Over 1 million tech questions and answers.

Report for modifications of sensitive groups not available

Q: Report for modifications of sensitive groups not available

Hi everybody,
ATA V. 1.9.7312.32791 - fresh install, no update
Just recently installed Microsoft's ATA. I only use lightweight deployment option for ata gateways on every domain controller available, no other ata gateways in use. So for my understanding I don't need any configuration of event forwarding since the lightweight
gateways are able to read any event locally.

I am not able to get a report about modifications of sensitive groups, it's greyed out. An informational message below it says: "No modifications of sensitive groups were observed, make sure that events forwarding is properly configured."
I changed many things about my sensitive groups for testing purpose btw.
Any hints?
Thanks!

Thanks, regards, tim

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Report for modifications of sensitive groups not available

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 72

Hi,
How could I dump the list of the users/groups who has sensitive privileges. is there any column on the mongodb that I can query
Thank You,
Ali 

Read other answers
RELEVANCY SCORE 71.2

In addition to the default list of sensitive groups, is it possible to configure additional groups as sensitive?
I'd like to get notified if there are any changes to other groups, like Exchange Admins, or ones that have elevated rights in our organization.
This is on ATA 1.8
Thanks,
-jeff

Read other answers
RELEVANCY SCORE 68.8

I am testing sensitive account modification and it isn't working. When I looked at the logs, I see the following event over and over. I am running lightweight gateways, version 1.9.7312.32791. Does the lightweight gateway service need special permissions
to read the event logs? 

2018-05-31 21:51:43.9737 2664 102 Error [EventLogException] System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
   at System.Diagnostics.Eventing.Reader.EventLogException.Throw(Int32 errorCode)
   at System.Diagnostics.Eventing.Reader.NativeWrapper.EvtSubscribe(EventLogHandle session, SafeWaitHandle signalEvent, String path, String query, EventLogHandle bookmark, IntPtr context, IntPtr callback, Int32 flags)
   at System.Diagnostics.Eventing.Reader.EventLogWatcher.StartSubscribing()
   at Microsoft.Tri.Gateway.Collection.Events.EventListeners.WindowsEventLogReader.<UpdateWindowsEventLogReaderBookmarksAsync>b__15_1(KeyValuePair`2 _)
   at MoreLinq.MoreEnumerable.ForEach[T](IEnumerable`1 source, Action`1 action)
   at async Microsoft.Tri.Gateway.Collection.Events.EventListeners.WindowsEventLogReader.UpdateWindowsEventLogReaderBookmarksAsync(?)
   at async Microsoft.Tri.Infrastructure.Framework.Module.<>c__DisplayClass30_0.<RegisterPeriodicTask>b__1(?)
   at async Microsoft.Tri.Infrastructure.Extensions.TaskExtension.<>c__DisplayClass33_0.<RunPe... Read more

Read other answers
RELEVANCY SCORE 60.4

I have a database for a senior center membership. Members are from a number of area towns. I am trying to write a report showing the demographics by town. ie gender, age etc. I have grouped a count of members by town, and now I want break that down by age groups. It would look something like this:
ANYTOWN 50-60 60-70 70+
members = 20 10 5 5

NEXTOWN
members = 10 3 3 4

ETC.

I found a function on line that will compute ages from DOB and assign them to age groups. I use this function in a query that gives me the demographic info I'm looking for, including a column named "AgeGrps" My problem is "How do I get a count of each age group by town in the format shown above?" Any help will be greatly appreciated
 

A:Counting Age Groups in an Access Report

Ron, it may take 2 queries to do this, one to put them in to the age groups and then a second one to Group and count them by Town. Or you could possibly use a Crosstab to do the Grouping and Counting.

Can you post a zipped Access 2000-2003 copy of the Database for us to look at?
 

Read other 1 answers
RELEVANCY SCORE 60

Can anyone tell me how I reduce the line spacing in a group in reports. Any help would be greatly appreciated.
 

A:Access 2007 report formatting in groups

Report Line Spacing is literally controlled by the layout on the Report, so reduce any space between lines and from the "Group Header & Footer".
 

Read other 1 answers
RELEVANCY SCORE 60

I have an access report that I am having trouble formatting. I have a field of 13 characters and I want them grouped by the first 9 characters so that there is a line once the first 9 characters changes.

For example: If the data shows AAA AA AA.AA, then the next line is AAA AA AA.AB, I want there to be a bold line inbetween those rows on the report so it is easier to see when the sections change.

Is there any way to do that?

Thank you!
 

A:Solved: Add formatting to groups in Access report?

Read other 12 answers
RELEVANCY SCORE 49.6

I can sign into my Yahoo groups account but can only see the first page of groups (I belong to about 70 groups). When I click on "View all Groups" I get the following message:
"We're sorry, but we were unable to complete your request at this time.

If you continue to receive this error for more than 48 hours, please contact our Customer Support staff. We apologize for this inconvenience."

I have tried from various workststations(home and at work), made sure cookies were turned on, dropped the firewall, etc. I even went to the lost groups locator utility, no result.

Yahoo tech support does not respond, I have tried many times in the last two months (I got what I paid for).

Any ideas?
 

A:Yahoo groups error can't view all groups

it's Yahoo,

there tech support are disgusting, I had major problems with one of the groups I run and you camn log a call but dont expect an answer !

example of an OXYMORON

TEch Support
and
Customer services
 

Read other 1 answers
RELEVANCY SCORE 44

Just purchased a new computer with the win 7 installed. I believe that this is the bottom version of the OS.
I read that you can increase the capability of the factory version by purchasing a "software key" that improves the OS.
My question is, how much does this cost ,and what other features come with that modification, and is it worth it for someone like me that basically spends most of my computer time on-line read blogs and news.

A:Win 7 modifications ??

If that's all you do with it and your happy, why go to the expense and the hassle,
stick with what you have in my opinion. But if you really want to change have a read here.

http://www.sevenforums.com/general-d...-ultimate.html

Read other 3 answers
RELEVANCY SCORE 43.6

Hi there,

So, i own a pc, a laptop and an xbox 360 and they are all connected to my home network via a router. now, when i have all three of these running at the same time it can cause a great deal of annoyance and confusion when we are all trying to compete for the most amount of bandwidth,

For example, my brother will be playing halo 2 and have msn open and i will be trying to surf the net on my laptop. now my brother will be complaing that he is not getting "host" and spends some of his games in red bar and my internet pages take a few minutes to load.

so i was wondering if there are any programs or freeware out there that i can go and buy so that i can modify it so that i can tell my router to give my xbox (lets say....) 60 percent of my bandwidth while splitting the other 40% between the two computers and then when the xbox is off it diverts the bandwidth to where it is needed most

If there is anything out there that can help me please post a name and/or link and it would be greatly appreciated.

Thank You
 

Read other answers
RELEVANCY SCORE 42.8

Can anyone tell me how to colour in trimmings and borders black and then change the font colour. I want everything black with orange writing. I've seen it and I lik it, I just cant figure out to do it?

Also, when I go to my find new skin page, it is really messy. Lots of bold bright borders and lines and broken lines. Is very hard to read. What have I done?

A:Opera appearance modifications

Also, how do I set up utorrent to download through opera?

Read other 7 answers
RELEVANCY SCORE 42.8

There are Inspiron 5567-2655, 5567-2662, 5567-3195, 5567-3201 and 5567-3546 modifications in stores in my town. It says that they are all with i7 7500U, 8GB memory, 1TB HDD and have Radeon R7 M445. OS for all is Win10 Home. I thought that the difference is in the color, but there are three different laptop body coloring and five modifications.What are the differences between these modifications?

Read other answers
RELEVANCY SCORE 42.8

I just noticed something cool with the new way google does searches, and just thought I would share it.When you click the text (search result summary) below the search result link:Advanced troubleshooting for "Stop 0x0000007B" errors in Windows XP <--------Search Result Link Dec 1, 2007 ... This step-by-step article describes how to troubleshoot "Stop 0x0000007B" error messages in Windows XP. This article describes issues that ...support.microsoft.com/kb/324103 - Cached - Similar <-----Search Result SummaryA preview of the website is generated prior to you actually visiting, so you can see the site before you visit it to see if its something you want to click on.This only works in Firefox from what I have seen.This is what I mean:It works in Internet Explorer 8, but not 7.

A:GOOGLE Search Modifications

Its been on for 2-3 days now. I have Chrome, Firefox and IE8 on my PC and it works on all of them.

Read other 6 answers
RELEVANCY SCORE 42.8

New to XP (media center sp2), not new to Windows OS. Are there any "out of the box" tweaks/modifications that are recommended? Any XP tweak guides? I am not a gamer, don't overclock...just want it stable and lean without all the unecessary background apps running and dont need all the superfluous software.

For example, do many with XP disable system restore? I did with my old OS as I have an external HD withh system backup images. Should I keep the "enable write caching on the disk" checked in the HD setting in the device manager? Is Corel Photo CCentter bundled with any other software? I have many other questions, but willl settle for feedback first.

Also, if anyone has recently purchased a Dell E510 (or other Dell) can you tell me all the trial ware that I can uninstall? I am afraid to get rid of too much because I fear its bundled into other apps that I need. I curse the OEMs for doing this.

Thanks for any advice or links

ERG
 

A:XP Tweaks/Settings//Modifications

I edited my signnature to show my specs. Thx
 

Read other 1 answers
RELEVANCY SCORE 42.8

Can anybody answer the following questions about a laptop power adapter?

Is there a maximum length for the dc cord? In other words why do they locate the adapter 1/2 way down the cord instead of closer to the outlet.

Is the small cylinder around the cord about 3" before it enters the laptop some sort of choke/filter?

Thanks.
 

A:Power adapter modifications

kraftzion said:





Is there a maximum length for the dc cord? In other words why do they locate the adapter 1/2 way down the cord instead of closer to the outlet.Click to expand...

There is no particular reason for this, either side of the power supply could be lengthened or shortened.





kraftzion said:





Is the small cylinder around the cord about 3" before it enters the laptop some sort of choke/filter?Click to expand...

I'm not positive but thats what I have always thought it was.
 

Read other 4 answers
RELEVANCY SCORE 42.8

When you hover over applications open in the taskbar, is there a way of changing the view to "list" the open applications opposed to the default view that shows a picture of each item opened for that application?

A:TaskBar Hover Over Modifications

Hello meppwc, and welcome to Seven Forums.

The tutorial below can help you set to use taskbar list mode instead of taskbar thumbnail previews. Step 1 in Option One would be easiest for this.

Taskbar List or Thumbnail Previews Mode - Change

Read other 1 answers
RELEVANCY SCORE 42.8

while trying to load zone alarm antispyware I keep getting an error that says "you do not have access to make the required system modifications". "Please rerun from an administrators account". I have clicked on "run as administor" and compatibility settings but that install error keeps popping up. other programs install fine.

A:system configuration modifications

Originally Posted by nickoli tessla


while trying to load zone alarm antispyware I keep getting an error that says "you do not have access to make the required system modifications". "Please rerun from an administrators account". I have clicked on "run as administor" and compatibility settings but that install error keeps popping up. other programs install fine.



Nickoli:

Welcome to the Vista Forums

Have you already installed zone alarm and are getting these errors or are you installing zone alarm and getting these errors?

Read other 11 answers
RELEVANCY SCORE 42.8

How can I modify the apps that are started during bootup? I used to use a Windows app but I have forgotten the program name. Can you help?

A:Startup folder modifications

What do you mean by modify?
You can use a program called Autoruns to control what programs start.

https://technet.microsoft.com/en-us/...rnals/bb963902

Read other 1 answers
RELEVANCY SCORE 42.8

Quote:
ipconfig /release
netsh interface ip set address offboard static 111.111.111.111 255.0.0.0
netsh interface ip set address offboard dhcp
ipconfig /renew


Anyone could help me to make this a working file at Windows Seven?
I used it on XP to change my IP until now, but when I try to run now it doesn't work
Obs: Offboard is the name of the connection

A:[Help] Modifications in a batch file

Try this:


Code:

ipconfig /release
netsh interface ip set address "Offboard" static 111.111.111.111 255.0.0.0
netsh interface ip set address "Offboard" dhcp
ipconfig /renew
Of course it might work without the quotation marks, but if the name is Offboard then you'll need it capitalized correctly for it to work, IIRC.

Also, the help info in the command shows some other options as well that you might want ot take a look at - in *particular* if the OS is still *internally* recognizing the connection as "Local Area Connection":


Code:
C:\>netsh interface ip set address -?

Usage: set address [name=]<string>
[[source=]dhcp|static]
[[address=]<IPv4 address>[/<integer>] [[mask=]<IPv4 mask>]
[[gateway=]<IPv4 address>|none [gwmetric=]<integer>]
[[type=]unicast|anycast]
[[subinterface=]<string>]
[[store=]active|persistent]

Parameters:

Tag Value
name - Interface name or index.
source - One of the following values:
dhcp: Enables DHCP for configuring IP addresses for
the specified interface.
static: Disables DHCP for configuring IP addresses for
the specified interface. This value must be
specified if an address or a gateway is being
... Read more

Read other 9 answers
RELEVANCY SCORE 42.8

Hi all, I've been hard at work in modifiying my watercooling unit, I know it is not such a good product, but after modifications it is amazing. Soon I will post some pictures if anyone is interested. Here is a list of what I've done:

1. Drained the system
2. Took it apart
3. Took out all stock fans, replaced with Antec Led Fans
4. Took out the restrictive stock tubing, replaced with Tygon 3/8
5. Ran leak test for 3 hours, at the beginning there was one leak, which I fixed with some tightening of c-clamp.
6. Modified front panel, placed another grill, as well as the back panel
7. Modified knob lightning

After all this, when I replaced the tubing, I immediately noticed that the flow meter was spinning much faster, and this effectively reduced my temperatures about 2-3 Celsius at load. Replacing the fans, with better airflow and quieter fans also brought the temps down 1-2 Celsius, also the use of Danger Den MCT-5 Coolant brought my temperatures down 2-3 Celsius as well.
In the end, I used to get a load temp of about 44 Celsius, now I only get about 37-38 Celsius. Quite pleased with the project and acheivement. If you guys want pictures, or illustrations of how I did this, just ask. I will post them later.
 

A:Kingwin AS-3000 Modifications

We would like to see a photo. Thanks for letting us know.
 

Read other 2 answers
RELEVANCY SCORE 42.8

Hello,

I need to restrict the below items. Preferably through the registry. I would like the restrictions to only affect non-Admin accounts. Is there a way to do this? Thanks for any assistance.

Sam

This is a list of the items I'd like to change/restrict:

Remove the Control Panel, Printer, and Network Setting for the Classic Start Menu
Remove the Control Panel icon
Remove the Printers and Faxes icon
Remove the Help and Support icon
Prevent changes to Explorer?s Advanced registry settings.
Prevent access to the taskbar, command prompt, registry editor.
Prevent access to MMC utilities.
Prevent password changes
Remove CD and DVD burning features
Disable System Tools and other management programs
Internet Explorer
Prevent changes in IE registry settings
Prevent right-click in IE
Prevent printing
Disable AutoComplete
Remove Find Files

Read other answers
RELEVANCY SCORE 42.4

hey,i installed windows blinds,objctdock,objectbar and icon x , and i made some modifications on my windows theme,i made a quick bar and my icons to look cooler.now when i open mozilla firefox there are many pages that goes up and down all the time.i press update but it works only sometimes.so plz can someone help me????

Please use proper thread titles from now on. Thanks.
 

Read other answers
RELEVANCY SCORE 42.4

I guess I'll ask this here as I cannot get through to RT Se7en Lite themselves. I used eicfg removal so I can have my install USB work for any of the versions. When I go to use RT Se7en Lite it asks which version I want to modify. I think the somewhat minor things I want to change will work for all if not most of the versions. Will it actually modify them all or is there any way to select more than one version or do I have to do each individually? Or run the eicfg after I do mods?

Also does anyone know what is with RT Se7en Lite? I sent an email to their support email and I get (several days of) messages that it is not deliverable: 454 4.7.0 TLS not available due to local problem. Their main website will never connect.

Also is there a W7 download available that has all of the updates or at least most of them to start with? I have one referred to from here that has SP1, but it takes tons of updates.

Thanks here.

Read other answers
RELEVANCY SCORE 42.4

[I cannot write or attach anything substantial - I keep getting 'the connection to the server was reset' after copying and pasting the HJT, dds, and GMER files.]

How do I post...?
 

Read other answers
RELEVANCY SCORE 42.4

Hi all, I don't know a lot about computers, so bear with me... I just inherited an HP Pavilion HPE h8-1050 Desktop computer (http://support.hp.com/us-en/document/c02859331).  It came with Windows 7, and I plan on upgrading to Windows 10 before the July 26th "free upgrade" deadline. (although I could be talked out of that, if it matters).   I would, ideally, like to install Realtek Audio Manager to replace the Beats Audio that the machine came with.  From what I've read online, it seems that it may not be possible.  I plan to do some audio recording on this new machine, and I don't really want everything filtering through Beats, with its kooky settings and sound manipulations.   I tried to download the Realtek Audio Driver, but after the install it doesn't show up anywhere (other than Add/Remove Programs, strangely).  It doesn't appear in Control Panel, or Device Manager, or Programs.   The only file that shows up in a computer-wide search is the setup file, which I've run twice.  I certainly don't have the option or access to choose it over Beats.  I have a feeling it's simply not compatible.   So I guess my question is this: Is there a modification I can make to this machine (ie, new sound card?) so that I can install and use Realtek? Or is Beats simply hardwired into the motherboard in such a way that there are no alternatives.   Thanks for reading,Nathan  

A:Possible modifications so that I can install Realtek Audio M...

Hi @nathangregory,Thanks for becoming a member of the HP Support Forums. I understand you have questions about the sound and Windows 10 upgrade. I will be glad to help you. HP does not support this computer on Windows 10.  If you wish to upgrade to Windows 10, Microsoft will installIf you wish to upgrade to Windows 10, Microsoft will install Windows 10 default drivers. Then you can add the Beat software back. Please keep me informed of how things went. If you require further assistance, let me know and I will gladly do all I can to help you.Please let me know if this resolves the issue by marking this post as "Accept as Solution".To simply say thanks, click the Thumbs up below!  Thanks.

Read other 5 answers
RELEVANCY SCORE 42.4

Any one have the trick for moving the "Yes" or "no" in the visio decision lines ??
 

Read other answers
RELEVANCY SCORE 42.4

Let's say I'm in Australia, and I open the British news website bbc.com. Obviously what I'll see isn't exactly what the Brits are seeing (different ads and even different stories - Australian-weighted).
 
OK, so, would there there be a way to open this site from Aust. so I'm seeing exactly what the Brits are seeing?
 
Thanks very much for any responses.

A:Bypassing website modifications for different countries

See this article for a number of suggestions on how you may be able to achieve that.

Read other 2 answers
RELEVANCY SCORE 42.4

Hi all,
 
After running GMER, I am being notified that there are "rootkit modifications" detected. I'm very concerned, and I'd be grateful if someone could help me out in disinfecting my computer. I can attach or copy&paste logs if required.
 
TDSSKiller and MalwareBytes have not detected anything, but it seems that GMER and RogueKiller do.
 
I am very new to malware detection and removal, so I apologise for any incompetencies.
 
Thank you.
 
Edit: I think I posted this topic in the wrong forum, and that it should have been in the Virus and Malweare Removal forum.
 
Moderator Edit: Moved from Windows 8 to a more appropriate forum.
Roger

A:GMER detects rootkit modifications

Hello and welcome to Bleeping Computer! I am HelpBot: an automated program designed to help the Bleeping Computer Staff better assist you! This message contains very important information, so please read through all of it before doing anything.
We apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.
To help Bleeping Computer better assist you please perform the following steps:
*************************************************** In order to continue receiving help at BleepingComputer.com, YOU MUST tell me if you still need help or if your issue has already been resolved on your own or through another resource! To tell me this, please click on the following link and follow the instructions there.CLICK THIS LINK >>> http://www.bleepingcomputer.com/logreply/530827 <<< CLICK THIS LINK
If you no longer need help, then all you needed to do was the previous instructions of telling me so. You can skip the rest of this post. If you do need help please continue with Step 2 below.
***************************************************If you still need help, I would like you to post a Reply to this topic (click the "Add Reply" button in the lower right hand of t... Read more

Read other 2 answers
RELEVANCY SCORE 42.4

Hello there, I am thinking of puchasing an M710 and I had a few questions I am hoping people could answer for me before taking the plunge. In terms of the power supply I belive its quite low wattage, in the low 200's - is it possible to upgrade this at a later date. I may down the line wish to buy a graphics card and I know it will need a better psu. In terms of graphics cards, the power should be the only issue, the case itself is big enough to fit some standard graphics cards. For RAM, how many RAM slots are there? if I get the 8GB option, is that going to be one stick of 8 or 2x4gbs - again if I want to upgrade this, will there be an available slot, or will I have to get rid of the exsisting RAM? I am going to add an SSD, will they automatically load the OS on the SSD as opposed to the standard 500gb hard drive? Thanks a lot in advance  

Read other answers
RELEVANCY SCORE 42

im on win xp sp3, system scanners are cccleaner,nod32 and superanti spyware.

this is what happened.

im browsing though my yahoo mail inbox, saw this spam (subject: unknown)
decided to add the email address to blocked emails. i have to open the email so that i can see the address.
the problem began.

these are my troubleshooting procedures:
1. ran scanners - nothing detected
2. cleaned cookies, history
3. ccleaner registry scan - nothing
4. system restore - still
5. imported a backup reg file

I believe that upon opening the email it modified some of registry keys for the keyboard since i dont see any unrecognized processes in my task manager, at least from the visible list.

it is quite annoying since i use keyboard shortcuts alot like ctrl+arrow keys to navigate on some texts.

also some keys that have been modified is:

insert key = stand bys the PC
pressing - = -0
pressing 1 = `1

any help will be very much appreciated

A:[SOLVED] delete button shuts down PC and other key modifications

Hi people..

as suspected opening the email modified current keyboard mapping.

After hours of digging solutions in the net i found this one:

Restore keyboard mapping - Dev Hardware

reinstallation of the keyboard registry keys for the US layout solved my issue..

my keyboard is running smoothly after the steps given in that thread.

lesson learned: if the spam is in the inbox, move it to spam folder to reduce the risks if you intend to view it.

sorry can't find any edit button on my original post.

I'm tagging this as solved.

Read other 2 answers
RELEVANCY SCORE 42

Hello,

I wonder what the best tool for Windows XP is for viewing recent (preferrably as specified by user) modifications to the registry, including hidden ones if that is possible?

A:Tool for viewing recent modifications to the registry

http://www.nirsoft.net/articles/find_modified_time_registry_key.html

Read other 1 answers
RELEVANCY SCORE 42

Can anyone recommend any good software for logging computer modifications and maintenance? I support my family and friends and sometimes it's hard to keep all all the changes I have done over the years in my lil noggin. Also it would help me log fixes so I could reference if someone else had the same issue I could more easily reference the fix.
 

A:Software recommendation for logging computer modifications

Plenty of free useful utilities here:

http://technet.microsoft.com/en-us/sysinternals/bb545027
 

Read other 2 answers
RELEVANCY SCORE 42

I have disabled the Secure Boot, changed the Boot Priority ordem to USB drive and tried to install the Linux system. It shows a message of successful installation and asks to restart the computer. However, when it restarts, there is a message of Boot error and it asks for a Boot disk or a Boot removable device...I have real somewhere that the Boot should be in Legacy mode, but it on-line shows this option when the CSM option is set to always, however, without giving me access to that...

Read other answers
RELEVANCY SCORE 42

Hi - I'm new here so please be kind.

I have just bought a Packard Bell IMEDIA A3317 - 3G, triple Phenom core, graphics & sound integrated in motherboard, 320G HD, Vista Home basic. No driver discs included, but 2 created from within Vista for a) Vista re-install and b) Apps Drivers

I need to do ASP programming, so tried loading Win 2000 Professional (SP4) onto a new 320G HD. Sadly, the only screen resolution that works is 640/480 . I obviously need win2000 Pro drivers - since this is a standard package computer, one would imagine that they would be available as a block somewhere, but no joy in finding them.

The screen resolution hinders (prevents) setup of internet access, so I can't access Driver Robot over the net (driver robot needs to work on the machine with the problem)

There is a PCI-E slot, but am not sure if that would be a solution.

This must be a problem others have faced somewhere (or am I the only one!!!!! ) Any ideas on where to get a package of drivers? or what else I could do?

Thanks in advance

Tsarina

P.S. I know it isn't the best of machines, but my needs are very simple - just a little ASP development and writing letters.
 

A:Packard Bell IMEDIA A3317 Modifications

Read other 7 answers
RELEVANCY SCORE 42

I am running AdAware/AdWatch on Windows XP with IE6.
AdWatch is showing a continuous attempt to modify the registry. This is what the typical modification attempt log shows:
registry modification detected.

Ad-Watch event log
Root:HKEY_CURRENT USER
Key:software\microsoft\internetexplorer\main
value: search page
data:http://www.microsoft.com/isapi/redir.dll?prd=ie&ar=iesearch
new data:http://www.google.com

Is this connected to MS' Windows Live Page that comes up with the opening of IE6?
Any input or help on what is going will be greatly appreciated. Thank you.
 

A:Ad-Watch showing continuous registry modifications

It looks like you had microsoft live search set as your search engine possibly when you installed a windows live component and then you installed something like google toolbar which wants to change it to google.

Did you approve or deny the change?

OR just turn off adwatch , make the change and turn it back on.
 

Read other 2 answers
RELEVANCY SCORE 42

Hi,

I have been infected 2 days ago and Windows Update didn't work anymore (error code 80246008). So I have cleaned the corrupt files with MicrosoftFixit found on the Web.

Finally, I have got the BITS service working again with the following batch program wich calls himself the "BITS.reg" file :

sc create BITS binpath= "c:\windows\system32\svchost.exe -k netsvcs" start= delayed-auto
regedit /s c:\Users\fab\Desktop\BITS.REG
net start bits
rmdir %windir%\softwaredistribution /s /q
regsvr32 /s wuaueng.dll
regsvr32 /s wuaueng1.dll
regsvr32 /s atl.dll
regsvr32 /s wups.dll
regsvr32 /s wups2.dll
regsvr32 /s wuweb.dll
regsvr32 /s wucltui.dll
net start wuauserv

I execute this bacth file as Administrator and the BITS key appears in registry with Windows Update working fine.

The issue is that the modifications in the registry base is not taken into account for the next startup of Windows 7 : I can't see anymore the BITS key and I have to run this bacth program every time there's a new startup of Windows 7.

Is it a problem of right persmissions on this Key ? Have I got to change the owner as Administrator ?

Here is the file BITS.reg :

------------------------------------------------------------------------------------------------------------------------

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BITS]
"DisplayName"="@%SystemRoot%\\system32\\qmgr.dll,-1000"
"ImagePath"=hex(... Read more

A:Problem for saving modifications of registry in next reboot

Hi, lets get this straight you open regedit and the Bits service is there (as you posted). Then you restart your computer and do not run the .Bat file if you open regedit the bits service is completely missing from the registry? OR is it that Bits is simply not running in services (automatic delayed start)? Is your user name fab?

Read other 1 answers
RELEVANCY SCORE 41.6

Hi guys,

I deactivated some processes in msconfig to improve the startup speed of my computer. I always did some changes, rebooted the computer and looked whether everything is still working. It looked as if everything was working, but then I recognised that there were blue frames around my desktop symbols:

Kostenlos Bilder hochladen | img4web.com

Further I recognised, that Internet Explorer 8 and Microsoft Excel 2003 show massive Display Errors (the main problem is, that images are not displayed properly):

Kostenlos Bilder hochladen | img4web.com

So I decided to re-activate the processes I deactivated before the last re-boot. It didn't change a thing. Then I decided to re-activate all processes, but even this didn't help:

Kostenlos Bilder hochladen | img4web.com

Apart from the changes is msconfig I haven't done any changes in the time when the error first appeared. It seems quite strange to me, that re-activating the processes does not fix the problem.

My operating system is Windows XP Professional SP3.
Unfortunately System recovery was disabled before I did the changes (Yes, I will activate it for future modifications on my system), so I can't simply un-do everything.

I'm really desperate about this problem and really hope, that someone here can help me (otherwise I will re-install Windows, but this seems a bit excessive ;-) ).

Many thanks in advance ! :)
Florian

A:[SOLVED] Display Errors in IE8 and Excel after msconfig modifications

Hello and welcome to the forum

Please try this:

System File checker: sfc/ scanow

**Note: You will need A Windows XP CD for this exercise**
Please insert the Windows XP CD into your CD/DVD drive.
Click Start, then Run
Copy and paste the command below into the text box
sfc /scannow
Click Ok
During the scan you may be asked to Insert the A Windows XP CD, if this happens just click retry and let it do its thing.

Please post back with the results.

Read other 4 answers
RELEVANCY SCORE 41.6

So i am a newbie in computer hardware and i need to modify my desktop to do some heavy gaming (Assassins creed Unity, BF4 etc).
I need to know which graphic card should i install, so as to run these games swiftly.
If there are any other changes other than graphic card, please do tell.
following are my desktop's config :

Processor - AMD A4-6300 AMU
MB - Gigabyte GA F2A55M-S1
4 GB DDR3 RAM
Power unit of 450W
 

A:Required modifications in hardware for purpose of heavy gaming

Read other 8 answers
RELEVANCY SCORE 41.6

Hellllllo !

On my work laptop I have my Administrator account, which I use all the time, and a Guest account that people can use to go on the Internet etc.

What I have not found out how to do yet is to prevent the Guest account users from :

- Installing or removing software
- Changing any setting in control panel (or the shortcuts leading to it, such as "right-click on the Desktop > personalize"
- Changing internet connections (I've caught guests on the neighbor's open network often, even though my WPA2 wireless network is remembered)

What I have found how to do, using permissions:

- Open specific programs (I have gone and edited the permissions on all the .exes files for the programs I wanted to restrict, and it works fine)
- Access partitions or hard drives (Guests only see the path exists, they have no access and no info to the partitions/drives I restricted)

Now, about my problem, what I've tried so far:

- Same as I did to restrict access to partitions/hard drives, using permissions: I tried to modify the permissions of the Guest account to allow only reading and launching apps on C: as a whole. That didn't work though, Windows wouldn't let me change the permissions on the system disc, even as an administrator with UAC off. I tried many combinations of allow/deny and no change is permitted.

So, what can I do ? Right now, there are only a few shortcuts on the Guest account desktop, but I've tested it: using the Start menu or the com... Read more

A:How to prevent Guest account from making modifications to the computer

A guest account DOESN'T have admin rights, just as a standard user. He/she cannot modify registry keys in HKLM so cannot modify system wide settings!

He can change his own font and his own windows sounds. But not install programs.

Read other 5 answers
RELEVANCY SCORE 41.2

Hi, I am connected to the internet using a iinet BOB2 wireless modem and I'm using a Mac OS X at the moment.

When I enter my WPA key to connect to the network the dialog box says incorrect password. There are no issues with the password because I know how to change it and have tried various different versions in an attempt to explore the issue. Intermittently the connection does work however it then drops out again.

When I click the airport icon my network name appears as usual but a duplicate name also appears. I find this quite unusual, and the technical support person from iinet hadn't heard of it, because the name is the same but also has extra characters added to the end including garbled fonts (ie. wingdings). The name also appears and re-appears with different characters each time.

I share a wall with a neighboring university which has an extensive internet network covering a large area. I wonder if this is some kind of interference? or in a more sinister vein some kind of hacking attempt to get me to enter my WPA key?

I also have a Toshiba laptop which I've been using to double check the issues, but it has always had connectivity issues so I'm not sure its reliable. It is also intermittently picking up on this duplicate signal too but sometimes exclusively this and not the 'real' signal. When I try to connect to the 'real' signal it says acquiring network address and then stops and does not connect.

I'm at a loss of w... Read more

A:Duplicate wireless network name appearing but with random changing modifications

Read other 6 answers
RELEVANCY SCORE 39.2

Hi Everyone,

I am getting the below error when i run the drill down report. error is populating for 5-7 seconds then generating the required report.
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404.

Some forums suggested to install the update in report server. but could not resolve the issue.
Cumulative Update 8 for SQL Server 2012 SP2

Read other answers
RELEVANCY SCORE 39.2

Dears,I have designed a database with many reports of certain importance. basically a report in my DB is one of two types; a Daily Report (requires a single criteria which is the date) and the second is a History report. To view or print a report, I have designed a Filter form to fill in with the report criteria and clicking a button to open the report.The first type (Daily R) work fine without problems. The second type (History R)has a problem. In this report, the criteria are two or three because a history report will retrieve data within a period, so I have to input (FromDate) and (ToDate)and may be adding another criteria which is called a company.In all history reports, the report header will accomodate the two input values of date and extract the rest of report items into the reprot detail area.The problem is, the desigened system doesnot respond well as expected. When I load the filter form to fill in criteria for a history report, I have input the FromDate and ToDate and selected the third criteria (if any), then, the reprot opens without data in it.on the other hand, I tried to load the report directly form opening it, inputing criteria, and it has worked fine without probelms.Would someone expect a key reason for this problem or dirtecly can solve this problem?Appreciate youtr support.Thanks in Advance.mhegazy
 

A:Solved: MS Access report load from a form having report criteria

Read other 16 answers
RELEVANCY SCORE 39.2

I just wanted to know if MS removed the system health report feature from performance monitor.
If so how do you start a system health report in Windows 10, it seems to differ from Windows 7
where you can find in advanced tools "Generate a system health report" ? Thanks!

Read other answers
RELEVANCY SCORE 38.8

Hello.

I have a report, with 3 sub-reports in. It collects all the data for a particular SiteID. in Each of the sub-reports, there is a cost value. One for Hardware, one for Mobiles, and one for Phone lines. I have fields at the top of report which reflects the values and totals them up. Works great, except:
When i have a SiteID with one of the subforms being empty; i.e no mobiles on the site it displays fine in the report view, but when i go to print or publish as a pdf it strips out the subform with no value, and throws an error in my calculation. I need the calculation there, which means i need it to stop striping out the subform with no value. I however cannot see how to do this...its just bugging me, its fine inthe report view, just when you send it to print.

Would grateful for some help,

Thanks Mike
 

A:Solved: Access Report removing sub-report when printing etc.

Read other 16 answers
RELEVANCY SCORE 38.8

Display a Report in a Dashboard in Dynamics CRM without report toolbar in CRM

Read other answers
RELEVANCY SCORE 38.8

I'll try and make this concise: BSODs occur even while desktop is not in use. Memory_Management and PFN_LIST_CORRUPT is what I remember seeing.

Also: IE9, IE10 and IE11 all "stop working" randomly. Chrome - ditto. FF32 - ditto.

I've run Memtest86 (10 passes) no errors.

The last BSOD was deliberate insofar as I was running Driver Verifier. I'm not sure if I am posting in the right area since the browser crashes and BSODs may be two separate issues ... ?

Dump files(s) attached. Please let me know if I can provide any additional info and thank you in advance for any help with this.

Attachment 342090

A:BSODs while idle; Driver Verifier report report available

*bUmP* Any wisdom out there please?

Read other 8 answers