bluetooth 2.0 usb adapter class 1 and qwest wireless modem w1000 adapter

Does the bluetooth adapter recognise the modem but can't connect?
 

Read other 2 answers
RELEVANCY SCORE 48

Hey,
I have two problems so i will explain the scenario then number out the issue. I had a new hard drive installed, when i booted the laptop, it worked well. The wifi in my area is very low so I was told I can use a wireless adpter to "boost" the signal strength received. I was given a Encore ENUWI-N3 Wireless Adapter to use. I installed the utility program from the official website and the computer still did not recognise the device, so I deleted the program. I then lost connection to the internet, and at the time i thought the wifi can dropped (i later realised that was not the case since my phone's wifi was still connected). I then reinstalled the software ( the executible file was saved on the harddrive), and it give me the same message that there are no drivers for the adapter.

I shifted my attention to my failed internet connection, after troubleshooting it give me a error 28 message stating that there were no drivers installed for the Broadcom wireless adapter that is internally installed. I tried a system restore to before i tried installing the Encore adapter, and still nothing, the system continued to give me the same message and it registered in the "device manager" as unknown device named "ethernet controller" with a yellow triangle with an exclamation mark. I have been able to borrow a laptop and download the LAN adapter fron the ACER support website, and although it had no "set up.exe" file visible i was able to get... Read more

A:Encore ENUWI-N3 Wireless Adapter plus internal broadcom adapter issues

What is the purpose of all those links at the end of your post?

What is listed in Device Manager under Network Adapters?

What, if any, warnings or errors (yellow or red) flags are anywhere in Device Manager?

While trying to connect by both ethernet and Wi-Fi ...

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If you need help with that see TSG Posting a Screenshot. FWIW to take screen shots with Windows 7 or Vista I prefer to use the built-in Snipping Tool.

Also show ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 1 answers
RELEVANCY SCORE 48

I have a printer (with wireless capability) wired to desktop (Windows XP) and a wireless laptop (Windows 7). My question is, can the printer be connected wirelessly to the laptop as well as wired to the desktop, or does everything have to be wireless?
Another question: If I want to share files between the two computers, do they both have to be the same operating system? (one is Windows XP and the other is Windows 7)
 

A:Solved: Wireless Laptop/Wireless Desktop (via wireless adapter)/ printer

I would guess that the printer can be connected by ethernet and wireless, but I've never had one with both capabilities so I don't really know.

I once had a printer that worked OK connected to a network plus connected to another computer by USB. Even so, that may depend on the particular printer.

There may be two operating systems that cannot file share with each other but I don't know which ones that might be. Windows XP and 7 are fine sharing with each other (but not claiming that nobody has had any problems).
 

Read other 2 answers
RELEVANCY SCORE 47.6

Hi, 

I have this laptop and it comes with a 2.4ghz wireless adapter. I see in the specs that it can come with a 5ghz ac adapter as well. I would like to upgrade it to the 5ghz adapter.
http://downloads.dell.com/manuals/all-products/esuprt_laptop/esuprt_inspiron_laptop/inspiron-14-3452-laptop_reference%20guide_en-us.pdf
If someone could tell me which model adapter that is so I know that it is compatible before I buy it.
Thank you!

Read other answers
RELEVANCY SCORE 47.2

HI All...

i have a laptop

working withe win7 pro

and the Ethernet adapter and a wireless adapter disabled together in the same time until i restart the laptop

i format the laptop
and download the driver and install it in the laptop

and it disabled again

help please

A:[SOLVED] ethernet adapter and a wireless adapter disabled

What brand and model is the laptop?

Read other 5 answers
RELEVANCY SCORE 47.2

Hi,

thanks for looking in and trying to help. I have a laptop with Windows 7 on it, and as usual today the laptop's screen frame also accomodates the internal Wireless Internet antenna. I am able to use the existing networks when they are close enough to me.

But I wanted to have a better reception, so I bought one of those USB-based Wireless Internet Adapters (WIA) which have mounted a little 5 dBi antenna (dBi = Decibel) on its side. I bought recently a much larger 22 dBi antenna, which I can use to replace the smaller antenna on that WIA. Windows also recognized the USB device correctly (please see the screenshot link: http://www.NADB.net/v/Prom/WLAN.jpg), but the connection tool at the lower right side of Windows (system tray area) displays only those networks which the internal screen frame antenna captures.

I tried already to disable the internal antenna, but then I don't get any network. Why can't the Network Connection icon not show networks the USB WIA might capture? What is it I am doing wrong?

Please don't mind to ask me for additional details here, I will provide them as additional details.
 

A:Laptop: Wireless Internet Adapter: Windows 7: Can't use the adapter. Why?

Read other 11 answers
RELEVANCY SCORE 47.2

Hello, this problem has really confuzzled me. I have just bought a new wireless USB adapter, ran it through the setup entered the password etc. Fine. Nicely connects to the router everytime (well ok most the time). But it cant seem to find the internet, which i know is there because my house mate has no problems with it. I've read quite a few complaints about this adapter. Is it worth just returning it and trying a different one? Or does anyone have any ideas?

It finds the submask, ip address, sets a channel automatically. One thing i noticed though is it doesnt create a gateway. (i asume cos i cant find the net). I did have internet before but they were wired. I've since then disabled the normal ethernet adapter and disabled the old connections. So i dont think theres anything conflicting.

Please help?!!
Thank you in advance i really appreciate it.
 

A:Belkin Wireless adapter - can connect to the adapter, but not the internet!!!

I'm going to guess that the IP address that it finds is 169.254.x.x and the subnet mask is 255.255.0.0, right? It's really NOT connecting to the router, which is why you don't have a Default Gateway or DNS servers.

You don't have to disable the wired interface to connect wirelessly, there's no conflict.

I'd suggest you first disable the encryption and see if it connects. If it does, then you need to make sure you enter matching passwords for the encryption on each end. Note that for WEP you should ONLY use the HEX password, do not use the passcode option.
Please supply the following info, exact make and models of the equipment please.

The name of your ISP and country of residence.
Make/model of the broadband modem. If dial-up, please specify.
Make/model of the router (if any).
Connection type, wired, wireless.
If wireless, encryption used, (WEP, WPA, WPA2, etc.)
Make/model of network card or wireless adapter.
Make/model of your computer (motherboard if home-built).
Version and patch level of Windows on all affected machines, i.e. XP-Home (or XP-Pro), SP2.
 

Read other 3 answers
RELEVANCY SCORE 46.4

I'm not totally computer-literate when it comes to hardware and such, but I am fairly literate with most computer terms. So in advance, I apologize for any confusion a misused hardware name may cause.

Also, before I begin, let me just say that the issues hereafter discussed apply to a computer separate from this one. This computer works fine, but the one I will be talking about, my computer, is the one without an internet connection at the moment.

So recently, my network adapter decided to stop working. I won't go into the details, but it's completely fried, and I'd much rather spend the money to get a new one instead of go through the hassel of trying to fix my old one. And thus we come to question number one:

Do most (if not all) network adapter cards work with most PCs? I have a Dell Dimension 4500 with Windows XP Home edition with highspeed cable internet, so would pretty much any network adapter do the job? My stepdad, who is fairly computer-literate (though often too cocky about it) says that pretty much all network adapters will work with any computer, unless the computer and network adapter are old or new, respectively. Also, what are the most reliable brands of network adapters? What kind of details about the product should I look for when purchasing?

Now on to the second part of my post: wireless internet adapter. For a while, my computer has been a few feet from the router because we had/have no way for a cord to reach anywhere else, particu... Read more

A:Network Adapter/Wireless Adapter compatability

Read other 13 answers
RELEVANCY SCORE 45.2

So, I've been using Ethernet for a while now to access the internet on my PC. I never really use it because I'm always using wireless, but few months back my wireless just suddenly stopped working so I've been using an Ethernet cable ever since.

Anyway, I wanna get back to using wireless but the problem is: I don't know how. I have no wireless adapters and no wireless option to set up a new wireless connection.

I go into: Control Panel\Network and Internet\Network and Sharing Center > Set up a New Connection or Network > Connect to the Internet > But, the only option I get are Broadband (PPPoE) or Dial-Up. Shouldn't a wireless option be here?

I then look to: Control Panel\Network and Internet\Network Connections but there's only one icon there: Local Area Connection and that's my Ethernet cable which I'm using right now. Shouldn't there be a lot more here?

I've gone into Device Manager and checked my Network adapters but there's only one: Realtek PCIe GBE Family Controller. My other PC (literally, the exact same PC to this one) in the room next door works fine and has got a bunch of other adapters, I have no idea what's happened to this.

Yeah, I'm a newbie to this. Basically, I want to start using a wireless connection but I have no idea how.

A:How do I change to wireless? No wireless option, no wireless adapter

What is the make and model of the PC? Is it a laptop? Is there by any chance a switch that turns the wifi on/off?

If the wifi worked in the past and suddenly stopped working, I would suspect that the adapter failed but it could also be switched off or the driver got corrupted or otherwise disabled somehow.

Read other 9 answers
RELEVANCY SCORE 44.8

Hello,

I have a laptop dell xps M1210 with Intel(R) PROSet 3495 ABG. It has been working well for several years.

Yesterday morning I got an error: "Problem applying profile", then it couldn't been connected.

I did a lot of things.
1) Update the driver from 10.5 to version 12.1
2) Make sure "Wireless Zero Configuration" service started.
3) Uninstall the wireless adapter and reinstall it.
4) reboot the machine.
....

It is not working today. The error becomes "Intel(R) PROSet/Wireless Software was unable to detect a supported wireless adapter.".
By checking the device manager for connectivity, everything looks good.

One thing I must mention is sometimes I got an error that is "Microsoft Help and Support Center has encountered a problem and needs to close...."

The detail is Error signature
AppName:helpctr.exe AppVer: 5.1.2600.5512 ModName: ntdll.dll
ModVer: 5.1.2600.5512 Offset: 0000100b.

I am frustered but I don't want to reinstall windows system.
My OS is win xp pro sp3.

Thanks for your reading and help.
 

A:Intel(R) PROSet/Wireless Software was unable to detect a supported wireless adapter.

Read other 14 answers
RELEVANCY SCORE 44.8

i have an acer laptop and recently updated my computer with th latest intel pro/wireless software. and this is what happened.

When I right click on the Wireless icon -everything is greyed out except for
OPEN INTEL PROset WIRELESS and OPEN INTEL WIRELESS TROUBLESHOOTER.
- When I click the Troubleshooter the message is CURRENTLY THERE ARE NO
ISSUES REPORTED.
-When I click on OPEN Intel proset Wireless the pop says Intel
PROset/Wireless was unable to detect a supported wireless adapter. Pls.
install a supported wireless adapter.

* If I go to drivers and look at Network Adapters - it shows Intel
PRO/Wireless 2200BG Network Connection in green but if I right click it, I
see a pop-up that says ADAPTER STATE NOT FOUND IN REGISTRY. If I click OK
button on the pop up, it shows a window with 5 tabs( General,
Advanced,Driver, Details, Resources) - In the general category its says"
This device is working properly" and the Device usage shows Device enabled.


i uninstalled both the drivers and the sofware and reverted to the old one but to no success.
after doin a lot of research i have to come to know a piece of program that tells me that i have 3 wireless adapters. probably the duplicates? but how do i remove them and make my wireless right

A:Intel PROset/Wireless was unable to detect a supported wireless adapter. Pls. install

its an intel pro/wireless 2200BG

Read other 5 answers
RELEVANCY SCORE 44.8

Hello!

I will start this off by freely admitting I'm not great with computers and usually don't know what I'm talking about.

I have an Acer Aspire 4720Z laptop.
I recently wiped it clean and installed Windows XP, and have not been able to connect to wireless internet ever since.
I used the Acer website to download the drivers, extracted all the files, etc.

When I open Intel PROSet/Wireless, I get an error message that it is "unable to detect a supported wireless adapter. Please install a supported adapter."

Also, Intel PROSet/Wireless does not appear on my Device Manager. (The only things that are listed under "Network adapters" is 1394 Net Adapter and Broadcom Netlink Gigabit Ethernet.) I feel like that's probably part of the problem, even if I'm not sure why, haha.

What can I do to get my wireless access back?

Thank you.
 

A:Intel PROSet/Wireless unable to detect a supported wireless adapter

Read other 6 answers
RELEVANCY SCORE 44.8

I have been experiencing wireless wifi connection problems with my HP Pavilion dv6000 laptop. I am running xppro (I went from vista to xp pro..took a long time as I am slow) Anyway, I read that you can add another wireless network card as a work around, in the event that the internal wireless card breaks/dies.

I bought a BelkinWirelss G USB network adapter- F5D7050 and tried to install it on this laptop. I was able to install it on my IBM T23 and Gateway laptop. I had to disable the radio on the gateway before it worked. The IBM is old and has no built in wireless card. ON my HP pavilion dv6000, I slid the wireless button to disable and also went into device manager and disable there too.

For some reason after loading the Belkin in, it does not find any wireless networks. I called Belkin and spoke with their help desk but they were not helpful. My question, short of disabling my HP wireless card, do I have to remove the actual software (uninstall broadcom ) so the computer will look only at the belkin software?

My HP laptop, warrantied expired 2 months ago. Any help would be appreciated..
 

Read other answers
RELEVANCY SCORE 44.8

Hey guys, need some urgent help here.

I have a program on my computer called Intel(R) My WiFi Technology, which has something to do with my network adapter (Intel (R) WiFi Link 1000 BGN). I recently had an annoying notice popping up from this program saying 'The Wireless Network Adaptoor could not be found'. So I decided that I should find a solution on Intel's forums. I came across a thread that discussed my problem, and one of the Intel workers mentioned that Uninstalling and Reinstalling the program would be the best solution. So I followed the steps and came across a huge problem . Turns out that once I removed this program, my computer wouldn't connect to my wireless network in my house. I went onto my other devices throughout the home and they all seemed to be working fine, and that my router was still working fine aswell. I went onto my other computer and downloaded the program onto my USB, and installed it back onto my original computer. There still wasn't any difference, and my computer still currently can't connect to my wireless access point. I've rolled back drivers, updated them, and I've refreshed wireless network adapters in my Network and Sharing Center in Control Point. I'm starting to run out of ideas, and I really need some help. My computer can still detect networks though, but I've discovered it can connect to my Mobile Phone's Access Point, meaning I can connect to 3G through my phone. I'm sus... Read more

A:Uninstalled/Reinstalled Wireless Network Adapter - Can't connect to Wireless Router

Make sure you have the latest wireless driver from your laptop manufacturer's web site.

Delete all wireless profiles. Then try again to connect.

Please attach a screen shot of the Networks page of the Xirrus Wi-Fi Inspector and show ...

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 1 answers
RELEVANCY SCORE 44.8

Hi. I have an IBM T40 Thinkpad laptop running Windows XP with CISCO Aironet Client Utility installed to manage my wireless networks. I don't understand the point of this utility as I find the Windows XP wireless connection management more reliable and straightforward, but I don't know how to disable this thing. I would if I could and I have tried, although not that hard.

Anyway, I was using the CISO Aironet Client Utility (or whatever it's called) fine, then I visited a friend's house and needed to get on his network. He started poking around and one day it was working and the next it was broken. It kept saying it couldn't find a radio signal or that it was off. I came home and it wasn't working for a month or so.

One day, I messed around with it and it started working again. Only problem now is whenever I shut down my laptop and re-open it, it never reconnects to my wireless connection automatically. I always have to do it by hand.

Any suggestions here? How can I get it to reconnect automatically and if I can't, how can I get it to use the Windows wireless features that are built in and bypass this CISCO stuff?

Thanks!
 

A:CISCO PCI Wireless LAN Adapter (Aironet) Won't Auto-Connect to Wireless Network

i'll move to netwroking you should get a better response
 

Read other 1 answers
RELEVANCY SCORE 44.8

I've been using my USB adapter for quite awhile now and decided to go back to my laptop's wireless adapter and when i did it refuses to connect to my Internet.
 
I try diagnostics but it says there is no problems but it would keep verifying if the network diagnostics service is active. However it is functioning but still doesn't find a reason to why my internal adapter isn't connecting to the Internet.
 
Could it be that my laptop's network adapter is not functioning? 

A:my wireless adapter won't connect but my usb adapter can

Did you check your wireless settings to make sure the device is enabled?Control Panel/Network and Sharing Center/Change adapter settings which is on the upper left side of the page.What does it say for the laptop's built in wireless adapter?To answer your question, yes it is possible that it's "broken" and will not work.

Read other 10 answers
RELEVANCY SCORE 44.8

Nowadays, wireless router is a basic device at home because wireless access point (AP) is required. Sometime, a wireless repeater is also needed in a big house especially that with a big yard. Actually, without wireless router, only a Windows 7 laptop can be turned into a WiFi hotpot or a wireless repeater. Many discussions can be found online regarding how to turn Windows 7 laptop into a WiFi AP or virtual WIFI hotpot, however, the internet surfing is based on a local area connection. If wanna extend a WIFI signal to an enhanced new wireless AP, generally two wireless adapters are considered.

Here, differently, with only one wireless adapter but without 3rd-party software, we can setup a wireless repeater in a Windows 7 Home Basic or Home Premium laptop with only one wireless adapter. This can boost the wireless signal to smartphones, tablet computers, or other wireless devices. Also, the mobility and flexibility allow extending the signal to a yard or a garage conveniently as you want.

It is known that a virtual wireless adapter can be created with a third party software or only Windows 7 built-in commands. But in Windows 7 Home Basic or Home Premium, usually the virtual wireless adapter cannot be created or a hosted network cannot be started. I found a specific approach to clear the issues.

We can follow the steps (successful setup in my two Windows 7 Home laptops),

1. Click Start, point to All Programs, click Accessories, right-click Command Prompt, and th... Read more

A:Turn Windows 7 Laptop into Wireless Repeater with One Wireless Adapter

This method is available for starting soft AP of Windows 7 Home Premium laptop when set up repeater, some third party softwares or methods can create soft AP for Windows 7 Professional or Ultimate only.

Read other 9 answers
RELEVANCY SCORE 44.8

Hello TSG Forums,

I've got quite the challenge for you guys. I've gone through two different tech support lines, three computer savvy friends, and every troubleshooting trick and tip I could scour off of the internet. All efforts have been in vain thus far. So as to not make this post too long, I'll get to the point.

I recently bought a new wireless adapter to connect to the internet with. Previously I was using an older adapter that my room mate was lending me. ( a Motorola Wireless USB Adapter WU830G to be exact.) At first when I installed the motorola it didn't work. I can't remember what I did to make it work for the life of me, but I eventually twisted my computer's arm enough that it gave in. Now it's uninstalled from my computer, along with (I hope) all the drivers and programs that were using it.

So I bought a new adapter (Belkin Wireless G Plus MIMO USB Network Adapter - F5D9050) read the instructions carefully, and made sure that it was installed just as the manual says. (Install the software, wait for the prompt, etc etc.) Everything seemed to be going smoothly until I tried to configure my connections. (Where the wireless detects all the access points, and you put in your WEP key etc.) The wireless adapter seemed to be doing nothing. The device manager showed the adapter with no problems, and no errors, but the program was stubbornly pretending that my wireless adapter didn't exist. After trying multiple USB ports, uninst... Read more

A:Missing Wireless Network Icon; Wireless Adapter Not Working!

Read other 9 answers
RELEVANCY SCORE 44.8

Hi everyone: Iím having an extremely frustrating problem connecting to my Netgear DG384G v3 wireless router in my flat.

In short:

Ever since I reformatted my hard drive and reinstalled Windows XP Pro, internet browsers do not detect a connection to the internet despite a wireless connection being detected in the network connections (and the icon in the system tray) when my wireless adapter is plugged into my PC. Connection problems only occurred after the reformat, another PC in my flat connects wirelessly to our router with no problems (before, during & after the time I reformatted; Iím posting this using his PC) and the router config settings have definitely not been changed in any way so its not a router problem. It appears that the wireless adapter is able to detect a signal from the router but the router is not sending information to the adapter (I canít even connect to the router setup IP address 192.168.0.1)?

More detailed:

1) I wiped the PCís harddrive then reinstalled Windows XP Pro Ė I thought the recovery disk would have drivers with it (like others Iíd used) but it didnít so I had to manually find nVidia chipset & 3com Ethernet controller drivers and SP1 (for USB 2.0 functionality), download them on another PC and transfer and install them on mine. I got SP2, this didnít change anything, I changed back to SP1, still no change to connectivity.

2) When my Netgear WG111 v2 wireless adapter is plugged into a USB port, Windows recognises it as a d... Read more

A:Can't connect to net despite wireless adapter connecting to router's wireless network

Read other 16 answers
RELEVANCY SCORE 44.8

Dear all,

I thought I have met this problem before before my two wireless adapters both stopped working.

PCI-E INTEL 5300
TP-LINK WN821N

My case is a little different from those I found on this forum.

1. When I upgraded my thinkpad x200 to win7 64bit, I don't have "Wireless Network Connection", but I fixed it by stopping one setting of Kaspersky and it came back, so when I first found my PCI-E wireless didn't work, I thought the same thing happened, although I didn't remember the details, I tried the Kaspersky, don't work.

2. I updated the drivers, uninstall-install, start-stop-start WLAN AutoConfig... I have done a lot that can be searched on line, never worked for me.

3. Tragedy happened, I adjusted several common options on BIOS, then after several tries I made to make 5300 work, USB wireless died Don't know how to recover it, and back to my laptop again.

Could anyone here help me out? Really appreciate it! I have spent two days on this stuff, if no one can do this, I guess the only way is to reinstall the OS, that's the least thing I want to do.

Thanks!!!!!!!!!!!!

Mic

PS: Unavailable wireless adapters have all zero Mac addresses, also can't be found in control panel.

A:PCI-E intel 5300 wireless doesn't work. Then the USB wireless adapter

Problem solved. Thanks anyway.

Read other 2 answers
RELEVANCY SCORE 44.8

Opinion please: I have an hp pavilion laptop dv2000 and I am going to purchase either a wireless pc plug in module card or one that has a usb adapter.. would like opinions on which one is better for the long run.. I am looking at a Netgear one. both say compatible with windows xp which is what I have. and my router is a netgear already.
 

A:Solved: Wireless plug in module card vse wireless usb adapter

wireless module wouldn't work, ended up with the usb port adapter. Will try it tonight.. Wish me luck
 

Read other 1 answers
RELEVANCY SCORE 44.8

Mine is Dell Inspiron 3537, Os: Windows 7 Ultimate x64. My laptop wifi works fine for some period of time, but suddenly the current wireless connection gets disconnected and no wireless networks appear in the list. The network connection icon in taskbar changes to no network connection (small monitor with yellow exclamation icon). The wireless adapter is still enabled only.
Well i found a way to bring back the connection and to show the available wireless networks by disabling and enabling the dell wireless adapter under "change adapter settings" in Network and sharing center. But this problem keeps repeating at unpredictable intervals and i have to disable and enable the wireless adapter everytime!. Please help me with a solution.
I have already tried the following,
1. Re-installing,updating wireless network drivers.
2. Re-installing entire OS with full format of all hard drives.
3. Disabled (unchecked) "allow computer to turn off this device to save power" option under power management tab of dell wireless adapter properties.
4. Changed the power saving options for wireless adapter to "maximise perfomance" for both on battery and plugged in modes.
Having tried all these still no luck, the problem persists. I borrowed a digisol wireless USB adapter from my friend. this works fine all the time with no issues.
I have no idea why mine is not working properly. please do help.

Read other answers
RELEVANCY SCORE 44.8

I just installed a new TRENDnet Adapter 54Mbps 802.11g. It connects to the wireless internet and shows that the signal strenght is excellent (full bars) and it keeps on sending packets but receives no packet at all. I tried everything but its not working. When I try to "repair" the connection it takes for ever and then it shows an error like 'fail to obtain IP. Please contact your ISP.' It also shows many other wireless connections available around but same thing happens when I connect it to any of those connections. Please Help me in this regard. I am running Windows XP.
 

A:PCI wireless Adapter connects to the Wireless internet but does not receive packets.

Read other 7 answers
RELEVANCY SCORE 44.4

Hi there Can I upgrade the wireless network adapter on my Lenovo Yoga 700 14isk to a Intel Dual Band Wireless-AC 7265 ?. The orginal network adapter is a Intel Dual Band Wireless-AC 3165  Kind regards

Read other answers
RELEVANCY SCORE 44.4

Hi there Can I upgrade the wireless network adapter on my Lenovo Yoga 700 14isk to a Intel Dual Band Wireless-AC 7265 ?. The orginal network adapter is a Intel Dual Band Wireless-AC 3165  Kind regards

Read other answers
RELEVANCY SCORE 44.4

I got a new Linksys E2000 router a few weeks ago. It works fine with all the wireless laptops I have in the house, however I can not get an internet connection on this particular desktop PC using a Linksys Wireless-G PCI Network Adapter.

I've tried updating the driver but to no avail.

Any help would be apreciated.

Thanks.
 

A:Solved: New wireless-N router won't work with wireless-G PCI adapter

Shouldn't be a problem unless you have the router set to use 'N' only mode.

What encryption are you using? Have you tried connecting w/o encryption?
 

Read other 3 answers
RELEVANCY SCORE 44.4

I have verizon fios wireless router (m1424wr) hooked up to my desktop. putting another desktop in bedroom with vista and shows to have nvidia nforce but I doubt it is wireless. going to use D-Link adapter. Do I have to hardwire that computer first (ethernet cable) in order to set it up as a wireless using D-Link?
 

A:can I hook up non wireless with adapter without pluggin in cable to non wireless

Read other 8 answers
RELEVANCY SCORE 44.4

hi guys

I am constantly getting disconnected from my online games and xbox live parties and it is starting to frustrate me. Here is what I have:

Netgear Wireless - N Router (WNR2000) and a Wireless-N 300 USB adapter. I'm running vista home premium x64 SP2.

Here is my ipconfig :

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Keiths-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection 5:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : RangeMax Wireless-N USB Adapter WN111v
Physical Address. . . . . . . . . : 00-26-F2-A5-F5-70
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.1.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Sunday, May 09, 2010 10:23:38 PM
Lease Expires . . . . . . . . . . : Monday, May 10, 2010 10:23:38 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Conn... Read more

A:USB wireless adapter + Wireless Router = xbox live LAG

Is the PC you are sharing the internet to the Xbox losing connection

would you post back the make and model of any modems and routers you may have and how everything is connected together , wireless, cable and what is using what connection to what device

On the PC when you have a good connection do the following ipconfig /all and pings - see below
then when it disconnects repeat the test

i want to see if the PC to internet is a good connection and if you are losing connection between the PC and Xbox only

{ipconfig /all}
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here
We would like to see the results from ipconfig /all post back the results here
-> Start
-> (XP - enter the following in the RUN box)
cmd /k ipconfig /all
-> (Vista or Windows 7 - enter the following in the Search box)
cmd /k ipconfig /all

A black box will appear on the screen -
rightclick in the box
select all
enter
control key + C key - to copy

then reply here and
control key + V to paste
------------------------------------------------------------------------
{Ping Tests}
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

Start> Run {search bar in Vista}> CMD to open a DOS window and type:

T... Read more

Read other 2 answers
RELEVANCY SCORE 44.4

Thanks for all your help! Im all fixed up now, got everything transferred over to the new HDD, got the new HDD installed and everything is working wonderful now. I tried checking to see if the failed HDD was under warranty but they couldnt determine that with my serial number, I still have it but will try again for warranty.

I do have a new problem now, if you want to try and help me with this one! I have a Gateway Ationtec Wireless DSL modem, GT704-WG installed, now my son has a school computer we need to hook up to the wireless internet, I bought a Belkin N wireless USB adapter for his computer, downloaded the software and plugged in the USB adapter , the light blinks blue on the Belkin but it shows no wireless connectivity? what am I doing wrong? am I suppose to do something on my Gateway? or do i use the same setup I did when installing the DSL modem on my first computer? Ive been at this all morning and Im ready to toss in the towel! my PC has Windows XP home ED. and sons PC has Windows XP PRO, mines is a Dell 4500 and his is a HP 7540.
any advise?? please
 

A:Question about setting up wireless on a computer with a USB wireless adapter

Have you properly setup the wireless network? Installing the USB adapter is only one part of the wireless networking. Run the wireless setup in the Control Panel. Follow the instructions carefully
 

Read other 10 answers
RELEVANCY SCORE 44.4

Over the last two days, I've noticed that my laptop has been losing it's wi-fi connection. When I open the network connector, none of the local networks, including my own, appear in the list. I've checked that the network adapter is switched on (I've even switched it off for a few seconds and switched it back on), and I've refreshed the list multiple times to no avail. When I restart the computer, my wi-fi connection is restored, but after a few hours it drops again and I have to restart the computer to reconnect. I'd also note that it's most likely not a router or modem problem, as nothing else is losing wi-fi connection (xbox, cell phone, etc.)

Thinking it may have been the result of a virus, I've run a Malwarebytes Scan in Safe Mode. The Scan log is included at the bottom of this post. I thought this may have fixed the problem, but a few hours after restarting the computer, it happened again.

My computer is a TOSHIBA Satellite A305, running Windows Vista Home Premium. If there are any more specific details that you need, please let me know. I greatly appreciate any help I can get with this. As of right now, it's just a minor inconvenience, but I don't want it to end up being something that would shut me down completely.

Thanks!
Matt

Malwarebytes Anti-Malware 1.61.0.1400
www.malwarebytes.org

Database version: v2012.06.17.07

Windows Vista Service Pack 1 x86 NTFS (Safe Mode)
Internet Explorer 8.0.6001.19088
Matt Banfield :: MA... Read more

Read other answers
RELEVANCY SCORE 44.4

My internet has been working fine until a few minutes ago, when my connection just vanished.
I went to try and reconnect but my Belkin N Wireless USB adapter could not find any wireless networks to connect to.
While searching for a connection, the light starts blinking like it is searching, but then it says that it can't find any. Also, when I plug in the adapter, a popup comes up saying that there are wireless networks nearby, but when I click it there are still none.

I've tried reinstalling drivers but still nothing. I'm not sure what else to try because I'm afraid I might mess something up even more.
If you need any more information just ask.
Please help me to fix this problem. Thanks.
 

A:Solved: Wireless adapter cannot find any wireless networks

Read other 15 answers
RELEVANCY SCORE 44.4

Specs:

HP G6000
ADM Athlon 64 x2 Dual-Core Processor TK -53
1700 MHz
2048 MB

I switched my laptop on one morning and the the wirelss light on the front, which is usually blue, stays orange as if it's switched off. My wireless internet now doesn't work and the broadcom driver has gone missing from device manager.

I've done a lot of research and the problem seems to be common, I just can't find a solution. I've have tried the following to no avail;

- Uninstall/reinstall wireless drivers
- Update BIOS/drivers
- System restore
- Memory diagnostic
- Unplug power and battery, then hold power button for 30 secs
The most obvious answer would be to say it's an internal problem and my wireless card is broke, however I find it hard to believe, how it can just stop working one morning. I keep my laptop on a cooling tray, so it can't be fried.

I can't afford to pay for any repairs and my warranty has run out, I'd be really grateful if someone could solve it. I can't cope without internet any longer lol.

If you require anymore details let me know, however I'm on a friends laptop and may be slow in replying, please bare with me.

Thank you.
 

A:Wireless stays orange/wireless adapter missing

----------

{Device Manager}
Post back the results in device manager
Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} > network adaptors, click on the + > post back the devices listed there
are there any ! ? or X

for windows 7
start > control panel>
System and Security>
Device Manager

----------------------------------------------------------------------------
There maybe a problem with the driver or indeed the switch

To test if switch you could download ubuntu www.ubuntu.com - download the ISO
right click on it and burn a bootable CD
now put the CD in the pc and boot off the CD
run ubuntu from the CD only - DO NOT install
see if wireless works

have a read here
http://forums13.itrc.hp.com/service...47627+1259834163429+28353475&threadId=1248210

in device manager, right click on
Altheros AR5007EG Wireless Network Adapter.
Uninstall.
Now reboot the computer, then windows should find new hardware, let it find the driveron the PC, see if that resolves the issue

If not, you mat need to reinstall the latest driver from the HP site

Another solution may be the battery

Make sure the battery is above 25% charge
Now run the battery down, with the wireless switch OFF
Disconnect the battery from the machine
Reconnect the mains power
pressed for 30 seconds on the power button,- reboot the PC leave the battery OFF
and wait for all programs to load - then s... Read more

Read other 2 answers
RELEVANCY SCORE 44.4

Hello friends!

I'm having a bit of trouble tonight trying to connect to my wireless router. Here are the specifics-

Router: Linksys Wireless B
OS: Windows 7
Wireless Adapter: Netgear Wireless G

I used the Netgear installation disc and ran the setup wizard. I was able to connect easily initially, and firefox opened to my google homepage. I tried a simple google search and it went offline. The taskbar icon shows "connections available" and when opened and prompted to connect to the found network, it was "unable to connect". I opened the Netgear set up wizard and it just keeps scanning the channels and never connects. Any suggestions??

Thanks!
 

A:Netgear Wireless G Adapter to Linksys Wireless B Router

Read other 10 answers
RELEVANCY SCORE 44.4

Hey , I am currently experiencing a major problem in my system . It seems that the wifi software has been deleted i.e. the wireless adapter driver and the software has been somehow been uninstalled . This issue began after the recent Windows 8.1 update . These are my laptop specs :- Operating System: Windows 8.1 Single Language 64-bitSystem Model: HP ENVY 15-k004neProcessor: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz (4 CPUs) I've tried to fix the issue by installing all possibly compatible drivers and softwares but none of them seemed to work .I've also reset my pc to factory state using windows recovery as well as Hp recovery and yet the problem was not fixed .I also checked online for solutions but since the laptop products vary , the issue does not seem to be fixed .  Looking forward to helpful advices ...   Thank you.  

A:No wireless connections availble / Wireless adapter driver d...

Hi If a Factory Fresh install has not worked, then there is the possibility it is disabled in the BIOS or the Hardware has failed. If it is software related... Then we look in Device Manager; View; Show hidden Devices  to see if it is actually acknowledged. NEXT...  As an adminstrator, in a Command Prompt Window, typegetmacThis will list MAC addresses for those items that are present, and may not be connected.A good number would be 3,1 x Ethernet1 x Wi-Fi1 x Bluetoothand then typeipconfigand in the long list look for named devices have a matching MAC address.Along with Device manager this is a way to determine the number of devices.  NEXT  type netsh wlan show driversnetsh wlan show interfaces ping loopbackping 192.168.0.1  (your default gateway) Now you should have an idea if the Physical Hardware exists, and if does are there any drivers or addesses etc associated with it.  If you then post any relevant details we can move on to the next step. If in doubt please ask.



Happy 2 [email protected]

Read other 7 answers