Over 1 million tech questions and answers.

BSOD Driver power state failure when shutting down /failure USBports

Q: BSOD Driver power state failure when shutting down /failure USBports

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, they fail.

Hoping for you guys to be able to help me fix this. I have managed to secure my recent files (tnx for the cloud) that weren't backed up yet. So no real risk there of losing anything. But would be great to not have to put it all back up. So if a total clean sweep could be avoided that would be great.

There's a zip-file with my memorydumps attached.

Tnx for all your help in advance!

Robbert

RELEVANCY SCORE 200
Preferred Solution: BSOD Driver power state failure when shutting down /failure USBports

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 142.4

Hi

I really hope someone can help me. I've been getting frequent BSODs of late, but currently I get one which stops the shutdown process - screen displays Windows Shutting Down for a considerable amount of time and then I get a BSOD - Driver Power State Failure. This basically prevents me from running checkdisk and other such utilities.

I've used BlueScreenView which highlights ntoskrnl.exe, which was involved in my previous BSODs.

I've uploaded 3 dump files as per directions (the only 3 I have after performing a clean up to try and fix the issue with CCleaner).

Help...please

A:BSOD when shutting down PC - Driver Power State Failure

What are the USB devices you are having?

Try removing them all other than the keyboard/mouse?

Also Upload the list of all the third party drivers Using NirSoft DriverView :
Download and execute Driverview
View > Hide Microsoft Drivers
Edit > Select all
File > Save Selected Items
In the Save dialog, Set the path to desktop, Put "Driverview" in the name field, and save.
Zip the .txt file and upload it.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8014cdb3f0, fffff80003c073d8, fffffa800f02dc10}

Probably caused by : usbccgp.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A drive... Read more

Read other 8 answers
RELEVANCY SCORE 142.4

Hi

I had a similar issue a few months ago and it has returned. When shutting down the PC, the shutdown procedure basically hangs for up to 5 minutes and then BSOD stating Driver Power State Failure.

I've deleted the two programs I thought may have been causing it as they seemed to be involved last time (Gigabyte's control panel for the motherboard and Spyder monitor callibrator) but neither have worked.

The attached dump files are over several days and are before and after removing said programs.

Any assistance would be most appreciated.

A:BSOD when shutting down PC - Driver Power State Failure

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8013af9a00, fffff800054693d8, fffffa8014160010}

Probably caused by : usbccgp.sys

Followup: MachineOwner
---------
Driver Reference Table
Perform a Windows Update and see if any USB drivers are available for installation.


Code:
GIGABYTE OC_GURU c:\progra~2\gigabyte\gigaby~1\oc_guru.exe Public Common Startup
I recommend uninstalling the above application - its known to cause BSOD's on some systems.

Read other 9 answers
RELEVANCY SCORE 142.4

I've been trying to get my Blue Snowball Microphone to work but it seems as if windows keeps installing the wrong driver, and it won't uninstall through the device manager. I believe this is the driver that is failing on shut down but i am not certain, and even if it was i am unsure how to fix it.

I'm running my Asus G75 on Windows 7 Home Premium x64, with an Intel i7-3610QM, and an Nvidia Geforce GTX 660m.

The device windows is installing instead of the microphone is USB Audio Class 1.0 and 2.0 DAC Device Driver.

A:BSOD while shutting down. Driver Power State Failure

Hi XlPoLaR04.

Daemon Tools is most problematic, all the times.

Code:
fffff880`0401b000 fffff880`04064000 dtsoftbus01 (deferred)
Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. It is the issue in your case.

Code:
fffff880`0377de08 fffff880`01065ce8*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x4bce8
Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it.
Click this button only:

If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Also, Trend Micro Internet Security is causing issues here, which is also expected.

Trend Micro Internet Security/ Housecall scanner

Code:
fffff880`0377dbe0 fffff880`078e3b70*** WARNING: Unable to verify timestamp for tmcomm.sys
*** ERROR: Module load completed but symbols could not be loaded for tmcomm.sys
tmcomm+0x1eb70
Description here: Driver Reference Table - tmcomm.sys

Trend Micro Internet Security

Code:
fffff880`0377dfc8 fffff880`07925c78Unable to load image \SystemRoot\system32\DRIVERS\tmevtmgr.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for tmevtmgr.sys
*** ERROR: Module load completed but symbols could not be loaded for tmevtmgr.sys
tmevtmgr+0x4c78
De... Read more

Read other 4 answers
RELEVANCY SCORE 142.4

Hi all, I am hoping someone can help me fix this BSOD problem without having to return my laptop. I started having this error when I first bought my laptop a few months ago (Lenovo G770) and reinstalling Windows didn't fix it. I thought it was to do with switchable graphics as I was having problems with that, but after several driver updates I'm still getting the problem.

Basically about half of the time my computer freezes on shut down, if I leave it long enough (5-10 mins) I get a blue screen with 'DRIVER_POWER_STATE_FAILURE'. Caused by address 'ntoskrnl.exe+7efc0' bug check code '0x0000009f'.

I attached the report made from SF Diagnostic tool, would be grateful if someone has the time to look at this. If any more info is needed I am happy to provide it.

Thankyou

A:BSOD 'driver power state failure' on shutting down

Welcome to SevenForums

Your .dmp files point toward a driver.

Code:
>[ 16, 2] 0 0 fffffa80091e73f0 00000000 00000000-00000000
Unable to load image \SystemRoot\system32\drivers\cm11264.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for cm11264.sys
*** ERROR: Module load completed but symbols could not be loaded for cm11264.sys
\Driver\ASUSU1
Args: 00016600 00000001 00000004 00000006
[ 16, 2] 0 e1 fffffa80091ebb10 00000000 00000000-00000000 pending
\Driver\ksthunk
Args: 00016600 00000001 00000004 00000006
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa80091bf0d0

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm cm11264
start end module name
fffff880`07818000 fffff880`079a3000 cm11264 T (no symbols)
Loaded symbol image file: cm11264.sys
Image path: \SystemRoot\system32\drivers\cm11264.sys
Image name: cm11264.sys
Timestamp: Tue Aug 23 13:44:13 2011 (4E535A4D)
CheckSum: 0013F60A
ImageSize: 0018B000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Product:C-Media USB Audio Driver (WDM) Company:C-Media Electronics Inc
Description:C-Media Audio WDM Driver

Suggestions:
Click on the Start ► Control Panel ► Programs ► Uninstall a program ► Uninstall everything related to; C-Media USB Audio. REBOOT then delete remnants of its drivers/older drivers using Driv... Read more

Read other 3 answers
RELEVANCY SCORE 142.4

Hi, I am rather new here, but It seems like you guys do awesome work when diagnosing problems and how to fix them.

I purchased a new computer back in September, and soon after I started to get a error, Power state Driver Failure when trying to shutdown. It would sometimes take up to 30 mins to shutdown, just to get that message.

Normally I would just manually power it down, because I would be going to sleep, and Did not want the computer running all night.

I do have a feeling that something else is not working correctly too, but I am not a computer whiz and thus can not understand most of the lingo discussed.

I followed the post you made about retrieving the necessary information for it to be diagnosed, and I will attach them here.

The first file is half of the Log since it went over 1.96 mbs. The second file is the other half, plus the performance Health Report.

Any Information to why my computer is giving me pains would be truly appreciated

Thank you very much,
Anthony

A:BSoD When shutting down (Power State Driver Failure)

These 3 drivers need updates - specifically the 1st - Intel NIC -

Code:
e1y60x64.sys Mon Aug 18 17:45:05 2008 (48A9ED61)
agrsm64.sys Mon Nov 10 10:01:35 2008 (49184CCF)
RTSTOR64.SYS Tue Dec 02 01:01:40 2008 (4934CF44)
See if the updates help the BSOD situation.

Regards. . .

jcgriff2

.


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\PalmDesert7\AppData\Local\Temp\SAL47B.tmp\120609-22854-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

WARNING: Whitespace at end of path element
Symbol search path is: SRV*C:\symbols*http://msdl.microsoft.com/download/symbols


Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`03015000 PsLoadedModuleList = 0xfffff800`03252e50
Debug session time: Sun Dec 6 15:02:49.724 2009 (GMT-5)
System Uptime: 0 days 3:36:42.770
Loading Kernel Symbols
...............................................................
................................................................
.....................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* ... Read more

Read other 19 answers
RELEVANCY SCORE 132

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 130.4

Hi! The last two months I have gotten BSoD with message Driver power state failure every few days. Also yesterday my computer couldn't boot up normally after this, and got the message that i had to reset the computer to an earlier point. That haven't happened before.

I have googled this BSoD message, but i kinda need a step-by-step guide how to fix this..

This happens when i turn off my computer by clicking start, and shut down. It loades forever, and then the BSoD pops up.

Any ideas? Really appreciate the help i can get

(Added files from DM Log Collector)

A:Driver power State Failure when shutting down

Please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a report here.

Read other 7 answers
RELEVANCY SCORE 126

Hello
Firstly apologies for the length of this post. 
I have a Dell Inspiron 3847 running Windows 10 64-bit which was an upgrade from Windows 8 last year. The OS build is 10586.218. The version is 1511.  It has an Intel Pentuim CPU G3240, 3.10GHZ and 4 GB RAM.
The only USB devices attached are the keyboard and mouse.  
I have had no real issues with it until about three weeks ago.
When I click shutdown it often hangs. The monitor goes into sleep mode (the light changes from green to orange) but the hard drive and fan are still spinning. This can go on for minutes and I either have to kill it with the power switch or leave it to carry on then I get a BSOD and it restarts and then seems to shut down fine.
I unfortunately did not do a system restore after the first time as nothing had been updated in some time.  Since then the problem has reoccurred every few days. I have now done the following:

I ran a full Dell system scan which indicated no issues
I did a Dell download and driver scan and allowed it to update all drivers and the BIOS it located as out of date
I manually updated the drivers for all devices
I did a full virus scan and a malware scan. There were no issues.
I ran Windows Update multiple times to make sure everything was fully updated. It was.
I ran sfc scannow and there were no issues.
I changed the settings so it was no longer doing a "fast start-up"
After this the problem seemed to have gone away for a few days. Then it started ag... Read more

A:Inspiron 3847 Not Shutting Down - Driver Power State Failure/ VGA Issue

Hi RXCGB,
Thank you for writing to the Dell Community Forum.
If you have added any new hardware please try removing or updating them, check the system in safe mode. In Device Manager Check if any devices are marked with the exclamation point (!). Uninstall the Video driver and then please refer to this link http://dell.to/24ERM0F and install the Intel HD 4000 Series Graphics Driver. Please uninstall and reinstall the Graphic card driver too, if your system is shipped with nVIDIA Geforce GT6XX/7XX/8XX/9XX Series card. Also uninstall and reinstall the Chipset driver on the system.
Please reply if you have any further questions.

Read other 1 answers
RELEVANCY SCORE 119.6

Hey, I got some BSOD problems. Do you got time & experience to help me?

I got Windows 8 at the moment, I will install 8.1 shortly. Had 8.1 before i re-installed OS when the first BSOD showed up, so I doubt that 8.1 will fix things completely.

My problems ATM!

- Driver Power State Failure
- Video TDR Failiure (nvlddmkm.sys)
- Screen freezes at start up or when I get to the desktop
- Have to Disable my NVIDIA GeForce GTX 675M to use the CPU (Windows has stopped this device because it has reported problems. (Code 43).

Got two other kinds of BSOD before I re-installed windows but don't remember what they said, I just felt like "Hey I need to re-install my OS anyways so w/e". But apparently that didn't solve the problems.

I also gained "NVIDIA Windows Kernel Mode Driver, Version 340.52 stopped working While playing CS:GO" but that was before I re-installed windows. And now to use my CPU I need to go into Device Manager and shutdown my NVIDIA card to be able to use the CPU and use the Intel card instead. If I don't shut it down my CPU will freeze the screen for days, til I restart or I get a BSOD.

I will buy a can of air and open up my laptop and blow some dust away, perhaps that could help? Perhaps the NVIDIA card is burned/broken and I have to buy a new PC?

I've tried a few different driver for my NVIDIA card also, nothing works.

I'm no computer expert and thats why I'm here begging for help, so if someone could help me out here I would appreci... Read more

A:Driver Power State Failure,Video TDR Failure(nvlddmkm.sys)

Hi Markmsigt60 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Fri Sep 26 06:15:51.972 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\092614-55906-01.dmp]

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Windows 8 Kernel Version 9200 MP (8 procs) Free x64

Built by: 9200.16912.amd64fre.win8_gdr.140502-1507

System Uptime: 0 days 0:07:07.738

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Probably caused by : ntoskrnl.exe ( nt+5a540 )

BugCheck 9F, {3, fffffa800892b880, fffff8800326a7f0, fffffa80089c3e10}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800892b880, Physical Device Object of the stack
Arg3: fffff8800326a7f0, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: fffffa80089c3e10, The blocked IRP
BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

FAILURE_BUCKET_ID: WRONG_SYMBOLS

CPUID: "Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz"

MaxSpeed: 2400

CurrentSpeed: 2395

BIOS Version E16F3IMS.50R

BI... Read more

Read other 3 answers
RELEVANCY SCORE 119.2

After having to do a complete system restore (automatic repair loop) my computer now comes up with the Driver Power State Failure BSOD when restarting, shutting down and turning on normally works fine.
I don't really want to try and navigate through all the windows updates as that requires a lot of restarting, and usually some sort of software conflict means it all gets put back anyway.

As far as I can remember, the 47015-01.dmp and 41125-01.dmp occurred 8 hours earlier than the file creation time, as my time zone was set to UTC-8, and i'm on GMT.

Thanks in advance.

A:BSOD- Driver State Power Failure

Lenovo HD Disk Driver needs to be updated:


Code:
1: kd> lmvm LhdX64
start end module name
fffff880`01e97000 fffff880`01ea5000 LhdX64 (deferred)
Image path: \SystemRoot\System32\DRIVERS\LhdX64.sys
Image name: LhdX64.sys
Timestamp: Mon Jan 11 10:06:58 2010 (4B4B3E92)
CheckSum: 0001784C
ImageSize: 0000E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


While at their site, also update Intel and NVIDIA video drivers just to be nice to the system.

Consider removing AVG as a test, if necessary.

Read other 3 answers
RELEVANCY SCORE 119.2

In the last couple of months, my laptop occasionally crashes while it is shutting down - it would be "Shutting Down" for 5-10 minutes - longer than usual. Then, there would be a BSOD, sometimes labelled "Driver Power State Failure". Then, it would reboot by itself.

Attached is the output from the DM Log Collector.

Please help.

A:BSOD Driver Power State Failure

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8008244e10, fffff80000b9a4d8, fffffa8007f54b30}

Probably caused by : vwifibus.sys

Followup: MachineOwner
---------

0: kd> !irp fffffa8007f54b30
Irp is active with 4 stacks 3 is current (= 0xfffffa8007f54c90)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 3] 0 e1 fffffa8007693050 00000000 fffff80003119210-fffffa8003fc2010 Success Error Cancel pending
\Driver\vwifimp nt!PopSystemIrpCompletion
Args: 00016600 00000000 00000006 00000006
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8003fc2010

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm vwifibus
start end module name
fffff880`056d6000 fffff880`056e3000 vwifibus (pdb symbols) c:\symcache\v... Read more

Read other 1 answers
RELEVANCY SCORE 119.2

Hey there again guys! Recently my computer has been giving me a handful of BSoDs lately, claiming to have shut down because of a "driver power state failure". I've done my Google homework on this problem, but none of the forums I've checked were specific to the issues I've been having with my system. They include: updating drivers, deleting certain things and etc, but they all have different stuff on their computer than I have. It's happened to me five times since it started, last week or so. I'd love you forever if you could figure out for me why I keep getting my BSoDs!

I've attached the .dmp file and thank you guys! <3
 

A:BSoD -- driver power state failure

When does the BSOD occur?
I'd start by taking out any add-on peripherals inside your PC. Leave only the required components required to get into Windows connected - motherboard, ram, cpu, graphics card (if neccesary), and hard drive.
If it continues with this setup, i think it may be graphics drivers.
 

Read other 1 answers
RELEVANCY SCORE 119.2

Hi, I have a problem with a blie blue screen.
I have a Toshiba Satellite Vista 64 amd turion x2 with OEM software. I just did a full system restore, and still have the same issue of crashes. For a while it started with seeming to be hot, then turning off, now BSOD.
OS - Vista/ x64
? What was original installed OS on system? same
? OEM version (came pre-installed on system)
? Age of system (hardware) approx 4 years
? Age of OS installation - have you re-installed the OS? two days

? CPU amd turion x2 TL-6 2ghz
? Video Card not sure
? MotherBoard
<DEVICE><DESCRIPTION>System board</DESCRIPTION><HARDWAREID>ACPI\PNP0C01</HARDWAREID></DEVICE> <DEVICE><DESCRIPTION>Motherboard resources</DESCRIPTION><HARDWAREID>ACPI\PNP0C02</HARDWAREID></DEVICE> <DEVICE><DESCRIPTION>Motherboard resources</DESCRIPTION><HARDWAREID>ACPI\PNP0C02</HARDWAREID>
? Power Supply - brand & wattage

? System Manufacturer toshiba
? Exact model number (if laptop, check label on bottom) p305d s8995e

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA800613E050
BCP3: FFFFFA80062CF060
BCP4: FFFFFA80050804C0
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\Mini121211-03.dmp
C:\Users\Ed\AppData\Local... Read more

A:bsod driver power state failure

ati radeon video card x1250 8.401.0.

Read other 10 answers
RELEVANCY SCORE 119.2

I have been getting this random BSOD from time to time. I'm using a laptop and I'm not sure how and when this started. Occurs when the charger is either plugged or unplugged. Any help will be appreciated. Thanks

A:BSOD Driver power state failure

Make sure your dump logging is enabled.
Click Start, point to Settings, and then click Control Panel.
Double-click System.
Click the Advanced tab, and then click Settings under Startup and Recovery.
Check Write an even to the system log, and Automatically restart.
In the Write debugging information list, click Small memory dump (256k).

Location of Dumps:
C:\Windows\minidump

Allot of important info is missing from your zip, please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a new report here.

Read other 4 answers
RELEVANCY SCORE 119.2

OS: Win7 Pro-N x64 SP1. I do not know if there was ever another OS on this machine.

Age of system unknown. CPU is an Intel Core2 Quad Q9450, 2.66GHz. I have not reinstalled the OS, and it is unknown when the OS was last installed/repaired/reinstalled. Video card is currently an NVidia GeForce 8400 GS; it used to be an ATI Radeon HD 3650, but that board gave out and was replaced a few months before this problem started happening. MB is an Intel chipset, I don't recall the specific make/model. The computer is a custom build, so no overall manufacturer.

I seem to have a common problem; Windows 7 will take a very long time (10-20 minutes) to shut down or restart, and will eventually fail with a DRIVER_POWER_STATE_FAIL BSOD. After the dump, Windows starts right back up and shows the domain login screen. After entering credentials, there is another long wait before the desktop displays.

A:BSOD - Driver Power State Failure

Hi and Welcome to TSF

Did you install Fresh OS since the motherboard has been replaced?

When you replace a motherboard you need to install Fresh OS on the Hard Drive with the right drivers for the current motherboard

Read other 3 answers
RELEVANCY SCORE 119.2

While surfing the web, I suddenly got this BSOD that says something about a driver power state failure.  I don't know if this is the only incident, or if this is going to repeat in the future.  I am not that much of a computer wiz, so I would like to know what is causing this BSOD, and if this is an isolated incident or a recurring one?

A:BSOD driver power state failure

 Please post the exact message and error code.

Read other 22 answers
RELEVANCY SCORE 119.2

Hi. Every time I shut down, I'm getting the good old BSOD with the message DRIVER POWER STATE FAILURE. I attach TSF_Vista_Support.zip containing TSF_Vista_Support files and PERFMON.html. System spec below...

Windows 7 Home Premium 32-bit
Previous OS - Windows Vista
System is 8 months old, 4 months since Windows 7 installation
1.4Ghz Intel Core2 Solo
Motherboard: Acer Aspire 4810T Base Board Version
3GB RAM
Controller: Intel(R) ICH9M-E/M SATA AHCI Controller
Display: Mobile Intel(R) 4 Series Express Chipset Family

I hope that covers everything. Any help would be much appreciated as I have no idea what is going on! Many thanks in advance

A:BSOD Driver Power State Failure Win 7

Hello and Welcome to TSF,

From what you are stating here - Do have any external USB devices attached to the computer? were they attached when you reinstalled another operating system?

Read other 4 answers
RELEVANCY SCORE 119.2

I know little about computers but I can follow directions well.

This is my computer

OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, Intel64 Family 6 Model 23 Stepping 6
Processor Count: 2
RAM: 4089 Mb
Graphics Card: NVIDIA GeForce 9800M GTS , 1024 Mb
Hard Drives: C: Total - 295242 MB, Free - 181383 MB;
Motherboard: Gateway , IMV , Not Applicable , INVALID
Antivirus: avast! Antivirus, Updated and Enabled

It has been giving me the blue screen of death at least daily for over a week usually around 8 pm but it does like to mix things up and do it at other times. It was doing this same kind of thing this past march and I reformated which fixed the problem. However I would rather not do that again. I did a system restore back to the begining of the month but that didn't help.

Based on Blue screen viewer most of my prolems have been caused by ntoskrnl.exe. I have attached JPEGs of what it shows
 

Read other answers
RELEVANCY SCORE 119.2

Hi

i recently bought a second hand alienware and i am constantly getting driver power state failure bsod

is this the code you need for someone clevere than me to tell me whats causing the problem

9f
BCP1: 0000000000000003
BCP2: FFFFFA800D619A10
BCP3: FFFFF80000B9C3D8
BCP4: FFFFFA801392F560
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

thanks in advance

A:driver power state failure bsod

btw iv updated drivers and bios from dell and ran the diagnostics checks the last bluescreen analyzer is this




0x0000009F_0x0000000000000003__0xFFFFFA800D595A10__0xFFFFF80000B9C3D8__0xFFFFFA8012C68A90_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D5B3A10__0xFFFFF80000B9C3D8__0xFFFFFA801265FB40_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D5D5060__0xFFFFF80000BA2748__0xFFFFFA80125D4490_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800F9F1E10__0xFFFFF80000B9C3D8__0xFFFFFA8012AB9C60_C__Windows _system32_drivers_hdaudbus_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D618060__0xFFFFF80000B9C3D8__0xFFFFFA8011AFE1B0_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D614A10__0xFFFFF80004157748__0xFFFFFA8013485400_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D5D9A10__0xFFFFF80000B9C3D8__0xFFFFFA8012A47CA0_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D617060__0xFFFFF80000BA2748__0xFFFFFA80128E54D0_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D597A10__0xFFFFF80000B9C3D8__0xFFFFFA801262B200_C__Windows _system32_drivers_pci_sys, 0x0000009F_0x0000000000000003__0xFFFFFA800D610A10__0xFFFFF80000B9C3D8__0xFFFFFA800D7FA800_C__Windows _system32_drivers_pci_sys

Read other 9 answers
RELEVANCY SCORE 119.2

I have been using my new machine for a little over two weeks now. Twice I have come to sit down at the machine in the morning and the laptop display would correctly illuminate, while the external monitor would not. None of the windows on the screen were responsive to mouse clicks and the machine was not responsive to any of the keys on the keyboard. The mouse cursor would move.

Today I eventually got a BSOD:
DRIVER_POWER_STATE_FAILURE
STOP 0x0000009F (xxx1, xxx2, xxx3, xxx4)

I preserved the minidump and captured sysinfo. They are attached.

Any suggestions or thoughts?

A:9F: Driver Power State Failure BSoD

The dump file blames monitor.sys (a part of Windows Vista) - so I would suspect your video sub-system at this point. I would start with updating any video drivers/video related software on your system.

I notice that you had Visual Studio crashes - are you running any custom programs?

I would suggest running SFC.EXE /SCANNOW from an elevated (Run as Adminstrator) Command Prompt also.

Here's a list of outdated drivers on the system. I would update them also (NOT from Windows Update):

Code:
AtiPcie.sys Mon Nov 06 11:59:54 2006 - AMD PCIE Filter Driver for ATI PCIE chipset - AMD PCIE Filter Driver - Advanced Micro Devices Inc. (I think that this is most likely the problem)
mdmxsdk.sys Mon Jun 19 17:27:26 2006 - Conexant modem driver
rtlprot.sys Fri Apr 20 05:16:48 2007 - Realtek WLAN driver
tdcmdpst.sys Mon Dec 10 21:29:00 2007 - Toshiba ODD Writing Driver
Thpevm.SYS Mon Sep 03 21:13:06 2007 - TOSHIBA HDD Protection - Shock Sensor Driver
tos_sps64.sys Thu Nov 15 00:12:58 2007 - TOSHIBA tos_sps64 Service
TVALZ_O.SYS Thu Nov 08 22:08:41 2007 - TOSHIBA ACPI-Based Value Added Logical and General Purpose Device Driver
Memory dump:

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\FUBAR\TempDUMP\DATA\01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/d... Read more

Read other 7 answers
RELEVANCY SCORE 119.2

? OS - Vista/ Windows 7 ? Windows 7 Home Premium
? x86 (32-bit) or x64 ? 32-bit
?What was original installed OS on system? Yes.
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Factory installed.
? Age of system (hardware) 15 months.
? Age of OS installation - have you re-installed the OS? Haven't reinstalled.
? CPU Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz (2 CPUs), ~2.0GHz
? Video Card NVIDIA GeForce GT 130M
? MotherBoard Mobile Intel(R) 4 Series? I'm unsure of how to find this information.
? Power Supply - brand & wattage Unsure about this as well.
? System Manufacturer MSI
? Exact model number (if laptop, check label on bottom) MS-1722

Hello, I've been having some problems with recent random BSODs. I had the same problem several months ago, but it went away on it's own. If you could give me any ideas on what's up and how we can fix it, I'd really appreciate it. Thank you!

A:BSOD: Driver Power State Failure?

Please uninstall Daemon Tools as it's sptd.sys driver is known to cause BSOD's on Win7 systems. Then use this free tool to ensure that the offending sptd.sys driver is removed from the system: DuplexSecure - FAQ

The BSOD's blame o2sd.sys - a component of your Memory Card Reader software by O2Micro. Please download and install this driver to see if that fixes the problem: MSI Global ? Download Center
Also, please take care of these:
OLDER DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please update these drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers:

Quote:





Code:

sptd.sys Sun Oct 11 16:54:02 2009 (4AD245EA)
iaStor.sys Thu Jun 04 21:42:33 2009 (4A287809)
amdxata.sys Fri Mar 19 12:19:01 2010 (4BA3A3F5) - Windows Update will take care of this if it's available
speedfan.sys Sun Sep 24 09:28:47 2006 (4516880F)
giveio.sys Wed Apr 03 22:33:25 1996 (316334F5)
dump_iaStor.sys Thu Jun 04 21:42:33 2009 (4A287809)
LMouFilt.Sys Tue Aug 24 1... Read more

Read other 3 answers
RELEVANCY SCORE 119.2

I am getting the bsod error driver power state failure. It appears to be random unless i go to play star wars the old republic and it does it with in about 10 minutes of playing every time. This is fairly recent. I was playing it before for several hours with out trouble, and now it does it outside of the game. I hope you can help. Attachment 312126

Attachment 312127

A:BSOD Driver Power State Failure

Hi punkiemi.

How many days ago you installed Service Pack 1? Very recently it seems?

The zip contains two crash dumps. One, the older one is related to games. And, this time the PC was not SP1 installed.

Code:
BugCheck 116, {fffffa80066fb010, fffff8800517e664, ffffffffc000000d, 3}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+97e664 )

Followup: MachineOwner
---------
Taking the age of your PC into consideration, stop 0x116 BSODs may occur under certain conditions.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

The PC seems to be overclocked.

Code:
Max Speed 2300MHz
Current Speed 2310MHz
As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the the wattage of the PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Install the NVIDIA DRI... Read more

Read other 1 answers
RELEVANCY SCORE 119.2

Hi, i'm constantly receving a BSOD on shutdown. The picture is attached.

These are my specs:
? OS - Windows 7 ?? x64 ? ? This one? ? All purchased from retailer? ? Bought it 2 months ago ? I havent reinstalled anything? ? Intel Core i5 ? Radeon HD 6490m ? HP ? ProBook 4530s

I wasn't able to retrieve the Perfmon report because it crashed. Nevertheless I joined the all the windows .dmp files.

A:BSOD Driver Power State Failure

MSINFO32 blames the drivers for your USB 3.0 controller.
Download and install this driver: http://h20000.www2.hp.com/bizsupport...tem=ob-97228-1

Most likely the above will fix the problem. If not, post back and we'll run hardware tests. Good luck!

Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs:
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please either update the older drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers.

Code:

iaStor.sys Wed Jan 12 20:50:12 2011 (4D2E5A54)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
aswSnx.SYS Mon Nov 28 12:54:05 2011 (4ED3CABD)
btfilter.sys Tue Jan 04 04:41:55 2011 (4D22EB63)
aswTdi.SYS Mon Nov 28 12:52:18 2011 (4ED3CA52)
MfeEpePc.sys Wed Feb 09 06:59:50 2011 (4D5281B6)
hpdskflt.sys Fri May 13 14:47:02 2011 (4DCD7CA6)
sncduvc.SYS ... Read more

Read other 1 answers
RELEVANCY SCORE 119.2

First let me give a huge "THANKS" for this extremely helpful forum and service. I would not have any hope of correcting this issue on my own or without giving up my machine for a few days to an IT pro to fix it, which I do not have the luxury of time to do.

Here are my details:

? Windows 7 Professional (6.1.7601 Service Pack 1 Build 7601)
? x64
? Vista Premium (2009)
? Original Vista was installed already, Windows 7 upgrade came from a retailer and I installed it.
? Age of system (hardware) - 3 years
? Age of OS installation - have you re-installed the OS? I have not re-installed, but there are multiple copies of it because I added a new HDD and cloned the original before making the new one the primary HDD.

? CPU - Intel Core2 Duo T9550 @ 2.66GHz
? Video Card - NVidia GeForce GT 130M (1GM VRAM)
? MotherBoard - Don't know
? Power Supply - 90W, brand unknown

? ASUSTek Laptop
? N90SV


Thank you again for this service. I look forward to your diagnosis.

A:BSOD: Driver Power State Failure

From the last 9, 3 are corrupt, 3 are inconclusive, and 3 name the USB hub driver.
Do you have anything plugged into a usb port?
Is there any memory card in the card reader?(it runs off the USB hub)

athrx.sys Mon Oct 5 12:33:57 2009
Atheros AR928X Wireless Network Adapter Driver, if there is nothing from 2012 on the Asus page for your model this is the best place I know of to get it >
ATHEROS drivers for Microsoft Windows (Atheros?????)

There appears to be a USB web cam set as disabled in device manager, was this done manually by you, or did Windows do it(because of a problem)?
USB 2.0 UVC 1.3M WebCam USB\VID_064E&PID_A116\CN1316-S30B-MI03-VS-R03.01.03 This device is disabled.

I'm also seeing older AVG drivers
avgldx64.sys Thu Jun 3 1748 2010 (4C081968)
avgmfx64.sys Wed Aug 17 07:31:52 2011 (4E4BA6A8)
avgrkx64.sys Wed Feb 10 22:52:44 2010 (4B737F0C)
And
a2ddax64.sys Thu May 19 08:09:43 2011 (4DD50887)
a2dix64.sys Wed Nov 2 05:10:36 2011 (4EB1090C)
a2util64.sys Fri Oct 16 06:26:21 2009 (4AD84A4D)
EMSISOFT/A-SQUARED MALWARE-IDS UTILITY DRIVER

Are you using both programs? Is either one up to date?

ghaio.sys Mon May 30 05:34:05 2005 Way too old for a Win7 driver> ASUS NB Probe program> Check the Asus site for an update.

These are Vista era Suyin USB 2.0 Webcam drivers
sncduvc.SYS Mon Jul 7 06:30:20 2008
snp2u... Read more

Read other 11 answers
RELEVANCY SCORE 119.2

Hello there, I hope someone would be able to point me in the right direction of the cause of a BSOD. I have pasted the memory dump below.

Thanks in advance.
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Eden of Africa\Documents\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9200.16912.amd64fre.win8_gdr.140502-1507
Machine Name:
Kernel base = 0xfffff800`6ce07000 PsLoadedModuleList = 0xfffff800`6d0d3aa0
Debug session time: Wed Oct 8 07:14:18.844 2014 (UTC + 2:00)
System Uptime: 0 days 17:52:34.531
Loading Kernel Symbols
...............................................................
................................................................
...............................................................
Loading User Symbols
Loading unloaded module list
..........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*********************************************... Read more

A:BSOD - driver power state failure - IRP

Hello, Welcome to EF!

To be able to better help you, please follow the Blue Screen of Death (BSOD) Posting Instructions

-Justin

Read other 1 answers
RELEVANCY SCORE 119.2

Hello,

I have some recent issues with BSOD after start up. After that my laptop just reboots and works fine for the remainder of the day. I recently did a complete clean install of windows 7, because before that I also had some issues with BSOD. See attached the zipfile,

best regards

Peter

A:BSOD Driver power state failure

Your logs are incomplete, important files are missing that we need to analyze your issue/s. Follow Blue Screen of Death (BSOD) Posting Instructions, let the tool run until it has completely finished and then upload the new logs.

Read other 9 answers
RELEVANCY SCORE 119.2

OS - Windows 7 pro x64 - In place upgrade (since November 2009)

original installed OS - Vista Business x64 - OEM

System is 1 year and 3 months old

CPU - Intel Core 2 Quad Q6600 @ 2.40GHz

Video Card - Nvidia Geforce 9500 GT (1GB)

Motherboard - Asus - IBIBL - LB (benicia)

power supply - Coolmax M-500B - 500watts

The past week I noticed that every time I put my computer to sleep, I would notice that my monitor would either stay on or I'm assuming after a short while come back on while the rest of the computer was sleeping. My monitor by the way is a Samsung Syncmaster 2232BW plus. I noticed this monitor staying on problem at least 3 times this week. So today, I left my computer on, and when it tried to automatically enter sleep mode, a stop error occurred. This is the first time that I got this blue screen as the computer tried to enter sleep mode. Other system information that might be useful: I have a wireless mouse and keyboard, both logitech and both are operating with setpoint. I also have a Creative SB X-Fi sound card installed. Furthermore, shortly before this post I went to device manager and updated the driver for my videocard.

A:Driver Power State failure BSOD

Hi -

The bugcheck on the single dump file -

0x9f (0x4,,,) = driver is causing an inconstant power state - it is not able to sync with the PnP subsystem. The default NT Kernel named as probable cause.

I believe it to be a combination of NIC + Norton Internet Security.

Your D-Link DWA-556 Xtreme N PCIe Desktop Adapter driver must be updated - too old for Windows 7 -

Code:

jswpslwfx.sys Mon Apr 28 19:59:25 2008 (481664DD)

However, there are NO Windows 7 drivers listed for it and the April 2008 Vista driver appears to be the most recent available.

D-link Support DWA-556 --> http://www.dlink.com/products/?pid=DWA-556&tab=3

If you cannot locate an updated driver, the device will need to be replaced.

Remove NIS/ N360 from your system -

Download the Norton Removal Tool (NRT); save to desktop. Boot into SAFEMODE - NO Networking. Tap F8 key during boot-up. Go to desktop, RIGHT-click on the NRT icon and select Run as Administrator. When complete - re-boot.

NRT - ftp://ftp.symantec.com/public/englis...moval_Tool.exe

Reset the Windows Firewall to its default settings -
START | type firewall.cpl | select firewall.cpl above under programs | top-left, select "Restore Defaults"

Install MS Security Essentials --> http://www.microsoft.com/Security_Essentials/

Regards. . .

jcgriff2

.

Windows 7 RTM x64 -- BSOD Bugcheck 0x9f (0x4,,,)

Code:
Opened log file 'C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\_... Read more

Read other 2 answers
RELEVANCY SCORE 119.2

Hi all,

Since I installed Win 7 64 bit Home on my HP 6735s laptop (originally Vista 32 bit) I keep randomly getting the DRIVER_POWER_STATE_FAILURE, it's just random so I wonder if you can help.

I also never got this in Vista though I have swapped the network card for HP's recommended Wireless N card.

? OS - Windows 7
? x64
? Original OS Vista 32 bit
? Original OS was OEM, new is Full Retail
? Approx 2 years old
? Age of OS installation - When Win 7 came out, Oct last year? Never been reinstalled.

Will attach the requested files :)

Cheers,
Paul.

A:[BSOD] Driver Power State Failure Win 7 x64

...and the perfmon file :)

Read other 9 answers
RELEVANCY SCORE 119.2

Hey guys,

I recently started getting the Blue Screen with the title driver_power_state_failure every time I try to shut down or even just make it sleep. The BSoD comes up and the computer keeps running until I press on hold the Power button.
Hope somebody can help me. I have uploaded my DxDiag and the AutoRun-file(2 of them).
I tried getting the the performance-report and the file from the BSOD_Windows7_Vista_v2.64_jcgriff2_ program but when it comes to where it says Waiting for Systeminfo it gets stuck and keeps posting that message
Just say if you need something more.

My system is the following(can be found more exact in the DxDiag):

OS: Windows 7
Motherboard : GIGABYTE GA-990FXA-UD3 (rev. 1.0)
GFX : XFX Radeon HD 6970 (2 GB)
RAM : Corsair 8GB DDR3 2000MHz (2x4) XMS3
Processer-cooler : Scythe Mugen 2 rev.B SCMG-2100
PSU : Corsair Enthusiast Series TX850 V2
HDD : Samsung 1000 GB F3 32 MB
CPU : AMD Phenom II X4 965 Black Edition
CD-rom drive : Lite-On iHAS122 - DVD?RW Black

Thanks for reading, and hopefully helping!

Regards,
Sune Christensen

A:BSoD driver power state failure

Hi -

Sorry, but there is nothing I can do with the 4 files in the zip attachment - simply not enough info to go on.

Run Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or until it BSODs your system, whichever is less. Then . . .

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions - Windows 7 & Vista

Also, run Speccy - http://www.filehippo.com/download_speccy
- "File" | "Publish Snapshot" | Paste URL into your next post

Regards. . .

jcgriff2

`

Read other 1 answers
RELEVANCY SCORE 119.2

this is happening every day now, can anyone help?

A:BSOD driver power state failure

Hi,
Please reconfigure windows to collect the correct info
You want small memory dumps - "MiniDumps"

http://www.sevenforums.com/tutorials/174459-dump-files-configure-windows-create-bsod.html

And here are the instructions for posting:

http://www.sevenforums.com/crashes-d...tructions.html



   Tip
Ensure you click the "GRAB ALL" button and then wait for each window to appear in turn and then click OK

Cheers

Dave

Read other 9 answers
RELEVANCY SCORE 119.2

Laptop works fine as long as monitor doesn't go to sleep or if computer is shutdown. After a certain period of time when monitor goes to sleep, BSOD appears and then computer restarts. If I try to shutdown the laptop, it hangs. Screen just says "Shutting Down" for approximately 10 minutes and then get BSOD. Works fine in Safe Mode. I have 2 additional files that I will have to post in the thread. Any help would be greatly appreciated.

OS - Win 7 (x64)
HP HDX Laptop purchased in November 2009 with Vista...upgraded to Win 7 in December
CPU - Intel Core 2 Duo - P7450 / 2.13 GHz
Video Card - NVIDIA GeForce 9600M GT
Not sure about motherboard and power supply data...let me know where to find it and I will post.

Thanks!

A:BSOD - Driver Power State Failure

Attached are 2 additional files.

Read other 1 answers
RELEVANCY SCORE 119.2

Hi there, begging someone to help me.
Today when I using my laptop it stucked ,and I reboot it by press the power button,and when it rebooted it stucked at Welcome,and then the blue screen then driver power state failure I tried to reinstalled my os but problem was still here. I found when I uninstalled the Nvidia driver the os can work normally. Really really want someone to help. Thx a lot.

A:BSOD driver power state failure

  
Quote: Originally Posted by Mucbox


......... driver power state failure ..................
I found when I uninstalled the Nvidia driver the os can work normally.


Good info. It occurs.

We need to see the data as per the Blue Screen of Death (BSOD) Posting Instructions.Attach it in your next post in this thread.

Read other 8 answers
RELEVANCY SCORE 119.2

I've searched the forums and this seems to be a common bsod but varying in drivers that need to be updated.

? OS - Windows 7 ?
? x64
hp dm1z laptop


Originally, my problem was that I would put my computer into sleep or hibernate and I would be unable to recover back into windows. HP helped me turn the power settings off and on thus resetting it and it fixed it.

But now my computer hits BSOD once it's been asleep for about 10-15 mins, extended periods. It'd show BSOD out of no where!

A:BSOD - Driver Power State Failure

Hi,

The single BSOD blames your wireless networking driver.

Code:
athrx.sys Tue Sep 22 14:47:11 2009 (4AB83AAF)
See if an update fixes it - http://welcome.hp.com/country/us/en/support.html

Regards,
Reventon

BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Dec 17 18:21:38.883 2010 (GMT+13)
System Uptime: 0 days 0:55:21.662
*** WARNING: Unable to verify timestamp for athrx.sys
*** ERROR: Module load completed but symbols could not be loaded for athrx.sys
Probably caused by : athrx.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`0316aa20 fffff800`00b9c518 fffffa80`02f7c7d0
??????????????????????????????????????????????????????????????????????????????????????``

Read other 1 answers
RELEVANCY SCORE 119.2

Hi

I recently changed the case and added some internal peripherials to my computer. I have a 950W power supply so what I have should not be Bluescreening my computer. I cannot open the ,dmp files to find out what is going on. Can anyone help?

My system:
Win 7 Ultimate 32bit
950W power supply
4 hard drives
2 Super Mulit Optical drives
1 flash card bay
Asus motherboard (that was running fine before I changed cases)
in win IRONCLAD case (4 120 fans, and 1 huge fan)

I am attaching the BSOD for today as a zip file.

A:BSOD with Driver power state Failure

Make and model of your Asus mobo?

Please post the info from this topic: http://www.sevenforums.com/crashes-d...tructions.html

Initial triage suggests a problem with vclone.sys - a component of your VirtualCloneCD driver.
This theory is also supported by the presence of drivers related to it that date from 2002 (ElbyCDFL.sys and
ElbyVCD.sys)
I'd suggest uninstalling it to see if that stops the BSOD's

Also, your Norton shows up in the memory dumps, so I'd keep an eye on that.

PLease remove or update these older drivers. DO NOT use Windows Update or the update function of Device Manager:

Code:

ElbyCDFL.sys Thu Nov 28 09:18:04 2002 (3DE6259C)
- ElbyCDIO Filter Driver
- Driver Reference

dvd43llh.sys Mon Feb 07 13:16:49 2005 (4207B091)
- DVD For Free by RIF
- Driver Reference

ElbyVCD.sys Thu Nov 28 05:43:49 2002 (3DE5F365)
- VirtualCloneCD Driver
- Driver Reference

SI3114r.sys Wed Oct 03 17:45:37 2007 (47040D81)
- Silicon Image driver
- Driver Reference

DRVMCDB.SYS Fri Jul 21 14:20:31 2006 (44C11AEF)
- Drive Letter Access Component of Roxio Drag-to-Disc
- Driver Reference

SiWinAcc.sys Thu Jun 14 20:02:27 2007 (4671D713)
- Silicon Image driver
- Driver Reference

PxHelp20.sys Mon Jul 24 20:18:21 2006 (44C5634D)
- Sonic CD/DVD driver (used by many different CD/DVD programs)
- Driver Reference

DLARTL_M.SYS Thu Feb 08 23:04:41 2007 (45CBF2D9)
- Shared Driver Component of Roxio Drag-to-Disc
- Driver Reference

DLACDBHM.SYS Thu Feb 08 23:05:12 2007 (... Read more

Read other 1 answers
RELEVANCY SCORE 119.2

Hi,

i got my notebook (MSI GE60) a month ago and since then i'm experiencing BSOD. It doesn't happen regularly. Sometimes it happens twice a day, sometimes nothing happens for 2 days .

Below i attached the dump files.

If any other info needed let me know.

A:BSOD: driver power state failure

two things, first Uninstall Daemon tools and then run this program:

Duplex secure

when you run the tool if the uninstall box is greyed out then your done If it is not then click it and let it uninstall. DO NOT click the install button It will install a Driver known to cause BSODs.

Second I notice that your video card driver (which is what the crash dumps are blaming as the problem) Is one of the drivers from the Dec 29 batch there are two things you can try, seeing if there is another update, I have heard tell that there is a beta driver that might solve the problem, or you can install an older driver and see if it fixes things. the drivers can be found here.

Read other 9 answers
RELEVANCY SCORE 119.2

Hi There,

Need some help, I am getting a driver power failure followed by a blue screen of death a reboot. Not sure what the problem is, can anyone provide some advice. I have tried to attached the minidump files but have not been able to.

Thanks in advance

A:Driver power state failure BSOD

Download BlueScreenView (in Zip file)No installation required.Unzip downloaded file and double click on BlueScreenView.exe file to run the program.When scanning is done, go Edit>Select All.Go File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.

Read other 10 answers
RELEVANCY SCORE 119.2

I got a BSOD earlier and the error was "DRIVER_STATE_POWER FAILURE. Requested files attached and I also found this info in my system logs:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa8007694060, 0xfffff800045e7748, 0xfffffa8008f9c680).

My system specs are available in my profile.

I hope I did everything correctly, and thanks in advance for the help!

A:Help With Driver State Power Failure BSOD

Hi GirlFriday and welcome to the forum.

Security App

Code:
avgrkx64.sys Fri Feb 8 09:14:05 2013 (51146D7D)
avgldx64.sys Fri Feb 8 09:14:24 2013 (51146D90)
avgloga.sys Fri Feb 8 09:14:29 2013 (51146D95)
avgidsha.sys Fri Feb 8 09:14:48 2013 (51146DA8)
avgmfx64.sys Fri Feb 8 09:14:48 2013 (51146DA8)
avgtdia.sys Thu Mar 21 07:50:47 2013 (514A6777)
avgidsdrivera.sys Fri Mar 29 07:40:56 2013 (5154F128)
avgtpx64.sys Tue May 7 18:38:19 2013 (5188F5BB)
Crashes indicate AVG being a possible cause. Remove AVG and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software. Microsoft Security Essentials and Malwarebytes are recommended from a strict BSOD perspective. They do not cause blue screens on the system as other AV products do.

Microsoft Security Essentials, Free antivirus for windows and Malwarebytes Anti-Malware Free



   Information
Do not start the free trial of MalwareBytes, unselect that option when prompted.


Update and make full scans with both separately.


Start up

Keep less stuff at the start-up. Only anti-virus, this helps avoid driver conflicts and improves time to log in to windows.
Troubleshoot a Problem by Performing a Clean Startup in Windows 7 or Vista
How to Change, Add, or Remove Startup Programs in Wind... Read more

Read other 9 answers
RELEVANCY SCORE 119.2

Hi,
I'm using a Asus UX32ln.
I've been having getting this BSOD for a while. However, I noticed that it only occurs some time (maybe 15-30mins) after i run an application using the dedicated GPU (Nvidia Geforce 840m). If only the integrated graphic card is used, it runs fine.
Thanks.

A:driver power state failure BSOD

Hi weishou,

Welcome to the 8forums.
Unfortunately your attached zip file is empty.
Please try to upload the zip file again.
Please check the minidump folder for dump files: {windows partition}\Windows\Minidump.

Read other 13 answers
RELEVANCY SCORE 119.2

Hi,

Im having bsod driver power state failure on my brand new Asus N551JX. It happens after opening the lid without being plugged in.
Here is the minidump:
071515-27015-01.dmp :: Free File Hosting - File Dropper: File Host for Mp3, Videos, Music, Documents.

A:BSOD Driver Power State Failure

I think it might be a problem with the graphic card (gtx950m) driver

Thanks for your help

Read other 10 answers
RELEVANCY SCORE 119.2

My brand new HP Envy computer already got this blue screen [driver power state failure was all I was able to read].
Got scared! Rebooted, it was hard to get the wifi connection back, but I did. Rebooted again, just to make sure, and it takes much longer time for it now, to come back to life.

I might add I wasn't doing anything at all when it happened ... just woke it up from sleeping.

[I'm a rather unexperienced user ]

A:Already BSOD - driver power state failure

Hi,
I am extremely sorry that this thread was not attended to. There are not many people in this field.
In case you still require help, kindly respond to this thread and I will be notified via email and you should expect a response from me in 48 hours.
Regards,
Pranav

Read other 1 answers
RELEVANCY SCORE 119.2

Hey, I have been experiencing the BSOD for around 1-2 months now, its not that frequent but when it happens it consistently happens throughout the day, also after it relaunches the sound it all messed up and crackly. Im currently using the Alienware M17x which i heard it is quite common on, Any help would be greatly appreciated.

dump files in attachment


(Great my dump files are 9.37mb what can i do?)

A:BSOD - Driver state power failure

Not a clue what to do now, just found out my dump files are 9.37 MB which is over the limit you can put on here, any suggestions?

Read other 2 answers
RELEVANCY SCORE 119.2

I have windows 8 installed on my home computer. The computer keeps shutting down on it's own and saying "Driver Power State Failure". Can someone look at my BSOD Minidumpfiles and give me an idea of what could be causing this problem. I have tried to save the minidump files into a zip file, but it brings up an error not allowing me to do this. Hopefully the text file from Blue Screen view is enough to figure this out. Thanks. 
==================================================
Dump File : 021413-31262-01.dmp
Crash Time : 2/14/2013 11:00:19 AM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : fffffa80`1c00e600
Parameter 3 : fffff800`49f58920
Parameter 4 : fffffa80`1b38fa00
Caused By Driver : atapi.sys
Caused By Address : atapi.sys+3474
File Description : 
Product Name : 
Company : 
File Version : 
Processor : x64
Crash Address : ntoskrnl.exe+7a040
Stack Address 1 : 
Stack Address 2 : 
Stack Address 3 : 
Computer Name : 
Full Path : C:\Windows\Minidump\021413-31262-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 9200
Dump File Size : 905,408
Dump File : 021313-22042-01.dmp
Crash Time : 2/13/2013 8:27:48 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00... Read more

A:BSOD - Driver Power State Failure

Hello cap2587,  I'm afraid that BlueScreenView is not very helpful.  If we could gather a little more information about the problem computer, it might prove beneficial in pointing toward a solution.1. )  Please follow this link:  BSOD Posting Instructions Windows 8 - Windows 7 - Vista.Follow all instructions with the exception of:Create a new thread HERE and attach the file(s) after step 4Note: Both files of Step 1 need to be in the Documents folder.Next, Upload the zipped folder to a File Sharing website of your choosing because Bleeping Computer has a 512 K only upload limit and this file will be much larger.   For a listing of free File Sharing websites see: http://technojourney.com/trending/best-alternatives-megaupload-and-filesonic-file-hosting/or you may use File Dropper or Box.com.Please post a link to the file in your next post.2. )  To help us get a better look at your computer's hardware, please download and install Speccy by Piriform. (mirror site)Run Speccy and from the top menu, select File --> Publish Snapshot.  Click "Yes" to proceed.Click, Copy to Clipboard and  paste this address into your next post.Below is ONLY for those who can not get online when running Speccy: Select File --> Save as Text File and save the file to your Desktop.Please copy the text file into your next post.Important Note: You will need to edit the text file to make sure that your Windows Key is not present under Operating System.3. )... Read more

Read other 10 answers
RELEVANCY SCORE 119.2

As the title says, I'm experiencing a Driver Power State Failure BSOD, I'll include informations gathered by the BSOD File Collection Script and Speccy below. I suspect my HDD might be the culprit but I'm not sure.
 
https://dl.dropboxusercontent.com/u/18557414/bsod/BSOD.zip

Edit: Mirror: http://www.mediafire.com/download/el91ery9g4t51na/BSOD.zip
Summary
Operating System
Windows 8 64-bit
CPU
Intel Core i7 3517U @ 1.90GHz 50 °C
Ivy Bridge 22nm Technology
RAM
4,00GB Single-Channel DDR3 @ 798MHz (11-11-11-28)
Motherboard
ASUSTeK COMPUTER INC. K56CM (SOCKET 0) 49 °C
Graphics
Generic PnP Monitor ([email protected])
Intel HD Graphics 4000 (ASUStek Computer Inc)
2048MB NVIDIA GeForce GT 635M (ASUStek Computer Inc) 44 °C
Hard Drives
466GB Hitachi HTS545050A7E380 (SATA) 35 °C
Optical Drives
HUAWEI Mass Storage USB Device
DTSOFT Virtual CdRom Device
MATbleepADVD-RAM
Audio
Realtek High Definition Audio
Operating System
Windows 8 64-bit
Computer type: Notebook
Installation Date: 17.11.2012 00:12:00
Serial Number: *****-*****-*****-*****-*****
Windows Security Center
User Account Control (UAC) Enabled
Notify level 2 - Default
Firewall Enabled
Windows Update
AutoUpdate Download Automatically and Install at Set Scheduled time
Schedule Frequency Every Day
Schedule Time
Windows Defender
Windows Defender Disabled
Antivirus
AVG AntiVirus Free Edition 2013
Antivirus Enabled
... Read more

A:Driver Power State Failure BSOD

to the Bleeping Computer forum.
 
 
Your issue seems to be probably caused by outdated storage controller driver.

BugCheck 9F, {3, fffffa800470c060, fffff88002f017f0, fffffa80046e8870}

*** WARNING: Unable to verify timestamp for iaStorA.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys
Probably caused by : iaStorA.sys
Please try the below steps.
 
Update Chipset driver.
 
1. If there is Intel Rapid Storage Technology driver installed in your system, please uninstall it completely first.
 
2. Download and install latest chipset driver from the below link.
 
    https://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/20775/eng/infinst_autol.exe&lang=eng&Dwnldid=20775
 
Change power power plan to high performance.
 
Please read the excellent guide from below link and make sure power plan is set to "High performance". 
 
http://www.eightforums.com/tutorials/5464-power-plan-settings-change-windows-8-a.html
 
This will prevent core system components to enter in to power saving mode. Extreme power saving options are meant for portable computers and absolutely not necessary in a desktop machine.

Read other 5 answers
RELEVANCY SCORE 119.2

info taken from Speccy.


Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 2500K @ 3.30GHz 41 ?C
Sandy Bridge 32nm Technology
RAM
8.00 GB Dual-Channel DDR3 @ 824MHz (8-8-8-24)
Motherboard
ASUSTeK Computer INC. P8Z68-V PRO (LGA1155) 60 ?C
Graphics
BenQ G2420HD ([email protected])
1280MB GeForce GTX 570 (ASUStek Computer Inc) 36 ?C
Hard Drives
125GB M4-CT128 M4SSD2 SCSI Disk Device (SATA-SSD)
977GB Western Digital WDC WD10 02FAEX-00Z3A0 SCSI Disk Device (SATA) 39 ?C
Optical Drives
ASUS DRW-24B3ST ATA Device
ELBY CLONEDRIVE SCSI CdRom Device
Audio
Realtek High Definition Audio

Power
Corsair HX 650 professional series (650 Watt)

home built PC my brother and I made it first time home build. My brothers PC is identical except for his case, and he hasn't had any problems

My computer Randomly blue screens with DRIVER STATE POWER FAILURE, but it doesn't create a minidump in my windows folder.

I tried running verifier but it seemed like nothing happened I followed all the steps but after reboot windows just started up normally like nothing happened, I ran a query and it a command prompt popped up for 1 second then disappeared before i could read anything.

I looked at your thread on forcing a mini dump, but unfortunately i got a bit confused by the lingo and gave up ...

I really appreciate any help as It's incredibly frustrating not knowing why my new shiny powerful computer is crashing.

i've attached t... Read more

A:Driver Power State Failure BSOD

Verifier won't necessarily pop up a BSOD immediately on reboot - it depends on what the offending driver is doing as to when it'll BSOD.

First off, here's the info that I have on SSD's:

Quote:




There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard)
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to swtich controllers also.-
Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with your system.
It's my opinion that SSD's aren't reliable enough (with current hardware) to be used on a system that needs to work reliably. Until I see reliability I will not recommend, nor will I use, SSD's for critical applications.
06 Dec 2011 - This post tends to confirm... Read more

Read other 5 answers
RELEVANCY SCORE 119.2

Hello
I recently have some BSOD's wich lead in reinstalling windows completly,

They when i shutdown my computer, shutting down the computer takes ages, wich lead in BSOD with i think this mssg, the computer didn't make a minidump but did create the folder.

When the computer restarts i can enter my password and then i have just a black screen with a mouse cursor.

also when i use taskmanager to startup devicemanager it doesn't show any exclamation marks in the list.

i have this computer for about 4 months now. just added the new monitor Samsung xl2370 to my setup (currently my second screen is at samsung repair center for RMA, but it's a p2370)

Is there someone who experienced the same problem here or does someone have the solution i would be glad to hear about that,

i didn't reinstall the computer yet the last time it happend. so i can search for something you might need for helping me to get a solution. is

Also my PC setup is entered, and exactly what i have in there. The memory is listed in the compatible list of ASUS. (KHX1600C9D3/6GX)

Let me know when more information is needed. mean while i'm trying to get the BSOD again with my camara pointed at my screen.

Also i can't generate the file with the perfmon /report command. it shows that it can't acces the destination file.

this is the second time i have this problem the second time was 2 days after the complete reinstall.

The number of processes that are listed is: 24
And almost all the service's that are listed ... Read more

A:BSOD Driver power state failure

  
Quote: Originally Posted by Sabertooth


Hello
I recently have some BSOD's wich lead in reinstalling windows completly,

They when i shutdown my computer, shutting down the computer takes ages, wich lead in BSOD with i think this mssg, the computer didn't make a minidump but did create the folder.

When the computer restarts i can enter my password and then i have just a black screen with a mouse cursor, when i task manager (ctrl+shift+esc) i can walk trough the folders to the minidump folder. but it shows up empty, I can't insert a usb stick in the computer nor can i use network capability's

also when i use taskmanager to startup devicemanager it doesn't show any exclamation marks in the list.

i have this computer for about 4 months now. just added the new monitor Samsung xl2370 to my setup (currently my second screen is at samsung repair center for RMA, but it's a p2370)

Is there someone who experienced the same problem here or does someone have the solution i would be glad to hear about that,

i didn't reinstall the computer yet the last time it happend. so i can search for something you might need for helping me to get a solution. is

Also my PC setup is entered, and exactly what i have in there. The memory is listed in the compatible list of ASUS. (KHX1600C9D3/6GX)

Let me know when more information is needed. mean while i'm trying to get the BSOD again with my camara pointed at my screen.

Also i can't generate the file wi... Read more

Read other 5 answers