Over 1 million tech questions and answers.

Unable to connect to three monitors from Ultra Dock with ThinkPad T460s

Q: Unable to connect to three monitors from Ultra Dock with ThinkPad T460s

I have ThinkVision monitors connected via VGA and the display port. I have a 4k TV connected to the DVI on the back of the docking station. I am able to extend my desktop on the two ThinkVision monitors but I am not able to detect the TV to use for my third.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Unable to connect to three monitors from Ultra Dock with ThinkPad T460s

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 134.4

I have a Thinkpad W540 with a Lenovo Ultra Dock Docking Station (40A20170US). Here is the set up I am trying to get to work:Display 1) VGA Planar PL2010M monitorDisplay 2) DVI Planar PL1910M monitorDisplay 3) DisplayPort Lenovo L2251x Wide monitorDisplay 4) LCD monitor (off) When I have selected Standard Mode under the BIOS display settings, I am able to connect two monitors plus the internal LCD at the same time: one on VGA and the other on DVI, or I can connect one on VGA and the other on DisplayPort.  This allows me to have three displays, including the LCD.  My problem is that I am unable to get a third monitor to work as well.  When I connect a monitor via DisplayPort, the monitor on DVI stops working.  After reading forum posts and whatever else I found online, I learned (maybe I'm incorrect?) that I need to switch to Advanced Mode in the BIOS to be able to use three external monitors.   I then uninstalled drivers (the BIOS instructions state that you are supposed to uninstall graphics drivers before switching to Advanced Mode), switched to Advanced Mode in the BIOS, started up the computer, reinstalled the latest drivers, but now the only screen working is my laptop's LCD screen.  None of monitors are detected by Windows no matter what I try. When I switch back to Standard Mode in the BIOS, two of my external monitors begin working again. My docking station firmware is updated FYI.   Any suggestions ... Read more

A:Unable to connect to 3 monitors to Ultra Dock (Thinkpad W540) in Advanced Mode BIOS Setting

So I fixed the issue for myself and just wanted to post in case somebody else had the same issue.  I took the following steps to fix the issue:[Background: BIOS is in "Standard" display mode to begin with; I had already updated the docking station's firmware first with a program called fwdphb03.exe and then with Lenovo's update utility.]1) In Windows, I uninstall drivers for the Intel Graphics and K1100 dedicated card.2) Restart, go into BIOS, switch to "Advanced" mode under the Display tab.  I also have the option selected to start up on the docks in the BIOS Display tab.3) Booted into Windows (8.1) and it looked like the Intel Graphics drivers were automatically downloaded. I then ran Lenovo's System Update utility to get the latest video drivers.  Under the optional tab in the Lenovo update utility, I selected the "Optimus" drivers and hit download/install.  It installed, and I had to restart.4) Booted into Windows again, ran Lenovo update utility again, and again it had a video driver to install when I checked for updates.  I installed that, had to restart again.5) Booted into windows, checked screen resolution and saw that no external monitors were showing.6) I then decided to get a driver straight from the source.  Downloaded: the following file from  Nvidia: 334.95-quadro-notebook-win8-win7-64bit-international-whql.exe.  I ran the installation, it did a "Clean" installation with everything checked off. It automatically unins... Read more

Read other 5 answers
RELEVANCY SCORE 116.8

Hi, Everyone. Got me a nice little x270 to replace my old x201.  Happy enough with the machine, but getting it connected to my accessories (monitor, keyb, mouse, ethernet) is a bit of a chore. This machine appears to have a "proper" dock port on the bottom.  Is there a compatible ultradock available for the model 20HN x270?  By proper - I mean, Not USB.  A nice dock I can simply drop the machine into when I'm at the home office.. Thanks!

Read other answers
RELEVANCY SCORE 116.8

 Has a solution ever been provided for this.  Several models are doing this.  https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/Bitlocker-PIN-USB-C-Thunderbolt-dock/m-p...

Read other answers
RELEVANCY SCORE 116.8

I have read a lot and tried updating the firmware - nothing works.When I put the laptop in the docking station - it does not recognize the monitar and also says AC power is not connected when it is. Help appreciated!

Read other answers
RELEVANCY SCORE 109.6

I have a Lenovo T570 (Type 20JW, 20JX) Laptop (ThinkPad) and ThinkPad Basic Dock (40A00000WW).   I have a monitor plugged into the VGA connection on the docking station.  I have another monitor connected to my laptop with HDMI.  When the laptop is docked, the display will show on the laptop and the monitor connected to the dock.  The monitor connected via HDMI goes black.  When the laptop is off the dock, the HDMI monitor works.  Is there a way to get both monitors to work without having to buy a different docking station?  I know the ideal situation would be to get a different dock with 2 connections on it, but I was hoping not to have to pay for another dock.

Read other answers
RELEVANCY SCORE 104.8

Hey guys,I've got new P50s (running W10 x64) with Quadro M5000M, and Ultra docking station for it. I want to use 4 external monitors in any configuration, just that they all work. I tried updating BIOS and Docking station, installed latest Intel and Nvidia graphics driver, power management driver.. everything.I get 4 monitors displayed in Windows display settings, but as soon as I turn on the fourth, one of the others goes dark. Somewhere I read about BIOS setting for Hybrid graphic, but I don't have such setting in BIOS. Any help would be great Thanks!

Read other answers
RELEVANCY SCORE 104.8

Hi,  I am trying to connect three external monitors to my Ultra Dock (2 displayport, 1 hdmi). When I connect the 2nd displayport cable to the dock, the hdmi monitor shuts off. Is there any workaround? Apologies if this is a basic question. Thank you!

Read other answers
RELEVANCY SCORE 104.8

Hi.  I'm hoping I can get this resolved on this forum.I just got my system and am trying to connect my 3 external monitors.    My setup is as follows:Monitor 1 - laptop screen - works.Monitor 2 - HDMI out to HDMI in - worksMonitor 3 - DP out to HDMI in via a DP-HDMI cable.  - worksMonitor 4 - DP ou to DVI in via a DP-DVI adapter - doesn't work. I can't figure out how to make this work.I also tried this setup:Monitor 1 - laptop screen - works.Monitor 2 - VGA out to VGA in - worksMonitor 3 - HDMI out to HDMI in - worksMonitor 4 - DP out to HDMI in via a DP-HDMI cable.  - doesn't work. Incidentally in this configuration, when I closed the laptop screen this monitor worked.  Also on a related note, the Nvidia Quadro P500  is sitting idle as the Intel UHD 620 is doing all the work.  How can I control this? Thanks for any suggestions. Sal

A:Thinkpad P52S Ultra Dock and 3 External Monitors

As stayed in PSREF, P52s supports up to three independent displays. Laptop's screen includes in this limit, meaning you can use two external displays at that time. When you close the lid, you can use three external displays. To use more, you'll need some sort of USB adapter to increase such a limit. Regarding other question, you can't disable Intel GPU - it's always active and it's always controls screen output. NVIDIA's dGPU can be configured to be used in selected applications, making them to work with higher performance. P52 and P72 for sure have an ability to disable Intel iGPU, giving the control of screen output to dGPU. Probably P1 and/or X1 Extreme have the same feature too.





------...

Read other 1 answers
RELEVANCY SCORE 102.8

I have a brand new Lenovo ThinkPad L470 (win 10 pro) and a Lenovo Pro Dock. This configuration does not support two digital external monitors (don't get me started...) I want 2 digital external monitors.  Does anybody know if I will be able to support 2 external DisplayPort monitors if I purchase the Lenovo Ultra Dock?  thanks. 

Read other answers
RELEVANCY SCORE 98

I have a Thinkpad T430 type 23474W4 and a Thinkpad mini dock series 3 type 4338-15U. I already have a Lenovo LEN LS2223wC monitor hooked up to it through one of the DVI ports. I have a a Lenovo LT1952p Monitor that I would like to use as a second external monitor. Both monitors work individually through either DVI or VGA. However, I can't get them to both work at the same time no matter what configuration I use. I was told they didn't have to be identical monitors to work together. What am I doing wrong? 

Read other answers
RELEVANCY SCORE 94.8

I have a ThinkPad T460 OS Windows 7 and am trying to connect three monitors.  I have been running 2 moitors for sometime just fine, but I have the need to add a 3rd monitor.  I have a DisplayPort Plug converting to HDMI for the 3rd monitor, but still only two are active.  Can someone help me figure this out?

Read other answers
RELEVANCY SCORE 92.4

I have recently received an upgrade laptop at work. On my previous laptop (ThinkPad, unsure of model), I was able to connect one external display monitor directly to the VGA port on the laptop and an additional external diplay monitor to the ThinkPad Pro Dock station VGA port. I prefered to use these two screens with my laptop closed on the docking station, but could also open the laptop on the dock and have a third screen available. ISSUE: With my new ThinkPad (T440) there is no VGA port on the laptop. I have purchased a simple HDMI to VGA Converter Adapter - see link:https://www.amazon.ca/VicTsing-Gold-plated-Converter-Ultrabook-Devices-Black/dp/B016LVT51G/ref=sr_1_...   I am using the same ThinkPad Pro Dock station as with my previous laptop. With my new T440 I am able to work with my laptop open or closed on the docking station with one external display plugged into the docking station. I am also able to work with one external display plugged directly into my laptop using the VGA to HDMI converter adapter.  ISSUE 2: The laptop will not recognize when both screens are plugged in at the same time, but they each work when I have only one plugged in either to the dock or directly to the laptop. PLEASE HELP!! TIA

Read other answers
RELEVANCY SCORE 85.6

Have have about six instances now all are X1 Carbon 5th Gen using Thinkpad TBT 3 Dock. Laptops are not on recall list. In every instance when trying to connect to shares on these laptops get the following error from diagnostics. "The device or resource (computer name) is not set up to accept connections on port "The File and printer sharing (SMB)".  Contact your network administrator." All comptuer are Windows 10 Pro 64bit. All have the latest TBT 3 dock drivers from website. All aspects of SMB 1.0/CIFS File Sharing Support are installed. I have tried uninstalling and reinstalling the SMB 1.0/CIFS File Sharing Support. All other comptuers in the environment are not having this issue. I believe there is some issue with the Thinkpad TBT 3 Dock Ethernet. Anyone ran into this? If so did you find a fix?

Read other answers
RELEVANCY SCORE 85.6

I have a few thousand Ultra Dock scattered across NA. We are in the process of replacing all laptops attached to existing docking stations. Before we can send someone to replace the laptops,we need to know exactly how the monitors are connected to each existing computers/docking stations. The monitor connections maybe VGA, DVI, HDMI or DP, I need to determine how each monitor is connected to the computer/docking station. This is so that I can ensure that the correct cables and monitors are sent to each location. We are using a 3rd party software to determine how monitors are connected to computers/docking stations. They use details collected from Windows to detect the monitor connection type and it works perfectly on all computers and docking stations. However, what we have noticed is that on the Ultra Dock no matter what monitor connection type (VGA, DVI, HDMI, or DP) is used, the Ultra dock always shows that they are connected via DisplayPort (DP). My questions are:Is this a known issue with Ultra docks?Is there a way to have the Ultra dock show the true monitor connection type? If so how can this be done?

Read other answers
RELEVANCY SCORE 85.2

Hello, We have a problem with 2 laptops (ThinkPad X270) that "freeze" on the LENOVO logo when using Lenovo Ultra Dock with monitor Dell UZ2715H.Display Dell is plugged by Display port ports and one USB 3.0 (9 pin - used for display integrated webcam) connected to ThinkPad dock.When notebook turned ON with connected USB 3.0, computer freeze on LENOVO logo (To interrupt normal startup, press Enter) and work only when USB 3.0 disconected, or turned OFF and again Turned ON. Firmware on Dock is 2.33.000 Any suggestion? 

A:Lenovo ThinkPad Ultra (Pro) Dock + ThinkPad X270 (20K6) + Dell UZ2715H

I am just going to guess that computer is trying to boot via USB, so you might try changing the boot order in the BIOS so that Windows Boot Manager or the HD is first.  

Read other 1 answers
RELEVANCY SCORE 85.2

Wifi disabled and can't open to search on ThinkPad T470s after pulgging in ThinkPad Ultra Dock ThinkPad T470s 20HG

ThinkPad Ultra Dock - 90W USAfter unplugging from ultra dock, wifi will be connected... Does this dock support wifi?

Read other answers
RELEVANCY SCORE 84.8

Hi, I have Lenovo L470 and i would love to add extra monitors. Idea: Two DELL S2719DM (max resolution 2560x1440) monitors and connect this monitors using Ultra Dock. Cabels DisplayPort to HDMI (monitos support only HDMI input). Laptop: Lenovo L470i7-7500UIntel HD Graphixs 62024 GB RAMUbuntu 16.04LTS (latest updates) My questions: 1) Is this possible?3) Maybe i'm wrong with choosing correct Dock and maybe i need different one?2) Does enyone knows if Ubuntu supports Lenovo Dock?

Read other answers
RELEVANCY SCORE 84.4

Hi!I just got a new "X1 Carbon 5th Gen - Kabylake (Type 20HR, 20HQ)" and a "X1 Carbon Thunderbolt 3 Dock". I have an external screen connected to the dock and it works fine (VGA connection). I also have an other monitor with display (DP) connection that I want to use. But my computer can't find the other monitor, only the one with VGA connection. Is there any easy ways to fix this problem?Best regards

A:ThinkPad X1 Carbon 5th gen can't connect 2 external monitors in X1 Carbon Thunderbolt 3 Dock

[Posted moved and topic edited for discoverability.  AG]

Read other 1 answers
RELEVANCY SCORE 83.6

I have T570 and two same "thinkpad ultra dock" docking stations - one at the office and the other at home- with two monitors connected on each of them (DP & HDMI). At the office, I close the lid (2 screens) and at home I keep it opened (3-screen setup). A while ago it started flickering / blanking external monitors on *both* of them. Sometimes, when computer is left locked for some time (sleep is disabled!) external monitors are blanked and I can only revive them by removing + attaching the laptop to the dock again. I tried firmware updates on dock, driver updates on windows / lenovo... nothing helps. Windows 10, latest updates. I find it weird that two docks would go bad almost simultaneously. What else can I try - it is driving me crazy as I cannot work normally (sometimes it blinks like every minute or so but other times it is OK for more than an hour)?

Read other answers
RELEVANCY SCORE 83.6

I have a ThinkPad T580 with the Ultra Dock (40AJ0135US) and I'm wanting to use two external 4k monitors. I found this post (https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/How-many-DisplayPorts-are-available-on-t...) that seems to indicate that this cannot be done, but it doesn't make sense since the dock utilizes two USB-C connections from the T580. Can a DP and USB-C on the dock be used for two 4k monitors? Is there any combination of ports that would allow the dock to support two 4ks? Will Lenovo be releasing a monitor compatibility matrix soon for their new laptop lineup, like this one: https://support.lenovo.com/ca/en/solutions/pd029622#USB-C%20dock ? I appreciate any help!

Read other answers
RELEVANCY SCORE 83.6

Dear Community, my employer will soon change my equipment from a stationary PC to a ThinkPad T450s with Ultra Dock 90 W. I would like to know whether it is possible to connect my current three monitor setup to the new system. My monitors are:1x UHD (3960x2160)2x FHD (1920x1080) All monitors must run at 60 HZ. The maximum resolution/refresh rate table for the Dock can be found here and shows that it is not possible via the Dock outputs as I understand. But is there another way? Perhaps by using the ThinkPads own video output and two of the Docks outputs? Or any othder idea? I would buy another docking station or other equipment to connect my monitors if that was a solution. Thank you very much for your support!  

Read other answers
RELEVANCY SCORE 82.8

Hello,I have Lenovo X1 Carbon 6gen with i7-8550U docked in the Lenovo Ultra Dock and I just bought three Lenovo P27h lcds. Those LCDs are connected via two displayport connectors. In one displayport connector is one lcd, in second is two lcds in daisy chain configuration. All lcds works but the problem is that on the one is highest availaible resulotion just 1920x1200 or 1920x1080. It is not the problem of lcd or the daisy chain because when I disconnet one lcd I get the proper resolution on it also (2560x1440). According to intel specs it should not be problem of graphics card which should be powerfull enought to handle it. Have anyone have similar issue? Do anyone have an idea how to solve it? Thank you. Ondrej.

Read other answers
RELEVANCY SCORE 82.8

Hi there,I've got a new T470 and Ultra Dock and try to connect my 2 external monitors via DisplayPort but nothing happens.I tried to update the firmware of the Ultra Dock but it won't work because I got the following error message in den update.log: "Error description: Can't connect to Synaptics VMMxxxx DP hub IC"The 2 monitors were still connected to the Ultra Dock. So I connected one of those monitors vie HDMI and installed the Firmware again. Now I got the current version 2.33.000 installed. But as soon as I remove the HDMI cable nothing happens again. What else can I do? Do I have an issue with my Ultra Dock?

Read other answers
RELEVANCY SCORE 82

Hallo, ich habe seit einiger Zeit das Problem, dass der externe Monitor, der per DP an den Pro Dock und zum T460s angeschlossen ist, sporadische Aussetzer hat. Der Monitor meldet dann "Kein Signal", der Monitor des Notebooks "bleibt da".Ich habe nach Recherche gelesen, dass solch ein Problem bekannt ist und an der Firmware der Docking-Station liegt.Die FW ist aber mit V 2.33.000 anscheinend am aktuellsten Stand.Das Aussetzen ist nicht reproduzierbar und tritt unterschiedlich oft auf. Auch die Dauer, wie lange der Monitor schwarz bleibt ist unterschiedlich.Win10 Pro, i7-6600U, 4k Monitor über DisplayPort (am Dock), Netzteil (auch schon gelesen): 90W, 20V (Rev: D, Rev: 400).Gibt es dazu Lösungen? Ziemlich nervig, wenn währen der Arbeit plötzlich der Monitor öfter "verschwindet".  I´m sorry! I don´t know why but language was automatically changed to English! T460s on ThinkPad Pro Dock, external monitor (4k) connected via display port to dock.Sometimes the external monitor got black and reports "no signal". This happens sporadically, I am not able to reconstruct this. I´ve red, that an old firmware of the Pro Dock can cause this error, but the Verison 2.33.000 seems to be the newest. I also checked the AC-supply (I´ve red, that a wrong supply can cause this "blackout", this is the 90W / 20V supply which should be okay).Win10 Pro, i7-6600U, 4k monitor via DisplayPort (connected to ProDock), AC-supply: 90W, 20V (Rev: D, Rev: 400)Any suggestions?Thank yo... Read more

Read other answers
RELEVANCY SCORE 82

Hello, I recently at work got the possibilty to recieve a thunderbolt 3 docking station. But as you may know there is no port for thunderbolt on a T460S. My question is, is it possible to make it work through some sort of adapter? Thank you in advance!

Read other answers
RELEVANCY SCORE 82

Hallo, ich habe seit einiger Zeit das Problem, dass der externe Monitor, der per DP an den Pro Dock und zum T460s angeschlossen ist, sporadische Aussetzer hat. Der Monitor meldet dann "Kein Signal", der Monitor des Notebooks "bleibt da".Ich habe nach Recherche gelesen, dass solch ein Problem bekannt ist und an der Firmware der Docking-Station liegt.Die FW ist aber mit V 2.33.000 anscheinend am aktuellsten Stand.Das Aussetzen ist nicht reproduzierbar und tritt unterschiedlich oft auf. Auch die Dauer, wie lange der Monitor schwarz bleibt ist unterschiedlich.Win10 Pro, i7-6600U, 4k Monitor über DisplayPort (am Dock), Netzteil (auch schon gelesen): 90W, 20V (Rev: D, Rev: 400).Gibt es dazu Lösungen? Ziemlich nervig, wenn währen der Arbeit plötzlich der Monitor öfter "verschwindet".  I´m sorry! I don´t know why but language was automatically changed to English! T460s on ThinkPad Pro Dock, external monitor (4k) connected via display port to dock.Sometimes the external monitor got black and reports "no signal". This happens sporadically, I am not able to reconstruct this. I´ve red, that an old firmware of the Pro Dock can cause this error, but the Verison 2.33.000 seems to be the newest. I also checked the AC-supply (I´ve red, that a wrong supply can cause this "blackout", this is the 90W / 20V supply which should be okay).Win10 Pro, i7-6600U, 4k monitor via DisplayPort (connected to ProDock), AC-supply: 90W, 20V (Rev: D, Rev: 400)Any suggestions?Thank yo... Read more

Read other answers
RELEVANCY SCORE 81.2

Hi, I am looking for some help, I have a T450 that has been working away on a Thinkpad Ultra Dock with no issues, then all of a sudden it will not charge while docked!! Take it out of the dock and charge directly and it works fine, I tried replacing with a new docking station the exact model but again it does not charge the laptop while in the dock, I have switched out the battery and it is still the same. I have fully updated the BIOS etc and still have the same issue, I tried updating the Ultra Dock firmware but run into issues as the firmware update will only run while docked and also has power, but as the laptop is not detecting power I cannot proceed , I tried updating out of the dock but it does not proceed either as it cannot detect the docking station. Everything else works via the docking station HDMI, USB, DVI, Ethernet  all working perfect, has anyone came accross this issue?

Read other answers
RELEVANCY SCORE 81.2

Checking to see if anyone has had this issue. We have 5 T570 20JW, running the most current verison of Windows 10Pro and since Yesterday (9/18/17), whenever a user undocks their laptop and then redocks it the external monitors do not turn back on and Windows does not recognize the 2 displays either. The only way we have been able to get them to show back up is to either reseat one or both of the monitor cables from the dock or put the laptop into sleep mode and then wake it backup using the docking station power button. It's not the displaying drivers causing the issue, at least not directly as we have tried the most current and the last release and neither fix the issue and as I stated this just started on 9/18 and the most current drivers are a few months old now. My only guess is that it's one of the 5 lenovo updates that where installed yesterday or the latest bios update (See the attached picture). I haven't had the chance yet to uninstall each of the 5 updates because I will need to go download the last version of each of them first, but wanted to see if any one else has had this happen and to forwarn anyone that has one to be careful with the most current updates. Thanks, Joseph


























2017-09-18_18-06-09.jpg ?169 KB

Read other answers
RELEVANCY SCORE 81.2

I'm trying (and failing) at driving four 1920x1080 monitors vai two DP 1.2 daisy chains. Three monitors show up as available. The fourth does not. Is this not possible? If I'm using both DP ports can I also use one of the HDMI or DVI ports to drive the fourth monitor instead of daisy chaining it? Setup: W550s (Model 20E2CTO1WW)ThinkPad 90W Ultra Dock One DP cable to a Dell U2414H-- then daisy changed to a Dell U2412M One DP cable to a another Dell U2414H-- also daisy chained to another Dell U2412M Both U2414H monitors have DP 1.2 enabled. Thanks,Sam 

Read other answers
RELEVANCY SCORE 80.4

When connected to the Thinkpad DisplayLink, the driver shuts off useability of the Jack sound ports (on both the computer and the display link). Earlier I could not initiate the driver installation of my USB-ports, and thus could not use the rest of my computers' USB ports -- The Display Links' Ports work. This issue was solved when connencting to the port while the DisplayLink was disconnected.I was connecting a Samsung phone System & Device Firmware/ USB Composite Devices: 10.0.16299.15 peripheral Jack Driver vers. 10.0.16299.15DisplayLink driver vers. 8.3.1905.0USB Root Hub, USB Hub Drivers SuperSpeed and not: 10.0.16299.334USCI USB Connector Manager: 10.0.16299.251eXtensible Host Controller 3.0 10.0.16299.431SAMSUNG Mobile USB Composite: 2.12.5.0Phone Driver: Samsung Galaxy S7: 2.9.317.215Realtek Driver: 6.0.1.8224DisplayLink//Lenovo Audio: 8.3.1888.0 most of rest of drivers are firmware vers.: 10.0.16299.15my processor driver vers is 10.0.16299.371

Read other answers
RELEVANCY SCORE 80.4

I'm trying to find a replacement cord for an Ultra Dock that works with a T450s Thinkpad.  Can someone look at theirs and let me know what I need to order?  Suggestions as to where to order also appreciated. 

Read other answers
RELEVANCY SCORE 80.4

Hi,  I have Lenovo ThinkPad L540 and Basic Dock and I want to upgrade dock to Ultra Dock 90W 40A2. I have question about external displays. My setup is 3 monitors Benq GL2250. Right now there are two monitors connected mini-DP on Laptop and VGA in Basic Dock, third one is inactive right now. Could I connect all three monitors to Ultra Dock and have working laptop display simultaneously. I just want to be sure about this solution working and which ports could be used to connect monitors Thanks in advance

Read other answers
RELEVANCY SCORE 80.4

I have a W541 and it always worked well with the dock and dual external monitors, that is until the firmware was updated by Lenovo System Update to the Latest Version: 2.33.000 about a week ago. Now when you boot the laptop in the dock, the post shows on the two external monitors then they go black and seem to disconnect as the power saving icon shows on both monitors. If you undock the laptop at this point and immediately re-dock, the two monitors light up and no more issues. While this isnt a huge issue, it is very annoying since it always worked properly before the update. Any suggestions on a possible fix are much appreciated. Thanks in advance.

Read other answers
RELEVANCY SCORE 80.4

Hello, is it possible to update the Lenovo Ultra Dock Pro to the latest version without a Windows Operating System? https://support.lenovo.com/de/en/documents/ht081248 A bootable ISO for this would be perfect. I use Linux as Operating System installed on a T440p, so a Windows based update is not possible for me. Thanks in advance! Best regrads, Michael

Read other answers
RELEVANCY SCORE 80.4

Trying to figure out how to charge my Yoga 3, while using my new Thinkpad Ultra docking station. The power USB for the Yoga 3 and docking station USB only work in the Yoga 3 power port. None of the other USB ports on the Yoga 3 will work. Do I need an adapter? 

Read other answers
RELEVANCY SCORE 80.4

Hi,  I'm using a Lenovo P51 with M2200 graphic card and have a docking station 40A2. I wish to connect the two monitors to my docking station, one is VGA cable and another one is HDMI. When I dock my P51 to the docking station, the monitors could not be detected. I tried to configured my bios setting to discrete graphic setting but nothing changed. Try to put shared on dock display also but nothing works.  When I connected one of the monitor HDMI cable to the laptop directly without going through the docking station, it works perfectly but I could not connect the VGA cable monitor to the laptop without a converter and it defeat the purpose of having a docking station.  Anyone encounter this problem and has a solution for this problem? 

Read other answers
RELEVANCY SCORE 80.4

I am running 2 monitors (Dell U2414H @ 1920 x 1080 60Hz) on my ThinkPad USB 3.0 Ultra Dock.  I also have my Yoga 900 monitor on and the desktop is extended to all monitors.  I have a regular issue where the Displayport monitor turns off for 1-3 seconds then comes back on for no apparent reason.  I have searched the internet and the only similar issue I have found suggestes the dock is under powered to run 2 monitors however that does not seem consistent with what other people are doing.  There is no particular application that causes the issue. Can anyone help?  It's very frustrating waiting for the monitors to come back on. 

Read other answers
RELEVANCY SCORE 80.4

My company has issue me a Lenovo T470s and an Ultra Dock to replace my existing equipment. I have two external monitors connected to the docking station with display port cables. The problem that I am experiencing is that if the laptop is docked and the cover is open, I get video on the laptop display and one external monitor. The other external monitor gets no signal and goes to sleep. If I close the laptop cover, I get video on both external monitors. A co-worker told me that this was working as designed and that the solution for getting video on all three monitors was to connect one external monitor to one of the display ports and the other to the DVI port. (He hadn't tested this configuration and is using two display ports with the laptop cover closed.) I tried my coworker's suggestion and got the same result but prior to switching to DVI, I downloaded and installed the latest(?) driver for the HD Graphics 620 adapter from this website (lenovo.com) and that seemed to solve the problem (when using two display ports) but after shutting the laptop down, I had the same issue the next day. What I want, is to have the laptop cover open and still be able to use two external monitors and get optimal resolution on all three monitors. What's the best configuration for achieving this? (Don't guess, like my co-worker. Give me something you've tested and that you can confirm that it works.)

Read other answers
RELEVANCY SCORE 80.4

I am trying to connect two Sceptre U27 4k monitors via display port to the Thinkpad Ultra Dock 40A2 and i'm not having any luck. With a Thinkpad T470s) I can get 1 working but the other monitor just doesn't see a signal. The only setup i've gotten to work is one monitor at 4k @ 30hz on a Display Port and the other at 1920x1080 via DVI I have tried:both display port, 4k @ 30hz (<--- what i'd like to get working since both at 60hz isn't an option with this dock I don't believe)one display port, 4k @ 30hz, one hdmi 4k @ 30hz (via hdmi on the back of the dock)one display port, 4k @ 30hz, one hdmi via hdmi port on the side of the laptop Is anyone familiar with what magic combination of cables and ports would allow me to run both 4k monitors at 30hz, via the two display ports at the back of this dock? I would think updating the docks firmware may help ( https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/ThinkPad-Pro-Dock-ThinkPad-Ultra-Dock-or-Thin... ) but there inlies another issue.  Our corporate image on these laptops is RHEL 7.5 and I do not see an option to flash any firmware available from linux unfortunately. Any help would be greatly appreciated. 

A:T470s and Ultra Dock 40a2 dual 4k display port monitors not functioning

I'm thinking my best bet may be to use a Display Port to USB-C/Thunderbolt 3 cable for one monitor and the docking stations display port for the other.

Read other 1 answers
RELEVANCY SCORE 80.4

I am trying to connect two Sceptre U27 4k monitors via display port to the Thinkpad Ultra Dock 40A2 and i'm not having any luck. With a Thinkpad x470s) I can get 1 working but the other monitor just doesn't see a signal. The only setup i've gotten to work is one monitor at 4k @ 30hz on a Display Port and the other at 1920x1080 via DVI I have tried:both display port, 4k @ 30hz (<--- what i'd like to get working since both at 60hz isn't an option with this dock I don't believe)one display port, 4k @ 30hz, one hdmi 4k @ 30hz (via hdmi on the back of the dock)one display port, 4k @ 30hz, one hdmi via hdmi port on the side of the laptop Is anyone familiar with what magic combination of cables and ports would allow me to run both 4k monitors at 30hz, via the two display ports at the back of this dock? I would think updating the docks firmware may help ( https://forums.lenovo.com/t5/ThinkPad-X-Series-Laptops/ThinkPad-Pro-Dock-ThinkPad-Ultra-Dock-or-Thin... ) but there inlies another issue.  Our corporate image on these laptops is RHEL 7.5 and I do not see an option to flash any firmware available from linux unfortunately. Any help would be greatly appreciated. 

Read other answers
RELEVANCY SCORE 79.6

Hello everyone,that's my question:I put the notebook on the docking stationg (lid shut). I push the docking's power button and the notebook turns on (obviously everything's working fine).The only thing is that the led of the docking is totally off, while I guess it should be green as the notebook power button is.Is the power button supposed to be green or this is the normal behaviour?The notebook firmware is the latest one (BIOS LENOVO N1KET19W (1.06 ), 10/03/2016).ThanksGiovanni

Read other answers
RELEVANCY SCORE 79.6

Yesterday, I updated my T450s and, among other updates,I updated the Ultra Dock 90W firmare to version 2.29.00.  Afterward, when the laptop is docked, with the cover shut, and I try to power up the unit, it won't do so.  When I open the laptop in the dock, the power indicator is green and there is a green light on the function key.  No matter what I try, the machine won't power up after this.  If I force it to shut down and then try to power it up open instead, it powers up normally and both the laptop screen and the attached monitor work and, if I close the cover after, the attached monitor still works.  Obviously, I can use the machine docked with this work around, but I can't figure out why it won't work when I try to poweer it up closed.  I subsequently updated to version 2.30.00 and the behavior continues. What am I missing here? 

Read other answers
RELEVANCY SCORE 79.6

Hi there, when I undock my X280 from the Ultra dock (notebook closed but running) and open the lid the device will not respond to keyboard or trackpoint input.I need to close the lid again which triggers entering 'energy saving' mode.Then opening the lid again will resume everything to normal. I can reproduce this every time on two identical Docks. Funny thing is, my wifes identical X280 does not show this behaviour but works fine. Any idea what I could try to solve this small (but a bit annoying issue)?Thanks.Q.    

Read other answers