Over 1 million tech questions and answers.

Different power board on monitor

Q: Different power board on monitor

Hi all, I have monitor gericom 2030 and it has some power board model that I cant find on sell, so I have buy one that is almost same with it. 4 plugs for invetors are same but one connection for t-con board is diffrent and on oroginal board I have pins (5V, 5v, GND, GND, 12v, BL, N/F) and on board that I have buy has ( 12v, 12v, GND, GND, 5v, 5v, GND, N.C, ON, DIM, MS ) So any suggests wich on wich one I should connect?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Different power board on monitor

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 56.8

amd xp 1700(palomino) on a ga-7vt600, winxp sp2

i upgraded video/ram in my computer and now i can't even get the old(what was replaced) stuff to work. here's a few things to list:

install new vid card, update drivers/settings, reboot no picture to monitor.
unistall/reinstall card, boot and monitor has picture.
install another gig of ram, boot no picture.
take new ram out, boot no picture.
take new card out, put new card in, boot no picture.
take new card out, put old card in, boot no picture.
take all memory out, try known good stick in all slots, boot and no picture.
put all back in, boot, no picture.
turn power on and watch the led fans run on my 15lb paper weight.

it's a never ending combination that i've tried here and i cannot get a picture on this monitor. i've swapped monitors around and all are good, i've put components from this computer into another computer and they all worked. something is not letting this thing boot up, i get no picture to the screen and no beeps sounds or anything else, i turn the computer on and you hear the fans, hard drives, and burners powering up and everything, but there is no picture going to the monitor. it sounded like bad memory because i ran into a case of that before but all the components still work when placed into the other computer. my last guess is the board has gone sour. i was reading other posts and people have mentioned the power supply, but where do i check that at? it's a codegen 350w ... Read more

A:Last call for fix ideas(power/board issue?)....before I get a new board (Long Thread)

Read other 11 answers
RELEVANCY SCORE 55.2

My Yoga S1 has contradictory, intermittent power issues that I'm trying to chase down. Culprits are bad power bric/cord/plug or power socket on mother board or power board that feeds into power button/led on. One day it blacked out and wouldn't restart to hard drive or windows stage. I did get an error code which I can't remember 5100 or 5500 poss?, that seemed to indicate the power board or ribbons to that needed replacement or re-attachment. So fiddled with it and it did fire up in windows all ok. Then ran out of power and died again. power button wouldn't light up. plugging in power unit did light up led as getting charge. Left it overnight and then it miraculously charged up. pushed power button light up twice then nothing. took out power board/detached ribbon, then it fired up to windows, fixed some hd errors and has been restarting without problems. Except now there is no plug showing on battery icon when plugged in. So not recharging but I'm sure the battery is good. And logically, the power brick and plug must be feeding electricity into laptop to get it to recharge enough to start up. So power socket and plug may be suspect with intermittent contact problems. Or the power board somehow is involved in this? I've ordered a new powerboard as easy screw in and cheap. My question about powerboard is does this control ability of plug to charge battery? power brick with new plug is next order from ebay. but the power socket, which see... Read more

Read other answers
RELEVANCY SCORE 51.6

So Dell made a really terrible decision.  They have a transparent strip in the power button for an LED light to indicate if the power is on.  A power indicator is a given in any laptop, no matter how cheap it is.  However, Dell in all of it's genius decided to not include an LED bulb on laptops up to the Inspiron 7000 Series, despite leaving a transparent slot for it.  Seriously, what happened to this brand?!?  Do children make these laptops now?
I want to fix this, as my laptop is no longer returnable and a power indicator is absolutely necessary.  So the only thing I can think of is replacing it with one from the 7000 Series somehow (with some help probably).
This is a Dell Inspiron 5559.  I also have an Inspiron 5547.  Not sure which exact 7000 model I should get the part for...
Are they compatible?
Is there an easier way? Like how Fn+H turns on the hard drive indicator?
Thanks.

A:Can I replace a Dell Inspiron 15 5000 Series power board with a Dell Inspiron 15 7000 Series power board?

The systems use different case and mainboard designs -- and may even be made by different companies.  The answer in all likelihood is no.
I don't think Apple has produced a Macbook with a power indicator -- the PC vendors are playing follow Apple.

Read other 1 answers
RELEVANCY SCORE 48

Older Dell Optiplex GX260 tower model. Okay first I extra a harddrive from an HP older system that had just recently crashed. Now I want to read that drive right? I put it in as a 2nd drive in my Dell Optiplex system, set the jumper to cable selected, go into BIOS and select my 1st drive to show it as AUTO. I hit Save changes, upon rebooting it, it gets to the end of logo display and freezes. Weird, never saw that before, I think crap maybe the IDE cable is set wrong or something. I remove the cable and molex plugs from both HDD's after the power is off and set it back to the way it was.

When I reboot I get to the end of the logo again and it freezes and I can't even get into BIOS. Very strange. Well I go back again to check my work and see it is fine with how the IDE cable is sitting and the Molex plug. Now the system won't even power on. The light to the MOBO is on but the system won't start. I undo the front panel and work to see if the cable is worn but it is not and it appears to be fine. The light to the signal will not work to go green at all.

What do you think could be most common issue of this and why? I don't have a multimeter to test the system with and I don't know if it's more than a passing problem. I have never encountered anything like this were a system worked fine then you attempted to just read a 2nd HDD and it started to cascade a bunch of problems to the system.

Any help or ideas are much appreciated, thanks.
 

A:Power light won't come on, power to board

Read other 7 answers
RELEVANCY SCORE 46.8

I am currently using an Asus Sli-deluxe motherboard with an x1800xt videocard. I already have a 6-pin connected to the videocard but theres also a spot on the motherboard for a standard 4-pin connector from the psu. (4-pin just like the hard drive power connectors) Will connecting my psu to this 4-pin plug be helpful to maximize and stablize the performance of my card or am i fine with the direct 6-pin already?
 

A:More power to the board to help?

plug the 4-pin plug in, it is suppose to be there and will help every thing and yes the 6-pin needs to be plugged in.
 

Read other 1 answers
RELEVANCY SCORE 46.8

I just bought a Soltek SL-k8av2-rl Rev:LB for my brand new AMD Athlon 64 +3000 Socket 754. I am using a NVIDEA FX 5200 128mg video card that was working on my previous board moments before install on this board. I am also putting it in my case that I have been using with a ANTEC SP350 power supply. (the previous setup was a 2.4ghz setup so I am sure it is enough power)
The problem is that when I turn it on everything seems to get power...the fans start and the hard drive light stays on but no video, no post and NO BEEPS.
The most baffling part is that I am not using the power button..It is doing this when the switch on the back of the power supply is flipped. The power button for the case is not working at all...on or off. I know that it is good because as I said it was working only moments before the transition.
I know this has got to be something simple that I am just missing but I am completely baffled.
Please help!!
 

A:Board has power but nothing else, what's going on?

Have you remembered to plug in the auxillary 4 pin 12 volt power connector to the socket near the CPU if it has one? Is the CPU installed correctly and is it's fan plugged into the motherboard?
 

Read other 5 answers
RELEVANCY SCORE 46.4

hi,
i need help please. my cpu is not switching on , but the motherboard get power , which i can say since , the keyboard ,mouse light glows and i can charge thorough my usb ports , but the cpu fan starts to run and stops abruptly .

can anyone tell where the problem , in PSU or motherboard or the HSF or any other place so i change it .

please help me guys....
 

A:cpu would not switch on, but board gets power.

You need to post your system component specs. Motherboard; EXACT make, model and revision (if applicable). Processor; EXACT make, model and stepping. Memory; EXACT make and model. Graphics Card (if installed); EXACT make and model. Power Supply; EXACT make and model. Provide links to the components.

No one can possibly diagnose a problem without knowing the EXACT components you used in the build.

If the machine is a mass produced machine such as Dell, Gateway, HP, etc. post the EXACT make and model.
 

Read other 3 answers
RELEVANCY SCORE 46.4

Hi everyone!

First I want to thank you for the great job you do in this forum!​ ​ I have a PackardBell Vesuvio laptop. I had problems with the previous motherboard (it couldn't power on) so I bought a used board in eBay.​
But this one has a strange problem; it can't power up if the power cable is plugged in (with battery inserted)! If I remove the power cable, it can boot up and works fine. After powering on successfully, I can insert the power cable and battery begin to charge without any problem. The power supply is ok (it outputs 19V, as it should). Is it possible that something inside the laptop is being shorted out when I plug the power, preventing the laptop to boot up?

I don't know if the used motherboard I bought was faulty or something else is happening. All other components seem to work fine.

I'd be grateful if you have any ideas about this problem!​
 

A:Board doesn't power on

I don't work much with laptops, but power related issues are generally a motherboard function. If a laptop boots with/without a battery, or with/without AC connected, it typically implies a motherboard malfunction.

Hopefully someone with more experience can confirm.
 

Read other 1 answers
RELEVANCY SCORE 46.4

Hello!
I've decided to upgrade my Alienware X51 R1 (i7, 16Gb RAM, GTX 660) to a latest videocard that my system can use: GTX 970. But I know about some problems with this: the original powerboard that came with R1 version is not proper working with theese videocards. So I've already know that I just need to swap poverboard from R1 to R2. The art of it in Dell spare parts is D85RT.
I've tried to chat to Dell support North america, so thay told me it's not a problem to buy it in US and Canada, but they cannot sell and send it to me...
So where, how can I buy it in Russia and what's the price of it.
Thanks.

Read other answers
RELEVANCY SCORE 46.4

Good day,Can you kindly refer me to a store in South Africa preferably in Pretoria were I can buy a "Power Button Board" for Notebook 15-r117ni.Looking forward to hearing from you soonKind regards,Kgotso

Read other answers
RELEVANCY SCORE 46.4

I know this is a windows forum but there are so many people who are hardware guru's as well as windows' so sorry for those whom are offended...

I have a power supply and want to see if it works without having to disconnect my power supply presently in my computer. I remember when I bought it from the display at the store where it had a little jumper wire somewhere on the terminals to simulate the board being plugged in.

Any one know which 2 terminals get jumpered to make this work? Or perhaps where I can get the information?

oh yeah it's an xt power supply.

thank-you

Bruno
 

A:Power supply without the board

An XT power supply has an on/off Switch attached to it.
AT supplies don't.
 

Read other 1 answers
RELEVANCY SCORE 46.4

i just purchased a new P4-2 with a new fucture motherboard FP-i845P4 and a new powersupply.
when i turn it on the cpu cooling startd to spin then stops. Nothing else from there. if i let it set for 1 minute it will whirl the fan again, then nothing.
is it the power supply or motherboard??
 

A:new board wont power up

Read other 6 answers
RELEVANCY SCORE 46.4

I have a CompUSA notebook with a screen that has gone black.
When I booted it up I heard a "hissing" like noise and the display came up dark but under a bright light I could see the wallpaper and icons. The next boot it came up black.
After having talked to the manufacturer service dept and finding out that they will charge about twice what I paid for a repair, I took the thing apart and found a smoked capacitor on what appears to be a power supply board.
Does anyone know of a source for parts?
thanks in advance
 

A:Laptop Power Board

If you are good with a soldering iron go to radio shack and get replacement components. Call the manufacturer again and ask them to sell you just the part as long as you know what it is. Most of them will be glad to send you one or point you to a depot center where u can buy one.
 

Read other 1 answers
RELEVANCY SCORE 46.4

I have a old 266 slot one board made by epox EP-68LXR and I cannt gress which of the 2 plugs go to were,, one read p8 and the next p9 coming from the power supply it a AT unit and the plug on the board has one slot for them and is not marked making it very hard as they ca be placed at each place one the slot, dont want to burn it up any help thanks
 

A:at- board power connector need help

the black wires on the connectors go next to each other, the large clips on the ps connector clip over the low side of the mobo connector, while the smaller row of tabs go into the slots at the high side.
 

Read other 1 answers
RELEVANCY SCORE 46

I want to install a new monitor but I don't know what video board to get
my motherboard is GA-990XA-UD3 (Socket M2)
please help!!!
I am using windows 10
 

A:New Monitor - What video board?

pleaaaaaaaaaaase
 

Read other 2 answers
RELEVANCY SCORE 46

Attempting to connect a Dell Inspiron 8300 MS XP and a Dell Optima MS XP to one monitor using a IOGEAR Model# GCS612A KVM. Have a Logitech wireless mouse and key board that has a USB connector instead of a PS2 connector. I have used a USB to PS2 adapter to connect Logitech to the KVM. The optima doesn't have PS2 connections only USB. I am using PS2 to USB adapter to connect KVM to Optima. I have use of monitor but not the Mouse and key board.
 

A:KVM:Monitor but no Mouse and key board.

The USB to PS2 adapters are likely the cause of the problem; thy simply don't always work with every mouse/keyboard.
You'll probably want a USB KVM to resolve this.
 

Read other 2 answers
RELEVANCY SCORE 45.6

I have this old  motherboard - model 361682-001 which is from a DC7100 I believe - and I want to fire it up but PSU does not have a six pin motherboard power connector, only a four pin. What can I do about this?  I have to get another PSU?  Or there's an adapter?  Or a jumper on the board?  Or there's a special cable?   Or forget the whole thing?

Read other answers
RELEVANCY SCORE 45.6

Hey guys and gals. I got a real prob. I recently purchased memory for my comp. and whe i went to power up i got nada. The green LED light on the motherboard is on just seems like its not turning on. Checked all my connections over 10 times. I was just wondering if i should clear the cmos and if that would help? Any suggestions would be a big help.My system is as follows.
asus a8n SLI prem. MB
amd ath. 64 3700
maxtor 250 gig sata
antec 500 watt psu
kingston 1 gig pc3200 X 2

Any other info i will gladly give. HELP HELP HELP!!!!!!!!!!!!!!!!!!!!!1
 

A:Mother board wont power up need help.

So you are trying with a total of 2 sticks? You are not running with your old sticks in there as well are you?

Try the ram in different slots and see if you can boot up. Also try with just one stick at a time. You can also try resetting your CMOS, sometimes that will help you to boot up.

If you put your old ram in there, can you boot up?

Let us know how it goes.
 

Read other 16 answers
RELEVANCY SCORE 45.6

hello
i have a asus a8n-sli premium mother board and a antec true power 2 550W power supply however when i look at the motherboard i have a 24 pin EATXPWR and a ATX12V connecter... the power supply only has a 24 pin connecter and not the 4 pin connector as well. acording to the power supply manual i can 'snap off' the 4 end pins to connect to a mother board with a 20 pin and 4 pin connector but what do i do to one with a 24 pin and 4 pin motherboard???
any help would be greatly appreciated

alex
 

A:mother board power connectors??

Read other 9 answers
RELEVANCY SCORE 45.6

I have a SP-A586B board that was working fine yesterday and this morning when I powered it up the Power supply and CD Rom Activate but nothing else happens. There are no Beeps, the monitor does not receive a signal. If I push and hold the reset button the fan over the CPU powers up but nothing else happens. I have removed the Modem, Network, USB boards. Still same results. Any thoughts on where to go next in regards to getting this board working again?
 

A:SP-A586B Board not Recieving power

Read other 6 answers
RELEVANCY SCORE 45.6

DELETED. Somehow I sent it twice
 

Read other answers
RELEVANCY SCORE 45.6

Hello,

Hardware:
I have been using HP Pavillion DV6220TX since 2007.

Problem:
The problem is that I have to move the power adapter pin in various direction applying pressure in different angles until the blue ring lights up

Background:
Since 2007 I have already changed the power connector board twice. I have bought the board off ebay and changed it myself. The problem has re-surfaced once again.

Question:
Does anyone know if I can use any other type of power adapter board? I think the design of the recommended board (431446-001) is flawed and gets damaged very quickly.

Thanks in advance.
 

Read other answers
RELEVANCY SCORE 45.6

I have an Intel D865 Perl Board witha P4 proc.. Needed to replace power supply.
Got an Antec SP 500 watt unit. Noticed the processor power connector has different color wires from the old unit. The connector from the old unit has two yellow and two black. The new unit has one each yellow, orange, red and black wires. Need to know if anyone is familiar with the SP 500 supply why the difference. I don't intend to use it util I'm sure.
This is the first time I've seen this on a power supply.
 

A:Power supply and board compatibility help

Read other 9 answers
RELEVANCY SCORE 45.6

I have an Alienware Sentia M3450 and for a while now I have been having problems getting it to charge. It seems as though there are problems with the power circuit board and/or DC jack because the computer does not know when it is plugged in; the battery icon in the taskbar always shows that it is plugged in and because if that I cannot tell when the plug has wiggled loose and so if I am using the laptop for any prolonged time and the plug does wiggle loose (it does not take much for this to happen) and I don't realize it, I don't receive any low battery warnings or anything; the only way I know the plug has come out in this case is when the computer completely dies and shuts off. Does anyone know why this might be happening? If it helps, the area of the computer where the DC jack is located often becomes extremely hot-- to the point where I can't even touch it.
 

Read other answers
RELEVANCY SCORE 45.6

Hi folks,
Not sure if this is the right place but thought I'd ask...
Somebody put the wrong adapter into my AV700 and it blew. There was no noise, smoke or anything. It was on and working, and when the transformer was turned on it immediately stopped, so I am assuming that the power board has been blown.
Anyone know whether I can buy a replacement from anywhere )and don't suggest Archos, please).

It has the following on it:

AV607PowerV1.3
103493V13
HM6 94V-0

Many thanks!
 

Read other answers
RELEVANCY SCORE 45.6

I have a fairly old monitor (NEC MultiSync 75) that always works with video cards but never works properly when I have it on-board.

The screen resolution is set at 640x480 and the color quality is set at 16 bit, and I cannot change these options. In the device manager, I don't even have a monitor tab, however I do have 2 sub-tabs under Other Devices titled SM Bus Controller and Video Controller (VGA Compatible).

The screen is fine and so is the monitor itself, but I'm thinking that there's an issue with the drivers. When I downloaded the drivers for it, there was no .exe file. Instead, I unzipped an ICC Profile, a Security Catalog, and a Security Information file.

Does anybody know if I can just put these files into the registry somehow and my system will automatically update them and fix my screen resolution?
 

A:Old NEC Monitor On-Board - Screen Res Is Too Small

Read other 12 answers
RELEVANCY SCORE 45.6

Hey doez anybody here know about motherboard monitor?.....
does it work?
are there any problems at all with this program?
thanks
 

A:mother board monitor..good or bad

Read other 15 answers
RELEVANCY SCORE 45.6

Maybe a dumb question for you experts : does a bigger monitor require a more powerful video board ? Specifically a 22" Samsung 226BW LCD and a Nvidia GeForce 8400GS 256MB for Vista - no gaming .
 

A:Video Board vs Monitor Size

No, those will be fine together.
 

Read other 2 answers
RELEVANCY SCORE 45.6

I recently installed a new Acer Model S211HL monitor and a new Nvidia GEForce 6200 video board. I'm running 1024x768 mode with True Color-32bit with large fonts. Everything on my video screen seems wider than normal and the height seems shorter than normal.

What could be the cause of this?

Thanks for any help.
 

A:Monitor/Video Board Problem

Read other 6 answers
RELEVANCY SCORE 45.6

Hi. I have a Sceptre S1902D-RV X9G-Gamer monitor. I am having the problem where, when powering the monitor on, it will turn on for a split second (and look fine) and then turn itself back off. Apparently this is because the inverter board is faulty, and replacing this board should fix the monitor.

I am having a hard time determining exactly which board is used in the X9G-Gamer, and also can't figure out where on earth I would go shopping for a replacement.

It seems like replacing one little board would be cheaper than trashing the whole monitor and buying a new one, and it'd also be kind of fun for me to crack this open and see if I can fix it ... but if it's going to be so much trouble to figure out, or just as expensive either way, I guess I should just get a new monitor.

Looking forward to your comments and suggestions.
Zombra
 

A:Monitor: Replacing an Inverter Board

Read other 7 answers
RELEVANCY SCORE 45.2

here lately my power supply fan has been making a lot of noise. I actually took it out and appart the other day and blew all the dust out of and put it back in my computer. It seemed to work fine and I no longer had to smack it to make it quit whinning. Well about a week later I woke up and the computer wouldnt wake up from sleep mode. I finally had to power down and attempted a reboot, but nothing happened. The computer went to the blue HP screen and then a black screen with a cursor flashing. Thats all I've been able to get ever since. Actually sometimes it doenst even go to the blue HP screen and just straight to the black screen with a curser. I noticed also that the fan on the power supply no longer runs at all. It seems that the power supply is bad. Do you think if i replace the power supply it will fix the problem? Could the power supply malfunction messed up my mother board? The current power supply is a 200w which amazed me. I actualy did attempt to use a old 150w power supply to only run my HD and grapics card for a lower power boot, but I had the same outcome. Someone please help. Thanks.
 

A:Power supply bad? Did it kill the mother board?

Best bet is what you were thinking, get a new powersupply, and make it more than 200 -.-
 

Read other 2 answers
RELEVANCY SCORE 45.2

I have a MSI K7N2 Delta2 motherboard and a Coolermaster power supply #RS-430-PMSR.Should these work together or do I have to change some of the wires?
Please help
Brian
 

A:mother board and power supply compatibility?????

Yes it should work fine
 

Read other 3 answers
RELEVANCY SCORE 45.2

Is it possible to take the power supply that has both ide and Sata cable and hook it up to a mother board that has only ide? And be able to use the sata out of the power supply to hook up a new hard drive?
 

A:power supply with sata to ide only mother board?

As long as the power supply has all the plugs needed for the system and hard drive its going into then yes. There's also adapters and splitters you can buy as well like this: http://www.usb-ware.com/sata-power-adapter-lp4satafm.htm (the reverse is also available)
 

Read other 1 answers
RELEVANCY SCORE 45.2

I have a Dell Inspiron N5010 with an AMD Graphics card and it has the common problem of a broken DC jack. Works sometimes and sometimes it doesnt. Where can I find out the part number for the power board without having to open up the laptop as I dont have to hand? I have checked on ebay for replacements and there seems to be more than one option with part numbers. Also do Dell still sell these spare parts? The other option would be to desolder and solder on a new power port to the board Thanks in advanced
 

Read other answers
RELEVANCY SCORE 45.2

I have Invision Power Board installed on my site, and after a recent update from them, I have a small glitch in my admin control panel. I have posted on their support boards, but they are fairly slow to respond, and not nearly as busy as TSG

Following is a copy of my problem as posted there:

Not sure what in the world happened, but I have lost the drop down boxes (blank white boxes as "place holders" are there, but no drop downs) to re-order forums, and when the page is open (re-order forums in admin CP) I am getting memory errors, as if my computer doesn't have enough memory?? Like if I try to view the source of the page, it tells me I don't have enough memory.....but I can do it ANYWHERE else in the CP! ????

This is the ONLY thing that is malfunctioning, and it's not the computer, cuz it's doing it on any computer I've tried it on, logged in as two different admins. I can do ANYTHING else.....it's totally weird!

I did install the v 1.1.2 just prior to the problem, and another "hack" (just after the v1.1.2 fix) which involved showing only categories and not sub-cats on the index.php page, which is functioning correctly as far as I can tell. Everything else is running great....just this little glitch!!

If any of y'all here have any guesses I would sure appreciate it! I have re-uploaded the files pertaining to "admin", as suggested in the only reply to the above post, to no avail.

Thanks in advance to a... Read more

Read other answers
RELEVANCY SCORE 45.2

The post on the charging cable is broken off and stuck in the receiver connector. This receiver cable runs to the main board and charges the battery. I would like to replace this internal cable. Where can I get replacements parts for my N21 chromebook? https://drive.google.com/file/d/0B_6wlkL7cZhOeUpfZGhjZTJOS3c/view?usp=sharing

Read other answers
RELEVANCY SCORE 45.2

Hi All,
I have a HP Pavilion 7950 desktop PC running WinXP Pro.
After the computer sat unused (and plug into the electrical outlet) for a few months. The PC will not turn on. (It worked fine before it sat) The status lite on the back of the case at the power supply is illuminated green. There is no boot up, no bios, splash screen, nothing.
Here's what I have done;
Tried different electrical wall outlets
Different (but confirmed) power cord
Visual inspection inside the case ie. wiring, swollen capacitors etc.
Swapped out the ram
Unplugged each drive one at a time, then undid all at once
Unplugged fan at processor chip
Held power button for ten seconds or more
Checked cable connections at power button.
Checked cable connections at the mother board
Here's something that did happen. After I discovered the PC wouldn't start, I moved the PC to my basement workshop and it sat unplugged for a few weeks. I started to work on the PC I plugged it in to the power, and it started to boot up, fans were turning etc.. I did not have a monitor plugged in, so I turned off the PC to connect the Monitor and after words, the PC would not power on again. I unplugged the monitor (to make sure it was a video or cable thing and the PC still would not start.
How can I tell the difference if it a Mother Board problem or a Power Supply issue? I don't have a spare power supply close enough in similarities to swap out.
Thanks in advance,
-Dez
 

A:Power supply or Mother board prob?

Read other 11 answers
RELEVANCY SCORE 45.2

I'm looking for what type of power button board cable I have I need a new replacement

Read other answers
RELEVANCY SCORE 45.2

can any body help me plug the power supply back to my mother baord, i unpluged it, and then lost the power supply. the mother bard is of an unknown brand. you plug two 6 pin plugs into it. one plug has orange,red, yeloow,blue, purple, and then black, and says P8. the other has 3 red in a row, a white, and two black and says P9. the board is pretty old it has a pentuim 200.
 

A:power supply connected to mother board

Read other 6 answers
RELEVANCY SCORE 45.2

Hi techies,

My dell inspiron 4000 laptop is not powering up. When I plug in the power supply to the wall outlet the battery lights up but as soon as I plug it into the laptop the light on the battery goes out. The part on the laptop where the battery is plugged in also smells burnt when I plug it back out.

Is this a battery problem or is it as I feared, the power section on the board is fried? Do I have to get a new laptop or can that part of the board be replaced?

Your help would be greatly appreciated.

Thanks

Orville
 

A:Dead Laptop Power Regulator on M/board?

Read other 7 answers
RELEVANCY SCORE 45.2

hi

was wondering if anyone can answer this for me...

i want a graphics card along the lines of ATI X1900. it needs a 400W+ PSU, my system has a 250W PSU.

if i install a 400W PSU will it effect the other components in any way, eg... blow the motherboard? fry the HDD?

searched already for an answer but could find a specify yes or no... cheers guys
 

A:Power supply and mother board compatibility

Most likely no. There are some older Dell systems that had a proprietary power supply where the pins were switched around so that only a Dell PSU could be used.

As far as pure wattage goes, have no fear. 1000w power supplies are just as safe if not safer than that 200w in the current system.

Really, if your planning on investing in such a nice graphics card, you might as well put just a little more into the PSU as well, maybe a 450w or 500w.
 

Read other 3 answers
RELEVANCY SCORE 45.2

The power switch died; as in the tiny switch on the small circuuit board snapped off; one is there a way to short it to start the laptop or how to I go about getting that replaement assembly so my wife can use her laptop again. Regards,Tom Griffin

A:Power Switch Circuit Board 15-u011dx

This is the Part: (11) Power button board (includes cable) 774599-001 Download Manual here "How to" on pp. 45-46 HP gets $72 plus shipping for it: https://parts.hp.com/hpparts/Search_Results.aspx?mscssid=13B7AF6D1FE74FE4937110A8CB2E3903&SearchIn=P... Ouch. About half that on eBay as long as you have not damaged the cable: http://www.ebay.com/itm/Power-button-board-for-HP-X360-774599-001-15-d-15-u011dx-15-u050ca-15-u000-C... Also about $40 on amazon.com: https://www.amazon.com/Power-Button-774599-001-15-u100-15-u200/dp/B01N4PJFXG/ref=sr_1_1?ie=UTF8&qid=... If this is "the Answer" please click "Accept as Solution" to help others find it. 

Read other 1 answers
RELEVANCY SCORE 45.2

So i had my pc tech stick my mini ITX board into a new case and all is working good, but i notes he turned off a setting in the bios he told bios to not halt on errors, i went and turned it on and i see the reason he did is due to the power sensor not being there anymore, as it had a power board in it that distributed power to the system, and i can see on the mini itx board were it would have been. so i called him up and he said it wont hurt anything he set it like that so it would not be annoying to me, that the board is fine and working correct it just had a sensor that is not there anymore. so should i leave the halt on all errors off, or turn it back on and just hit the F1 key to bypass it. does it hurt anything to have it off he says it does not, and mine was a special case as there was nothing we could do about it. as the sensor was on the dead power board and dell wanted way to much money for it so i just gutted the x51 and the machine has been working great, and runs even better.

A:so i gutted my alienware x51 as the power board died had ?

I always use "Halt on all errors" because I want to know in advance of OS loading if something is amiss, but it really has nothing to do with reliability and speed of going thru POST or loading OS and it's further operation. If everything is working right it all comes down to personal preference.

Read other 21 answers
RELEVANCY SCORE 45.2

I have contacted a lenovo service center in my place, they said I should replace the power circuit board, but they don't have any subtitution part. Then, what should I do? Do you have any suggestions please? Thank you

Read other answers
RELEVANCY SCORE 45.2

Hi everyone,  I've had my Yoga 720 for a few months and I have really enjoyed this laptop. I've had a few issues and wanted to reach out to see if it was fixable in setting or something I should reach out to Lenovo directly. Before this, I was using a Mac so this platform is new to me. Any suggestions are appreciated. 1. Power Button: I've noticed that when my screen goes to sleep I've had to push the power button in order for it to 'wake up'. This has not only been slightly irritating but also very slow. I've noticed that it takes a really long time for it to wake up. I was wondering if there was a way for this to be turned off? This way if I open my laptop it goes to the lock screen or if it falls asleep while open I can press a key instead of having to wait for the button to work. I've also noticed it turns the keyboard light on before the screen. not sure if this happens to anyone else too? 2. Key Board: I'm in college so writing papers and forums is an everyday thing for me. Something that has been happening recently is when I'm in the middle of typing, all of a sudden a 'ping' noise sounds and my keyboard stops typing. At first, i thought maybe it was my palm touching the touchpad causing the courser to move to a different area of the screen so I turned the sensitivity down. But this still happens, at times I'm not even touching the pad and the noise sounds and not only am I no longer typing but the course is somewhere different, at ti... Read more

Read other answers