Over 1 million tech questions and answers.

My ethernet is working but internet isn't

Q: My ethernet is working but internet isn't

Hi, so basically I am using a windows 7 computer, and my WiFi doesn't seem to be working. To be exact, my Ethernet cable is working but my wireless isn't... before (a few days ago) it seemed to be working when I restart my computer, or just simply restart my router. But now, when I've tried it about 10 times, the WiFi is still not working :/

Thanks for the help

RELEVANCY SCORE 200
Preferred Solution: My ethernet is working but internet isn't

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: My ethernet is working but internet isn't

What is this computers make and model?

Read other 4 answers
RELEVANCY SCORE 56.4

Hi,

I have a linksys model wrt54gl v1.1 and I am using Windows Vista 32bit Home Edition. I have a pc connected to the router directly through an ethernet plus a laptop, 2 iphones and a blackberry that get wireless internet from it. 2 days ago wireless stopped working. The internet on the pc connected to the router by ethernet is still working and the power, WLAN, ethernet, and internet lights are all lit green. The internet and ethernet lights flash when data is being transferred but the the WLAN light is not flashing. I have restored the router to factory default but it is still not working. The phones and laptop are not detecting any wireless network present. Hope you can help.

Paul
 

A:Internet working on PC connected to router by ethernet but wireless not working

I have restored the router to factory default but it is still not working.Click to expand...

The only other thing to try is to unplug the router for a few hours. You could also try another factory reset.
 

Read other 1 answers
RELEVANCY SCORE 54

The other day I woke up and found windows 10 installed on my PC, it installed itself overnight without permission. I was confused and reverted back to windows 7 immediately (not that I have anything against windows 10, just I was happy with how my pc was running before).

Now the internet doesn't work, I've tried the troubleshooter and eventually it comes up with "Local Area Connection doesn't have a valid IP configuration". It's set to obtain IP and DNS automatically in my connection properties.

I've tried all the basic things like turning router off for 10+ seconds, restarting computer and replugging in all the ethernet cables on the switch box and router. The internet is working fine on every other device in the house, wireless and wired. It was working fine until the upgrade and rollback from windows 10, which is why I put this thread in windows 7 support instead of networking support.. but maybe it belongs there I'm not sure.

Here's what I get from ipconfig /all in cmd:


Windows IP Configuration

Host Name . . . . . . . . . . . . : Tom-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Ethernet Connection I217-V
Physical Address. . . . . . . . . : E0-3F-49-AD-82-03
DHCP Ena... Read more

A:Internet not working (Ethernet)

I would start by deleting the Intel network adapter from device manager and deleting any associated drivers. Then reboot.


Download the updated driver for Windows 7 here if Windows doesn't load one on reboot:
https://downloadcenter.intel.com/dow...for-Windows-7-

Read other 1 answers
RELEVANCY SCORE 54

The other day I woke up and found windows 10 installed on my PC, it installed itself overnight without permission. I was confused and reverted back to windows 7 immediately (not that I have anything against windows 10, just I was happy with how my pc was running before).

Now the internet doesn't work, I've tried the troubleshooter and eventually it comes up with "Local Area Connection doesn't have a valid IP configuration". It's set to obtain IP and DNS automatically in my connection properties.

I've tried all the basic things like turning router off for 10+ seconds, restarting computer and replugging in all the ethernet cables on the switch box and router. The internet is working fine on every other device in the house, wireless and wired. It was working fine until the upgrade and rollback from windows 10, which is why I put this thread in windows 7 support instead of networking support.. but maybe it belongs there I'm not sure.

Here's what I get from ipconfig /all in cmd:


Windows IP Configuration

Host Name . . . . . . . . . . . . : Tom-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Ethernet Connection I217-V
Physical Address. . . . . . . . . : E0-3F-49-AD-82-03
DHCP Ena... Read more

Read other answers
RELEVANCY SCORE 53.6

So I have an HP Pavillion dv9000 laptop with window 8 installed and when I try to connect to the internet I keep getting an error that says the "Ethernet" Adapter is not working properly. I used to be able to go on the internet and then my dad had my computer for a while and now it's not working. Can anyone help me with this problem?
 

A:HP Ethernet Adapter not working no internet

Read other 9 answers
RELEVANCY SCORE 53.6

Hi,

For about 4 years I have had the ability at my work place to access the LAN from my desktop via an Ethernet connection and at the same time access the internet via Wifi to a router+DSL connection. I just switched to Fios which means a new router.

Now for some reason I cannot have both connections functioning at the same time.
When they are both running:
-I cannot access internet (Wifi connects just fine, strong signal, etc... but browser can't find any addresses). If I unplug the Ethernet/LAN cable, the browser - internet access is fine.
-I cannot print to a LAN network printer, though I can still access the server on the LAN and run programs that are located on the server. If I disable the Wifi, I can print to a network printer fine.

I really need to be able to do both again. E.g when I am away, my desktop will need to be connected to the internet so I can connect to it via Logmein and access files/programs on the server.

Here is a printout of "ipconfig /all" from my desktop:

Windows IP Configuration


Host Name . . . . . . . . . . . . : DOCTOR
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : home


Ethernet adapter Local Area Connection:


Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VIA Rhine II Fast Ethernet Adapter#2
Physical Address. . . . . . . . .... Read more

A:LAN ethernet and Wifi internet not working together now

More information:
OS on my desktop: XP Home SP3
OS on computer connected to router that is Wifi source for my desktop (internet access) - XP Home SP3
OS on server (LAN, ethernet) - XP Pro SP3

ipconfig /all for computer connected to router (internet access)

Windows IP Configuration

Host Name . . . . . . . . . . . . : AESCA

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Hybrid

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No

DNS Suffix Search List. . . . . . : home
Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : home

Description . . . . . . . . . . . : Intel(R) PRO/100 VE Network Connection

Physical Address. . . . . . . . . : 00-07-E9-73-57-FA

Dhcp Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

IP Address. . . . . . . . . . . . : 192.168.1.103

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.1

DHCP Server . . . . . . . . . . . : 192.168.1.1

DNS Servers . . . . . . . . . . . : 192.168.1.1

Lease Obtained. . . . . . . . . . : Thursday, August 08, 2013 11:10:26 AM

Lease Expires . . . . . . . . . . : Friday, August 09, 2013 11:10:26 AM

ipconfig /all for the server (connects to my desktop via Ethernet cable)

Windows IP Configuration

Host Name . . . . . . . . . . . . : SERVER

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Unknown

... Read more

Read other 3 answers
RELEVANCY SCORE 52.8

As mentioned in the title, my internet is working fine. spent some time onthe phone with my service provider and he said everything is fine and suggested i plug into another computer and sure enough it works without issue. So everything using wifi works but my desktop will not connect with the ethernet cable.
I just get issues saying problems with dns server.

Attached is the ipconfig /all as it seems to be the first thing asked for from other post i have been reading through.
any help would be greatly appreciated as i would rather not go to the extreme of reformatting.

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\jeremy>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : jeremy-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : cgocable.net

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : cgocable.net
Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connecti
on
Physical Address. . . . . . . . . : 00-21-9B-1E-C8-67
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::3cce:6abb:1ef6:fcea%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained... Read more

A:Internet working fine but no connection through ethernet

Read other 6 answers
RELEVANCY SCORE 52.8

Hello all,
I started college about 8 weeks ago and for the first 6 weeks I was able to use ethernet and all was good. Suddenly, it stopped working and I cant connect with it anymore and the wireless here is awful. I have an Acer Aspire X1200 with Vista using a Netgear WG111V3 wireless adapter and NVIDIA nForce 10/100/1000 Networking Controller. Any ideas? I have no idea what to do.

Thanks,
Josh
 

A:Can't connect to internet using ethernet anymore....was working then just sto

Have you checked to make sure it is not a defective cable?

To what are you trying to connect (router, an ethernet jack supplied by the college, etc.)?

Does the ethernet LED light when you connect the cable to your computer?

Try these repairs.

(From a JohnWill post)

TCP/IP stack repair options for use with Vista or 7.

Start, Programs\Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log

Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log

Reboot the machine.
If still can't connect try to connect by ethernet and show ...

Start, Run, CMD, OK to open a command prompt:
(For Vista or 7 type CMD in the Search box after Start)

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 1 answers
RELEVANCY SCORE 52.8

I recently bought a new ACER laptop and I connect to the internet with a Ethernet cable and at specifically 1am I completely lose internet connection. When I open up my browser it's say it has timed out or something. But when I use my other devices such as my iPad and phone on the wifi it works fine. Any help would be great, thanks.

A:Internet stops working at specifically 1am (Ethernet)

There are time limit setting in the router and family safty setting in control panel

I would try resetting the router first and make sure you are logged in with an admin accout

Read other 4 answers
RELEVANCY SCORE 52.8

just yesterday everything was working fine then i got disconnected from the internet i checked through ethenet I was able to connect but when i plugged in the cable to wifi router it did not connect to the internet.
help.
 

A:My internet is working on ethernet cable but not on wireless

Read other 16 answers
RELEVANCY SCORE 52.8

Hi. I removed the Ethernet cord on my computer while it was still on( I have Vista) and i plugged it back in a while ago, and it didn't sense any Internet connection. The wireless on the laptops and the Ethernet on my other desktop is working fine, but just one computer isn't connected to the Internet. My friend who fixes computers had me open up command prompt and"ping" stuff, and it said that the connection was fine, but my browser and Songbird can't open any web pages. Ever since the Internet has been off on the computer, it's been freezing up like crazy.
Do you think i have a virus? Or is it the Ethernet port that's damaged? Help!
 

A:Removed Ethernet Cord, now Internet isn't working at all.

Read other 10 answers
RELEVANCY SCORE 52.8

os:xp shows connected but browser not working

firewall off
driver installed
dont kknow what the heck it is.....anything will help ty!!
 

A:ethernet connection good...internet not working

Need quite a bit more info,before any suggestions can be made.

The “Johnwill” need to know about your environment questionnaire:

Please supply the following info, exact make and models of the equipment please.

What country are you located in.
Name of your ISP (Internet Service Provider).
What is the expected Upstream/Downstream speed for your ISP Connection?
Make and exact model of the broadband modem.
Make and exact model and hardware version of the router (if a separate unit).
Model numbers can usually be obtained from the label on the device.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Make and model of your computer.
Version and patch level of Windows on all affected machines, i.e. XP-Home (or XP-Pro), SP1-SP2, Vista, etc.
The Internet Browser in use, IE, Firefox, Opera, etc.


Please give an exact description of your problem symptoms, including the exact text of any error messages.

If you're using a wireless connection, have you tried a direct connection with a cable to see if that changes the symptoms? Have you disabled all encryption on the router to see if you can connect that way? Have you connected directly to the broadband modem to see if this is a router or modem/ISP issue?

If there are other computers on the same network, are they experiencing the same issue, or do they function normally?


On any affected computer, I'd also like to see this:

Hold the Windows key and press R, ... Read more

Read other 3 answers
RELEVANCY SCORE 52.4

Hello all,
I started college about 8 weeks ago and for the first 6 weeks I was able to use ethernet and all was good. Suddenly, it stopped working and I cant connect with it anymore and the wireless here is awful. I have an Acer Aspire X1200 with Vista using a Netgear WG111V3 wireless adapter and NVIDIA nForce 10/100/1000 Networking Controller. Any ideas? I have no idea what to do.

Thanks,
Josh
 

A:Can't connect to internet using ethernet anymore....was working then just stopped

Read other 9 answers
RELEVANCY SCORE 52.4

Hello,
My gaming tower is showing no network connection and I cannot connect to the internet at all. I have tested my ethernet wires and internet connection on my laptop, they are working fine. My lights in my ethernet plugin are not coming on at all on the towerr. I read that by using the CMD prompt and typing ping 127.1.1.1 would give you an idea if you ethernet port was dead if it gave no response. Mine responded with:

Pinging 127.1.1.1 with 32 bytes of data:
Reply from 127.1.1.1: bytes=32 time<1ms TTL=128
Reply from 127.1.1.1: bytes=32 time<1ms TTL=128
Reply from 127.1.1.1: bytes=32 time<1ms TTL=128
Reply from 127.1.1.1: bytes=32 time<1ms TTL=128

Ping Statistics for 127.1.1.1:
Packets : Sent = 4, Received = 4, Lost = 0 <0% loss),
Approximate round trip in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average =0ms

My gf said that the power flickered a couple of times today. I have everything plugged in to a surge protectors but I am honestly at a complete loss at what to do. Any help is appreciated greatly.


Thanks

A:No Internet Connection/Ethernet Port Lights are not working

Well; even with surge protectors; it is possible the ethernet card took a minor hit. But one thing you could try is to completely uninstall the ethernet adapter from the device manager, reboot, and let windows re-detect it and reinstall the drivers for it; that way hopefully there will be a fresh install of the adapter. Give that a shot and see what happens.

Read other 3 answers
RELEVANCY SCORE 52.4

so i have a computer im working on for a friend and they want 98 on it for some program they are running.
Anyway here it is dell optiplex gx150 windows 98 512 mb ram i cant get any Ethernet drivers to work in the device manager i have the yellow question mark beside pci ethernet controller no drivers i load will work been looking for days now tried like 20 different drivers.
 

A:Can't get internet working on windows 98 cant find ethernet controlers

Here you go: http://ftp.us.dell.com/network/R41703.EXE

 

Read other 12 answers
RELEVANCY SCORE 52.4

When I try and access the internet through any of the main browsers (I.e. Internet Explorer, Google Chrome, Firefox and Safari) they tell me along the lines of 'unable to access the network' and 'this page can't be displayed' after taking a while attempting to load. I also cannot access it through any of my Windows 8 apps. I know it's not an issue with the home broadband itself and is something to do with my laptop as it is running fine both wirelessly and through using an Ethernet cable on all other devices. I would really appreciate some help with trying to fix this asap as I have spent a lot of time researching this issue and trying most things to resolve it without success, I also need to use the internet for loads of coursework over the summer hols and cannot afford to be taking it to a pricey IT technician. Please helppp
 

A:My laptop cannot connect to the internet, even though wireless and ethernet are working

Take a look at the file
\windows\system32\drivers\etc\hosts​there MUST be at least a line reading 127.0.0.1 LOCALHOST
but the question is there anything other than comments in it?
If so, leave the comments and the localhost line and delete everything else.

If you modify the hosts file, then you also need to

ipconfig /flushdns
net stop "dns client"
net start "dns client"

 

Read other 39 answers
RELEVANCY SCORE 52.4

Hello!
I'm having problems with my Asus NV56VM laptop (windows 8). Whenever I try to use an ethernet cable to access internet I either get a SSL-error, the website doesn't load at all or it loads VERY slowly and not the whole website (it says that I have internet acces and that it's not limited). Wireless works fine though.
I've also tested playing some games (ex Call of duty) and it works fine for like five minutes and then I get an error message saying something about packages didn't receive correctly. So I'm guessing it have to do with not all information is transfered when I use ethernet.
According to the Device Manager I use "Qualcomm Atheros AR8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)" and the drivers is up to date.

Things I've tried:
Using a different ethernet cableTesting it on a different network (at my friends house)Reinstalling drivers (both from Asus website and from Qualcomm's)Disable wirelessEmpty cache/cookiesRestarting computer/router/modemTurning off firewallSearching for virus (didn't find any)Ipconfig /release /renewTested it on different browsers (I also affects games though)Formating my laptopSSL and TSL is enable

I'm not that great with computers so sorry if I'm not so clear with everything and if there is something I've missed please let me know.

Would appriciate some help on this!

A:Internet not working with ethernet cable (Atheros AR8161)

This looks like a physical issue with your connector not picking up all 8 pins on the head rather than a setting problem since you have completed most troubleshooting techniques. If this is the case you may have to invest into another internal or external ethernet adapter.

Could you please complete the following command in command prompt and after 1-2 minutes terminate it with the following keys CTRL+C. Once done please post back your results


Code:
ping www.google.com -t



   Note
The command needs to be typed exactly as seen above including any spaces. Feel free to copy and paste if it is easier

Many Thanks,
Josh!

Read other 11 answers
RELEVANCY SCORE 52

Hello,

Yesterday, my internet through wireless stopped working all of a sudden. It was working good till I closed my pc and went out for a few hours. When I returned and tried to access, it simply does not connect. I get an error saying "Windows was unable to connect to abcd (router name)". I tried to plug it into the router through ethernet and it works perfectly.

I have tried to uninstall the wireless adapter and the lan adapter as well. I have tried it in safe mode. I have tried to delete the network also but now that left me with inputting the password everytime I want to connect.

I am living in a student accomodation with 6 more people and all of them's is working good. I am using Windows 7 Ultimate Edition on Dell Studio 1555. The router is a Netgear one for the Virgin Media Superhub.

Thanks a lot
 

A:Internet Access through ethernet works but wireless stopped working.

Read other 16 answers
RELEVANCY SCORE 52

Hi there,

The laptop I have is an asus P550C, windows 7.

This laptop came pre-installed with Mcafee Antivirus protection for a limited amount of time. Wifi was working perfectly fine although there were occasions where the connection would disconnect by itself. After the free-trial ended, I did not want to buy the packaged they were advertising so I went to my Control Panel and uninstalled Mcafee. This was when the problem started to occur. The internet access icon had a red x and when I went to diagnose the problem, it said that I needed to connect via an ethernet cable. Since then, I have connected it with an ethernet and internet works and I have also installed AVG's free antivirus software.

I have tried to
type: ipconfig /flushdns
type: nbtstat -R
type: netsh int reset all
type: netsh int ip reset
type: netsh winsock reset

But I still cannot connect via wifi. Please help
 

A:Wifi has stopped working but still able to connect to internet via ethernet cable

C:\Users\jay>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : jay-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : vlan1.phub.net.cable.rogers.com

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 54-35-30-05-36-68
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : vlan1.phub.net.cable.rogers.com
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : BC-EE-7B-28-57-D7
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::9dfa:dcc6:3d3b:ae86%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.20(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : March-27-15 4:14:52 PM
Lease Expires . . . . . . . . . . : March-28-15 4:14:52 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . :... Read more

Read other 1 answers
RELEVANCY SCORE 51.2

Hi guys,

I've been researching and trying to days to get this to work with no avail so I decided to post here for some help as I see this community is really active.

We've got 4 different laptops here and none of them can connect to the wifi anymore (it suddenly stopped working for the last whole week). We can connect to the internet through ethernet cables though. We only use one at a time (if ethernet, then wireless is disabled and vice versa).

Here is a copy of the ipconfig/all:
Windows IP Configuration

Host Name . . . . . . . . . . . . : PeterMai-HP
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : moolahd.local

Ethernet adapter Local Area Connection 2:

Connection-specific DNS Suffix . : moolahd.local
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : AC-16-2D-4B-ED-F2
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::ac08:5a6d:b124:582%14(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.100.163(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Monday, 14 October 2013 2:42:55 PM
Lease Expires . . . . . . . . . . : Tuesday, 15 October 2013 2:47:55 PM
Default Gateway . . . . . . . . . :... Read more

A:Internet only working when connected using Ethernet cable. Wifi doesn't work

You have an IP on your LAN, but none on your wifi. Check your router to make sure DHCP for wifi is turned on and you have enough available addresses.
 

Read other 22 answers
RELEVANCY SCORE 51.2

Hey there,

Have been having this problem for a while. I'll try to make a long story short. I'm on a personal build computer running x58 chipset. Originally installed Windows 7. Have upgraded to 8, 8.1, 10, and then 10 anniversary addition.

The problems started once I upgraded to Windows 10.

When the computer goes idle for the day (leave for work, come home later in the day) the desktop, which is connected via ethernet, has lost it's connection and will only come back after a reboot. Troubleshooting doesn't work, and trying to disable and re-enable the NIC card doesn't work.

Once the desktop loses its connection, every device that is connected via wifi will show that it is connected, but will not load anything. As soon as I reboot the desktop, everything works fine. I DO NOT need to reboot the modem or router.

I have searched over and over and over, and have determined it is not a modem problem(comcast eMTA, in bridge mode), or a router problem (Asus RT-AC68P) so it must be a driver problem for my NIC card. I cannot for the life of me find a Marvell Yukon 88E8056 windows 10 supported driver to see if that is the issue. Maybe there are settings in the NIC card properties I need to change?

Any help would be appreciated.

Read other answers
RELEVANCY SCORE 47.2

So a couples of days ago my computer lost connection a few times, but it got back up running without any problems, yesterday however I had huge problems browsing trough the internet and had problems connecting to pages several times, but downloading worked just fine, but today I'm not able to do anything, it keeps disconnecting and reconnecting, but when its connected the connection is so bad that I can't access a single site.
I know it must be something wrong with my computer, because I've tested two different cables in two different ports, and I know one of the cables must work since I have no problems connecting to the internet on my Xbox 360, and all the other computers in the house have no internet problems what so ever, including the wireless connection on my laptop, and I also run into the same connection problem even in safe mode.
I noticed that the light on my ethernet port is solid orange, but usually it is green, and I've tried to do a virus scan to check if that might be the problem, but I doubt it since I haven't accessed any pages I don't usually visit in a while and it didn't find any viruses.
I have had some problems with the ethernet port before, but nothing that was permanent, I have experienced that my computer has had connection problems while everyone else in the house have had no problems, but after waiting a bit it suddenly reconnects and has worked just fine for many many months, and I've only experienced this pr... Read more

A:I think my ethernet port is broken, might need internet/ethernet card.

Read other 16 answers
RELEVANCY SCORE 47.2

I have been using a 50ft ethernet cable until I got a 100ft cable for internet because wifi in my room sucks. The 50ft worked great but as soon as I set up my 100ft it doesn't work. At first I thought a faulty cable but when I pull up "local area connection status" it seems to be working fine. I cannot load a single webpage but my computer says there is "internet access". Is it a faulty cable or is there something wrong with my settings?

Windows 7 Home Premuim
64 bit
Wireless card: d-link DWA=566 wireless N 300 Dual Band PCIe Desktop adapter

I've attached a screenshot with all my network windows open for reference.

Here is the info from ipconfig:

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Michael>ipconfig

Windows IP Configuration
Wireless LAN adapter Wireless Network Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Ethernet adapter Local Area Connection* 9:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::35a9:d201:9f11:3889%12
IPv4 Address. . . . . . . . . . . : 192.168.0.26
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . ... Read more

A:Solved: Ethernet connection not working but shows "internet access"

You have two ethernet adapters, right? Are you using the same one now as you did with the 50' cable? If so, don't know why it would make a difference, but try the previously used port.
 

Read other 3 answers
RELEVANCY SCORE 46.4

Been having issue for more than a year. When my provider (Charter cable with static ip) drops my internet connection I have to start "at the wall" meaning reboot cable modem then wireless router then reboot laptop to reconnect to internet. Takes 1/2 hour. Charter seems to be dropping internet more and more so this can happen once per week or sometimes every day or 3. Have narrowed it down to this. With internet working just fine. Can use wireless from phone to surf web. Can even enable wireless adapter on laptop and connect to internet via wireless. So internet is not the issue. I very seldom use wireless and instead use my ethernet connection. I keep wireless adapter disabled. Very simply, internet is working. I am using ethernet connection. All is good. Simply unplug ethernet cable from laptop then reconnect ethernet cable. I have no internet until I reboot my laptop. Reboot works fine but getting tired of having to do so every time Charter drops my internet. John

Read other answers
RELEVANCY SCORE 43.2

Hi

My Ethernet started malfunctioning recently. My Notebook PC works fine with Ethernet connection at my workplace but recently started malfunctioning at home. The wifi connection is still in order both at home and at my workplace. My PC is Windows 10, i7 processor.

Can you advise how to solve the problem?

Thanks
 

Read other answers
RELEVANCY SCORE 41.6

Hello Guys,

I've been searching for the past 2 days a solution, but nothing came up to work. Tried different things, nothing good yet.

So I'm directly connected to a modem, cable, and well, my computer takes time to identify and then identifies it first a a public network (i was able to change it to home). ipv6 no internet access, ipv4 no network access.

Here's my ipconfig log :
Code:
Windows IP Configuration

Host Name . . . . . . . . . . . . : TheRealThing-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : flets-east.jp
iptvf.jp

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : flets-east.jp
Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet
Physical Address. . . . . . . . . : 20-6A-8A-15-AF-E8
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2408:210:82a1:9300:21bb:17de:75f8:e7eb(Pr
eferred)
Temporary IPv6 Address. . . . . . : 2408:210:82a1:9300:d457:7a9d:f912:561(Pre
ferred)
Link-local IPv6 Address . . . . . : fe80::21bb:17de:75f8:e7eb%11(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.231.235(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . .... Read more

A:Win 7 - can't have internet access cable ethernet from modem ipv6 no internet ipv4 no

Read other 6 answers
RELEVANCY SCORE 41.6

My wireless is not working. I have tried looking at comments on line but nothing seems to work!
If I use the CMD code I get this for the ether net:
ipv4: 94.205.214.13
subnet: 255.255.255.0
Default gateway: 94.205.214.1

I have a sitecom router if that helps at all? It says to go to 192.168.0.1 which I have done but sdtill confused!Thanks in advance
 

A:Wireless not working, ethernet is working

All the above looks good. Using 192.168.0.1 as a URL in your browser, you should get a request for the user/password for that router. Once you login, you can go to the WiFi portion, enable it, set the SSID and encryption you desire.

Where do you get stuck?
 

Read other 4 answers
RELEVANCY SCORE 40.8

Vista Ultimate 64-bit, ASUS Rampage Formula motherboard, USB mouse and keyboard connected in back ports.

Two things happened: Avira antivirus warned me of some threats which I either ignored or deleted. Windows Update had some updates ready (although I'm not sure if it updated).

I turned off my PC for a couple of hours, turned it back on and realized that my USB keyboard was not working on the password screen.

I eventually unplugged it from the back and plugged it into the front, where it worked. However, my USB mouse did not work when plugged into the second front port, nor did it work when plugged into the front port in which the keyboard worked.

I accessed System Restore using my keyboard and restored to one day previously. When it finished, both keyboard and mouse worked, although I got a pop-up message alerting me that the "drivers for your device could not be installed." When I clicked "OK," the mouse stopped working again.

I have checked BIOS and both mouse and keyboard are recognized, so it does not appear to be a hardware issue.
 

Read other answers
RELEVANCY SCORE 40.4

Hello. Ive ran into a problem which i pretty much caused myself, i tried to update my ethernet drivers in the device manager but i fatfingered it and pressed uninstall device (yup, clicked twice even to it warned since im dumb) Now that i tried to reinstall it, it just presents a yellow triangle with an exclamation mark on top of it. Ive scouted all over internet for a answer but so far nothing has worked. Anyone know how to fix this?
 

Read other answers
RELEVANCY SCORE 40.4

My ethernet connection seems to have suddenly crapped out which has left me using the USB port. But that means I cannot establish my home wireless network.

My ISP troubleshooting help line could not tell me anything beyond it being an ethernet problem.

Any help troubleshooting and re-establishing is much appreciated.
 

A:Ethernet not working...

"... ethernet connection seems to have suddenly crapped out" implies
1. bad ethernet adapter,
2. bad ethernet cable, or
3. bad something at the other end of the cable.

Can you try another cable?

Can you try something different at the other end of the cable (e.g., if it was a router, try a different LAN port)?

Can you try the same setup but with a different computer?
 

Read other 3 answers
RELEVANCY SCORE 40.4

My ethernet is not working but my wifi on the same computer is working(using wifi to post this). I attached an image of my resource monitor it shows me trying to download. The weird part is sometimes it goes up to my normal speed(32mb/s) for like 4 seconds and then it drops to not working at all and when I try to load a website I have to refresh a few times and pray.

I tried connecting the wire to my laptop (same wire and wall port) and it works fine. I ran malwarebytes and found one threat but the problem was not solved. I ran it again a few more time and it says I don't have anything else.

I have no idea what's (kinda computer noob) going on so any help would help.
Thanks
 

A:Ethernet is not working

You didn't provide any descriptions of your laptop and desktop and which Windows version they're running.

A wired ethernet connection is working okay in your laptop, but not in your desktop?

---------------------------------------------------------------
 

Read other 2 answers
RELEVANCY SCORE 40.4

Ok i just got a new brand router and I was trying to connect it thro lan to my PC which has a crappy wireless range, So I connect the cable and i get the massage "Network cable unplugged", However, I tried it on 2 other laptops and it worked great IBM(XP) HP(Vista).

-I own a HP Pavilion a6140.me. Just to let you all know that there is nothing wrong with the cable because it used to work great on our old router.
 

A:Ethernet not working.

Read other 6 answers
RELEVANCY SCORE 40.4

Hello, i have a desktop computer which used to get internet from a secondary router we had. It is a Jensen Scandinavia. One day when i logged onto my computer i noticed i had no internet, and it hasnt returned since that. It shows a yellow exclamition point by the internet icon, and says no internet Access. My secondary router Works fine With everything else than my computer, both wifi and Ethernet. Of all Electronics we have in the house, its only my computer who doesnt work. I have a cable that goes from my main router and to the secondary router, if i stretch that into my room it will allow me to get internet Access, so the problem isnt my main router. My Ethernet port on the computer is blinking green some times aswell, but i get no firm Connection. I also do not have a default Gateway.

Additional info: when my internet stopped working, i looked into my Device manager and found pseudo tunneling Interface With a yellow exclamition mark. I uninstalled it in hope that it would be reinstalled and making my computer work aagain, but it didnt get reinstalled ;(

Ty for the help, much appreciated.

A:Ethernet not working!

The Pseudo Tunneling Interface is for IPv6, which is not used currently for Internet Access. When you right click this yellow flag and Uninstall it , it should not come back.
If you have no other yellow flags in the Device Manager, then to test your internet connection, plug this computer directly into the Main Router rather then the secondary one.
Then follow these instructions Pre-posting Requirements - for both Wired and Wireless Connectivity Issues and paste your ipconfig log in your next post.

Read other 1 answers
RELEVANCY SCORE 40.4

Windows xp service pack 2
Athlon 64 3500+ 2.2 GHz CPU
2 x 1GB PC2700 DDRMSI K8T Neo2-F V2.0 Motherboard
100gb WESTERN DIGITAL HD
120 HD
ATI 512 x1950 pro
Hello

I have just got a phone plug in my room so I do not have to use my USB adaptor for my wireless broadband as it keeps losing the signal. I now have the router in my room using the Ethernet hole on my new MSI K8T Neo2-F V2.0 Motherboard, but every time I try and download a file it is corrupted. I have tried many different file just in case it was that. This did not work so I tried using my USB adopter and every thing downloads fine again. The driver for it is Realtek rtl8169/8110 family GIGABIT ETHERNET NIC and this is the web site for the motherboard nhttp://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3318077&CatId=15

Hope some one can help me with this.
 

A:Ethernet not working help

Read other 16 answers
RELEVANCY SCORE 40.4

I recently formatted my laptop and installed windows 7. In installing drivers, specifically network drivers, I installed the wrong drivers, realized deleted them and then installed the correct drivers, but now the ethernet port does not work. In device manager there is no little yellow alerts, I've scanned for hardware but nothing. Is there a way I can check the health of my ethernet port?

Please Help.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 2
RAM: 1908 Mb
Graphics Card: Intel(R) HD Graphics, 730 Mb
Hard Drives: C: Total - 165886 MB, Free - 125994 MB; D: Total - 119999 MB, Free - 71114 MB;
Motherboard: SAMSUNG ELECTRONICS CO., LTD., RV411/RV511/E3511/S3511/RV711
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

A:Ethernet Not Working

Read other 9 answers
RELEVANCY SCORE 40.4

I just had a technician come to my apartment today and install a wired connection to the router. However, my computer is still using Wi-fi, and it doesn't recognize a wired connection. My ethernet cable connects to an RJ45 port, where there is a cable running underneath the carpet to the router. I suspect that the ethernet cable running from my computer to the port might be faulty, but want to make sure there's nothing else wrong with it before I replace it.
 

Read other answers
RELEVANCY SCORE 40.4

All my Nvidia programs got uninstalled, and now my ethernet connection isnt working. I have a Wireless router and the rest of the comps on it have internet, but my comp is connected through a wire but is recieving nothing. please help
 

A:Ethernet not working

Do you have a nVidia chipset and/or an integrated ethernet adapter? Please put back the chipset drivers
 

Read other 1 answers
RELEVANCY SCORE 40.4

My motherboard is a msi n1996. Running windows xp professional 2002 service pack 2. I am hardwired for the internet thru comcast but my computer does not recognize my ethernet or PCI card. I've downloaded drivers for it (realtek 8101L driver) but it now tells me to turn off computer and install PCI card.?? I think my roommate went into the Bios and changed something because before he did i was able to connect thru the direct line. Please help me figure out why it isn't working. Any one ???
I am using wireless internet thru the neighbor temporarily. Thanks.

A:Ethernet PCI NIC not working

If windows is finding it, then the BIOS wouldn't have impacted it. I would buy a new network card, and try it. They are under 40 bucks. I recommend buying Intel.

Read other 2 answers
RELEVANCY SCORE 40.4

I have a Satellite 105A S361 System (Toshiba) The ethernet all of a sudden, does not work, I plug the cat5 in and neither the green nor the orange light flash, I've downloaded the new driver for it, and still nothing. What do I do?

A:Ethernet Not Working

Mike711, welcome to TSF.

The port sounds damaged, but have you tried a different ethernet cable? Sometimes the pins can become damaged, or the wiring can become loose.

Read other 1 answers
RELEVANCY SCORE 40.4

I'm having a very similar problem. I can connect wirelessly using my laptop to the internet through my netgear router, but not using my desktop. The desktop is plugged in directly to the router through the ethernet port, but the router light indicating a wired connection isn't lighting up. I've tried installing the router software on the desktop (running winXP), but the installation won't complete as it can't detect the router.

Device manager says that the adaptor is working properly, but the icon in systray says that a network cable is unplugged. I've tried 4 different cables, so I don't think they're to fault.

When I open the command prompt on my desktop and type ipconfig /all:

Ethernet adaptor local area connection:

media state: ...... media disconnected
description:...... SiS900 pci fast ethernet adaptor
physical address:... 00-14-85-6F-AE-05

Any help would be greatly appreciated.

P.s. When I plug my laptop in to the router using the ethernet cable, the router's light comes on, showing that it is connected.
 

A:Ethernet not working

Even though it appears you're having the same problem, please start a new thread when you have a new issue. It's very difficult to keep two problems straight and who's working on what in a single thread.

I've created a new thread for your issue here.

Thanks for your cooperation.
 

Read other 2 answers
RELEVANCY SCORE 40.4

I'm having problems with my ethernet. I don't think my computer is detecting my ethernet because my internet doesn't work when i try to connect with my ethernet. I think it stopped working after i recovered(where it deleted everything) my computer. So i'm hoping someone can help me fix it. Thanks
 

A:Ethernet not working.

Read other 15 answers
RELEVANCY SCORE 40.4

Im using eduroam internet that is provided on my campus.Im signed in  and logged with wifi on this network,but it seems i cant get it  work using ethernet cable.Every time it says Unindentefied network and that "ethernet doesnt have valid
ip configuration "when i run troubleshooter.
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig/all

Windows IP Configuration

   Host Name . . . . . . . . . . . . : JustOneRailgun
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : kampus.scst.hr

Ethernet adapter Ethernet:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Realtek USB FE Family Controller
   Physical Address. . . . . . . . . : 00-E0-4A-36-A9-4B
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::6865:5d54:8541:65eb%8(Preferred)
   Autoconfiguration IPv4 Address. . : 169.254.101.235(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   DHCPv6 IAID . . . . . . . . . . . : 134275146
... Read more

Read other answers
RELEVANCY SCORE 40.4

Hi there!

I have no experience at all with computers/connection issues, so apologies for my poor use of terminology.

I live in the Bay Area and I have xfinity/Comcast.

Around a week ago, I stopped being able to connect to Ethernet. After troubleshooting, I found that the error was "One or more network protocols are missing" or "Windows Sockets Empty".

I have already tried the following things:
1. Reset my computer / made sure all the cords were plugged in
2. Did a "netsh" in command prompt to reset my IP
3. Gave "Full Control" to everyone in folder 26 in my Registry Editor
4. Did a "netsh" to reset my winsocks
5. Disabled NETBIOS on both wifi/ethernet

I also couldn't find any new drivers...

Each time I tried one of these fixes, I would have ethernet for ~5 minutes after I restarted my computer. Afterwards, it would instantly disconnect me and connect me back to WiFi.
After I tried disabling WiFi, my ethernet connection would still dc, but I would simply have to troubleshoot it, and would work again after restarting my adapter.

Is there any way for me to fix problem for good? My WiFi cuts off really randomly from time to time and that's really frustrating..

If there's anything I missed please let me know and I'll try to provide it!

Thank you so much!

A:Ethernet Not Working

The link that shows up on your post - "I also couldn't find any new drivers..." - If you posted that intentionally, do not use the 'driver updater' program it links to. It's malware. My question would be who is the oem of your computer, and which LAN card make/model?

Read other 2 answers
RELEVANCY SCORE 40.4

This is my first time here so I hope I have the right forum. We have 2 laptops and 2 desktops.My sons desktop was fine when he went to bed and when he woke up he could not connect to our d-link dir-655. it says no network to connect to. I have changed the Ethernet cord and this did not help. Is there any way to tell if the motherboard Ethernet has went bad? He has a gateway with windows vista. Thanks.
 

A:Ethernet not working

Welcome to TSG
Ok.So is this the only pc on your home net that is having this problem ?
And it is ethernet not wireless ?
Make and model of modem and ISP name ?
So from the failing pc let's see:

From a Johnwill post on the Networking Forum

Try these simple tests.

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

In the command prompt window that opens, type the following commands one at a time, followed by the Enter key:

IPCONFIG /ALL

PING <computer_IP_address> For addresses,follow instructions below&#8230;.

PING <default_gateway_address>

PING <dns_servers>

PING 206.190.60.37

PING www.yahoo.com
Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

<computer_IP_address> - The IP Address of your computer, obtained from the IPCONFIG command above. IPV4 for Vista

<default_gateway_address> - The IP address of the Default Gateway, obtained from the IPCONFIG command above.

<dns_servers> - The IP address of the first (or only) address for DNS Servers, obtained from the IPCONFIG command above.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
______
 

Read other 2 answers
RELEVANCY SCORE 40.4

Hello, well this i my first problem post on here. I recently had to dump everything on my computer to get rid of Surfsidekick adware that ruined it. Well I started from scratch with reinstalling windows XP and everything. I put in the restore disk that came with my Dell Dimension 2400 cpu and got what ever programs i thought were nessesary. Could have missed some. I have no idea whats needed. After all that I couldnt connect to the internet with my Ethernet Cable. My wife plugged in the USB to our cable modem and thank god that worked cause i would not be typing this to you right now. Under my Device Manager under other devices there are yellow question marks with small exclamation points on; Ethernet Controller, PCI Modem, and USB Digital Still Camera. Im thinking i need a Ethernet Driver but i dont know which one from the Dell site to download or if that is even the problem. Someone please help.
SSgt Ernest Cooper USAF

A:Ethernet Not Working

You might be able to get some help from your SIP on this one.

Read other 5 answers
RELEVANCY SCORE 40

Hello,


Please help me! Today suddenly my internet stopped for no reason! When I open the device manager and click on other devices and click network my Ethernet controller has a little yellow (!)sign next to it and when I click properties it says no driver installed, please tell me what to do! I have drivers I guess, I just installed an Atheros driver there for the network but somehow it doesn't recognize it or I do not know what is the problem, please help, please!

Thank you

Best Regards
Stefany

A:Ethernet controller not working!

Hi Stefany93, Have you tried right clicking on the device with the exclaimation mark against it and selecting "update driver" ? , Windows ashould then find the driver for you Are you sure you have an Atheros ethernet controller ?

Read other 8 answers