Over 1 million tech questions and answers.

No DHCP server found after using Fixed IP, windows 2000, DHPC server works fine

Q: No DHCP server found after using Fixed IP, windows 2000, DHPC server works fine

IP Network: Dhcp server works fine. (CISCO ROUTER)

Windows 200o servers, Windows 2000 clients (up to dated, sp4, rollup1 etc) IS6sp1

Some pc's with IP dhcp , works ok
Some pc's with fixed IP, works ok

After changing fixed IP on a client to dhcp-IP, the client can not find the DHCP server.
change back to fixed IP, PC works fine again.

DHP server and other DHCP clients still working fine

Local Area connection status: only outgoing packets, no incoming.

reboot, or ipconfig /renew no solutions

Does someone know this problem ?
Pieter

Read other answers
RELEVANCY SCORE 200
Preferred Solution: No DHCP server found after using Fixed IP, windows 2000, DHPC server works fine

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 100.4

The DHCP Server function on my Small Business Server was used to assign IP's to my 4 PC's and 2 MAC's but now the DHCP server (when you go into services and DHCP in administrative tools) is saying it isnt started, but when i right click it and click start, it just stops itself ?

Ive tried re-starting it and things but dont really want to reboot the server as i dont really have the expertise?

Any help appreciated?

Ta
 

A:Windows 2000 DHCP Server

Check your system logs and look for any errors. There should be something about the service stopping.
 

Read other 1 answers
RELEVANCY SCORE 100.4

I am currently running Windows 2000 Professional. I assume to set up a DHCP Server, I'll need Windows 2000 Server. Is this correct?

How does one set up a DHCP Server? Are there any step-by-step resources on the 'net that are plain enough for a novice?
 

A:Windows 2000 - DHCP Server How-to?

Im not sure if the win2kpro has got the ability to serv as dhcp server, but setting it up on the server version is really easy.

Just use the "configure your server" tool that pops up when starting up and youll be done a few steps!

NiteNow
 

Read other 2 answers
RELEVANCY SCORE 95.6

Will someone please explain to me briefly what the difference is between all of these? Why would one want one over the other?

I guess that Windows 2000 is sort of like NT Workstation. If not, please tell me.

And what is the difference between Windows 2000 Server and 2000 Advanced Server?
 

A:{Advice Offered} - Windows 2000 Professional, 2000 Server, 2000 Anvanced Server--the difference?

Greetings

Win2K Professional is, indeed, just NT Workstation 5.0

The real difference between Win2K Server and Win2K Advanced Server is scalability. To quote a CNET article: "Three versions of the operating system will be available next week (it's an old article): Windows 2000 Professional, aimed at PCs and workstations; Windows 2000 Server, for file-and-print servers; and Windows 2000 Advanced Server, supporting clustering, which is a way of making several systems act as a single, more powerful computer.

To quote the FAQ from www.winmag.com:
Windows 2000 Professional is the workstation edition of Windows 2000. This is basically Windows NT Workstation 5.0, although Win2K Professional of course includes all of the new technologies for Win2K.

Windows 2000 Server/Advanced Server is the server edition of Windows 2000, which is designed to serve small- to mid-sized businesses and workgroups. Server supports up to 4GB of physical RAM and up to 4 processors per computer. Advanced Server supports up to 8GB of RAM and 8 processors per computer.

Windows 2000 Datacenter Server is designed for large businesses and computer clusters. Datacenter supports up to 32 processors per computer and up to 64GB of RAM, as well as built-in clustering and load-balancing features.

Is that what you wanted?

Cheers

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Website: www.xperts.co.za/reuel/multiboot

Every morning i... Read more

Read other 1 answers
RELEVANCY SCORE 94.8

Hi there
thank goodness --for the moment you can get the benefits of W8 with a DESKTOP presented after boot (although metro is there too of course) --but it starts in the desktop. The trick is to use W2012 SERVER !!!.

Read the remark on the installation choice if you are goung to try it -.

Note using a server as a desktop OS is a bit fiddly to configure --worthwhile once you've done it --but remember SOME of your programs might not work because you are on a server. Most "Normal" ones will. Acrinis backup won't --it wants the server version --but just use the stand alone bootable version !!

For screenshots I've got them in this thread over at W7 forums --I installed it as a VM on W7 -- didn't want TWO "Preview" os'es running on top of each other. !!

You can download W2012 server --doesn't need any keys --expiry same as W8 Release preview.

Here's the link second post in the thread.

note ist time I tried it failed --hence the title of the thread !!!!! but after a bit of fiddling it's fine and install time around 10 mins on a decent laptop (8GB intel I5 Sony VAIO)..

Windows 2012 server Release Candidate fails install with vmware rel 8 - Windows 7 Forums

Cheers
jimbo

A:REAL Boot to desktop Windows 2012 Server !!! works fine !!

I'll go for it as my desktop OS !

Read other 4 answers
RELEVANCY SCORE 91.6

Hello everyone!

I'm new to this site and I've searched for a topic related to my problem, but couldn't find anything.

I had Norton Internet Security 2005 installed on my computer, but when I added a new hardware item to it, I had to uninstall NIS and re-install it because it wouldn't work. After rebooting, I couldn't establish an intranet connection that did work on the comp before. I managed to find out that there is no default gateway on the LAN, because "no DHCP server was found". To be honest, I don't even know what this exactly means, but anyway. Here's what I tried so far, and didn't work:

1. Restore the default winsock settings, with the netsh winsock reset catalog command and with downloaded winsockfix programs too.

2. Try to renew the IP-address by right-clicking on the LAN settings.

3. Reset TCP/IP stack to installation defaults, with the netsh int ip reset reset.log command.

I've got Windows XP Sp2 and a D-Link DSL-360T modem/router, with ethernet.

I would appreciate any help, but please write it in an "advice for dummies" way, I'm quite a newbie with technical issues. Thanks in advance for your help!

Nirit
 

A:Help! No DHCP server found!

Read other 16 answers
RELEVANCY SCORE 90.4

I have DSL service with four static IP addresses. I would like to run many more devices than four onmy network, so I am looking into a wireless DHPC server/router from linksys. Will this work for me?Paul
 

A:dhpc server with static IP DSL?

If it does NAT it should work fine.
 

Read other 1 answers
RELEVANCY SCORE 90

I just installed a LINKSYS WPSM54G wireless print server and after a few problems have it working. But what is now happening is that my firewall is handling more traffic than usual. (The wall is zone alarm so the blinking red and green icon seems OK for the holdays ).

What I found (via system event viewer) was that every 3 seconds my printer was pausing and then unpausing. The LINKSYS people say that it's suppose to work like that !
Any other ideas?

Thanks
Ted R.
 

Read other answers
RELEVANCY SCORE 88.8

Hello, I'm having a problem connecting to the internet on a desktop computer using an ethernet connection. I get an error that "Ethernet" dosen't have a valid ip config. if i use the ipconfig /release /renew commands i get the error that i failed to contact my dhcp server and my request timed out. all of my other computers and devices can connect to the internet both on wireless and ethernet connections. Any help would be appreciated thanks.
 

Read other answers
RELEVANCY SCORE 88

setup wireless printer server on network. 3 computers can print wireless except for this one toshiba. i disabled norton internet security thinking that may cause it. but still doeesn't work. when i go to add printer from network it picks up the print server but no printer on it...any ideas?
 

A:wireless printer server...works fine on all but 1 computer

Read other 7 answers
RELEVANCY SCORE 88

Hey, i have 2 PC's, and an XBOX360.

The problem lies with the 2 PC's, both running windows XP.

Heres the deal:

I have ADSL, and its wired VIA Ethernet to a hub.

The internet connection goes in through the Hub's "1" port,

it then comes out to port "2", the first PC, which very frequently gets the "Server Not Found" error, and when it gets this error, the internet stops working, even if you restart/unplug the ADSL modem, the net still doesn't work. The only way to "fix" it is to restart the computer, in which case the internet works again, but usually for less than an hour.
The internet signal then comes out of HUB port "3" and into PC number 2, which works flawlessly and never has connection issues.
HUB port "4" then travells to the XBOX 360, to connect to XBOX live which also has no problems connecting to the internet.
Ive tried putting PC 1 on different hub ports to see if thats the issue, but to no avail.
Any help>??
 

A:Server Not Found, but working fine on other PC

Read other 6 answers
RELEVANCY SCORE 86.8

Currently we are on an NT network with a few 2000 servers tossed in. Today I learned that the plan is to migrate everything to Linux. Lets assume that this only applies to the servers and that the users will still operate with 98/nt/2000/xp. What are your thoughts on this?

I put this in this forum for a reason. Because I'd rather get the advice from 2000 and 2003 experts who know what Linux cannot replace than to hear the Linux fanboys and anti-Microsoft activists praise it to the high heavens.

What would your concerns be if this was done on your network? What problems have you encountered if you'd tried this? Or what successes? Know of any businesses that have done this successfully?
 

A:Is Linux ready to replace Windows 2000 server and 2003 server?

Read other 9 answers
RELEVANCY SCORE 86.8

I have 2 servers; windows 2000 & windows 2008, I can always access them via XP but my system 7 home can't authenticate. It appears to add the domain name as a preamble my user name in the authentication....does this make sense?


thank
-Jeff

Read other answers
RELEVANCY SCORE 86.4

Hiya

The Windows Server 2003 Statement of Support (SOS) for Microsoft Internet Security and Acceleration (ISA) Server 2000 lists the steps necessary for ISA Server to function properly on computers running Windows Server 2003. It includes information that an administrator needs to know for setup on both a clean installation of Windows Server 2003 and installations upgraded from the Windows 2000 Server family.

System Requirements
Supported Operating Systems: Windows Server 2003

Microsoft Internet Security and Acceleration Server 2000
Microsoft Internet Security and Acceleration Server 2000 Service Pack 1

http://www.microsoft.com/downloads/...48-8a4b-450e-bd03-1ed3d5e359da&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 86.4

I'm running Remote Server Administration Tools (RSAT) on Windows 7 Professional 64-bit and I've noticed that when I run the DHCP Management tool (DHCPMGMT.MSC) and I add our DHCP Authorised server then close the console, it forgets the DHCP server and I
have to re-select it next time I use the console. 
On the other hand, the DNS console remembers that I've used a particular DNS server even after I close the console.
Wondering why the DHCP Management console is so forgetful?

A:DHCPMGMT.MSC in Remote Server Administration Tools (RSAT) won't remember DHCP server

Hi,
This is by design.

Read other 10 answers
RELEVANCY SCORE 86

I purchased a Netgear Push2TV PTV3000, and updated the firmware, downloaded the latest Intel WiDi, and tried to connect. The search for WiDi adapters found the PTV3000, so I double-clicked to install it. Add a Device ran, but could not find the PTV3000.
Searching the Web I found I needed to insure WiDiApp and Wireless PAN DHCP Server were allowed through the firewall. I found that the WiDiApp was listed in, and allowed through the firewall. I could not find any mention of Wireless PAN DHCP Server in the firewall.
I found the entry in Services, and it was listed as Manual. I set it to Automatic and tried to Start the service. I received an Error 1067: The process terminated unexpectedly.  I am running Windows 8 on a Sony SVS15118FXB.
As a possibly associated issue, since I believe Bluetooth also uses the Wireless PAN DHCP Server, I cannot get Bluetooth to function on the same computer. Attempts to connect Sony Bluetooth speakers also fail.  Maybe the same issue?
Any help would be most appreciated...

A:WiDi can't connect, found Wireless PAN DHCP Server can't start with error 1067

Please post in Windows 8 forums.Arnav Sharma | Facebook |
Twitter Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Read other 3 answers
RELEVANCY SCORE 84.4

Hi,
   I have requirement where i need to open shared file path on button click as file explorer in mvc application.
i am using below code.
IIS version is 8.5 in win 2012 server.Using Windows authentication.
And application pool runs under networkservice
This code works fine in my local but not on server.I am physically able to open folders from server though.It does not log any error but folder explorer does not open from server.
public ActionResult EvidenceFolder(string PageFrom, string Assetid, string id)
        {
            OpenFolder(@"\\backup\MIS\OL Property Services\PS5 Property & Portfolio Management\Compliance\FIRE RISK ASSESSMENT\Evidence Folders\" + Assetid);
          
            if (PageFrom == "ReviewActions")
            {
                return RedirectToAction(PageFrom, "Landing", new { id = id });
            }
            else
            {
                return RedirectToAction(PageFrom, "Landing", new { ActionID = id });
            }
        }

private void OpenFolder(string folderPath)
      &nb... Read more

Read other answers
RELEVANCY SCORE 84

is there a way i can get a list with all the users login time, log off time, and all the info?
 

A:windows 2000 server/exchange server

Read other 8 answers
RELEVANCY SCORE 83.2

I'm messing around with W2K Server at home and can't seem to get it connected through my cable modem to my ISP's DHCP server. I know the cable and connection are good because it works on my W2K Pro workstation. I've tried ipconfig /renew but that's when the error occurs that it can't find DHCP. I can successfully ping the loopback address. The NIC is set to use DHCP.

Since I'm just becoming familiar with Server I'm sure there's something I'm not configuring properly. Suggestions?

Thanks.
Kevin
 

A:W2K Server can't find external to DHCP server

Read other 6 answers
RELEVANCY SCORE 83.2

Hello,

I have a problem to access file server on Windows Server 2000 from a Windows 7 PC. For your information, due to some reasons, both Windows 7 and Windows Server 2000 are in different domain.

I have tried all suggested solutions which are :
i. to unchecked both attributes in 'Network Security : Minimum session security for NTLM SSP based (including secure RPC)' for both clients and server.
ii. to apply 'Send LM & NTLM - use NTLMv2 session security if negotiated' in 'Network Security : LAN Manager authentication level'
iii. to make sure the time setting for both Windows 7 and Windows Server 2000 are the same.

But still, i couldn't access the file server. In fact, each time I entered domain\username to authenticate, it will give out this message :



Since I am kinda new to this troubleshooting things, it would be great if someone can tell me why does this happening. Is it because of the different domain?

thanks in advance.

A:Windows 7 unable to Access file server on Windows Server 2000

To connect to the server you would need to enter the credentials of the domain user on the server that would have access. For example if the domain was 'home' with a user 'Josh' then I would put:

home\Josh

As the username. If you want to get advanced you could try and form a trust with the other domain in active directory so that the other domain has permission to access the server

Josh

Read other 4 answers
RELEVANCY SCORE 81.6

Working on Win7 Pro x64 for years with same network settings - gigabit wired IPv4, fixed IP, fixed DNS, etc. Lot of other comps, network printers, APs - everything works fine. Suddenly last week my machine (only one) refused to connect - sometimes with yellow exclamation triangle on network icon, sometimes w/o it. But even if it tells "connected to internet" it does not connect to anything, even gateway. Few times it was resolved by reconnecting network cable. Trying various solutions without success. Then I noticed, that changing IP settings to DHCP solves problem - connection is back. Reverting to old fixed IP "disables" connection. I didn't install any new hardware or soft, only periodical software updates. Restoring system from "working" image made nothing. Have no idea - what's going on? Any way to fix or check what is a cause?

A:Can't connect with fixed IP, only DHCP works

As strange as it may sound, some Access Points (AP/router combo) will not allow devices with static IP addresses to connect* if the IP address of the device is outside of the DHCP range. They claim it is a security feature. The AP/router can tie the IP address to a MAC address - thus making it like a static IP assignment - but within the DHCP range. That IP won't be assigned to any other device.

*connect can mean different things. The computer is in the router's list of connected devices, but the computer is not allowed to connect to the internet or any local network assets.
I mention the above info so that I can ask if the firmware in the network device handling DHCP might have automatically updated and started enforcing that type of "security". Or, perhaps the DHCP range got changed and this one computer is now outside of the DHCP range.

Also, what happens if you assign the problematic computer a different static IP address?

Read other 4 answers
RELEVANCY SCORE 81.2

Hi, Can any1 help me i have did upgrade Windows 2000 Ent. Server (SP4) to Windows 2003 Ent. Server, but after rebooting the machine all of sudden BLUE screen appears with mentioning below error though OS working in safe mode. Please help me out to resolve the issue ASAP.
Driver_IRQL_NOT LESS OR EQUAL

Then at the end it says
Beginning dump of physical memory

HYDIS.sys address 7505AF5 base at F74E9000
Stop: 0x000000D1 (0xf3bbf000, 0x00000002, 0x00000001, 0xF7505AF5)

Physical memory dumb.
Contact your system administrator or technical support group
BR,

Sharjeel
 

Read other answers
RELEVANCY SCORE 80.4

I was trying to use tftp32d to pxe boot machines however, I couldn't get the DHCP server that is built into that program to work and eventually got angry and gave up. When I had some more patience, I started trying it again and it worked immediately without any settings changed.

The reason for my post is because it stopped working again. I can't figure it out and it's driving me nuts. Could this be an issue with the setting where you can select which network your own for example work, home or public location?

Read other answers
RELEVANCY SCORE 80

I got a little problem getting the static ip configuration to work on one of the W7 machine, DHCP works but i need to be static. Here is the layout of my network:

1. Modem conected to:

2. 4 port wireless router conected to:

3. 8 port SMC giga switch conected to:
3a. Win7 computer - static ip
3b. WinXP computer - static ip
3c. Network printer - static ip
3d. Network camera - static ip
3e. 5 port SMC giga switch

3e. The 5 port SMC giga switch conected to:
3ei: WinXP computer - static ip
3eii. Win7 computer - with two lan cards
Lan card 1: its a 10/100 card that works both in DHCP and static form. (its disabled right now)
Lan card 2: ITs a 10/100/1000 card that only seems to work in DHCP form. Once i set it up as static, the computer wont see the network (without connection).

Notes:
1. Both Win7 boxes are configured the same way except the ip number of course.
2. The ip range on the network is in the 192.168.1.xxx
3. Gateway and Primary DNS: 192.168.1.1
4. Subnet: 255.255.255.0
5. I have disabled IPv6 (read in forums that might help) still doesnt work.

I have ran out of ideas.. :s

A:W7: DHCP works fine, but NO Static IP

Welcome Kamaelon,

Have you tried "reserving" a static IP address from the DCHP pool? If you dont know how to do this, post back with your router model and I will make a rough guide for you

Read other 5 answers
RELEVANCY SCORE 80

I got a little problem getting the static ip configuration to work on one of the Windows 7 machine, DHCP works but i need to be static. Here is the layout of my network:

1. Modem conected to:

2. 4 port wireless router conected to:

3. 8 port SMC giga switch conected to:
3a. Windows 7 computer - static ip
3b. WinXP computer - static ip
3c. Network printer - static ip
3d. Network camera - static ip
3e. 5 port SMC giga switch

3e. The 5 port SMC giga switch conected to:
3ei: WinXP computer - static ip
3eii. Windows 7 computer - with two lan cards
Lan card 1: its a 10/100 card that works both in DHCP and static form. (its disabled right now)
Lan card 2: ITs a 10/100/1000 card that only seems to work in DHCP form. Once i set it up as static, the computer wont see the network (without connection).

Notes:
1. Both Windows 7 boxes are configured the same way except the ip number of course.
2. The ip range on the network is in the 192.168.1.xxx
3. Gateway and Primary DNS: 192.168.1.1
4. Subnet: 255.255.255.0
5. I have disabled IPv6 (read in forums that might help) still doesnt work.

I have ran out of ideas.. :s

A:W7: DHCP works fine, but NO Static IP

I assume you tried various static ip addresses within that subnet and are keeping track of which ones you are using. Have you tried connecting the pc directly to your router?

Also, consider disabling dhcp on your router.

Does your adapter ip settings look similar to this?



Out of curiosity, what is the make of the LAN card and what drivers are you using? Windows or OEM?

Read other 4 answers
RELEVANCY SCORE 79.2

Good Morning,

I get random popups. I have run all available anti-spyware software and anti-virus software and it has not fixed this issue. Also after a clean reboot i only have about 5 min or so browse the web before i get a "cannot find server" screen. I can access the web with other programs ( worlds of warcraft is one).

I ran your Vundo utility per the directions i have seen on many of these posts and it did find and clean it up. I am still having some issues. IE still locks me out. here is my log.

Logfile of HijackThis v1.99.1
Scan saved at 12:29:32 AM, on 3/23/2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\csrss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Windows Defender\MsMpEng.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\CTsvcCDA.EXE
C:\Program Files\Cisco Systems\VPN Client\cvpnd.exe
C:\WINDOWS\csifcsvc.exe
C:\WINDOWS\LogWatNT.exe
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\Program Files\Eset\nod32krn.exe
d:\Photodex\ProShowGold\ScsiAccess.exe
C:\Program Files\Spyware Doctor\svcntaux.exe
C:\Program Files\Spyware Doctor\swdsvc.exe
D:\Alcohol... Read more

A:IE shows "cannot find server" Vundo found and fixed! still not working. help!

Bump!

Read other 19 answers
RELEVANCY SCORE 79.2

Hi;
I am having the KMS Server with Server 2012 KMS Key,which is hosted on Windows server 2012 R2.

We need to update the KMS Server 2K12 Key to 2K16 KMS Key, Is there any way to Get the detail that the key will activate these OS Versions?

MBAM Report Feature Error Alert

Read other answers
RELEVANCY SCORE 79.2

Hi,

My laptop is SAMSUNG RC510 model. It has Windows 7 64 bit. To connect to internet i have to plugin the LAN Cable to my system and it has to automatically get one IP from DHCP server. Then i have to open a website and login to connect to internet.

But when i plug in the cable, it does a try to connect to the DHCP server to get one IP. But does a timeout and set one default IP with 169.x.x.x.

Same when i inserted to a different laptop it had no issues.

Things i have tried are:
* Doing a release and trying to renew the IP from command prompt
* Disabling kaspersky Antivirus.
* Uninstalling the antivirus.
* Disabling all rules from Windows Firewall
* Uninstalled Virtual Box software to make sure other network stuff not creating problem
* Uninstalled and installed the driver several times
* Disabled and enabled the connecting several times
* Plugged out and in the cable several times
* DHCP and DNS client are running and set to automatic

But still it cannot make my laptop's LAN to get one IP from the DHCP server of the connection.

I cannot set a static IP as it has to work in DHCP.

Please help me out.
 

A:Unable to get IP from dhcp server from windows 7 through LAN

Maybe only the one computer is allowed to connect and you have to call the provider to "reset" the connection or to register another computer to allow it to connect.
 

Read other 1 answers
RELEVANCY SCORE 79.2

Hi, I've got a DHCP service issue on Windows Server 2003, sometimes computers can not acquire an ip address and netbios is not working, this happens when DHCP service is down but a I dont known why the service get down, I have to reboot the server to fix temporaly this issue each time it comes.

Some suggestion to fix this definitely??

Thanks
 

A:DHCP Windows Server 2003

Read other 6 answers
RELEVANCY SCORE 79.2

Can Windows 98 be set up as a DHCP Server?

If so, how is it done?
 

A:Setting up Windows 98 as a DHCP Server?

Nope....Win98 has no such capability
 

Read other 2 answers
RELEVANCY SCORE 79.2

On Windows Server 2012 R2 DHCP

I have a network in 128.19.4.1 -- 128.19.4.254 but now all IP address has been assigned to all system but i have 400 system i.e i want to increase IP address range so that all 400 systems can get IP address and internet and all should be able to communicate each other

How to resolve this issue? Please let me know if required more information.

Thanks.
 

A:On Windows Server 2012 R2 DHCP

Is this in a work place network?
 

Read other 3 answers
RELEVANCY SCORE 79.2

Hello, I'm using Windows server 2003 and am having trouble with the DHCP server. I need to turn on option 61 (Client unique identifier) to get some hardware to work, but it doesn't come up. is there some way to do this??

Thanks
 

Read other answers
RELEVANCY SCORE 79.2

Hi, I hope the title didn't confuse you...
I'm totally new to using Windows Server 2003 (or any windows server edition) but I do have a basic understand of networking.

Ok, so here's what's going on... I have a machine with Windows Server 2003 running an Exchange Server in a office with 5 workstations attached. The server is being used for a basic outlook calendar across the various workstations, nothing major. Our current ISP provides us with a Static IP address. The party that installed and configured the server set it up to run the DHCP server on the server PC itself. As in, the machine running windows server is also running a software DHCP server for the entire network.

THE SETUP: As of right now we have a wall port (internet access) with a cable running to a 8 port unmanaged netgear switch that has cables hooked up to the 5 workstations as well as the server itself. Pretty simple.

THE QUESTION: How do I configure the ISP static settings on the DHCP Server portion of the Server PC? We may be getting a new ISP with a dynamic address OR a new static address.

WHAT I'VE TRIED: I've tried configuring the IP address on the Server PC the way I would via the NIC adapter settings but it already has a internal IP address from the DHCP Server running on that PC so changing that was no good. I guess what I'm basically looking for is a screen like this (I hope you're familiar with the configuration pages of Linksys Routers)
http://ww2.jus... Read more

A:Static IP from ISP on Windows Server w/DHCP

Read other 16 answers
RELEVANCY SCORE 78.8

Hi all, first time posting here and hoping someone can help me out!

As the title implies, I am having trouble connecting to the internet, but not my network, when I assign a static IP to my machine. However, when it's set to DHCP, it works just fine.

Pertinent info:
-I'm connecting to a Linksys WRT610N router via a wireless USB adaptor, Netgear WNDA3100v2;
-Service is Time Warner Roadrunner cable;
-There is no IP conflict as I've got DHCP range set from .200-.249 and this machine's static is .100;
-All the other devices in the house are on static starting with .101 up and they all work fine, both wired and wirelessly;
-Can see and connect to all devices in the LAN, including the router, but nothing outside

Any suggestions would be greatly appreciated... thanks!
 

A:Can't connect via static IP but works fine via DHCP...

Read other 7 answers
RELEVANCY SCORE 78.8

I'm running a simple network at home with a Linksys BEFSR41 router. I have two computers hooked up wired and a wireless router acting like an access point that I use for my laptop occasionally. Until this weekend I've been having no problems but I shut down the computers due to weather and now one of them is not able to communicate with any others on the network. The problem computer will get an address supplied to it by the router (DHCP server) but once it has it I cannot get any other connectivity. Of course this is hindering internet access on this computer. I can ping the loopback and assigned IP addresses w/o problems but when I ping the default gateway (router) and/or the other computer I get "Request timed out." I initially thought it was the NIC so I bought another one but still get the same issue. I've moved the cards to different PCI slots but no luck. I tested the cable running from the computer and the router but found no problems. I even tried resetting the TCP/IP stack but still didn't work. The computer in question is running WinXP SP2 with the original NIC being a Linksys LNE100TX and the new one being a D-Link DFE-530TX+.

Any clues on this? If more info is needed let me know--it's been a while since I've posted. Thanks in advance.
 

A:Solved: Getting IP addr from DHCP but cannot ping DHCP server

Read other 11 answers
RELEVANCY SCORE 78.8

I need the IP address ,DNS and gateway address so on .Is it possibile to get it from the modems DHCP or do I need the ISP DHCP working?

I'm setting up are home network and getting connected to the internet but the internet connection is down .But is it possibile that I can get this from the modem. .

Like how does the computer talk to the modem and the modem talk to the DHCP server .I never had this problem before.
 

A:Can you get DHCP info from the modem software even when the DHCP server is down

Read other 8 answers
RELEVANCY SCORE 78.8

Hello All,

I want to dual boot XP Pro , 2000 Server and 2003 Server and wanted to check the best order to instal these OS's?

Can anyone help?
 

Read other answers
RELEVANCY SCORE 78.8

Hi there, I have installed some old windows 95 software (swedish software) and it works But not at Vista or 7 system. W 8 seems to me is an success, W 8 Pro makes my day! /Norparn MC & H 2013

Read other answers
RELEVANCY SCORE 78.4

Hi,

The procedure is as follows:
---------------------------------
Right-click databases -> Restore Database
I mark 'from device', click the '...' button & select 'File' in the dropdown, then brows to the file itself. Under 'select the backup sets to restore' I check the only checkbox there, then in the 'To Database' I select the name of the database in the file (a new DB name appears there as you select the file).

Then I press OK and receive the error message in the attached file.
I need to be able to complete the import.

Thanks,
Daniel.
 

A:Problem importing SQL Server 2000 *.bak files into SQL server 2005

Is this at all possible?
Is this the right forum?
 

Read other 3 answers
RELEVANCY SCORE 78.4

I have a Access 2000 database residing on one sever and an installation of SQL Server 2008 residing on another. Both servers are running Windows Server 2003. I created a linked server using the code below. When I run EXEC sp_tables_ex 'PropCont' I get the following,
"OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: The provider did not give any information about the error.].
Msg 7399, Level 16, State 1, Procedure sp_tables_ex, Line 13
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. The provider did not give any information about the error."

I tried changing the code to specify my account information, which has Administrative privileges on the domain and I get,
"OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80040e4d: Authentication failed.].
Msg 7399, Level 16, State 1, Procedure sp_tables_ex, Line 13
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. Authentication failed."

Originally I was getting an error that said, "The workgroup information file is missing or opened exclusively by another user" I found an article on line that suggested I do the following,
"1. Open SSMS
2. Expand Server Objects, Linked Servers, Providers
3. Double click the provider (Microsoft.Jet.OLEDB.4.0)
4. UNTICK the "Allow inprocess" option"
I did this and I stopped ... Read more

A:Linked Server from SQL Server 2008 to Access 2000 db gives error

Read other 7 answers
RELEVANCY SCORE 78.4

Hiya
This is a spoofing vulnerability that exists in the affected products and that could enable an attacker to spoof trusted Internet content. Users could believe they are accessing trusted Internet content when in reality they are accessing malicious Internet content, for example a malicious Web site. However, an attacker would first have to persuade a user to visit the attacker’s site to attempt to exploit this vulnerability.
Affected Software:

• Microsoft Proxy Server 2.0 Service Pack 1
• Microsoft Internet Security and Acceleration Server 2000 Service Pack 1 and Microsoft Internet Security and Acceleration Server 2000 Service Pack 2

Note The following software programs include Microsoft Internet Security and Acceleration Server 2000 (ISA Server 2000). Customers using these software programs should install the provided ISA Server 2000 security update.

• Microsoft Small Business Server 2000

• Microsoft Small Business Server 2003 Premium Edition

http://www.microsoft.com/technet/security/bulletin/ms04-039.mspx

eddie
 

Read other answers
RELEVANCY SCORE 78.4

Hiya

This document describes the monitoring scenarios that are supported by the Microsoft® SQL Server™ Management Pack Refresh and includes detailed instructions for configuring and tuning the Management Pack. This guide also includes reference information that lists the contents of the Management Pack, including reports, computer groups, scripts, default public views, and processing rule groups.
System Requirements
Supported Operating Systems: Windows 2000, Windows Server 2003, Windows XP

Run Microsoft Word to view the document.
http://www.microsoft.com/downloads/...b3-622a-4e2e-872e-08244565f254&DisplayLang=en

Regards

eddie
 

Read other answers
RELEVANCY SCORE 78.4

Hiya

This self-extracting executable, BOLNotes.exe, contains a document with updates to SQL Server Books Online for SQL Server 2000. These updates include corrections, clarifications, and new topics

http://www.microsoft.com/Downloads/release.asp?ReleaseID=31343

Also

MSXML 4.0 Parser and SDK

The Microsoft® XML Parser 4.0 Technology Preview has a number of improvements compared to the April release: XSD validation with SAX and DOM, schemaLocation attribute; Schema Object Model (SOM); faster XSLT engine; new faster SAX parser; true side-by-side functionality. Old non-conformant technologies are removed: old XSL with XSLPattern; uuid namespaces for XDR; proprietary XmlParser object; normalize-line-breaks property in SAX. There is no more support for replace mode and version-independent ProgIDs

http://www.microsoft.com/Downloads/release.asp?ReleaseID=31333

Regards

eddie
 

Read other answers
RELEVANCY SCORE 78.4

Hi all, sorry if this is in the wrong section but it was the closest one I can find.

I am setting up a Windows Server 2008 R2 server onto a network. The network has an ADSL modem router. I think I am setting up something incorrectly as I cannot get internet on my computers when the DHCP is enabled on the computer and not on the router.

My settings are as follows.

Server PC: (I set these myself manually)

IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1

DNS Server: 192.168.2.1


Router:

IP Address: 192.168.2.2
DHCP Server: Disabled
WAN DNS Address: *retrieve automatically from service provider*

DHCP settings in server manager:

IP Range: 192.168.2.10 --> 192.168.2.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
DNS Server: 192.168.2.1

I have not modified any DNS settings not entered any settings apart from the above.

I cannot for the life of me get the internet to work with these settings and I need to run a domain environment from this server so I need the DHCP and DNS to operate from the server.

If anyone is able to help me I will be eternally greatful.

Thanks
Mick

A:[SOLVED] DHCP and DNS in Windows Server 2008

Looks like your Server's setup in a loop, pointing back at itself for DNS (and Default Gateway?); you need it to pickup from an outside DNS server - your ISP, OpenDNS or whatever.

Not sure what the gateway needs to be set for, I'd suspect it should point to the router's IP - but I know almost zero about setting up a server!

Read other 3 answers
RELEVANCY SCORE 78

So, I'm working in this domain environment and 99% of everything is peachy-keen. But every now and then someone will complain that they have no internet access. This maybe happens to one user in 40 maybe once a month - tops. So it's not critical.
Just very weird.

Most workstations are Windows 7 since the client hasn't been keen to use Win 8 with Autocad. Windows Server 2008 R2 running DNS, DHCP and VPN server. No rogue DHCP servers. We checked.

When checking out the workstation I note that the user can get to the server for files. They can ping the DNS server and gateway by name or IP and get a correct response, but when you try to ping google.com, no response.

My usual fix is just set them static above the DHCP scope. Forget it for a week. Come back and reset them to DHCP and everything will be fine.

Has anyone run in to anything like this? Any suggestions on what might need checking?

Read other answers
RELEVANCY SCORE 78

Created RAID1 and RAID5 on my Physical server
Created a
Bootbale  USB to install  ISO Window 2012 r2 on supermicro x9drl-if Server.

But it is returning with an error:




fouad.lahoud

Read other answers