Over 1 million tech questions and answers.

Solved: Enabling video card in BIOS

Q: Solved: Enabling video card in BIOS


I have purchased a new video card and I think I know what to do when it arrives... just not sure about the steps.

Ok, so I'm currently using onboard video. I was told that all I need to do is stick it in the PCI-E x16 slot and plug the power cable into the video card -- then enable it in BIOS.

How exactly do I enable it in BIOS? And do I need to disable the onboard video somehow?
Step by step instructions would be very helpful.

I am using an Asus M2NPV-VM Motherboard.

Preferred Solution: Solved: Enabling video card in BIOS

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Solved: Enabling video card in BIOS

Read other 15 answers

aiight, i have an AMD Duron processor, with a PCCHIPS K7 333 Motherboard. I assume that it had integrated video which worked for some time.

One day, while trying to get my DVD-ROM to work, i got a message kinda like this.

"You need to disable the TV Out function to work PowerDVD player"

stupidly and accidently, i shut off my videoadapter.

for about a week now, ive been trying everything to get it to work again. Everything up unitl the Windows XP welcome screen works, but then blackness. I know my PC still works, i can hear ths Windows XP start sounds and stuff.

i tried following a keystroke scenario, from holding the Windows Logo button and pressing R, "typing devmsgmt.msc" going to device manager and enabling it, but no avail. The best shot i had according to my friend was to install a different Video Card, and then using that one enable the old one. yet,i i installed the card in the AGP slot and i still the get the same problem.

I tried changing the Primary Graphics Adapter from PCI to AGP, which did nothing.

And then also tried to disable Allocate IRQ to PCI VGA, just to see what would happen. Nothing.

Idk what card i have, but i know it should be decent enough to run XP. Its not the best kind of card either, its just one im borrowing.

It had a black heat sync on it but no places to hook up wires and no jumpers to which i can see.

Im stumped.

A:Enabling Integrated Video by using a new Video Card...problems


Try pressing f8 during boot, go into safe mode.
If you are unable to get into safe mode, then
it seems to me you may need to reset cmos.

I'm assuming you have a normal boot screen prior to XP

Read other 6 answers

I put in an agp video card into my computer and it automatically disabled the video card integrated into my motherboard.

i wanted to use the integrated video card for a second moniter, is there any way to manually enable it.

It would be a great help if someone could tell me how.

A:Enabling a integrated video card

not possible

its not possible..but a agp CAN run dual monitors

Read other 15 answers

I installed a new HD last weekend to go with my old unit. While preparing for the process I searched and downloaded all the drivers for all my equipment. I then reformatted both drives, did a clean install of Windows XP Pro. While searching for the latest driver updates I found that Gigabyte (my motherboard) had a video card BIOS update for its GeForce FX 5700 Ultra. I have a PNY GeForce FX 5700 Ultra. I was about download the BIOS update but decided to go to the PNY website and check for it there. Neither PNY nor Nvidia show a BIOS update for that card. Nothing about video card BIOS at all on those two sites.
My question is...Should I try the Gigabyte video card BIOS update? I am having a minor problem with FarCry that is video card related. Is the BIOS unique to each company or is it the same from PNY to Gigabyte? If there is an update on the Gigabyte site wouldn't there be a need for the same on the other companys sites?

A:Solved: Video card BIOS

Read other 6 answers

I just got an HP h8-1237c, which has an i5-2320 processor. I thought it was a good move, but I need to run other copies of windows in VirtualBox, which I can do fine in my old ASUS i5 computer. This one tells me I can't because I can't enable VT-x, as there's no place on the bios to do this. HP tech support was not helpful at all, and I even had to define virtualization to the tech.

Is there a way around this so I can install and run a 64 bit OS on this new PC, such as Windows 7, 64bit, or even 64 bit linux?

Thanks for the guidance in advance.


A:Solved: Enabling Hardware V when bios doesn't allow it

Look under the security settings in the BIOS.

Read other 2 answers

Answered own question. Went to change setting in BIOS, setting was already at max at 8.
However, I noticed that the setting for onboard or PCI was set to PCI. CHANGED it to onboard. (That's what I have.)
Ramped all of the settings back up, still does it. Just not as often.

System was fine then,
Went from XP, to 7, then back to XP.
Good install, but monitor would flicker. (Green on, checked cables, etc. Conclusion: "Driver Problem")
Set SOME display property's low, reinstalled drivers, same problem.
Set "Video Acceleration" to almost none, and checked "Enable Write Combining,"
Reduced resolution to 800X600, reduced from 32 bit to 16 bit.
DPI is 96, 60 Htz, High Color
Flickering of monitor has pretty much quit. Only very occasionally as I write this.
Here's the rest of the info I think is needed. (Followed by the rest of my question.)

HP514x (Intel x86)
2.0 Ghz
503 Mb "Physical Memory"
Windows XP 5.1.2600 SP2
DirectX 9
Video Driver: Intel 82845G/GL/GE/PE/GV Graphics Controller
Memory Size: 64 Mg Internal

Ok, as I was restarting one of the times. I went into the BIOS to see what I could see.
The one thing that caught my eye was a video setting that allowed for me to increase or decrease Megabytes. It's currently at 8.
Does the "64" MGb "Memory Size" above mean I can set this up to 64? What is this for? I thought it was so you could use more RAM if you wer... Read more

A:Solved: Real quick basic video/card/bios/settings question

Read other 14 answers

I have an Intel mother board with onboard video. In getting ready to install my new pci-E video card, I checked BIOS settings and noted IGD DVMT memory and also aperture size. (These are for use of regular memory for the onboard video). Also the video select is set to auto for both primary video adaptor and to auto instead of pci-e and pci graphics.

I will insert the new video card, powerup and disable the onboard video through device manager.

When I insert the new video card and powerup, will the "software" disable the two IGD settings?

A:Bios video setting with new video card

Read other 11 answers

I will try to keep this short. I tried another forum here but had no luck. Maybe the hardware folks can help.

The other day i was happily playing games when my video card seemed to fritz out. The screen filled with visual garbage and di dthe same when i rebooted. I plugged in an old card which got to me to desktop but locked up there every time. Would work in safe mode but not regular mode or VGA mode. I tried a third card and got a bunch of beeps telling me there was no card. The catch is that all 3 of these cards seem to work in my old system i was using to test them.

Related problem:
I decided to try a windows reinstall since i did not hav emuch to lose on my computer. Since the computer only works in safe mode o tried it from there. Setup locked up. I tried booting from CD. next. It loads all the files then says it will start setup and locks up there. Does this every time.

To sum up:
i can not get any of my 3 video cards to work. 1 gives visual garbage, 1 is nnot recognized by the board, and 1 locks up on desktop. The one that locks up at desktop will work in safe mode but not VGA mode. I can not do a windows reinstall from CD or by playing CD in safe mode. Also Safe mode will randomly lock up if i try to do something like run an executable file.

So what to people think? MB going bad? Bad AGP slot might explain cards not working but why would that one work in safe mode then? Why the heck can i not reinstall windows when booting from CD?

P4 2.66mhz
Intel D... Read more

A:video card? MB? BIOS? Me?

Which version of Windows?

Read other 2 answers

Hi, I just built a computer (not my first) and I used an ASROCK P4AL-800 motherboard. When i started up it said:

Auto recovery function:
Please insert BIOS disk.

Long story short- nothing worked, not the CD that came with the motherboard, nothing. So i took out BIOS and put it back in. Now, my video card doesn't work. Its a Geforce FX2200 256MB AGP 8x card. But, I can now hear the computer booting up from the windows cd so my Bios problem is fixed, now its just a metter of the video card...

A:BIOS/video card problem

I just did a Google search to see if your particular Mobo has Onboard VGA . Did not find anything conclusive - but if it does you might want to check in Bios that Onboard VGA is set to Disabled as that may well cause a conflict with your Graphics Card.

Read other 2 answers

Hello. I am havin trouble with my VideoCard and the manufacturer is unable to assist me in the bios. I do not have a technical supported computer by Microsoft, so they are also unable to help me. I am need someone to help me configure my IRQ settings within my Windows XP Bios so that my Geforce 5500 fx card is on its own irq number. Currently the card is also stationed with a ethernet network adapter and a USB plugin. The company said it needs to be on its own number, but when I try to change the resources, they are unavaliable (tinted). Then they said I will have to do it manually through the bios, but I tried and it continuously moves the network adapter with it. I can not find any setting in the bios to MANUALLY or somehow change the VGA to its own IRQ resource. They mentioned reinstalling windows XP for the HAL, but I have much valuable information to refresh my computer and I do not have a removable hard drive to back up my files.

Also...if you are unable to help me, please give me a valid phone number for a secondary support line that will manage my bios that will not cost me anything. That would be much appreciated!

A:Video Card Problem and BIOS

Read other 6 answers

Bought a new video card, its a geforce gtx 1050 ti oc editio. 4gb. Installed it cpu just beeps and hangs at boot screen, then eventualy goes to a black screen. I ve heard that updating bios will fix it, so put old card back in win 10 comes back up found bios which is ami 7.14 2011 edition so found an update that was 2012 i believe updated everything said waa good, but no change to bios , still acts like its the same bios, does anyone have any kind of help, im stuck, and confused.

A:Updating bios on ami 7.14 for new video card

Hi, You need BIOS 8.xx or above. Please try     http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-p6-Desktop-PC-series/5187028/model/52336... Regards.

Read other 2 answers

motherboard:mitac luxor r01
graphic card:sis630
An AMIBIOS ID String Was Detected:

when i install sis630 xp driver v2.09 for video card,it cannot control gamma and bright,should i upgrade bios or this driver have bug,anyone can help?


Read other answers

I have a Asus P4R800-VM mobo with onboard video, trying to install new video card,ATI Sapphire X1650 Pro, 8X AGP Version 512MB DDR2 Memory. When first install and 1st boot works fine then demands restart. This is when I get Blue screen, don't have time to read any error messages. I can not find any way to disable the onboard card in bios, so I'm not sure if that is the problem. Any help would be very appreciated, I know everyone has problems, I really tried to do this before writing this.Thanks in advance.

A:Video Card Problem or Bios

Disable automatic reboot at BSOD and read the error message.

Read other 3 answers

I want to flash my X1950Pro 256mb BIOS so it loads automatically at my overclock setting each time I boot up.

Has anyone done this before? Some pointers would be appreciated.


Read other answers

hi all i have a jaton fx 5200 nvidia 128mb card
can you help me with the bios update .
I already went to jaton website but found nothing
or is there maybe a tool for scanning current bios driver and update it
I used MSI live update 3 but there wasn't a VGA BIOS UPDATE option :giddy:

A:Update bios Video Card

Do you need to update that BIOS? Or do you just feel like trashing your card and getting a new one?

Since it's an el cheapo (TM) manufacturer's product, then they probably have the stock NVIDIA BIOS.

Read other 3 answers

"you should then go into your BIOS and disable the onboard video (or choose PCI/AGP as the first video device), then once your FX5200 becomes the active video card you should be able to install the latest drivers for it"
- Here's an answer to a question i posted earlier

My only question is..... HTF do you do that?? I don't know how to go into my BIOS or do the otehr stuff.. can someone help please?

A:Using my BIOS to disable my Video Card... HOW??

I presume you're using a laptop (video is integrated on laptops unlike desktops) To access BIOS, there is a message when you boot that says something like "Press F1 for setup". The actual key varies from manufacturer to manufacturer. For Dell it's F2, others it's DEL, some it's F1, ... Just watch for the message and press that key immediately! Once in BIOS, read the top menu selection for video settings.

Read other 1 answers

I need help in disabling my video card and bios from my pc and also windows so i can insert my new pci 5200 3d card.

A:help w/ disabling my video card and bios

in the device manager disable the onboard
turn off the computer
install your new card and switch the monitor cable to it
turn on the computer and go into the bios and set it to detect the card first
save and exit the bios tapping f8
from the boot options choose vga mode
when windows finishes booting
disable a/virus
install your drivers
reboot the computer

Read other 2 answers

HP Pavilion 500-339Current video card Radeon R7 240.Video has been erratic after Windows 10 upgrade, to the point of not giving any output to dual monitors acccassionally.When I tried a new GeForce PCI-X 16 card the PC would not start. Power light came on, HDD light came on for maybe 5 seconds, then nothing.  Took out new card and reinstalled old one: PC booted up. Did this twice to confirm, even tried a brand new power supply withthe new GeFroce card - no joy.Someone told me that HP PCs have a locked BIOS so only particular cards or chipsets will work with particular models. Can anyone confirm this?

Read other answers

HI i need some help if anybody here is really fermiller on if i need to do this. do i need to update my BIOS or NO

My Bios version is 1.60
http://www.asrock.com/mb/Intel/Z77 OC Formula/?cat=Download&os=BIOS

Although i do see 2.00 Improve memory compatibility. so not sure if i need to tho. should i update to 2.30 for my GFX Card

Thank u Guys here at MT

A:Got A NEW video card 760 2GB. Should i update BIOS

That's a very delicate question, and more delicate decision.
Logic would tell that you should update your BIOS before installing your GTX 760. As your BIOS version is older (Year 2012.) than a release of GTX 760...

Read other 7 answers

Hello guys,
I have an AMD XP 1600 CPU and the motherboard has built in shared video. I recently bought a PCI vid card because the board doesn't have any AGP slot. First, I forgot to disable the on-board video before installing the PCI vid, but it works at 8 bit resolution. The other PCI cards such as modem and sound didn't work properly. The screen were blurry. So I played with the BIOS. I disable the shared memory on board thought that the PCI Vid card would take over, but the system wouldn't start up at all. When I restarted the computer there were beeps from the machine and the screen goes blank without even start up the screen where I press DEL. to go to the BIOS. How do I reset the BIOS so that I will start up default? I took out the PCI Vid card and it still doesn't work. If I disconnect the power and take out the little battery will it auto reset the BIOS and motherboard to default? Thanks in advance guys!

A:Please help with BIOS, Video Card, and MotherBoard

You can take out the battery, but also look for a small jumper often near the battery. Usually the set up is that the 1 and 2 pins are jumpered. Briefly moving the jumper to pins 2 and 3 will reset CMOS.

Read other 1 answers

Hi everyone, We recently were given a Pavilion h8-1260t and got all excited and ran out and bought a Geforce 970... found out through a bunch of reading that we can't use it because we can't update our BIOS. So... because it comes up in so many places, I figured I'd "go to the source" and ask here: What's the "best" video card we can actually run? We have installed a 500W PSU. Not sure if I'm providing enough details, so please let me know. Thanks,Andrew

Read other answers

I had a problem with a game recently (blue screening and crashes) so i updated my video card BIOS. Not only did this not fix the problem but it started others in games that used to be reliable but have now become nightmares. I bluescreen/ crash to desktop frequently in games i used to be able to play for hours with out any problem, and this problem has only started since I updated my Video card BIOS.

So my question is how do I revert to previous working BIOS for my video card, and one other problem is I do not know what version of BIOS i was running before-hand, I just upgraded.

Any help is appreciated.

A:Reverting to older Video Card BIOS

You revert by downloading an older version of the BIOS and flashing your video card with that.

As for not knowing what exact version you had.. Well, you will know better next time and will always save your old BIOS and write down the version before overwriting with new

Read other 1 answers

We bought a used M6600 in very nice shape.  The seller wiped the HDD, no OS.  Bios is A12.  When viewing system info, the Nvidia 3000M is not listed.  When running a diagnostic through F12, all tests show good but it shows video from the integrated intel HD GPU, not the Nvidia. 

I grabbed a Linux Mint disk to try to get booted in to see if it would be visible, but the screen eventually goes black after some loading, but the cursor is still active, indicating a possible vid issue, maybe? 
I removed the keyboard to ensure the card is in it, and there is certainly a card there.  I just need to ensure the health of the card before we get any further with it. 

Can anyone advise how to check this further?  Would the diagnostic testing show an issue with the card?  Possible missing driver? 

A:Please Help! M6600 video card not showing up in bios

You've pretty much pinned this down to a dying video card.  

Read other 1 answers

I replaced my AGP video card and my system was unable to boot with the new card. I tried clearing the BIOS CMOS with the jumper pins back to default and still no boot. I put the old video card back in and it booted normally.

The system is an MSI K8T Neo2 v2.0 with AGP 8X slot 3.0 spec, the new card is ASUS V9520-X with AGP 8X. I know that the card is OK because I took it out of another system where it has been working. The Award BIOS is up to date at v3.6.

What could be the problem here? Any ideas or suggestions would be appreciated.

Read other answers

A7N8X Deluxe motherboard
w/ amd athlon 2500+
radeon 9800 pro videocard
DVI Dell Ultrasharp flat panel

One month ago i started my comp and there were red lines that look like this w/ the regular screen showing but the lines through it.

|||| |||| |||| ||||
|||| |||| |||| ||||
|||| |||| |||| ||||​
So i changed the Color settings on the ATI tray icon from 16 BPP to 32 BPP. I've used the 32 BPP since.

But Call of Duty and CS: Source don't work. Wacked out glitch vanashing point in the middle of the screen drawing images away or to that point.
There's occasional screen blinks for 3 seconds.
My dell ball mouse isn't recognized all the time and my external harddrive is recognized 4 of 5 times when plugged in.

I've downloaded BIOS stuff and have probably muffed everything up by trying to install BIOS updates and driver stuff.

Please help
Thanks, Andrew A

Read other answers

I wrongly disabled my graphics card selecting "IGD" option in "Select active video" in the BIOS. (Before "Auto" was activated and the other option is "PEG")My computer model is Lenovo H530.I tried to reset the BIOS but I haven't resolved. Now I can't see BIOS options because it results as HDMI were disconnected.Probably I need to know how the BIOS is structured on a same model, so I can blindly set default options, since the pc is turned on and responds to keyboard commands.Help me! Thank you.

Read other answers

HI everyone, We had some Hp 8000 Elite Small form factor Business pcs deliverd to us by hp. It had W7 on and Nvedia NVS 300 graphics card installed besides onboard one. We wanted these pcs with an extra card for dual screens. We have 50 of them. We dont want all pcs to have dual screens but just a few. Once trying to image this pcs though our imaging server with a 8000 elite winxp image, we found that only the 2nd graphics card works. Onboard one doesnt. Once the extra card has been taken off , on board one works ok. I couldnt find anything in in bios ( like our old hp pcs ) to enable/disable the on board graphics card. Does any one know any bios settings in these models that will enable the on board card while having the extra one plugged but not installed ?  or any other suggestions ? Regards,Sheikh

A:Enabling Onboard Graphics card while having a 2nd card slott...

Hi, Sheikh: What you want to do, can't be done on these PC's. If there is a video card in the PCIe slot, the onboard video is automatically disabled, and that is that. Didn't the nVidia video card come with a dual head (DMS59) connector, or at least two video out ports of some kind (VGA and, DVI)?  You can hook two monitors up to that with different cables, and get dual monitor support. Paul

Read other 6 answers

I have ibm thinkpad R51 2887 nq2 series . My system has been crashed as it is not starting.The whole system gets hang after showing the first ibm screen. The bios utility setup is not getting opened through access ibm button . In safe mode it shows that system BIOS and video BIOS is not working and it has been shadowed.sometimes the system gets started ,but after one minute ,it stucks and the whole system paused and nothing happens.It may be the virus attack on BIOS and it also changes the time and date configuration of BIOS. so what should i do .And how i can install BIOS driver to the system.

A:Solved: system BIOS and video BIOS shadowed

Did you mark this "Solved"?

It sounds like you need a new CMOS battery.

Read other 1 answers

I just bought a new motherboard, powersupply, memory, processor and installed it and nothing happens the screen is blank, there are no audible sounds and all the drive lights stay on and the system won't turn off. I tried a different video card, and I unattached all the hard drives and cards hoping to at least see it go through bios but it won't do anything. PLEASE HELP!

A:new motherboard, video card, processor, not booting to bios

I had a similar problem and it turned out to be a bad stick of dimm.Might not hurt to try another, if you have one handy.

Read other 3 answers

Hello, i recently bought a HP ENVY h8-1437c, Windows 8, I replaced the (NVIDIA GeForce GT 620) With a (Sapphire HD 7770 1GB GDDR5). I hooked up the 6 pin power and made sure that the card is seated properly multipule times.  On startup I get 6 long beeps along with the power LED flashing. Then a few seconds later the power LED turns blue and the PC starts up fine. The card seems to be working fine as well. I have played games on the max settings with no issues, where as before the GeForce card couldent do this. I was reading across the web that it might have something to do with the BIOS secured boot enabled, so I disabled it with no change, same 6 long beep then the PC starts up fine. I guess my question is, is this okay that it beeps? Is it causing any internal issues? The only things I have done so far are adding the video card software, disabled secure boot (using the old GeForce card to get into BIOS) and reseat the new vid card/6pin power wire. Thanks for the help and let me know if you need more info. Here is the link for my computer specs just in case.  http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03517380&lang=en&cc=us&taskI... -Micah

View Solution.

A:6 Long BIOS beeps after video card install

Hi Sarge1D, Go back into the bios and switch from UEFI mode to Legacy mode. There might be a slight incompatability between the Sapphire video card and the HP bios. Post your results. As side note:  I suggested in a post a while back that HP do exactly what you are experiencing to allow video cards that have a vbios function difference compared to the bios in the HP PC (beep 6 times as a warning but allow the PC to boot).  

Read other 10 answers

Replaced dead videocard with msi HD6450 and machine won't boot. Tried old card I had laying around and it works fine. My searches have turned up questions about BIOS / UEFI compatability problems but no solutions. This is the second card I've tried, I sent the first one back assuming the problem was with card.Motherboard: Angelica 1.2CPU: AMD FX-8150Bios: Ang_716      4/5/2012The original card was a GeForce 8500GTThe card I'm temporarily using is a GeForce 9300 GE 

Read other answers

HELP.   I had to reset the bios on my HP Envy H8-1534 desktop but I don't have the original display card....It was stolen (grrr.)   What can I do?   It won't work with my Nvicia unless I can get into bios and enable legacy support.

A:H8-1534 Had to reset BIOS but don't have original video card

There is no onboard video so you have no choice other than to purchase and install a PCIe-x16  gen. 1 or gen. 2 video card. I suggest purchasing an ATI Radeon video card that does not have power requirements exceeding 450 Watts. CHeck the manufacturer's website before purchasing a video card to ensure that.  Check the power supply connectors to see if there is a PCIe six or eight-pin power connector. You may have to purchase an adapter if the replacement video card requires a PCIe power connector.

Read other 7 answers

Just had a pc built. First, they did not give me what I paid for: exchanging the parts I ordered and paid for with inferior ones. Made them fix it. [They did not know that I do the pc's at work.] Now?...my AMD Athlon 2500+ w/ASUS 333 was set wrong in BIOS: 1100 at 100/33 [easy fix]. I run Win 98. They say 98 cannot recognize the speed, reason for the Bios' low setting. [Funny, it works fine on all the systems I set up at work.] Then my DVD burner is recognized as a CD-R/RW and does not play nor record DVD's. Dr Hardware recognizes it as a Samsung CD-R/RW as well. None of the DVD software I use works. Also, the Radeon 9200 they sold me, which normally is a decent card, causes the system to freeze MANY times consistently, but they claim it's a "software" issue. Tried it on another pc with the same results. Used a video bench test and it froze on both pc's. It has never froze on several other systems I had set up prior to this. If the problem is at my end, what could I be doing wrong?

A:Bios settings? dvd burner?, video card problems?

sounds like a good place to avoid
i would be dumping it on their counter and aking for my money back,if you paid by card ask the bank to put a hold on payment till they supply what you paid for

Read other 2 answers

I don't have the option in my BIOS to enable Virtulization (enabling VT-x in BIOS). I have a HP Slimline Desktop - 450-a160. I've run a cpu scan and it does support it. But the BIOS has very limited settings. I tried updating the BIOS to: Rev.A But that didn't help. Please advise, I really need to get this too work.

Read other answers

I bought a new computer and have been trying to enable AGP through the BIOS, but the option isn't there.
I've updated the BIOS to the latest version and still no option for enabling AGP.

Anny help would be appreciated on how to enable AGP.

Thanks in advance.

(Intel i865PE <-- Mobo chipset)
(AX4SPE-UN <-- Mobo)

A:Enabling AGP through the BIOS

Please don't start duplicate threads for the same problem, this is closed as a duplicate, you're original is at the link below. Thanks ...


Read other 1 answers

windows xp home edition .my computer is a fujitsu siemens scaleo p d1740.2.80 gigahertz intel pentium 4
199.63 hard drive free space,Maxtor hard drive 250 gb.samsung 40 gb.intel display adapter (not enabled) nvidia geforce 6200 (enabled.
8 kilobyte primary memory cache
512 kilobyte secondary memory cache
760 megabytes unstalled memory
slot DIMM 1 256 mb
slot DIMM 2 512 mb
C: 250 gb
d: 40 gb
recently had a sound problem(solved)but while trying to fix the problem I reset the bios to default.since then when I connect to my nvidia 6200 it just shows a message` input not supported`.I was told that I need to enable agp in the bios.I have seached the menus but cannot find anywhere to do this.in avanced I found an agp aperture setting which I have tried changing.no good.
hope some one has the answer `cos Im stumped thanks on anticipation
playbub (frank)

A:enabling agp in bios

Hi Playbub
'input not supported' would normally indicate that either the resolution or the frequensy that you have set for the card are not supported by the monitor, you can check this by starting in safe mode or in vga mode, in these modes you computer will start with the ms default drivers and settings

Read other 1 answers

Apparently I'm only running my USB 1 ports because I keep getting these "This USB device can perform faster, click here to find a high speed USB 2.0 port" messages.

After an extensive search I've come across this, http://www.techsupportforum.com/har...p4s533-x-how-upgrade-usb-1-0-ports-2-0-a.html
Apparently this link solved someones problem, it says I need to go into BIOS and enable S1, or enabling the USB 2 somehow. But I can't seem to locate where to enable S1 or any other High Speed USB. How should I go about locating this? Your guidance would mean so very much. Thank you.
Windows XP sp3
Asus P4S533 motherboard

A:Enabling USB 2.0 in BIOS

John - I'm not familiar with your motherboard or BIOS, however my first suggestion would be to head over to the ASUS website (http://support.asus.com/download/download.aspx) and download updated drivers. There's an update under the Utilities category called "Microsoft KB817900 USB fail to enter S3 patch file for Windows XP." Try that.

I would also make sure that your BIOS is the most recent version.

Let us know if that corrected the issue.

Read other 1 answers

Help. Newbie installing a video card.  Have old H530. Updated PSU to 500W. That works fine. when installing GeForce GTX 1050... get nothing but black screen.  Disabled integrated video drivers but still black Screen.  Compatibility issue?  BIOS settings?  Help please.

Read other answers

Lately, I have installed 2x 4 GB RAM sticks into my HP Slimline s5-1200z a few hours ago, however, upon doing this, my graphics for my games have been messing up, and sometimes my AMD video driver will crash, causing major annoyance when trying to play any games I intend to play. When I downloaded an application called Portable SIW, I noticed something quite alarming, as shown in the picture below, circled.

Here is a second picture for reference.

And for another reference.

Any possible reason for this to occur? Thanks if you can help.

A:BIOS reports wrong values in RAM, crashing AMD video card

Well; since you are saying the bios is reporting wrong values; you probably should check your system board "builders" site to check for any bios updates that may hopefully correct this issue. If not; also check the ram modules one by one to make sure non of them are bad and that none of the ram slots are possibly bad. Take all ram sticks out and put one at a time back in and see if you can pinpoint the issue.

Read other 9 answers

I need Asus translation for these.

Assign IRQ to VGA
PnP O/S Installed
PCI Bursting / PCI Latency /Peer Concurrency
Video Bios Shadowing
Video Ram Cacheable
Pipeline Cache Writes
PCI 2.1 Compliance
Passive Release
Delayed Transaction
VGA Boot Sequence
Graphi Aperture Size
AGP Turbo Read Mode
AGP Turbo Write Mode

Since I Have a AGP running 4 X do I disable anything with PCI

Also where do you find these in the bios. Seem a lot a features are hidden?


A:Need bios setting for Asus P4S333 for fx 5700le video card 128 bit /AGP

Definitions and BIOS

Much faster to right-click, download it, and save it to your comp... then open it....

: Since I Have a AGP running 4 X do I disable anything with PCI

Not that I know of... if you are trying to get a 4x/8x video card working on this mobo, I'm still trying to figure this out... gonna flash the BIOS tommorrow and see... here's the link to that discussion, and my reply:


: Also where do you find these in the bios. Seem a lot a features are hidden?

There's the link to the newest BIOS for this mobo.... should open up more than what you can access....

: Thanks

Your Welcome =P

ABIT KD7/KT400 Mobo, AMD Athlon XP 2500+ overclocked to 3000+ specs, 1 Gig 333mhz DDR RAM, Gainward Ti4800 Vid Card w/128 Megs RAM, 40 Gig Internal 7200rpm HDD, WD 80 Gig External USB 2.0 HDD

Read other 1 answers

I've been using Kaspersky Total Security with a Microsoft 7 Operating System.  I recently upgraded to Microsoft 10 and Kaspersky's "Safe Money"feature is unable to provide complete security protection for managing my financial matters, e.g. bank account credit cards, etc.     Kaspersky technical support indicates the issue is enabling the visualization within the BIOS, and recommended that I contact HP, the manufacturer of my PC for assistance as this falls outside the scope of Kaspersky support.  Additionally, is this a software rather than a hardware issue? Of course my device is no longer under warranty,  so I do hope someone can be of assistance. Many Thanks

Read other answers

I got an emachines computer last year, and it came with onboard video. I bought a PCI card, and it worked just fine. I was looking for an upgrade, so I got a new AGP card. The computer will not pick up the card (and yes, it has an AGP slot), and nowhere in the BIOS can you enable AGP. Looking for a new BIOS seems to lead me in circles from site to site...and I'm not really knowledgeable when it comes to messing with the BIOS.

I can hopefully give more information if needed...but at this point I don't really know what to post to help anyone.

Chipset : Intel i845GE
Mainboard : First International Computer, Inc. (VG33)

Manufacturer : Phoenix Technologies, LTD
Version : IEX423EM
Date : 27 May 2004

Any help would be MUCH appreciated.

A:Help enabling AGP with a very limited BIOS.

In most modern mobos, just putting in that AGPcard automatically disables the onboard video.
Worth a shot. If that does not work, see if there is a jumper on the motherboard to disable onboard video.
Question: how did you get the PCIcard to work? Try the same for AGP.

Read other 5 answers

I got a dell uniplex gx270, and it won't boot from the dvd-rom drive, i went to the bios menu and i can't change it. It seems that anything in blue (not white) lettering will not respond to input. Only the hard disk seems to be enabled, and i don't know the password i wanted to install a new O.S. but can't without the rom drive working. thanks for all help

A:I need help enabling options in the bios, please

You may need to replace the cd drive

Read other 11 answers

I want to test Intel SGX technology on my Lenovo Tower S510 10L3-000JFM. I checked via https://github.com/ayeks/SGX-hardware that my CPU Intel Core i7-6700 supports SGX but BIOS does not, or may be not enabled (in BIOS). A BIOS update can fix this. However, a recent BIOS update from Lenovo in https://pcsupport.lenovo.com/us/en/products/desktops-and-all-in-ones/lenovo-s-series-all-in-ones/s51... does not explicitly specify that as I do not want to proceed to this risky operation without being sure. My question is: is this BIOS update supporting Intel SGX? Or not? Any help or resources are welcomed. Last BIOS update is on 01/09/2016 and last CPU microcode update is on 07/01/2016.

Read other answers

My processor intel cpu a1018 supports viruailization and I tried in many ways to enable it. But I cant find VT enable option.  Help me.

A:Enabling VT in bios for HP 246 Notebook PC

i have also searched intel for this processor details it is mentioned that the a1018 processor has hardware virtualization technologybut i too cant find an option to enable VT in BIOS Is there any way to enable it??probably can i obtain the feature by changing my BIOS??if possible any suitable BIOS suggestion??? 

Read other 1 answers


Read other answers