Over 1 million tech questions and answers.

E-mailing using Microsoft Word

Q: E-mailing using Microsoft Word

I tried sending an e-mail in Microsoft word with the e-mail icon on the quick toolbar, couldn't send it and couldn't close Word. I got this message:
"This error can occur if you try to send a Word document by using the Email ( Microsoft Office Button | Send command) command. If Word hangs, or you closed Word and a new message dialog does not appear, it is possible that Outlook did not receive the request to start a new message.
To avoid this issue, restart Word and attempt to send the attachment again, but wait for Outlook to respond prior to attempting another action.
You cannot close Microsoft Office Word until the Send Mail Command is finished. Switch to the New Message first, and either send or close the message". I had to manully close down my computer, then restart it. I can use all my programs but everything is different, and Outlook background is grayed out.
Can you tell me how I can correct this problem?
Thanks

RELEVANCY SCORE 200
Preferred Solution: E-mailing using Microsoft Word

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: E-mailing using Microsoft Word

Read other 8 answers
RELEVANCY SCORE 75.2

Please where can I find mailing tab on microsoft word 365?

Read other answers
RELEVANCY SCORE 56.8

Hi everybody,
In Word 2000 there is an e-mail-button. How is that supposed to work? When I click it, I get the email address lines and so on at the tip of the screen. When I click the send button, Word (or some other program) immediately tries to send the mail, and complains, since there is no Internet connection open. If I click the send button once again (being stubborn), it starts to dial my default dial-up connection, but without the password, although Outlook Express and Internet Explorer always remember the password.
Can I get Word to put the mail in the outbox of Outlook Express instead of trying to send it immediately. Or, can I get it to remember the password, if it has to send it immediately.

When I looked in the Word help, it seemed more normal to combine word with outlook 200 than with Outlook Express. Does it make sense at all to try to use Word and Outlook Express together? Maybe it is better to simply write the e-mail message in word 2000 and then cut and paste it into Outlook Express?

Regards
Mats Westholm
 

A:E-mailing from Word 2000

Read other 11 answers
RELEVANCY SCORE 56.8

I am running MS Word 2010. Here is my problem.

Letís say I type a letter and have the personís name and address in the letter. On the Word menu bar I select labels. For some reason when the label prints, it is center adjusted and not adjusted to the left like a normal mailing label would be.

Any thoughts on how to fix this.
 

A:Mailing Labels in MS word Help

double check that your left alignment is selected on the home ribbon.
 

Read other 2 answers
RELEVANCY SCORE 56.8

I created a word document to send around to my co-workers for editing, the problem is it can not be edited. The way it is being sent is file send to mail recipient, not in the form of an attachment.This is my work pc and we are running XP. I hope this is enough information for this is my first time here.
Thank you.
Core Man
 

Read other answers
RELEVANCY SCORE 56.8

Hi,

Does anyone know how to create labels in MS Word. I would need to instantly email or fax it but have know clue how to create the labels in such a way that it can be easly emailed or fax from my pc. I would appreciate it if anyone out there can help me cause I really need to do this asap.

Thanks to all.
 

A:MS Word Mailing Labels

Are you using some special labeling paper? I'm assuming it's a sticky label on one side. There should be instructions on how to do the File>>Page Setup... Then choose your appropriate type of paper. For the labels it should create a large table where you can input the many different addresses.
 

Read other 3 answers
RELEVANCY SCORE 56.8

I have a address book set up in Phone Tools and would like to merge it into Word to create mailing labels. Or I could recreate my address book in Word and make labels from there. I cannot figure out how to do this. Any help would be appreciated.
 

A:Word mailing labels

Hi there.

How to do a mail merge in Word?
Click on the link for Mail Merge at www.theofficeexperts.com/word.htm
 

Read other 3 answers
RELEVANCY SCORE 56.8

I searched a little bit, I didn't see it:

How do you shut off a Word document before sending it so the receiver of the document cannot back-track and see any changes you made to the document before sending it ?

I hope that made sense, but I read something about a year ago that said if you e-mailed someone a Word Document, that they may be able to pull that document into their system, and simply use the 'back' key to show any changes you made to the document before you sent them the version you saved as the final one.

Am I making sense ?

There is a way to shut this off so they cannot do that, I just don't recall how.
 

A:Shutting off changes to a WORD Doc before e-mailing it ?

http://office.microsoft.com/en-au/help/HA010983881033.aspx
 

Read other 2 answers
RELEVANCY SCORE 56.8

Setting up Word 2000 so as to e-mail from Word. I get my e-mail from MSN and read it from Hotmail, Outlook 2000, or Outlook Express.

Thanks
 

A:E-mailing from Word 2000, How to set up

What happens when you hit File-Send to, Email recipient?

Is this what you're trying to do or fix?

Do you want Word to be your email editor?

Or what?

Your question isn't clear---sorry!

Is that Old CWO4??

That makes me OldE4?
 

Read other 3 answers
RELEVANCY SCORE 56

I have attempted to create mailing labels using Word 2003. I used a prior Word version several years ago and was able to save the labels as a file--ready to print, not requiring database. Any ideas how to do this with Word 2003?

Thank you for your help,
Brian
 

A:Word 2003 Mailing Labels

Were you doing a mail merge? You can save the lables as a template as long as your data source for the mail merge is consistent.
 

Read other 2 answers
RELEVANCY SCORE 56

Hi there

It's been quite a while since I asked for help. I can easily create mailing labels using Mail Merge. The data source resides in Excel. I automated the mail merge process by recording a macro in MS Word 2000. When I ran the macro it did exactly what I keyed in. I looked at the macro, which defaulted to Macro1, by going to Tools-Macro-Macros. The macro was there. I saved the Word file as Labels.doc in my C drive. I also saved the other file that had the fields in one sheet. You know the one that I mean.

Here is the problem. I e-mailed the 2 MS Word files and the Excel file to my co-worker. My coworker saved the 3 files into his C drive also. When he tried to run the macro, it did not work. As a matter of fact, when I went to Tools-Macro-Macros to see what went wrong, my Macro1 was not there at all. When I e-mail an Excel workbook with macros to anyone, the macros are attached to the workbook but this is not the case with macros recorded in MS word. How can I get around this??

Mario
 

A:Mailing Lables in MS Word 2000

Read other 14 answers
RELEVANCY SCORE 55.6

I want to do a mass mailing using the Word application of Vista. I have created the Address Database - correctly, so far as I can tell - at least it works to put the salutation on the letters. In addressing the envelopes I place the cursor where I want the Address Block to appear but in the execution of the address only the 1st line (the name) of a 3-line address appears there. The street and number and the town appear near the left edge of the envelope and the ZIP code appears near the right edge.

Thanks for your thoughs.
 

Read other answers
RELEVANCY SCORE 55.6

How to export mailing labels from Word 2010 into Excel 2010 to upload to USPS for bulk mailing

A:Export mailing labels from Word into Excel

Welcome to Windows Seven Forums.

This MS website may help you, but it does seem fairly complicated.

Create and print mailing labels for an address list in Excel - Excel

Read other 3 answers
RELEVANCY SCORE 55.6

When trying to create a 30 label sheet from a .wdb file, WORD (Office) says it can't merge from this file. Please verify that this is a valid Works file.
At Open Data Source I call on my .wdb file and am blocked by the above message. I'm using Works Suite 2006 and Word 2003.
I can't get past that point.
 

A:Solved: Mailing labels - from database to word.

Read other 6 answers
RELEVANCY SCORE 54.4

i just went from windows 2000 to windows 7 professional and we had to reinstall all programs....
problem:
i need to open my company logo which was saved in microsoft office word 97-2003 - my new program is microsoft works word processor - i have tried saving it in different formats on my old computer but nothing seems to be working....
any suggestions?
 

A:Converting files from Microsoft Office Word 97-2003 to Microsoft Works Word Processor

Read other 6 answers
RELEVANCY SCORE 54.4

In Word can I set up a batch file to print envelopes from a master address list, and only choose the addresses I want, as well as the quantity of envelopes per address I want to print?
 

Read other answers
RELEVANCY SCORE 51.6

I have created in Microsoft Word 2003 on an XP OS some lengthy documents. I created them using a view setting of 150%.

I sent them to my employer, who is using Windows 98 and Microsoft Word 97. My boss opened them with his system and they displayed on the screen at a view of 200%. He wants me to send him Word documents that he can open from the CD-R that I send that will automatically display at 100% view on the screen so that he does not have to set the view for each document as it displays.

So what is the answer.

Is there a way that I can save my created documents so that when my boss gets them on a CD-R that they will open on his system at a view setting of 100%.

Is there also a way that his system can be set to default to 100% in reading from the CD-R.

My boss does not want to copy the documents to the system hard disk from my sent CD-R, preferring to read and copy directly from the CD-R that I send, so that the original documents will not accidentally be changed.

Any help would be appreciated.

A:Microsoft Word 2003 To Microsoft Word 97 View Setting

Welcome to BCWhat if he were to download Word 2003 Viewer?Mark

Read other 1 answers
RELEVANCY SCORE 51.6

Does anyone noe weather vista Microsoft word support the old formated ones? Or is there any plug-in needed to support?

A:Does Vista Microsoft Word Support Old Format Microsoft Word?

I'm assuming you're talking about the new office 2007? meaning word 2007?

If that is the case, then yes it does run older versions of word. In the sense that if you have a word document that was made and saved in Word 2003 it would work in 2007.

Just like when you make something in word 2007 you are able to save it as a Word 03-07 document so it works on both versions of Microsoft Word.

Read other 3 answers
RELEVANCY SCORE 49.6

alright my problem is that i have already used microsoft word 2000 for awhile now and its been fine, no problems whatsoever then about week ago it started doing a lot of crazy stuff when i opened it. this happens every single time. i open it and it states that
it is preparing to install microsoft word 2000 (i already have it installed) then it states that it must gather the required information. At first i thought it was an update so i decided to let it continue. when it was finished it said that "the feature you are trying to use is on a CD-ROM or other removable disk that is not availible. please insert the microsoft word 2000 disk and hit ok" alright the thing was it wasn't an update. and i couldn't find my word CD because it hasn't asked for one ever since i installed it. I then hit cancel and everything went away and about a minute later my microsoft word 2000 came up and it had no updates and was functioning fine but it was going about half the speed it usually does. Other than that there were no other problems and i continued with my work. The only thing that really bugs me is that this entire process takes about 5 minutes every time I start up... so its kinda of a pain... is there any way to get rid of this? thx to all... Peace Out
 

A:Microsoft Word is tring to install microsoft word again

Read other 6 answers
RELEVANCY SCORE 49.2

Windows XP Professional Service Pack 1 with office 2002 plus Outlook 2003 installed, Exchange 2003 is being used as the e-mail server.

When I do a mail merge from Word 2002 to e-mail for a mass e-mailing in Outlook 2003. The process completes but there are no e-mails sent from Outlook 2003. The e-mails that were merged are never recieved by the recipents that are being set to. Help.
 

Read other answers
RELEVANCY SCORE 47.6

Lets say the last time I used 7 labels from my sheet of 30 labels. Now I want to use up the left over 23 labels on my avery label page.

Can I do this in Office 2007? Like somehow start printing at label 8 on the sheet?

Thank You,
Michael D
 

Read other answers
RELEVANCY SCORE 46.8

I remember having deleted my Microsoft Office 2007 trial and now I can't find some of my previous word documents that I remember saving on my computer.

Is my suspicion true?
 

A:Does installing Microsoft Word 2007 delete word documents?

saiz said:


Is my suspicion true?Click to expand...

I don't think so. Try installing OpenOffice.org 3.0 and you'll be able to open those files.
 

Read other 2 answers
RELEVANCY SCORE 46.8

I got the new version of word today on my brand new computer and I need a word processor for my job, and its not letting me pick it as my default one. When I go to the control panel and try to do it from there, it still doesn't pick it up. Why is this happening and how can I go through and change it?
 

A:Solved: Microsoft Word 2010 not my default word processor?

Read other 16 answers
RELEVANCY SCORE 46.4

I have Microsoft Office 2003 installed and also the Microsoft Office Compatibility Pack 2007. However, when I receive an e-mail with a Microsoft Word 2007 attachment, the document will not open even with the Compatibility Pack installed. I can not convert .docx to .doc. Any advice please?
 

A:Microsoft Outlook 2003 - Attachments in Microsoft Word 2007 will not open

Hi again,

Anybody able to help me with this please?
 

Read other 3 answers
RELEVANCY SCORE 46.4

Hi

Here is a strange one. I have Microsoft Word 2000 on a computer running Windows XP SP3. I just began having a problem opening documents directly in Word. The documents will open but they are not right. For example, I have a document that is passworded out. Within Word, the document will open, but it does not ask for a password, and the contents of the document come up scrambled. Here is an excerpt of what it looks like:

+??+??7k'?p%V9
q|?F
t?Uzjikvn?nnU
b*79g?CAg?
t???c\0B?~I?_sD
l%*~tL
T,?*O?>.???l?C?
Ab/hA>[S?

This goes on for 20 pages.

However, if I go into Windows Explorer and open the document by double clicking on it there, it correctly asks for the password and opens fine. Weird, no?

I tried opening other documents from Word that do not have passwords. They open, but the documents include a bunch of formatting instructions that usually remain hidden. But from Windows Explorer they open fine. Here is an example:

Document opened with Windows Explorer

Blaine
Blair
Brody
Bryce
EVAN: English form of Welsh Iefan, meaning "God is gracious."
Lucas
Quentin
----------------------------------------------

Same document opened from within Word:

Blaine
Blair
Brody
Bryce
EVAN: English form of Welsh Iefan, meaning "God is gracious."
Lucas
Quentin

Normal
Normal
Default Paragraph Font
Default Paragraph Font
Hyperlink
Hyperlink
aC:\Documents and Settings\Doug\Application Data\Microsoft\Word\AutoReco... Read more

A:Microsoft Word - problem with opening docs in Word

I would be hard to tell with your infection
You have an open topic in the HJT forum. You really should not make any changes until you are done there

Read other 3 answers
RELEVANCY SCORE 46.4

Hard to explain but here goes:

When I have a sentence that I want to move to the middle of the page, I place the curser to the left of the word and try to push it right by hitting the space bar and nothing happens.

This is only when the word is all the way to the left of the page.

Is there some type of formatting that would allow this to be free so that I can push words forward??
 

A:Microsoft WORD - Can't get word on left side to space right

Read other 9 answers
RELEVANCY SCORE 46.4

Running Win XP on a home built Intel Core 2 duo platform. Just started within the last week or so. I can open the software from the CD, but not from my hard drive
 

A:Can't open Microsoft Word Program or Word documents

Read other 10 answers
RELEVANCY SCORE 46.4

After recent full system recovery caused by one or more virus, I am unable to re-install Microsoft Word or Word Perfect on my Compaq Presario, which has Windows XP. Microsoft Word will sometimes start the process but then just stops, giving no indication of what steps to take next or what the problem is. Word Perfect seems to start the process each time but then gets hung up with updating what it describes as the SHFolder.dll. Have waited as long as 20 minutes for this update. The screen does show activity but it just never seems to get done. I cannot take the installation process past that point.

Any suggestions on how I can correct or cure this problem?
 

A:Unable to install either Microsoft Word or Word Perfect

Check here: http://support.microsoft.com/kb/q303437/ for some help - probably the .dll is either corrupt or the path not recognized. Depending on whether or not this page helps, either fix it with that or lookup SHFolder.dll. on the net and download a new copy from somewhere like http://www.dll-files.com/dllindex/dll-files.shtml?shfolder and install it.
 

Read other 2 answers
RELEVANCY SCORE 46.4

Hya everyone. I hope i am in the right forum. Could someone tell me how to change a letter in Microsoft Works processor into word format. My son is trying to email his c.v. to companies and agencies but got a letter from a couple stating unable to open file attachment please email in word format. We do not have microsoft word just microsoft works.

Thanks
Dave H
 

A:Microsoft works word processor to word format

Check this Microsoft page and see if helps.
 

Read other 4 answers
RELEVANCY SCORE 46.4

Here's the Microsoft Download of the utility that will prevent booby-trapped word [.rtf] files from infecting your computer.
 

A:Microsoft Fix It Tool for Disable opening RTF content in Microsoft Word

Applies to

Microsoft Word 2013
Microsoft Word 2010
Microsoft Office Word 2007
Microsoft Office Word 2003
Still no word from Microsoft regarding if it affect WordPad.
 

Read other 2 answers
RELEVANCY SCORE 46.4

I need help uninstalling an add-in to Microsoft Works Suite 2006. I downloaded a program that helped me remove the actual program, Microsoft Works, but the add-in is still stuck and I can not for the life of me get this add-in to unisnstall.. This hole thing has been causing me problems for sometime now, it keeps making my WIndows Installer pop up flashing on the screen about fifty percent of the time I'm on my laptop. I have windows 7 if you need that information, I realize now the program has compatible issues..I finally got the program gone someone please help!! It is call Microsoft Works Suite Add-In for Microsoft Word.
THANKS!!!!
 

A:Help Uninstalling Microsoft Works Suite (2006) Add-In for Microsoft Word

Read other 7 answers
RELEVANCY SCORE 46.4

Hi, I have an access Database that has a form wich contains 2 OLE Object fields in one I use it to paste a link to an excel field and the other field I use it to paste a link to a word document. This is running under windows 7 and office 2010. Every was working fine. I had to change my notebook harddisk and mother board. After this I reinstall windows 7 and office 2010. The problem that I have is the following: When I double click in the excel link it works fine an open my excel file. When I do the same with the word link I got the following message (translated because I have my notebook with spanish language "Error during an operation over an Object Document. It is possible the OLE Server is not registered. To Register it, reinstall it" Its very extrange because my database worked fine before I reinstalled windows and office and the thing the it works fine with the excel link but not with the word link. Please if anyone have and idea of what is going on??? Thanks a lot in advance for your help.
 

A:Issue linking to a Microsoft Word document in Microsoft Access

Welcome to TSG jcantini,
Since no one is offering any thing here I'm going to suggest you save the document in the current version of word and reistablish/rebuild the link. I suspect this is an older version of access running with office 2010? mdb file type?

If you google "the ole server isn't registered access 2010" there are tons of confusing suggestions out there! Good luck..
 

Read other 2 answers
RELEVANCY SCORE 46.4

I recently purchased an ASUS Windows 8.1 64 bit computer.  I transferred my Microsoft Works Version 8.0 word processor and spreadsheet files from my old computer onto the new computer.  I just purchased the Microsoft Office 2013 Home and Student Edition (64 bit version) from an online vendor and installed the software onto my new computer. 
 
I have no problems opening my Works spreadsheet files in Excel.  However, when I attempt to open a Works word processor file in Word, I get gibberish.  I did some research online and found out that there is a Microsoft tool called Works 6-9 Converter which allows one to open Works files in Word.
 
I downloaded the Works 6-9 Converter tool from the Microsoft Support website and installed it on my PC.  However, when I subsequently attempted to open a Works word processor file in Word, a dialog box appeared with the error message "Word cannot start the converter Wks9Pxy.cnv" and the file did not open properly (i.e., I got gibberish).
 
I did a little more research online and found out that uninstalling the Works 6-9 Converter, then downloading and installing the Microsoft Visual C++ 2008 Redistributable Package, and finally reinstalling the Works 6-9 Converter may correct this problem.  I followed these steps, but unfortunately when I attempt to open a Works word processor file in Word, I get the same error message and the file does not open properly. ... Read more

A:Cannot Open Microsoft Works Files in Microsoft Word 2013

http://support.microsoft.com/kb/315757
 
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/i-cant-open-any-of-my-microsoft-works-documents/c242b6da-3292-4d7d-8689-9a554ecb7171
 
http://www.computerhope.com/issues/ch001017.htm
 
Reboot after any changes you make.

Read other 3 answers
RELEVANCY SCORE 45.6

Can anyone help me out?

I click on microsoft word to try and open it and it doesn't even make an attempt to open. My word files also won't open. They are there, but just don't open.
Any ideas??

Thanks in advance!
~Rob
 

A:Microsoft word and word doccuments won't open

May be virus problem
 

Read other 2 answers
RELEVANCY SCORE 45.6

I am a 3rd year university student studying Forensic Science and i have to admit im not much of a writer and these long essays absolutly kill me...i spend so much time bringing up the word count window (time i probably should be spending writing). my question is...is there any way of having a word count always on the screen counting as i go?

does anyone know if this can be done...if so how?

please let me know if i need to download something (and where to get it) or what settings i need to change in word if that needs doing.

Many Thanks
 

A:Microsoft Word 2003 word counter....

View->Toolbars->Word Count

You still have to click the recount button though.
 

Read other 1 answers
RELEVANCY SCORE 45.6

Is there a way to count the number of occurrences of a word in MS Word?

If not, is there a downloadable text editor or something that can do such a thing?

Thanks.
 

A:Counting occurrence of a word in Microsoft Word?

Replace the Word with something like QQQ .. or the the original word .. And it will tell you how many.
Then you can replace it back to what it was ... or just don't save the edited file.
be sure to include the spaces before n after the search word.
 

Read other 2 answers
RELEVANCY SCORE 44.8

just deleted micorosoft works and installed microsoft word(office) BUT now i cant open my old works documents? I have read alot about this but just wanted to check here before i did anything. Im sure i know what to do but just wanted to see what other methods are suggested? thanks!

A:microsoft works document to microsoft word?

What version are you using?

e.g. for 2003:

http://office.microsoft.com/en-au/word-help/convert-works-documents-to-word-format-HP001188116.aspx

for 2010:

http://office.microsoft.com/en-au/starter-help/move-from-microsoft-works-to-microsoft-office-2010-HA010337946.aspx

Read other 1 answers
RELEVANCY SCORE 44

Doing a fix for a friend, and this is a new one for me. Her primary concern was that all of a sudden, when she opens word, she can not type anything in a document. I tried it, and nothing happens. It opens like normal, and when you try to type, it is like the keyboard is locked out.

I found a few things on google that I tried to no avail. There was a .DLL patch I did, and I also removed so registry keys.

It is Win XP home, with 256 ram, and a P4 1.7 Proc. The version of word was installed with a software bundle that included Microsft Works.

I uninstalled Word, and reinstalled Office 2000 PRO, and the same thing is happening...

Any help would be awesome.

Parm
 

A:Microsoft Word..I cannot type anything on Word doc

Find and delete all occurrences of Normal.dot on the system.
It sounds like the one in use is corrupt.
A new one will be created when word next runs.

Do not have Word open when you search for and delete normal.dot. Enable the viewing of hidden and system files to see it.
 

Read other 2 answers
RELEVANCY SCORE 44

Dear Forum,

I'm just starting to learn about Microsoft Word 10, which was bundled within an Office 10 package. I'm noticing that as I type a document, the Word Count dialog box at the bottom left remains frozen at 0. When I right-click on it, it opens, but the Word Count is checked within it. So, it's not turned off or anything. I need to limit what I'm writing to a certain number of words. I have to complete this thing within the next day or so. Unexpected need for a troubleshooting solution.

Why isn't my word count going up? And the Characters seem stuck at 67. Maybe I clicked something I shouldn't have. Otherwise, I need some guidance here. Thanks. Steve
 

A:WORD COUNT IN Microsoft Word 10

try hitting 'save'....that should reset the word count.
 

Read other 1 answers
RELEVANCY SCORE 43.6

Hi guys, first off I haven't been here for help in years literally this was the first place I thought of because a few years ago many generous people helped me solve my problem, this place is awesome. Please pardon me as I am only decently literate with computers but try my best.

Ok I am trying to solve an annoying problem for my parent's computer. My dad was typing a normal document in Microsoft Word (OS is XP with System Pack 2, and it is Word 2002) and he said that just yesterday for the first time, after typing for maybe a half hour, a window would pop up with a "runtime error" and it would freeze untill he clicked ok on it, and it would then shut down loosing all his work that he didn't save.

So I got on the computer and opened Microsoft Word, and was able to duplicate the problem time after time but not every single time. When I simply open word, then click to close Word, the box appears, and he verified it is the same box he saw. It says exactly as follows, no more, no less, and every time reads the same -

Microsoft Visual C++ Runtime Library
Runtime Error!
Program:C:\Program Files\Microsoft Office\Office 10\WINWORD.EXE
abnormal program termination

So I tried to research it, and came across a fix on Microsoft's support site saying remove something called COM Add-ins. I did so by following each step removing the one COM add in i found, and it did not resolve the problem at all. It still errors out. SO I grabbed the master disk and un... Read more

A:Solved: Microsoft Word keeps throwing up "Microsoft Visual C++ Runtime Library" Error, Arghh!

First, welcome back!!! (although, vaguely, it's like seeing your cousin after many years at a funeral...nice to see you, sorry about the circumstances....)
Well, this isn't fun - the more I looked, the more "answers" and causes I found...
http://en.allexperts.com/q/Microsoft-Word-1058/Microsoft-Word-29.htm
http://support.microsoft.com/default.aspx?scid=kb;en-us;835404
http://support.microsoft.com/?kbid=555220
(I think you probably did what the above is about - COM add-ins)
and two that seem similar, but aren't the same (good ol' MS!)
http://support.microsoft.com/kb/259413/
http://support.microsoft.com/kb/921541/en-us

Good luck and let us know if you get this fixed - and what did it!
 

Read other 3 answers
RELEVANCY SCORE 43.2

I have decided to try to fix a problem on my computer with the Microsoft Fix It thing that Microsoft lets us use. Unfortunately, it not only did nothing for my problem (Which I no longer care about), but it did something to Microsoft Works Word Processor, the one that comes with windows. I already tried a system restore, but I've had it for too long so my restore didn't go back far enough.

The error itself says, "Works cannot access one or more files it needs to run the Word Processor. The files may have been renamed, deleted, or moved. Try reinstalling Works, and then starting the program again." Unfortunately I don't know if it has actually been moved or deleted and I don't know how to reinstall it. Any help would be great.
 

A:Microsoft Fix It messed up Microsoft Word.

If it came with Vista, it may be in Control Panel>Programmes and Features with the Windows Components list opened. You might be able to repair it that way. Failing that, if you had a Vista DVD or made a recovery set of your own, see if that can help.

 

Read other 1 answers
RELEVANCY SCORE 43.2

I have an index card in word that has cutoffs when i print on the start and at the end of the words.
 

Read other answers
RELEVANCY SCORE 43.2

I have an index card in word that has cutoffs when i print on the start and at the end of the words.
 

A:Microsoft, Help on Microsoft Word Document

It sounds like your margins are too narrow for the printer. Try adjusting them.
 

Read other 1 answers
RELEVANCY SCORE 42.4

hello every one

my sister done 10 pages for her course work and she alway save it on her memory stick.
but some how, when she try to save it this time it doesn't work and the the microsoft word file turn to notepad file and when she open it, it came up with lot of question marks, i hope there is a way to convert it back into words

thx for reading and help is needed

this is the corse work>>> Rescued document.txt

A:Microsoft word file turn to notepad file with non word text

any responses here?

Read other 1 answers
RELEVANCY SCORE 42.4

Hi,

Recently, I'm having slow file loading while opening ms word files and excel files directly from windows explorer. It takes a minute to load, however it opens immediately if I open .doc files or .xls files directly from their application software. It also take a minute for MS Word and Excel software to shut down.

I have run my antivirus (Symantec) and MBAM but they all show no virus was found. I'm not sure what should I do next, please advice.

A:Microsoft Word & Excel - problem with opening files in Word and Excel

What version of Word & Excel?

Read other 6 answers
RELEVANCY SCORE 42.4

Hello.

I was trying to configure Word 2000 to send email, but I can't seem to find the means to configure the bloody thing. I have tried help files, but wasn't much help.

Anybody plz?

Thanks.
 

A:Microsoft Word 2000 aka MS Word 2000 - Sending Email - Need Help Configuring

Word itself does not send (or receive) e-mail messages. You may configure Word to be your e-mail editor, but it still requires an e-mail program (such as MS Outlook) to send messages.

You can send e-mails from within Word by using File, Send To, Mail Recipient (or Mail Recipient as Attachment), but this still uses Outlook to do the sending and receiving.

Gram
 

Read other 1 answers