Over 1 million tech questions and answers.

Realtek HD Audio Error Code 45

Q: Realtek HD Audio Error Code 45

I'm running windows 10 on an HP Omen and after most recent windows update, my computers internal speakers are unavailable, as are any wired connected audio devices. Sound icon says no speakers or headphones are plugged in. Device manager, under sound, video, and game controllers does not show realtek HD audio. This only appears when I go to view and select show hidden devices. Then, under properties, I can see Code 45 (hardware device not connected. To fix, reconnect). I have attempted driver fixes including driver version 6.0.1.8591. Troubleshooters for audio detected nothing. I have tried rolling back the windows update.

I cannot find any sites that recommend steps beyond checking driver for the device. I've also tried calling HP tech support twice, and both times representatives told me they needed more time to find a solution (which they have failed to do).

Anyone who has dealt with this issue or has thoughts, any advice appreciated.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Realtek HD Audio Error Code 45

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 78.4

Hey guys! This is my first post and I hope I can get some help!
A few days ago, I set up my desktop and installed a fresh copy of Windows XP Pro. Of course, I had to get all my drivers manually, and I did. Everything was all fine and dandy until I realised that I had no sound. so searching I went until I found the driver I needed: Realtek AC'97 Audio. So I restarted and figured I would have sound. That was not the case. So I went into Device Manager and found a black exclaimation mark in a yellow bubble on my sound driver. I right-clicked it and went to "Properties". In the text box it said: "This device cannot start. (Code 10)"! I cannot seem to fix this issue! I went to RealTek and downloaded them. I went to Asus but could not find the drivers for my model (I am not 100% certain but I think I have a Pundit-S)

System Specs:

Mainboard : Asus P4R8L
Chipset : ATI 9100 IGP
Processor : Intel Pentium 4 @ 3200MHz
Physical Memory : 2048MB (2 x 1024 DDR-SDRAM )
Video Card : RADEON 9100 IGP
Hard Disk : Seagate ST380811AS (80GB)
DVD-Rom Drive : ATAPI DVD D DH16D2P
Monitor Type : ProView Technology - 17 inches
Network Card : 3COM 3C920B-EMB-WNM Integrated Fast Ethernet Controller
Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 3 (32-bit)
DirectX : Version 10.00
Device Audio : ASUSTeK Computer IXP150 AC'97 Audio Controller

If this isn't enough info, please tell me so I can add to it. If anyone can help it will be DEEPLY ap... Read more

A:Solved: RealTek AC'97 Audio Error Code 10!

Read other 9 answers
RELEVANCY SCORE 77.6

Hi peeps.

First time posting, so if im not doing it right i apologise.

I recently formated my pc, and re-installed windows XP pro.. installed all my drivers ect & everything was working perfect even my sound.. the next day when i switched the pc my audio device has a code 10 error?

How does that work? i dont have a virus as i did scans, i tried uninstalling and re-installing all different audio drivers even older versions, just doesnt seem to work...
Im getting sleepless nights with this nonsense .. damn digital signatures

My pc specs:
AMD 3000+
motherboard 7njl3/4
geforce 6200a
1 gig ram
120 gig hardrive.

PLEASE HELP ME.. it is so damn annoying..

thanks in advance.
 

A:Realtek ac'97 audio drive not working, error code 10

No sound?

Try the simple things first. Speakers on and working? Plug them into a MP3 player, test that they actually amplify. Speaker plug in the correct socket in the PC? ( I mean not the Mic socket?) Have you looked in 'Device Manager' for a yellow warning by the entry for your sound option? Assume you know all the above, it's most likely still to be the wrong drivers. Go into 'Device Manager' and uninstall any sound drivers. Then go to www.drivereasy.com and download their free program, scan your PC and you will get the right driver I would think. You might also find a few other drivers out of date too. And NO it doesn't cost you to use that program. Hope this helps.
 

Read other 35 answers
RELEVANCY SCORE 77.6

Hello,

I don't know what's wrong with this.I have no sound for anything. and even when I try to stream videos in the internet, the video automatically pauses for about every 12 seconds.

I don't know what to do but I think you guys can help me.
I also have a Realtek AC'97 audio for VIA(R) audio controller. I'm running Windows XP Service Pack 3. My motherboard is VIA VT8237R plus.

I'm having the same problem:
Device cannot start( code 10)

I also tried to install that vinyl_v700b
but every time the installation starts, my conputer tends to restart. That's why I can't install that one.
what's wrong? Can you guys please tell me what to do?
thnx. I cant really watch videos nor play music files.

Thanks again.
 

A:Realtek AC'97 audio controller not working -- error (code 10)

Apart from the audio driver, it is critical to have the right chipset driver installed. The VIA southbridge needs to work properly to interface with the vinyl audio processor.
So try installing the chipset driver first, and then the audio driver. And of course make sure all MS updates are installed, including the MS UAA driver.
 

Read other 1 answers
RELEVANCY SCORE 76.8

I bought a laptop from a friend and it has no sound. When I tried to find the source of the problem an error message pops up which I am sure is the root of my problem. It is Realtek AC97 audio driver error code 10. Make: emachines xp, Model number: m622-uk8x. Can someone please assist me with this issue, I would really appreciate it. Thanks in advance.
 

A:Solved: Realtek ac97 audio driver error code 10

Read other 16 answers
RELEVANCY SCORE 76.8

Hope someone can help me out with my audio problems...

I have an ASUS A54C laptop less than a month old.
-Windows 7, service pack 1.
64 bit.

About a week ago Asus live update automatically installed some updates (I didn't realise I could disable auto update, still getting used to this laptop)
when it restarted a few errors kept popping up and the webcam was not working. After googling I came across forum posts saying you have to manually download the drivers from the website. After doing that the webcam software showed a message "no audio device found" I thought ok, no problem I'll just re-install the audio driver (I had done this a few weeks previously because the built in mic was acting up).

The first half of installation completed, laptop restarted but then gave me the following error when trying to complete the second half:

Install Realtek HD Audio Driver Failure !!
[Error Code: 0x00000002]

Things I've already tried:
-I have tried several times to install the audio driver
-Tried installing different versions
- downloading directly from realtek
-System restore a couple times but it failed.
-Updated the BIOS (although I have no idea what this actually does)

I don't know what else to do.
Please help!
 

A:Solved: Realtek HD audio won't install [Error Code: 0x00000002]

Read other 8 answers
RELEVANCY SCORE 76

I can't install my audio driver after upgrading to Windows 7 Ultimate x64! I run a Lenovo Y550, my drivers can be found here. When it starts installing, an error pops up and says:Install Realtek HD Audio Driver Failure !![Error Code : -0001] Any help will be real apreciated.

A:Install Realtek HD Audio Driver Failure !! [Error Code : -0001]

try "run as admin"any error code like 0x000005g4?

Read other 9 answers
RELEVANCY SCORE 71.2

Basicaly the title explain it all,can find the driver for on board audio device.
I just buy a second hand MBO.It is MSI Neo 4 H,MS-7125 Ver:3,Bios ver. V5.3 072106
Newly instaled Windovs 7 Ultima 64bits.
Trayed few diferent drivers non of them works,so probably is audio device gone.
Any sugestions?

Read other answers
RELEVANCY SCORE 69.6

Hi,

I have several computers of differents (HP, Toshiba, etc) and It happens the same problem. The audio device has an exclamation mark in Device Manager.

I think this problem is caused by some update windows. My OS is Windows 7 Home Premium 32bits .

Does anyone know what Windows Update should be uninstalled ?

Thank You.

Read other answers
RELEVANCY SCORE 67.2

Hello,

I have no sound coming from my speakers and when I look at the device manager the "Realtek High Definition Audio" has a yellow icon with an exclamation point. When I right click and click properties it says, "This device cannot start. (Code 10)".

I have uninstalled and reinstalled the drivers several times and have even done a fresh install of Windows 7, but no luck.

Any help is much appreciated.

Thanks in advance.

Under my sound card driver hardware ID it is listed as:

HDAUDIO\FUNC_01&VEN_10EC&DEV_0887&SUBSYS_1043837B&REV_1002
HDAUDIO\FUNC_01&VEN_10EC&DEV_0887&SUBSYS_1043837B

Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
System Manufacturer: ASUSTeK Computer INC.
System Model: CM5570
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz (2 CPUs), ~2.6GHz
Memory: 6144MB RAM
Available OS Memory: 6144MB RAM

A:Realtek HD Audio (Code 10)

What do you show in the Device Manager, Sound section?
Post a Screenshot of that.

Code 10 can be driver or can be some other hardware issue.
In the Device Manager, RIGHT click on the entry for the RealTek and then LEFT click "Uninstall" ALSO check the box to uninstall the drivers. Then restart the PC. If there are no hardware problems or conflicts, when Windows starts it will detect and and install the generic, basic function, "High Definition Audio Codec" for the sound driver. If this is installed, check to see if you have sound, and if the Speakers (High Definiton Audio Codec) is set as the default Audio playback device in the Control Panel/Hardware and Sound, Playback section.

If this works, you can consider reinstalling the RealTek drivers. Where did you get the drivers you have now?

Screenshots and Files - Upload and Post in Seven Forums

Read other 6 answers
RELEVANCY SCORE 67.2

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39).

So as you can see above, i have tryed everything to fix this. I get this message or the computer crashs and i have to do a system restore.

If you have any ideas i didnt think of let me know.

A:Realtek AC'97 Audio (Code 39)

Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)

Microsoft Trusted Audio Drivers

Read other 9 answers
RELEVANCY SCORE 67.2

I have a HP Pavilion zv6000
amd 64 3200 +

I used the Realtek AC'97 Audio driver when I had x64 vista business and the sound worked fine.

I used the same driver with W7 and I get and error that says This device cannot start. (Code 10)

Has anyone had luck fixing this issue or had the same problem.

A:Realtek AC'97 Audio (Code 10)

i had a problem with my ac'97, not sure if that was the error code, but it was saying i had no audio installed, have you tried the lastest version from the website? i am running 6.01.6293 (16/09/2008) and after installing this version it was OK








  
Quote: Originally Posted by billdobeans


I have a HP Pavilion zv6000
amd 64 3200 +

I used the Realtek AC'97 Audio driver when I had x64 vista business and the sound worked fine.

I used the same driver with W7 and I get and error that says This device cannot start. (Code 10)

Has anyone had luck fixing this issue or had the same problem.

Read other 9 answers
RELEVANCY SCORE 66.4

So, I've reinstalled my system back to XP, and installed all of the devices but it shows that there's no sound card. It shows the "code 10" problem. I've tried to reinstall the driver, and installed different updated version,but still no luck. I have attached my dxdiag, so if anyone call tell me where's my problem
 

Read other answers
RELEVANCY SCORE 66.4

Hello everyone,

Havent been here in a while so sorry if im doing something wrong, well my problem is with a Toshiba Satellite L505D-LS5005 after having an issue with freezing at start up I ran several antivirus and spyware scans and all came up negative but the freezing continued so I then was able to go into safe mode and do an MSconfig and unchecked everything booting up. That took care of the problem with the freezing and I was able to uninstall Norton and McAfee which I believe was the problem. (enabled one by one to identify the problem so far everything is playing nice no conflicts)

Soon after getting things back to normal I noticed that the audio drivers weren't working. This computer has the "High Definition Audio drivers" but it has "This device cannot start. (Code 10)" status on the drivers. I have tried the following solutions with out results:

Uninstalled drivers from the device manager and reinstalled them using the drivers from the Official Toshiba Website. After installing I restart but still no audio and the same "This device cannot start. (Code 10)" message on the status

I have also tried uninstalling all Realtek drivers such as Ethernet controller and Wireless device controller and done one by one. All other devices install and work after installation except the audio drivers.

I have also gone to Add or remove programs and uninstalled the Realtek audio drivers and reinstalled the drivers from realtek.com and still ... Read more

A:Realtek audio drivers code 10

Hi just to start of code 10 is when the wrong driver is installed so you do need to get the right driver .. toshiba is the most unreal difficult company to get drivers from they have a few sites .. not sure y but maybe someone with more experience can help there . you do need to get them from the site tho I will go and try find one for you aswell,, also not 100% sure but im quite sure you should really run 64bit on 2gig of ram that could be another problem ARE YOU IN UK OR USA
 

Read other 14 answers
RELEVANCY SCORE 65.6

Hello,

I've searched this forum, and others, and haven't found a solution for this problem.

I have no sound for anything. I have a Realtek AC'97 audio, running Windows Service Pack 3. My motherboard is an intel corporation one. My laptop is a sony vaio pcg-z1wamp.

In the Device Manager it shows the following: "Device cannot start (code 10)".

I've tried installing several new drivers; I've uninstalled and installed the device; I've tried updates and some of the solutions suggested on this forum. Nothing has worked.
Hardware issue & problem persists.


Any help would be greatly appreciated.
 

A:Realtek AC'97 audio controller, can't start (code 10)

I ran everest, see below
Motherboard:
CPU Type Mobile Intel Pentium M, 1687 MHz (17 x 99)
Motherboard Name Sony Corporation PCG-Z1WAMP(UC)
Motherboard Chipset Intel Odem i855PM
System Memory 1024 MB (PC2700 DDR SDRAM)
BIOS Type Phoenix (11/21/03)

Display:
Video Adapter MOBILITY RADEON (16 MB)
Video Adapter MOBILITY RADEON (16 MB)
3D Accelerator ATI Mobility Radeon (M6)
Monitor Plug and Play Monitor (12001)

Multimedia:
Audio Adapter Intel 82801DBM ICH4-M - AC'97 Audio Controller [B-1]
 

Read other 14 answers
RELEVANCY SCORE 65.6

I've seen this issue resolved on here before, and it all seems to balance on a code that is different on all computers. I accidentally uninstalled something when I clicked on the wrong line. I hit cancel as soon as I saw what I did but it was too late. I have no sound on my old POS computer Help tech support guy. Help!

I'll even send cookies to whomever helps!
 

A:RealTek AC'97 Audio: This device cannot start. (Code 10)

Read other 10 answers
RELEVANCY SCORE 65.6

Hey hello everyone, I am new member here. I already checked couple threads with this same title, but I didn't really find any solution.

Here's a thing. Yesterday I went to clean my computer for dust, so I opened case and unplugged all wires. Now everything is backup except there is no sound. In device manager I got that yellow/black '!' next to Realtek AC3'97 Audio. I reinstalled drivers couple times already, but nothing. I mean, I was just cleaning dust...

So I came up with that idea that it might be the problem with the front panel pins, which I probably connected in wrong ways. I don't even know in which way those pins should be facing when connecting. So the motherboard is Asus A8N5X (from 2005, yea old), computer runs on Windows XP SP3. I tried many combinations with those pins, but nothing. I get that yellow/black '!' next to device or I get nothing at all (it won't show the device at all).

I tried reading the manual, but the wire names are different on the actual wires than shown in the manual:

And the names on wires are:

GND (black wire)
GND (black wire)
Mic Bias (yellow)
Mic In (green)
Spkout L (red)
Spkout L (red)
Spkout R (white)
Spkout R (white)

As you can see names duplicates. So I tried various combinations, but nothing. Once looked like I fixed it, after loading Windows up, there was sound icon in the tray, but PC suddenly restarted and next time there was no audio again.

Like I said I unplugged all wires befo... Read more

A:RealTek AC'97 Audio: This device cannot start. (Code 10)

Read other 6 answers
RELEVANCY SCORE 64.8

Hello,

Recently, I installed this Windows XP Professional SP2 on my comp. Once done, I am not been able to install my audio drivers for Realtek High Definition Audio. I couldn't understand what the problem is. Before, they were working fine, now since I had re-installed the Windows again, the whole thing came into being. I had done reinstalling the Windows several times now.

The drivers for the device are installed. But it says the device cannot start.[Code 10].

I had done loads of things, such as :

1. Reinstalling the drivers after uninstalling the same.
2. Rebooting as appropriate.
3. Surf through different sites to check, what best I can do, to tackle the whole thing. But nothing so far.


Hopefully someone be able to tell me, what to do.....

I need my sound back, as my work is completely hung up without it.....

Thankx......

Read other answers
RELEVANCY SCORE 64.8

HP Pavillion zx5000
Intel Pentium 4
3.20 GHz
1 GB RAM
Windows XP Home Edition SP 3

My friend's laptop is having trouble recognizing its sound driver (Realtek AC97). The hard drive was replaced and the operating system reinstalled a couple months ago, and ever since then it hasn't been able to play sound. Under the Device Manager, Realtek AC'97 Audio has a yellow exclamation point next to it, and under its Device Status it reads "This device cannot start. (Code 10)".

I've tried uninstalling and reinstalling the device, as well as downloading the most recent driver (the most recent I could find was 4.04), but to no avail. I'm not sure what else I can do at this point.

On other boards that I've looked at people have asked what motherboard was being used. I used Everest to find the following information under "Motherboard":

Motherboard:
CPU Type Intel Pentium 4, 3200 MHz (16 x 200)
Motherboard Name Hewlett-Packard Pavilion zx5000 (DZ313U#ABA)
Motherboard Chipset ATI Radeon 9100 IGP
System Memory 1024 MB (PC2700 DDR SDRAM)
BIOS Type Phoenix (02/16/04)
Communication Port ECP Printer Port (LPT1)
Any advice or direction would be greatly appreciated! Thanks in advance!

A:Realtek Ac97 Audio "this Device Cannot Start. (code 10)"

Hello blackberet,

This device cannot start. (Code 10) basically that there are driver problems. have you looked on HPs website for software for your specific laptop?

Read other 5 answers
RELEVANCY SCORE 61.6

Helo! I have an HP Envy and since window 10 32 bits update I wasn't be able to have audio reproduction. After downloading de Realtek driver from Realtek page, could only solve the audio with external controller such as speakers and headphones, but still not able to use the computer speakers, so I decided to download the driver from your page but is not available for windows 10, so I ask you for some help in order to recover the complete audio function. Thanks! HP Envy, Realtek, audio controller, Windows 10, 32 bits

Read other answers
RELEVANCY SCORE 60.4

Dear All,

Actually I have formatted my HCL M622UCX PC and installed it again. But I found that I could not play any audio in it. I have installed Realtek AC 97 driver but showing erro code 10...I have searched the whole internet and could not resolve it....But in this site I saw one problem similar to mine one.... I hope this forum will surely help me

The Hardware ID and Vendor ID is below;

PCI\VEN_8086&DEV_266E&SUBSYS_2040161F&REV_04
PCI\VEN_8086&DEV_266E&SUBSYS_2040161F
PCI\VEN_8086&DEV_266E&CC_040100
PCI\VEN_8086&DEV_266E&CC_0401

Please please help me out....I will be ever grateful to this forum and site.
 

A:Realtek AC' 97 Driver (code 10) error

PCI\VEN_8086&DEV_266E&SUBSYS_2040161F&REV_04
PCI\VEN_8086&DEV_266E&SUBSYS_2040161F
PCI\VEN_8086&DEV_266E&CC_040100
PCI\VEN_8086&DEV_266E&CC_0401
Click to expand...

According to the vendor and device codes you submitted, your computer has this sound device:

Analog Devices ADI / SoundMAX Digital Audio

----------------------------------------------------------
 

Read other 2 answers
RELEVANCY SCORE 59.2

It's been a year since I migrated from Windows XP to Windows 7 which I downloaded Realtek HD Audio Manager R2.70 and audio has been working fine except the only issue it didn't come with 'Stereo Mix' preventing capability to record sound direct from the soundcard. It took me 14 months to restore Stereo Mix as each time I was told to update audio drivers I would update HD Audio Manager so what is the difference between these two Realtek ?

I installed Realtek HD Audio Driver R2.72 last night and it restored Stereo Mix which now enables me to record system sound whilst using screen recorders.

Thanks

A:Difference between Realtek HD Audio Manager & Realtek HD Audio Driver

  
Quote: Originally Posted by Swiftkidd


It's been a year since I migrated from Windows XP to Windows 7 which I downloaded Realtek HD Audio Manager R2.70 and audio has been working fine except the only issue it didn't come with 'Stereo Mix' preventing capability to record sound direct from the soundcard. It took me 14 months to restore Stereo Mix as each time I was told to update audio drivers I would update HD Audio Manager so what is the difference between these two Realtek ?

I installed Realtek HD Audio Driver R2.72 last night and it restored Stereo Mix which now enables me to record system sound whilst using screen recorders.

Thanks


Realtek HD Audio Manager is a software driver used on Windows computers. It handles recording and playback of audio programs. It is required for many audio programs to operate.

While Realtek HD Audio Drivers is a tool that allows you to listen to audio in HD on your PC.

Stereo Mix is used to transfer audio that the PC is playing to recording software such as Audacity, so that you can record what you?re hearing.

When one upgrade their OS like in your case from XP to Win7 with the same motherboard and sound card it is always advised & recommended to download the latest soundcard driver, because the only thing that had changed was the operating system.

The advice is not to go to windows for it, but to go to the motherboard manufacturer, because it would be specialised for the system rather than ... Read more

Read other 2 answers
RELEVANCY SCORE 58.8

Hi. Today a co-worker got an error on her computer. It reads:
Realtek HD Audio Manager
Access violation at address 7E42948D in module 'USER32.dll'. Read of address 0179B004.
OK

I've searched for this error, but nothing seems to come up that is helpful.

I know it is related to the audio. I don't have access to the computer all the time.

Any suggestions would be greatly appreciated.

Thanks.
 

A:Realtek HD Audio Error

Try re-installing the sound driver.
If you don't have it to install, you can download it from the PC manufacturer's website.
It may be a good idea to uninstall the existing sound driver first in case it's corrupted.
Installing new driver over the old one should fix the corruption but better play it safe and remove it first.
 

Read other 2 answers
RELEVANCY SCORE 58.4

HP Pavillion zx5000
Intel Pentium 4
3.20 GHz
1 GB RAM
Windows XP Home Edition SP3

My friend's laptop is having trouble recognizing its sound driver (Realtek AC97). The hard drive was replaced and the operating system reinstalled a couple months ago, and ever since then it hasn't been able to play sound. Under the Device Manager, Realtek AC'97 Audio has a yellow exclamation point next to it, and under its Device Status it reads "This device cannot start. (Code 10)".

I've tried uninstalling and reinstalling the device, as well as downloading the most recent driver (the most recent seems to be 4.04), but to no avail. I'm not sure what else I can do at this point.

On other boards that I've looked at people have asked what motherboard was being used. I used Everest to find the following information under "Motherboard":

Motherboard:
CPU Type Intel Pentium 4, 3200 MHz (16 x 200)
Motherboard Name Hewlett-Packard Pavilion zx5000 (DZ313U#ABA)
Motherboard Chipset ATI Radeon 9100 IGP
System Memory 1024 MB (PC2700 DDR SDRAM)
BIOS Type Phoenix (02/16/04)
Communication Port ECP Printer Port (LPT1)

Any advice or direction would be greatly appreciated! Thanks!
 

A:Realtek Ac97 Audio "this Device Cannot Start. (code 10)"

OK you probably thought of this first thing but don't laugh when I ask: after the clean install, did your friend run the motherboard disk for his machine? Because the AC97 drivers are on that cd. He should disable it in "devices' and install the driver from the mobo cd and then enable it again and reboot. Should have sound. Only other thing is it could be disabled in the bios - you could check that too.
Mini
 

Read other 2 answers
RELEVANCY SCORE 58

Hello. I have a new Compaq CQ58-353EM laptop. It came with preinstalled system (Windows 8). Afterwards I installed Windows and HP updates. The problem I have is with the Realtek PCIe FE Family Controller (ethernet). In the device manager it is shown with a yellow triangle with an exclamation mark. In the device state it is stated: Your computer's system firmware does not include enough information to properly configure and use this device. To use this device, contact your computer manufacturer to obtain a firmware or BIOS update. (Code 35). Laptop has all system and hp updates installed. I tried the following to resolve the problem:- 2 different bios versions (F.26 and F.25).- several add/remove/reinstall of the Realtek drivers- 2 different versions of Realtek drivers: 8.3.730.2012 and 8.20.815.2013 (from Realtek site). Ethernet is working OK under Ubuntu. Any suggestions or solutions to the problem? 











Solved!
View Solution.

A:Realtek ethernet driver error code 35, Compaq CQ58, Windows ...

Test new BIOSCQ58 Notebook PC and HP 655 HP Notebook System BIOS Update (AMD Processors)VERSION:F.27 http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64675.exe

Read other 10 answers
RELEVANCY SCORE 58

Hi,

I have been trying to help my friend reinstall Windows XP on his Gateway 6520GZ and after a full reformat and reinstall the sound is not working. I first tried downloading all of the support drivers from the Gateway website, but no luck there. I have been searching on all sorts of forums and found several different solutions that other people found that did not work.

I have tried multiple Realtek AC'97 codecs (WDM_A404 and WDM_R186) which were both suggested on one forum or another. I believe that the computer has a realtek chip from what I could find, but I'm not positive. One of these actually installed, but the problem is that when I try to install the Conexant AC-Link Audio driver (Conexant_Audio_6.14.10.0565) I get a message saying that the device cannot start [code 10]. Currently in the device manager I can see the "Realtek AC'97 Audio" driver, but there is an exclamation point next to it. I am at a complete loss at this point and open to any help I can get. Anything would really be greatly appreciated.

Thanks so much,
Mike

A:error code 10 when installing Realtek AC'97 and Conexant AC-Link on Gateway 6520GZ

try this driver. I know it doesn't say it's for that particular model, but it is the correct driver though. I got the info from a tech at gateway.

http://support.gateway.com/support/d...&uid=200884642

Read other 4 answers
RELEVANCY SCORE 58

I found that with the Realtek HD Audio drivers my sound is low and microphone is barely audible, so I uninstalled them and installed the AC97 drivers hoping that would fix the problem. Well, it didn't.

When I uninstalled those and went to reinstall my HD audio drivers (from device manager), halfway through installation my computer gets the blue screen of death and shuts down. Microsoft calls them 'stop errors'. So now I'm without sound altogether. If anyone could help I would really appreciate it!

Running Windows XP with SP2

A:Realtek HD Audio Install Error

I googled my problem and apparently it's a known problem and I downloaded a hotfix or whatever it's called and it didn't work... any ideas anyone?

Read other 3 answers
RELEVANCY SCORE 58

So i have XP sp2 and all components work but the audio hardware not :|
I tried to instal the driver but it didn't work.Almost at the ending it crashes and saying :"Install Realtek HD Audio driver failure!"
In bios is activated audio HD realtek.What could it be ? i instaled win2kxp to that i founded on the original cd but it doesn't work.
 

A:Realtek audio driver error

Ok maybe the driver isn't good so roll back the driver and install this one it is the latest driver from Realtek for HD Audio Device release the 20th August. Download

If the problem continue just come back and put a reply.
 

Read other 3 answers
RELEVANCY SCORE 58

hi,

I can't install the realtek drivers!!
I've tryed everthing from new drivers to re?nstalling XP and still can't get those drivers to work.
Everytime I try to install them I get:

error 0x0000227 and then it just shutsdown

You can imagine me being verry angry because it's the second time I have this problem, the first time was when I bought the board and now I have it because I bought a new HDD.

I don't know how it comes that it started working the first time but it did.

o I use windows XP SP3, I don't have microsoft UAA drivers installed or any other driver for that matter. My motherboard is a MSI K9VGM-V. The CPU is an AMD athlon X2 4800+

please help me because i don't want to buy a qound card for a budget PC.

greetz,

reaper

A:error 0x0000227 realtek HD audio

Hi reaper unique, welcome to TSF...

have you tried going to Windows Updates and choosing the 'custom' scan? That should detect you have no drivers for your sound card and may be able to sort it for you.

Read other 11 answers
RELEVANCY SCORE 58

It's been about 2 years since I last had this problem on Vista, but it seems that it's happening again with Windows 7.

Windows has detected that audio enhancements for the following device are causing problems

Speakers(Realtek High Definition Audio)

Disabling the enhancements gives me sound again, but I know there was a solution with Vista.

It first happened today after 3 weeks of using the R2.34 drivers without incident, but now both that and the new R2.35 drivers are doing the same thing.

Has anyone else had this problem or know the solution? Thanks.

A:Realtek HD Audio Enhancements error

Hello and welcome to the forums.

Are you using a sound card, or is your sound onboard?

Read other 4 answers
RELEVANCY SCORE 57.2

HI,           I bought lenovo ideapad 110-15isk 80ud. my problem is i want to install realtek audio drivers to setup 5.1 home theater. But ideapad has conexant hd audio drivers. After installing realtek audio drivers, control panel (programms & features) it shows realtek drivers are installed successfully. But they are not working.                                 I tried to uninstall conexant hd audio drivers through device manager and deleted the files present in the programm files and drivers folders. but after restarting the pc it is automatically installing the conexant hd audio drivers which configures stereo sound only.                                 pls help me how to install reltek audio drivers in my ideapad


























LENOVO 2.jpg ?335 KB

A:Realtek audio for ideapad 110 15isk error

Hi  Hari333,Installing the drivers for realtek will not work. The drivers only work when the corresponding hardware components are on the system. If you want to install a 5.1 home theater then you may need to install a usb sound card. Hope this helps.Cheers,





Did someone help you today? Press the star on the left to thank them with a Kudos!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"

Read other 1 answers
RELEVANCY SCORE 56.8

I am using a Gateway MX6030. It crashed and I had to replace the hardrive and I formatted it and used the restore that originally came with my computer, but my sound is missing. I've tried unistalling and reinstalling the driver, but nothing. It says the device cannot be started. I don't know if this has anything to do with it, but my PCI modem also doesn't have a driver and I can't find one for it. Here are the pics for each problem.

PCI Modem error message:
http://img385.imageshack.us/my.php?image=68053307jq8.png

Realtek AC'97 Audio error message:
http://img385.imageshack.us/img385/5301/83241346fl8.png
 

A:No sound. Please help!!! Realtek AC'97 Audio Error 10: Device cannot be started.

Read other 16 answers
RELEVANCY SCORE 56.8

Hello guys,

I got a computer running Windows XP (SP3) with Intel motherboard (D915GEV). I currently have working sounds but I cannot use the "Stereo Mix" function to record what I hear through the speakers. I only get a short static noise every couple of seconds.

Looking in Add/Remove Programs I see these two sound drivers:
*High Definition Audio Driver Package - KB888111 (probably responsible for the working sounds)
*Realtek High Definition Audio Driver (that I see no evidence of being installed apart from the existence of Realtek folder inside "Program Files".

This is what I see in Device Manager menu (only the Microsoft UAA driver appears, no Realtek whatsoever):
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting

Plus, in the past the PC used to have AC'97 driver installed as well but I unistalled it months ago.
I tried to remove the Realtek driver but I get this annoying error:
Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
I also get the same error whenever I try to launch a newer version of Realtek HD Audio driver installer, or even execute the AC'97 driver installer.

I created another (second) admin account and the uninstallation worked as it should, but back to my current account it is still present under Add/Remove Programs.

Is my Registry corrupted? Or is this about User permissions not set right?
Thank you

A:Error uninstalling/installing Realtek audio drivers

The Microsoft driver showed Realtek at the end. So you uninstalled the Microsoft/Realtek driver that was downloaded from Windows Update automatically. And the original AC97 Reatek driver is still on your computer. To reinstall it, download it from the Intel Website: https://downloadcenter.intel.com/Det...ng&ProdId=1674

Read other 8 answers
RELEVANCY SCORE 56.8

I'm running windows 8.1 on Toshiba Qosmio X875 Q7190. My computer kept crashing after trying to install Sabrent display adapter. I booted into recovery and did a system restore. Everything works fine now except the sound. I have visited Toshiba's website and downloaded the most recent Realtek drivers. When I install I get the error "HD Audio Driver Failure error code: 0xC0000374". If I go to device manager it shows realtek but with an error next to it. If I look under playback devices nothing is listed. I have deleted the drivers and tried letting the computer install them automatically but that doesn't work either. Two solutions I have seen were to disable and delete Microsoft UAA HD bus driver, but that is nowhere to be found on my machine and the other solution was to enable on board audio in Bios, but that optioin doesn't appear in UEFI.

After my first system restore I no longer have any additional restore points, so another restore is not an option.

Any idea how I can fix this issue?

Thanks

A:no audio devices are installed, realtek error 0xc0000374

Hi, try to install the generic drivers from Realtek.

Read other 2 answers
RELEVANCY SCORE 56.8

Help. I recently did a clean install of Windows 7 64bit (on my HP Vista 32 machine). Life is grand! My problems started when I tried to listen to the microphone input through my speakers. The front microphone inputs did not work so I downlaed the Realtek HD Audio Drivers (recently updated) from the realtek site. The inputs now work and I can record from the microphone through the Sound Recorder app in Accessories but can not hear the microphone through the speakers while I am recording. After searching the web I noticed a lot of chatter about setting things up in the Realtek HD Audio Manager. This app does not show up in my control panel. Does anyone know where I can get it (if I really need it). The Realtek site only has the driver download (not the manager). Am I missing something, am I confused, or both?

A:Realtek HD Audio Manager and Realtek Audio Driver

  
Quote: Originally Posted by NTexan


Help. I recently did a clean install of Windows 7 64bit (on my HP Vista 32 machine). Life is grand! My problems started when I tried to listen to the microphone input through my speakers. The front microphone inputs did not work so I downlaed the Realtek HD Audio Drivers (recently updated) from the realtek site. The inputs now work and I can record from the microphone through the Sound Recorder app in Accessories but can not hear the microphone through the speakers while I am recording. After searching the web I noticed a lot of chatter about setting things up in the Realtek HD Audio Manager. This app does not show up in my control panel. Does anyone know where I can get it (if I really need it). The Realtek site only has the driver download (not the manager). Am I missing something, am I confused, or both?



Welcome to SF!
Realtek HD Control Panel is in the Windows notification area. See image below. I hope I helped!

"PLEASE REP ANYONE WHO HELPS YOU"

Read other 7 answers
RELEVANCY SCORE 56

Dear Users,

I have an issue with audio driver installation. When I try to install it, I get this error:

Full details:

Kod błędu: -5006 : 0x8000ffff
Informacje o błędzie:
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\ObjectHolder.cpp (442)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kernel\ServiceProvider.cpp (87)
>Kernel\FileGroup.cpp (525)
>Kernel\ServiceProvider.cpp (120)
>Kerne>SetupDLL\SetupDLL.cpp (1299)
pAPP:Realtek High Definition Audio Driver
PVENDOR:Realtek Semiconductor Corp.
PGUID:f132af7f-7bca-4ede-8a7c-958108fe7dbc
$11.50.0.42618
@Win... Read more

A:Error -5006 : 0x8000ffff in Realtek Audio Driver Installation

That driver is showing that its for XP SP2. There >> IS << a driver for it already on your comp
Suggest you go to device manager look for >>Problem devices<<,
or at the audio driver itself
Select update driver > browse >> let me pick >> my comp >> uncheck compatible devices >> scroll to Realtek >> select from right hand pane. (select and update)

Roy

Read other 1 answers
RELEVANCY SCORE 56

My motherboard is ASUS P8P67-M Pro. The manufacturer doesn't mention any drivers for Windows 10 x64 on their website as you can see here: https://www.asus.com/Motherboards/P8P67M_PRO/HelpDesk_Download/ I tried to use Windows 8.1 x64 drivers, Windows 8 x64 drivers and Windows 7 x64 drivers. None of them worked. I even tried to download drivers directly from Realtek website, it didn't work as well. I am pretty sure the drivers should be fine and work, but I think there is a problem with my operating system. I remember in the past I tried to install printer drivers and I had issues as well (while it worked fine on another PC, only this PC had issues installing the driver) and I also have problem installing the new feature update (Windows 1703), it always ends up with an error, so I can't update to this version as well.
I don't know what to do and I was thinking about re-installing windows, but it is very time consuming for me and I prefer a short solution to resolve this.
Is there any chance someone has any idea how to resolve this problem?
Thank you
 

Read other answers
RELEVANCY SCORE 55.6

I installed the Realtek HD audio driver from the ASUS download site (P8Z68-V Pro MB) and all was well until I installed an MSI 560TI video card and let it install the Nvidia HD Audio drivers. The problem I have been chasing ever since was the Realtek HD Audio Manager popping up after the system exited extended sleep state (overnight). After much trial and tribulation and several Google Searches I concluded that the Realtek/ASUS HD Audio driver was conflicting with the Nvidia driver(s).

I did what suggested on one of the sites and that was to delete the Realtek HD Audio drivers and just let W7 install the default Microsoft drivers. Problem gone! Now I am curious, what did I give up and if I install the latest Realtek driver for W7 64-bit (v267) from the Realtek site will the Nvidia conflict return?

A:ASUS/Realtek, Latest Realtek versus default W7 Audio driver

Generally the Microsoft installed HD Audio Codec does not have all the features the motherboard vendor's sound drivers do. In most cases the actual driver is preferred and should be installed instead of the generic HD Audio Code drivers.

The NVIDIA driver is for the Video and the build in audio for HDMI audio. It should not be interferring with the PC's sound and in this case Realtek. I would uninstall the Microsoft drivers and reinstall the RealTek and see if you still have the problem. Generally a driver causes problems when exiting from sleep mode. Actually on "extended" sleep mode of overnight its really better to just shut down the system and then reboot in the morning. If you want it to be operational when you wake up, the BIOS should have an option for auto power on at whatever time you set.

Read other 3 answers
RELEVANCY SCORE 55.6

Hello all, I just got Windows 8.1 Pro as a gift from a friend and installed it just a few hours ago, and I noticed that I am having audio problems.

Basically put, it's sort of random when this happens, but it seems to happen when sounds play rapidly, as letting a audio que play it's part will play with no popping nosies, here is an example of me showing this by using the sound that plays when you change audio:
Vocaroo | Voice message

The first 10 seconds are me playing the sound slow, with no popping. Then the sound starts popping when I change volume rapidly.

I also checked DPC Latency Checker and everything is running smoothly:
imgur: the simple image sharer

I have all the latest drivers installed, and this happens with with no drivers. I just can't seem to figure out what the issue is here.

EDIT: I forgot to mention that I've tried disabling drivers, removing the USB Keyboard and Mouse, as well as setting the audio to CD Quality.

Thanks in Advance to the person who could help me with this.

A:Windows Realtek Audio Popping Problems (Realtek ALC662)

What type of speaker system are you using ? Monitor with HDMI, check video card settings ? Could be conflicting driver, possibly Video card. Also mattering to speakers used, check for loose connections, something could be disturbing speakers.

Lots of reasons for popping and stuttering. Integrated card or PCI Slot Card?

Read other 10 answers
RELEVANCY SCORE 55.6

I accidentally uninstalled realtek audio driver, and I'm now trying to reinstall it, however, I'm getting errors. 
My desktop is Inspiron 3650, and i tried to install Realtek High definition audio driver from 

Below is the installation log

[OS] : 10.0 -Build : 14393 -Service Pack : 0 -x64 system : 1 -MCE system : 0 -Server system : 0 -System Language ID : 0x0411 -User Language ID : 0x0409[Default Path] : -tcRtkTempDir : C:\ProgramData\Dell\drivers\Audio_Driver_956D8_WN32_6.0.1.7908_A06 -tcISSetupLocation : C:\ProgramData\Dell\drivers\Audio_Driver_956D8_WN32_6.0.1.7908_A06
Collecting inventory ...Checking driver version ... [Realtek Audio Driver for DELL MUP Package] MUP Package Version : 6.0.1.7908
C:\ProgramData\Dell\drivers\Audio_Driver_956D8_WN32_6.0.1.7908_A06\RealtekHDAudio\WIN64\RTKVHD64.sys [Realtek HD Audio Driver] Installed version : 6.0.1.7707 Package version : 6.0.1.7908
Executing update ... [2017-10-24 0:36:43.15] Run Setup Command : C:\ProgramData\Dell\drivers\Audio_Driver_956D8_WN32_6.0.1.7908_A06\RealtekHDAudio\Setup.exe /z[-rpC:\ProgramData\Dell\drivers\Audio_Driver_956D8_WN32_6.0.1.7908_A06\RHDSetup.log]
-------- Realtek Installer response : C:\ProgramData\Dell\drivers\Audio_Driver_956D8_WN32_6.0.1.7908_A06\RHDSetup.log --------[ResponseResult]ResultCode=-1[Install Progress] Confirm Realtek Driver Check Operation System Version OS Information [WINMAJOR Number] = 10 OS Information [WINMAJOR String] = 10.0 OS Information [SYSINFO.nWinMajor... Read more

Read other answers
RELEVANCY SCORE 54.8

Hi folks!

I had an error reading "Notification tool for Realtek Audio Chip has stopped working". I looked on Google for this error and Yahoo Answers came up with this: Acer. Notification tool for RealTek audio chip has stopped working. After nvidia driver update help? - Yahoo! UK & Ireland Answers

Jeezers replies with "device manager > sound video,game controller > uninstall realtek > restart your comp and let windows reload the drivers"

I followed these instructions, but it appears to have killed my stereo mix function. Does anyone know how I could get it back please? I have hunted for it all through my system but just can't find it anymore! I also have all devices shown, hidden and unused ones alike.

Many thanks!

A:Acer Aspire 6930G Stereo Mix Disappeared After Realtek Audio Chip Error

I've been a noob... Checked out this thread:RealTek Audio Chip and downloaded it again. It still comes up with the above error, but at least I have the stereo mix back! Thankyou for reading!!

Read other 1 answers
RELEVANCY SCORE 53.6

I have recently formatted the hard drive and installed Windows XP with sp3. When I install the audio drivers, the sound still doesn't work (no volume control icon appears in the system tray). When I look in device manager, the soundcard does show up there but it has the little yellow exclamation mark next to it and in 'properties' it says 'Error code 10. This device cannot start'.
I have tried different drivers which I got from the Acer support website, but still no joy.
Any ideas?
 

Read other answers
RELEVANCY SCORE 52.8

about a week ago the sound on my laptop stopped working. i got the red x along with the no audio device installed message. i did a system restore, tried downloading a new audio driver, tried updating the driver but whenever i do i get a message that says the driver loaded incorrectly code 10 error wont let it start. i've tried the realtek driver and i get that message, the only time it doesnt happen is when i install the conextant audio driver but that only works temporarily. as you can probably tell i know very little about computers. i have an hp pavilion dv2000 and am using vista. any help/advice would be greatly appreciated.

A:no audio device/ code 10 error HELP!

Hi and welcome to TSF please go here use the auto detect http://welcome.hp.com/country/uk/en/support.html you can then get the correct driver for your model

Read other 8 answers
RELEVANCY SCORE 52.8

about a week ago the sound on my laptop stopped working. i got the red x along with the no audio device installed message. i did a system restore, tried downloading a new audio driver, tried updating the driver but whenever i do i get a message that says the driver loaded incorrectly code 10 error wont let it start. i've tried the realtek driver and i get that message, the only time it doesnt happen is when i install the conextant audio driver but that only works temporarily, so i know my speakers are not busted. i went to the hp website to ind the correct driver but when i attempted a download i got another error message,"Driver Installation Failed: Could not find the device for this driver." as you can probably tell i know very little about computers. i have an hp pavilion dv2000 and am using vista with a 32 bit. any help/advice would be greatly appreciated.
 

A:no audio device/ code 10 error

Read other 7 answers
RELEVANCY SCORE 52.8

Hi

I have an Acer laptop with Windows XP Media center edition 2005 installed.
I updated my media player to version 11 and now I can get no sound at all.
I have gone into Device Manager and that is where I am gettin the above
error message
I am not a computer expert so any help will have to be ***** proof. After this
I promise not to udate ever again

Many thanks
 

A:No Audio Device code error 28

Lol...dont you just love computers!!

Could you download the following progam and run it.....as it opens the 1st page that opens will be called "system summary"...on there will be the details for your "mainboard/chipset"...could you post those details back please
 

Read other 12 answers
RELEVANCY SCORE 52.8

I have a HP Pavilion a1203w computer with Windows XP Pro. When I try to install SiS 7012 Audio from the SiS website or any other site I get this error message when it is installing -536870397. I can't get the driver to install. I do not have the disk that came with the computer.
Thanks
 

A:Error code for audio driver

micron, try these links and see if you can find more info;
http://www.google.com/search?hl=en&...&q=error+536870397+SiS+7012+Audio&btnG=Search
so can we assume you have tried these drivers also?
http://h20000.www2.hp.com/bizsuppor...kId=135&prodTypeId=12454&prodSeriesId=1118267
 

Read other 2 answers