Over 1 million tech questions and answers.

D-link router and dsl modem connection problems

Q: D-link router and dsl modem connection problems

I have a D-Link router with a Bellsouth Westel modem in Bridged mode. It will work for some time and eventually I loose my network. I've been through the ringer with BellSouth and D-link tech support. It's as though the modem won't stay bridged. D-link had me set the router to enable DHCP as well as leave the modem unbridged. I know that eventually, they will conflict and I will lose my connection. Please help

RELEVANCY SCORE 200
Preferred Solution: D-link router and dsl modem connection problems

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: D-link router and dsl modem connection problems

Try another router

Read other 1 answers
RELEVANCY SCORE 77.6

The same modem and router were hooked up in my last house and I used the same computer. I moved to another house and within a week got the internet working again but now I have to use the Ethernet cable through my WebSTAR modem at all times. When I plug in the D-Link DIR-601 router the globe sign lights up and so does all the port lights 1,2,3 and 4 but not the power light or the one that looks like half circle bars ( I'm guessing like a signal sign). They stay on and do not flash. I tried hooking an Ethernet cable from the modem to the router to the computer ( does not work) I tried hooking the Ethernet cable just to the modem and router and it does not work, I tried resetting them both in a hundred different ways by unplugging, reset buttons, different patterns, 10 secs and hour so on. The internet doe work only when connected to the computer directly from the modem with the Ethernet Cable. What is going on here? and did I explain this good enough? I'm not the best at understanding computers and would need a step by step kind of help. Thank you in advance if you can help!
 

A:Solved: D-link wirless router DIR-601 problems with WebSTAR Modem

Read other 11 answers
RELEVANCY SCORE 74

Hi everyone.

I work as a tech consultant, and I am stumped on this one.

I am working at a clients house. She has purchased DSL sevice though a hole-in-the-wall company called superpa.net.

They have given me particular parameters to make the computer connect to their POS system.

Set IP Address: 192.168.1.3
Set Default Gateway: 192.168.1.1
Subnet Mask: 255.255.255.0
Preferred DNS Server: 63.169.216.98 alternate 204.117.214.10
Well that is all fine a good and the computer connects just great. But my client just bought a new laptop and wants wireless. Wireless is simple, well it should be.

I got her a basic Linksys Wireless-G WRT54G Router. Nothing Fancy.

Now obviously, the router must use the same setting as the computer. So I went in to the Config, and made it a static ip with all of the listed above. I changed the computer back to the auto obtain ip address and dns server, but I HAVE NOTHING!

The modem shows a conncetion to the router, and her computer shows a connection the router, but there is NO activity between the modem and router. No activity=No Internet
I called Linksys, they told me to contact my ISP, then called Superpa.net, they said they dont do any support for wireless, only for one hardlined computer. They would sent someone out to fix it $200/service call + $60/hour... I said forget it.

Anyone with any suggestions or solutions... I would be much abliged!!!!

Thanks,
Chris
 

A:Router DSL modem connection problems

I trust that you power cycled the modem when switching from computer to router.

If the Linksys LAN defaults to 192.168.1.x, change it to 192.168.0.x.

EDIT: and clone the computer's MAC address to the router.
 

Read other 3 answers
RELEVANCY SCORE 73.2

I can connect to internet only with land line I cannot get my wireless to connect, It wants to connect then drops right away, What am I doing wrong?

A:connection problems belkin router att modem

Log into your Router setup and see if you are using the B or G or N settings. If using N, try G. If your using automatic, try B/G setting. etc. Reset the WPA-2 password.

Read other 2 answers
RELEVANCY SCORE 73.2

I'm having problems with my internet connection and modem/router. It's an Actiontec gt704wg, which serves as both a modem and wireless router. One computer is connected directly to the router and 2 others use wireless. The connection just randomly cuts off, the internet light goes blank, the dsl light flashes, and then it takes about 15-25 seconds to reconnect. I get tons of static on my phones, and the frequency of disconnecting goes up whenever i get/make a phone call. In addition, when I connect the other computers wirelessly, i get tremendous delays and more disconnections, and it takes several minutes to reconnect. The router's not old, about a year, and I've had no problems with it until recently. I've changed all my dsl phone filters, so I know it's not that. Can anyone help me?
 

A:internet connection, Router/modem problems

It sounds to me like something wrong with the router or, less likely, wireless interference. Looking at the second one first, do you detect any other wireless networks on your same or close to your channel? Any 2.4Ghz cordless phone?

Next I suggest looking for a firmware update for the router. And my final (at least for now) suggestion is to reset the router to factory default settings and reconfigure.
 

Read other 1 answers
RELEVANCY SCORE 72.8

Hi guys

I've just bought a D-Link Wireless Router and USB network card and, after loads of messing around, I've managed to connect to the Internet, but now it's really quite slow. I moved the USB card to another port which has increased the speed, but it's still not at the levels it should be (although Windows says I'm getting between 15 and 60 Mbps.

I tried altering so many setting just to get the Internet connected that it's quite possible I have changed something I shouldn't have. Or could it just be the speed of the USB, and if so, how can I improve this?

What kind of information do I need to provide to get some help on this?

Thanks in advance.

SOS.
 

A:Various problems with PPPOE internet connection and D-Link Wireless N Router

Read other 6 answers
RELEVANCY SCORE 71.6

I'm wondering maybe someone could help me or make a good suggestion/advise!
I'm little bit worried. I bought wireless netgear dg834gsp ADSL modem router, but i don't have ADSL connection. I have cable connection. Does this mean that my router is unusuable for my PC and my internet connection? Maybe there is some hope to make connection? I don't have any possibilities to change it, because I bought it abroad.
 

A:netgear dg834gsp ADSL modem router connection problems

You can connect/configure it as an ethernet switch (if it has multiple LAN ports) and wireless access point, but you cannot use it as a router except with ADSL internet service.
 

Read other 2 answers
RELEVANCY SCORE 70

I have a significant problem with my computers not recognizing my d-link router. I screwed something up today and now my router won't work. I have had the router for years working just fine, but today I was trying to connect a new kindle which wouldn't connect to the Wi-Fi and I lost the router after screwing around with configuration.

Basically I've been trying to re-install the router, I changed the SSID but it appears the d-link quick router setup software recognizes the modem as the router and won't re-intall my router thus denying me access. Has anyone ever ran into a situation such as this? Please help...
 

A:D-Link Software recognizing modem as Router, router not working

Find the reset switch (usually a smal hole and you press a paper clip into it for ~5sec).

That will bring it back to day-1 default settings.

Unless you are attaching to the modem/router using USB, there's no software to be installed
(that's only used for USB) - -
just cable the eithernet cable to a LAN port on the router and then you can configure it
 

Read other 1 answers
RELEVANCY SCORE 68

My service provider just gave me the new Westell E90 router modem but with out informing me that its a router.

I already have a D-link DI-624 wirless set up and I am getting the internet connection fine, but I'm unable to access my computer remotely using PCAnywhere (or other apps) like I was before using port forwarding.

I don't understand Lan/Wan too much or DHCP or Bridge or PPoe so if someone can give me a hint I would appreciate it.
Strangely, I had a dynamic ip address before , but its not changing everyday now. ??

I got to the Westell config area but still haven't been able to set it up right.
I'll try to give some info here to help u help me.

D-Link gateway - 192.168.0.1
D-Link Submask - 255.255.255.0
DHCP Server - enabled

Westell VC1 Config - Protocol: Bridged
VC1 - Bridge Settings - mode: Routed Bridged
DHCP - enabled
Subnet Mask - 255.255.240.0
Gateway - 72.49.16.1

Westell discovered local devices:
di-624 - 192.168.200.253

Westell Private Lan DCHP start address 192.168.200.10
Westell Private Lan DCHP end address 192.168.200.253

Westell Public Lan DCHP Server Enable - not checked
Westell Public Lan Ebable - not checked
 

A:Westell Router/Modem with D-Link Router

Ok, very inofrmative

Microsoft(R) Windows DOS
(C)Copyright Microsoft Corp 1990-2001.

C:\DOCUME~1\ALANCO~1>cd\

C:\>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : ALAN1
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : SiS 900 PCI Fast Ethernet Adapter
Physical Address. . . . . . . . . : 00-16-EC-45-9B-6C
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 216.68.4.10
216.68.5.10

C:\>


My Wan IP is a 72.49.xxx.xxx number so .... ?


It seems like I need to some how make the westell just a bridge(?) so that it doesn't assign ip address and allows the D-link to be the router??

thanks
 

Read other 12 answers
RELEVANCY SCORE 66.4

I'm a bit of a rookie when it comes to Networking but here goes.

I've got a D-Link DSL-604+ 22Mbps Wireless router with built-in ADSL modem and a D-Link DI-624 108Mbps Wireless Broadband router.

Obviously the DI-624 that I recently purchased doesn't feature an in-built modem so instead of blowing $50 on a D-Link ADSL modem with Ethernet connectivity I was hoping to use the ADSL modem feature in my old Wireless router (604+) as my modem for the DI-624.

I called D-Link support but unfortunately after an hour of following live instructions from their support staff, I ended up nowhere.

They instructed me to disable DHCP and NAT features on the 604+ and plug an ethernet cable into it's LAN PORT 1 and plug the other end into the WAN PORT on the 624.

I plugged an ethernet cable into the DI-624 LAN PORT 1 and into my computer's Ethernet port in order to configure the DI-624.

After configuring the DI-624 via its web configuration web page, I could get the 108Mbps network up and running but without the access to DSL.

If anyone any of the above mentioned products and can provide a tip or a link to a guide or something, that would be great.

Thanks
 

A:Using a D-Link DSL WiFi Router as a Modem

Read other 6 answers
RELEVANCY SCORE 66.4

motorola 3347 02 1022 previously used as both modem and router to at&t dsl. changed mot to just modem. installed d link dir 655 as router. d link gets solid globe lit up indicates internet connection to mot. but d link does not receive any internet signal from mot. d link quick router setup cannot connect to mot. which step am i missing? thank you.
 

A:d link router cannot see motorola modem

Some things to check.
Make sure DHCP is disabled on the motorola and enabled on the dlink.
Make sure the motorola is not using the same local IP as the dlink.
For DSL,you probably want the dlink set to PPoE (point to point over ethernet).
 

Read other 1 answers
RELEVANCY SCORE 66.4

Hey everyone,

I am new to setting up routers since I never bought a router before. This is the first time I actually bought one. I ordered the D-link DIR-815 router online at Walmart.com, and I'll be receiving it this Monday which is the 14th, so I am asking my questions on here now, so I could be prepared. Please let me know what questions everyone has one for me.

1.) I don't have a wireless card in my PC, so I will be connecting wired to get WiFi via WAN and LAN ports, right? First before I forget, I have a Windows 7 32-bit desktop PC if that helps. We are working with a DSL modem residential line without phone line using a coaxial cable, and Ethernet cable from modem into the PC. May someone please provide step by step walk through instructions by connecting this D-link router to my modem and WiFi, and for me to use the WPA2 security?

2.) I have an iPhone 4 with Verizon. If I want to use my iPhone to get WiFi from the router, and turn off the Internet on my phone, and use WiFi only on my phone, how would this work?

Thank you if someone could provide info!
 

A:How to connect a DSL modem to a D-link DIR-815 router?

Read other 8 answers
RELEVANCY SCORE 65.6

We recently moved to a rural area where the only internet service we can get is dial-up or satellite internet service. We chose Hughesnet and got the HN9000 modem and we're having trouble connecting the D-link router to use for our other computers (it works fine when the modem is directly connected to my tablet via Ethernet cable). We've contacted hughestnet and they said the d-link will work with it but couldn't be more specific. Can you please tell me what to do to get the router to work with the modem.

Attached is the information collected from running IPCONFIG /ALL as well as
Thank you

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

Windows IP Configuration

Host Name . . . . . . . . . . . . : TecraM4
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Ethernet Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller
Physical Address. . . . . . . . . : 00-0E-7B-A2-A3-9B
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.0.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 67.142.167.10
67.142.167.11
Lease Obtained.... Read more

A:D-Link DIR-615 Router and Hughesnet HN9000 modem

that ipconfig /all info is a router
and looking at this link http://www.hughes.com/ProductsAndTe...stem/Pages/HN9000BroadbandSatelliteModem.aspx right at the bottom , the modem is in fact also a router
also confirmed in the user manual http://www.viasatelital.com/manuales/Instalacion-HN9000.pdf

so to connect two routers together see below

------------------------------------------------------------------------

Connecting two (or more) SOHO broadband routers together

Connecting two (or more) SOHO broadband routers together
Shamelessly stolen from a John Will Post

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, en... Read more

Read other 1 answers
RELEVANCY SCORE 65.6

I recently moved to a rural area where the only internet service I can get is dial-up or satellite internet service. I went with Hughesnet and got the HN9000 modem and I am having trouble connecting the D-link router to use wireless for my laptop. I contacted hughestnet and they said the d-link will work with it but couldn't be more specific. Can you please tell me what to do to get the router to work with the modem. Thank you
 

A:D-Link Dir-615 router and HN9000 hughesnet modem

Let's see this when connected directly to the Hughesnet modem.
Hold the Windows key and press R, then type CMD then press Enter to open a command prompt:

In the command prompt window that opens, type type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

Read other 1 answers
RELEVANCY SCORE 65.6

I'm using Windows XP and have reciently switched to SBC/DSL. After hrs and hrs on the phone with SBC's techs, we got my #1 computer running on the DSL. I bought a D-Link DI-604 router and followed the "fast and easy setup". When I rout thru the router I lose the "Internet connection". I can plug in my #2 directly to the modem and connect to Internet fjust fine but not thru the router. Do I have a bad router?
 

A:Solved: d-link router won't work with DSL modem

Read other 11 answers
RELEVANCY SCORE 65.6

I am running MAC OS Sierra 10.12.6. Two days ago my wifi stopped working. I checked my Belkin ROUTER first and saw that the internet light was red. I then checked my MODEM provided to me by Morris Broadband and saw that the internet light was green. So I connected my computer directly to the MODEM to confirm that I indeed did have internet. I did have internet so assumed my ROUTER had stopped working as it is a few years old. I purchased a new TP-Link AC2300 ROUTER and connected it to the MODEM but unfortunately I had the same problem, no internet through the ROUTER. I called my ISP and they said I need a new MODEM because the one I have is 4 years old and it will not support the more advanced TP-Link AC2300. This morning I got the new ARRIS CM820A MODEM from Morris and powered it up and connected my new ROUTER and the problem still exists. I can get internet when my computer is directly connected to the MODEM but when the TP-Link router is connected to the modem the router does not detect an internet signal (Showing Red Light). Since I am having the same problem with both new/old routers and both new/old modems I am assuming the problem is with the config in MAC. Help....
 

Read other answers
RELEVANCY SCORE 65.6

I recently bought a TP Link TD-W8980. I set it up and it was brilliant. Duel band, very fast and reliable. Then one day I couldn't connect to the internet. I rang my ISP who went through all the settings with me and they told me it must be the router. I rang TP link helpline, they got me to reset everything go through settings again and told me it must be the ISP. I called them, they told me I am getting connection and try the old router they provided and it worked and still does, so I presumed the router was broken. I sent it back, got a refund and ordered the same router from a different company as it was now cheaper, so I know it's not the same router returned to me, but it still won't work. I attached a few screen shots from the diagnostic report and other information if anyone knows what they mean. If anyone has any ideas what could be wrong I would really appreciate it. Thanks.

A:TP Link TD-W8980 ADSL2+ Modem Router. Please help!

I forgot to mention. My mother bought the same one and uses the same ISP as me and hers still works.

Read other 25 answers
RELEVANCY SCORE 64.8

Step one, turn off power to everything. Step two, connected modem to router and router to computer and powered up modem. Waited for lights and powered up router. Waited for lights and powered up computer.....Limited or no connectivity for wireless connection. Configured DNS and connection to router was good. However, cannot access router and still no Internet connection. Below I will list original config with just the use of cable modem:

98.199.6.2
255.255.252.0
98.199.4.1
68.87.66.18
68.87.85.98

The default gateway for the router is 192.168.1.1, however when I go to command prompt the config info looks something like this:

169.254.253.77
255.255.255.0
169.254.253.77
68.87.66.18
68.87.85.98

Anyway, you can see my problem. I need help because I am at a lost on how to get my money's worth.
 

A:Solved: Comcast modem and D-link Wireless router

Read other 10 answers
RELEVANCY SCORE 64.8

My desktop recently broke so i bought my first laptop. I have AT&T DSL and i bought a new D-Link DSL-2640B modem/router so i could have wireless internet. I called for help on installing it and i was able to use it with the ethernet cable, however when i tried to use wifi, it worked for only about 2 minutes before it disconnected.. Now when i try again it says that it is connected (full 5 bars) but it also says there is no internet access and i cannot use the internet. I need help fixing this problem.

Also, before, with the old modem i was able to just connect the ethernet cable to the laptop and just start using the internet. Now i have to connect by putting in my username and password provided by my ISP almost like if it was dial up. I don't know why i have to do this now but not before.

please help, thank you
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 380 @ 2.53GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 4
RAM: 3758 Mb
Graphics Card: Intel(R) HD Graphics, 1751 Mb
Hard Drives: C: Total - 466182 MB, Free - 424966 MB;
Motherboard: Sony Corporation, VAIO, N/A, N/A
Antivirus: Norton Internet Security, Updated and Enabled
 

A:New D-Link Modem/router connected but no internet access

Read other 6 answers
RELEVANCY SCORE 64.8

Hi,

I've been using a D-Link EBR-2310 (wired) router in conjunction with Time Warner Road Runner Internet service for several years now. The other day, we decided to upgrade our service to cover telephone as well. As a result, Road Runner came in and replaced our old modem with a new one that works for both telephone and internet. The problem is, the D-link router does not work with this new modem. If I connect the computer directly to the modem, everything works fine. But the modem... no luck.

The model and make of the modem is: Arris Touchstone Telephony Modem, Model TM602G.

What I have tried in a nutshell...

Cloned PC's MAC Address on router
Power Cycled Everything
Updated Router to latest firmware

What I have tried in detail

Normally when the internet is connected, the modem has a "Link" light which flashes somewhat quickly. When it is hooked up to the WAN port of the router, it does not flash. Curiously, though, if I hook it up to a LAN port on the router, it flashes as if it works. But there's still no internet. And when I access the router's settings through a web browser (entering in 192.168.0.1), it shows no IP address.

D-Link provided a set of step-by-step instructions which I found under their FAQ, how to configure the router to work with cable. They basically went through cloning my PC's MAC address, power cycling both the modem and router in a specified order/duration, and telling the router to renew its DHCP release.

Th... Read more

A:Solved: D-Link Router not working with Arris Modem

Read other 15 answers
RELEVANCY SCORE 64.8

I just received a Westell 2100 Wirespeed Dual Connect DSL modem that I ordered. I also have a D-Link DI-604 Ethernet Broadband Router which I've been using for a while now to network the two PC's that I have.

The Westell is up and working (which is how I am connected now). What I want to do is connect the Westell DSL modem to the D-Link DI-604 Ethernet Broadband Router (so that I can share the Internet connection, and still have a network connection between the two PC's also).

The problem that I am encountering is whenever I hook up the
D-Link, I cannot establish an Internet connection, nor connect to the Westell or D-Link's setup through their IP's, as if connecting the D-Link is causing some sort of blockage in the network.

When trying this, I connect a CAT5 cable from the WAN port on the D-Link router to the ethernet port on the Westell DSL modem, and both the PC's are connected to the ports 1 and 2 of the D-Link router.

I can ping the Westell and D-Link's IP's but I get no response. If I disconnect the D-Link router I can enter the setup of the Westell modem, if I disconnect the Westell modem and connect the D-Link then I can conncect to the D-Link's setup IP. With both connected I can't do either one.

Ideas?

Note: I updated the Firmware on the Westell Wirespeed Dual Connect DSL modem and it is now up to date.
 

A:Westell DSL Modem + D-Link Ethernet Bbnd. Router

Update: The Westell DSL modem needed to be set as "Bridged Ethernet" and the D-Link had to be setup for PPOE.

In other words, it working now .
 

Read other 10 answers
RELEVANCY SCORE 64.8

Need help, been trying to get this set up for a week, no luck. Tried ringing TP-link but can not understand what they are talking about. I am a novice computer user, but understand plain english instructions.
Here's what i am trying to do...... TP-Link 8616 adsl modem + TP-Link 1043 Gigabit N wireless router.
I plug in the modem, power & telephone connection (orange broadband, not dialup). Connect the only lan port on the modem to the WAN port on the router. Connect the router lan port to my computer running Windows 7. I can see the router in my network, but there is no internet connection.
Can anybody point me in the right direction, before this drives me insane. I have definately got an internet connection because i am replacing a netgear modem router combined which works fine.
 

A:Solved: How to connect tp-link modem to tplink router.

... can not understand what they are talking about.Click to expand...

I doubt that lack of understanding has anything to do with you. The TP-Link 8616 is a modem/router combo, but even their user guide refused to say that anywhere. Its default LAN IP address is 192.168.1.1, and I'm guessing that's the same as for the other TP-Link router. Glancing through the manual I saw no way to bridge the 8616 (make it work as modem only), so you have two choices if I'm right about the LAN subnet used by the 1043. By the way, I could find nothing about that router, but did find information on TP-Link TL-WR1043N and TL-WR1043ND routers.

a. Change the subnet used by one of the routers; e.g., to 192.168.3.x.

b. JohnWill's procedure (Aug. 30, 2008) for configuring a secondary router as a switch and, optionally, wireless access point follows.

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 19... Read more

Read other 2 answers
RELEVANCY SCORE 64.8

I have a D-Link 2740B with the 2 antennas and sloping black case and for some reason I now can't seem to login to the web GUI via 192.168.1.1. The modem is working OK but there is a setting I need to change.

IE says "Internet Explorer cannot display the page"

A friend then recommended trying Firefox. This worked the first time but now it is not connecting either.
On http://192.168.1.1/ I just get a blank screen.

I've turned the power off on the modem for 15 minutes and back on, and rebooted the computer.

I've also tried turning Norton Antivirus & Firewall off but this didn't make any difference.

I run Windows 7 Home Premium 64 bit with SP1.

I've avoided resetting the modem as I am of the understanding that means I have to start from scratch with all the settings.

Is that the only way out here or is there something else I can try?
 

A:Solved: D-Link 2740B Modem/Router - Can't Login to web GUI

Update, I've reset the modem twice to factory settings, gone through setup and still no joy.

100+ views, where are all the gurus?
 

Read other 2 answers
RELEVANCY SCORE 64

Hello,
I bought a standard Westell modem for AT&T highspeed DSL because I already had a D-Link dl524 wireless router which I was using for cable high speed. AT&T helped me set up the system direct to my PC without the router and said they couldn't help me add the router to the set up. I want to be able to connect my laptop to the internet using the wireless router. Based on what I've read, I think I have to change some settings but have no clue as to how to do this. Any help in this matter would be deeply appreciated. PC uses XP and the laptop uses Vista.
Thanks,
Steve Wilson
 

A:Need help adding D-Link dl524 wireless router to Westell modem for AT&T dsl

Read other 8 answers
RELEVANCY SCORE 64

Hi all. I got a linksys cable modem which I am on now and a Dlink WBR-210 Router. First problem I have is that I can't get the router to connect to the internet. I plug in everything right, go through the online setup, and after i push the connect button it either freezes, or just goes right back to log in screen.

I also tried this in all browsers (IE,MOZILLA,SAFARI)

Everything was working until my mom did something stupid and reseted the dlink router. I also can't get my linksys modem to connect to xbox live to play cod5 lol, but I could always connect it when I had my router and modem hooked up.

I am running Windows Vista and heres my ipconfig from the computer connected with the cable modem(no router) If anyone needs anything else please ask.

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\user01>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : SteffzJoint
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR5B91 Wireless Network Adapter
Physical Address. . . . . . . . . : 00-23-4E-30-69-D4
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enable... Read more

A:D-link router won't setup to internet. Cable modem alone works though

Hi;
I think I know what your problem is.

You need to reboot both the cable modem and the router, but it needs to be in this order:

Unplug power from both devices.

Re-check that all data cables are properly connected.

Wait at least 30 seconds

Re-connect power to he router ONLY

Wait for the router to complete boot (usually about 10 seconds or so)

Re-connect power to the cable modem, and wait for it to complete boot.

Router should indicate it had WAN connection, and cable modem should indicate that it has all connections.

Re-check your browser.

If this does not work, re-post. I have more steps, but I think this is all you will have to do.

The reason for this re-booting process is that when power is removed from the router, the cable modem tends to forget the address of the router.
The router needs to be fully booted before the cable modem is powered up, so that it will find the router.

I have always had to follow this procedure after a power outage.
I have cable modem from Cablevision (Optonline) in New Jersey.

Hope this works for you.

FW
 

Read other 1 answers
RELEVANCY SCORE 62

Hello!

I have D-Link DSL 320T ADSL Modem and Belkin N+ Wireless Router.
The modem works great on its own connected to the network card in my laptop.
The problem starts when I connect it to the router (doesn't matter wired or wireless connection). The internet works but slower and sort of 'snaps' every few seconds. To give you an example, when I use skype the sound and picture freezes every few seconds or when I click on different websites in my browser, every few seconds I get the 'not connected to the interent' screen - I have to refresh and it loads fine.
All those problems dissapear when I connect the modem to the network card of my laptop.
I tried few things and this is what I found out:
1. When I switch the router into Access Point mode it works great (wired and wireless) as if it the modem was connected straight to my laptop - no snaps, skype works great.
2. It doesn't help when I turn the firewall off in the router
3. It doesn't help when the QoS option is enabled
4. The router is fine as it works great with cable modem

I think maybe there is something wrong because of DHCP option enabled in both devices.

Here is my ADSL Modem Config
DHCP ON
Starting IP 192.168.1.2
Ending IP 192.168.1.254
Subnet mask 255.255.255.0

Here is my router config
DHCP ON
Starting IP 192.168.2.2
Ending IP 192.168.2.100
Subnet mask 255.255.255.0

Please Help
 

A:D-Link DSL320-T ADSL Modem + Belkin N+ Wireless Router Internet Performance Problem

Read other 16 answers
RELEVANCY SCORE 60.8

Hello,

I am new to this forum, thus i like to say hello to everyone.

I have a little problem.

While two computers were using the internet easily through a D-link wireless router the main computer connected to the router via a cable stopped getting network while the other computer getting the wireless network still worked at that very time. Then the guy who was on the main computer complained he could not get online, we opted to reset the router and then the ultimate problem started. None of the two computers got network again.

I don't have an idea what might have happened in the first place, but i tried troubleshooting a lot for somedays all proved abortive.

in the network diagram, it shows

LAN ----> Router ---X-->Internet
So as you can see the Router is the only one not getting the internet that will transmit to the computers. But the LAN works directly with the main computer via the LAN.

Since i know you might want to see some of the things happening behind the scene i got this.

With the LAN direct to computer
.ExternalClass .ecxhmmessage P{padding:0px;}.ExternalClass body.ecxhmmessage{font-size:10pt;font-family:Tahoma;}
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\UP89>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : UP89-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Peer-Peer
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled.... Read more

A:D-link Router works but no connection to internet

Read other 16 answers
RELEVANCY SCORE 60.8

We have a D-Link DSL-2740B all-in-one ADSL2+ Modem Router to which we have our XP Pro SP2 and W2000 Pro PC‘s connected by Ethernet, together with a Brother MFC-845CW printer/scanner/fax.

Our line is rated at 1mps due to our distance from the exchange, but this router does generally deliver the full speed.

Unfortunately the Internet light on this router goes out roughly two to three times per day indicating that the connection has been dropped, this necessitates the router being rebooted to restore the connection. We have sometimes enjoyed up to three days without this happening.

Our old MRI SOHOSpeed router did not suffer this problem, but only gave us a speed of 500kps or less.

All telephone cabling in the house and externally from the pole to the master socket has been renewed.

D-Link took us through the process of resetting the router, and we also checked with Zetnet, our ISP, that all of their settings were correct, but the problem still persists. At the moment it is just an annoyance, although later when accessing our PC remotely over the Internet, when the connection is lost and nobody is there to effect a reboot, this access cannot be achieved.

We contacted the supplier of DrayTek’s Vigor2800VGi ADSL2+ Router with SuperG WLAN to see if their device would perform any better. They replied that it sounded like a 1Mbps connection on our line is very border-line, so it may be that any router connected at 1Mbps on our line would experience disconnections.

We then e... Read more

A:D-Link Router dropping Internet connection.

Read other 8 answers
RELEVANCY SCORE 60.8

Can Anyone help me understand how to do this?
I run XP Home.
I am of "limited" computer skills but try and learn fast if helped.

I have an HP notebook that came with a wireless card inside. I have a broadband ISP that wants to charge to make me to go wireless with there equipement $25 a month. But a year ago I installed a dual wireless/hardwired capable D-Link "DI-524 AirPLUS G Wireless Router" and have been using it only as a hardware firewall with my wired internet connection from my ISP's modem.

BUT now I have a Real Need to go wireless in a few rooms away in my apartment(my boyfriend will continue using his desktop wired to the router where it is now).
The AirPLUS D-Link Wireless capable router came with an installation CD that is SO very confusing to understand the setup.

Has anyone done this and can PLEASE help me with the steps?
PLEASE try and help me set this up?
(I don't want to interfere with my boyfriends wired connection to his desktop, But I need to move aroung here wirelessly on my notebook)!
 

A:Please Help me set up wireless connection from notebook to D-Link router!!

Read other 16 answers
RELEVANCY SCORE 60.8

I have two computers running Windows XP networked through a D-Link DI 604 Broadband Ethernet Router, which in turn is connected to a Siemens Speedstream 4100 Ethernet ADSL Modem. I continually lose the connection and have to press "reset" on the router (actually insert a paperclip into the reset hole.) The period of time that it stays connected can vary from a few minutes to several hours but is usually about an hour. Occasionally I will need to repeat it a time or two before it connects. I bought the router two or three years ago and had the same problem then but I moved and haven't had it or my second computer connected to the internet until yesterday when, of course, it started doing the same thing it had before. Do I need to replace the router or might it perhaps be caused by a setting? I am, unfortunately, in a state of blissful ignorance about networking. Thanks.

Michael
 

A:Regularly lose connection through D-Link router

Read other 10 answers
RELEVANCY SCORE 60.8

We have two computers running Win XP Home. When either computer is plugged into the cable modem by itself, we get a normal high-speed internet connection. But when we plug both computers in via our (wired not wireless) D-link router, after about 5 minutes online the connection slows to a crawl, with pages timing out etc. What's wrong?
 

A:D-Link router slows connection to a crawl

Could be many things, Poss. conflicting firewalls,clear your brouser cache, do a speed test on your modem, power cycle modem clear cookies, do a virus check, check another web site
 

Read other 2 answers
RELEVANCY SCORE 60.4

Hi,

I have an unsolvable problem with my router that results in random disconnects from Xbox Live. I want the 360 to bypass my router by plugging it directly into my modem. Is the correct solution to buy an ethernet network switch hub, plug this into the modem and then plug the router and 360 into the hub? Can anyone please advise what I should be using?

Thanks in advance.
 

A:Modem Connection to 360 and router

no that's not correct. you must use modem--router--otherstuff unless
you want to ONLY use modem--one.box
 

Read other 3 answers
RELEVANCY SCORE 60.4

For work I was given a modem, which they wanted me to hook up directly to my home internet. However, I live in a town home and do not have direct access to it. Instead I have to use a port that I have in my wall. When I plug my modem into the wall the VPN does not light on the modem, which I assume is because I have blocked access as we need to register all our devices using the MAC address. The modem I have is a Cisco 881. Is there any way to find the MAC address if not listed on the device itself?
 

Read other answers
RELEVANCY SCORE 60.4

I just set up a two computer wireless LAN. One machine running WinME is wired to the router, the other W2K machine is wireless about 100 feet away.

Everything works well, I can shut both machines down and restart and it all still works.

However, after shutting down the machines over night and restarting in the morning, the router won't respond. I can't access the router with IE. If I shut down both the modem and router and the machines and reboot the modem then router then the machines it'll work.

On all the other networks I've dealt with, the modems and routers are always left on.

What should I be checking here? Up till now I've never had any problems with this type of setup.

The modem is a Qwest issue Actiontec GT701 while the router is a Linksys wireless 11MB.

TIA
 

A:DSL modem/router connection

It would be helpful to determine if the problem is with the modem or the router.

Can you disconnect the router and connect directly to the modem.
Then leave that computer on overnight.

If there are still problems it would point to the modem.
Otherwise I would start suspecting the router.
 

Read other 3 answers
RELEVANCY SCORE 60

Hi. I am using a D-Link DSL564T Router with the newest firmware with DSL 6000. My problem is that i am constantly loosing my internet connection while playing online games like WoW or Shot-Online. When I look in the router under "status", the message "waiting for response" is shown. Then in do i router reset, and my connection returns. Sometimes i can go a couple of days without a problem, sometimes only a couple of hours, but everytime i reset the modem, the connection is made. I am sure all my settings are correct. I have two computers hooked to this modem, both connected with a LAN cable(no wireless), both with a static ip. Can anybody help me?
 

A:Irregular Connection Loss with D-Link Router DSL564T?

If you're running any P2P applications, try turning them off. They frequently kill a router with too many connections, and that seems to be the symptoms you're having.
 

Read other 1 answers
RELEVANCY SCORE 60

I can connect to the internet just fine if I run my modem straight to my computer. If I try to run it through my router, however, I can't get a connection. The internet light on the router does not light up and shows no signs of connection. The DHCP renewal doesn't do anything, either. I have tried multiple 'solutions' and am completely stumped. I have power cycled many, many times and reset the router to factory settings as well. I have tried cloning the mac address to match the computer and done all that I can (as far as my knowledge reaches). The tech support 'warranty' is also outdated, so there are no other options except for paying a ridiculous amount of money to talk to somebody. As such, any help on this matter would be GREATLY appreciated! I just got a new modem yesterday and that is when it stopped working through the router. This problem occurs with two different routers (both of which worked previously) so I don't think anything is faulty.

The modem is an ARRIS TM602G and the router is a Linksys WRT54G v.3

I will provide as much information as I can on request! I desperately need to resolve this issue.
==================
MODEM (WITHOUT ROUTER)
==================

Host Name . . . . . . . . . . . . : Steez-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : neo.rr.com

Ethernet adapter Loc... Read more

A:Router won't pick up connection from modem

You're sure you are connecting the modem to the router's WAN port?

TCP/IP stack repair options for use with Vista or 7.

Start - All Programs - Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log

Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log

Reboot the machine.
 

Read other 1 answers
RELEVANCY SCORE 60

Tried searching for a solution but couldn't find anything specific enough to my issue.

Any help is greatly appreciated; wired network connections.

ISSUE:
As of right now, I am able to connect to the internet but only directly from my modem to my main desktop. When I have the router connected... there is no network connection on anything connected to router, not even my main desktop. I then started to see if other devices such as PS3 and laptop would work connected directly to modem. No connection can be made; however, everything shows pc activity. The only connection i get to work is when my main desktop is connected directly to the modem. I believe it is a network settings issue, involving router and/or modem. I've tried doing the whole reset router/modem/pc, and disconnecting reconnecting cables solutions but nothing.

Thanks again for any responses and help.
 

A:Connection to Router/ Modem issues...

Read other 6 answers
RELEVANCY SCORE 60

SBC sent me a Westell Proline F90-610025-06 modem/router for my new DSL account. It works fine on one computer, but when I connected it to a second computer through a Linksys switch (ethernet cables), the second computer was not able to obtain a different local IP number from the Westell. Both computers show a address conflict error when they are both on. I pushed the buttons in the advanced section of the Westell menu, but could not find any way to expand the range of IP addresses available. The only option I could find was to change the lease time on IP addresses, or switch from PPPoE to PPPoA. I pushed repair connection in the computer LAN menu, but the computer was not able to get a different IP address. The Westell just kept giving both computers the same IP. This is my first broadband connection, so I am an amateur on connecting them.

Windows XP SP2 I tried powering everything down, and restarting in this order: Westell, Linksys, computers It didn't help. Manually inputting a different IP address on one computer's LAN connection didn't do anything either. How do I get the Westell to give different local IP addresses to different computers?
 

A:Solved: Modem/Router Connection

Read other 16 answers
RELEVANCY SCORE 60

First, thank you for everybody who will take a time to help me.

After power outrage, I cannot set up my modem+router internet connection. I've restarted both several of times, different cable configuration with no luck. I will post my ipconfig /all, first is with router so no connection:
C:\Users\a>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : a-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : C8-60-00-68-40-B5
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::ddaa:363e:abc5:5636%12(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.86.54(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 264790016
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-0A-72-00-C8-60-00-68-40-B5

DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled

This one is without router connected, so only modem and I have connection.

C:\Users\a>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : a-PC
Primary Dns S... Read more

A:No Internet connection modem+router

Read other 12 answers
RELEVANCY SCORE 60

I am having a confusing and frustrating problem, my internet connection is dropping every half hour at least (sometimes more depending on my internet activity). This connection loss is happening when my modem resets and I have no idea why it's resetting. It may be due to some issue with my ISP where I don't have enough bandwidth to spare and I need to upgrade. i'm not sure. (I have Comcast high speed standard package) I am a gamer and I tend to have multiple applications running at a time, I play competitive online games and sometimes I stream music when I play. I also sometimes watch a live stream or YouTube video on my second monitor although it is usually not while I am gaming. I have tried everything I can think of.. I have called Comcast several times and called the companies of my router and my modem, and I have had a Comcast technician come and inspect the my cables inside and outside of my house. I am honestly at my wit's end and I need help..

My modem and router are both new and I highly doubt that is the issue:
Although maybe it is a problem with the modem and router communicating? I don't know.
Here are the models:
Motorola Surfboard SB6121
Belkin N600 DB Wireless N+ Router

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) II X4 965 Processor, AMD64 Family 16 Model 4 Stepping 3
Processor Count: 4
RAM: 8191 Mb
Graphics Card: NVIDIA GeForce GTX... Read more

A:Intermittent connection please help modem/router/isp??

Bump
 

Read other 2 answers
RELEVANCY SCORE 59.6

alright here's my problem...

I have my house networked via two linksys BEFW11S4 routers. The first is connected directly to my modem and four connections go to other rooms in my home. No biggie, no problems...

...until I needed 2 more ports in my office. SO i got my other router out, same model, and plugged the wall connection into the back, and then proceeded to plug in my computers into the three ports in the back. I can get no connection at all unless I plug my computer back into the wall then everything works like it should, so i'm guessing I have to do something in the router to set it up as a switch only, but I'm not sure how to do that. I've disabled DHCP, and some other things but I'm still in the dark.

Here's my setup-

Cable Modem > First Router >

First Router > Ports 1-3 to other rooms , Port 4 to my office...

Port 4 (from the port in my office wall) > Second Router >

Second Router > 3 computers that all need a connection to the internet

Any help at all would be wonderful as i have no friggin clue what to do here, linksys support is vague on the subject, and the customer service is clueless.
 

A:MODEM > ROUTER > ROUTER Problems?? Any suggestions?

seraphin said:



alright here's my problem...

I have my house networked via two linksys BEFW11S4 routers. The first is connected directly to my modem and four connections go to other rooms in my home. No biggie, no problems...

...until I needed 2 more ports in my office. SO i got my other router out, same model, and plugged the wall connection into the back, and then proceeded to plug in my computers into the three ports in the back. I can get no connection at all unless I plug my computer back into the wall then everything works like it should, so i'm guessing I have to do something in the router to set it up as a switch only, but I'm not sure how to do that. I've disabled DHCP, and some other things but I'm still in the dark.

Here's my setup-

Cable Modem > First Router >

First Router > Ports 1-3 to other rooms , Port 4 to my office...

Port 4 (from the port in my office wall) > Second Router >

Second Router > 3 computers that all need a connection to the internet

Any help at all would be wonderful as i have no friggin clue what to do here, linksys support is vague on the subject, and the customer service is clueless.Click to expand...

The 3 computers on the second router needed their DNS specified to be 192.168.1.1, and the second router setting itself set for DHCP instead of typical PPOE.

The above is the simplest, least complicated config.
 

Read other 2 answers
RELEVANCY SCORE 59.2

Hello...

I have the above mentioned router. My desktop is plugged into it & my wifes laptop has a wireless connection.

I constantly get the "Local Area Connection Unplugged" message on my desktop and for the life of me I cannot figure out why it's happening. We called D-Link Customer Support a million times and every time they give us a new fix, it still doesn't help.

The connection is sporadic and prevents me from doing a lot of things. Any ideas why this might be happening??

We both have Windows XP -- I have a cable modem. Anything else you need ot know to help I can provide.

Thanks.
AW
 

A:D-Link AirPlus Xtreme G Wireless Router -- Dropped Connection

D-Link AirPlus Xtreme G Wireless Router - Dropped Connection

This could be caused by many different things. The first thing I would do is try a new network cable. Fast and easy thing to try.

Does this happen only when your wife is connected?

Dennis
 

Read other 2 answers
RELEVANCY SCORE 59.2

I'm desperate here. OK here's my situation.

I am running Windows XP.
I live in the basement suite of a house, and my PC connects just fine to the wireless internet upstairs, BUT my XBOX and PS3 don't have a strong enough range to reach. Sometimes it does, but 90% of the time it doesnt.

My PC connects to the upstairs router using a D-Link Wireless USB card I got. Nothing fancy but it works.
Now, is there a way that I can use that connection, and share it so that I can plug my XBOX and PS3 into my own own D-Link router so they can leach the connection my PC is using from upstairs?

PLEASE help. I am out of ideas and I don't know how to figure this out.
 

A:How to use my D-Link router to leach the connection from wireless internet card!

Read other 14 answers
RELEVANCY SCORE 59.2

I have a Gateway desktop computer with Windows XP. I have internet service through Comcast and my connection is strong; however, I am unable to view any web pages. I have a wireless router (D-Link WBR1310) for a second computer in the house and was working on getting that computer up and running with a USB wireless and reset my wireless router and now neither computer has access to the internet. I have reviewed all of my settings and have gone to the wireless router set-up page and have reviewed those settings. Everything seems to be fine. Can somebody please assist me quickly?
 

A:D-Link Wireless Router WBR1310 internet connection issues

Read other 14 answers
RELEVANCY SCORE 59.2

Just purchased a Linksys WRT54G2 router so my wife can surf indepently in the house. The problem is that in trying to connect with the installation software I cannot find connection instructions. This is because 2 years ago when my daughter was home with her laptop computer we connected a very similar Linksys router. When I insert the CD-ROM to get instructions the software says "it appears you already have a router connected." and since this is the only way to make the connections I have to try and find the proper connection method here. The dsl modem is a Westell 6100.
 

A:Making connection from dsl modem to wireless router

Welcome to TSG, jayceeno.

Don't know how much help it will be, but here is Verizon's directions on hooking up a linksys router to the Westell 6100 DSL modem.

http://onlinehelp.verizon.net/consumer/bin/pdf/NetworkSteps/Case6445LinksysWestell6100.pdf
 

Read other 1 answers
RELEVANCY SCORE 59.2

I'm currently trying to have internet in a different place than my main one, i have the current modem plugged.

http://www.motorola.com/Business/US...nd/SURFboard+Modems+and+Gateways/SB6180_US-EN

http://www.arrisi.com/product_catalog/listers/index.asp?id=418

It seems both are plugged.

On the arris one i see those lights on.

[x] Power
[x] DS
[x] US
[x] Online
[ ] Link
[x] Telephone 1
[ ] Telephone 2
[x] Battery

On the Motorola one i got all the lights on.

I'm trying to put internet into a second room by wire.

I connected the wire from my second computer to the Arris modem in the yellow plug, and it still doesn't work.

Could i please get some help on how i could get multiple internet, i'm really having some trouble right now.

Thank you very much!
/Edit If it helps, i use Windows Vista.

If it's not possible to receive multiple internet with those, please tell me what i need!

PS: Sorry for my grammar, my natal language is french.
 

A:Modem / Router Internet multiple connection. Help!

Read other 9 answers