Any body out there have experience replacing a laptop screen? Don't have any problem replacing the screen but I'm not sure if it's worth doing. The laptop was given to me with the screen broken. When I plug the power cord in and turn on the unit, nothing happens; no beeps, no lights, not even a sigh. I'd hate to buy a used screen, only to find that the rest of the unit is fryed due to the obvious fall that it took. Any suggestions?
I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.
I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.
You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)
Well, I sure wouldn't do anything about buying a screen until you're sure that's the only issue. If it doesn't do anything, I'm guessing that more than the screen is gone. Since a most likely better new laptop can be had for as little as $400, do you really want to sink money into this one? Start your shopping here:
More Stuff 4 Less
We have a two year old Toshiba laptop, my son tried to clean the screen and cracked it. I have about 2 inches that I can see.
I want to connect it to an external monitor, when I hook it up, I can only see on the external screen until it boots up and then it clicks over to the lap top.
how can I fix this?
Read other 9 answers
Is there any way to replace a broken Toshiba Satellite Laptop LCD screen? My son accidentally broke it by closing the laptop on top of it's mouse is what I'm assuming. There is nothing otherwise wrong except for the screen and I can't stand having to hook a monitor up to it so I can work on it. Also is it hard to replace the screen or is this something that a computer repair shop needs to do? Thank you in advance.
Yes, it is very much possible to replace the screen. Usually they run between $150-250, depending on where you find it. And most screens are relatively easy to install as long as you have a small screwdriver and some patience. Someone can easily guide you through it if you have any trouble, but a computer store will charge you a MINIMUM of $60 for labor, if not more, plus handling fees for the screen itself. I'd recommend buying a new screen online and then coming back here and I can guide you through it.
Also, which model Toshiba do you have exactly? I am familiar with most, but just to make sure.
Hope this helps.
I acquired a free used laptop last night, and I was under the impression that it still worked for the most part, but was really shoddy. I don't know the model, but it's a Toshiba that I know is a few years old (therefore no longer under warranty), and runs on Windows XP.
I tried turning it on, and it started running, fans and all. However, the monitor was not working. I waited a bit and fiddled more with the power button a few times (I also pressed a few keys and fiddled with the mouse). Once during this, the Toshiba screen came on for a few seconds, and then went back off. When I saw this, for some reason I got the idea that just maybe if I put the OS disc in and turned it on again, the monitor will magically work and it will let me reformat. Needless to say, this did not work. I then plugged into it my desktop computer's monitor, to no avail.
I know absolutely nothing about hardware, so I'm at a total loss. Any ideas for things that I can try that may fix the problem, before I think it might be an idea to send it somewhere to be fixed? Thanks in advance.
Do you hear the laptop power up and continue to run even when you cannot see the screen? If so, then try pressing CTRL + ALT + DELETE after you press the power on button, this is simply to check that the power supply it improperly sending the POWER_GOOD signal or the motherboard is not receiving it.
So I managed to drop my laptop Satellite C870 - 15K to the floor. It cracked my screen (see attached) so I'm thinking of replacing the screen myself. However before I purchase the screen I wanted to make sure the laptop is still working.
When I try to connect it to my TV through HDMI to verify if the laptop is still function I get no image. I thought maybe it's in standby mode or something so I removed the battery and tried again without luck. When I start up the laptop it sounds normal but I don't hear any windows sound or anything. Any advice on how to continue?
Pull off the bottom access panel(s) and make sure the memory and hard drive are seated properly by removing them and re-installing them. It is also possible that the broken screen is shorting out the motherboards video. Try connecting the TV after you remove the LCD panel. One more thought... you have pressed the proper F key to activate the external video port?
My problem is I have a Toshiba Satellite laptop that will not start, every time I press the start button I can here a clicking noise coming from the hard drive as if its trying to spin but something is stopping it.
Does this mean it is broken and I have to replace the drive or is there something else I can do?
Thanks for any help
Read other 6 answers
Toshiba Satellite A305-S6858
1. If there are no cracks on the actual screen that you can reach up and touch, but you see the crack behind the glass, is that the screen broken or backlight broken.
2. Would I look for a replacement screen or a replacement backlight?
3. Since I'm going to replace the screen, backlight whatever, is it possible to make it a touch screen?
Thank you so much for your help.
1. Its a broken screen, your computer had protective glass in front of the LCD screen it self.
2. well we answered this already.
3. I don't know about this one, I would have to say no, but if it was possible your local PC shop will not be able to do it, and I would assume it would cost a lot of money.
I wasn't very clever of placing continiously my laptop on the floor, which lead to me stepping on it the other day and now I have a broken screen. It still works, but there are colored cracks..
I contacted Toshiba to check about the cost of such a repair and I was told that the price of the screen only will be more than 300? + the work and all will make it about 400?.
I also contacted a local computer shop and they said that a non genuine Toshiba screen will cost 160? + work.
My question here is: Can I by myself the screen on the internet and does it take any special skills to mount it on the laptop? I have just a bit more than basic skills in repairing elecronics and I suppose I will be able to change it, if it doesn't take any special skills or tools..
And as well, what screen should I buy? A genuine Toshiba one or a less expensive one also does its job?
The brand and the model of the laptop are: Toshiba Satellite P300 - 1G6 - 17"
Thanks in advance for all eventual responses!
Read other 16 answers
Is this at all possible? Pretty new at the whole DIY breaking computers open to fix them stuff but i'm learning quick haha.
Here is the toshiba and the screen:
Toshiba Satellite C55Dt-A5231 Laptop
Laptop LCD Screen for Toshiba Satellite C55DT A5231 15 6" WXGA HD | eBay
Here is the replacement screen for the Sony laptop(actually an LG screen):
What would I need to know in order to understand if this would work or not?
Also, here is the laptop w me holding up the screens:
It's not the size of the display screen, these are all fairly identical. It is the connector socket and the rail screw positions that will bite you.
I suggest finding an exact replacement. If you can't find one on eBay then you certainly will at a store like this one:
LAPTOP SCREEN from $34.99, replacement LCD screens. Repair Tablet, Acer, Apple, iPhone, iPad, Samsung, Dell, HP Compaq, Toshiba, IBM Lenovo, Sony, Asus, Gateway.
A disclaimer before I proceed. Im not the best with computers or computer terms.
I have a Samsung laptop (not sure of the model), and the screen broke months ago. Since then I've been using an external monitor without any issues until today. When I start up my laptop I can never see anything displayed on the external monitor until the log in screen. The monitor will always go into hibernation mode until the log in screen.
However, today it's taking longer to start up and I cant see what's going on. At first I thought windows was performing a disk scan but i waited over an hour! So that must not be the issue. I want to find a way to display what is happening on the external monitor if possible. I have been endlessly searching all day online for help. I would really appreciate any help/advice.
My Laptop,s (HP dv4-t 1600) running on Windows 7 64bit screen is broken. Doesn't display anything. I connected secondary display/screen, but it doesnt display anything. Doesn't auto detect. What do I do? Please suggest.
Try pressing fn + f4Read other 2 answers
I used a Samsung NP300E5A-A02UB laptop for over a year through an external monitor, ever since the screen broke on it. Never had any problems with it besides that. Until one day I, not thinking about it, shut down my PC through holding down the power button, because it was being too slow, couldn't even shut it down normally. But little did I know, doing that would make sure I can't use it again, as far as I can tell. Because I shut it down using the power button, I'm assuming the screen came up, the one either to repair or tell me the pc shut down incorrectly, or bios, or whatever it is. But since my external monitor doesn't turn on until after my pc is signing in, it won't turn on. Normally it would just kick on automatically when signing in. So I'm completely blind to what I'm doing and can't get my monitor on. Literally all I need is a sneak peak at it to get it to turn on all the way, but I don't know how. I've tried a few things already, that I've found online, but never though to ask about it til now.
I've tried doing the little closing and then quickly opening up the laptop screen to fool the pc into turning it on.
I've tried manually unplugging my screen, in hopes it would use my external as a primary instead.
I've pressed the appropriate F key, or combination keys to turn it on.
Possibly other things, but I forget, it's been a little while.
All of these with no luck.
Literally all I may... Read more
Read other 12 answers
Hi Guys, hoping one of you can help with this.
My girlfriends had a laptop for a couple of years and the screen backed up a while back which then lead to a seperate monitor but now it's given up completely.
I'm trying to figure out a way i can access her laptop through my PC but taking into account i can't view/action anything from the laptop.
My girlfriends had a laptop for a couple of years ...Click to expand...
You have two or more girlfriends and they shared a laptop and the only thing broken is the screen? Amazing!
If it was setup to allow Window's Remote Desktop or some similar third party remote access, you can use that. Otherwise, I think repairs or another laptop are called for.
Hi, I'm having trouble with the screen on my Toshiba Satellite L775-S7352 when it reaches the Welcome screen on Windows 7 Home Premium 64 bit. This happens while reaching the Windows Welcome screen & sometimes it will reach the desktop before going fuzzy. It boots fine into Safe Mode.
I've already checked the HDD and the Memory - they are fine... I've done a fresh install of Windows 7 Home Premium 64 bit from the manufacturer's recovery disks - the screen and everything else worked fine even through the first round of Windows Update (193 files) the machine rebooted after the updates and I checked for more updates. As soon as the installation of the second round of updates began the screen went buggy.
So I formatted the HDD and tried another reinstall - I successfully reinstalled the system and this time the screen went buggy trying to search for the first update for this reinstall...
Is this an issue with the screen or the GPU? any ideas?
Hi first hook it up to an external monitor. does the external have the same problem?Read other 9 answers
I have a Acer Aspire. The screen has been cracked and I'm running it in safe mode through an old computer monitor. I have been told by someone that I can disable the laptops screen and boot up normal after that. Any help on this?
hi they may mean the fn key=F6and F5
I have an old Dell Inspirion laptop with a broken screen. I have irreplaceable files on it that I want to save. When I hook it to a monitor the monitor doesn't detect it and goes into sleep mode. It's too old to connect it to my tv via hdmi cord, and I don't have an s-video cord. Is there an app that I can use with my android tablet as a proxy via usb cord? If not, is there anything else I can do?
sounds like the video card is broken, as the monitor does not work
You wil l need someone to take the harddrive out and use it in a USB Caddy or connect to another PC to get the data off
I have a nice laptop with a broken LCD screen. I would like to continue using it as a desktop connected to a regular monitor, but I cannot figure out how to configure it to use the monitor as the primary display because it boots to the now missing LCD. I could configure it were the LCD working, but it isn't. Can anyone suggest a workaround? It is running Windows XP SP3 and I can see the "Windows XP" boot screen for a few moments at startup
Thanks in advance for any suggestions.
Most laptops have a set of keys to press to enable the external monitor output. Usually it's FN at the bottom of the keyboard and one of the top F# keys - look at the pics on the keys for the right key or check the manual.
Okay so i went to pick up my laptop and i grabbed it by the screen and my screen messed up. It looks like i have a air bubble under the screen. while my laptop is on about 90% of my sreen has a white spot with color lines running threw it.When it is shut off the mark looks like a deep black spot. The laptop is a compaq presario v5000. please if you know any way i might be able to fix it let me. thank you.
i have been given an old AST win 98 laptop, the thing is the screen is very dodgy, sometimes you can see what is happening, sometimes you can only see the top part, it is just very fuzzy and malfunctioning.
is there any way to replace the screen, and how much would it cost???
thanks in advance...
This site claims to specialize in AST monitors, and they do sell them. SO if you van find your laptop madel you can replace the screen.
Hello, I've had my laptop for about 3 months now and a crack has appeared on the top left corner of my screen. I didn't drop it and kept it in good condition to find one day with a big crack. The screen has even gone completely whiteand i have to restart just to use. This is my go to for homework so I'm very concerned. Reading this thread seems to indicate a harware error. Can someone help me please I love the computer but this is a problem. I really care about this computer and i csnt use it with the screen like this. Is there any way i can replace the screen. Help me.
Well it is probably the single most common laptop screen being made. It is a 1366 x 768 15.6 inch LED Brightview panel HP Part number 689690-001 Video instructions: https://www.youtube.com/watch?v=WKeisMQHmZo You just need a small Phillips screwdriver, and a flat spatula type device to pry off plastic covers without marring. Here is the screen on U.S. eBay: http://www.ebay.com/itm/689690-001-NEW-HP-2000-2d19WM-LED-WXGA-HD-Glossy-Laptop-15-6-LCD-Screen-/360853608454?pt=US_Laptop_Screens_LCD_Panels&hash=item54048d1806 http://www.ebay.com/itm/HP-COMPAQ-689690-001-REPLACEMENT-LAPTOP-15-6-LCD-LED-Display-Screen-/131156654108?pt=US_Laptop_Screens_LCD_Panels&hash=item1e898bb81c $55.49 shipped on the low end. if this is "the Answer" please click "Accept as Solution" to help others find it.Read other 6 answers
Hi, I just made one of the clumiest mistake in my life. I recently dropped my 4 year old Dell Inspiron 15r onto the floor and now the screen is cracked, inside I think. I can turn it on but, I can't make out anything. What do I do? Is it cheaper to get a new laptop or get it fixed? If so any cheap, reliable places i could get it fixed? I'm not a really diy or tech savvy kind of person...please help.
Read other 6 answers
An animal in my household must have stepped on the screem to my laptop, cause now it is visibly damaged. Im looking into getting a new screen for my Dell. Any advice where?
Seems your having a run of bad luck arent you, first your cable box is dead and now an animal has smashed your laptop screen, seems that 2009 isnt going to be a good year for you...
Ebay is a good place to get screens however and they arent usually to hard to fit.
Take my advice and get rid of the animal, they are cheaper to replace than a laptop screen
We had finally gotten a computer (laptop) last week (which husband had to fix first ) to be able to do some work for someone. Just got it up & running 2days ago and while at a friend's, someone stood it up next to a chair, and it fell over & actually broke the screen (looks kinda like you swiped the screen with a few different colored paintbrushes)! Due to a wildfire in August, we are very short on money so we will probably have to try to find a screen on craigslist or something. My question is Is there ANY other models that are apt to have the same screen or that can be easily used? If so, which ones are apt to be compatible or, if you don't know, how can I find out???
Thank you very much for any/all help!
P. S. Hopefully this was the best subforum to put this in. If not, either let me know or feel free to move it for me. Thanks
A Google search for 2000-239dx LCD will turn up a number of pages of companies selling the screens and also people selling them on e-Bay. You could choose to buy from one of those sources. Some of the found pages may list other HP models that use the same screen.
Ok Im not sure where to start really but if anyone could help me i would be very greatful
i dropped my laptop ( ACER Aspire 5633WLMi, Aspire 5630 ) and now the screen is broken, half of it has gone black and cracked and im not sure how to fix this.
any advice / tips etc anyone?
Read other 7 answers
My brother in law dropped his laptop, which has resulted in a cracked screen and damaged plastics. Having replaced a screen before I ordered a new one, and have fit it, but alas no joy.
Before I go and pull the laptop to pieces I thought it would be a good idea to ask for some advice. Here are a few key points;
1. The replacement screen is brand new, and has had all its wires connected. There is no display on the screen. There was no display on the old damaged on either, I though the fall had damaged it completely.
2. The rest of the laptop works fine, I have hooked it up to a screen via the VGA output, and everything works fine.
3. When I right click and select properties>settings , it only displays the external monitor, no mention of the LCD.
So what do you suggest? I was thinking about pulling it apart and seeing if the LCD cable was still attached at the "other end", any thoughts?
Loose connections is all I can think of, mainly because all the other parts are obviously working (with the external monitor).
Hi there. My baby threw a mug on my HP Laptop screen and it has gone blank since then. Probably broken. I want to ask how or where I can go fix it or replace it in Leeds, United Kingdom or let me know if I can order a replacement online . Thanks.
Help us help you. What model laptop is it? We can certainly find the screen online likely for much less than you fear it will be and youtube has very good instructional videos for replacing just about any laptop screen. On most models it is not too hard to do, with some exceptions. http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00033108Read other 2 answers
Hello, I have a 2013-2014 , can't remember the exact year without going and pulling the receipt. However, over the last year I have been having a bunch of issues with the hinge holding the screen to the computer. I took it to a shop and when they took it apart they said the hinge is busted inside and I would need to replace the screen. I am wondering if I can just buy a hinge and replace that?? Thank you!Read other answers
I aquired an Aspire 4720Z laptop that the screen had been stepped on. I removed the screen (smashed on mid right side), but before removing (and after), I connected it to 2 different monitors--nothing appeared on either-black, power LED just blinks on/off although the computer sounds like it's working, lights come on, hear the drive , etc. I tried Fn +F8 and all other suggestions I could find, nothing. The laptop screen shows zero, not faded, nothing.Vusually, the inverter looks OK, no signs of anything else. Any suggestions as what to check/how to check while i have the screen off, what's next? --failure with the other 2 monitors bothers me.
When you hit the Fn+F8, did you wait a few seconds, then hit the combination again?
Make sure there isn't a small pin poking through near the hinge area above the keyboard that may be stuck (from being stepped on). This pin activates a switch when the lid is closed. (Some systems use a different method.) If there is a pin, be sure it works freely, is not stuck.
If the system was closed when the LCD was stepped on, it could have suffered damage under the keyboard, the video section of the motherboard, perhaps.
IMO Windows is huge pain when dealing with more than 2 screens. At work I have 3 screens and occasionally when I take out my laptop from docking station, it messes up the settings. Takes 5-10 minutes get it back to my original.
But that is not my question. At home I have a cracked laptop screen that no longer works. I have connect this laptop to my tv and am trying to use it as a htpc. My issue is I have not been able to find settings that disable the laptop screen, and for windows to ONLY use my tv as primary screen. The reason I need to disable the laptop screen is that when I have my laptop open (I need this to use the keyboard/mouse of the laptop), the tv screen is OFF (windows is thinking I'm using the laptop screen that is dead). Essentially I'm in a situation in which if I want to use laptop/keyboard, the default setting is the laptop screen. Right now I have to get the laptop lid closed, but barely open it for me to use the touchpad/keyboard.
What I'm looking for...
-Registry setting or permanently way of disabling the laptop screen.
-Permanent setting that always defaults the tv monitor instead of the laptop screen.
-I'm only going to use XBMC (windows to boot directly), and would prefer not to have setup the settings every time I turn it on.
-If above is not possible, anyway of setting Windows to think the lid is always closed?
There is a switch in the laptops bevel, short it to have always closed , check power options to see if that helpsRead other 6 answers
I have a problem regarding a broken laptop screen, nvidia drivers that failed to install and a system that now doesn't output via it's own hdmi port. Yikes.
The screen was cracked some time ago, but hey, modern Laptops (the model in question is a Gigabyte Q1732) all have hdmi out, so I procured a good screen and continued to use the Laptop.
However, during a recent system and disk cleanup one of the tasks I had set myself was correcting an issue with my graphics driver that was using the default on-board as opposed to the nvidia GT540m that it was equipt with. I took the opportunity to uninstall the intel driver and the subsequently install the nvidia driver before restarting, as the switch over did not work on my previous attempts. That was probably my biggest mistake.
The nvidia installation failed, prompting restart into safe mode.
The hdmi port no longer outputs and so, with the broken screen, I can't see what I am doing to try and fix anything.
I am running Windows 7 64 bit.
Could I set up remote desktop? Any suggestions would be greatly appreciated!
Our laptop screen no longer works (thanks to my son peeing on the computer!!!). We were connecting to our TV monitor via HDMI, but after my wife downloaded Windows 10, everytime we attempt to connect to the TV or any other monitor, we get a "no signal" message. I am computer illiterate, but I was hoping some knowledgeable people here would be able to assist.
I was putting my laptop back together after trying to fix the power fixture when the ends of the very thin black and red wires from the screen broke into pieces. Now I can't plug the wires back onto the motherboard. The piece that broke off was about 1/4" x 1/4", a little white connection piece that the very thin black and red wires were attached to.
I don't want to buy a whole new screen or whatever that part is that the red and black wires are attached to... just to connect these wires.
Do you have any suggestions? The ends of the red/black wires look like they have solder on the ends - see the picture. If I knew the name of the little white connection part, maybe I could buy a replacement part and try to make due.
Please help... don't want to buy a new screen...
Thank you very much.
Read other 16 answers
I have tryed using external monitor. But monitor wont load till after laptop is fully booted up .Read other answers
Ok, so I received an older laptop from someone, a Gateway NE56R43u. So the screen is broken....a big crack in it, can't see anything. It needs to be replaced and I plan on doing so when I get money, but until then I'm trying to see if anything else is damaged. I'm using an external monitor, but it only works when I get into Windows. I can't get a picture in DOS or even get into the BIOS. So when Windows comes up, I can see everything...through the external monitor that is. I went to upgrade it to Windows 10 and everything seemed fine, but it's either stuck on something or it's a part where it's not in Windows yet and needs some sort of manual input, but I can't see anything. The external monitor isn't showing anything. The monitor I'm using is an old Lite-On LCD. I'm using a VGA input. Again, works in Windows, but it's stuck and I can't see anything. Any ideas on how to get it back to where I can see it again? Thanks.
Does the laptop have an HDMI port?
If I use an HDMI cable, I see the BIOS on the tv. Strangely the laptop stays black until Windows has completely loaded.
I want to install either Windows 8.1 or Ubuntu on my laptop (Samsung R519) via USB however I cant because my laptop screen is broken.
When I turn on my laptop, my monitor doesn't display until it gets to the Windows 7 login screen. However I have forgotten the admin password meaning I cant nothing.
By chance is there a way to get to the boot up screen to boot from my USB?
If you have the boot menu enabled in the BIOS you can probably press the F-12 key to get the boot menu.
edit--- Boot Manager.
I just downloaded that game " We Happy Few" which requires 512MB of dedicated video RAM?
I saw a video on how to increase that, but as mentioned in the title, my laptop screen is broken and I'm only using this laptop with a 42 inch LCD connected by a VGA cord.
How can I change my dedicated video ram without resetting the computer, or at least maintaining the second screen during a restart?
Read other 6 answers
I have an HP Pavilion dv6000. However, the problem is that the screen's dead and I can't see for love nor money anything on it to be able to connect a TV screen to it to be able to use it as an external screen. The machine itself still works, the screen's just on the blink. I have NO idea what keyboard commands I'd have to use to blindly connect the TV to the laptop to make the TV turn into a computer screen. I have one cable attached to both the TV and the laptop, but do I need another? I think the cable I have right now is a VGA. Would you help, please? It's really important.
Don't think I need to mention the OS in this forum, but just cuz it's reminding me to do so in the banner - Windows Vista lol
I'm trying to fix my grandmothers laptop for her. Her mousepad stopped working and now the screen is frozen. I tried to unplug it from the wall and plug it back in, I pushed ctrl alt del, windows, esc, F1-F12 and nothing worked.
I now have it at my house and its still frozen, however I now have a message on the screen saying:
"The last attempt to resume the system from its previous location failed. Attempt to resume again?
(Use the arrow keys to highlight your choice.)
Continue with system resume
Delete restoration data and proceed to system boot menu
Its highlighted on the delete restoration data and proceed to system boot menu, but its frozen
This is a Toshiba laptop with Windows 7 and Internet Explorer
Have you tried entering the BIOS and running the Toshiba hardware utility?
BIOS can normally be accessed by pressing F2 as soon as the laptop is turned on.
If F2 does not work you may have to try Esc, F1, F12 or Delete key.
ive had this compuer for about 5 years now.and all of the sudden i get this fuzzy kind green line horizantaly across the screen(sometimes and reddish pinkish line is with the green line) and under the green line this film comes across my screen and it makes my color disorted recenly i just installed winows 8 and ive also downloaded the andy download and blue stacks could they be the problem if so how do i uninstall it off my pcRead other answers
my toshiba a10 laptop screen goes off and back on every few seconds. when in internet mode it's fine otherwise if I click on anything else it goes off and comes back on again.
It could be a bad inverter transformer. It is the transformer that supplies the correct power for the backlight. When the screen is "off", look very, very closely and see if you can detect a faint, maybe almost invisible, image on the screen. If so, it's the inverter.
A Dell Inverter:
Video on how to replace on a Dell:
You can do a Google search for your particular model number and some key words like replace inverter.
The hinges on my cousin's HP Pavilion ZV 6000 laptop have been broken and cracked for awhile. (One is broken, the other is cracked.) A few minutes ago he powered on the laptop only to find that the screen is completely black.
We're figuring that there must be a connection between the damaged hinges and the black screen.
We would greatly appreciate hearing from anyone who has an idea as to exactly what the problem is and how to go about fixing it.
Read other 7 answers
I need some files off an old laptop with a broken screen, but I don't remember the password so I've found some tricks to get into the account without a password via safe mode.
The problem of course is that in safe mode the laptop won't connect to an external monitor.
How can I get safe mode working on the external monitor?
Hi, better you take the hdd out of the old laptop and put it into a usb enclosure connect it up to another machine .Read other 2 answers