Over 1 million tech questions and answers.

multiple BSOD win32k.sys

Q: multiple BSOD win32k.sys

Hi, i've been having multiple BSOD ever since i installed windows 7 86bit on my computer! before i had windows vista. Before installing windows 7 i had to upgrade my computer with memory, i installed 2X1G memory sticks, the computer already had 2X512mb installed. I also installed a 1G nvidia GeForce 9500 GT graphics card. The blue screens appear every day or every 2-3 days, sometimes two times in the same day. It always points to the win32k.sys. I've have installed the latest updates for my drivers, have run memtest run overnight with no errors. Have tried formatting and installing windows7 two times but the BSOD keep appearing. I also ran a chkdsk on the drive an still getting the errors. I ran the system health report on windows and everything passed. I have googled my problem with no luck. Mys specs are
Hp pavilion a1357c pc
amd athlon 64x2 Dual core processor 4200+
3GB or Ram
240 GB hard disk
motherboard model A8AE-LE (AmberineM)

Please help with any kind of suggestion, I would apprecciate your help in trying to resolve this problem. Thank you.

here is a whocrashed report that might help!
On Sun 5/2/2010 2:59:35 AM your computer crashed
This was likely caused by the following module: hardware
Bugcheck code: 0x1000008E (0xC0000005, 0x933A41A8, 0x97C3799C, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
Dump file: C:\Windows\Minidump\050110-40625-01.dmp

On Sat 5/1/2010 8:50:25 PM your computer crashed
This was likely caused by the following module: ntkrnlpa.exe
Bugcheck code: 0x1000008E (0xC0000005, 0x82C4D5D3, 0xA32C7B44, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
Dump file: C:\Windows\Minidump\050110-30046-01.dmp
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

On Sat 5/1/2010 4:32:28 AM your computer crashed
This was likely caused by the following module: win32k.sys
Bugcheck code: 0x1000008E (0xC0000005, 0x97BFBF9B, 0x88110A60, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
Dump file: C:\Windows\Minidump\043010-33687-01.dmp
file path: C:\Windows\system32\win32k.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Multi-User Win32 Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

On Sat 5/1/2010 1:28:55 AM your computer crashed
This was likely caused by the following module: hardware
Bugcheck code: 0x1000008E (0xC0000005, 0x9777D1FA, 0xA29D6C88, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
Dump file: C:\Windows\Minidump\043010-32656-01.dmp

On Wed 4/14/2010 2:09:59 AM your computer crashed
This was likely caused by the following module: win32k.sys
Bugcheck code: 0x50 (0xE7010995, 0x1, 0x81FBC3F4, 0x2)
Error: PAGE_FAULT_IN_NONPAGED_AREA
Dump file: C:\Windows\Minidump\041310-25671-01.dmp
file path: C:\Windows\system32\win32k.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Multi-User Win32 Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

On Tue 4/13/2010 3:23:14 AM your computer crashed
This was likely caused by the following module: win32k.sys
Bugcheck code: 0x1000008E (0xC0000005, 0x82080834, 0x8ED0B894, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
Dump file: C:\Windows\Minidump\041210-29250-01.dmp
file path: C:\Windows\system32\win32k.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Multi-User Win32 Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

On Sat 4/3/2010 9:46:13 PM your computer crashed
This was likely caused by the following module: win32k.sys
Bugcheck code: 0x1000008E (0xC0000005, 0x97814CFF, 0xA2DF38F4, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
Dump file: C:\Windows\Minidump\040310-24890-01.dmp
file path: C:\Windows\system32\win32k.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Multi-User Win32 Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

On Sat 4/3/2010 5:05:57 AM your computer crashed
This was likely caused by the following module: win32k.sys
Bugcheck code: 0xF7 (0x371AF2AD, 0x979566B6, 0x686A9949, 0x0)
Error: DRIVER_OVERRAN_STACK_BUFFER
Dump file: C:\Windows\Minidump\040210-25859-01.dmp
file path: C:\Windows\system32\win32k.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Multi-User Win32 Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

On Fri 4/2/2010 3:57:19 AM your computer crashed
This was likely caused by the following module: hardware
Bugcheck code: 0x1000008E (0xC0000005, 0x821FE1EB, 0xA3765C58, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
Dump file: C:\Windows\Minidump\040110-24671-01.dmp

On Thu 4/1/2010 1:33:02 AM your computer crashed
This was likely caused by the following module: ntkrnlpa.exe
Bugcheck code: 0xA (0xC0005130, 0x0, 0x0, 0x82A7A6A1)
Error: IRQL_NOT_LESS_OR_EQUAL
Dump file: C:\Windows\Minidump\033110-26875-01.dmp
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

On Wed 3/24/2010 8:11:03 PM your computer crashed
This was likely caused by the following module: win32k.sys
Bugcheck code: 0x50 (0xA34B0CCC, 0x0, 0x97288186, 0x0)
Error: PAGE_FAULT_IN_NONPAGED_AREA
Dump file: C:\Windows\Minidump\032410-32375-01.dmp
file path: C:\Windows\system32\win32k.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Multi-User Win32 Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

On Sat 3/20/2010 11:00:25 PM your computer crashed
This was likely caused by the following module: win32k.sys
Bugcheck code: 0x1000008E (0xC0000005, 0x976D7315, 0xA349BAE8, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
Dump file: C:\Windows\Minidump\032010-25984-01.dmp
file path: C:\Windows\system32\win32k.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Multi-User Win32 Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

On Fri 3/12/2010 1:49:47 AM your computer crashed
This was likely caused by the following module: dxgmms1.sys
Bugcheck code: 0x10E (0x1F, 0x97C009B8, 0x0, 0xC5F4)
Error: VIDEO_MEMORY_MANAGEMENT_INTERNAL
Dump file: C:\Windows\Minidump\031110-24921-01.dmp
file path: C:\Windows\system32\drivers\dxgmms1.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: DirectX Graphics MMS
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

On Tue 3/2/2010 4:30:35 AM your computer crashed
This was likely caused by the following module: win32k.sys
Bugcheck code: 0x1A (0x5003, 0x96630000, 0x2F80, 0xBC4FA2)
Error: MEMORY_MANAGEMENT
Dump file: C:\Windows\Minidump\030110-25609-01.dmp
file path: C:\Windows\system32\win32k.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Multi-User Win32 Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

On Mon 3/1/2010 4:05:33 AM your computer crashed
This was likely caused by the following module: win32k.sys
Bugcheck code: 0x1A (0x5003, 0xC0802000, 0xDF42, 0x13E28009)
Error: MEMORY_MANAGEMENT
Dump file: C:\Windows\Minidump\022810-26218-01.dmp
file path: C:\Windows\system32\win32k.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Multi-User Win32 Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

On Sun 2/21/2010 2:14:28 AM your computer crashed
This was likely caused by the following module: nvlddmkm.sys
Bugcheck code: 0xC9 (0xC, 0x87B274F4, 0x8EB68F68, 0x0)
Error: DRIVER_VERIFIER_IOMANAGER_VIOLATION
Dump file: C:\Windows\Minidump\022010-29328-01.dmp
file path: C:\Windows\system32\drivers\nvlddmkm.sys
product: NVIDIA Windows Kernel Mode Driver, Version 197.45
company: NVIDIA Corporation
description: NVIDIA Windows Kernel Mode Driver, Version 197.45

On Thu 2/18/2010 3:40:16 AM your computer crashed
This was likely caused by the following module: win32k.sys
Bugcheck code: 0x1000008E (0xC0000005, 0x968F0ED5, 0x8EB17AF4, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
Dump file: C:\Windows\Minidump\021710-35250-01.dmp
file path: C:\Windows\system32\win32k.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Multi-User Win32 Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

On Sun 2/14/2010 2:46:37 AM your computer crashed
This was likely caused by the following module: hardware
Bugcheck code: 0x1000008E (0xC0000005, 0x96F1C7F7, 0x98E93C5C, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
Dump file: C:\Windows\Minidump\021310-24656-01.dmp

On Sat 2/13/2010 10:53:08 PM your computer crashed
This was likely caused by the following module: ntkrnlpa.exe
Bugcheck code: 0xA (0xC000E6A8, 0x0, 0x0, 0x828856A1)
Error: IRQL_NOT_LESS_OR_EQUAL
Dump file: C:\Windows\Minidump\021310-24906-01.dmp
file path: C:\Windows\system32\ntkrnlpa.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

On Sat 2/13/2010 4:52:45 AM your computer crashed
This was likely caused by the following module: win32k.sys
Bugcheck code: 0x50 (0xFFFFFF55, 0x0, 0x8287B7D5, 0x0)
Error: PAGE_FAULT_IN_NONPAGED_AREA
Dump file: C:\Windows\Minidump\021210-24234-01.dmp
file path: C:\Windows\system32\win32k.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Multi-User Win32 Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

On Tue 2/9/2010 4:29:51 AM your computer crashed
This was likely caused by the following module: win32k.sys
Bugcheck code: 0x1000008E (0xC0000005, 0x822CD913, 0x8CF5FC68, 0x0)
Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
Dump file: C:\Windows\Minidump\020810-35468-01.dmp
file path: C:\Windows\system32\win32k.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Multi-User Win32 Driver
The crash took place in a standard Microsoft module. Your system configuration may be incorrect, possibly the culprit may be another driver on your system which cannot be identified at this time.

RELEVANCY SCORE 200
Preferred Solution: multiple BSOD win32k.sys

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: multiple BSOD win32k.sys

i installed windows 7 86bit on my computer! Click to expand...

There is 32 bit and 64 bit installs. Do you mean x86 based? x86 is 32 bit. If running 32 bit, try installing the original RAM only and see if you have the errors; my thinking is incompatible RAM. You may also want to try removing the 2 x 512 banks and try the 2 x 1gb only.

=============
To see if your computer is running a 32-bit or 64-bit version of Windows, do the following:

1. Open System by clicking the Start button Windows, clicking Control Panel, clicking System and Security, and then clicking System.
2. Under System, you can view the system type.

Read other 2 answers
RELEVANCY SCORE 68.8

Hello
I am truly hoping somebody here can help me fix this issue. My last resort will be to reformat the PC but I figured I would try here first since you guys are so awesome. For the past 2 weeks I have been getting multiple BSODs with a combo of win32k.sys errors and nv4_disp.dll errors (the nv4 usually happens when I play WoW) This BSOD problem has gotten way out of hand. I have bluescreened 3 times this morning alone and its only 10:30am est here now. Here are the past 5 or so Minidumps. Thank you in advance for any help with this.
 

A:Multiple BSOD win32k.sys

the nv4 error is an nvidia driver issue, you may want to update the graphics drivers for your card. That may solve both but will at least solve the one.
 

Read other 1 answers
RELEVANCY SCORE 68

hi,,,
the last weeks i have multiple BSOD's and i dont know hot to fix them...i installed a clean setup of win7 64 sp1 a couple of days ago without windows update enabled and a few software i needed....i have tested memory sticks individual with memtest86+ (8passes) and with windowd diagnostic tool for an hour and found no errors..Nevertheless sometimes windows freezes and becomies very slow and when i reinstall memory stick in the slot windows becomes stable again...sometimes it doesnt boot so i have to plug out and then plug in memory sticks to boot again.

here are the minidump's
DANIEL-PC-Τρι_20_10_2015_232837,66.zip

also i have done these tests
memory diagnostic results.rar
CBS3.rar
avgrep.rar

Read other answers
RELEVANCY SCORE 67.2

Hey guys,

I'm having some issues with a newly built . I've now recieved two (2) 0x03b BSOD's both citing different files as the culprit. I had a previous issue with the system randomly rebooting, but I remedied this by increasing my VTT voltage to 1.15 because I have 16gb of memory.

It ran perfectly after that for about 2 weeks, then the BSOD's started.

They happen randomly, when just web surfing or idle, and they don't seem to be caused by stressing the system.

I was successfully able to run multiple stress tests like Prime95, Intel Burn-In, for 24 hours with no issues, but then will get a BSOD randomly surfing the web or just having the PC be idle.

I've attached my error files and minidump files according the thread stickied, hopefully you guys might be able to point me in the right direction for firguring out the issue.

Thanks!

System specs:

Intel i5 2500k
2x MSi 560 Ti Twin Frozr II in SLi
ASuS P8p67-Deluxe Motherboard.
16gb G.Skill DDR3 Ram
Corsair 750W TX Enthusiast PSU.
Windows 7 X64 Ultimate Retail

My system is not overclocked, all drivers are updated, all windows updated are applied, and BIOS is on the latest firmware.

Temperatures aren't the issue either I don't believe., I've been monitoring them with MSi Afterburner and Realtemp.

A:Multiple BSOD, New System. (0x0000003b, win32k.sys, hal.dll)

  
Quote: Originally Posted by TotalMalice


Hey guys,

I'm having some issues with a newly built . I've now recieved two (2) 0x03b BSOD's both citing different files as the culprit. I had a previous issue with the system randomly rebooting, but I remedied this by increasing my VTT voltage to 1.15 because I have 16gb of memory.

It ran perfectly after that for about 2 weeks, then the BSOD's started.

They happen randomly, when just web surfing or idle, and they don't seem to be caused by stressing the system.

I was successfully able to run multiple stress tests like Prime95, Intel Burn-In, for 24 hours with no issues, but then will get a BSOD randomly surfing the web or just having the PC be idle.

I've attached my error files and minidump files according the thread stickied, hopefully you guys might be able to point me in the right direction for firguring out the issue.

Thanks!

System specs:

Intel i5 2500k
2x MSi 560 Ti Twin Frozr II in SLi
ASuS P8p67-Deluxe Motherboard.
16gb G.Skill DDR3 Ram
Corsair 750W TX Enthusiast PSU.
Windows 7 X64 Ultimate Retail

My system is not overclocked, all drivers are updated, all windows updated are applied, and BIOS is on the latest firmware.

Temperatures aren't the issue either I don't believe., I've been monitoring them with MSi Afterburner and Realtemp.


These were Related to RTCore64.sys MSI Afterburner from Micro-Star Int'l Co. Ltd. Yours is from 2005 I would remove it at least to test.

Read other 4 answers
RELEVANCY SCORE 67.2

Hi,

Laptop has been having a lot of BSOD randomly I've attached the SF Diagnostics Log below, any ideas whats causing the issue?

A:Multiple BSOD with STOP: 0x0000008E Win32k.sys

Please continue troubleshooting here: BSOD after presumably after Install of Fonts package using GPO

Read other 3 answers
RELEVANCY SCORE 60.4

Hello. Good Day to all. Permission to post. I just search for my problem and i didn't find any answers yet.

I'm receiving a BSOD several times i keep getting BSOD mostly when browsing with google chrome.

What i did so far :

-I just installed whocrashed and found an error (you can see it in the bottom).

-Reformat my PC (still no luck)

-Run memtest in 12 hrs and didn't find any error

-Update my video driver and fix 1 BSOD problem while playing games!

UPDATE: I just attached the sf diagnostic result.

My PC Specs :

-AMD FX-8320
-GIGABYTE 990 FXA-UD3
-8 GB 2x4 GSKILLS RIP JAW RAM
-ASUS DIRECT CU HD 7850 1GB 256BIT
-1 TB HDD WESTERN DIGITAL
-SEASONIC PSU 520W
-AEROCOOL STRIKE X ADVANCE WITH 3 FANS

*Please help me fix the BSOD it's really annoying my PC is one month old and i'm keep getting this

Thanks in advance!
Here's some result of Whocrashed :
[ALREADY FIX]

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Sat 1/18/2014 6:29:05 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\011714-17971-01.dmp
This was probably caused by the following module: cdd.dll (cdd+0x6CF9)
Bugcheck code: 0x3B (0xC0000005, 0xFFFFF96000676CF9, 0xFFFFF88008AA0110, 0x0)
Error: SYSTEM_SERVICE_EXCEPTION
file path: C:\Windows\system32\cdd.dll
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: Canonical Display Driver
Bug check description: This indicates that an exception happened while executing ... Read more

A:Randomly BSOD on my new PC - win32k.sys (win32k+0xC4283)

Bump. I just attach the sf diagnostic result thanks.

Read other 3 answers
RELEVANCY SCORE 60

Hello,

I recently have been having an issue related to playing poker and having my computer BSOD. I play on the clients from pokerstars.com, 888.com, fulltiltpoker.com, carbonsports.com, and partypoker.com while running the program holdem manager and usually running firefox for use of grooveshark. I have run bluescreenview and here is what it comes up with (I'm not sure how to better post this but hopefully you guys are familiar enough with it to understand it):

121612-9750-01.dmp 12/16/2012 2:10:58 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041790 fffffa80`0bfe87e0 00000000`0000ffff 00000000`00000000 win32k.sys win32k.sys+24282a x64 ntoskrnl.exe+7efc0 C:\Windows\Minidump\121612-9750-01.dmp 8 15 7601 262,144

121612-10171-01.dmp 12/16/2012 1:06:03 PM MEMORY_MANAGEMENT 0x0000001a 00000000`00041790 fffffa80`0c0f2b50 00000000`0000ffff 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+7efc0 NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7601.17944 (win7sp1_gdr.120830-0333) x64 ntoskrnl.exe+7efc0 C:\Windows\Minidump\121612-10171-01.dmp 8 15 7601 262,144

win32k.sys win32k.sys+24282a fffff960`000c0000 fffff960`003d6000 0x00316000 0x50ad9b54 11/21/2012 10:26:12 PM

ntoskrnl.exe ntoskrnl.exe+eab50 fffff800`02e57000 fffff800`0343f000 ... Read more

A:BSOD while playing poker on multiple online poker clients, win32k.sys

Code:
BugCheck 1A, {41790, fffffa800bfe87e0, ffff, 0}

Probably caused by : win32k.sys ( win32k!SURFACE::Map+175 )

Code:
Usual causes: Device driver, memory, kernel
Follow these steps -

Memory:RAM - Test with Memtest86+
Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Since, you have been using Registry Cleaners, there may be untold damage to your registry, since these registry cleaners usually delete or modify registry entries which can corrupt your Windows operating system. Use System File Checker to scan for any corrupted or missing protected Windows 7 files:SFC /SCANNOW Command - System File Checker
Upload a .NFO file:

Start > Type: msinfo32 > File, Save

Read other 9 answers
RELEVANCY SCORE 49.6

Ranging from Far Cry 3 (which is a bit buggy already) to other games like Dead Island, I'm experiencing blue screens. Never happens outside of playing games. Also a lot of games tend to crash on me giving me the error message

'X.exe has stopped working' either leaving me to click close the program or kill it via task manager.

System:

Intel i5 2500k at Stock Settings
EVGA GTX 580 SC
8GB RipJawsX (2x4GB Sticks)
Asus P8P67 Pro Motherboard
Win7 Ultimate (64 Bit)

A:BSOD During Gaming - BSOD's include dxgmms.sys, win32k.sys

Welcome aboard, EvilPengy.

Let us start from applying a known good stable driver version.
Download and install Driver Fusion.
Reboot the computer in Advanced Boot Options, safe mode. Search Driver Fusion in your start menu, and remove all components of your nVidia display driver.
Boot normally now. Go to Drivers - Download NVIDIA Drivers, Drivers > Beta and Legacy; search there with your cards particulars for GeForce 306.23 Driver, dated 13.9.2012 and install it.
Then, stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

And, Stress test the video memory, too.
|MG| Video Memory Stress Test 1.7.116 Download

Let us know the results.

Read other 9 answers
RELEVANCY SCORE 48.4

Hi there,

I'm a Video editor who is now constantly being interrupted by BSOD's with the following codes:
--------------------------------------
0x0000008E (0xC0000005, 0xBF8E5F91, 0xB580D868, 0x00000000)

win32k.sys
--------------------------------------
I've run the latest memtest for about 14 hours (didn't realise it kept going until you stop it) and it didn't find any faults.

Another point is that it always happens whilst I'm editing, I use the computer for a lot of other demanding tasks, effects creation etc and sometimes games and it never happens during those.
There seem to be a lot of 08E errors around and I don't know if theyre all the same or what so I thought I'd better get some direct advice.

Any help would be greatly appreciated

Thanks

Paul Hawkridge

Mesh Elite, XP MCE
Asus P5N-E SLI Motherboard
Core2Duo E6700 @ 2.66GHZ
Nvidia Geforce 7950GT 512mb
4x1GB Ram @ 533mhz
Creative X-Fi
 

A:BSOD - Win32k.sys

Read other 7 answers
RELEVANCY SCORE 48.4

Hey all, been getting at least 2 BSOD's a day, started a few days ago, heres my crash dump.

Loading Dump File [C:\Users\Exceptions\Desktop\020711-17674-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*f:\localsymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c0d000 PsLoadedModuleList = 0xfffff800`02e4ae50
Debug session time: Mon Feb 7 16:51:43.184 2011 (UTC - 6:00)
System Uptime: 0 days 2:25:39.511
Loading Kernel Symbols
...............................................................
................................................................
.......................................
Loading User Symbols
Loading unloaded module list
..........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41284, fffff70440015001, 426da, fffff70001080000}

Probably caused by : win32k.sys ( win32k!SURFACE::bDeleteSurface+3a2 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
**********... Read more

A:BSOD from win32k.sys

Heres yesterdays crash:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c02000 PsLoadedModuleList = 0xfffff800`02e3fe50
Debug session time: Sun Feb 6 19:11:18.366 2011 (UTC - 6:00)
System Uptime: 0 days 10:19:23.067
Loading Kernel Symbols
...............................................................
................................................................
..........................................
Loading User Symbols
Loading unloaded module list
..............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 4E, {99, 1a9f8e, 2, 1a9e9a}

Probably caused by : memory_corruption ( nt!MiBadShareCount+4c )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

PFN_LIST_CORRUPT (4e)
Typically caused by drivers passing bad memory descriptor lists (ie: calling
MmUnlockPages twice with the same list, etc). If a kernel debugger is
available get the stack trace.
Arguments:
Arg1: 0000000000000099, A PTE or PFN is corrupt
Arg2: 00000000001a9f8e, page frame number
Arg3: 0000000000000002, current page state
Arg4: 00000000001a9e9a, 0

Debugging ... Read more

Read other 2 answers
RELEVANCY SCORE 48.4

My Dad's desktop has been giving him the blue screen of death recently, last week or so to be specific. No changes have been made to the computer to cause this. I took a screenshot of the most recent bsod and I also have the log from bluescreenview. I would appreciate some help in figuring out the problem. Thanks in advance.[quote]==================================================
Dump File : Mini112312-01.dmp
Crash Time : 11/23/2012 12:17:40 AM
Bug Check String : KERNEL_MODE_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x1000008e
Parameter 1 : 0xc0000005
Parameter 2 : 0xbf8488a2
Parameter 3 : 0xb7b05ae4
Parameter 4 : 0x00000000
Caused By Driver : win32k.sys
Caused By Address : win32k.sys+488a2
File Description : Multi-User Win32 Driver
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 5.1.2600.6307 (xpsp_sp3_gdr.121022-1132)
Processor : 32-bit
Crash Address : win32k.sys+488a2
Stack Address 1 : win32k.sys+48976
Stack Address 2 : win32k.sys+e82a2
Stack Address 3 : win32k.sys+e879a
Computer Name :
Full Path : C:\WINDOWS\Minidump\Mini112312-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 2600
Dump File Size : 90,112
==================================================[/quote]

A:BSOD Win32k

Hello again, esmn.Let's collect some more information: I'll have a look at it and help you try to resolve the problem. Download the following 2 files and save both to the My Documents folder:BSOD_XP_v1.3_jcgriff2_PROD_.exe - a system file collection application provided by jcgriff2 autoruns.exe - an application provided by Microsoft SysInternals. Go to the My Documents folder and run #1 (BSOD_XP_v1.3_jcgriff2_PROD_.exe). (That will also run #2.)It will take a little time to complete: Please be patient and wait for it to finish.A new folder named TSF_XP_Support will be created in My Documents. Zip up the newly created TSF_XP_Support folder.Right-click on the TSF_XP_Support folder > Send to ... > Compressed (zipped) Folder.
The newly created zip file will be located in the My Documents folder. Please upload the zip file to a file sharing website of your choice and and post a link to it in this thread so that we can access your uploaded zip file.Note: The BC forums will allow a total attachment size of only 512 kb (and what you need to attach will exceed this limit).See the suggestions in the following links for recommendations on file sharing websites:http://lifehacker.com/388284/best-online-file-sharing-serviceshttp://www.hongkiat.com/blog/15-great-free-online-file-sharing-alternatives/http://www.smashingapps.com/2008/08/28/5-best-free-file-hosting-services-to-store-your-files.html

I can recommend : Also suitable is Please Publish a Snapshot using Specc... Read more

Read other 5 answers
RELEVANCY SCORE 48.4

Hello all, I'm new to the forum. Upon reading about somewhat similar issues, I decided to just post mine, as I didn't happen to see anything that matched my problem exactly. inb4 "this has been answered 2039424 times," I am deeply sorry, but I didn't see it. :-/

Onward!

Okay, so I just recently got a BSOD for your "typical" System_Service_Exception, and I ran memtest86 immediately to make sure it wasn't the memory (as that has been the case before). The dump is included herein. iTunes was actively running at the time, which the dump appears to indicate, and something about win32k.

I asked the oracle (Google) and found a few potential solutions, but most pertaining to memory failure. Anyway, enough rambling. Just wanted to be clear.

Thank you in advance for your assistance!

Johnny B.

A:BSOD win32k

theres no real clues i can see in your .dmp file at the moment but there are some drivers that need researching and updating




Quote:
GVTDrv64.sys fffff880`08971000 fffff880`0897b000 0x0000a000 0x44fd22ca 05/09/2006 07:10:02
jraid.sys fffff880`011c7000 fffff880`011e2000 0x0001b000 0x48855b12 22/07/2008 03:59:14
RTKVHD64.sys fffff880`05a42000 fffff880`05babf80 0x00169f80 0x488853f3 24/07/2008 10:05:39
000.fcl fffff880`06dcb000 fffff880`06df6000 0x0002b000 0x48dcdf7a 26/09/2008 13:11:22
AODDriver.sys fffff880`0897b000 fffff880`08982000 0x00007000 0x48f2d0df 13/10/2008 04:38:55
purendis.sys fffff880`05a00000 fffff880`05a0c000 0x0000c000 0x490695a0 28/10/2008 04:31:28
pnarp.sys fffff880`05bf1000 fffff880`05bfd000 0x0000c000 0x4906a9ac 28/10/2008 05:57:00


also what antivirus and or third party firewall are you using ?

Read other 4 answers
RELEVANCY SCORE 48.4

BSOD win32k.sys while browsing uploaded the dump file. When you install graphic card driver an additional ge force tool also install I am posting image of it. I don't know if geforce experience is the problem

A:BSOD win32k.sys

Additional information is required.

1. Download this .BAT file to your desktop by clicking the icon

2. Right-click the .BAT file and 'Run as Administrator'
3. Locate the .ZIP file created on your desktop, and upload it here in your next reply.

Read other 2 answers
RELEVANCY SCORE 48.4

Edit; My thread seems to have messed up the format of the page, so i'm sorry :3

Hello, first post Prepare for a long one, I truly appreciate it if you can read it. I'll try to bold the bits that seem most important.

I'm having a little issue with my PC, though it's not really causing any major distress at the moment.

First a little background, which might also explain why i'm getting the BSOD if i'm unlucky enough that it's my ram or OS installation.. I have a PC (shock horror) that's around 1.5-2 years old. After about a year or a little more the hard drive started to click and freeze, and eventually went to hell; I got that replaced at the beginning of this year (got the PC back on the 30th January). Sort of ironic that it happens right outside of the warranty. But yeah - as of the end of January brand new hard drive and freshly installed Vista.

So for the past 3 months i've been running comfortably, faster than before in fact. I mostly use it for gaming, playing a free MMO and Battlefield 2. No problems running games. 2 days ago an old MMO I used to play was re-released. The graphics are very old and outdated so my PC runs it easily, albeit in a very low resolution. Last night, I had the first BSOD i've ever had on this PC. Unfortunately it was set to autorestart so I didn't manage to get all the information down, all I managed to grab was that it was referring to the file "Win32k.sys". I was running th... Read more

A:BSOD (Win32k.sys)

Just one more point:

The first BSOD came after around 15 hours of the game running (left it idle whilst sleeping then continued later)

The second BSOD occurred after around 10 hours of play.

.. hey it was a weekend
 

Read other 1 answers
RELEVANCY SCORE 48.4

Hello guys. Since i upgraded to windows 7 ultimate x64 (clean install) i keep taking a frustrating BSOD about win32k.sys. Besides i can't find tuner driver (winfast tv 2000 xp deluxe) this bsod makes me think seriously of returning to Xp Sp3. Usually i noticed that this error occurs when i have a game minimized and i chat on yahoo messenger. (especially when i have CS in taskbar or lineage 2). My system specs are:
Gigabyte GA-P35-DS3L
Intel E8200 2.66 Ghz
4 GB RAM (4x 1GB Kingmax KLED48F-A8KI5 at 1066 Mhz - these are OC to 1066 as they run at 800 standard, and timings are modified 5-5-5-15 with +0.2 V from 1.8 to 2.0).
Seagate 320 GB Sata II
Winfast Nvidia 8600 GT which also causes some problems as once in a while BSOD is about cdd.dll when i exit games and temperatures of GPU reach easily 70 degrees dunno why. Sometimes windows 7 says that nvidia driver has stopped responding and recovered.

So what could be the problem guys? It's rly frustrating. I attach to this message 2 minidumps if they can help. Thx in advance.

Later edit: I mention that i had run memtest86+ for 2 hours without any problems and i posted this after a lot of searching documentation on Google. Some people say it might be a hardware problem. Well why windows xp hadn't crashed and windows 7 does if it's hardware? If it was hardware problem all systems would have been unstable. Anyway it could be because of OC.

A:BSOD win32k.sys

  
Quote: Originally Posted by Dyablor


Hello guys. Since i upgraded to windows 7 ultimate x64 (clean install) i keep taking a frustrating BSOD about win32k.sys. Besides i can't find tuner driver (winfast tv 2000 xp deluxe) this bsod makes me think seriously of returning to Xp Sp3. Usually i noticed that this error occurs when i have a game minimized and i chat on yahoo messenger. (especially when i have CS in taskbar or lineage 2). My system specs are:
Gigabyte GA-P35-DS3L
Intel E8200 2.66 Ghz
4 GB RAM (4x 1GB Kingmax KLED48F-A8KI5 at 1066 Mhz - these are OC to 1066 as they run at 800 standard, and timings are modified 5-5-5-15 with +0.2 V from 1.8 to 2.0).
Seagate 320 GB Sata II
Winfast Nvidia 8600 GT which also causes some problems as once in a while BSOD is about cdd.dll when i exit games and temperatures of GPU reach easily 70 degrees dunno why. Sometimes windows 7 says that nvidia driver has stopped responding and recovered.

So what could be the problem guys? It's rly frustrating. I attach to this message 2 minidumps if they can help. Thx in advance.

Later edit: I mention that i had run memtest86+ for 2 hours without any problems and i posted this after a lot of searching documentation on Google. Some people say it might be a hardware problem. Well why windows xp hadn't crashed and windows 7 does if it's hardware? If it was hardware problem all systems would have been unstable. Anyway it could be because of OC.


Dyablor

\Hi and... Read more

Read other 7 answers
RELEVANCY SCORE 48.4

hi all,my computer BSOD at random time, im not sure what caused that, hope the dump helps

A:BSOD win32k.sys

OK a quick glance at the files you provided, and a couple of things:


Code:
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Unable to load image \SystemRoot\system32\ntkrnlpx.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpx.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpx.exe
Windows 7 Kernel Version 7600 MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16905.x86fre.win7_gdr.111025-1503
Machine Name:
Kernel base = 0x82643000 PsLoadedModuleList = 0x8278b810
Debug session time: Sat Jun 8 00:51:19.723 2013 (UTC - 4:00)
System Uptime: 4 days 10:34:53.613
Unable to load image \SystemRoot\system32\ntkrnlpx.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpx.exe
*** ERROR: Module load completed but symbols could not be loaded for ntkrnlpx.exe
Loading Kernel Symbols
...............................................................
................................................................
..........................................
Loading User Symbols
Loading unloaded module list
......................
ERROR: FindPlugIns 80070005
ERROR: Some plugins may not be available [80070005]
*******************************************************************************
* *
* Bugcheck Analysis ... Read more

Read other 1 answers
RELEVANCY SCORE 48.4

I have a custom built PC that is running windows XP. The original problem I am suppose to be fixing is a disk read error prior to windows loading. I performed a check disk and did some other maintenance procedures. This seemed to work for a few days. Then I got the disk read error message back again. I decided to do a repair install of XP. This worked for 1 day and then problems started. I got a BSOD and it told me win32k.sys, kernal inpase error, 0X0000007A. After I got this BSOD and loaded back up windows took 10 min to load up. Now that I am in windows it is malfunctioning big time. It is running incredibly slow, the desktop icons disappear and come back again. I read that this error is typical of bad RAM, or a windows installation gone bad. I am going to run memtest to test the RAM. What else should I try to determine the problem. I cannot use the system like it is right now? Thanks for the help?

A:BSOD/ Win32k.sys

Remove the hard drive...attach it to a second system as a secondary drive, run chkdsk /r on that drive or any partitions on it.

If this cannot be done, I would run the appropriate hard drive manufacturer's diagnostic on the drive...actually, I would do that regardless of the previous suggestion.

Louis

Read other 7 answers
RELEVANCY SCORE 48.4

Hello everybody,


I am getting random blue screens all the time for different errors including win32k.sys and memory management. BSODs also randomly occur on bootup as well. I have a Dell Studio Laptop 1535 with 4 gigs of ram: Radeon HD 4300 Series graphics card
Dual Intel 5750 2.0 GHz processor
Windows 7 Ultimate 32bit
This is not the original OS installed (Windows Vista 32bit was the original OS)
The age of my system is a little over 2 years old
The current OS installation is a few weeks old
Thanks for your help.

A:win32k.sys BSOD

Uninstall Kaspersky with this tool:

Removal tool for Kaspersky Lab products


Uninstall SUPERAntiSpyware.


Install MSE as the replacement:

https://www.microsoft.com/security_essentials/




Update drivers:

RICOH XD SM R5C852
rixdptsk.sys Tue Nov 14 20:35:19 2006

Broadcom NetLink (TM) Gigabit Ethernet NDIS6.x
k57nd60x.sys Sun Apr 26 07:23:19 2009

PerfectDisk Raxco Software
DefragFS.SYS Wed Aug 19 13:31:36 2009

Broadcom 802.11 Network Adapter wireless
bcmwl6.sys Tue Jul 07 20:44:47 2009






Crash Dumps:


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [F:\a\Minidump\D M P\122310-25802-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0x82a39000 PsLoadedModuleList = 0x82b81810
Debug session time: Thu Dec 23 00:49:26.915 2010 (UTC - 5:00)
System Uptime: 0 days 0:01:13.881
Loading Kernel Symbols
...............................................................
................................................................
.................................
Loading User Symbols
Loading unloaded... Read more

Read other 3 answers
RELEVANCY SCORE 48.4

hey guys so i've been having some issues lately with bsod's, however it seemed with some of the guys help on here we managed to solve it, but alas a new one today, first time seeing this one too win32k.sys? ill upload the dump if anyone could help it would be very much appreciated

A:win32k.sys bsod

Hello and Welcome to SF, let me take a look, will be right back ...
edit:

Update:

Lycosa.sys Fri Jan 18 03:51:42 2008
Razer Tarantula Keyboard
Run Memtest obernight:
RAM - Test with Memtest86+
Attach your latest crash dumps if bsod's happen again.

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [F:\a\Minidump\D M P\110910-26566-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`02c55000 PsLoadedModuleList = 0xfffff800`02e92e50
Debug session time: Tue Nov 9 09:00:11.936 2010 (UTC - 5:00)
System Uptime: 0 days 6:56:35.279
Loading Kernel Symbols
...............................................................
................................................................
......................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* ... Read more

Read other 4 answers
RELEVANCY SCORE 48.4

Hopefully I can detail this out as much as possible.

Recently, my virus scanner told me that win32k.sys had a virus, and it cleaned it out. Now, my computer shuts down randomly, and whenI boot up, I get the BSOD sayong there's an error with win32k.sys. This only happens when I boot up normally, but in safe mode I run fine. Is there a way to run a diagnostic on the file or such? I might be able to retreive the exact error codes if needed.
 

A:Win32k.sys BSOD

It would help if you had the error number, probably 0x0000008E.

Have you tried replacing the driver from the XP CD? Do you have an XP CD?
 

Read other 1 answers
RELEVANCY SCORE 48.4

I've recently reinstalled XP Home on a customer's computer. He is now getting BSODs after leaving it idle for 15 mins -1 hour. He was having some filesystem related troubles earlier (following the reinstall) but I think I have those resolved. He reports seeing BSODs during those troubles, but doesn't remember the exact message. Since I (probably) took care of the filesystem problem, the BSODs have only been coming during idle periods - so far anyway. I'm currently typing this on the computer in question.

Here's some of the information from the BSOD:

KERNEL_DATA_INPAGE_ERROR

STOP:0x0000007A (followed by a few other memory addresses)

(something) win32k.sys (something)

I've turned off the screensaver on the unlikely chance that might be the trouble. I'm about to run a memory test, and after that, load up Knoppix and do a dd if=/dev/urandom | gzip -c >> /dev/null to see if I can cause some cpu-usage problems. Any other ideas?
 

A:BSOD on win32k.sys

So far I've run adaware and avg (more killing time than hoping it'll fix anything). Run memtest86 - no problems, as expected.

I've turned off the screensaver and put on service pack 2. I haven't had any BSODs while I've been here - check the timestamp. I've decided to forego the cpu intensive thing. I'm thinking of just leaving it at that - give it a week, if no BSODs turn screensaver back on. Any other ideas?
 

Read other 2 answers
RELEVANCY SCORE 48.4

So i was getting a Win32k.sys BSOD page fault in non page fault area. I noticed it this morning and it seems it happened right after a windows update. At first i was unable to boot in to windows and at all. At the splash screen it would just blue screen every time. So i ran the mem test and it passed then i tried to system restore to yesterday the 13th and everything seems to work fine now, but of course i am being cautious and wanted to see what you guys think.

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 8145 Mb
Graphics Card: NVIDIA GeForce GTX 770, -2048 Mb
Hard Drives: C: Total - 1907726 MB, Free - 397964 MB;
Motherboard: MSI, Z77A-G45 (MS-7752)
Antivirus: Microsoft Security Essentials Prerelease, Updated and Enabled
 

Read other answers
RELEVANCY SCORE 48.4

I just had a very random BSOD while just using the computer for browsing the web. It was related to win32k.sys. I have attached the dump files to this post. Any help would be much appreciated.

EDIT: I'm running Windows 7 Home Premium 64bit with SP1 and have an i5 760 processor and a GT240 graphics card.

A:Win32k.sys BSOD

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Mike\Documents\Kingston\BSODDmpFiles\Bankai\Windows_NT6_BSOD_jcgriff2\021812-14508-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03055000 PsLoadedModuleList = 0xfffff800`0329a670
Debug session time: Fri Feb 17 14:41:05.842 2012 (GMT-7)
System Uptime: 0 days 1:36:05.216
Loading Kernel Symbols
...............................................................
................................................................
....................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fff... Read more

Read other 1 answers
RELEVANCY SCORE 48.4

hey guys,

can you guys help me figure out how to fix this?
is this memory issue?i had ntoskrnl issue back then with 2x8gb ddr2 ram installed,somehow i had figured it out it was 1 of the faulty ram,so i had removed 1 of the faulty ram out,everything seems to be fine...but now it came again. both ram are faulty?bad motherboard?software issue?
i had uploaded the latest and older mini dump below.

Thanks!
 

A:win32k bsod help!

Read other 7 answers
RELEVANCY SCORE 48.4

Hi,
Friend of mine is getting BSOD at regular intervals and I do not have much Idea how to fix it because never came across with this error before. did some basic troubleshooting like changing RAM, Updating windows but not good.When I ran Bluescreen view found win32k.sys was causing it. I am attaching the image of the same and the .dmp file with this..
Counting on experts help..
cheers

A:BSOD win32k.sys

Hi mangarkevin.

You supplied a stray crash dump only. Nothing very precise can be said based on it. But your display driver is very old.

Code:
9aa0a000 9b3f9000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Sat Oct 15 12:04:27 2011 (4E992973)
CheckSum: 009DBCBF
ImageSize: 009EF000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Try to update it: Drivers - Download NVIDIA Drivers

Let us know the situation after doing it. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 3 answers
RELEVANCY SCORE 48.4

This is an ongoing problem this computer's been giving me for some time now. Randomly the system (XP Pro) would blue screenwith a 0x0000050 complaining about ntfs.sys, nv4disp.dll (I think) and mainly win32k.sys.
Norton complains about an 'adware threat' sbcss.exe or something found in Windows folder, can't remove it via norton and was a bit worried about removingit directly.
If anyone can help with either of these problems I'd appreciate it
 

A:win32k.sys in a BSOD

Read other 13 answers
RELEVANCY SCORE 48.4

Hi everybody
I have bought new computer and I have some Blue screens
I want to know if this error is not from the hardware.

OS: Windows XP SP2
CPU: Core2duo 2.33 GHz
Graphic Card: Geforece 8600 GTS (256MB)
Ram: 4GB
Motherboard: Gigabyte GA-P35-DS3L

here is the dump:




Microsoft (R) Windows Debugger Version 6.6.0003.5
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\WINDOWS\Minidump\Mini112507-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *... Read more

A:BSOD (win32k.sys)

Your debugger dump info is invalid... You have not set the proper symbol path in the debugger
 

Read other 11 answers
RELEVANCY SCORE 48.4

Had this crash some 10 minutes ago which was tightly followed by another crash minutes later.

Computer specs:
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110622-1506) Full Retail
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: EP43-DS3L
BIOS: Award Modular BIOS v6.00PG
Processor: Intel(R) Core(TM)2 Quad CPU Q9650 @ 3.00GHz (4 CPUs), ~3.0GHz
Memory: 4096MB RAM
Card name: NVIDIA GeForce GTX 560 Ti
Driver Version: 8.17.12.8562

None of my components are overclocked in any way.

First crash is 22370-01. Just before the crash I was watching a movie on my main screen and was opening a new tab in firefox. A while earlier my graphic drivers had crashed and reset. I was running BOINC manager which tends to take up a lot of CPU although I've capped it at 50% and a couple of hours earlier I had updated Itunes which wanted to restart to afterwards.

Second crash, 21028-01 was maybe three to five minutes after I had rebooted from the first crash. I was watching another a different movie whilst browsing the web for information on my BSOD.

I'm using Windows Media Player Classic for my movies with the CCCP codec pack although it would be weird if that started to cause problems now since I've used it for a really long time without any problems.

I might also mention that I've had my graphic drivers crash and reset previously but never before a BSOD.

If there's any other information that is nee... Read more

A:BSOD win32k.sys

We would prefer that you follow the http://www.sevenforums.com/crashes-d...tructions.html so we can have as much information as possible about your system and possible causes of the crashes. I will analyze your .dmp files now, but please try to follow those instructions when you respond.


Code:


Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Mike\Downloads\BSODDmpFiles\white0devil\012012-22370-01\012012-22370-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\users\mike\documents\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03265000 PsLoadedModuleList = 0xfffff800`034aa670
Debug session time: Fri Jan 20 06:26:35.266 2012 (UTC - 7:00)
System Uptime: 0 days 6:00:16.640
Loading Kernel Symbols
...............................................................
................................................................
...............................
Loading User Symbols
Loading unloaded module list
..........
*******************************************************************************
* *
* ... Read more

Read other 1 answers
RELEVANCY SCORE 48.4

I have just reinstalled XP 3 times now to rectify BSODs which display either:

IRQL_EQUAL_OR_NOT_EQUAL (well something like that)
PAGE_FAULT_IN_NON_PAGED_AREA
and blank ones

the first two sometimes display win32k.sys

then after rebooting and sending the report to M$, firefox opens and says it's something to do with a driver.

These BSODs happened after I bought a Sidewinder X3 mouse if that helps

Thanks

~Mart_UK
 

A:BSOD win32k.sys

Read other 11 answers
RELEVANCY SCORE 48.4

I just got a brand new computer built. ati radeon HD 2600 XT,Amd antlon 64 x2 dual core 5200, 2 gig of ram, raid hardrive setup. All my drivers are completely up to date. When i play Counterstike source or hl2 it runs real smooth. Just when I go to exit to the desktop i get a blue screen O Death . I thought hl2 would be different and it was only css, so i tried playing that . Went for 15 minutes great gfx everything no lag, then it hit a loading screen and boom bsod . When i get it it gives me an error that says something like this.

Problems caused by:win32k.sys
Page_fault_in_nonpaged_area

Disable bios memory operations such as caching or shadowing

Tech info: *stop: 0x00000050(0xe1126304,0x00000000,0xbf89412b,0x00000001)

*win32k.sys_adress bf39412b base at bf800000, date stamp 45f013f6
I don't know what anything means there . My grandfather built my computer , I don't know bios or anything.I already posted twice on the steam support forums, and so far noone knows anything.

There is one thing i found on there but don't understand what its trying to tell me.

Question
I get this error: 'Page Fault Found In A Non Paged Area' what is causing this?


Answer
Anytime Windows says there is a PAGE or DATA error then the problem is almost certainly a memory issue.

There are several possible causes for the following types of error messages:

Page Fault Found In A Non Paged Area BSOD's
Memory Dump BSOD's
IRC BSOD's

(BSOD = "Blue S... Read more

A:Win32k.sys Bsod!

Try testing your RAM with memtest86.

Read other 3 answers
RELEVANCY SCORE 48.4

Hello, I am a novice when it comes to computers, but know enough to be dangerous. With that said, for the past several weeks I have been getting BSOD's when using my laptop and they seem associated with the win32k.sys driver. Attached are the DMP files of the two most recent crashes.

==================================================
Dump File : 091515-28719-01.dmp
Crash Time : 9/15/2015 1:41:44 PM
Bug Check String : UNEXPECTED_KERNEL_MODE_TRAP
Bug Check Code : 0x1000007f
Parameter 1 : 0x00000008
Parameter 2 : 0x8e139750
Parameter 3 : 0x00000000
Parameter 4 : 0x00000000
Caused By Driver : win32k.sys
Caused By Address : win32k.sys+d1b5e
File Description : Multi-User Win32 Driver
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 6.1.7600.16385 (win7_rtm.090713-1255)
Processor : 32-bit
Crash Address : win32k.sys+d1b5e
Stack Address 1 : win32k.sys+981a9
Stack Address 2 : win32k.sys+9515f
Stack Address 3 : win32k.sys+85e36
Computer Name :
Full Path : C:\windows\Minidump\091515-28719-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 131,072
Dump File Time : 9/15/2015 1:42:57 PM
==================================================

==================================================
Dump File : 091615-39187-01.dmp
Crash Time : 9/16/2015 11:53:26 AM
Bug Check String : UNEXPECTED_KERNEL_MODE_TRAP
Bug Check Code : 0x1000007f
Parameter 1 : 0x00000008
Parameter 2 : 0x807c9750
Parameter 3 : 0x00000000... Read more

A:BSOD - win32k.sys

Someone else can address your blue screen issues and dump files, but I do have a question for you.

---------------------------------------------------------

Why are you running Windows 7 Professional SP1 32-bit in your computer with 8 GB of RAM?

A 32-bit version of Windows won't make use of more than 3.25 - 3.5 GB, so there's no point in having more than 4 GB in the computer.

In some cases, having more than 4 GB in the computer will cause a 32-bit operating system to make use of less RAM.

That appears to be the case in your computer because your log shows it's making use of only 2.92 GB.

----------------------------------------------------------
 

Read other 5 answers
RELEVANCY SCORE 48.4

Hi,
I need some help, please.
My laptop keep getting BSOD when opening Firefox, Wordpad, and Fonts in Control Panel.
I am using Windows 7 Ultimate x64 SP1.

Edit:
changed system locale back to Japanese -> stop bsod for now
checked fonts folder with Fix Fonts Folder 2.0 and got dozens of corrupts fonts >.<
now trying to get some replacement fonts from other computer

A:BSOD Win32k.sys

Welcome aboard.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 19, {20, fffff900c37579b0, fffff900c3757a00, 2505000f}

Probably caused by : win32k.sys ( win32k!EngFreeMem+21 )

Followup: MachineOwner
---------

2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Arguments:
Arg1: 0000000000000020, a pool block header size is corrupt.
Arg2: fffff900c37579b0, The pool entry we were looking f... Read more

Read other 1 answers
RELEVANCY SCORE 48.4

Hello All Experts,
I have a vostro 1500 laptop orginally came with win xp professional sp2 64 bit. I did a CLEAN install of Windows 7 Ultimate 64 bit. Everything went fine but now it keeps crashing with BSOD win32k.sys

I uploading the dump folder and PERFMON html file (zip folders) as adviced. I have just installed Windows 7 Ulitmate 64 bit a week ago.

I am scared that if this doesnt get fixed I might loose my work. If this cant be fixed I am willing to go back to Win XP professional 64 bit.

Please help me out experts. I appreciate it

some system info:
original OS : Windows Xp Professional SP2 64 bit
current OS: Windows 7 Ultimate 64bit
Ram: 3GB
Hard drive : 320 GB

A:BSOD with win32k.sys

Is there a reason on why you are switching from 32bit to 64bit?
Unfortunately, the Dell website does not provide drivers for the 64bit version - I suggest that you do a clean install again and have it 32bit.

These drivers cannot be updated until it is switched to 32bit.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff96000175314, fffff8800793f920, 0}

Probably caused by : win32k.sys ( win32k!SURFACE::bDeleteSurface+264 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugchec... Read more

Read other 3 answers
RELEVANCY SCORE 48.4

Hi All,

Just had a BSOD while defragging my windows drive using Defraggler. Possible contributory factor CCleaner used to clean out various temporary files (not registry).

Files are attached.

Subsequent chkdsk and sfc /scannow ran clean.

A:BSOD Win32k.sys

Hello,

This is not the customary BSOD-analyst thing to say, but I suggest you forget about this one. I have seen BSODs occur during Defraggler and other defragmentation programs before, I haven't learned why yet.

The dump doesn't mention anything of significance, other than Defraggler was "on top" at the time of the crash; we knew that already though.

I see some drivers that could use an update, but I'd be surprised if they were the cause of this.

My advice: stick with the Windows defragment tool, and if you get more BSODs, we'll go from there. Trying to troubleshoot this one is more work than I'm sure is worth to you.

...Summary of the dumps:

Code:

Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Debug session time: Sat Mar 26 08:55:00.648 2011 (UTC - 4:00)
System Uptime: 0 days 3:26:50.146
Probably caused by : win32k.sys ( win32k!GreBatchTextOut+35 )
BUGCHECK_STR: 0x1E_80000003
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: Defraggler64.e
FAILURE_BUCKET_ID: X64_0x1E_80000003_win32k!GreBatchTextOut+35
??????????????????????????????????????????????????????????????????????????????????????``

Read other 8 answers
RELEVANCY SCORE 48.4

Well, I keep getting this bsod.. I have no idea how to read into these minidump files but I know its win32k.sys that is causing the crash.

Could someone please give me some insight as to what is causing these BSOD's
Frequency is every 2-4 days. I tried to upload the actual .dmp file but it's not letting me.

XP 64 pro
Microsoft ® Windows Debugger Version 6.7.0005.1
Copyright © Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\Minidump\Mini120907-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: C:\WINDOWS\Symbols
Executable search path is:
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Windows Server 2003 Kernel Version 3790 (Service Pack 2) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Kernel base = 0xfffff800`01000000 PsLoadedModuleList = 0xfffff800`011d4140
Debug session time: Sun Dec 9 22:36:44.640 2007 (GMT-5)
System Uptime: 1 days 9:26:46.553
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Loading Kernel Symbols
......................................................................................................................................................................
Loading User Symbols
Loading unloaded module list
..................................................
********************... Read more

A:Win32k.sys Bsod Help

Does this ring any bells? PROCESS_NAME: ???????AAlso, the stack text appears a bit messed up (too many of the same addresses). Did you use the 64 bit version of the debugger to analyze the dump file? Or it could just be my lack of experience with 64 bit dump files Since it refers to win32k.sys - does this belong to a process on the system that's emulating a 32 bit OS? Although I don't know, I wonder if the 64 bit versions use win32k.sys - shouldn't it be win64k.sys? (just guessing on my part - don't have a 64 bit OS to look at)FWIW - this link http://aumha.org/a/stop.php#0x50 states that it's usually a memory problem, although other things (such as drivers) can cause it. I'd try running Memtest86 - http://www.memtest86.com/

Read other 7 answers
RELEVANCY SCORE 48.4

Hello,

I have quite suddenly been getting frequent BSOD's. It only flashes for a moment but one of the more recent times I did catch the win32k.sys referenced in it. The only thing out of the normal that has started in concurrence with this is Mozilla Firefox is crashing all the time now. Any help would be appreciated. I have attached the requested TSF_Vista_Support Folder but the Performance Monitor would not generate a report for me. After running the tests, it stated Error: An error occured while attempting to generate the report. The wait for the report generation tool to finish has timed out.


Louie

Windows 7 Ultimate x64
System is about 2 years old
OS installed 10/2009
Intel E8400 3.0 ghz (3.6 ghz)
2x nvidia 8800gts 512
1x nvidia gt220
Asus Striker II Formula
Corsair 750 Watt

A:BSOD win32k.sys

Hi -

There were no dump files in the attached zip. Please check \windows\minidump - copy all out to TSF_Vista, zip & attach to next post.

I did look through the other files and see many "Live Kernel Events", which are just 1 step below an actual BSOD. Live Kernel Events + win32k.sys usually are indicative of an issue with video transitioning from user mode (win32k) into kernel code territory.

I also noticed in WERCON the repeated crashing of this app since November 2009 -

Code:
11/1/2009 5:02 PM Application Error Faulting application name: unace32.exe, version: 2.0.1.0,
time stamp: 0x3a76026a&#x000d;&#x000a;Faulting module name: unace32.exe, version: 2.0.1.0,
time stamp: 0x3a76026a&#x000d;&#x000a;Exception code: 0xc0000005&#x000d;&#x000a;Fault offset: 0x00006658&#x000d;&#x000a;Faulting process id: 0xd70&#x000d;&#x000a;Faulting application start time: 0x01ca5b150da4b7a0&#x000d;&#x000a;Faulting application path: C:\Users\David T Lewis\Downloads\!RnE - 2009.11.01 11.56.31 - blhtlg01\blhtlg01\unace32.exe&#x000d;&#x000a;Faulting module path: C:\Users\David T Lewis\Downloads\!RnE - 2009.11.01 11.56.31 - blhtlg01\blhtlg01\unace32.exe&#x000d;&#x000a;Report Id: 4b55e600-c708-11de-88ed-001fc63e3180
The timestamp 0x3a76026a translates to Mon Jan 29 18:53:14 2001

Too old for a 2010 upated Windows 7 x64 system.

Regards. . .

jcgriff2

.

Read other 3 answers
RELEVANCY SCORE 48.4

For awhile now I've been getting the BSoD on my computer. It's a Dell XP Inspiron 530S with Service Pack 2 (well at least I think it's SP2). Sometimes, although rarely, it happens at random. Mostly, its occurances are predictable.

For example:
-A friend of mine downloaded a video game onto my PC. It worked for the first two or so weeks, then when I loaded it up I got blue screened. Now the game, or any game that I download, will not play at all because of the BSoD.
-It also occurs when I try to set my screen resolution from 800x600 to 1024x768, or any other resolution. In fact, it is so predictable that in order to write down the information listed below, I initiated the BSoD by trying to set resolution.
-Finally, I get the BSoD when my computer goes to sleep mode (standby). I log back onto the computer and no matter what I click on next, I get the BSoD. It happens everytime.

Listed below is exactly what the BSoD read (minus the help advice given by the computer):

----------

The problem seems to be caused by the following file: Win32k.sys

PAGE_FAULT_IN_NONPAGED_AREA

Tech Information:

Stop: 0x00000050 (0xE47EB304, 0x00000000, 0xBF89BAC9, 0x00000001)

Win32k.sys - Address BF89BAC9 base at BF800000,
Datestamp 47e0e106

----------

Then after I reboot, this message comes up:

Diskette drive 0 seek failure

Press F1 to continue, F2 to enter setup

...to which I press F1.


Now I don't know a thing abo... Read more

A:BSoD Win32k.sys

Also, can any solutions posted be as intructional as possible? I'm talking step-by-step.

Read other 1 answers
RELEVANCY SCORE 48.4

I just install Ulead Video Studio for my DV camera and when I try to create DVD,after some time get this error

Win32k.sys PAGE_FAULT_IN_NONPAGED_AREA

Technical information
STOP:0x00000050 (0xC6353B24 0x00000000,0xBF81407E 0x00000000)
Win32k.sys - Address BF81407E base at BF800000, date stamp 45F0146F

Beginning dump of physical memory
Physical memory dump complete
Can anybody help me with this ??????? THANKS
 

A:BSOD Win32k.sys

Read other 7 answers
RELEVANCY SCORE 48.4

Hello,

As of recently I have been having issues with BSOD's. Up to this point I have only had it happen to me twice, but I would still like to fix this issue so that it does not happen anymore. The first BSOD was about two weeks ago or so, and I just got another one today. Both times the exact same thing came up on the screen, and after reveiwing the minidump file with bluescreen viewer, I found out the problem was in the win32k.sys file. Other than this, I really do not know what to do. I have looked in different topics throughout different forums, and each one says something different, so I figured I would try to get some help here.

The system I am using is a Sony VAIO notebook, only 3 months old and it is running windows 7 home premium x64 (pre-installed). One thing that I repeatedly came across was the suggestion of using memtest to help solve the issue, but as I understand you need a blank disc to do this am I correct? If so, I do not have any. One of the main problems is that I am off at school, and do not have installation discs with me right now, so I am hoping I am not going to need to uninstall something like my mouse or whatever, because I would need to wait a little bit in order to re-install it.

Anyways, sorry for the jumbled information, I hope that someone is able to help me out here. I have attached the zip file below.

A:BSOD - win32k.sys

  
Quote: Originally Posted by ajto22


Hello,

As of recently I have been having issues with BSOD's. Up to this point I have only had it happen to me twice, but I would still like to fix this issue so that it does not happen anymore. The first BSOD was about two weeks ago or so, and I just got another one today. Both times the exact same thing came up on the screen, and after reveiwing the minidump file with bluescreen viewer, I found out the problem was in the win32k.sys file. Other than this, I really do not know what to do. I have looked in different topics throughout different forums, and each one says something different, so I figured I would try to get some help here.

The system I am using is a Sony VAIO notebook, only 3 months old and it is running windows 7 home premium x64 (pre-installed). One thing that I repeatedly came across was the suggestion of using memtest to help solve the issue, but as I understand you need a blank disc to do this am I correct? If so, I do not have any. One of the main problems is that I am off at school, and do not have installation discs with me right now, so I am hoping I am not going to need to uninstall something like my mouse or whatever, because I would need to wait a little bit in order to re-install it.

Anyways, sorry for the jumbled information, I hope that someone is able to help me out here. I have attached the zip file below.


OK You are going to have to run memtest but it can also b... Read more

Read other 1 answers
RELEVANCY SCORE 48.4

Hi
I buy Windows 7 full retail at my hardware from year 2008 and i got bsod,so i just think its can be becasue i have windows 7 so i install xp pack 3,but still i got bsod so i go install windows 7 again.So i want know why my system still crashing its when i playing games or just surfing at internet or when i got bsod and then my system turns on i got another bsod and i must turn of pc and wait and then turn on.
Hardware is old about 2-3 years and my windows 7 is original ,xp not becasue i just want know if problem is windows 7 or just pc.
Bsod start randomly just one day when i play like every and and boom bsod its about long time ago.

So i post here my zip where i use BSOD Dump & System File Collection app and System Health Report

I think its cant be drivers becasue i after install i download news at everythink but i dont know.
Minidump upload.
ps:sorry for my english,i am from czech so i learning english

A:Bsod-Win32k.sys

Update your Graphic drivers

Read other 7 answers
RELEVANCY SCORE 48

I have been working with a win7 consultant here. we ran several memory tests he asked me to post here as the memory looks good.
 
IMMEDIATELY after login into regular or safe mode I get BSOD with the following 
 
Win32k.sys
PAGE_FAULT_IN_NONPAGED_AREA
The blue screen error code is: 0x00000050
 
Other Factors:
 
thru various rescue disks, i can look at my drives and copy files. I have copied everything I need. it is a lenovo, but the only date available on Lenovo rescue is 11months ago, which is when i bought the computer.
 
As far as MS restore goes every restore point has an error. it only gives me about the last 10 dates.
So onless there is MALWARE fix, i will need to return to sept 2012, which is when i bought the computer.
 
I took a look at my registry (no i did not change anything) and the first object that boots is something called r_word or may be reg_word. in that object is a file for win32k.sys.
 
This makes sense as the  "win32k.sys"  is in the wrong area
 
If this object is for Microsoft Word, THEN i can distinctly remember that Word was crashing a lot prior to the attack of the BSODs. one of my rescue disks has a registry editor. What would happen if i where to delete this object that has win32k.sys in it.
 
Before all this started, my pre-loaded ms word got corrupted
 
before i turn the clock back 11 months, is there a malware fix for this
 
 
 

A:BSOD: Win32k.sys PAGE_FAULT_IN_NONPAGED_AREA

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/504638 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

Read other 7 answers
RELEVANCY SCORE 48

Hello, I have been occasionally getting bsods on my computer, at random times, and am not sure why, it seems somewhat unlikely to be a driver problem, and I think I may be having hardware issues! Any help would be greatly appreciated, and attached you will find my 3 minidumps i have received as a result of the BSODs.

PC:
Mobo: Gigabyte MA770-UD3
Ram: 2gb (2x1) PQI turbo DDR2 800
GPU: ATI 3870 manufactured by Saphire
PSU: 500w Apevia
CPU: AMD Kuma 7850 @ 2.8ghz
HDD: WD 250gb SATA
Optical: LG DVD burner

OS:
Windows Vista Ultimate x64 SP 2

A:BSOD Probably caused by : win32k.sys, help!

Here are the minidump results:

*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff9600013f090, fffffa600941ef70, 0}
Probably caused by : win32k.sys ( win32k!PFEOBJ::vFreepfdg+e8 )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff9600013f090, Address of the exception record for the exception that caused the bugcheck
Arg3: fffffa600941ef70, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
------------------

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
win32k!PFEOBJ::vFreepfdg+e8
fffff960`0013f090 0fba60300f bt dword ptr [rax+30h],0Fh
CONTEXT: fffffa600941ef70 -- (.cxr 0xfffffa600941ef70)
rax=f9e03a2800000161 rbx=0000000000000000 rcx=fffff900c299e910
rdx=fffffa8004697ca0 rsi=fffff900c0652a40 rdi=fffffa600941f820
rip=fffff96... Read more

Read other 4 answers
RELEVANCY SCORE 48

BSOD System_Service_Exception win32k.sys

Seemingly random BSOD. Doesn't happen while playing games, usually when Im messing around on the desktop and browsing, and sometimes when the display is turning back on from a period of inactivity. I've tried catalyst drivers versions 13.4, 13.9 and 13.12. All of them installed fresh after a driver cleaning. Attached my diagnostic zip.

Edit: this is a roughly week old install of Win 7 x64.

A:BSOD System_Service_Exception win32k.sys

Please fill in system specs fully, and I'll take a look straight away:

System Info - See Your System Specs

Read other 3 answers
RELEVANCY SCORE 48

I've been getting this error more and more frequently on my new laptop. I've included the logs created with SF Diagnostic Tool following the instructions here: http://www.sevenforums.com/tutorials/92394-sf-diagnostic-tool-using-troubleshooting.html

it always seems to happen while i'm working with Max/MSP and Ableton Live, but that could easily be a coincidence as that's pretty much all i use this computer for.

It may or may not be related, but Max and Ableton themselves have been crashing a lot too. My first thought was that it might be related to a sort of "warning" that's popped up a few times since i got the computer. It comes up randomly in a custom HP window stating basically that the AC adapter/charger (that came with my computer) isn't rated high enough in some manner or another for my computer and that processing power will suffer because of it. Then it lists a url where i can buy the proper HP products they failed to provide me with. Has anyone heard of this issue with HP laptops? Does it sound like it could be the cause of my problems or would you suspect something else?

Any help greatly appreciated!

A:BSOD SYSTEM_SERVICE_EXCEPTION (win32k.sys)

If you bought the system from a legitimate HP retailer, then the accessories that came with it will be the appropriate one's.
To be sure that a mistake wasn't made in the packaging, visit the retailer that sold it to you and have them check it out.

If this is a new computer, then someone has messed with the setup of the system.
A new HP will come with UEFI and SecureBoot enabled out of the box - yet this one doesn't have SecureBoot enabled.
And, without SecureBoot enabled, I have to suspect that the OS was reinstalled - and that may mean that whoever reinstalled the OS didn't install the proper drivers and programs needed for the system to function properly.

Have you made the HP recovery drive/disks? If so, it may be easiest to enable SecureBoot and then reinstall Windows from the Recovery Media.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

WPRO_41_2001.sys Mon Nov 7 16:04:48 2011 (4EB847F0)
CACE Technologies WinPcap Packet Driver
http://www.carrona.org/drivers/driver.php?id=WPRO_41_2001.sys

Please note the drivers below that date from before the release of Windows 8.1 (17 Oct 2013) - check to see that each and every one is compatible w/Windows 8.1 (at the manufacturer's website). If not, you must either remove the device... Read more

Read other 6 answers
RELEVANCY SCORE 48

The system is getting repeated blue screen pointing to a problem with win32k.sys. Crashes atleast once a day

New system, clean install of windows 7 home premium 32bit.

A:Repeated BSOD win32k.sys

Hello,

Start out by testing your hard drive with SeaTools.

Two dumps mentioned your Ralink wireless drivers, so install these updated ones: RALINK SOFTWARE END USER LICENSE AGREEMENT

Run a RAM test as well: RAM - Test with Memtest86+

And Prime95: http://www.sevenforums.com/tutorials...t-prime95.html

...Summary of the dumps:

Code:

Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Mon Jan 3 18:56:14.009 2011 (UTC - 5:00)
System Uptime: 0 days 0:03:50.009
*** ERROR: Symbol file could not be found. Defaulted to export symbols for win32k.sys -
Probably caused by : win32k.sys ( win32k!FLOATOBJ_LessThan+e6 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x8E
PROCESS_NAME: firefox.exe
FAILURE_BUCKET_ID: 0x8E_win32k!FLOATOBJ_LessThan+e6
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sat Jan 1 00:27:49.635 2011 (UTC - 5:00)
System Uptime: 0 days 2:08:22.651
*** ERROR: Symbol file could not be found. Defaulted to export symbols for win32k.sys -
Probably caused by : win32k.sys ( win32k!EngAlphaBlend+1670 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x8E
PROCESS_NAME: OUTLOOK.EXE
FAILURE_BUCKET_ID: 0x8E_win32k!EngAlphaBlend+1670
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Fri Dec 31 22:18:38.222 2010 (UTC - ... Read more

Read other 2 answers
RELEVANCY SCORE 48

After going through SDk7.1 and trying to read the dump files myself using winDBG etc. I'm getting a little frustrated so I think if I ask for some help I won't feel bad about being able to read those things cause I really can't atm. Although I know I'm on the right track.

I'm getting a BSOD SYSTEM_SERVICE_EXCEPTION with a win32k.sys error maybe 3 or 4 times a week.
Eventviewer shows an error and I have it disabled to reboot automatically when it dumps.

It doesn't happen too often but I noticed the last time it did my fan was really loud when I turned the machine on. I'm not sure if it's a fan issue but thats the only thing I physically noticed. The fan never does that normally on boot up but once in a while (twice a month) when I power on it's loud as hell and then slows down to normal.

Anyway, it could be something else but wanted to mention that. I've attached a mini dump (memory.dmp is 300MB). If anyone can help I would really appreciate it. I will go back to try and read these dump files in the meantime. I'm in IT, I should be doing this myself!

I also ran SFC /SCANNOW and it came up ok.
Did not run driver verifier although I think I ran the automated one from Microsofts website the other day. (The "fix it" exe with a GUI) It only told me to enable my NIC (which I have disabled and dont use)

Updated my ASUS motherboard BIOS as well but that didn't seem to help. I don't do overclocking or anything but I do have a dual-boot Win7/WinXP machine with the help... Read more

A:BSOD win32k.sys Win7 64-Bit

  
Quote: Originally Posted by cimerians


After going through SDk7.1 and trying to read the dump files myself using winDBG etc. I'm getting a little frustrated so I think if I ask for some help I won't feel bad about being able to read those things cause I really can't atm. Although I know I'm on the right track.

I'm getting a BSOD SYSTEM_SERVICE_EXCEPTION with a win32k.sys error maybe 3 or 4 times a week.
Eventviewer shows an error and I have it disabled to reboot automatically when it dumps.

It doesn't happen too often but I noticed the last time it did my fan was really loud when I turned the machine on. I'm not sure if it's a fan issue but thats the only thing I physically noticed. The fan never does that normally on boot up but once in a while (twice a month) when I power on it's loud as hell and then slows down to normal.

Anyway, it could be something else but wanted to mention that. I've attached a mini dump (memory.dmp is 300MB). If anyone can help I would really appreciate it. I will go back to try and read these dump files in the meantime. I'm in IT, I should be doing this myself!

I also ran SFC /SCANNOW and it came up ok.
Did not run driver verifier although I think I ran the automated one from Microsofts website the other day. (The "fix it" exe with a GUI) It only told me to enable my NIC (which I have disabled and dont use)

Updated my ASUS motherboard BIOS as well but that didn't seem to help. I don't do overcloc... Read more

Read other 9 answers