Over 1 million tech questions and answers.

boot failure error code Boihd-4

Q: boot failure error code Boihd-4

Hi,

I keep getting disk boot failure error code Boihd-4. I think it happened because I accidently pressed a wrong button. Formatting the hard drive. I hit continue instead of back. Now the computer keeps asking me to put the system disk in. I keep going back to the page were I made the mistake of pushing the wrong button. before all that happened my computer turned it self off an started looping. Is there anyway to fix this without reformatting my computer. (with Windows Vista 32bit Are there programs that will allow me to download all my files that have.(movies video audio etc.) I have another computer with windows 7.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: boot failure error code Boihd-4

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 69.6

Recently, my computer got infected with a virus, so I booted in safe mode, ran Malywarebytes to get ride of it. I repeatably went into safe mode, scan, log into windows to see of the virus was still there

When it seemed that I finally got ride of the virus in safe mode, I rebooted and received this error message

***STOP 0x0000007B (0XB84C7524, 0x000000E, 0X00000000)

I know 0x0000007B means a boot issue, but I have no idea what those numbers afterwards are.

If someone could point me in the right direction of what this error message means, since I don't want to guess and check, I would be grateful.

A:Meaning of Error Code on failure to boot up

http://www.carrona.org/bsodindx.html
That should help you out a little. Honestly if you just removed a virus I'd say a system critical file may have been altered or deleted. Try using your OS CD to run a repair install, GL.

Read other 4 answers
RELEVANCY SCORE 64

Hello all,

I have a problem with Windows Update agent on Windows 7 SP1 enterprise.
We are using Configuration Manager 1606 and Windows 7 SP1 and about 140 computers works without any problem.
On the other 10 computers I got the following error message in the windowsupdate.log:
WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
WARNING: SOAP Fault: 0x00012c
WARNING:     faultstring:Fault occurred
WARNING:     ErrorCode:InvalidParameters(7)

I've tried several actions although none does any help. Here is the list of actions:
- upgrade windows update agent to the latest version
- windows update agent reset by this instructions https://support.microsoft.com/en-us/help/971058/how-do-i-reset-windows-update-components
- empty Temporary Internet files
- check the rules and blocked traffic on windows firewall and physical firewall between server and workstation vlan
- sfc /scannow

It looks like significant Windows 7 error, although reinstalling is not my option.

Thanks for any help!
GregaR

Read other answers
RELEVANCY SCORE 56.4

As I try to boot my laptop (a different computer than the one on which I have a malware thread ongoing) - IBM Thinkpad T41, I get the message: ERROR - 0200: Failure Fixed Disk: 1. Press F1 to setup, which brings up the IBM bios setup screen - with which I do not know what to do.

While I do have the backup of my user files, I do not have boot/recovery disk, I think. Am searching for something like that...

Any help would be appreciated.
 

A:Solved: Failure to boot: Error 0200 Failure Fixed Disk 1

Read other 14 answers
RELEVANCY SCORE 55.6

I am getting this error code 5D0030009

device initilization failure unable to to access USB

I am running Windows XP on a Dell E521 PC with two gigs of RAM

I cannot get my PC to recognize and install CH products flight sim yoke or CH rudder pedals pro into Microsoft Flight Simulator X

My radio control flight sims won't recognize the flight controller USB devices either
I have no yellow question marks or exclamatin points in device manager

I have one device that is "unknown" shown under game controllers in device manager

Is there an easy fix?
Will a registry cleaner and repair program fix this and if so, which is the best?

Thanks!
 

A:error code initilization failure

Read other 6 answers
RELEVANCY SCORE 55.2

Hi..Recently I have noticed that when I watch YouTube videos. My laptop goes into error. It shows video tdr failure. And also nvlddmkm.sys ... Can I have help with this? My graphics card is Nvidia geforce 420m...Help pls. I'm using windows 10.

A:video tdr failure or nvlddmkm.sys error code

Nvidia ge force GT 420 m*

Read other 1 answers
RELEVANCY SCORE 55.2

First post, thanks in advance for any help.

Problem:

IE 10 update fails to install.

What I've done so far:

Updated all drivers for everything under device manager
Windows fixit program to no avail
Ran selective startup thru msconfig and attempted install to no avail
Installed SURT
Ran sfc /scannow

CBS.zip file attached, I think that's everything from the post instructions.

Thanks again!

A:IE 10 install failure - Error code 9C57

Hello and welcome johnss I saw the previous post back in March where the OP had to do a clean install again.

But I guess that isn't an option for you so is it just an update for the IE10 or the IE10 itself?

Read other 9 answers
RELEVANCY SCORE 55.2

Hello I was wondering if anyone could help me or if anyone has similar issues?

I've been plagued with random restarts from error code 41 - kernel power failure for weeks.

Please don't send me off to the microsoft knowledgebase, that doesn't tell me Jack! especially with the bug check code of "0"

I tried reinstalling windows no joy, so it had to be my PSU right? Even though my 2-3 year old Corsair HX850W with it's 7 year warranty (guess what, I can't find the receipt!) is supposed to be bullet proof. So, new PSU purchased. An Antec Earthwatts 650w. Still the same problem.

I checked the RAM, 4X 2GB sticks, one by one, they all failed on Test 7 of Memtest 86. As did two brand new sticks. A google revealed that that version of Memtest fails on Test 7 regardless. I tried the latest version of Memtest 86+ and all the sticks passed.

I checked all 3 hard drives with Seatools - all 3 were fine.

I've reinstalled windows 7 64 bit Professional yet again and decided not to install any updates.

I installed the latest graphics card driver for my ATI Radeon HD5700 card. That insisted on installing the .net4 framework as well. I restarted and within minutes the computer restarted. It has now randomly locked up.

Linux Mint seems to be working ok. I ran prime 95 on it which was going well but the computer did lock up when it went to the screen saver. I'll give it a try again later on. Otherwise, Mint was fine being left on over night, whereas Windows will shutd... Read more

A:Error Code 41 - Kernel Power Failure

Does your computer turn its self off? or just freeze? Causing the Kernal Power Error?.

Read other 9 answers
RELEVANCY SCORE 55.2

Hi
i can't update IE on several machines (some desktop pc's, some notebooks. different images, but all Win7SP1, 64bit) the IE 10 or IE 11 from IE 9.
we dont have internet on our production LAN, so i want to update via internal WSUS..like other pc's and notebooks in our LAN worked with success.
then i tried with offline installer...also both...IE 10 and IE 11, same failure.
i tried many things:
- uninstall products via FORFILES /P Command and install IE afterwards
- uninstall preReq Updates and install again
- install via Online-Update (Internet)
all done with real PC or a virtuell PC-Image, so i could try the things from begin on new checkpoint.
Done with Local Administrator and Domain-Administrator
i dont know what to do anymore.....
Last thing i tried: reboot - Run KB947821 - reboot - run again, took about 2 hours - reboot - try to run IE install with WSUS

Thanks for help

A:IE 10 or 11 Update Failure with Error Code 9C59

so sad...i hoped somebody had a bit time for my problem...i really dont know how to solve this...

Read other 2 answers
RELEVANCY SCORE 55.2

Hi Microsoft,
I was not able to connect my reliance Pro dongle (DATA CARD) on my computer which shows as " The error code returned on failure is 720" and the same is working on other systems. Just want to know how to fix this issue? Can you please help me out.

Error code returned on failure is 720

Read other answers
RELEVANCY SCORE 55.2

While sending emails to an address within hotmail on a custom domain, I'm receiving the response below intermittently. Emails sent do not contain attachments nor is the recipient's inbox near any "limit" ("outlook 'grows' with my needs").
I've recently archived all the email messages which were in the inbox. No change.
___________________________

This is an automatically generated Delivery Status Notification.

Delivery to the following recipients failed.

       email address at custom domain


Final-Recipient: rfc822;email address at custom domain
Action: failed
Status: 5.2.2
Diagnostic-Code: smtp;552 5.2.2 This message is larger than the current system limit or the recipient's mailbox is full. Create a shorter message body or remove attachments and try sending it again.
_____________________________

Where is the problem?

Les

Read other answers
RELEVANCY SCORE 55.2

Concerning;Title;Windows XP Service Pack 3 (KB936929)Originated;Update History Installation Failure Error Code: 0x80200010 Starting with;Download does not start after you accept the EULA on the Windows Update Web siteI followed instruction to register the files;To resolve this problem, you must reregister the following files:? Msscript.ocx ? Dispex.dll ? Vbscript.dll ? Scrrun.dll by entering >start>run>regsvr32 msscript.ocx,This resulted in a completion or success message, I'm not sure wether this was a register or re-register, . . however please can anyone tell me what I am suppose to do next, as per ;http://support.microsoft.com/kb/836936/en-us4. Click Start, click Control Panel, click Appearance and Themes, click Folder Options, and then click the File Types tab. 5. In the Registered File Types list, click the JS extension, click Advanced, and then click Edit. 6. In the Application to perform action box, type the following command depending on your operating system.? For Microsoft Windows XP, type: C:\WINDOWS\System32\WScript.exe "%1" %* In 5 I did not find the JS extension, ????I did find JSScript Script File, . . . . Is this the same one ????If so does this action apply to all four files, (above) ???

A:Sp 3 Installation Failure Error Code: 0x80200010

I found this; Rename (or just delete) the SoftwareDistribution folder and see if it helps. You can use the procedure described here: http://v5.windowsupdate.microsoft.com/v5co...id=21&ln=en Note that a side effect of renaming or deleting the SoftwareDistribution folder is that you lose your Windows Update History listing (not critical). (later on, you can just delete the renamed SoftwareDistribution folder) http://www.eggheadcafe.com/forumarchives/w...ost24597399.aspBut can not make it out, and can not see the relationship with the, Microsoft Online Assisted Support ?Anyone who can co-relate this in explanation I will be glad to hear from !

Read other 3 answers
RELEVANCY SCORE 54.4

When i try installing Kernel-Mode Driver Framework version 1.11 update for Windows 7 it always fails and gives me an error 8007007e and i honestly dont know what to do. I've been googling aroudn the internet and everything either didn't work or didn't make sense to me and i'm not a tech geek or even near that, so i really need some help.

i am unable to upload my cbs.zip aswell because it exceeds the max mb.

Update for Kernel-Mode Driver Framework version 1.11 for Windows 7 for x64-based Systems (KB2685811)

Installation date: ‎25/‎03/‎2013 7:40 PM

Installation status: Failed

Error details: Code 8007007E

Update type: Recommended

Install this update to resolve issues in Windows. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.2685811

A:Windows update failure error code 8007007e

SFC /SCANNOW Command - System File Checker option two. Any integrity errors?
Open the Windows Update troubleshooter

What is the System Update Readiness Tool?
Post file %SYSTEMROOT%\Logs\CBS\CheckSUR.log afterwards

Read other 8 answers
RELEVANCY SCORE 54.4

I have searched for 3 days for an answer to this problem. I have talked to folks at HP, Tiger Direct, Geek Squad, you name it everyone agreed at first, now I get different answers!!!!! So I come to you.
I have a HP Pavilion dv6324us notebook bought in late 07 with Vista Home Premium, last week I got an imminent hard drive failure, but before I could do anything it just croaked. I had not produced the recovery DVDs. I checked the bios and could not run the HDD test, the answer was no ide detected, also the only boot option was for the DVD drive, no hard drive showed up, (this was the point everyone agreed on, the Hard drive was dead and not being recognized by the system). I bought a new hard drive from Tigerdirect and bought a recovery DVD from HP. I installed the new Seagate Momentous 120 SATA, inserted the recovery CD and things started to happen, Ahhh Bliss, as soon as I click the yes button to install the works WHAM a box with
ERROR CODE 100a if this code persists contact HP. I did, now they think the hard drive is OK, it's the mother board thats bad, or the connector, or the software. I hooked up a usb Drive to see if it reads in the bios and it does. ONE thing I do notice is the new hard drive does not get seen by the bios, so could it be the mother board or the connector? I would really appreciate any help that can be given, I don't want to keep throwing good money after bad, but even better would be to finally get an answer. Thanks

A:Hard Drive Failure and an error 100a code

Hi gw122, welcome to the board.

Sounds like either bad SATA cable, bad connection or port. Have you try a different post? Also, replace SATA cable. Other possibility is your PSU went unstable which causing mb damage. PSUs in all big computer manufacturers are questionable in quality. So HP may be right about the mb is being bad.

Hope this helps.

Bruce

Read other 12 answers
RELEVANCY SCORE 54.4

Hello,
I have been having some trouble with Windows update recently. My CheckSUR.log file says I'm missing 146 CSI Payload Files

I've attached both CBS and CheckSUR log files. Thanks for any help offered!

A:Windows update failure - error code 80073712

Here's the summary from your CheckSUR.log file...

Code:
Summary:
Seconds executed: 889
Found 146 errors
CSI Payload File Missing Total count: 146
This tome indicates that something serious interfered at the crucial time of an update install where the files were being relocated after a reboot - especially as SFC appears to find nothing amiss.

I'll post a fix protocol for the above errors later - but I wouldn't hold out too much hope of its being effective.

Read other 9 answers
RELEVANCY SCORE 54.4

Hi

I presented this Windows Update problem, error code 80070643 to the forum about 18 months ago, and at that time I decided to reinstall W7 as it was the least complex option. The problem I have is a Windows Update failure loop which leads to the failure of all subsequent Windows Updates and also disables System Restore, and the update failure always starts with the .NET Framework update. When this problem started, it occurred every 6 months, so I had no major issues reinstalling just to correct it. Now it is occurring every 2 months, making re-installation unsustainable.

My question is this ? Microsoft kb976982 states that an MSI fix, Microsoft Fixit 50123, should be used first to try to resolve the issue. When I tried to run it, I got the message

?Windows Installer ? this action is only valid for products that are currently installed?.

Visiting Microsoft Help for more info about the Fixit50123, there was this System Tip -

?This article applies to a different version of Windows than the one you are using. Content in this article may not be relevant to you. Visit the Windows 7 Solutions Center?.

Even though there is an MSI.DLL file in W7 system 32, does that mean I do not need this Fixit50123 at all? If so, I can then go ahead and try the uninstall / reinstall the .NET Framework, secure in the knowledge that I did not miss one important step i.e. the MSI Fixit50123.

Thanks

A:W7 Update failure loop, error code 80070643

The type of error message you got often means that you've downloaded the wrong bitness of installer - however, I do mot think that's the case here (as far as I know, there is only one Fixit50123 file)
What I suspect is that there is a failure in dll registration somewhere - and you need to fix that before attempting anything else.
Are you seeing any other symptoms, besides Windows Updates problems?
try this KB article - How do I reset Windows Update components? use the fixit from that and see if it helps (or gives the same message!)

Read other 9 answers
RELEVANCY SCORE 54.4

Hello,
 
I am running Windows 7 Home Premium, Service Pack 1, 64-bit Operating System. My issue is that last night I received 8 important updates though Windows Update to install (Windows Update is set to download updates but let me choose when to install them). When I installed them, only 6 were installed. Two of them, Security Update for Windows 7 for x64-based Systems (KB3088195) and Security Update for Windows 7 for x64-based Systems (KB3097966), will not install. I have repeatedly tried to dl and install them through Windows Update and both of them fail, with "Error code 80073712".
 
When this batch of 8 updates showed up last night, I downloaded all of them and Windows Update only showed it was downloading 6 of them. These last two (KB3088195 & KB3097966) will not download. However, they sit in Windows Update as "2 important updates are available". Windows does not keep trying on its own to download them though, neither at shut down nor does it remind me that I have these 2 updates available to download. They just sit in Windows Update as  "2 important updates are available".
 
I have tried to figure this out for a few hours, but I am not the most computer savvy person. Help would be greatly appreciated.
 

A:Failure to download updates & Error Code 80073712.

Welcome to Bleeping Computer.
 
Download and run the Windows Update Readiness Tool.
 
Let us know how it goes.

Read other 9 answers
RELEVANCY SCORE 54.4

I have a new laptop running Win7 Pro SP1 64-bit as its operating system. It came with IE8. I've been applying the dozens of Windows updates that keep showing up, and they all seemed to apply successfuly until I reached the IE11 update/upgrade. That's when things got weird.

-It kept saying that it had failed, with an error code of 9C48.
-If I restarted, it tried to reinstall the update (which failed) and then when I would re-run Windows Update it would show the IE11 update as an important pending update to be applied.
-However, when I would launch IE and check the "About IE" info, it showed that I was running IE11 not IE8. It was as if it was sort of installed but not fully.

Through internet searching, I stumbled on a couple of your threads. I hadn't read the warning about "don't try acting on advice given to another user" yet so I tried some of the suggestions as follows:
- I installed and ran the System Update Readiness Tool. The CheckSUR and CheckSURpersist logs both show "no errors detected."
-I ran System File Checker (sfc /scannow) and the result was that "Windows Resource Protection did not find any integrity violations." (If I had known about "verify only" I would have run that, but this was my first exposure to this tool.)
-I doublechecked a list of IE11 update prerequisites, and it looked to me as though all the required updates were installed.

Here's where I got brave (or foolhardy?):
-When I scanned some of... Read more

A:Another IE11 Update failure - Error Code 9C48

Here are some of my log files - CheckSUR, CheckSURpersist, IE11_main and windowsupdate.


I assume you may want to see my CBS logs, but I will need some help getting you what you want. I wound up with 1 CBS log and 5 CBSpersist logs, and when I zipped the folder it was 171MB in size which is way too big to upload here. I can try zipping the individual files to see if any of them would be small enough to upload.

FYI, I'm not an IT person and I have minimal experience knowing what I'm seeing when I try to read a log file. So please keep things simple where you can.

Thanks!

Read other 9 answers
RELEVANCY SCORE 54.4

I've exhausted my ability to try to solve this one on my own. I've run all of the automated fixes I can find from Microsoft, so I'm asking for some more targeted help.

I'm running Windows 7 Pro x64 SP1. I have run the System Update Readiness Tool (May '14). It completes successfully, but I don't know what it actually accomplishes because it doesn't make things better as far as I can tell.

Here is my windows update screenshot:
Attachment 330898

Here is what I see when I try to run SFC:
Attachment 330899

Here's my CBS zip file:
Attachment 330900

Thanks in advance for the help. Let me know if there is more info you guys need from me.

A:Windows Update Failure, Error Code 80070002

Hi, Welcome to SF.

Try this,

Windows Update error 80070002 - Windows Help

Read other 9 answers
RELEVANCY SCORE 54.4

I can not for the life of me get SP1 to install. It always gives me the 80070002 error.

I've done what the microsoft help says to do which is clear out my updates list after stopping windows update in services then starting them again but it just produces the same error code.

I've run the system update readiness tool as well as a sfc /scannow and heres the CBS zip, a zip containing all the cbspersists(so I get them both uploaded under the limit) and a screenshot of the error.

This is starting to affect my ability to play newer games giving me 3B bluescreen errors and the like.

Thank you so much in advance for any help you can provide me! -Tera

Attachment 333648

Attachment 333646

Attachment 333647

A:Windows 7 SP1 failure to install, error code 80070002

Consider following the steps mentioned in the below MSFT Knowledge Base article:

Error 0x800B0100 when you try to install Windows Updates or Microsoft Updates

Navigate to the solution available for Windows 7.

Let us know if it helps you.

Read other 4 answers
RELEVANCY SCORE 54.4

Windows Update Failure - Error Code 80073712 . tried everything under the sky. forusm say abotu deleting the pending.xml file , but there is no such file under winsxs folder (windows\winsxs) . The os is VIsta X64 and if we go into windows update screen we see that all teh updates have failed to install. When we try to download the Windows Update Manager for vista x64 while copyign files it gives the same error code. We have even tried running sfc /scannow , it takes some time , completes the verification (100 %) and says that it found corrupt files but failed to reolve the issue. Please suggest..

Just to update we have also tried the following fix :

regsvr32 wuapi.dll
regsvr32 wuaueng.dll
regsvr32 wuaueng1.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wups2.dll
regsvr32 wuweb.dll

still no joy...
Sorry to keep on updating the post .... we have norton internet security on the system. we have not tried disabling the firewall before attempting to register the above files. however , we received no error messages while registering the files. we got confirmation after every file registration that the dll file has been registered successfully

A:Windows Update Failure - Error Code 80073712

I think there is no more step left in the course book .. hence no replies... no worries , i am making our friend run a factory image restore on the hard drive. Windows Mail as always gave me some hiccups while exporting the messages as it came up with an error which said that the external HDD where i was saving the file , was running out of space (Genius!!! , the external HDD has 195 GB of free space and the file we were copying is 296 MB ) or the messages are corrupt. I then had to turn off the UAC, copy the actual Windows Mail folder at a differet location on the HDD and change the file attributes and finally it got copied on the external drive manually(Microsoft should have had reasons to release Widnwos 7).... neways i thank all the viewers for passing by the post and pray to God that i resolve the issue as early as possible.

Read other 10 answers
RELEVANCY SCORE 54.4

I recently switched back to a pc after owning a mac for a couple years and I noticed after 3 weeks of owning it that it had never asked me to install any updates, so i went into windows update and it says it has never been updated. So i click search for updates and it gives me Errors found:Code 800F0900. I have used a registry cleaner (CCleaner), ive installed the system update readiness tool (Feb. 2013 x64), and I've run the microsoft fix it tool. absolutely nothing works. any help is appreciated!
specs are:
Alienware M14X R2
Intel i7 3630QM
NVIDIA 650M 2GB GDDR5
16GB memory
750 HDD+ 32GB SSD (the OS is installed on the HDD)

A:ERROR CODE 800F0900 windows update failure

Hi
 
Are you getting that error for every updates or when installing a specific update ? . Before trying any repair attempts,  uninstall your antivirus software and see if it helps. You can re install it later. 
 
If that didn't solve the issue, please follow the below steps.
 
1 ) Make sure Date, time and region settings are correct.
 
     Make sure your WIndows 7 is SP1 installed. If not download and run the SP1 offline setup.
 
2 )If all areOK download 'Windows Repair ALL in One' from  http://www.tweaking.com/content/page/windows_repair_all_in_one.html
 
3) Install and open the tool. Click next to continue. Go to Step 3 and click on the Do it button to run System File Check.
  
 
4 ) Go to Step 4 and click on the Create button under System Restore.
 

 
5 ) Go to Start Repairs and click on the Start button.
 

 
6 ) If it asks permission to backup registry, allow it to do so. Now you will see the main screen.
 
 
 
Click 'Unselect All' to remove default selection. Now select the following items.
 
 Register system files
 Set Windows services to default start up
 Repair windows Update
 Repair Windows Firewall
 
Now click the start button and repair will start. It may take sometime to finish. If it asks for permission to restart, allow it to d... Read more

Read other 16 answers
RELEVANCY SCORE 54.4

Hello.

I'm running Windows 2000 on my p.c. (using the laptop now) and am getting "inaccessible boot device error number 4096".

I can get as far as the safe mode options but am taken straight back to the blue screen.

The message also says that if this is the first time this error has occurred, to use CHKDSK /F as file \i386\biosinfo.could not be loaded.

There are two hard drives in the computer and I presume it's the old one,
containing the operating system, that's failed.

Using AVG Antivirus and Zone Alarm.

Thanks for any help you might be able to give.

Penny
 

A:Hard Drive Failure? Error Code: 4096

Read other 7 answers
RELEVANCY SCORE 54.4

After a reset of my laptop, Windows isn't activating.   I'm getting the error 0xC004C003: The activation server determined the specified product key has been blocked.  I talked to Microsoft support; the first person dircted me to activate Windows by phone (which didn't work), and the second told me to contact the maker of my laptop (HP).  Judging by other forum posts regarding this subject, HP needs to give me a new Windows product key.   Any and all help would be appreciated - I'm hyped for Windows 10 and I don't want that unactivated when I upgrade.

A:Windows 8 Activation Failure - Error Code 0xC004C003

Hi Please find the link given below might help ou to fix your issue. https://support.microsoft.com/en-us/kb/978305

Read other 4 answers
RELEVANCY SCORE 54

Hi all, Please i'm having troubles repairing my laptop after receiving error code 0xc000034 on Windows 10.  Automatic repair don't work and after running hard drive extensive test, this was the results that i had;  Hard drive SMART Check: PASSEDHard drive Short DST Check: PASSEDHard drive Optimised DST Check: FAILED FAILURE ID: 9LPFPD-7MB8JB-MFPWLJ-61QF03 Can you please assit since i don't want to format the drive. Regards, Kofi  

Read other answers
RELEVANCY SCORE 54

Hi, I am getting repeated failure of installation of the above package, necessary for the Windows 10 update next month. Every night the package tries to install, and then fails, reverting the changes and restarting a few times in the process. After Windows finally boots, in "Update History" it is shown as failed, however when I look at the list of installed updates it is there! But still regardless of this Windows Update tries to download and install.

What I have tried so far:

1) Uninstalling the update from Control Panel > Windows Update > List of Installed Updates
2) Uninstalling and re-installing .NET 4.5.2 (I saw this advice on a previous post)
3) After this Searching for updates again and installing

Unfortunately the same update failed and the same error code was reported.
I have downloaded the update file from Microsoft and was considering doing a manual install after uninstalling it again, but I'm not sure this is going to work, and it is frustrating seeing as the attempted install/failure/revert process takes about 30 mins. So I thought I would post here for help.

Here is a dropbox link to the CBS logs zip. (it's too large to attach)

https://www.dropbox.com/s/c4enq0gr4w96lae/CBS.zip?dl=0

In addition, here is a link to the C:\Windows\windowsupdate.log file should you require it:

https://www.dropbox.com/s/7gtr2l3fpv...pdate.log?dl=0

Any help would be gratefully received!

Thanks

Matt

A:Another case of failure with update KB2952664 - Error Code 8004402F

In addition, here is a link to the C:\Windows\windowsupdate.log file should you require it:

https://www.dropbox.com/s/7gtr2l3fpv...pdate.log?dl=0

Read other 9 answers
RELEVANCY SCORE 54

Hi

I'm using Win 7 x64
I've got a problem with KB2937610 for over a month.
I've tried to install it manually, use MSFixit and install it from clean boot. Neither worked.
Recently I found this forum, so here I am to ask for help.
(I'm sorry if I made any grammar mistakes, my English isn't prefect).

A:Windows Update KB2937610 failure; error code 800B0100

You have some missing OS files as well - but here's the summary from the CheckSUR log...

Code:
Unavailable repair files:
servicing\packages\Package_1_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_2_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_for_KB2937610_SP1~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.mum
servicing\packages\Package_1_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.cat
servicing\packages\Package_2_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.cat
servicing\packages\Package_for_KB2937610_SP1~31bf3856ad364e35~amd64~~6.1.1.3.cat
servicing\packages\Package_for_KB2937610~31bf3856ad364e35~amd64~~6.1.1.3.cat
I'll post a fix protocol when I can get to it - probably tomorrow.

Then we'll need to fix the other errors.

Code:
Checking Component Store
(f) CSI Payload File Missing 0x00000000 system.data.sqlxml.resources.dll msil_system.data.sqlxml.resources_b77a5c561934e089_6.1.7601.17514_pl-pl_fab1504c7d13b602
(f) CSI Payload File Missing 0x00000000 system.data.sqlxml.resources.dll msil_system.data.sqlxml.resources_b77a5c561934e089_6.1.7601.18156_pl-pl_fab5265a7d104a83
(f) CSI Payload File Missing 0x00000000 system.data.sqlxml.resources.dll msil_system.data.sqlxml.resources_b77a5c561934e089_6.1.7601.22326_pl-pl_e3e47e9896ba5ed5
(amongst other possible ones - more later)

Read other 7 answers
RELEVANCY SCORE 54

Hi
Windows Update has been trying to install the same 9 updates now since yesterday. Prior to that it's updated with no problems. It goes through all the motions, including having to restart the computer to finalize the updates and it goes through that also, then the Update window says it failed and the error code.
WU then starts the whole thing all over again. Right now it's still on my taskbar and the restart button on the pc has the WU icon ready to finalize after restarting.

I've followed the directions in the Windows UPdate Posting Instructions.

Error code: 80070308

Enclosed is the sfcdetails.txt

I cannot upload the CBS.zip though. I've tried several times and it's not completing. After a few minutes waiting while it says 'File uploading...please wait' the little window goes from that file attachment to a generic page saying
This page cannot be displayed.
<LI id=task1-1>Make sure the web address http://www.sevenforums.com is correct.<LI id=task1-2>Look for the page with your search engine.<LI id=task1-3>Refresh the page in a few minutes.

Thanks

A:Windows Update Failure to install, error code 80070308

llanita take a look at this Windows 7 update fails with code 80070308 - Microsoft Community

Personally I set my updates to let me know they are available and I look at them before I install anything. But it is a personal choice my thoughts are that given updates can cause problems I like to know what I have downloaded and then can go back to dedicated update points get rid of problems. see pic

Having posted the above I think these would not be a bad thing to try

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < use the /f option in Option 2 ifnecessary

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

download from bleeping computer ? delete any rubbishthese find.

Read other 9 answers
RELEVANCY SCORE 54

New here and need help,
Windows Update KB2937610 failure; error code 800B0100
No idea what went wrong, check sur gives

=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 25.0
2014-09-30 13:13

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_1_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_1_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_8_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_8_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_for_KB2937610_SP1~31bf3856ad364e35~x86~~6.1.1.3.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_for_KB2937610_SP1~31bf3856ad364e35~x86~~6.1.1.3.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_for_KB2937610~31bf3856ad364e35~x86~~6.1.1.3.cat

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store

Summary:
Secon... Read more

A:A new Windows Update KB2937610 failure; error code 800B0100

You can try this page?
Windows Update error 800B0100 - Windows Help

Read other 5 answers
RELEVANCY SCORE 54

Please could anyone help?

I have a HP6530b which goes into sleep mode regular and at that point blue screens saying with" Error Code 0x09F DRIVER STATE POWER FAILURE"

Latest Mini Dump file attached

Thankyou
 

A:Error code 0x09F driver state power failure

Your error is 0x0000009F: DRIVER_POWER_STATE_FAILURE
A driver is in an inconsistent or invalid power state. Typically occurs during events that involve power state transitions, such as shutting down, or moving into or out of standby or hibernate mode.


The specific driver cited as the cause of your issues is accelerometer.sys and it belongs to Hewlet-Pacard software.

Here is a link to a more descriptive explanation: http://www.runscanner.net/lib/Accelerometer.sys.html
 

Read other 1 answers
RELEVANCY SCORE 54

Hi,
I have a DELL XPS8500 desktop and I have this error code: 2000-0142. I know it means that the HD needs to be replaced. When I chose to boot in partition, I do see the C disk so I'm still confident to be able to recover personal datas at some point but that the Windows booting partition is damaged....
I don't have any recovery nor Windows hardcopy but went from Windows 7 to 10 a few months ago.
I downloaded the Windows Media to create a Windows.ISO on a DVD or USB drive.
I tried to boot from the DVD but it failed to reactivate and reinstalled Windows as I guess the Internal HD is really screwed.
My questions:
- If I install a new HD, should it be straight foward to reinstalled Window by booting from the media DVD?
- Could my damage HD could be access as a ''standard drive after'' as I guess that it may be hopefully just the Windows partition that is damaged.......
Does Dell can supply a Recovery with my Service tag and Express service code?
 
Thanks in advance for any thoughts.
 
 

A:HARD DRIVE FAILURE ERROR CODE 2000-0142

If you've already activated 10 on the system, you can reinstall it at any time.  You'll need the same version (10 or 10 Pro) you had - you can get the ISO from Microsoft and put it on a flash drive to do the installation.  Once 10 is activated, you have a digital entitlement on the system that allows reinstallation.
It is better to remove the faulty drive from the system and reconnect it once you have WIndows reloaded - to try and copy the data.

Read other 2 answers
RELEVANCY SCORE 54

product hp pavilion a 633 of PC. Windows vista. My system ran the usual test and it failed the surface scan test. An error code was supplied - hd 535 - 2w. What does this mean and how do I correct the problem? I'm not very good with computers. Any help would be appreciated. Have a great day. Thanks for your time. Pam

A:surface scan test failure - error code hd535-2w

teddy249100 wrote: product hp pavilion a 633 of PC. Windows vista. My system ran the usual test and it failed the surface scan test. An error code was supplied - hd 535 - 2w. What does this mean and how do I correct the problem? I'm not very good with computers. Any help would be appreciated. Have a great day. Thanks for your time. PamHello teddy249100, This message appears to be a warning that the hard drive is failing. I would backup my data as soon as possible. You should also have a set of HP Recovery Restore disk, since if the hard drive fails, you would need these Recovery disk set to reinsatll the operating system and all your software that came with the HP system. Here  is a link that has some information on this issue. 

Read other 9 answers
RELEVANCY SCORE 54

Hello,

I am having Dell XPS M1330, Operating System- Windows Vista. Don't know how my laptop is not able to boot, whenever i start it shows BIOS written under it and Dell logo appears and everything goes blank and error code 2000-0146 internal hdd read failure appears.

I don't know what is happening how this problem come into my laptop and what i will do as i am having very important data store in it.

Please help me in fixing the problem or either let me know the way how i can recover my data atleast.
 

A:Error code 2000-0146 internal hdd read failure

Your hard drive has died, I hope you made backups.
If the machine is still under warranty Dell will send a replacement.
You may be able to hook up the drive as a slave in another machine and access the data but it can be hit and miss, there is third party software that can locate data from failed drives but it does depend on how bad the drive is.
The only other way is to send the drive to a lab that specialises in data recovery, but it can be expensive
 

Read other 2 answers
RELEVANCY SCORE 53.2

Hi!

I'm having trouble installing my authentic copy of Microsoft Office 2007 Ultimate. I use Windows Vista Business, and everything else runs ok. The install fails approximately 20% into the process, and shows the message:

Error 2203. An internal error has occurred. (C:\Windows\Installer\986af5.msi - 2147287008) Contact Microsoft Product Support Services (PSS) for assistance. Following this message are some instructions on how to contact PSS.

I have noticed the file name changes each time - might this mean that setup gets a little further each time I attempt the installation?

Would appreciate any assistance on this matter. Thanks in advance!

Liam.
 

A:Solved: Office 2007 - Setup failure - Error code 2203

Hey All,

Just FYI, The error was being caused by my anti-virus software interfering. I happen to use CA anti-virus, and simply snoozing this application was sufficient to allow setup to proceed.

Thanks,

Liam.
 

Read other 1 answers
RELEVANCY SCORE 53.2

I can't install my audio driver after upgrading to Windows 7 Ultimate x64! I run a Lenovo Y550, my drivers can be found here. When it starts installing, an error pops up and says:Install Realtek HD Audio Driver Failure !![Error Code : -0001] Any help will be real apreciated.

A:Install Realtek HD Audio Driver Failure !! [Error Code : -0001]

try "run as admin"any error code like 0x000005g4?

Read other 9 answers
RELEVANCY SCORE 53.2

I have a challenge on how to resolve unhandled exception catastrophic failure error code 0x8000FFFF. I was trying to install a POS software i got from AccuPOS. Its actually a trial software which i downloaded from their site. Upon the completion of the installation then the message appeared " unhandled exception. catastrophic failure error code 0x8000FFFF. Please i need help on how to fix the problem. thanks

A:how to resolve unhandled exception catastrophic failure error code 0x8000FFFF

That message usually means the hard drive partition is "dirty" (ie contains errors).
Run the error checker to detect and repair errors to the file system.

Right-click the hard drive icon & select "Properties".
Click the "Tools" tab.
Click "Check Now".
Tick both options, then click Start.
If the drive is the system drive (ie has Windows installed on it), you'll need to click "Schedule disk check".
Now restart Windows & the disk check will run before Windows loads.

Read other 2 answers
RELEVANCY SCORE 53.2

Hi, Greetinds!

My OS is Windows 7 x64. Since March 2014 I updated my Windows 7 Home Premium to Windows 7 Professional online, except to the Security Update for the below followings failed to installed (Error Code 80000FFFF):

Internet Explorer 11,
Microsoft.NET Framework 3.5.1,
KB2862330, KB2862973, 2912390, 2916036, 2929961, 2930275, 2483630, 2913431, 2918077, 2919469, 2923545, 2929733, 2929755.

I had ran the followings fix:
Microsoft Fix it 50202,
Hotfix for Windows (KB947821) &

sfc /scannow, then follow by

1. Manually reset Windows Update components (How do I reset Windows Update components?), the following commands at a command prompt results shown:

The module " for the 4 following " was loaded but the entry-point DllRegisterServer was not found
regsvr32.exe mshtml.dll
regsvr32.exe shdocvw.dll
regsvr32.exe browseui.dll
regsvr32.exe qmgr.dll

The mould " for the 9 following " failed to load
regsvr32.exe msxml.dll
regsvr32.exe gpkcsp.dll
regsvr32.exe sccbase.dll
regsvr32.exe slbcsp.dll
regsvr32.exe initpki.dll
regsvr32.exe wuaueng1.dll
regsvr32.exe wucltui.dll
regsvr32.exe wuweb.dll
regsvr32.exe muweb.dll

2. MicrosoftWindowsUpdateAutoDiagnostic (Problem Found: Check for missing or corrupt files - Detected & Problem installing recent updates - Not fixed)

With the above solutions but the problem is still persisted. I Need someone help?

At... Read more

A:Windows 7 Professional Security Update failure (Error Code 80000ffff)

.NET 3.5 is part ofWindows 7 - so we can't use the usual trick of uninstalling/cleaning it out.

There are a mass of what appear to be simple download failures in the update log file - but nothing informative in the CBS.log file
These failures relate to updates as early as KB2862973.

Please run the CheckSUR tool, and post the CheckSUR.log file


Please download and save the CheckSUR tool from http://support.microsoft.com/kb/947821
(you'll need to look in the details for Windows 7, downloading from the Microsoft Download Center)

Run it - The tool can take anywhere from 5 mins to a couple of hours to run (or 'Install') depending on how much it has to do, and may exit silently - it may appear to freeze for most of that time, but be patient.
The result is logged in the C:\Windows\Logs\CBS\CheckSUR.log file - and an archive …\checksur.persist.log file

Then zip the CheckSUR.log and upload it to your reply.

Read other 8 answers
RELEVANCY SCORE 53.2

Been trying since 9/21 to install these two updates. I have tried the solutions suggested at Microsoft Community to no avail. I was able to install a Win Defender update today, but not these two. Anyone else having this problem? Any ideas to fix the problem? Thanks.

A:Windows Update (KB2744842, KB2732059) Failure, Error Code 80070643

Welcome to the Seven Forums.

While I understand that you "have tried the solutions suggested at Microsoft Community to no avail", I have no way of knowing what suggestions those are, so I fear that I'll be repeating suggestions.

Have you run the automated tool from here:
How do I reset Windows Update components?

Read other 6 answers
RELEVANCY SCORE 53.2

Hi I am new here, sorry if I am posting this in the wrong area.

I recently purchased an ASUS G1S and been getting bluescreen with the Error Code 0x09F DRIVER STATE POWER FAILURE. This has happened three times already. But every occurrence happens after I switch my laptop out of sleep mode.

1st time
After waking up my laptop I played a DVD in Window Media Center, but after the first 10-15 min, i received a bluescreen.

2nd time
I put my laptop on sleep mode while a DivX video on stage6 was playing, after waking the laptop up the video continued to play, but after 10-15 min the same bluescreen with a DRIVER POWER FAILURE error occurred.

3rd time
I thought it was the nVidia display driver, so I decided to go to laptopvideo2go.com and installed the latest WHQL driver for Vista 32 bit which is 167.43. But after putting the laptop to sleep with Divx video actively playing the same bluescreen appears after 10-15 min of waking the laptop.

In regard to the DivX videos I found out that if I initialize them (play them) after waking my laptop from sleep mode no bluescreen occurs but if I put the laptop to sleep with an active DivX video the system would crash after waking the laptop.

Now another strange things was during the first 10-15 min of video playing the audio was distorted and skipped in some part, like playing music from a scratched CD. In every situation about a few second before the bluescreen the audio would repeat itself, kind of like when a video free... Read more

A:BlueScreen Error code 0x09F DRIVER STATE POWER FAILURE

Read this link carefully: http://support.microsoft.com/?kbid=246243&sd=RMVP

Also, if you can attach your minidumps we may be able to zero in on the cause of your crashes.

How to find your minidumps:

My Computer > C Drive > Windows Folder > Minidump Folder > Minidump Files. It is these files that we need you to attach to your next posting, NOT the whole folder.

Below your reply screen is the Additional Options screen. Notice the Manage Attachment button.
 

Read other 11 answers
RELEVANCY SCORE 52.8

ok so ive got this gateway solo 1450 laptop and i got this error. PXE-E61 Media Test Failure, Check Cable" Error Message. i went into the bios and got nothing out of changing the boot order or resetign to system defaults. there was a few times where i was able to get past that error and it went into the screen where it asks how you want to boot up. last known good config, start windows normally. safe mode, safe mode w/ command prompt, Etc. i really need to get this working any help is appreciated. thank you.

i am also running windows XP home... i think.
 

A:Solved: PXE-E61 Media Test Failure, Check Cable" Error code

You're trying to do a PXE boot (which is boot from a network server) and you don't have your network cable connected.

Are you trying to PXE boot? If not, you usually can completely disable PXE in your BIOS. If you don't need it, disable it. If you do, make sure that you are plugged in to your network before turning your computer on.
 

Read other 1 answers
RELEVANCY SCORE 52.4

I was using the Internet until it froze on me, the next I know, there's a blue screen and then it shut off. When I restarted the computer, it brings me to a black screen which has two codes
PXE-E61: media test failure, check cable
PXE-M0F: Exiting PXE ROM.
I'm only able to do F2 which brings me to a menu screen called: PhoenixBIOS Setup Utility and F12 the restore option. it will not restore. When F12 is selected, it brings me to the Boot Menu which displays:
LAN (in white)
CD/DVD DVD/CDRW UJDA770- (SM) (in blue)
<Enter Setup>
but when selected, instead of restoring, it brings me back to the black screen. HELP!
 

A:Solved: Stuck at black screen, won't restore! Error Code: PXE-E61 media test failure

Read other 6 answers
RELEVANCY SCORE 52

Hello,

I really hope one of you fine people can help me out.

Last night I was browsing facebook and my computer froze up. I tried to reboot it and it wouldn't load pass the windows logo.

It will however let me get into Safe mode.

Here is what I have tried:

- Restore to earlier date: I do not have one created as I recently restored my computer to factory setting (about a week ago)
- Malware scan with Malwarebytes: nothing found
- Memory Check - looks good
- Chckdsk - all went well
- Startup repair - Gave me errors and couldn't fix the problem. here is what the log showed:



Any help would be super appreciated.. i am very frustrated with this right now :(

Thanks!

A:PC wont boot pass Windows logo. Will boot in safe mode. Error code given. Please help

Which CHKDSK did you perform? /F or /R?

Read other 6 answers
RELEVANCY SCORE 51.6

Hello,
Today morning when I turn on my laptop, I got an error from Intel Rapid Storage that the laptop may fail and I must take a bacjup. I tried running Boot time Diagnostic and it gave me following message:
Error Code 2000-0151
Validation 116622
Msg: Hard Drive 0 - S/N W0VAY77L, Incorrect status = 3E 
SMART Predictive Failure.
Please guide me if HD need to be replaced. My laptop is under warranty.

A:Error Code 2000-0151 - Hard Drive incorrect status 3E Smart Predicitve Failure

Hi navedalamalam,
2000-0151 error indicates your hard disk drive (HDD) has failed and may be nearing the end of its life. Please backup the data from the system if it’s booting up. Please enter your service tag # on the link below, select the OS, then download the BIOS from BIOS section onto the system and install it. Then run the diagnostics again.
http://dell.to/18r60nI
Please refer to the video in the link below for updating the BIOS.
http://dell.to/164n7sH
Please let me know if this helps.

Read other 4 answers
RELEVANCY SCORE 50.8

Windows 8, "File: \BCD Error Code: 0xc0000034"


Good Day Everyone,

Trying to resolve this error:



I have a Window 8 recovery USB and a Windows 8.1 recovery USB both from another laptop...

Mine are 32 bit machines, if the laptop i am working on is 64 bit will it boot on my USB recovery that is from a 32 bit machine? My buddy doesn't know if this troubled laptop is 32 or 64 bit

When I use the recovery usb and try a refresh or a comlete format it comes back telling me the drive is locked and stops in its tracks.

Also from a the dos command window (from the recover usb advanced option section) i have tried the following with NO success...

Bootrec /fixmbr - successful but didn't help
Bootrec Fixboot - successful but didn't help
Bootrec - RebuildBCD - Goes off searching, comes back with 1> C:windows, I type Y to add it but it comes back with an error "The requested system device can not be found"

I also tried BCDboot c:\windows\ /s c: /l en-us - said it was successful but still didnt fix the boot problem.

So i am not sure if I am running into a 32 bit vs 64 bit issue or if i need to find a way to unlock my drive so the refresh will work?? Or...?????

Any help or direction would be greatly appreciated!!

This is on an Acer Aspire V3-551

Regards,
Darren Vaillant

A:Windows 8 -Boot Error -> File: \BCD Error code: 0xc0000034

Anyone???

Read other 2 answers
RELEVANCY SCORE 50.8

My  HP Envy sleekbook 4-1200eo came with windows 8.0 and was uppdated to 8.1 and later with windows 10 preview. All has been working ok until a month ago. Have been trying to boot again and managed to get as far as the final of installing windows 10. After that it says bcd error 0x0000034, need to contact supplier etc...Now I can only start and se the content of f1 and f2 keys ( ie computer installations and repectively diagnosticss test) but not enter the f9,f10 and f11 which contains the menues for rebooting. I cannot install w10 with a download from microsoft page, the computer just won´t recognize the memory stick. Nothing happens.Pls someone, help me out 

Read other answers
RELEVANCY SCORE 50.8

My  HP Envy sleekbook 4-1200eo came with windows 8.0 and was uppdated to 8.1 and later with windows 10 preview. All has been working ok until a month ago. Have been trying to boot again and managed to get as far as the final of installing windows 10. After that it says bcd error 0x0000034, need to contact supplier etc...Now I can only start and se the content of f1 and f2 keys ( ie computer installations and repectively diagnosticss test) but not enter the f9,f10 and f11 which contains the menues for rebooting. I cannot install w10 with a download from microsoft page, the computer just won´t recognize the memory stick. Nothing happens.Pls someone, help me out 

Read other answers