Over 1 million tech questions and answers.

Started with Peak Protection

Q: Started with Peak Protection

About a week ago my husband somehow picked up Peak Performance 2010. I tried to figure out how to get rid of it and the only thing I could do at the time was to use Loaris Trojan Remover. It helped some but my Avast is ALWAYS blocking a different malware every time we go on the internet now and the computer seems to be running slower than normal. Hope you can help!!!HP computerWe run windows XPI have all logs ready to post when requested>It will not let me send the DDS log after I paste it in this area. HELP!!!It goes to connection problems only when I do the paste like it doesn't want me to get your help!EDIT: Posts merged ~BP

RELEVANCY SCORE 200
Preferred Solution: Started with Peak Protection

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Started with Peak Protection

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.If you have already posted a log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.We need to see some information about what is happening in your machine. Please perform the following scan:Please download OTL from one of the following mirrors:This is THE MirrorSave it to your desktop.Double click on the icon on your desktop.Click the "Scan All Users" checkbox.Push the Quick Scan button.Two reports will open, copy and paste them in a reply here:OTListIt.txt <-- Will be openedExtra.txt <-- Will be minimizedPlease download Rootkit Unhooker and save it to your DesktopDouble-click on RKUnhookerLE to run itClick the Report tab, then click ScanCheck Drivers, Stealth and uncheck the restClick OKWait until it's finished and then go to File > Save ReportSave the report to your DesktopCopy the entire contents of the report and paste it in a reply here.Note - you may get this warning it is ok, just ignore: "Rootkit Unhooker has detected a parasite inside itself!It is recommended to remove parasite, okay?"-------------------------------------------------------------In the meantime please, do NOT install any new programs or update anything unless told to do so while we are fixing your problemIf you still need help, please include the following in your next replyA detailed description of your problemsA new OTL log (don't forget extra.txt)RKU logThanks and again sorry for the delay.

Read other 20 answers
RELEVANCY SCORE 69.6

About a week ago my husband somehow picked up Peak Performance 2010. I tried to figure out how to get rid of it and the only thing I could do at the time was to use Loaris Trojan Remover. It helped some but my Avast is ALWAYS blocking a different malware every time we go on the internet now and the computer seems to be running slower than normal. Hope you can help!!!

HP computer
We run windows XP

A:Peak Performance 2010 started it

HELP ME PLEASE!!!!!! I need advise!!!

Read other 2 answers
RELEVANCY SCORE 67.6

DDS (Ver_10-03-17.01) - NTFSx86 MINIMAL
Run by Administrator at 17:41:14.39 on Thu 09/23/2010
Internet Explorer: 6.0.2900.2180
Microsoft Windows XP Home Edition 5.1.2600.2.1252.1.1033.18.479.248 [GMT -4:00]

============== Running Processes ===============
C:\WINDOWS\system32\svchost -k DcomLaunch
svchost.exe
C:\WINDOWS\system32\svchost.exe -k netsvcs
C:\Program Files\Softex\OmniPass\OPXPApp.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\PCHealth\HelpCtr\Binaries\HelpSvc.exe
C:\Documents and Settings\Administrator\Desktop\dds.scr
============== Pseudo HJT Report ===============
mDefault_Page_URL = hxxp://qus9.hpwis.com/
mDefault_Search_URL = hxxp://srch-qus9.hpwis.com/
mSearch Page = hxxp://srch-qus9.hpwis.com/
mStart Page = hxxp://qus9.hpwis.com/
mSearch Bar = hxxp://srch-qus9.hpwis.com/
uInternet Settings,ProxyOverride = localhost
mURLSearchHooks: Yahoo! Toolbar: {ef99bd32-c1fb-11d2-892f-0090271d4f88} - c:\program files\yahoo!\companion\installs\cpn\yt.dll
BHO: &Yahoo! Toolbar Helper: {02478d38-c3f9-4efb-9b51-7695eca05670} - c:\program files\yahoo!\companion\installs\cpn\yt.dll
TB: AT&&T Toolbar: {4e7bd74f-2b8d-469e-94be-fd60bb9aae29} - c:\progra~1\atttoo~1\ATTTOO~1.DLL
TB: Yahoo! Toolbar: {ef99bd32-c1fb-11d2-892f-0090271d4f88} - c:\program files\yahoo!\companion\installs\cpn\yt.dll
TB: CouponBar: {5bed3930-2e9e-76d8-bacc-80df2188d455} - c:\windows\CouponsBar.dll
TB: &Windows Live Toolbar: {21fa44ef-376d-4d53-9b0f-8a89d3229068} - c:\program files\windows live\tool... Read more

A:Peak Protection 2010

Please see last posting from Ed Moseley also.

Read other 5 answers
RELEVANCY SCORE 67.6

How can I please remove Peak Protection 2010? Please help. Thank you.
 

Read other answers
RELEVANCY SCORE 66.8

I can get a desktop eventually with Task Manager however any action after that causes the NT AUTHORITY shut down to occur making it impossible to work with this infection. I have better control in safe mode and can run programs without the shut down. Malwarebytes runs and removes objects but normal startup still has Peak Protection 2010. Is it possible that the MSBLAST is working with Peak Protection 2010 to prevent removal for a normal start up of Windows XP? Thanks you for your advice.

A:Peak Protection 2010 - MSBLAST?

Hello,Please follow the instructions in ==>This Guide<==. If you cannot complete a step, skip it and continue. Since Normal Mode is giving you fits, please use Safe Mode to produce the logs.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Please include a description of your computer issues and what you have done to resolve them.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.Orange Blossom

Read other 1 answers
RELEVANCY SCORE 66

How to remove the virus peak protection 2010? I tried removing it by going to normal mode and safe mode but none of them worked. I also tried last known good configuration, but it didnt work. Please let me know if there is a solution to remove this virus other than clean installation..
 

A:remove peak protection 2010 virus

Read other 11 answers
RELEVANCY SCORE 53.6

Running Windows Vista Home Premium SP2 Dell Laptop. Problem started with severe Secure Protection infestation. Tried the following all with no success: MBAM, EST online, Emsisoft online, Stinger, Panda online and Super Anti Spyware. Anti roots all failed or found nothing, including Sophos, Rkill and TDSKiller.

Finally resorted to Linux kernel based Avira rescue CD. Found 18 infections, some were renamed others stated "archive scan abort". I can probably provide that log if wanted. System now will now boot into normal mode but immediately crashes--strange crash though, it just freezes, no BSOD, no warning, nothing.

So, Secure Protection seems to be gone but the PC is still inoperable. Safe mode with networking is fine, but still crashes when I try to run MBAM full scan and Super Anti-Spyware. Again, this is not BSOD crash just stops running. It will run fine (in safe mode) as long as I do not run AV or anti-spyware.

Having said all that, the DDS log I post will be from safe mode. GMER log is empty...

GMER 1.0.15.15641 - http://www.gmer.net
Rootkit scan 2011-09-04 00:29:00
Windows 6.0.6002 Service Pack 2 Harddisk0\DR0 -> \Device\Ide\IAAStorageDevice-1 TOSHIBA_ rev.FG00
Running: zq4heu2u.exe; Driver: C:\Users\Melody\AppData\Local\Temp\axdiypog.sys
---- Devices - GMER 1.0.15 ----

AttachedDevice \FileSystem\fastfat \Fat fltmgr.sys (Microsoft Filesystem Filter Manager/Microsoft Corpor... Read more

A:Started with Secure Protection, now? Who knows?

Moderator can close this topic. Problem has been resolved.

Read other 2 answers
RELEVANCY SCORE 53.2

Win 98 SE on normal restart displays BBS (big blue screen) with Windows Protection Error. Very difficult to bring back up (like 50 tries) and then prone to instability (freezing mostly). It seemed to be related to vid so I replaced the AGP card(w/GEForce 3ti). Then the HD developed bad spots so I replaced that. Continued instability resulted in a complete teardown, deleteed and reset partitions. Installed Win XP pro sp2 and one device at a time with correct drivers. It ran well for about 8 hours but it then began to hang again.
This problem makes the box all but unusable. Any suggestions?

P4 1.6 256 mb DDR

A:It all started with a Windows Protection Error

Issues like this are often related to a cheap power supply screwing up a perfectly good system.

Read other 1 answers
RELEVANCY SCORE 52

This whole mess started earlier this week. My wife received a virus infested email from a friend. Shortly after, the internet sites started running slower. She then received the "Security Protection" pop-ups. I already had Malwarebytes installed and ran a quick scan which only showed & fixed the Security Protection virus (2 infected files).The computer stayed on the remainder of the night and when she woke up the next morning, it was worse than before. I ran a full system scan which revealed over 40+ infected files. I thought Malwarebytes successfully found all the viruses and the computer ran well for a few hours and then my antivirus program 'Microsoft Essentials' shut down and the computer began locking up. I tried several times thru a hard-boot to run Malwarebytes again but it would run for a few seconds and then shut off. I have ran the various logs requested from reading the other posts but when trying to run GMER, the scan wouldn't finish and would shut off too.LOGS:::DDS (Ver_2011-08-26.01) - NTFSx86 NETWORKInternet Explorer: 8.0.6001.18702Run by Kevin at 20:26:48 on 2011-08-31Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.1022.681 [GMT -4:00].AV: Microsoft Security Essentials *Enabled/Updated* {EDB4FA23-53B8-4AFA-8C5D-99752CCA7095}AV: Microsoft Security Essentials *Disabled/Updated* {BCF43643-A118-4432-AEDE-D861FCBCFCDF}.============== Running Processes ===============.C:\WINDOWS\2440225872:2937818478.exeC:\WINDOW... Read more

A:started with Security Protection Virus now complete shutdown...Please Help!!

This topic is a duplicate of the one properly posted here: http://www.bleepingcomputer.com/forums/topic416950.html Posting more than one topic on the same issue is called double-posting and is not allowed on this forum because it can create massive confusion and in this case make the malware removal process more difficult and time consuming. Therefore, this topic shall be deleted.Please be patient. It may take a while to get a response because the MRT Team members are EXTREMELY busy working logs posted before yours. They are volunteers who will help you out as soon as possible. Once you have made your post and are waiting, please DO NOT make another reply until it has been responded to by a member of the MRT Team. Generally the staff checks the forum for postings that have 0 replies as this makes it easier for them to identify those who have not been helped. If you post another response there will be 1 reply. A team member, looking for a new log to work may assume another MRT Team member is already assisting you and not open the thread to respond.Please note: you should NOT make further changes to your computer (install/uninstall programs, use special fix tools, delete files, edit the registry, etc) unless advised by a MRT Team member, nor should you continue to ask for help elsewhere. Doing so can result in system changes which may not show in the log you already posted. Further, any modifications you make on your own may cause confusion for the helper assisting you and co... Read more

Read other 1 answers
RELEVANCY SCORE 52

This whole mess started earlier this week. My wife received a virus infested email from a friend. Shortly after, the internet sites started running slower. She then received the "Security Protection" pop-ups. I already had Malwarebytes installed and ran a quick scan which only showed & fixed the Security Protection virus (2 infected files).The computer stayed on the remainder of the night and when she woke up the next morning, it was worse than before. I ran a full system scan which revealed over 40+ infected files. I thought Malwarebytes successfully found all the viruses and the computer ran good for a few hours and then antivirus program "Microsoft Essentials" shut down and the computer began locking up. I tried several times thru a hard-boot to run Malwarebytes again but it would run for a few seconds and then shut off. I have ran the various logs requested from reading the other posts but when trying to run GMER, the scan wouldn't finish and would shut off too.LOGS:::.DDS (Ver_2011-08-26.01) - NTFSx86 NETWORKInternet Explorer: 8.0.6001.18702Run by Kevin at 20:26:48 on 2011-08-31Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.1022.681 [GMT -4:00].AV: Microsoft Security Essentials *Enabled/Updated* {EDB4FA23-53B8-4AFA-8C5D-99752CCA7095}AV: Microsoft Security Essentials *Disabled/Updated* {BCF43643-A118-4432-AEDE-D861FCBCFCDF}.============== Running Processes ===============.C:\WINDOWS\2440225872:2937818478.exeC: ... Read more

A:started with Security Protection Virus now complete shutdown...Please Help!!

Hello and Welcome to the forums! My name is Gringo and I'll be glad to help you with your computer problems. Somethings to remember while we are working together.Do not run any other tool untill instructed to do so!please Do not Attach logs or put in code boxes.Tell me about any problems that have occurred during the fix.Tell me of any other symptoms you may be having as these can help also.Do not run anything while running a fix.Do not run any other tool untill instructed to do so!Click on the Watch Topic Button and select Immediate Notification and click on proceed, this will help you to get notified faster when I have replied and make the cleaning process faster.Please print out or make a copy in notpad of any instructions given, as sometimes it is necessary to go offline and you will lose access to them.Run Combofix:You may be asked to install or update the Recovery Console (Win XP Only) if this happens please allow it to do so (you will need to be connected to the internet for this)Before you run Combofix I will need you to turn off any security software you have running, If you do not know how to do this you can find out >here< or >here<Combofix may need to reboot your computer more than once to do its job this is normal.You can download Combofix from one of these links.Link 1Link 2Link 3 1. Close any open browsers or any other programs that are open.2. Close/disable all anti virus and anti malware programs so they do not interfere with the r... Read more

Read other 3 answers
RELEVANCY SCORE 50.8

Hi,
 
This infection has been detected by my antivirus. Please help in removal.
 
This post is a follow up from the following post; http://www.bleepingcomputer.com/forums/t/498333/pumhijackhomepagecontrol-detected-by-malware-bytes-antimalware/?view=getnewpost
 
Regards,
Ynotmat
 

A:Microsoft Forefront Endpoint Protection started detecting Trojan:JS/Seedabutor.C

Hi ynotmatWelcome back FRSTDownload the 32 bit or 64 bit version for your system of FRST and save it to a flash drive.Plug the flashdrive into the infected PC.Enter System Recovery Options.To enter System Recovery Options from the Advanced Boot Options:Restart the computer.As soon as the BIOS is loaded begin tapping the F8 key until Advanced Boot Options appears.Use the arrow keys to select the Repair your computer menu item.Select US as the keyboard language settings, and then click Next.Select the operating system you want to repair, and then click Next.Select your user account an click Next.To enter System Recovery Options by using Windows installation disc:Insert the installation disc.Restart your computer.If prompted, press any key to start Windows from the installation disc. If your computer is not configured to start from a CD or DVD, check your BIOS settings.Click Repair your computer.Select US as the keyboard language settings, and then click Next.Select the operating system you want to repair, and then click Next.Select your user account and click Next.On the System Recovery Options menu you will get the following options:Startup RepairSystem RestoreWindows Complete PC RestoreWindows Memory Diagnostic ToolCommand PromptSelect Command PromptIn the command window type in notepad and press Enter.The notepad opens. Under File menu select Open.Select "Computer" and find your flash drive letter and close the notepad.In the command window type e:\frst.exe (for x64 bit vers... Read more

Read other 25 answers
RELEVANCY SCORE 43.2

Computer has been slow ever since removing SpyAxe... just wondering if there is any other residual nasties still hanging about... Currently running a defrag too, was pretty messed up. Maybe that will get things back in order.
HiJack This Log

Logfile of HijackThis v1.99.1
Scan saved at 6:23:04 PM, on 12/29/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Explorer.EXE
C:\PROGRA~1\CHARTE~1\backweb\3528733\Program\SERVIC~1.EXE
C:\WINDOWS\system32\CTsvcCDA.exe
C:\Program Files\ewido\security suite\ewidoctrl.exe
C:\Program Files\Charter High-Speed Security Suite\backweb\3528733\Program\fspex.exe
C:\Program Files\Charter High-Speed Security Suite\Anti-Virus\fsgk32st.exe
C:\Program Files\Charter High-Speed Security Suite\backweb\3528733\program\fsbwsys.exe
C:\Program Files\Charter High-Speed Security Suite\Anti-Virus\FSGK32.EXE
C:\Program Files\Charter High-Speed Security Suite\Common\FSMA32.EXE
C:\Program Files\Common Files\Microsoft Shared\VS7Debug\mdm.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\Program Files\Charter High-Speed Security Suite\Common\FSMB32.EXE
C:\Program Files\Charter High-Speed Security Suite\Anti-Virus\fssm32.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Webroot... Read more

A:Someone want to take a peak at my HJT log..

Read other 9 answers
RELEVANCY SCORE 42.8

Hey Guys great site im hoping to get some feedback im trying to just improve some performance on my new dell inspiron 1525. thanks guys

A:Just Take A Peak At My Log And Let Me Know Anything Funny

TTT

Read other 3 answers
RELEVANCY SCORE 42

After a very successful malware/trojan removal with the help of OldTimer, I asked a friend at work if they would like me/you clever people to sort out a now unused computer that had been contaminated with some sort of browser high jacking porn dialler. I had already suggested trying Ad-Aware and Spybot S+D many months ago this apparently found problems but dialler would still run when connected to the internet.Here is the HighjackThis log.Thanks Biofriendly.Logfile of HijackThis v1.99.1Scan saved at 00:53:54, on 01/01/97Platform: Windows 98 Gold (Win9x 4.10.1998)MSIE: Internet Explorer v5.00 (5.00.2919.6304)Running processes:C:\WINDOWS\SYSTEM\KERNEL32.DLLC:\WINDOWS\SYSTEM\MSGSRV32.EXEC:\WINDOWS\SYSTEM\MPREXE.EXEC:\WINDOWS\SYSTEM\mmtask.tskC:\WINDOWS\EXPLORER.EXEC:\WINDOWS\SYSTEM\RNAAPP.EXEC:\WINDOWS\SYSTEM\TAPISRV.EXEC:\WINDOWS\TASKMON.EXEC:\WINDOWS\SYSTEM\SYSTRAY.EXEC:\WINDOWS\SYSTEM\MGACTRL.EXEC:\PROGRAM FILES\MATROX MGA POWERDESK\COLOR\HGCCTL95.EXEC:\WINDOWS\SYSTEM\STIMON.EXED:\DIRECTCD\DIRECTCD.EXEC:\LOGITECH\MOUSE\SYSTEM\EM_EXEC.EXEC:\PROGRAM FILES\NORTON ANTIVIRUS\NAVAPW32.EXEC:\PROGRAM FILES\NORTON ANTIVIRUS\POPROXY.EXED:\PROGRAM FILES\REAL\REALPLAYER\REALPLAY.EXEC:\WINDOWS\SYSTEM\QTTASK.EXEC:\FREES... Read more

A:Peak Rate Dialler

Download cwshredder 2.12 from here:http://www.trendmicro.com/ftp/products/onl.../cwshredder.exeRun the file after it is downloaded and click on the fix button. Let it do its thing and when its done, even if it crashes.When its done run hijackthis again post a new logPrint out these instructions and then close all windows including Internet Explorer.Then I want you to fix some of those entries. Please do the following:Please make sure that you can view all hidden files. Instructions on how to do this can be found here:How to see hidden files in WindowsRun Hijackthis again, click scan, and Put a checkmark next to each of these. Then click the Fix button:R1 - HKCU\Software\Microsoft\Internet Explorer,Search = http://acc.count-all.com/--/?ydtfs (obfuscated)R1 - HKCU\Software\Microsoft\Internet Explorer,SearchURL = http://acc.count-all.com/--/?ydtfs (obfuscated)R1 - HKLM\Software\Microsoft\Internet Explorer,Search = http://acc.count-all.com/--/?ydtfs (obfuscated)R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://acc.count-all.com/-/?ydtfs (obfuscated)R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://acc.count-all.com/--/?ydtfs (obfuscated)R1 - HKCU\Software\Microsoft\Internet Explorer\Main,Search Bar = http://acc.count-all.com/---/?ydtfs (obfuscated)R1 - HKCU\Software\Microsoft\Internet Explorer\Mai... Read more

Read other 3 answers
RELEVANCY SCORE 42

Following the prep guide I could not do step five - Firewall enable. Network connections windows is blank. Cannot connect to the internet and canceled the browser window because I'm not sure what it was doing. I have to us the "shutddown -a" command through the taskmanager to keep pc from shutting down from NT AUTHORIITY message. Am having Nortons antivirus activation request on the screen today. Tried the rkill.com and the renamed iExplore and Explorer files to stop the process Peak Protection 2010. I cannot tell if they work, running them back to back the rkill log says that rkill has been shutdown. Tried Malwarebytes afterward which finds infections and removes but after rebooting the infection is still there. I have tried this in safe mode and in standard mode. Infection loads in safe mode as well.The logs were all successful.DDS (Ver_10-03-17.01) - NTFSx86 Run by Administrator at 0:22:41.92 on Sat 09/25/2010Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_20============== Running Processes ============================= Pseudo HJT Report ===============uWinlogon: Shell=c:\documents and settings\administrator\application data\hotfix.exeBHO: {02478D38-C3F9-4efb-9B51-7695ECA05670} - No FileBHO: Adobe PDF Reader Link Helper: {06849e9f-c8d7-4d59-b87d-784b7d6be0b3} - c:\program files\common files\adobe\acrobat\activex\AcroIEHelper.dllBHO: Adobe PDF Link Helper: {18df081c-e8ad-4283-a596-fa578c2ebdc3} - ... Read more

A:Infected with Peak Protection2010

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the ... Read more

Read other 9 answers
RELEVANCY SCORE 42

I would search this in Google, but my internet is capped and only forum site work. I manage to find this out before, but i was wondering how to you get aero peak to work in Chrome. As in Each tab will show up as an picture the taskbar as IE8 does.


I remember when doing it once i had to right click on the icon and click properties, and have to enter a code but i cant not remember what the code was.

A:How to get Aero peak in Chrome

I'm using the latest Chrome Dev build, and Aero Peek works just fine..

Read other 9 answers
RELEVANCY SCORE 42

Hi guys,

I've recently bought a new computer, and it's an issue I've had with another Windows 7 desktop that I purchased before. Unfortunately, when I fixed it originally, I don't exactly remember how because it was after hours of frustrating trial and error.
Anyways, the issue is that while all volume levels are set for peak output, the green/grey volume bar is only going up about halfway. I have been told to check all settings, check my speakers and reinstall my audio driver; however, none of them have fixed the problem. I have plugged my speakers directly into my iPod and they work fine, and I've tried different music-playing software, and the same issue persists.

If anybody has any ideas on how to fix this problem, it was be appreciated.

The link below is a screenshot...

https://dl.dropboxusercontent.com/u/...nd issue.jpg

Thanks,

Jeff
 

Read other answers
RELEVANCY SCORE 42

Hey everyone,

I have been having trouble with my network. I recently, (2 days ago), upgraded my cable high speed internet service from 2mbps down and .2 mbps up to 15 mbps down and 2 mbps up. However, even during non peak hours, pretty much all the time, the best download speed I can get is 4-5mbps. My upload speed stays where it should, at 2mbps. It is really only my download speed I am concerned about, because this happens every day all day. When I first upgraded the service, I got 12-13 mbps download speed, so something must have happened between then and now where I cant receive that anymore. My modem is a doscis 2, not 3, so I am not sure if that has anything to do with it. It is an Arris TM602G/15 model.But as I said, I have received close to the full download speeds before, but not anymore.

Any help? Thanks!

A:Not getting speeds I am paying for... Even during NON-peak

Try contacted the service provider again ? They should have technicians to be able to check it for you. Could also be a line problem, did you add anymore lines to your cable lines inside ?

How are you testing it, where ? Did you change any other settings on PC. Windows does all optimizations for you.

Try resetting the modem, unplug it for 15 seconds, then plug back in. Or unplug and reboot PC. Usually a way to reset the modem back to factory state, need to check your service providers website for your model modem to be able to access it's settings. Usually you type in an address in your browser to access it.

Read other 24 answers
RELEVANCY SCORE 42

Peak Zen CBD Oil controls. Finally, you can successfully accomplish a stable and upbeat manner of lifestyles through using this cbd oil constantly. Top zen cbd oil is fabricated utilising 100% everyday and natural fixings. The fundamental detail of this cbd oil is eliminated from the hemp plant. Individuals envision the sentiment of having high when they pay attention hemp flowers. Anyhow, we want to demand the clients to not interface this cbd oil with that concept. This cbd

https://unitedsupplementreviews.com/peak-zen-cbd-oil/
 

Read other answers
RELEVANCY SCORE 41.6

HI , i have a intel duo that has a new hard drive and a new install of xp pro . all updated ( sp3 ) and all drivers updated .
scanned for virusues . spyware etc . and the computer is so slow it take s 10 minutes before you can open IE to browse the web .

i checked and the cpu it a T5500 Intel DUO with 1 GB memory , and the processor is running at 982Mhz .
I remember when i worked on another compaq / HP pc , it was the energy scheme that that was holding it back , well now its set to ALL time on = max preformance and still no change , i have already tried other energy schemes as well .
any ideas here to why this would be running so slow as it is , takeing ages to accomplish anything on this pc ?
Cheers in advance ,
T

Compaq NX 7400 intel DUO T 5500 , 1GB .
 

A:processor not running at peak performace

Read other 9 answers
RELEVANCY SCORE 41.6

What are some tools that I need to keep my computer at "peak performance"?
So far, I already have the following:
MalwareBytes Anti-Malware
CCleaner
Smart Defrag
Advanced SystemCare

What else should I get?

A:Keeping my computer at peak performance?

Well, for starters, MWBAM is a Anti-malware/Security tool, not a performance tool. CCleaner and Smart Defrag are good choices for performance, I have never heard about Advanced SystemCare - if it includes a "Registry Cleaner", i'd keep away from it. Registry Cleaners usually do more harm than good.

Always keep an eye on startup programs as well (those can affect performance), and be aware of the limitations of your computer's hardware.

Outside of that, I think your doing fine program wise.
How do you feel the computer is running?

Please post your system specs as well.

I'm sure others will chime in.

Read other 4 answers
RELEVANCY SCORE 41.6

hi

I have had the Windows 7 32-bit RTM for just over a day and find the Aero Peak too slow to display the thumbnail images.

My computer is quick, with 2.2 Core 2 Duo, 3GB RAM, Nvidia Geforce 8600m 256MB DDR3, so clearly my laptop isn't the problem. It takes about 1 second to display the thumbnails, I think that's way too slow.

1. How can I make it display thumbnails quicker? Which speed do you recommend?

2. Will changing the speed increase memory usage of Windows processes?

Thanks,

Mani

A:Windows 7 Aero Peak Too Slow! Help!

Mouse Hover Time - Change

Read other 6 answers
RELEVANCY SCORE 41.6

Alpha Peak Block DHT. This unpleasant little hormone is developed in your body when specified minerals come with your own body's own Testosterone Booster supply into contact. DHT practically chokes the life out-of them, stopping them from absorbing vitamins from your system and binds to hair roots. Of taking a highquality DHT blocking product the significance shouldn't be underestimated as DHT may be the key cause of female-pattern baldness. Actually, if you follow only 1 of the three steps, get this to the stage you follow!

http://mirahealthgarciniablog.com/alpha-peak/
 

Read other answers
RELEVANCY SCORE 41.6

Recently the idea of purchasing some more RAM crossed my mind considering how cheap it can be now. After doing some searchin on google, i found mixed feelings towards whether or not you should have more than 1GB of RAM. I also started reading about the Windows Page file. I am running the following system: 3.2GHz P4 with 1GB of RAM. I download alot of torrent files but i am not a hardcore gamer. My question is why does it seem like windows is not using my ram to its full potential. The Peak always shows about 667236, and while i am currently downloading a torrent the page file is at 635MB. Should the page file not only be in use when you need to store more memory than u have RAM? What settings/modifications should I make for optimal performance, and should I get more RAM? I was thinking adding another 512.

At one point i disabled the Page File but Photoshop got mad. Is there anything wrong with disabling the PF, and should u when u have a certain amount of RAM?

Any guidance helpful.
 

A:Solved: Ram+peak+page File

Windows XP always uses the page file for low priority data regardless of how much physical memory is free. If you still have a lot of physical memory free while you are using as much of it as you ever would, you do not need to upgrade your memory. 1GB of memory is usually more than enough for any normal task. And no, it is not a good idea to disable the page file, as you found out.
 

Read other 2 answers
RELEVANCY SCORE 41.6

I like playing Team Fortress 2 but I only get decent latency (~50 ms) outside peak hours (10 a.m. to 7 p.m.), at these hours my latency goes up to 400 ms. I'm wondering if is this is a problem inherent to dsl infrastructure or is it that my isp is worse than average. In Mexico City there are only about 3 internet service providers, Prodigy Infinitum from the country's telecomunications giant(and a monopoly) Telmex is the one I use.
Of course most of their clients use the internet for sending emails and web browsing so I wouldn't be surprised if they didn't care for providing a decent service for gamers.
How does everyone's isp perform for gaming?
 

A:High latency at peak hours

Most ISP's have you on a system with a lot of other users in your neighborhood. What you report is typical. You provider will provide you high speed and bandwidth at an increased price, and then this problem will go away.
We have performed a lot of work in Mexico City and certainly found a great number of providers... not just three... have you talked to repair services in your part of the city.
I do know that the costs are extremely high for service and support, compared to the USofA
 

Read other 3 answers
RELEVANCY SCORE 41.6

After the disappointment of Safari, I was not too keen on trying another browser, but a certain ADDICT twisted my arm and I can say that I am totally impressed.Will take a little getting used to, of course, but this browser is lightning fast and with 3 or 4 addons could be the best browser around.I would strongly recommend that you have a test drive of this one: http://www.flashpeak.com/Let us know what you think.Cheers

A:Flash Peak's New Slim Browser

Slim Browser is based on the Internet Explorer engine, which means it's susceptible to all of the security problems, associated with Internet Explorer.

I think, I'll stick with Firefox.

Read other 4 answers
RELEVANCY SCORE 41.6

For those Hotmail users that haven't noticed the advert on the Home page that keeps appearing, first:

then click

http://by5fd.bay5.hotmail.msn.com/cgi-bin/dasp/demo.asp

and check out the demo of Hotmail's new look! Coming soon to a monitor near you... Rumour has it it will be lauched alongside MSN 9 and is made to mirror Office and Exchange 2003 Outlook Web Access.

I think it looks great!
I remember how great it was when we got the last update for all of you old school Hotmail users
 

A:Next Generation Hotmail Sneak Peak!!!

lets hope its still gonna be free,

its great,,,,,,,,,,,,,,,,, these guys at my crow soft are the leaders

but there also security concerns
 

Read other 1 answers
RELEVANCY SCORE 41.6

Hi,

Does anyone know how to contact PEAK? I've tried googling them to no avail and they're not listed on the ATI site either.

I bought the card 2nd hand and when it boots into windows it has artifacts in the shape of pale vertical lines across the screen. Underclocking doesn't seem to remove this either.

I've got a 350W PSU but I've ordered a 400W incase it's a power problem (but surely underclocking would solve that?) and I've also ordered a fan in case it's a heat problem but the artifacts appear even after a cold boot so I'm wondering if the card has been broken.

If anyone has any advice or knows how to contact PEAK that would be most appreciated.

thanks

Tucky
 

Read other answers
RELEVANCY SCORE 41.6

I have a custom built computer. Below are specs

AMD Duron XP 3200+ (Athlon XP 2.2GHz)
ASRock K7s41 Motherboard
512mb Ram
DVD Dual Layer ReWriter
80 GB Hard Drive
Running Windows XP Home SP2
Norton AntiVirus

I later added a CD-RW and a PEAK ATI Radeon 9800SE 128MB Graphic Card.

The card worked fine on the first day. Later on i notice that the monitor would switch of and i would have no control of the computer. This happened to me many times as i was playing DOOM3. A couple of the times it brought up a message saying something like this:

Your graphics accelerator settings have been reset as they were no longer responding to you commands.

I have had no luck on the peak website.

I just want it fixed because it is really annoying.
 

A:Solved: Peak ATI Radeon Problems

Read other 16 answers
RELEVANCY SCORE 41.6

I'm not running much on this system right now besides Trillian and Firefox, and I've disabled a lot of useless Vista features. But I still notice that explorer.exe's memory peak is at 370,000K. For a system with 2gigs of RAM I know it's not a whole lot, but compared to how much it is with XP's explorer, is this a normal thing or could there be something wrong?
 

A:Vista's explorer.exe Peak Memory is 370,000 K?

yea same here!
 

Read other 1 answers
RELEVANCY SCORE 41.6

This PC keeps crashing more times than you see crashes on the freeway. It comes in bursts. With the time between narrowing until it crashes during loading. Not the BSOD type - just flop - like the electrical power stopped.

Sometimes it seems like its overheated as reason (the temps though read normal).
Other more frequent times its just clicking on a folder - crash. Or scaring it by moving or scrolling the mouse too quickly - crash. As if the exertion was to much. Its not windows. I can reformat or grab another HDD & install win7x64 on it and thump - crash. Sometimes the critter will go for a day or three. Then it starts again. When it happened at the height of last summer the Repair shop claimed it was over heating. They were guessing. When I left it there it never crashed.

The sys. info =

Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz
Gigabyte Technology Co., Ltd. EP35-DS3P
Award Modular BIOS v6.00PG
8.00 GB 8.00 GB
WDC WD5000AAKX-00ERMA0 ATA Device
(1) USB Audio Device (2) High Definition Audio Device
NVIDIA GeForce 7300 GS
Microsoft Windows 7 Professional 64-bit 7601 Multiprocessor Free Service Pack 1
Its a damn good PC I don't want to replace it.

A:PC more crashes than peak hour on the freeway.

I know you said you weren't getting traditional BSOD's, but there may be older ones that give clues. Follow these steps:

http://www.sevenforums.com/crashes-d...tructions.html

Read other 9 answers
RELEVANCY SCORE 41.6

im not sure about this feature

whats special about aero peak!!! how to get this feature!!!

i have activated it but im not sure of how to get this effect

this is what i get!!!

A:whats special about aero peak!!!

With multiple apps open, just like you've done but, you need to hover the mouse over each thumbnail to enable the ture aero peek. A good example is to have several internet explorer tabs open and hover the mouse over each of them.

Read other 5 answers
RELEVANCY SCORE 41.2

Hey guys, I just wanted to say thanks for taking the time to look at this post. Anyway, I'll get right to the chase, just recently I have purchased the Motorola SB5120 modem and the Linksys WRT546 router, the reason being is because my old modem was extremely out-dated and we needed an easier way to connect my two other computers. All has been working fine until this past week or so, and it seems that my modem just likes to go into a standby state, by itself, from 11 a.m. until 8-9 p.m. central. This will occur regularly about every 5 minutes to an hour for the entire day, the "standby" mode will last for only about 10 seconds, usually just long enough to kick me off from whatever I may be doing at the time. The modem says its working fine though, and even the Cox guy said it was running at optimal performance. At first I believed it to be just some minor difficulties with the network I setup for my family, but that wasn't the case. I've tried resetting everything and just starting from scratch but nothing works. We called the Cox Support team, again, and again, I was told to reset everything. If anyone has any solutions, please let me know. Thank you.
-Silent Reyn​
 

Read other answers
RELEVANCY SCORE 41.2

Hi I am running Windows XP SP2 and have a adsl broadband with a Belkin wireless modem/router. I have just bought a Peak Wireless Network Camera (model 3531CLPK330W) which has an inbuilt web server which can feed a video stream to the internet without needing an attached pc. You just configure it with the pc after connection to the router and then let it get on with sending out video irrespective of if the pc is on or not. The stream can be viewed on any web browser with Active X or java.

OK, I can connect it fine to my network, the router assigns it an IP number and I can view video fine on any machine within my network of 4 pc's. At present, for example my main pc has network IP number 192.168.2.2 and the netcam 192.168.2.4. My ISP IP number (Dynamically assigned) at this time is 86.30.20.33.

I have asked various people online to check the camera's IP number but (not suprisingly being a number on my network) they cannot see it. As I say, it works just fine within my network.

The netcam is configurable vis web browser controls and has various options regarding TCP numbers etc that I am reluctant to interfere with until I have a better idea what I am doing.

Can anyone advise me how to configure the netcam so it can be accessed from the internet?

Many thanks
 

A:Peak Wireless SOHO Netcam problem

Is your Web IP address (sometimes also called WAN IP, external IP, etc), i.e NOT the 192.168.. IP address a static or a dynamic IP address? You'll have signed up for one or the other with your ISP.

I suspect it is the latter; thus from time to time (the frequency depending on your ISP) it will change, hence the name(!), and your external users will have difficulty accessing your webcam.

Your either obtain a static IP from your ISP, these tend to cost a couple of quid more per month, or you can stick with the dynamic IP address, but you can sign up to a Dynamic DNS service. This will allow you to obtain a name for your site/webcam (e.g. fred.domain.com or whgatever) and the DynDNS serivce will keep your name current with your dynamic IP. You will find that www.dyndns.com, or www.no-ip.com (to name but two, there are many others) offer a basic free service that may meet your needs. You'll need to run a little program on either your router or a PC on your LAN that periodically notifies the DynDNS service when the WAN IP changes: some routers have such software as standard, or your can check your DynDNS providers site as they often provide such software for download.

Your friends need never beinformaed of the WAN IP numbers; you just tell them the memorable name you configured up with the DynDNS provider.

The 192.168... are private LAN addresses and are not routable over the Internet.
 

Read other 1 answers
RELEVANCY SCORE 41.2

Hi!

I believe this is a performance issue. I just moved to Windows 7 from Vista. Occassionally, the Office 2007 applications will not show a preview using Aero Peak. (This happened in Vista but of course without Aero Peek).

The issue seems intermittent and doesn't affect all open Office applications -- just usually Excel or Outlook. Here's a picture of what I mean. (Note: This is an image I found online that I'm pasting here to save me the trouble of a screen shot)

http://img18.imageshack.us/img18/9890/desktoplrv.jpg

Any ideas, anyone?

Thanks so much!

A:Aero Peak Issue - Office 2007

Hello MakeITfunctiona,

Welcome to Seven Forums.

I have this with Excel, the taskbar thumbs don't show the file just an icon. Unfortunately I haven't found a cure. Hopefully a fix will come.

Gary

Read other 3 answers
RELEVANCY SCORE 41.2

Male Peak Ultra Building slender muscle body requires exceptional exercise sessions and adjusted eating routine. Be that as it may, it is difficult to keep up this solid routine in our bustling timetable. To improve size of muscle while keeping fat levels to a base, you definitely need to prompt high nitric oxide level. This is on the grounds that nitric oxide in body guarantees legitimate blood stream, supplement conveyance, physical quality and protein union. In this way, supplements assume a key part in muscle building.

http://www.newsletter4health.com/male-peak-ultra/
 

Read other answers
RELEVANCY SCORE 41.2

When I first log on after boot up and immediately open the windows Task Manager I always find a peak commit charge of around 427450 (see attachment) plus or minus 50.

Because my daily applications never use this much memory this peak charge does not increase during the day. But next morning at start up there it is again, very consistent.

Microsoft Bootvis shows only explorer.exe and Sygate Personal firewall running at start up.

HiJackThis shows nothing of concern (see attachment)

dxdiag shows no problems.

How can I determine what is using so much memory at start up?

XP Home SP2, ASUS A8V Deluxe, AMD Athlon 64 3000+, 1 GB (dual 512) Kingston, everything latest updates and versions.
 

A:Large peak commit charge at start up

Read other 16 answers
RELEVANCY SCORE 41.2

Hello everyone, I recently bought a SSD and installed W7 64-bit on it ( 2 weeks ago ). Ever since when my transfer rate reachs more than 1+MB/s internet cuts out on the WHOLE house. Other members of family can download at 4-5 mb/s without problem. I'm using NetLimiter to stay under 1MB/s and prevent that from happening. But I have a 60 mpbs connection and can't even profit from it ... I never had such problems. I would also like to solve this problem without reinstalling Windows because I heard erasing data from SSD's is bad (?) .

I use POWER LAN TOPCOM 85mbps ( internet through electricity ) if it helps. I tried reinstalling drivers of network card, even installed drivers for the TOPCOM. No results !

I'm desperate to fix this ask for any extra information you guys might need.
 

Read other answers
RELEVANCY SCORE 41.2

So I moved in December to a very small town. I got Cass Communications cable internet 15mb dl for $100 a month which is a terrible price for the speed but it's the best I got here. It was very very consistent internet, always right around 15-17 speeds with no packet loss and was great for gaming/streaming. Well now they have doubled the speeds to 30mb dl and it's great during the day when no ones using it but come 8 pm central it is absolute garbage. Without fail at night it slows to a crawl.

I don't know what to do at this point. I have contacted their tech guy and told him and he said their were some noise issues or something and that it should be better but it's not. From 8 till 12 am it's useless, streams buffer and gaming is impossible since your ping is about triple what you're used to and fluctuates so much you can't even tell what's happening in multiplayer. I have contacted him again asking him what we can do to fix this and he said "Your modem is on probation so we can look at it" or something and now he's ignoring anymore emails i've sent. The only other option I have is a 6mb DSL service that's pure crap too. Is their anything I can do?
 

A:Internet terrible during peak hours since upgrade!

I don't understand what "modem is on probation" means. If it is your modem then investigate to see if it is a problem. Is it DOCSIS 1, 2 or 3? I'm not sure what the actual maximum downloads for those specs are (you can look them up on the web), but an old (five years or more) or DOCSIS 1 modem may well be the issue. If it is the ISP's modem then you need to get them to investigate/solve any modem issue.

Otherwise there is nothing you can do except keep pestering your ISP. Speaking from the experience of having ISP issues for months and months (now working fine for three months) use various channels. In addition to calling there may be (sometimes difficult to find) ways to chat or email. If you don't get anywhere with a given chat session try again the next day because the rep will almost guaranteed be somebody different.
 

Read other 1 answers
RELEVANCY SCORE 41.2

Greetings All,

Hope this is the correct forum. I just recently purchased an off lease HP NC6230 laptop pre-loaded with XP Pro SP 2. The laptop boots ridiculously fast and all programs operate flawlessly. My question is more out of curiosity than anything else as I don't have any issues...yet. I want to make sure I don't have a possible future issue that will cause me to have to reinstall XP or do something else and thereby lose all the programs I'm about to download/install.

Only because I recently added memory to my other HP laptop and my older Dell Dimension desktop am I now more familiar with Task Manager. So the first thing I did after booting up the NC6230 was check the task manager. I have 2 GB RAM and my concern is that the Peak Commit Charge right after startup is at 1.8 GB. My other HP laptop has 2 GB and, even after using programs all day, maybe hits 1.2GB. Same with the Dell.

It's not causing a problem but I can't figure out what's loading. There's barely anything running in the process list - the program totals don't come close to the peak charge. I did the usual cleanup in MSCONFIG startup but there's nothing there really. I then did a safe mode boot up and the peak was around 400K so there's definitely something loading or causing this "spike" during regular boot.

I've read tons of threads about similar issues but not where the safe mode is so much less. I wouldn't even sweat it but my oth... Read more

A:Large Peak Commit Charge at Startup

Commit charge is not limited to showing physical memory usage.
It includes pagefiles/virtual memory.
Take a look here for more....
http://en.wikipedia.org/wiki/Commit_charge
 

Read other 3 answers
RELEVANCY SCORE 40.8

Hello,

I am running Windows 7 on a Dell Inspiron 17R laptop. Inside the program "Dell Support Center" it tells me that BITS - Demand Started to Auto Started. I don't know what BITS is so I need some help. It runs in the System Services. Should I disable the BITS?

Heres a screenshot:

http://imageshack.us/photo/my-images/846/errorxw.jpg/

Thanks!
 

A:BITS Demand Started to Auto Started Error

masterchiefxx117 said:


Should I disable the BITS?Click to expand...

Here's some information About Windows BITS The answer to that question is No. Read the articular to learn Why.
 

Read other 3 answers
RELEVANCY SCORE 40.8

I have recently been infected by scorpion saver ( adpeak) , witch also encompasses monster ads and ad choices, I am not sure where I picked it up but seemed to start after an adobe upgrade,,,,,,,,,,,,,,, for about a week when you googled adobe it would say adobe . com , but have a circle with a "MAC" I in it and say I download safety. , after that I could uninstall all adobe programs and reinstall but still cannot watch video in you tube through IE10. ( I have to go to Mozilla to watch video contend , tried reinstalling ie 10 no luck---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------MAIN ISSUE~!!!!! scorpion saver , I have avg m spybot portable , maleware bytes and Ccleaner , I uninstalled all bad programs through Ccleaner and cleaned registry. updated spybot and immunized , updated avg , and malewarebytes , rebooted in safe mode ran all three and kapersky root killer. program was off , but next shutdown it came back , I found a manual page on eliminating scorpion saver and followed it and it went away when I rebooted and save the page to my favorites it returned , ( it gives red and blue underlined itens on web pages and redirect ant surfing , also if gives you 4-6 adds at the top of google , and 6-7suggestions to buy at bottom of page , also spams me on all e-mail. please tell me how to fix this or should I run a few programs and recover the hd... Read more

A:Scorpion saver by ad peak ( also monster ads & ad choices) cannot remove , help

Hello to remove this we need to get a deeper look. Please follow this Preparation Guide, do steps 6,7 and 8 and post in a new topic.Let me know if all went well.

Read other 5 answers
RELEVANCY SCORE 40.8

September pm

google.com

I am lucky that I found this web blog Brain Peak just the right information that I was trying to find

September, pm

Trilobite

When someone searches for his necessary thing,

Therefore he she needs to Brain Peak Cerebral booster Scam be available that in detail, so that thing is maintained

Over here.

September is

Mobiles ripo.lv

Then, tuck it under a covered area to make sure.
http://www.advices4health.com/brain-peak/
 

Read other answers
RELEVANCY SCORE 40.8

Hi there, I got 64bit win 7 pro for Christmas, only problem my tv card no longer works. I can not find 'the' or 'a' driver for the above model.

I have the original xp/vista driver disc,both XP/vista 32/64 and note that the card is still being sold. If the card is still being sold "With win 7 support" then someone may have a copy of the driver laying around.

Could you please help me out and put up a link or such?

Many thanks


Ian

A:PEAK single tv tuner 103906AGPK driver wanted

Hi... have you checked in the Windows 7 Compatible Hardware Centre that it's even supported?

Read other 3 answers
RELEVANCY SCORE 40.8

For 2 years I have managed my wireless Peak router from XP Home. I have just purchased a Tosh sat pro L300-11d, dual core 2Gb mem etc running Vista home premium.

When I try to connect from IE7 under Vista, the router resets and terminates all connections. It does eventually connect to the roter login screen if I leave it long enough.

I was hoping the new machine would replace my XP but it is looking increasingl like XP is staying untill 2014!

Read other answers
RELEVANCY SCORE 40.4

I am currently with Virgin Broadband in the UK which supply up to 50Mbps. During non-peak I get 50 Mbps through the ethernet and about 20Mbps on my laptop through a wireless connection to my router which is fine...

The problem is that during peak times, I get a speed of less than 7/8Mbps through my wireless connection which I feel is unfair considering I am paying for up to 50Mbps. (A connection via ethernet only drops by 4-5 Mbps to 45Mbps).

Should this be happening? I don't understand how the increase in demand during peak times should affect my ethernet and wireless connection differently. If anyone has a solution I would be very grateful.
 

A:Wireless broadband v slow during peak hours; ethernet unaffected

Assuming that you run an encrypted wireless connection and changed the login and password for your router, just check how many wireless networks you can see in your connection manager during the peak hours vs normal hours. You may be just suffering from interference from the neighboring networks. In non-peak hours all of those routers around you are just broadcasting their network names, thus taking little bandwidth. In peak hour the information traffic between the routers and computers connected to them picks up and creates interference.

If you see a lot of networks around, get some free software, such as Net Stumbler, that would allow you to see what channels those networks operate on and select an unoccupied (or less occupied) channel in your router.
 

Read other 5 answers