Over 1 million tech questions and answers.

Multiple BSODs after booting from hibernation in morning

Q: Multiple BSODs after booting from hibernation in morning

My Win7 Ultimate X64, on an E6510 pc experiences most the BSOD after it has booted in a morning after being hibernated the night before. The details of the BlueScreen description is:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: d1
BCP1: 0000000000000090
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF88002FC2353
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
thank you,
Kevin

RELEVANCY SCORE 200
Preferred Solution: Multiple BSODs after booting from hibernation in morning

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Multiple BSODs after booting from hibernation in morning

Hello Kevin and welcome to Seven Forums.

Couple of things I'd like you to do that will help this Forum help you.
1. Fill in your system specs so all info is in one place.
System Info - See Your System Specs
2. Set up your machine to generate dump files.
Dump Files - Configure Windows to Create on BSOD
3. Follow the BSOD posting instructions.
http://www.sevenforums.com/crashes-d...tructions.html

Each BSOD generates a specific error code or stop code that tries to identify the underlying cause(s). Multiple BSODs can each be caused by different problems. The error codes will be included in the dump files. Without those codes it will be a guessing game trying to figure out what is affecting your computer.

In the meantime you can try some general troubleshooting steps. Check for damaged or corrupt system files by running a system file checker scan from an elevated command prompt (option two.) If problems are found, run the scan 3 times and reboot your computer after each scan.

SFC /SCANNOW Command - System File Checker

Check your hard drive for problems by running Check Disk.

Disk Check

And you could also go through these troubleshooting guides:

Troubleshooting Windows 7 Failure to Boot

Troubleshooting Steps for Windows 7

EDIT: Once again koolkat was faster on the keyboard!

Read other 1 answers
RELEVANCY SCORE 76.8

Howdy all! I was here in the past a while ago with getting semi-frequent BSODs on boot after the splash and login screen. The issue I found was a loose power connector. I snugged it in place, and then my system is fine for many months (maybe four or five). Now this morning, I had quite a few BSODs after the splash screen and logging onto my computer. I was finally able to get a successful boot after many attempts. I checked power connections, tried to make the connections secure, yet still got BSODs. Dump is attached. You guys are awesome. Thanks!
***STOP: 0x000000F4

A:Months of system being fine, sudden multiple BSODs this morning

EDIT: Here is the stop code:

***STOP: 0x000000F4

Read other 9 answers
RELEVANCY SCORE 65.2

Hi there,

I am currently trying to troubleshoot my computer as it has recently stopped booting up. I have had a previous thread about this issue here. However, I am moving my thread to the BSOD section after suggestion by 'essenbe'

Here is a summary of my issue:
For months now, I have been having intermittent issues with BSODs, 'hardware errors' (in the reliability monitor) and freezes on multiple installs of Windows.A few weeks ago, I installed a new graphics card (Asus GT610 2GB) which replaced integrated graphics. Also, at the same time as installing the graphics card I 'refreshed' Windows 10 and installed all of the latest drivers.All was running fine for a few days, until the computer simply refused to boot one day. When ever I try to boot now, the Windows startup screen simply hangs and never does anything. Safe mode simply boots to a black screen.I have tried to run linux live cds and Windows disks. All of which often fail to boot (they just hang on the startup screen).

So far, I have tested my ram with memtest86+ (8 passes) and hard drive with seatools (long test passed).

I attach the last version I could get of the BSOD logs (the folder is slightly outdated as obviously I cannot get any logs now!)

Thank you in advance for your help!

A:Computer Not Booting, Multiple BSODs and Hardware Errors

The dump file is

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck A0, {c, ffffffffc0000001, ffffe000f54c9010, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::OKHAJAOM::`string'+25ba )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
INTERNAL_POWER_ERROR (a0)
The power policy manager experienced a fatal error.
Arguments:
Arg1: 000000000000000c, Dump stack failed to initialize.
Arg2: ffffffffc0000001, Status code
Arg3: ffffe000f54c9010, Address of the dump stack context
Arg4: 0000000000000000
Debugging Details:
------------------

BUGCHECK_STR: 0xA0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: f
ANALYSIS_... Read more

Read other 0 answers
RELEVANCY SCORE 58

So here's the deal. In April 2011, I decided to treat myself and upgrade my existing gaming computer. Pretty much just a nice overhaul while still staying affordable.

It turned into a nightmare.

For the last nine months I've been battling chronic errors. The errors are as follows:

Most notably, over time Windows will reach a point where if it's turned off for a long period of time, say overnight, when I try and start it in the morning it will blue screen. This problem becomes worse as weeks go on. Actually, recently, even the speed at which it gets worse quickens. I kept the same OS install from like May through August before it got to the point where it almost just wouldn't start up. Conversely, I reinstalled my OS just a week or two ago and it's already at the point. Reinstalling the OS seems to reset it. At it's worst (or the worst I'll let it get), the PC will go through 5-10 Blue Screens when starting up before working. Each time the PC gets further and further along when it blue screens.
Occasionally, after a string of blue screens, Windows will start up not recognizing my graphics driver (this is a recent development). If I then restart the PC yet again, it usually comes up fine with the graphics driver recognized.
Sometimes Windows will just freeze. Usually if I'm doing a lot of stuff at once (yesterday I was downloading, had three or four file windows open and was moving files around). When this happens there's no BSOD, nothing. The comp just freezes. I can't move... Read more

A:Multiple BSODs when "Cold" Booting

NOTE: Please provide the following information for a more detailed response: http://www.techsupportforum.com/foru...ta-452654.html

While waiting for a reply:

I suggest starting all troubleshooting with the following diagnostic tests (located at this link: Hardware Diagnostics ). They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
Hard Drive Diagnostics (read the details at the link) - Test ALL of the hard drives.

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks




Please rerun the diagnostics so we can get a fresh baseline.

Read other 12 answers
RELEVANCY SCORE 58

It's been almost 3 years since I needed Bleeping Computers to diagnose my problem, I'm back now with Windows 8 problems... Yay.
 
Anyways when booting the laptop this morning I was greeted with a BSOD with error "SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (Wdf01000.sys)". Last night I put the computer into hibernation with my browser open, so it should have been waking from that.
 
Specs:
Intel i7 3740QM
16GB Kingston RAM
Nvidia GeForce GTX 675MX
Seagate Momentus XT 750GB
The laptop is based upon a Clevo P150EM
 
I'll attach a zip with a minidump.
 

A:BSOD upon booting this morning

Hi
 
Did you use or used any joystick with your laptop ?.

Read other 4 answers
RELEVANCY SCORE 57.2

Hello! I have an HP Pavilion dv6000 laptop running Vista Ultimate 64 bit. The computer has been restarting during the night in spite of my changing the Windows Update settings to download updates but not install so that there'd be no need to restart during the night. However, this is still occasionally happening.

Around 1 a.m. this morning, I saw that my laptop was restarting, with the black screen with the green light running across. I left it alone until 8 a.m. There was a log-in screen up, so I put in the password, and the "welcome" screen came up. It stayed on the welcome screen for much too long, so I used my husband's computer to look up what to do. After reading about the problem, I tried pressing ctrl/alt/delete several times, but nothing changed. So I shut it down, then restarted it, and left it with the black screen/green light going and went to breakfast.

Returning from breakfast around 9:50, the same screen was still running. Ctrl/alt/delete did nothing. Am currently writing from husband's computer and waiting to start mine back up.

In reading on this forum, one thread mentioned that a flat battery can cause problems. My battery is completely flat and does not even register on the battery icon...there is just a red "X" there. I haven't replaced the battery because this laptop has had so many problems since October 2009. I had the hard drive replaced in November 2009, then re-installed Vista in early December 2009. I'... Read more

A:Laptop not booting correctly this morning

Read other 16 answers
RELEVANCY SCORE 56

My Toshiba Satellite C50-A-1DV laptop, running on Windows 8.1 keeps booting up from sleep mode between midnight and five AM. It starts, the disc in the disc drive spins, waking me up, and after it gets to the login screen it shuts down again. I've been told to check scheduled maintenance but it wasn't, and has never, been enabled. On the 6th of May it started up at around 1:35AM. On the 7th it started at around 4:35AM. On the 8th it started up at 4:20AM (It's 4:20 man!). I've had it for a year and two months and this only started on the 6th. It's probably something simple but I can't keep getting woken up by this machine. Any help would be appreciated. Thanks.

A:Laptop Booting Up from Sleep at Random Times in Morning

Run command prompt as administrator, then type the following and press enter:
 
powercfg -lastwake
 
This should provide some information about what caused the last wake event (usb device, wake timer, etc.).
 
Next check for wake timers. Type the following and press enter:
 
powercfg -waketimers
 
Reply with the results of these commands.

Read other 29 answers
RELEVANCY SCORE 53.6

Thanks in advance for any advice.
The BDODs appear to be of multiple types.
Motherboard, RAM, wireless card and SSD were all replaced in early October and system completely reinstalled but BSODs continue. They are more likely to occur 1-2 min after waking from sleep, but recently also occurred when the system is just sitting.

System details below
Windows 7 professional SP1, x64
Version of OS: Windows(7), VOLUME_KMSCLIENT channel
See my profile for system details.

This is a laptop, Lenovo T440s

Darren

Read other answers
RELEVANCY SCORE 52.8

Hey. I don't have much more to go on with this. I've been coming back to my laptop recently after being away for five minutes to find its had a BSOD and restarted. I suspect that its failing to hibernate properly, when it goes into standby. Tried to install the debugging tools to have a look myself, but I gave up on that =/ Couldn't get it to install. Hope you can help.

Oh, it may be relevant that I saw some sort of memory leak issues in the event log recently. I haven't looked into that yet, but I did notice the section here on those, and might have a look into it myself.

A:BSODs while AFK (perhaps related to suspend/resume/hibernation?)

Code:
BugCheck 9F, {3, fffffa80077a5b30, fffff80000ba2748, fffffa8004d18c10}

Probably caused by : usbaapl64.sys

Code:
0: kd> lmvm usbaapl64
start end module name
fffff880`0bb65000 fffff880`0bb77000 usbaapl64 T (no symbols)
Loaded symbol image file: usbaapl64.sys
Image path: \SystemRoot\System32\Drivers\usbaapl64.sys
Image name: usbaapl64.sys
Timestamp: Tue Nov 27 23:38:02 2012 (50B54EDA)
CheckSum: 0001669F
ImageSize: 00012000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your Apple iPod/iPhone Mobile USB device driver seems to be causing problems, please check for any updated drivers from the Apple Support Page if possible, I'm not sure if you'll find any updates - Apple - Support

Or, don't use the device when placing the laptop into Sleep/Hibernate mode.

The bugcheck indicates that a IRP has been pending for more than 10 minutes. Every 100 seconds a timer is expired, and a DPC routine called nt!PopCheckIrpWatchdog is used to scan for any pending IRP stored with the nt!PopIrpList, for each scan a counter is incremented. Once the counter threshold (around 41) has been exceeded, then nt!PopCheckIrpWatchdog is called to produce the bugcheck.


Code:
0: kd> !irp fffffa8004d18c10
Irp is active with 7 stacks 4 is current (= 0xfffffa8004d18db8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Contex... Read more

Read other 3 answers
RELEVANCY SCORE 52.4

When I hibernate the PC closes down but when I press the start button the PC starts but will not boot. Also if I use the restart button the PC closes down but will not reboot. In both cases if I close the PC manually and then restart it does not boot. If I then wait a good ten minutes and I press the start button it boots as normal

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: AMD Sempron(tm) Processor 2800+, x86 Family 15 Model 44 Stepping 2
Processor Count: 1
RAM: 1023 Mb
Graphics Card: NVIDIA GeForce FX 5200 , 128 Mb
Hard Drives: C: Total - 76308 MB, Free - 50775 MB;
Motherboard: , MCT2/M1689, ,
Antivirus: Microsoft Security Essentials, Updated: Yes, On-Demand Scanner: Enabled
 

A:Win XP(3) not booting from hibernation or restart

Read other 7 answers
RELEVANCY SCORE 52.4

Basics: My system in a dual boot configuration with 2 hard drives, each running Windows XP SP2.

Long story short, I have a commercial program that cannot be saved and restarted without causing major problems (due to a bug that the manufacturer has no intention of fixing). So my idea was to run this application in one O/S, and to use hibernation instead of the usual save/restart process. For example, I'd start up my system, choose O/S #2 and work with the Buggy App. When finished for the day, I'd hibernate the system. For all other uses, I'd select O/S #1.

Here's the problem. During a typical dual-boot start-up, Windows provides you with a menu that allows for the selection of the desired O/S. However, after hibernating and restarting, the boot sequence DOES NOT GIVE YOU THIS OPTION! You can force things using the F8 key, but that simply generates a screen with two choices - continue with restart from hibernation, or delete the hibernation data and go to the O/S selection menu!

So - is there a way around this? In other words, can the O/S be selected before Windows makes the decision that this is a hibernation recovery and forces you down that single O/S road?

Again, any and all advice and comment is greatly appreciated!
 

A:Dual Booting and Hibernation

Read other 7 answers
RELEVANCY SCORE 52.4

Hi all.

Recently Vista (Business, SP1) has been unable to hibernate. I either press the start-menu button, or the "Sleep" button on the keyboard (configured to hibernate via the control panel) and the screen goes black as usual, then after about 10 seconds, the screen comes back on with a "Locked" login window, just as if I'd hibernated and then immediately reawoken the computer.

This problem appears to have been caused by recently choosing to change from using the windows bootmanager to GRUB. Here is the current situation:

HDD 1 - Has Vista boot manager, and Vista. OS on C:, Data on D:.
HDD 2 - Has GRUB and Ubuntu.

If I boot from 1, I can still hibernate. I have just tried this, by changing the boot order back to how it was. If I boot from 2 (i.e. chainloading the Vista boot manager from GRUB) then everything works fine except hibernation.

Searching around suggests that other people have had luck with marking the Vista partition as Active. However, this is not possible in my case since C: is a logical partition and, according to Vista, it is not possible for a logical partition to have an active flag. Why this is the case I have no idea and, indeed, why hibernation should care about whether the partition is Active is also beyond me.
The fact remains, though, that even with an inactive partition, I can hibernate as long as I boot from HDD 1.

In addition, C: has the "Boot" flag (I always thought that the "Active" flag... Read more

A:Hibernation not working when booting from second HDD

OK, update. I learned that it IS possible to mark a logical partition as Active, and did so with gparted in Linux. This did not fix the problem.
I also tried using the MBR (rather than the PBR) of the windows disk to boot, in the grub config. This also did not help, but something mentioned on the Multibooters website about Drive Swap indicates that perhaps this is still not necessarily the same as booting straight from the Windows drive.

It seems odd that the partitioner has set the drive up in the way it has (i.e. one primary and one logical partition, with the extended partition being first in the partition table, and the logical partition (of course last) being the OS partition) and it has resulted, I've found, with the bootloader being on the Data partition (D:), not the OS partition (C:). The hiberfil.sys is, however, on C: and is not movable from there.

I will look into this drive swap feature, but I don't hold much hope, Any known fixes would be great still.

Read other 1 answers
RELEVANCY SCORE 51.6

Hello. I have an issue with my touch pad. If I put my laptop into Hibernation and reboot my touch pad doesn't work. The only way it would work is if I booted up normally or reset it. I have tried updating the drivers but it keeps on happening. My Laptop is always up-to-date. I have tried a clean install of my touch pad drivers but it doesn't fix the problem. What can I do to resolve this problem?

Windows 7 Home Premium 64 Bit
Samsung Series 3
6GB DDR3 RAM
AMD A6-APU 1.5GHz

A:Touch Pad Freezes After Booting From Hibernation

See the last post on this thread

keyboard and touchpad do not function after PC wakes up from - Microsoft Community

I also see others having this issue. One says you can close the lid for a minute, then it will work again when you open it (better then restarting). Many suggest uninstalling the touchpad driver, and installing the latest. If you can't find the driver (assuming it is not the one from that thread), let us know the full model # of your laptop and we'll see if we can find it. A Guy

Read other 2 answers
RELEVANCY SCORE 51.6

My laptop wont start after hibernation. The hard drive starts to spin up after I hit the power button but stops and the screen stays black. The power is still going (I checked the lights) but it still doesn't start. Once I completely turn it off by holding the power button, it starts fine. It wouldn't be a huge deal except I lose everything that I had running. If anyone has any ideas on whats happening or how to fix it, please help.

A:Inspiron N4110 not booting after Hibernation

Hiyya leadwolf and welcome well one suggestion that comes to mind is disable hibernation. Personally I disable it to keep my machines up to speed. I also don't like leaving things running anyway and getting going from hibernation in my experience take almost as much time as a boot.

If you are interested you can find how in this tutorial which by the way that has other settings and tweaks that will help your machine run faster anyway.

Optimize Windows 7[2]=Performance

Read other 1 answers
RELEVANCY SCORE 51.6

I have a MSI GE620 laptop with Win7 Enterprise x64 English and every time it boots or wakes from hibernate the wi-fi adapter is disabled, I have to press a fn+F8 key, which enables/disables wi-fi. I went to my wi-fi adapter properties and unchecked "Allow turning off this device to save power", but it's still the same. Strangely, it never happens during sleep (standby mode), just during boot or hibernation. Wi-fi adapter is Atheros AR9285, and I have no other network devices enabled. It didn't happen before either.

A:Wi-Fi is always disabled on the laptop after booting/hibernation

Libastral run these mate for starters


http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < DO NOT run on a SSD

Read other 1 answers
RELEVANCY SCORE 51.6

So I turned on my computer this morning to check my email and then it pretty much 'broke down' on me. First of all my keyboard seemed to have malfunctioned as the lights were working but the keys wasn't. What's strange is that when i pressed Ctrl+Alt+Del or Ctrl-Shift-Esc , the computer went into hibernation I think. Then i had to switch it off by holding the power button. When it turned back on this happened:

I'm pretty sure that the BIOS settings has been erased as the splash screen came up (This happened before , since I accidently touched the button on the motherboard but it's inside the case now) Then I was brought to this screen:

Your computer can't come out of hibernation.

Status: 0xc0000411

Info: A fatal error occurred (forgot what it says here) restoration data

File: \hiberfil.sys

Any information that was not saved before the computer went into hibernation will be lost.

So i turned it off again and on , then i received the follow errors:

Adapter 1
No hard disk detected!

CPU Fan Error 1
Press F1 to resume

My CPU doesn't have a fan on the heat sink but it's managed all this time.

My keyboard pretty much died then ; the keys were not working but the lights were. This keyboard has had lots of problems in the past. The R,C and E keys do not work unless you press hard on them and the light from the numlock key pretty much flickers all the time.

Anyway , i tried this several times , restarting and starting again but I couldn't get past these screens so I chang... Read more

A:Problem with computer booting , can't come out of hibernation.

  
Quote: Originally Posted by Nubcake95


My CPU doesn't have a fan on the heat sink but it's managed all this time.


Are you water cooling? If not, your CPU might be damaged. That may be your problem, especially if you've been overclocking.

Read other 5 answers
RELEVANCY SCORE 51.6

I've been having BSOD trouble over the past four or five months now. The BSODs typically happen once a week, sometimes twice, with small strings of daily crashes here and there. I'm at my wit's end when it comes to trying to figure out where the problem lies. All of my parts are under warranty, so I'm desperate to find out which one, if any, are at fault.

I've tested my hardware extensively. Memtest86 for 7 passes on multiple occasions, using different stick and slot combinations. Ran torture tests using Prime95 for the processor. All hard drive checks come back without problems. Ran Furmark on my video card with no artifacts.

The BSODs happen most commonly when using video playlists for both Windows Media Player and Media Player Classic, multiple types of files. They also sometimes occur when playing particular games (Borderlands II, Dark Souls). Installing a fresh copy of Windows 7 did not remove BSODs, even after running it in factory settings with no additional installations.

I have attached a dump file, and I thank whoever attempts to assist me.

A:Multiple BSODs, Multiple Bugchecks (0xD1, 0x3B, 0x50, 0x0A)

Hi anthonylert.

The versatility of the bugchecks are the indication of failing memory prima facie, but as you said you ran Memtest86, can you run the memtest86+?

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Also, disable bluetooth,at least as a test. The Atheros bluetooth module is appearing to be failing.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Let us know the results.

Read other 1 answers
RELEVANCY SCORE 51.6

Hey there,

So just to start things off, I'm 18 and don't really have much technical knowledge when it comes to computer hardware and errors, etc.

I started getting BSODs a while back, but they weren't very frequent, so I uninstalled all the programmes I had on my laptop and it stopped for the most part, so I assumed that was the problem.
As time went on up until now, they have been getting much more frequent, with the error message at the top stating something different each time, getting what seemed more serious. Sometimes when I get 1 BSOD, it would BSOD again on Startup, then again after that, which is rather frustrating haha.
I was reluctant to posting on forums, but it's come to the point of either fixing it logically, or ending up punching the screen xD

I can't really define when it happens, as it's more often some times than others, I have a hinch it has something to do with my graphics card though, as I would be playing a game, then I'd open up a new tab and watch a video then get BSOD at some point.
However it happens (less frequently for the most part) when idle or with minimum programmes running.

The programmes I mainly use on the laptop is:

Google Chrome
Skype
Sony Vegas Pro 11 (Video Editing Software)
Total Media Extreme (Personal Video Recording Software)

I can't remember any of the actual error codes, but some of the display messages i can remember are:

PAGE_FAULT_IN_NON_PAGE_AREA
Attempt to Execute to Non-Executable Memory
(som... Read more

A:Multiple BSODs, Random Occurences, Multiple Error Codes

Hello and welcome to Sevenforums.

Things we need
A nfo file




Quote:
To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.



BSOD Analyse

Update these(this) driver

Code:
Afc.sys Wed Jul 12 07:48:20 2006 (44B48D24)
amdxata.sys Fri Mar 19 17:18:18 2010 (4BA3A3CA)
archlp.sys Fri Feb 6 13:39:29 2009 (498C2F81)
bcmwl664.sys Wed Jul 8 02:45:04 2009 (4A53EC10)
GEARAspiWDM.sys Mon May 18 14:17:04 2009 (4A1151C0)
hcwhdpvr.sys Wed Mar 7 16:03:30 2012 (4F5778C2)
igdkmd64.sys Fri Jun 3 22:34:06 2011 (4DE9453E)
intelppm.sys Tue Jul 14 01:19:25 2009 (4A5BC0FD)
MpFilter.sys Fri Mar 9 12:05:26 2012 (4F59E3F6)
yk62x64.sys Mon Sep 28 10:19:31 2009 (4AC07193)
http://www.carrona.org/drivers/driver.php?id=Afc.sys
http://www.carrona.org/drivers/driver.php?id=amdxata.sys
http://www.carrona.org/drivers/driver.php?id=archlp.sys
http://www.carrona.org/drivers/driver.php?id=bcmwl664.sys
http://www.carrona.org/drivers/driver.php?id=GEARAspiWDM.sys
http://www.carrona.org/drivers/driver.php?id=hcwhdpvr.sys
ht... Read more

Read other 8 answers
RELEVANCY SCORE 51.6

Last couple weeks i've been having a large amount of bluescreens, including but not limited to bccodes 116, d1, 4e, 1a, 50 and 7a. Last night it also froze two or 3 times with no bluescreen. I recently upgraded my Phenom 9550, Biostar A770E and 6GB of DDR2-800 with an i5-2500k, an MSi P67S-C43 and 4GB of DDR3-1333. The problems didn't start with the hardware upgrade, just escalated.

Yesterday I formatted my HDD and did a clean install of windows in hopes that my problems were just driver conflicts, so as of now i only have 3 crash dumps, 4e, d1 and 1a. 4e and 1a in BlueScreenView only show ntoskrnl as the culprit and no other drivers. d1 points at both ntfs.sys and ntoskrnl. A couple of the old crash dumps pre-format were citing nVidia and DirectX drivers.

I've put my RAM through 16hrs+ of memtest86+ testing, and used the windows memory diagnostic and the memory test in my BIOS. I also checked my PSU voltages with a multimeter, all of them check out. My graphics card is moody and sometimes artifacts heavily in games, sometimes works fine. Temperatures are not an issue, My GPU gets to about 72C in games and 86C in furmark torture testing without crashing. my CPU sits around 38C idle, 50-60 load, 70-80 in p95 without crashing.

specs:
Intel Core i5-2500k (stock cooler and clock)
2x2GB G.Skill Ripjaws DDR3-1333
MSi P67S-C43 mobo
ZOTAC nVidia GTS250 (512MB)
Plextor PX-880SA dvdrw drive
WD Caviar Blue 250GB HDD
Antec EA-650 PSU
Windows 7 Ultimate x64

A:Multiple BSODs, multiple BCCodes, does not happen in safe mode.

(The problems didn't start with the hardware upgrade, just escalated.)

so you changed out your motherboard/cpu/memory and did a clean reinstall of windows. so the only things left are video card/harddrive or power. have you updated your video card drivers? also try running chkdsk on the harddrive.


scrooge

btw i love that screen name

Read other 5 answers
RELEVANCY SCORE 50.8

Hey really lost on this one as I have not really dealt with BSODS before. I build my computer a couple months ago. Recently while gaming I have had roughly 5 BSODS. They are all for different things it seems like and I have no clue how to fix it. It wont do it while sitting on the computer on firefox or just the desktop but usually an hour into gaming I will start to get them. Any help would be greatly appreciated as my computer did not do this when I first built it! Thank you! I attached my file from your guys tool that you requested. Also I dont know if it makes a difference or not but when the computer crashes, all of my desktop shortcuts will be in random places not where I originally placed them.

A:Multiple differernt BSODS while gaming on multiple games

Please uninstall Avast and use Windows Defender as alternative
Avast - Uninstall Completely - Windows 7 Help Forums

Code:
ffffd000`22e0f678 fffff800`1a24289bUnable to load image \SystemRoot\system32\drivers\aswSP.sys, Win32 error 0n2*** WARNING: Unable to verify timestamp for aswSP.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSP.sys
aswSP+0x2289b
ffffd000`248476b0 fffff800`cf57f9a8Unable to load image \SystemRoot\system32\drivers\aswMonFlt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswMonFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for aswMonFlt.sys
aswMonFlt+0x1f9a8
I recommend to reinstall/update every driver from Gigabyte and remove the Gigabyte software.
The Gigabyte software is known for causing bluescreens.
For reinstalling the GPU drivers, please follow instructions below
Please uninstall everything of Nvidia using Display Driver Uninstaller and install new drivers from Gigabyte. Be sure the clean install box is checked and only install the Graphics driver and the PhysX driver.

Read other 0 answers
RELEVANCY SCORE 50

Hi. Last year, I bought a new PC for graphical software and gaming. From the beggining it had problems (I was recieving BSODs), so, I tested RAMs. It resulted that RAMs we're bad. I returned them in warrantly. (The PC was assembled by the shop, components we're choosen by me so that aren't any compatibility problems). Ok, so, I recieved new RAMs. But, even now, problems still exist. Now, even more, I recieve artifacts when I open a intensive graphical app (in some cases,even Youtube causes them). The more I stay on that app, more artifacts appear, until I recieve a AMD Display driver crash and, after that, a BSOD (sometimes,it directly gives BSOD, without driver crash). I tried to interchange RAM positions in all possible ways, but it didn't worked.
The GPU can't be placed on the 2nd PCI-E slot, because it is too long, and reaches the HDDs cage. I even tried a BIOS update (it worked, but it didn't helped me). I know that I removed the BIOS battery, I left it about 1 minute out, and put it back. That night, PC worked well. Next morning... The problem appeared again. I also tested CPU and HDDs, and they're all good. Can you guys help me? I remained out of ideas. Thanks!
P.S:
As the BSODs appears, I will upload screenshots too. I don't have now any screenshots with BSODs. Instead, I used the program from the BSOD help, and I made a log, attached to this post.

Read other answers
RELEVANCY SCORE 49.6

Hello:

My wife is a college professor and uses her Dell Latitude 110L a LOT for online classes, grading, and internet research (She NEEDS this machine.) This machine was purchased from an associate at work who was an IT guy whom we have lost track of, and it has been very good for the few years my wife has had it. Last week she began getting pop-ups of virus security alerts. I did some investigating on line and downloaded/ran Malwarebytes. This seemed to get rid of the pop-ups, but shortly thereafter google searches began to be redirected. Since then the computer seems to progressively run slower, the search redirections are more frequent, keystrokes do not register at all unless typing VERY slow, and once it sits long enough to go into sleep mode, it cannot be awakened without a hard shutdown/reboot. An odd, and perhaps unrelated occurrence is that upon initial boot up, the wallpaper she had selected appears, but is replaced by a gray background once the boot process is completed. I ran Malwarebytes and Symantec anti-virus scans this morning. The results of both indicate no issues.
She is running Windows XP with Service Pack 2, and somewhere in the process of all of this, IE 8 was installed. Despite knowing very little about this area, I am by default her IT department. Although I have little experience with this, I can follow instructions. Any help would be greatly appreciated. I downloaded HJT and ran it this morning. The log follows. Thanks in advance for your help.

Log... Read more

Read other answers
RELEVANCY SCORE 49.6

Hibernation is pretty straightforward - put the system into hibernate (or have the system do it for you), and the next time you start up, Windows restores the system exactly as it was when hibernation occurred.

Here's my dilemma - After that one-time hibernation reboot, how can you go back and boot up the same hibernation file? This would be enormously useful, but I can't figure out how to make Windows XP do this (I'm running SP2).

Any and all guidance would be deeply appreciated!
 

A:Multiple Boots from the same Hiberfil.sys file (Hibernation)

Read other 6 answers
RELEVANCY SCORE 48

Ever since that last cumulative update for win10 in the past 2 weeks ive experienced constant BSODS. Constant system hangups. Literally I was sitting here with nothing actively running except google chrome and trying to post this thread and my entire system locked up, screen and all. I wasn't able to do anything except hard restart. This happens 3-4 times every hour.

A:Multiple BSODS, Multiple reasons given

I just unplugged a headset from my tower and it caused the application that I had running to crash as a result of unplugging headphones from a tower.

Read other 1 answers
RELEVANCY SCORE 47.6

After multiple Hibernation events: windows login fails to recognize correct password


After repeatedly hibernating the computer for about a week or 2, it will eventually refuse to recognize legitimate password and fail to login, yielding "did you forget your password" message.

IF I shut down the computer (thus losing all open windows) and reboot, the password works fine. I have repeatedly changed passwords, but this does not help.

Windows XP Hibernate feature has never worked properly and that is why Windows defaults with this feature off and hidden from newbies. I love the concept but have always found it to be buggy on every machine it has been on. Periodic shutdown and restart is needed to flush memory, but this is the first time I have seen this particular issue.

It seems to occur when Hibernation fails to stay off and the computer immediately re-awakens when hibernate shutdown is complete. In other words, unit will not stay in Hibernation but cycles back on, unless power cord is pulled. When power is returned, computer may immediately boot up.

This problem began on a newly assembled computer with fresh XP SP2 install. (AMD dual core 6000; 2GB RAM; Asus M2N-E motherboard). All updates done, including XP's problem with dealing with 1GB of RAM and more.

Internet usage is safe and clean on main sites only. I Use AVAST antivirus, Spybot, Ad-Aware. I used a SmitfraudFix as I thought I had an infection.

I use both Firefox and Explo... Read more

A:After multiple Hibernation events: windows login fails to recognize correct password

Gee, I am disapointed that no one was able to suggest something here. I did my part by helping others, so what's the prob?

Because this involves immediate rebooting of the computer(hardware?) AND a software issue of not recognizing password, I am leaning to CPU issue. I have seen some weird issues in past that were CPU. I do not have a tester CPU; I do have anothe MB and may try that.

Hey wizzards, What do you think?

Read other 11 answers
RELEVANCY SCORE 46.4

Hello! I am using a Dell 1640 laptop with 4Gb of RAM, which is running on the Windows 7 Home Premium 32 bit version. A few hours ago, I tried to partition a memory stick, without a positive result, as I could not get the laptop to recognise the memory stick as a hard drive.
So I downloaded partition magic without looking at how much trouble the software caused to Windows 7 users, installed the program and ran it. A message came up saying the program is not compatible with my version of windows, or something like that, but I continued nevertheless. As soon as the program loaded, a message came up saying one of my registry files was corrupt, and the length of something was mentioned.
I did not check what this was, and stupidly, I just proceeded and, to my discontent; BAM. Blue Screen of Death.
It said something about a Kernel Error I think, but I thought it was only a one-time crash so I did not write it down.
When I tried to reboot my computer, and to start windows normally, the Windows 7 loading screen came up for around 5 - 10 seconds, and then froze for half a second, and I got the BSoD again, but this time, it only flashed, so I couldn't record the information.
I tried restarting my laptop again; this time I selected Launch Startup Repair (or something like that, it was either that or 'Start Windows Normally'). It went on for a few minutes, and did not do much - it only came up with 'Startup Repair cannot repair this computer automatically'.
Here are the problem deta... Read more

A:Windows7 not booting; BSoDs

I Managed to get the Technical Information of my Bluescreen!
'*** STOP: 0x0000007B (0xFFFFF880009A9928, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)

Read other 3 answers
RELEVANCY SCORE 46.4

Hello, I got some BSOD troubles I hope you fine folks can help me with. So let me describe what's been happening:

Whenever I cold boot up my computer first thing in the morning, chances are the computer will get a BSOD. After maybe 15 minutes of shenanigans, the computer works just fine for the rest of the day, until I shut it off for the night and the whole thing starts over again.

Now, this has happened before, when I had Vista on this computer. It got so bad, I went to a local computer shop that offered a reformat along with a free copy of Windows 7 Ultimate and Office 2007 for $75 (iknowright?). And for a month it was peaches and cream, but now the BSODs have been rearing its ugly head again.

Anyway, I tried to look at the minidumps with BlueScreenView and Windows Debugging Tool, but I just can't make heads or tails of it, so I come to you folks. I'll attach the zipped file SF Diagnostic Tool created. Thanks.

A:BSODs when booting up computer

had a look through your dump files and noticed a few things:

First it seems that zone alarm is causing your bsod:


Code:
fffff880`09217d88 fffff880`040f38a1Unable to load image vsdatant.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for vsdatant.sys
*** ERROR: Module load completed but symbols could not be loaded for vsdatant.sys
vsdatant+0x8d8a1
Driver Reference Table - vsdatant.sys

Please uninstall it and replace it with a combination of Microsoft security essentials and Malwarebytes Anti-malware

Tip: when installing Malwarebytes be sure to uncheck the box offering to start a free trial.

Update your bios it is very old:


Code:
BIOS Release Date 04/21/2008
updates can be found on the computer manufacturers webpage

Read other 9 answers
RELEVANCY SCORE 46.4

Ugh... To start at the beginning:
Few days ago during start up I experienced my first BSOD and it was INACCESSIBLE_BOOT_DEVICE. After few restarts system booted and I scheduled chkdsk /f /r (or the other way around, don't remember anymore), since that was what the internet told me to do. After another restart chkdsk picked up and promptly got stuck at 11%. Subsequent restarts
proved fruitless unless you count more BSODs, some times INACCESSIBLE_BOOT_DEVICE and sometimes IRQL_NOT_LESS_OR_EQUAL with no further description. Eventually booting would stop at manufacturer's (Lenovo) logo. So I took the blasted thing to a technician.
The guy told me almost at the door it's probably my HD dying. He later said he run test on all hardware components but they all seemed fine. So he hit recovery button (I forgot to mention that I tried that too with no effect) and it worked...
So he recovered original W8.1 and upgraded it to W10. And that's what I payed him for in the end :/
At home I decided to make a clean install of W10 since I feel no love towards all the crap Lenovo puts in their laptops. Went fine, system worked without a hiccup for about a day and... BSOD on a startup. And refused to boot completely.
That's when I decided to come for hep here, but had no diagnostics to show and no prospect of getting them without Windows actually starting. Then I thought problem may be strictly W10 related, so I hit recovery and got W8.1 recovered. Their were some more BSODs during the process but... Read more

A:Various BSoDs, no booting most of the time

I personally have not faith in Lenovo diagnostics. I have a Y700 that shows a bad Intel video card.Yet the system works just fine even with the latest games.Posts on the web suggest that this is a problem with the Lenovo diagnostics - but they haven't been fixed yet. Run Seatools for Windows while you're able to get into Windows.http://www.seagate.com/support/downloads/item/seatools-win-master/ Your UEFI/BIOS (version 79CN49WW(V3.08)) dates from 2014.  Please check at the manufacturer's website to see if there are any UEFI/BIOS updates available for your system.  If you are able to install the update through Windows (without booting from an external drive), then go ahead and update it.  WARNING - if the computer might shut down during this procedure, please don't do it, as this may physically damage the computer and prevent it from booting.FYI - W8 and W10 communicate more with the UEFI/BIOS than previous versions of Windows, so it's important to ensure that the UEFI/BIOS is kept up to date (and that outdated UEFI/BIOS' may be the cause of some compatibility issues).Only 31 Windows Update hotfixes installed.  Most systems have 180 or more.  Please visit Windows Update and get ALL available updates (it may take several trips to get them all).Don't worry about the specific number, it's just important that you have checked and installed any updates that were available (and didn't experience any errors).Not much else noticeably wrong with t... Read more

Read other 8 answers
RELEVANCY SCORE 46

Hello there guys, from the thread title you can already guess my issue is not simple. My computer is about four years old, and I use it intensively, so obviously sooner or later this would lead to issues.

For the past two weeks, I have been getting BSODs randomly, at first the cause was ndis.sys, which was caused by DAEMON TOOLS LITE. I uninstalled that and that specific BSOD was gone, but later, at random moments during gameplay I was getting strange "static-like" screens followed by BSODs, apparently caused by graphics driver. I have uninstalled the graphics driver and reinstalled it multiple times, apparently the BSODs stopped, but they came back and occasionally happen.

Yesterday it happened again, but then worse stuff started to happen. BlueScreenView points ntoskrnl.exe (BAD_POOL_HEADER) as cause for the most recent Blue Screens, and Windows started having boot difficulties, entering reboot loops (disabling auto-reboot results in an error). I have tried multiple things while in Safe Mode, HOWEVER sometimes I got a different BSOD even while in safe mode (the error was SYSTEM_SERVICE_EXCEPTION, as you can see in the minidump file). The recovery console doesn't work, triggering some kind of hard drive error. Today it has been VERY difficult to start Windows after a BSOD, I wasn't even being given the option to boot into safe mode, did various full shutdowns plugging the power cable off, and after multiple tries Windows just started normally.

I have a lot of s... Read more

A:Various random BSODs w/ different causes, booting difficulties, etc

Hi.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If it does not show any error, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any.

Edit: Plan to update the BIOS to Version ... Read more

Read other 3 answers
RELEVANCY SCORE 46

Greetings,

A few months back I had these blue screens but I was able to do some hard drive cleaning up (uninstalled unused programs, cleaned registry with CCleaner, cleared up some space) and the problem stopped. Over the last week it's returned but not as often. When it started happening again it would happen shortly after Windows had fully loaded, and this would happen several times until I could successfully use my comp without a problem. Since then I've had it happen a few times but only once each before returning to "normal".

I have:
- Vista Home Basic 32 bit
- original OEM (is an Acer Aspire refurb), haven't reinstalled since buying
- comp is about 5 years old from purchase

I've run Malwarebytes quick scan without anything detected. My antivirus/firewall is VIPRE Internet Security 2012. I also recently defragged.

As can be seen in the performance report, Windows is not recognizing VIPRE for anti-malware or virus protection and I suspect this may be the problem, but at the same time doubtful of this because I'm not getting any system tray icons indicating lack of protection.

If any other info is required please let me know. Any help offered would be greatly appreciated! Thanks!

- Brendan

A:Vista - random BSODs after booting up

Oops, I forgot the attachment so here it is!

Read other 3 answers
RELEVANCY SCORE 46

My new desktop:
OS: Windows 10 x64 Full retail
Original OS: Windows 10 x64 Full retail
Approx. age of system: All hardware ~5 months
Approx. age of OS installation: ~5 months
Have you re-installed the OS? Yes

CPU: i5-6600k @ 4.6Ghz / 1.3vcore (Corsair h60 cooled; ~60C peaks)
Video Card: EVGA GTX 1070 FTW2 (Stock liquid cooled; ~50C peaks)
MotherBoard: Asus Z170-E
Power Supply: EVGA SuperNOVA 650 G1 650W 80+ Gold

My computer was running fine from the date I put it together to about a month ago, when I packed it up to move (in the front seat of my car so it wouldn't be damaged). I didn't unpack it until about a week ago. I had lots of updates to do, including drivers and windows updates. Now, when I play games, I get BSOD's randomly (irql_not_less_or_equal) from ntoskrnl.exe.

I have tried: re-installed windows, attempted to roll back the GPU driver, ran windows memory diagnostic and memtest86, cleaned my registry, ran my driver update tool to update the more trivial drivers (after the BSODs started), ran prime95 to stress my CPU, set my CPU clock to factory default, and updated my bios, which ALL failed to mitigate the crashes. NB: The stress tests failed to re-produce crashes.

I remote connected with a microsoft support employee who attempted to run the verifier.exe, but just ended up rendering my computer unbootable so I had to enter safe mode and delete those settings, and a follow-up on those logs/results was never done.

Attached are the required dia... Read more

Read other answers
RELEVANCY SCORE 46

My new desktop:
OS: Windows 10 x64 Full retail
Original OS: Windows 10 x64 Full retail
Approx. age of system: All hardware ~5 months
Approx. age of OS installation: ~5 months
Have you re-installed the OS? Yes

CPU: i5-6600k @ 4.6Ghz / 1.3vcore (Corsair h60 cooled; ~60C peaks)
Video Card: EVGA GTX 1070 FTW2 (Stock liquid cooled; ~50C peaks)
MotherBoard: Asus Z170-E
Power Supply: EVGA SuperNOVA 650 G1 650W 80+ Gold

My computer was running fine from the date I put it together to about a month ago, when I packed it up to move (in the front seat of my car so it wouldn't be damaged). I didn't unpack it until about a week ago. I had lots of updates to do, including drivers and windows updates. Now, when I play games, I get BSOD's randomly (irql_not_less_or_equal) from ntoskrnl.exe.

I have tried: re-installed windows, attempted to roll back the GPU driver, ran windows memory diagnostic and memtest86, cleaned my registry, ran my driver update tool to update the more trivial drivers (after the BSODs started), ran prime95 to stress my CPU, set my CPU clock to factory default, and updated my bios, which ALL failed to mitigate the crashes. NB: The stress tests failed to re-produce crashes.

I remote connected with a microsoft support employee who attempted to run the verifier.exe, but just ended up rendering my computer unbootable so I had to enter safe mode and delete those settings, and a follow-up on those logs/results was never done.

Attached are the required dia... Read more

A:BSODs while gaming after not booting my new PC for a month

Print out and follow the instructions here to run verifer> Driver Verifier - Windows 10, 8.1, 8, 7 & Vista (BSOD-related)

To start only select non microsoft drivers from starting with the letters from A to M, if you do get a bsod select N to Z when you do get a bsod from verifier look for a driver name on screen in case it does not save the bsod .dmp file.

Your upload only contains 1 .dmp file that is inconclusive naming ntkrnlmp.exe which is a standard Windows file that runs on every Windows PC so it is not going to be the cause only the process that discovered an error and called for a halt.


Code:
Debug session time: Thu Jul 13 02:39:22.001 2017 (UTC - 4:00)
Loading Dump File [C:\BSOD APP\SysnativeBSODApps\071217-5875-01.dmp]
Built by: 15063.0.amd64fre.rs2_release.170317-1834
System Uptime: 0 days 0:26:53.680
Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+23d )
BugCheck A, {b0, ff, 9a, fffff803de6a8d27}
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Bugcheck code 0000000A
Arguments:
Arg1: 00000000000000b0, memory referenced
Arg2: 00000000000000ff, IRQL
Arg3: 000000000000009a, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff803de6a8d27, address which referenced memory
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: AV_CODE_AV_nt!KiPageFault
MaxSpeed: 3500
Cur... Read more

Read other 3 answers
RELEVANCY SCORE 46

Hi there, I've been having this problem for a while now and thought I'd post here to see if I could get some help with a resolution. Whenever I start-up my PC when it has been shut down for a while (a few hours at least) I always get several BSODs in a row. Eventually it boots up no problem and works fine as long as the PC is left on, or just put to sleep. Powering down always results in the the series of BSODs again.

Now, I can use my computer for whatever I want for as long as I want with no problems as long as I don't shut it down. However, I'm not satisfied with that! This shouldn't be happening!

I couple of the error messages I get are:

driver irql not_less or equal...
page_fault in non paged area ntfs.....

I've uploaded my SF Diagnostics tools file as per the instructions i found on these forums.

I hope I didn't leave anything out!

A:BSODs after booting up from a powered down state

This looks like a memory error. Can you run memtest from hcidesign AND memtest86+. Or at least the memory tester in windows? Also run driver verifier.

Read other 2 answers
RELEVANCY SCORE 45.6

My problem is as follows:

System configuration: SSD(Win 10 64bit 1511) + HDD (Storage, No OS), uefi enabled

Today I have resumed my computer from hibernation and the first thing that came out was Avast notification to restart computer to finish installing an update. I have restarted but not through the option Avast gave me but restart when right clicking the start menu button because I needed to save my opened tabs in firefox. I am getting now constant BSODs with Critical_Service_Failed at windows blue logo and spinning dots animation when booting. Safe mode inaccesible, BSODs with 0xc0000021.

Windows has already restored some restore point at the automatic diagnose process, after that I have manually restored another few days old one from updating directX-no effect, did not say that it failed.

I booted Xubuntu Live from pendrive, booted fine and when I tried to open partition on SSD with windows it said that it's in an unsafe state/hibernated. I opened it read only, copied Minidump folder with 1 small 300KB dump file(is it strange, that it contained only 1 when I restarted and BSOD collected dump a few times?) and large 790MB MEMORY.dmp stored separately on the partition. BlueScreenView both red highlights ntoskrnl.exe.

Wikisend: free file sharing service smaller one, tell me if you need the big one

So, does the restart option when right clicking start menu in win 10 reboots clean or with some kind of fast boot hibernation automagic? Is there a key to press at b... Read more

A:Computer BSODs all the time at booting. Critical_Service_Failed

Please read BSOD Posting Instructions & How to upload files






So, does the restart option when right clicking start menu in win 10 reboots clean or with some kind of fast boot hibernation automagic? Is there a key to press at booting or command for command line to enter when in advanced recovery options to skip restoring from hibernation



Restart does not include the hibernation part.
You can't 'skip' hibernation part, you can disable it
Fast Startup - Turn On or Off in Windows 10 - Windows 10 Forums

Read other 4 answers
RELEVANCY SCORE 45.6

My computer began having problems recently after running perfectly for over a year. It began giving me BSODs with different messages (FLTMGR_FILE_SYSTEM, MEMORY_MANAGEMENT, IRQL_NOT_LESS_OR_EQUAL, An attempt was made to execute to non executable memory, and 3-4 others I didn't get a chance to write down). Then it shuts down, but when it comes back on the BSOD happens again within a minute or 2. At first The tower will sometimes beep at me after one of these shutdowns (multiple long beeps of even length). However, every once in a while (1 in say 8-9 days) it will work for a day or so before the problem starts again. My computer is a HP Pavilion Media Center m8226x running on Windows Vista Home Premium. I came here for help a while back and found out it wasn't malware using HJT and another malware sweeper, yet the problem persisted. This makes me think it is hardware. It got so bad I did a system restore (no CD, just F11 on the comp) and ended up losing all my pictures/files, but this did no good. Finally I went in to get my files restored professionally as well as to have the problem fixed (no luck, but cost $300 anyways) and ended up with a new hard drive. Yet the BSOD's continue. They happen whether or not I am online, and even in safe mode. I have never installed new devices to my comp until the new hard drive was put in, but the prob started before that so I doubt it is it. I took it back in for help, but they said it never got the BSOD while there (either t... Read more

Read other answers
RELEVANCY SCORE 45.6

Hello,

TL;DR; Attached two files. the forums program was implemented, but I also attached BlueScreenViews DMP files. Would like to run sfc /scannow without failure. Please assist.

I am a fairly tech friendly individual, but I'm stumped on what is exactly going on with my computer. I built this machine about 2 years ago, and I have had the occasional BSOD, but with a restart it would fade out. This time is not that case. I tried fixing it, but I may have made it even worse. I usually use my computer for gaming, but I also use it for work related reasons.

I only run windows defender currently, but previously ran anvisoft. This was also a possible problem, which I removed. When I run sfc /scannow it can only reach 62% before failing, and instructing me of a corrupt file that cannot be fixed. When I run Memtest it finds no errors. I have no previous backups. I don't believe it to be temperature related. I have run multiple diagnostic tools, and have yet to find a solution. Including creating a windows repair disk. I mostly get my BSODs during or after I close a game. Most recently its been Star Wars Battlefront. You'll find the attached files with my computers information as well as a copied txt file from BluescreenViews. That said it seems to be missing some of my most recent BSODs. Please assist I am at my wits end. Thank you in advance.

Read other answers
RELEVANCY SCORE 45.6

Hi everyone,

at the end of december my pc started to show me bluescreens. I didn't pay much attention because that happens once in a while. After a few days of rebooting every 20 minutes i decided to reinstall windows and till now it ran very well. Now it's starting again and i have bluescreens every day one or more times an hour. Sometimes they are caused by afd.sys but i found a "cure" for that i think by editing some of the parameter in the registry that we're posted by a local tech-magazine. Then there were some BSODs caused by klif.sys belonging to Kaspersky Internet Security. There was a fix for that in the registry, too, telling the program to load its drivers after winxp has finished loading its main drivers. After that, i got blue screens telling "BAD_POOL_HEADER" and some without a hint what happened despite the memory address 0x00...

I don't know what to do anymore. I found this forum and a post where someone was asked to upload the dmp-files and a Belarc-Report. I zipped these files and uploaded them so you can get them from the link below.

Perhaps somebody can help me finding out what is wrong with my system.

Regards,

CoRe

LINK

Read other answers
RELEVANCY SCORE 45.6

Hello. I have recently been experiencing multiple BSODs a day. I read the posts on How To and got the file zipped down to size. Can someone please help me figure out where to start to solve this problem? Thank you for any help.

A:Please Help! Multiple BSODs!

Here is my dump file. Thanks.

Read other 9 answers
RELEVANCY SCORE 45.6

Hello, so my desktop has been getting many different BSODs for a while now.
I mainly use my laptop and every time I try to fix my desktop I just give up and forget about it.
I decided finally to seek help. BSODs happen randomly, with seemingly no trigger or pattern. Please help me out!

A:Multiple BSODs, please help!

Only one dump from 2014 and back in January.
Please follow the tutorial to enable "Small Memory Dump" Dump Files - Configure Windows to Create on BSOD






Quote:
Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Read other 3 answers
RELEVANCY SCORE 45.6

Hi all, so while I was streaming videos to my ps3 on ps3 media server I was watching a show, then my pc crashed. I couldnt restart, couldnt boot at all. So moved ram, and eventually removed one of my 2gb modules and got it to boot so I could post this. But in between getting here I tried all different combinations and had about 5 BSOD very shortly after getting into windows.

OS - Vista/ Windows 7 ?? 64bit ? Win7 ? retail version ? 1-2 years ? 4-5 months ? CPU ? MSI ATI radeon 5830 twin frozr ? Asus m4a88td-vevo usb3 ? Huntkey 700W bleak this happened just before D3 release
thanks

Read other answers
RELEVANCY SCORE 45.6

Hello. I've been getting quite a few bsods lately and I just reformatted a couple days ago. I get a couple different error messages but the most frequent ones are irql_not_less_or_equal and bad_pool_header. When the bsod comes up, it almost automatically restarts. There is no specific file or memory dump, however on one occasion i saw the file "splitter.sys" pop up. Can I get some help with this please?

Thanks!
 

A:Multiple BSODs

For clarification, are you saying that after it Blue Screens and you check the minidump folder you find no minidump files?
 

Read other 14 answers
RELEVANCY SCORE 45.6

I can't even get the computer to start most of the time, I managed to get in long enough to get these dumps. Please help.
 

A:Multiple BSODs

Nothing definitive was cited. However, with your symptoms and the various error codes you have there is a very strong possibility your issue is corrupted memory. Therefore, we suggest you run Memtest on your memory. It is safe, free, and engages right after boot-up.

See the link below and follow the instructions. There is a newer version than what is listed; use the newer. If you need to see what the Memtest screen looks like go to reply #21. The third screen is the Memtest screen.

Step1 - Let it run for a LONG time. The rule is a minimum of 7 Passes; the more Passes after 7 so much the better. The only exception is if you start getting errors before 7 Passes then you can skip to Step 2.

There are 8 individual tests per Pass. Many people will start this test before going to bed and check it the next day.

If you have errors you have corrupted memory and it needs to be replaced.

Step 2 ? Because of errors you need to run this test per stick of RAM. Take out one and run the test. Then take that one out and put the other in and run the test. If you start getting errors before 7 Passes you know that stick is corrupted and you don?t need to run the test any further on that stick.


Link: http://www.techspot.com/vb/topic62524.html


* Get back to us with the results.


*** If Memtest shows no errors then find the voltage specs of your RAM and compare it to the voltage setting in your BIOS. Do they match?

*** Also, we note you are still ru... Read more

Read other 22 answers
RELEVANCY SCORE 45.6

Hi guys,
Short bit of background, my computer just had a new mobo installed four months ago after the old mobo died and fried the HD.  So new mobo, new HD, clean install.
I first started getting BSODs a little over a week ago only when playing Flash games.  I am still under warranty through Best Buy so took it to them suspecting memory failure.  They kept it for two days "running diagnostics" and said all the hardware is fine and had no other suggestions but a clean install.
 
That's kind of a PITA so I'm hoping to avoid it.
 
I uninstalled Avast and installed Microsoft Security instead as I've seen that suggestion while Googling; since then I have gotten three BSODs just any old time without doing anything very system intensive.  Woke up to a BSOD this morning after the machine was (supposedly) sleeping overnight.
I have not been able to figure out which driver I need for my Nvidia graphics card so have yet to do that - I will certainly look harder if that appears to be the issue though.
 
I tried to run Windows' memtest and got a BSOD while running the test which again makes me think memory, but Best Buy swears that's not it.
 
Here are the minidumps (also attached.)
 
==================================================
Dump File         : 073113-18174-02.dmp
Crash Time        : 7/31/2013 1:27:44 PM
Bug Check String  : SYSTEM_SERVICE_EXCEPTION
Bug Chec... Read more

A:Multiple BSODs, help please?

Hi
 
to the Bleeping Computer.
 
We need to collect some basic info to analyze and find the reason behind the crashes. So please follow the below steps.
 
Upload the crash dumps for analysis
 
Open C:\Windows\Minidump folder. Copy and  zip the entire contents of that folder and upload to any free file hosting site of your choice. You may have to disable User Account Control to copy them.
 
Example file hosting sites :
 
https://www.box.com/
 
http://www.mediafire.com/
 
http://www.sendspace.com
 
Post the download link to the dumps in next reply.
 
 
A Speccy report about your system
 
  Generate a report about your system using Speccy by reading the guide below. Make sure to run the Speccy after running the system about one or more hour. This will give us an indication of current CPU -GPU temperature status.
 
   http://www.bleepingcomputer.com/forums/t/323892/publish-a-snapshot-using-speccy/
 
 Post the web link displayed by Speccy in next reply.
 
A Minitoolbox log
 
  Download Minitoolbox from the below link.
 
http://www.bleepingcomputer.com/download/minitoolbox/
 
  Run the tool and only select the following tick boxes.
 
    -List last 10 Event viewer errors
    -List installed programs
    -List devices
    -List users, partition and memory size
 
Now click "Go" and post the output in nex... Read more

Read other 4 answers
RELEVANCY SCORE 45.6

Hi,
Sysytem spec:
Windows 7 Home Premium x64 OEm
System age 16 months
OS last reinstalled about 2 months ago.

I've attached a zip file with the Windows_NT6_BSOD_jcgriff2folder & the PERFMON HTML file as described in the posting instructions thread.

I have been having BSODs randomly for the last few months (prior to and after reinstalling the OS). SOmetimes it goes weeks with no crashes, othertimes I get multiple crashes a day.

Any help in identifying the causes and solving the problem will be greatly appreciated.

A:Multiple BSODs

  
Quote: Originally Posted by zzchess


Hi,
Sysytem spec:
Windows 7 Home Premium x64 OEm
System age 16 months
OS last reinstalled about 2 months ago.

I've attached a zip file with the Windows_NT6_BSOD_jcgriff2folder & the PERFMON HTML file as described in the posting instructions thread.

I have been having BSODs randomly for the last few months (prior to and after reinstalling the OS). SOmetimes it goes weeks with no crashes, othertimes I get multiple crashes a day.

Any help in identifying the causes and solving the problem will be greatly appreciated.



You uploaded the app instead of the results

try this method
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.

To ensure minidumps are enabled:

Go to Start, in the Search Box type: sysdm.cpl, press Enter.
Under the Advanced tab, click on the Startup and Recovery Settings... button.
Ensure that Automatically restart is unchecked.
Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
OK your way out.
Reboot if changes have been ma... Read more

Read other 9 answers
RELEVANCY SCORE 45.6

So i have a relatively new build with the following specs:

ASROCK z77 pro4 lga 1155 intel z77 HDMI SATA gbs/s USB 3.0 atx mobo

Crucial M4 CT128M4SSD2CCA - primary windows partition

EVGA GeForce GTX 670 2gb 256 bit GDDR5

Seagate 1TB 7200 rpm

Corsair Vengence 16gb DDR3

Intel core i5-3570k ivy bridge 3.4 ghz

The PC booted fine and worked quite well for a few weeks. Yesterday while playing dota2 my game crashed and computer BSODed giving me a IRQL not less than or equal error. I looked up some info on this which said that it is likely related to the memory or the drivers. I have yet to run a memtest which will be my next step but i have some other complications. I have gotten other BSODs such as page fault in non paged area, system service exception, and bsods with stop errors but no explicit error. Once i run the memtest is there any other places i should look or diagnostic tools i can run to find out more information? I'm hoping i don't have a failing HD(in this case the SSD). An y help or insight into these BSODs would be very useful.

Edit:Looks like its pretty much 100% the memory after running memtest for about 5 mins it yielded many errors(1k +). I will test each individual stick and report back.

Thanks,
Sheeplauncher
 

A:Multiple different BSODs

with memtest you need to run 6 passes on one stick at a time

or it will report errors where there are not any

psu

make
model
wattage
 

Read other 1 answers
RELEVANCY SCORE 45.6

Was running clean since installing windows 10 this past summer. Recently within the last few weeks I experienced a few blue screens. After a system restore I am still having issues. This DM log has the last five crashes I believe.

Any help is appreciated.

A:Multiple Different BSODs

Diagnostics Test

 System File Check

Please try following:
Open an admin command promptCopy/paste "sfc/scannow" (without quotes) and press enterWhen it finished reboot your systemOpen again an admin command promptEnter sfc/scannow again
If sfc/scannow says "Windows Resource Protection found corrupt files but was unable to fix some of them" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is too large try a 3rd party uploader like dropbox, onedrive, google drive, mediafire etc.
System File Check(SFC a.k.a. Windows Resource Protection) needs to have your system rebooted in order for sfc to try to fix the problems that it finds.



Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums


   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.
The Intel network drivers have been flagged but I believe it is due to memory corruption

Code:
ffffd001`135cd428 fffff800`eb13b6dbUnable to load image \SystemRoot\System32\drivers\e1i63x64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for e1i63x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1i63x64.sys
e1i63x64+0x1b6db

2: kd> lmvm e1i63x64... Read more

Read other 1 answers