Over 1 million tech questions and answers.

Lost 15 GB over the past months for nothing.. realized now

Q: Lost 15 GB over the past months for nothing.. realized now

On my C: Drive that is SSD I used to have around 38GB free (was even 42GB but after accidental turning the windows update on I lost to 38GB). Since I stayed at 38GB without wasting space with silly windows updates (turned off ofc) and I installed only tiny programs, I don't see how did I become from 38GB to 23GB of free space?? I may have searched files through 15K photos a month ago if such thing ever reduces disk space (such as indexing) but I checked one windows.ecb (or something like that) file was only 133MB, I don't see where all the space got lost?? I was installing a few (3-4) small programs that when I saw are of no use to me - uninstalled. I have run disk cleanup many times and I don't see where all that space went?

I may have accidently enabled 'Windows 7 file recovery' but I made sure to disable this trash immediately, meaning I do not have any folders on the disk space that would take so much memory.

I know that sometimes if you delete a lot of files like thousands of files, 20GB + of space, the space doesn't restore immediately (whenever it comes from many deleted files) but for that reason I deleted files from removable disk, to not get any traces on the main HDD.

Is there any tool to check over the months, how your free space got lowered, I could then see on a graph if the drop of space got sudden or not, to identify what could have caused it. And I dislike using any 3rd party 'cleaners' or whatever software

RELEVANCY SCORE 200
Preferred Solution: Lost 15 GB over the past months for nothing.. realized now

I recommend downloading and running DRP. It's a recovery tool that has been proven to recover files that most other programs have no luck with. I've even recovered files from freshly formatted or partitioned drives.

You can download it direct from this link http://goo.gl/v51TwD. (This link will automatically start a download of DRP that you can save to your computer.)

A: Lost 15 GB over the past months for nothing.. realized now

You can set how much space is used for System Restore, check and see how much space is allotted and how much percent wise is being used.

Check it here:

System Protection - Change Maximum Disk Space Usage in Windows 8

Read other 19 answers
RELEVANCY SCORE 59.6

OS: Win 8 pro

System: x64

Originally, there was no windows in my laptop since I bought the DOS version. But the first OS that I installed was win 8 pro and I switched back to win 7 ultimate at some time and finally switched back to win 8 pro. Both are full retail version.

Age of system: 8 months

Age of installed OS : 1 month

CPU: Intel(R) Core(TM) i7-3630QM CPU @2.4GHz (Quadcore but my dxdiag says that I have 8CPUs?)

Video Card: NVIDIA GeForce GT 750M

MotherBoard: I tried with CPU-z but it says invalid in motherboard field. So I googled and found out that I can use cmd to find it. Below is some command that I type through google. Not sure which one is my motherboard model.


Power Supply: Lenovo 19.5v == 6.15A

System Manufacturer : Lenovo

Model Number: YB00192238

I've been getting BSOD since early october. I already tried to use system restore back to previous month before I got BSOD and still getting it.
I've tried to re install windows several times and still get this BSOD.
There was a time I was just freshly installed the windows and in the middle of installing drivers of my laptop and I got BSOD.
I noticed I only get BSOD if I connect to the internet, specifically while browsing or downloading. I never get BSOD while being offline.
So here I am, finally given up on how to solve this and search for help from expert.

Thanks in advance for the input.
Apologize if I happen to miss some details.

A:BSOD for the past months

UPDATE:

I've run the driver verifier and I got a bsod.
I have re attach the new dump and all other things in this post.
I will update on RAM, HDD and initial later.

Read other 4 answers
RELEVANCY SCORE 59.6

Hi, I am getting this BSOD from past 6-8 months, i switched over to win 7 from XP (in XP also i suffered same problem), few days the Win 7 had no problem but after that every time i start my comp i get at least 4-5 times BSOD n the system keeps on going to safe mode.

Kindly help me.




Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 0000008C
BCP2: 00000002
BCP3: 00000000
BCP4: 88DD3FF1
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\102012-15303-01.dmp
C:\Users\Arun\AppData\Local\Temp\WER-32385-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

A:Getting this BSOD from past 6 months.

Please follow the http://www.techsupportforum.com/foru...ta-452654.html to provide us with your crash reports, and we will do our best to give you troubleshooting steps to fix the crashes.

Read other 1 answers
RELEVANCY SCORE 59.6

Well Ive had the BSOD but finally after sorting out the issue & changing the RAM I had no BSOD issues for few days but this has started again & the error I get is "IRQL_NOT_LESS_OR_EQUAL", which according to me is the driver issues..!!!

Can anybody please specify me the solution..???

Some Extra INFO

System 2.5 Years old [New RAM, 15 days old]
OS installed on 1st Jan 2011 [fresh retail install]
No over clocking done
Have had no issues on LINUX

EDIT: - Changed attached flies from txt to dmp

A:BSOD for the past 8 Months

Welcome to Seven Forums.
While your at it please take the time to fill in all your system specs. here
Attachment 129940

It will be needed to fully help you.
Thanks.
Fabe

Read other 9 answers
RELEVANCY SCORE 58.8

I've been getting seemingly random BSODs on my Win8.1 box for months now. There are several different errors that show up, and most of them seem to point to the drivers. I have no idea which driver could be causing the issue though, as I've reinstalled the majority of them.

A few I can remember:
DRIVER_IRQL_NOT_LESS_OR_EQUAL
ATTEMPTED_EXECUTE_OF_NON_EXECUTE_MEMORY
TIMER_OR_DPC_INVALID

Bluescreenview points at ntoskrnl.exe for nearly every one of them, though some have others thrown in as well such as usbehci.sys, dgxkrnl.sys, and ndis.sys

I'm at a loss of what to do at this point. Some days I only get one BSOD, other days I get 5+. It's really starting to be an issue.

A:BSODs over the past few months. Many different reasons

MSINFO32 report is missing. Please do this:





MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).

If you're having difficulties with the format, please open an elevated (Run as administrator) Command Prompt and type (or copy/paste) "msinfo32 /nfo %USERPROFILE%\Desktop\TEST.NFO" (without the quotes) and press Enter. Then navigate to Desktop to retrieve the TEST.NFO file. If you have difficulties with making this work, please post back. Then zip up the .nfo file and upload/attach the .zip file with your next post.



Out of 11 memory dumps there were 5 different BSOD error codes. The differing error codes are usually symptomatic of a lower level problem within the system. They are usually caused by one of these things:
- borked (broken) hardware (several different procedures used to isolate the problem device)
- BIOS issues (check for updates at the motherboard manufacturer's website)
- overclocking/overheating - You'll know if you're overclocking or not. If uncertain we can suggest things to check.
- missing Windows Updates
- compatibility issues (3rd party hardware/drivers), older systems, or even pirated systems
- low-level d... Read more

Read other 9 answers
RELEVANCY SCORE 58.8

Hi there!
 
So as the title suggests, I've been having multiple BSOD's over the past few months that appear to be getting more frequent. I'm not sure if they're related as some of the error codes are different while others are the same. Hopefully you guys can help me here.
 
I'm going to be posting the BlueScreenView info on each as well as providing a link to the minidump file via Mediafire.
 
 
-------------------------BSOD 1--------------------------
Date: 1/13/15
 
Bug Check String: SYSTEM_SERVICE_EXCEPTION
 
Bug Check Code: 0x0000003b
 
Parameter1: 00000000`c0000005
 
Parameter2: fffff800`02e79c60
 
Parameter3: fffff880`0b36bf90
 
Parameter4: 00000000`00000000
 
Caused by Driver: dxgmms1.sys
 
Caused by address: dxgmms1.sys+c0a1
 
Crash Address: ntoskrnl.exe+75bc0
 
Minidump link: https://www.mediafire.com/?ba7i017yp33fn40
 
-------------------------BSOD 2--------------------------
Date: 5/8/15
Bug Check String: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug Check Code: 0x000000d1
Parameter1: 0000001d`684b4562
Parameter2: 00000000`00000007
Parameter3: 00000000`00000001
Parameter4: fffff880`04bc39f7
Caused by Driver: nvlddmkm.sys
Caused by address: nvlddmkm.sys+fe9f7
Crash Address: ntoskrnl.exe+76e80
 
Minidump link: https://www.mediafire.com/?ts1m9m3668dl31f
 
 
-------------------------BSOD 3--------------------------
Date: 7/4/15
Bug Check String: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug Check ... Read more

Read other answers
RELEVANCY SCORE 58.8

i've been getting these BSOD
Please help

A:BSOD for the past few months 0x0000001e

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

Read other 3 answers
RELEVANCY SCORE 58.8

I'm on 8.1 and it's almost always when playing World of Warcraft or sometimes just using Firefox. The most recent BSOD a minute ago was KERNEL_SECURITY_CHECK_FAILURE.

Blegh.

A:Daily-ish BSOD past few months :(

One of your dumpfiles blames Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_SEGMENT::MarkResourcesForEviction+cf ).
Driver Description: DirectX Graphics MMS./ this is probably related to your videocards and you mentioned that the bsods mostly happens when gaming.

In your msinfo32 report i found:





<Device><![CDATA[Intel(R) HD Graphics 4600]]></Device>
<PNP_Device_ID><![CDATA[PCI\VEN_8086&DEV_0412&SUBSYS_D0001458&REV_06\3&11583659&0&10]]></PNP_Device_ID>
<Error_Code><![CDATA[This device is disabled.]]></Error_Code>



.

Why is this device disabled did you have problems with it?
How did you disabled it, through device manager or did you disabled it in your Biossettings?.
Your Logitech G710 keyboard drivers are outdated(2009), please update the latest drivers from here Support + Downloads: G710 Mechanical Gaming Keyboard - Logitech and also update the drivers(2012) for your Logitech HD Pro Webcam C910.

Please also update your Intel Watchdog Timer driver(2010), it is (probably) part of the intel mangement engine.
Check the support/driver downloadsite of your OEM model or system(mainboard) for the latest windows 8.1 driver here GIGABYTE - Motherboard - Socket 1150 - GA-Z87X-D3H (rev. 1.x).
And please also update all the other drivers to the latest version.

If theBSOD's continue, I'd suggest running Driver Verifier according to theseinstructions: Driver Verifier Se... Read more

Read other 8 answers
RELEVANCY SCORE 58.8

Thats right, ive gotten BSoD 41 times in the past 5 months (Since I got my computer) Im pretty mad as it seems to happen while playing Minecraft or while web-browsing (witch are the 2 things I do most ) but it has happened right on start-up. It would be so great if someone here could help me out, and finally get this problem resolved. Thanks in advance . ~Happiness1
Questions:
? OS - Vista/ Windows 7 ? Windows 7
? x86 (32-bit) or x64 ? x64
? What was original installed OS on system? Windows 7
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Full Retail Version
? Age of system (hardware) Around 5 months.
? Age of OS installation - have you re-installed the OS? 5 months (never re-installed)
? CPU: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz
? Video Card: NVIDIA GeForce 9500 GT
? MotherBoard: Board: Intel Corporation DG41WV AAE90316-102
Serial Number: BTWV104006QE
Bus Clock: 266 megahertz
BIOS: Intel Corp. WVG4110H.86A.0015.2010.1111.1718 11/11/2010
? Power Supply - brand & wattage: I dont know :/ (Cant remove it)
? System Manufacturer: Custom built
? Exact model number (if laptop, check label on bottom): Custom built

A:BSoD... 41 times in the past 5 months.

Hi -

Probable issues with RAM are a likely cause.

Run memtest86+ - http://www.techsupportforum.com/2863029-post5.html

Before you run memtest86+. . . .

- remove Daemon Tools/ Alcohol 120

- Run the Driver Verifier -- http://www.sysnative.com/0x1/Driver_Verifier.htm

I see several old drivers in the dumps. If BSODs are software related, D/V can help find the culprit.

Regards. . .

jcgriff2


`



BSOD SUMMARY

Code:

Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\091211-22245-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Mon Sep 12 15:16:32.395 2011 (GMT-4)
System Uptime: 0 days 1:18:32.112
Probably caused by : win32k.sys ( win32k!SURFACE::bDeleteSurface+3c8 )
BUGCHECK_STR: 0x1a_403
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: iexplore.exe
FAILURE_BUCKET_ID: X64_0x1a_403_win32k!SURFACE::bDeleteSurface+3c8
Bugcheck code 0000001A
Arguments 00000000`00000403 fffff680`00027b78 ba500000`a2c62867 fffff680`00007b78
BiosVersion = WVG4110H.86A.0015.2010.1111.1718
BiosReleaseDate = 11/11/2010
SystemManufacturer =
SystemProductName =
MaxSpeed: 2930
CurrentSpeed: 2926
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\PalmDesert\_jcgriff2_\dbug\__Kernel__\091211-15428-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
... Read more

Read other 7 answers
RELEVANCY SCORE 58.8

I looked through some archives for my needs and I am not really seeing anything specific to my issue.
If you have a link to previously posted I will use it if not, I kindly am asking for help.
Trying to do a system restore on my machine and it wont let me go back any farther than 12-2010
Is there a way to go back father into the year?
I need to restore at least 6 months behind today's date.

 

A:Can't go restore back past 2 months?!

Read other 6 answers
RELEVANCY SCORE 58.8

Ever since I built this PC I've had BSODs every so often. I've not been able to trace them to any particular source, but lately they seem to be getting a lot more frequent and I am getting fed up, so I figured I would try asking here.

I've used the SF Diagnostic Tool to gather the requested information and attach it to this thread.

The most recent one seems to suggest a problem with the CPU. It's been suggested to me that my CPU might need a microcode update - I installed SiSoft Sandra Lite which is able to check the CPU microcode level and indeed it does suggest it isn't on the latest version, but as far as I can tell there is no procedure for manually updating microcode, you just have to wait and hope it comes down through Windows Update or something.

Can anyone help?

A:Intermittent BSODs over the past few months

Welcome to SF Dan .

The dump files are not showing a definitive cause but most of them are 0x1A, so the best course
of action in these type of situations is detailed in the quote below.








  
Quote: Originally Posted by Arc


Your crash dumps are not showing any finite probable cause.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.








  
Quote: Originally Posted by Arc


First run it with all the existing/installed RAM modules. If it comes with no error, all is good.

But if it starts showing errors, Stop testing. Errors/red lines means one or more RAM is faulty. But the fault may occur due to a faulty DIMM slot, too, which is a motherboard component. Using memtest86+, you can discriminate between a faulty RAM and a faulty motherboard.

How? Say you have two RAM sticks and two DIMM slots. You obtained errors at the test with all RAM sticks installed. Now, remove all the sticks but one. Test it in all the available slots, one by one. Continue the same procedure for all the available sticks.
How to make the inference that is it a RAM issue or it is a motherboard issue? Suppose you have got the result like that:
testSlot1Slot2RAM1ErrorErrorRAM2GoodGood It is a RAM, a bad RAM.

But if you have got a result like that:
testSlot1Slot2RAM1ErrorGoodRAM2ErrorGood ... Read more

Read other 1 answers
RELEVANCY SCORE 58.8

Hi everyone! I've received 3 bsod the past 2 months, i don't really know where they are coming from but maybe its cause i rarely turn my Laptop off all the way. i usually put it in sleep mode. Anyways here the little windows that popped up once i turned it back on. the most recent one came when i turned my laptop on from sleep mode, maybe around 10 minutes in it just happend.Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033Additional information about the problem: BCCode: 9f BCP1: 0000000000000003 BCP2: FFFFFA80115B94E0 BCP3: FFFFF80000BA2748 BCP4: FFFFFA80111327C0 OS Version: 6_1_7601 Service Pack: 1_0 Product: 768_1Files that help describe the problem: C:\Windows\Minidump\021412-32916-01.dmp C:\Users\Eddie\AppData\Local\Temp\WER-73788-0.sysdata.xmlRead our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txtI tried going to the "files that help describe the problem" while the window was up but it wouldn't let me open them. Once i clicked check for solutions, the .xml file disappeared. The dmp is still there but it won't let me open it, it says access denied. I am the admin on this computer.Thanks for the help! off to school now.

A:BSOD out of no where 3rd time past 2 months.

Don't bother checking for solutions. Can't remember a time that has actually worked for me. I am also going to ignore the codes for the moment as they do not enjoy telling the exact issue at hand.

1. What are you doing when the BSOD pops up? You say you keep it in sleep mode, etc?

2. It is a very rare issue. Give us your computer specs (I recommend Speccy for a more thorough deluge of information).

3. Toss us a small list of your most used programs (that you actually have to open yourself) and any consistent programs such as Anti-Spyware and Anti-Virus.

4. There is a chance you do have a minor (or very sneaky) virus on your computer causing the issue. Run a thorough virus scan via Avast or maybe Avira (free-versions) and nab yourself Comodo (free again) while you are at it.

5. Finally (and last on the list) how often do you actually turn off your computer? What are your core temperatures? When was the last time you applied Thermal? Can you cook an egg on the darn thing? Let us know.

Read other 11 answers
RELEVANCY SCORE 58.8

I'm throwing in the towel.
I have received numerous BSOD's over the past 8 months or so. They reference different errors, but most are memory related. The last one (today) was saying that I was attempting to execute non-executable memory.

I have not had a lot of time to sit and fix the issue. I finally decided to come here and get help.

I am attaching the required zip files.
By the way, this happens on all 4 accounts on the computer, not just admin, etc.
The dump files are processed from my personal account, which is also the admin account.
Do I need to attach the zip files from every profile on the host?
Please help asap!

- x86 (32-bit) on 64 bit hardware
- it is the original OS
- OEM : Home Vista Premium
- What is the age of system (hardware)? roughly 4.5 years old
- What is the age of OS installation? roughtly 4.5 years old
- video card: ATI radeon HD 3600+ 1GB
- RAM: 4GB
- CPU: athlon dual core 2.5 Ghz

A:Tons of BSOD over the past several months

Adding my minidumps.

Read other 27 answers
RELEVANCY SCORE 58.8

Hi people,
I have facing this crashes for a past 3 months , i had windows 7 home premium 32 bit version which had the same problem now for time being i switched over to windows xp for trouble shooting but still the problem persists with random crashes

My specs are
AMD athlon II x2 @2.8Ghz
2*1GB transcend ddr2 ram
currently running windows xp sp2 professional 32 bit

posting my dump file along with this post , hoping for some valuable help . Really fed up because of this PC problem in the midst of my studies

Thanks in advance

A:Frequent crashes for the past 3 months

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\Kingston\BSODDmpFiles\jai007\Windows_NT6_BSOD_jcgriff2\Mini030812-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows XP Kernel Version 2600 (Service Pack 2) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp_sp2_rtm.040803-2158
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055c700
Debug session time: Thu Mar 8 04:05:52.203 2012 (UTC - 7:00)
System Uptime: 0 days 0:20:13.778
Loading Kernel Symbols
...............................................................
.........................................................
Loading User Symbols
Loading unloaded module list
...........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 10000050, {acc81a28, 0, b9dfc35c, 0}
Could not read faulting driver name
*** WARNING:... Read more

Read other 1 answers
RELEVANCY SCORE 58.8

Well the problem is that it is slow and i think they have some unwanted virus on there which wont leave even tho i do system recovery and many other virus protection program has told me there was no errors.I cant reboot bc my dvd drive wont work it stills open but the light.The only time my computer work finely is after a update or recovery.Please help me with this problem?My computer is a acer extensa 5620 and has windows vista.

A:Hello everybody for the past two months i been having problem with my laptop

Quote:




my dvd drive wont work it stills open but the light




I'm not sure what you mean by this?
What is the make and model of your computer? You may have a Recovery Partition on your computer. If you start up your computer, you may have a quick message over the logo that says Press (key) to Enter Recovery, sometimes this is F11. If so, this will set your computer back to Factory Defaults. This will remove all personal data, so backup first.
If you do not have a recovery partition, then read up on the link in my signature PC Running Slow? And try those things.

Read other 1 answers
RELEVANCY SCORE 58.8

I have so many Blue Screen errors on my PC I don't know what to do with myself.

I have re-installed Windows 7 Ultimate fresh.

I have been running Driver Verifier for the past 6 hours. No BSOD so far so I am thinking it isn't a driver issue.

I have ran the Seagate HD Diagnostic Test, and everything has passed.

A lot of the time these BSOD's occur when I am gaming/streaming my games.

Specs: Windows 7 Ultimate
Video Card: Nvidia 570 GTX
Processor: AMD 1090 Thuban
Hard Drive: Seagate 500 GB
Ram: 8 GB G.Skill Ripjaw

==================================================
Dump File : 021012-14523-01.dmp
Crash Time : 2/10/2012 3:07:24 AM
Bug Check String : SYSTEM_SERVICE_EXCEPTION
Bug Check Code : 0x0000003b
Parameter 1 : 00000000`c0000005
Parameter 2 : fffff880`010e83d1
Parameter 3 : fffff880`082e5fb0
Parameter 4 : 00000000`00000000
Caused By Driver : fltmgr.sys
Caused By Address : fltmgr.sys+43d1
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7cc40
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\021012-14523-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 292,144
==================================================

==================================================
Dump File : 021012-14289-01.dmp
Crash Time : 2/10/2012 2:39:23 AM
Bug Check String : UNEXPECTED_KERNEL_MODE_TRAP
Bug Check Code : 0x0000007f
Parameter 1 : 00000000`... Read more

A:Several BSOD errors for the past few months

Please follow the http://www.sevenforums.com/crashes-d...tructions.html to provide us with more detailed information about your system, crashes, and error logs.

Read other 9 answers
RELEVANCY SCORE 58

Hi there!

So I've been getting multiple BSODs over the past few months during general use. I've gotten several different stop error codes that I will list below, as well as uploading the zip file as per the posting instructions.

System service exception
Driver Irql not less or equal
Kmode exception not handled
System thread exception not handled
Page fault in nonpaged area,

Any and all help is very appreciated! I've tried updating drivers and running memtest, but the problems still persist.
Thanks in advance!

A:Multiple BSODs over past few months during general use.

Hi Salrion,

Welcome to the 8forums.

It appears I cannot read the latest dump file, this could be caused by hardware damage. I think the hard drive might be causing this.
The 2nd most recent dump file says there might be memory corruption.



Diagnostic Test

RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums


   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.



Diagnostics Test

HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums


   Note
Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk Disk Check - Windows 7 Help Forums

Read other 5 answers
RELEVANCY SCORE 58

Hello all. Since around the middle of October, I have suddenly been receiving BSODs, mostly DPC_WATCHDOG_VIOLATION, MEMORY_MANAGEMENT, or IRQ_NOT_LESS_OR_EQUAL. I have collected the necessary files and will upload them, with one caveat - I cleaned out the dump files a week or so ago, so I only have a few. After trolling forums for a bit, I did a few self diagnostics such as updating drivers, and that seems to have reduced the frequency. I was getting them at least once a day, but after updating the Razer Synapse program by cleanly uninstalling and reinstalling, I was able to knock a lot of it out.

I updated to Windows 10 basically the day it was released, and have not really had any problems up until this point. I generally use this computer for gaming, but it does also serve as a home office PC as well. I am very careful as to what files I will allow on my PC, and I have run multiple virus scans/Windows Defender scans. The only thing that I have seen it pick up is a false positive on Oblivion.exe (game) due to modding the EXE to be LAA. Other than that it is clean.

I also ran SeaTools, and that came back clear. I have not run chkdsk yet, but will probably run that if necessary. The only new hardware that I can recall adding in the past few months would be the Microsoft Xbox One Wireless Adapter, back near the end of October/beginning of November.

Please let m know ou need any additional information.
NICK-PC-Sat_12_12_2015__91635_67.zip

A:Receiving frequent BSODs in the past few months

There are traces of bypasses on your system.
You are required to remove bypasses and related software before support may be given.
Forum rules





4) No piracy or discussion of piracy allowed at all. Such as software, music, videos and other intellectual property violations (e.g. downloading youtube videos locally etc).

Read other 0 answers
RELEVANCY SCORE 58

Hi, I am facing wifi connectivity problem from past 6 months for the same I have coordinated with call center at least 50 or more times & 4 times  engineers has visited my place & 2 times , I went to service centre , but till now my problem has'nt resolved they aren't able to identify that what the exact problem is , I am wasting my atleast one hour of time daily to get this issue resolved by my self but its not working . when ever i am contacting call center they are  navigating me to engineers , & engineers are telling there is software issues please update . I have updated every single update in my system & the same thing i am doing from last 6 months but the issue is not getting resolved. I have visited the service center of Hyderabad , I dont understand what kind of engineers HP has recruited they aren't ready to listen what customer is saying. Any way , I am fade up with this follow up with call center & their false promises & of no use of so called service centers .  I WANT RESOLUTION AT THE EARLIEST.  Kindly provide me escalation matrix of HP . I have to mail it to HP CEO. HP was known for service in my opinion , but they have proveed me fool.

Read other answers
RELEVANCY SCORE 58

Hey everybody,
I've been getting system crashes and restarts for the past two months. It seems to be completely random and I never use any programs that are too intensive - at most photoshop. In the first day it happened, it restarted 5 times within half an hour. This was helped by me doing a system restore. Still had the problem but it was around once a day. After talking to HP support a few days ago and doing that the guy told me to do, it got waaay worse and I restored it again. It's still worse than before but slightly better.
Anyway, I have no idea what I should do. Please help!

HP p6330f refurb
Windows 7 x64 OEM,
Intel Core i3 530, 2.93 Ghz
1TB SATA HD, 6GB RAM
age - about 3 months.

Attached is the BSOD .rar and the blue screen error

A:random BSOD, restarts for the past 2 months

I suspect ZoneAlarm is the cause here. Please remove it with with this tool: http://download.zonealarm.com/bin/fr...cpes_clean.exe

Reset the Windows Firewall. Open an elevated command prompt and enter netsh advfirewall reset.
Code:
Event[13900]:
Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 2010-09-20T07:23:58.000
Event ID: 1001
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Project-Orion
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000006f8, 0xfffff80002a95b9f). A dump was saved in: C:\Windows\Minidump\092010-18049-01.dmp. Report Id: 092010-18049-01.
I believe CCleaner is deleting your memory dumps. Please disable it for now, until you determine the BSODs have stopped.

Read other 9 answers
RELEVANCY SCORE 58

I have W7, 6 memory 650 HD, quad core -2 year old hd computer. ISP CABLE 12 m speed - On net speed tests , i get 10 to 20 download speeds. I am using 335 g with, with 249g showing as still available for a total 584. .

COMPUTER is running very very slow on net and non- net, with occasional hang ups that last sometimes last as much as a minute. The Hang ups are more frequent on non- net and I sometimes get the no responding.

We checked everything that could be using extra resources and it made very little differences .

We discovered one potential problem and I seek your advice on this matter-- In the info drive properties , The box that says says " COMPRESS THIS DRIVE TO SAVE DISC SPACE " was CHECKED.

A friend said that if the g's are uncompressed , my 335g could possibly be double and the drive is overloaded causing the computer to run slow everywhere- He suggests that I just go buy a new 2 tb hd and move all my stuff over and keep the existing hd as a partial back up.
I am extremely hesitant to remove the check box for fear of what could happen.

I do happen to have everything backed up via external hd including the Operating system , but putting that in motion is something that I would like to avoid.

Anyway, I sure would appreciate your advice on this mess.

Sincerely,,,, Ralph

A:Computer running very slow over past few months

Check my signature on the link on how to safely "Optimize" windows 7. Also, this tutorial may help with any problems:
SFC /SCANNOW Command - System File Checker (by Brink)

In addition, as the optimization tutorial suggested, the more programs you have installed, the higher the chance you will have for slowdowns. Only have a single antivirus installed at any one time, and please oh please say that it isn't Avast!, McAfee, or AVG -.-

For the networking problem, go to the wireless adapter card's manufacturer's website and look for any updates to the driver software. If there are, download it, uninstall the driver on your computer, and then install the new driver.

Check your add ons and make sure they are not swamping your computer with slowdowns. Disable any you do not want or use.

Read other 9 answers
RELEVANCY SCORE 58

Since about 7 months back I've been experiencing a BSOD on my Toshiba Satellite C655D-S5529 laptop. It would happen upon logging into my account and would only stop if I booted up in safe mode. Other people use the computer too so I can't be quite sure what may have caused it but since this week it has actually booted up twice, including now, without being in safe mode and hasn't blue screened. The BOSD always returns though so I'm sure this time will be no different. I was wondering if anyone could help me resolve this issue as I would love to be able to use this laptop again. Any help is greatly appreciated.

A:BSOD for the past several months, Error 0x0000001E

Please follow fully - Blue Screen of Death (BSOD) Posting Instructions

Use the "Grab All" option.

Update your System Specifications with Speccy, and then copy this information into your System Specifications: Go to your UserCP, and then select Edit System Spec in the left pane. Copy the information from Speccy into the required fields. These System Specifications will then follow your every post.

Read other 9 answers
RELEVANCY SCORE 58

Like the topic title says my Windows 7 computer has been getting Blue Screens on and off for a while now.  This is a fairly recent computer that I built at the start of last year.  I don't know how much help this information would be but at the start of this year I installed a new 2TB hard drive, and made a switch from WIFI to Ethernet, and sometime after that the BSODs started happening.  I bring up the Ethernet bit because one of the BSODs happened after I accidentally knocked out the Ethernet cable.
 
I decided to stop putting it off after i got two Blue Screens within the same hour today.
 
I've attached the minidump files down below.
 
Any help would be greatly appreciated.

A:Computer experiencing BSOD on and off for the past several months

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

Read other 3 answers
RELEVANCY SCORE 57.6

Dell XPS PC was extremely stable until may of this year which is when I started getting BSODs. About 1 year prior to this I started experiencing very slow performance; startup and logon would average between 6 to 7 minutes. So, in May of this year, I added more memory, increased from 8GB to 16GB, and I added an additional internal hard drive and moved most of my media files to it, so the original hard drive contains only windows, software and my document files. I also, removed Norton Internet Security and replaced with Windows Security Essential. When I started experiencing BSODs I ran mem86tst, but it did not turn up any problems. Also, I ran Tweakbit PCcleaner which cleaned up my registry. I also ran Tweakbit Driver updater which recommend a bunch of driver updates, but I was reluctant to make that many changes so I updated only my graphics card.

Read other answers
RELEVANCY SCORE 56.8

Hi there this is my first post on these forums so apologies if I'm not too familiar with the layout. I'm not too computer savy so if anyone could try simplify any answers/solutions that would be great. Basically the problem is for the past few months around start up of windows 7 I was getting freezes, BSOD errors (in particular IRQL_NOT_LESS_OR_NOT_EQUAL and Page_fault_in_non_paged_area being the main ones) and my pc would be in a continuous loop of booting then freezing or shutting down and I couldn't get the pc to work. I thought the problem could be corrupted windows files so I reinstalled windows onto my computer using the isntallation disk and installed drivers and all was working fine for around 4 days. Each day my windows would have importaint updates so I installed them when prompted. One day I all of a sudden started getting the same errors I got before, PAGE_FAULT_IN_NON_PAGEED_AREA and IRQL_NOT_LESS_OR_NOT_EQUAL and no new software had been installed at this point. I have tested ram and my hard drive with no errors showing although when looking at properties of my computer I have 20GB of ram (16GB Available) not sure if this has anything to do with it (2 x 8 GB sticks 1 X 4 GB stick). Hopefully you guys can help me out and prevent me shelling out on a new rig. Thank you, Conor .
 

Read other answers
RELEVANCY SCORE 56.8

hi,
i am new here
i have been getting bluescreen error from past months and i have donr almost everything to resolve it but it still persists...
i have given it for reformatting and the dell service put it under testing for 1 day but couldnt find the bluescreen..
i have also reinstalled windows in another partition but it occurs in that too..
it appears every morning after using my comp the night before.

A:blue screen error multiple times from past 2 months

Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation. Yours is from 2010. I would re-install the newest.

Read other 1 answers
RELEVANCY SCORE 56.8

· OS - Windows 7 SP1 64-bit (Original OS) - User installed/Custom Built Desktop (Not OEM)
· 2.5 Years Old System, built Aug 2013 (All original components)
· Installed Windows 7 on Aug 2013 and reinstalled/reformated with same Windows 7 on April 4th, 2016.
 
· Intel i5-4570
· EVGA GTX 650 Ti 1GB
· MSI H87-G43
· SilverStone ST50F-ES 500W
· Primary/OS Drive: Samsung 840 120GB SSD, Secondary: WD Blue 500GB 7200RPM, Tertiary: Samsung 850 EVO 120GB SSD
· G.Skill RipJaw 16GB (2 pairs of 2x4GB) (Bought original pair in 2013 and second pair late 2015)
 
Before the reformat/reinstall, I accrued similar BSOD error codes as attached. I'll note that the frequency of BSODs has gone down considerably since I reformatted/reinstalled (Instead of once maybe 5-12 hours of activity, now its closer to once per 24-30 hours).
 
I've run various versions of MemTest86 (As well as Window's Memory Diagnostic Tool) while swapping the sticks around, checking each pairs, different slots and different combinations, all of which have resulted in no errors. I'll be running MemTest again as soon as Driver Verifier is complete. I have run SSDLife on both SSDs with no errors in both SMART and file system integrity (I can include logs if need be), I'll be running health checks on my HDD but recent checks on both SMART and file system integrity (As of Dec 2015) came back clean.
I've checked my power supply under heavy load/gaming and while idle with both... Read more

Read other answers
RELEVANCY SCORE 56.4

Hardware

ISP: Cogeco

Loc: Southern Ontario, Canada

Modem: ARRIS TM822

Router: ASUS RT-N12C1

Service Calls & Conducted Services

Service Calls: 20+

Technicians: 14

Maintenance: 5

Modems Replaced: 4

ISP recommended routers: 3

In-House Rewiring: 2

Bell Blocks Removed: 2

Drop Replaced: 3

Tap Relocation: 2
Fast Q&A

- Modem DC's with or without: a) direct computer connection, b) direct receptacle or power bar, c) phone line connected, d) router connected, or any configuration of settings, e) battery connected, f) waiting 10/20/30/60 seconds before resetting, g) doing any combination of the above

- Technicians stated our signal in the house was perfect

- Technicians stated early on that the signal from the pole has a high upstream

- Technicians who have come out during a downtime have stated 'signals are all over the place, no consistent measure'

- Technicians have stated that they are surprised the connection is up because 'your signals are in flux 10-50 dB on every stream and signal'

- Adjacent neighbours have no internet/phone/TV issues. They are also on the same plan and bundle

- Internet & Phone will disconnect every 5-15 minutes, and be down from 1 minute up to 72 hours

- We will go a week without any issues. Then for 2-5 days up to 3 weeks we will have massive disconnections, and complete service interruptions at the above times

- TV has no degradation of signal or any other issues during a down time

- Weather se... Read more

A:Intermittent Internet Issues with Cogeco, up to 72 hour Disconnects - Past 16 Months

This is cable service, right?

First--slightly off topic--the only phone in a household should not be via cable company unless the phone is only a luxury. I know that my cable company even advised my neighbor to not switch to them from a landline unless he had a cell phone.

Sounds like a problem somewhere between the place where her service branches off from the main coax cable and the modem. Maybe a loose connection; maybe a defective component; maybe a frayed cable that sometimes contacts something it shouldn't.

- Technicians who have come out during a downtime have stated 'signals are all over the place, no consistent measure'

- Technicians have stated that they are surprised the connection is up because 'your signals are in flux 10-50 dB on every stream and signal'Click to expand...

And those technicians didn't start working backward to find the source of the fault???

If the service is similar to mine outside the residence her cable connects to the company's cable and that junction should be grounded. Carefully check that connection for tightness and for absence of corrosion or rust. Clean it if necessary and protect it if that seems to be needed. Unless that connection is the source of the problem I think that it is up to the technicians to trace the problem back to the source.
 

Read other 2 answers
RELEVANCY SCORE 56.4

Hello all,

Over the past 6 months or so I have been getting random BSODs with no obvious symptoms of what is causing them.

They started happening last September after I got back from the Summer. To begin with I tried to diagnose the problem following various guides to try and work out what could be causing them. I did the following:
Memtest
Reg check
Driver Verifier
Updated Drivers
Checked for any physical damage on hardware
Tried restoring

No matter what I did I could not either fix the problem or find the cause of the problem. The main reason for this was the "ntoskrnl.exe+XXXXX" would appear each time on each crash, and searching online I could not find a definitive reason or answer to the crashes.

So I decided in the meantime to live with the possible chance that I would BSOD every now and then. For the most part this was fine as they became less frequent.

Then came today. I've had 3 BSOD in one day and now its starting to irritate me. Knowing that my previous efforts to try and find a solution were to no results, I just don't know what to do. I'm getting the point that I might just rip out all my hardware and start fresh, but that won't be for another 3 months or so.

So here are the .dmps from September till now. Looking at them in BlueScreenView the Caused Driver and Address are all different, there are some common patterns such as the "Qualcomm Atheros Driver" I did update this but ended up making the problem worse, as it made m... Read more

A:Random BSOD over past 6 months. Error 0x000000d1 ntoskrnl.exe+74ec0

Update Atheros LAN driver from http://www.gigabyte.in/products/prod...px?pid=4144#dl

Code:
BugCheck D1, {28, 2, 0, fffff880018fc360}

*** WARNING: Unable to verify timestamp for L1C62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for L1C62x64.sys
Probably caused by : L1C62x64.sys ( L1C62x64+6a5f )

Followup: MachineOwner
---------

Code:
Image name: L1C62x64.sys
Timestamp: Wed Apr 25 10:37:17 2012 (4F978685)
One more thing is there .... Agnitum Firewall. I dont know what is it, but as it is contributing to the BOSDs, it should be uninstalled. Probably it is branded as Outpost.

Code:
fffff880`03319e68 fffff880`04d84738Unable to load image \SystemRoot\system32\DRIVERS\afwcore.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for afwcore.sys
*** ERROR: Module load completed but symbols could not be loaded for afwcore.sys
afwcore+0x59738

Code:
fffff880`03319d48 fffff880`04d1d000Unable to load image \SystemRoot\system32\DRIVERS\afw.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for afw.sys
*** ERROR: Module load completed but symbols could not be loaded for afw.sys
afw
Let us know the situation after doing these two.

Read other 3 answers
RELEVANCY SCORE 53.2

I had to shut down my ISP, laptops cannot use and even Iphone was told by apple to turn off and contact authorities.  Nobody seems to want to help.  I have been cut off.  I have a new cell phone but it is already giving me problems and am using my hot spot right now.  Please please tell me what is going on.
 
DDS (Ver_2012-11-20.01) - NTFS_AMD64
Internet Explorer: 10.0.9200.16537
Run by CASEY J at 2:35:50 on 2015-03-29
Microsoft Windows 8  6.2.9200.0.1252.1.1033.18.3986.2291 [GMT -4:00]
.
AV: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\system32\dwm.exe
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Program Files\IDT\WDM\STacSV64.exe
C:\Windows\system32\Hpservice.exe
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Windows\system32\svchost.exe -k apphost
C:\Windows\system32\taskeng.exe
C:\Program Files (x86)\Hewlett-Packard\HP Quick Launch\HPWMISVC.exe
C:\$SysReset\Framework\Stack\SystemResetOSUpdates.exe
C:\Program Files\Intel\i... Read more

A:Please help!!! I have been trying to fix for over 2 months. Have lost everything

# AdwCleaner v4.113 - Logfile created 29/03/2015 at 03:43:36
# Updated 22/03/2015 by Xplode
# Database : 2015-03-28.1 [Server]
# Operating system : Windows 8  (x64)
# Username : CASEY J - KCHP
# Running from : C:\Users\CASEY J\Desktop\AdwCleaner.exe
# Option : Cleaning
***** [ Services ] *****

***** [ Files / Folders ] *****

***** [ Scheduled tasks ] *****

***** [ Shortcuts ] *****

***** [ Registry ] *****

***** [ Web browsers ] *****
-\\ Internet Explorer v10.0.9200.16537

*************************
AdwCleaner[R0].txt - [679 bytes] - [29/03/2015 03:28:15]
AdwCleaner[S0].txt - [607 bytes] - [29/03/2015 03:43:36]
########## EOF - C:\AdwCleaner\AdwCleaner[S0].txt - [665  bytes] ##########

Read other 4 answers
RELEVANCY SCORE 51.6

Hey all,

My girlfriend recently upgrades to Windows 10 like 2 months ago. This week and this morning when she opened up her laptop some maps and files were Missing and unfindable. She Does leave her laptop in Sleep stance at night even though i Tell her not to. This Time the laptop did shut Down due to Low batteries. Is there any way to Recover those files? The files Missing weer not Just recent also some that were months old.

Any Help would Be greatly appreciated!

Nukes

Read other answers
RELEVANCY SCORE 51.6

Today I got attacked by the 2012 XP virus. I managed to get rid of it , or so I thought. I ran several scans, very slow. I now have serious problem with email. I can receive messages but can not send any. I get this error message:An unknown error has occurred. Account: 'pop.embarqmail.com', Server: 'smtp.embarqmail.com', Protocol: SMTP, Server Response: '550 5.7.1 [C19] SBL-XBL Restriction: See http://www.spamhaus.org/query/bl?ip=67.235.47.67' Port: 25, Secure(SSL): No, Server Error: 550, Error Number: 0x800CCC69. Also, I keep being alerted to compact email messages to free up disc space and when I do, I lose 10 months of messages! HELP!!! Thanks to anyone who can help me,
Ellen

A:compacted emails and lost 10 months of messages

Hello and welcome to the forum!

You must be using Outlook Express for your email then

For your inability to send, check with your ISP to see if they need the "My server requires authentication" box checked in OE andd what the port settings are.

OE requiests that you compact messages after every 100 uses.

http://www.kellys-korner-xp.com/xp_tweaks.htm line 367 has a script that resets the counter to zero.
I have used it many times

Read other 1 answers
RELEVANCY SCORE 50

THANKS AGAIN FRANK & ROB FOR YOUR REPLIES TO MY OTHER POST

I'm going back to that after I hopefully am able to do this & if I can do it, get used to it pretty quick. When I 1st started to post recently, I was talking about a problem I was having with my Browser I.E. 8 & that I couldn't update it to I.E. 9 because my OS which is Windows XP Pro is too old.

Now I'm starting to run into some other problems because of it. At YouTube it warned me that very soon I'm not gonna be able to use it anymore because my browser is too old. At another site it was taking a long time & I got a message that my computer was trying to use the compatibility view function to see a new site with an old browser.

I've seen other warnings & there are already a few things that my computer just can't do anymore. I've always used Internet Explorer. When the guy who did most of the work setting this computer up for me (a guy that worked for my brother in law & was in a hurry), I saw he set up a browser I had heard of but never seen, Mozilla Firefox.

I told him that I was only a novice & had only ever used I.E., & he said he assumed I would want Firefox. But he quickly set up I.E. for me too which is all I've ever used on the 2 computers I've had. So Firefox is on my computer, but I think it sorta got messed up or changed over the years on my computer......but I'm not sure of that.

I noticed that when I ran the Adware pro... Read more

A:I've realized this is my #1 priority right now!

Read other 7 answers
RELEVANCY SCORE 49.6

No other browser (IE, Opera) would work.

How? Why?

A:I just realized that I can connect only with Firefox

I've seen this behavior before when I virus/malware app altered the proxy settings of IE.

What happens when you try to run IE and open a web page?

Read other 2 answers
RELEVANCY SCORE 49.6

How's everyone? Very well.

I'm here to simply try to get a lil feedback, suggestions, advice or point me me in the right direction (if there's any) on the most inexpensive way I can finally get this game developed after 3 long yrs. when it came to me in a dream. (I know....it might sound odd) No really, I'm serious as a heart attack. Unfortunately I'm not employed @ the moment, (dislocated Super) also an army vet (non combat) presently halfway thru a 15 week A+ cert.
That won't do me a bit of good w/ my game agenda. I understand, bottom line is you gott'a have $ to invest & make presentations.

I have a friend @ school that offered me "photoshop", what other utilities, programs, etc would I need to make a brave & intelligent go @ it on my own ?

Any info would be appreciated & kept in my vault.
Thanks' a lot
 

A:My game idea still needs to be realized.

Read other 15 answers
RELEVANCY SCORE 48.8

So I recently noticed that my hard drive space has been filling up with stuff I can't seem to locate and I don't know if its a virus or if its just something my computer is doing to prepare for the Windows 10 update.
 
Last week it was up to 164 GB but this week it went down to 156, and yesterday I noticed that it went down to 143 GB, up to 145, and stopped at 144.
 
Can somebody help me?

A:Lost 20 GB in the past week

 Most likely this is a result of System Restore.  Windows periodically makes restore points so you have a way to get back to a system you had prior to some problem.  This process takes a percentage of your total hard drive space which you can change if need be.  If you want to see where every bit and byte are going, you can download a program called Treesize and run it. 
 
 Good luck.

Read other 27 answers
RELEVANCY SCORE 48.4

i had purchased computer somewhere around 2011, i had it customised and purchesed the best of everything it cost me $2000.00. So about a year later i had to send it for repair under the replacement plan i bought. i was thinking about selling or trading because it is getting old now(2016) and when i brought it to a computer dealer they started it up and offered me pennies.. i saw specs on the screen and hp had put back in on repair 4 GB ram when its supposed to be 12GB i also had an 17 quad core 2.3 ghz turbo boost but its not listing it as quad core and says max 1.7ghz no turbo and i dont know if graphics card was damaged but i cannot find info on that. my computer is opsilite now but i think hp should put everything on my computer thats suppose to be there but its to old so i think they owe me a new computer for letting me use something all theses years that i paid for but never got to use.. What you think ? i paid $2000.00 and was really using a $1000.00 computer. really really pissed to point unless they give me a brand new awsome computer i will file in small claims court.

Read other answers
RELEVANCY SCORE 48.4

Hi. Currently I really really need your help for solving one of my problem below:
-I have cut one file (>5GB) from file server and past it to my Local Drive (D.

-During that process I got problem with network connection , so the process still ask to retry the process. After the connection is back, then I try to click on Retry and the process is completely finished.

-BUT the problem is both source and destination is empty, no file found.

Did any one know what the problem with this process?
And how can i get my important data back?

Thanks,
SOPHAL.

A:lost data after do cut & past across the network

Hello, and welcome to the forums.

Think you will have a problem retrieving your data, since you cut it, and the connection was lost, id say the files are now corrupt and are lost. So a very little chance of getting it back. Sorry.

Read other 6 answers
RELEVANCY SCORE 48

Hi, I am running Windows XP Service Pack 3. About an hour ago I clicked to download Soundcloud Downloader from CNET. I saw the high rating it had with 102 votes, so I thought the program should be pretty safe, but when I saw the downloader/installer box I started to get nervous. Then I read some of the reviews (which I clearly should have done first) and this one sums it up pretty well:Doesn't work at all and all the 5 star reviews were created by the developer As soon as I read that review I unlugged the internet and clicked on the downloader/installer box to cancel, but I don't know how far it had already gotten in putting files on my computer. How concerned should I be? Could this file download possibly have installed hidden malware?What is the best course of action to keep from having any viruses/malware/rootkits, etc. show up on my computer in a day/week/four months from now?Is just running some virus scans enough?Should I use system restore, and will that prevent anything from this download from still being anywhere deep in the computer? Any help or advice is very appreciated.

A:Started to download Soundcloud Downloader, but realized it could be dangerous

SoundCloudDownloader.exe is a small file (600.84K) and would have downloaded very quickly. The file, if completely downloaded, would have been saved in whatever folder you set up to save your downloads. As an .exe file, it would not have been installed unless you double-clicked on it to install. If you did that...the setup box should have opened with a Welcome to the PC Gizmos Download Manager window and a Next Step button for you to click. You should then have been asked if you wanted to make Bing your search Engine, then to click the Next Step button again to continue installation. If you clicked No thanks, setup is cancelled.You can verify if the program was installed by check Add/Remove Programs in Control Panel.BTW, just because you read a review you did not like means SoundCloudDownloader is a bad (malicious program). CNET uses Secure Download free of malware.CNET Downloads software policiesWe will not list software that contains viruses, Trojan horses, malicious adware, spyware, or other potentially harmful components. We will not list products known to contain such items in instances outside CNET Downloads, and we may disallow products from publishers our editors feel violate the spirit of this policy.Download.com malware policiesWe have always manually evaluated every downloadable Windows product that we list on the site, and since 2005, we've had a zero-tolerance policy that prohibits all undisclosed bundled software and all software that serves browser pop-up ads.W... Read more

Read other 4 answers
RELEVANCY SCORE 48

I want to say thanks for any help offered here! My computer is an ASUS Eee MINI netbook (I do not have a CD drive, nor do I have an external drive). The battery is dead on this netbook, so when we lost power the computer shut off. When I turned it back on it gave me the black screen to choose my start up mode, I chose to start windows normally and it went to boot up into windows, I got the windows screen with the scrolling blue bar... after about a minute it would cycle back to the black screen. I did choose the option to get the blue screen so I could read the error, which is:unmountable_boot_volume0x000000ED,0X8615DE30, 0XC0000006, 0X00000000, 0X00000000I'm not computer savy, but I have done some searching and figured out I need to boot with Windows XP CD - except I do not have a CD (computer came installed with the program) and I do not have a CD drive. I've been trying to find a way/program to get this onto a USB... but this is where I'm running into problems.Also, I can get into my BIOS screen. I CANNOT get into a DOS screen. I CANNOT boot up in safe mode.Thanks!

A:Lost power, now can't get past BSOD (no CD drive)

This could help you.

Read other 9 answers
RELEVANCY SCORE 46.8

My HP Laptop Running Win 7 (64 bit) is now "hanging" after I enter the profile password on startup. Currently running in safe w/ networking. Previously, the machine had "lost" the printer (said it wasn't uninstalled), which I am 'normally' able to correct with a system restart. The non boot is a new development.

Have begun the Malware removal steps, and have the active logs below. Also am running MWAB and have TFC available as well.

DDS (Ver_2011-08-26.01) - NTFSAMD64 NETWORK
Internet Explorer: 8.0.7600.16385 BrowserJavaVersion: 1.6.0_26
Run by Curt at 9:00:36 on 2011-09-08
Microsoft Windows 7 Home Premium 6.1.7600.0.1252.1.1033.18.3836.2657 [GMT -4:00]
.
AV: COMODO Antivirus *Enabled/Updated* {7554F4C5-5EC0-2FC6-8192-8DF831DBED51}
SP: Windows Defender *Enabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
SP: COMODO Defense+ *Enabled/Updated* {CE351521-78FA-2048-BB22-B68A4A5CA7EC}
FW: COMODO Firewall *Enabled* {4D6F75E0-14AF-2E9E-AACD-24CDCF08AA2A}
.
============== Running Processes ===============
.
C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Program Files (x86)\COMODO\COMODO livePCsupport\CLPSLS.exe
C:\Windows\system32\svchost.exe -k RPCSS
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\... Read more

A:Won't Boot Past Profile Password / Had "lost" Printer, previously

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything. We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here. To help Bleeping Computer better assist you please perform the following steps:*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/418037 <<< CLICK THIS LINK If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.*************************************************** If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lo... Read more

Read other 2 answers
RELEVANCY SCORE 46.8

I update and save quite a few files each day, and I can see in File History that there are many saved versions for these files.
This would fill up my backup drive fairly quickly, and therefore, I need to reduce 'Keep saved versions' from the default of 'forever' to about 3 months.  But does this mean that all files older than 3 months will be deleted my File History backup?
 What happens to all my files that have only ever been saved once, but are older than 3 months?  Are these retained in File History or deleted?
The forums on File History do no make this very clear.

Read other answers
RELEVANCY SCORE 46.4

Hello,
 
Okay first of all I would like to say I have been having on going issues for months to almost a year... I have tried everything I can think of... Including wiping harddrives to DoD standards with dban, gparted etc.... I have tried monitering my connections with wireshark...  I have tried several differet anti- (virus and malware) programs including paid version of kaspersky, malwarebytes, bitdefender, eset.....
 
This problem also has involved some black hat hackers compromising my system and bank account, credit card etc all being hit and continueing to do so... I have switched ISPs , changed hardware, thrown away devices including cell phones and laptops... It seems that they were also backdoored into several of my devices and were using several different methods to continue to spread and infect other devices.. These devices include android, iphone, ipod, ipad, netbook, laptop, smart tv and even my dvd player (java).. I have tried to ask for help and seek help for this and no one can figure it out or think this cant be real.
 
I have now thrown out all laptops, and all phones at the same time and started from scratch but having issues on a brand new laptop... I am not sure this is the same issue as before... However, I would like and really appreciate if someone could help me out and view my logs and make sure.. because I have been through hell and back with all these issues.. Loss of finances, time, and sleep... SO, I truly appreciate any and a... Read more

A:Malware, Spyware, And hackers...equals months and months of going insane!! help!

GMER 2.1.19357 - http://www.gmer.net
3rd party scan 2015-06-29 18:38:16
Windows 6.3.9600  x64 \Device\Harddisk0\DR0 -> \Device\00000036 HGST_HTS721075A9E630 rev.JB2OA3J0 698.64GB
Running: 11ybrc3o.exe; Driver: C:\Users\M4M8A\AppData\Local\Temp\kxldypow.sys
---- Modules - GMER 2.1 ----
Module   \SystemRoot\System32\drivers\iaStorA.sys (Intel Rapid Storage Technology driver - x64/Intel Corporation SIGNED)(2014-09-02 06:28:41)                                                fffff800f9c65000-fffff800f9f1b000 (2842624 bytes)
Module   \SystemRoot\system32\DRIVERS\edevmon.sys (Devmon monitor/ESET SIGNED)(2015-01-30 23:13:30)                                                                                          fffff800fa393000-fffff800fa3d2000 (258048 bytes)
Module   \SystemRoo... Read more

Read other 3 answers
RELEVANCY SCORE 39.6

I have traced this down to IE8 I am fairly sure. When I copy a picture from a web page and paste it to Word (Office 2007) it pastes the picture the first time and then when I copy another picture, it pasts the original picture no mater what I try. I just upgraded to a new computer and re-installed my Office 2007 with all the updates. However, since I can use snaget to copy and paste each picture with no problem, I am fairly sure that it is not System 7 or Office 7 that is the problem. I checked out a large number of problems related to IE8 and copy and paste, but none seem to match my problem. I tired to do my original copy and paste of the web page http://www.wolftheatres.com/ which I do to post a copy on the wall for my Grandkids to see what is playing there, and it pasts the text just fine but all the pictures after the first one, were replace with the first picture. And more amazing, when touching on each picture, it shows the picture info as being correct for each different show. Does anyone have a solution to this problem?

A:Copy & past continues to past the same picture

Try disabling add-ons. Also, install Firefox and see if the issue persists using that browser

Read other 1 answers
RELEVANCY SCORE 32.4

Site looks great... But, when you put in OT at work and have a new born at home it's hard to visit your favorite forum.... I had a quicky for the group to help solve - a 3 parter.

1st part - create a user form to display xml data - what is the vba code to display an xml node in a user form text box.

2nd part - create a macro that when run captures the hilighted words in the current PPT slide then displays it in the VBA userform textbox.

3rd part - on the same userform create a button and code that when clicked will add the text from the "selected text" field then add it to the XML doc.

thanks in advance for the input,
Red
 

Read other answers
RELEVANCY SCORE 32.4

This computer got a virus several months ago. It redirects the browser and doesn't allow me to do a lot of things, so I got frustrated back then and stuck it in the closet. I fired it up this morning, deleted a bunch of programs, and decided to give it another try. Here's the DDS Log:

.
DDS (Ver_2011-08-26.01) - NTFSx86
Internet Explorer: 9.0.8112.16421
Run by Marc at 16:40:26 on 2012-06-18
Microsoft? Windows Vista? Home Premium 6.0.6002.2.1252.1.1033.18.3006.1956 [GMT -7:00]
.
SP: Windows Defender *Disabled/Updated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\nvvsvc.exe
C:\Windows\system32\svchost.exe -k rpcss
C:\Windows\1774633010:3443472790.exe
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k GPSvcGroup
C:\Windows\system32\SLsvc.exe
C:\Windows\system32\svchost.exe -k LocalService
C:\Program Files\Dell\DellDock\DockLogin.exe
C:\Windows\system32\svchost.exe -k NetworkService
C:\Program Files\NVIDIA Corporation\Display\NvXDSync.exe
C:\Windows\system32\nvvsvc.exe
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Windows\system32\svchost.exe -k NetworkServiceNetworkRestricted
C:\Windows\system32\svchost.exe ... Read more

A:down for months

I know, being patient is one of the rules, so I apologize in advance. Maybe the title I chose, "down for months" gives the impression that I'm not too interested in resolving this issue - I don't know. I am very interested in getting help with this. I realize this is free voluntary help, and I appreciate that. I noticed that I've had 28 or 29 views, but no one has replied. I'm honestly not trying to seem impatient. Just curious that's all. I have no idea what's wrong with this computer, or how to read that DDS log. My concern is that, since there have been 29 views, I'm assuming those who do know how to read that log have looked at it and decided not to get involved, for whatever reason. If someone who reads the log and doesn't want to help could just leave me a reply saying, "You're screwed - your computer is now an anchor" that would be very much appreciated also.

Thanks again and sorry if I seem impatient. I'm not . . . much

Read other 19 answers