Over 1 million tech questions and answers.

M93Z AIO fan noise is terrible ; help please!

Q: M93Z AIO fan noise is terrible ; help please!

We got in office new AIO ThinCenre M93Z. When turning on the PC, there is no noise at all; however after working 2 hours, the noise of fan drives everybody in room crazy. It not so loud, however it sounds like wind around the blocks in autumn and the noise is not at same frequence but always going up and down, depending on speed of fan.We already checked internet for ours, nothing helped. The CPU temperature is about 40 degree celcius. The tool fanspeed cannot detect the fan, in bios we already put to "acoustic" (sounds like a joke for this setting).We would be so happy if anybody could help! For Thinkpads, there are special tools for fan control; however there seems to be nothing for Thinkcenter AIO PCs. If it would be a private PC - no problem to open the case, put better fan inside; however it is new brand new PC from company and we cannot do hardware modifications.

RELEVANCY SCORE 200
Preferred Solution: M93Z AIO fan noise is terrible ; help please!

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: M93Z AIO fan noise is terrible ; help please!

Hi there, I also bought a Lenovo M93z and the fan drives me crazy.It's a privat computer and I've opened it. But there is nothing you can do. I also tried the program Fanspeed. But the same problem. It can't find my moherboard. Throughout the internet I found nothing exept following information:http://support.lenovo.com/en_NZ/research/hints-or-tips/detail.page?DocID=HT081544&rd=news The problem for me, I don't know if I really can use this bios. When I search through the driver update page. I doesn't show me the same bios. I'm using at the moment the version "FEKT80A". Could you please tell me if you could solve the problem? Thank you very much

Read other 9 answers
RELEVANCY SCORE 60.8

like a loud "RMMMMMMM" most likely overheating (PC is on 24/7) so any ideas on how to solve this. (not being turn it off)

Also any ideas on what parts to upgrade/replace to have your PC on 24/7 without it overheating so bad? (i.e. Case fan, new case.. etc etc)
 

A:A terrible noise..

Read other 9 answers
RELEVANCY SCORE 59.6

Hi  I just got my ThinkCentre800z. All is fine except the fan noise! It almost drives me crazy!In BIOS, I already already put to "acoustic", but the noise is still there! Anyone could help me solve this problem?Thanks!

A:ThinkCentre M800z Terrible FAN Noise!!!!!!

Forgive the late reply, did you get this resolved?   If not, can you give me the BIOS version and date, and OS details? 

Read other 9 answers
RELEVANCY SCORE 46.4

Straight Forward, my internet it terrible,
we use sky broadband and we pay for 15mbs or 25mbs, I don't know which one but the speeds I am getting is nowhere near even 15mbs
Please see attached for the internet speedtests...
My room is the furthest in the house and only has one plug in the whole room (I cannot use ethernet because it needs its own socket) which my computer is using
So I have a netgear wireless adapter, nearly all the time my internet is 1.5 ish mb but sometimes it goes basically to 0, the thing which is weird is how my phone
gets 10mbs as you will see in attached but the computer (at this moment in time) it getting nothing, is there any way to increase the speed and I will try anything anyone asks
because I cannot do anything with this internet, even when it is at its best at 1.5..
 

A:Terrible, Terrible Internet Speeds

Not my IP by the way

Read other 6 answers
RELEVANCY SCORE 46.4

I apologize, but you will most likely first notice how long this opening post is. I've dealt with BSOD for quite a while now and I've decided to search for help.. So, I've come to you guys. I've done a lot of research on the problem so I'll throw out some of my ideas.

The Problem:
I can't seem to play semi-graphic intensive video games for no longer than 15 minutes (games such as Counter-strike:source, BF2, Half-life 2 etc). My computer will freeze momentarily, go black, and then proceed to the Blue screen. It used to be that I would recieve an "IRQ not less than or equal" error, but now my BSOD crashes remain just blue, no error codes, 'nuttin'. Now, when I play less intensive graphic games such as regular Counter-strike 1.6, I can go for a few hours before it crashes.


Some Ideas
Heat
Because my computer seems to do a bit better on less graphic intense games, I'm wondering whether it may be a heat issue. More stress = more heat = less time till BSOD? I'm not sure, I'm not a computer guru, but I know a little.
Here are my temps: CPU 51C/123F (55-57C under stress)
MB 34C/93F


Voltage/Power
I did some research, and I learned maybe that power could play a part in problems with BSOD? My PS is one that came with my computer case and I believe it is 350w. It's not the greatest in the world. Idk if i could be gettin too little power and the games may cause it to crash.
He... Read more

A:The terrible terrible BSOD... help appreciated

Hi Ben,

Take a look on the side of your power supply and tell us the brand name, wattage, and how many amps on each rail. That should help because you have some things on your power supply that don't seem quite correct.

Also, just for kicks, download this free program and tell us the temps, the voltages, and the fan speeds. That should help:

SensorView Pro

http://www.stvsoft.com/download.php?id=122

Read other 7 answers
RELEVANCY SCORE 46.4

Okay so yesterday I downloaded something, it turned out to be fake. But that wasn't all I logged into my runescape account and somehow they manually turned off my computer and went on my account and stole everything, but that's not the problem.

I had Microsoft Security Essentials and it didn't do anything. I got alot of help after that, people told me I had a rat and they told me to download malwarebytes and AVG. I did that, it said I removed everything but I'm not so sure. How can I be SURE that everything is gone?

A:Need help removing this terrible, terrible thing.

Hello,I think we should look at a log or two. Reboot into Safe Mode with Networking How to enter safe mode(XP/Vista)Using the F8 MethodRestart your computer. When the machine first starts again it will generally list some equipment that is installed in your machine, amount of memory, hard drives installed etc. At this point you should gently tap the F8 key repeatedly until you are presented with a Windows XP Advanced Options menu. Select the option for Safe Mode with Networking using the arrow keys. Then press enter on your keyboard to boot into Safe Mode. >>>> Download this file and doubleclick on it to run it. Allow the information to be merged with the registry.RKill....Download and Run RKillPlease download RKill by Grinler from one of the 4 links below and save it to your desktop.

Link 1
Link 2
Link 3
Link 4

Before we begin, you should disable your anti-malware softwares you have installed so they do not interfere RKill running as some anti-malware softwares detect RKill as malicious. Please refer to this page if you are not sure how.
Double-click on Rkill on your desktop to run it. (If you are using Windows Vista, please right-click on it and select Run As Administrator)
A black screen will appear and then disappear. Please do not worry, that is normal. This means that the tool has been successfully executed.
If nothing happens or if the tool does not run, please let me know in your next replyDo not reboot your computer after running rki... Read more

Read other 1 answers
RELEVANCY SCORE 44.4

I am currently trying to PXE boot an M93z, however I get the error "NBP is too large to fit in free base memory". In BIOS, Boot Mode is set to Auto, while Boot Priority is set to UEFI First - which is the working configuration on a number of other Lenovo computers.What is the cause of this issue, and how do I solve it?

Read other answers
RELEVANCY SCORE 44.4

Hi group!Little trouble here. We are trying to enable VT-x technology on our M93z AIO and can't seem to get a straight answer. Is this even possible? We've tried every possible BIOS update. Nothing appears to be working. Maybe someone here can help. Thank you!

A:ThinkCentre M93z and VT-x

Sorry and we may have forgotten to mention we are using Windows 7 enterprise.

Read other 1 answers
RELEVANCY SCORE 44.4

HiI am testing BIOS update during a Task Sequence using SCCM and I need an older BIOS version in order to test.But I cannot find it under "BIOS" on the support page:http://pcsupport.lenovo.com/dk/da/products/DESKTOPS-AND-ALL-IN-ONES/THINKCENTRE-M-SERIES-DESKTOPS/TH... Could you provide a link for older BIOS versions?Thanks in advance. 

Read other answers
RELEVANCY SCORE 44

I'm trying to find out if I can get a digital surround sound output from my M93z. As far as I can tell there is only one digital audio output native on this PC - the DisplayPort audio connection.  This shows up as Intel HD Audio in the driver list.  I am running Windows 10 x64 and have updated all of the drivers and utilites from Lenovo using their tools. I have had my DisplayPort connected to my TV through the Lenovo supplied DisplayPort to HDMI dongle.  I recently purchased an HDMI audio extractor, one with a switch where you can have it request the PC to provide it with 5.1 audio output.  Even with the TV disconnected from the audio extractor the PC sees the audio extractor device, so this should eliminate the TV from the setup. I know that the PC will only output the audio format that it has to play from a particular program.  However, when I go to Playback Devices and check the properties of that audio connection it states that the maximum supported channels is 2.  I would expect that if everything is being detected correctly that it would state 6 or 5.1 or something like that. (Yes, I realize there are other options to try and get this to work.  Before anyone suggests to purchase a USB sound card please try to answer my question below or help solve my problem.  Changing to a USB sound card is not what I'm asking about here.) So my question becomes: Does the Intel HD Audio device that is built into the M93z... Read more

Read other answers
RELEVANCY SCORE 44

I have Lenovo ThinkCentre m93z All-in-One desktop in for work, and I have my own laptop I bring it with me some time.I connect my laptop to work's desktop using VGA cable and press the little button in the side of screen to view  the laptop in bigger screen to do very private work sometimes.
 
My question is: Is it possable for anyone (IT admin, hacker or whoever...) who able access to work's desktop, can he/she views my laptop screen?
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity and moved post to the correct forum.
 

Read other answers
RELEVANCY SCORE 44

Would any significant problems be expected if I was to try to run my M93Z off of a modified sine wave inverter? I know that pure sine wave inverters are recommended, but it also sounds like a lot of desktop computers have components that monitor and smooth out the power input anyhow. I don't intend to use anything too heavy like video games, just a lot of Excel. Any thought woukd be greatly appreciated - thanks in advance!

Read other answers
RELEVANCY SCORE 44

I have a older model M93Z and i am in my office with my wife on her HP touch screen desktop , our internet goes out and she says we can use the neighbors and she logs onmto his wifi with the password , and i go to my avaiable wifi networks and it does not even show up on my  Lenovo  are there settings i am missing or is my wifi adapter just weak   please help me understand this

Read other answers
RELEVANCY SCORE 43.6

Buen día a todos Le monté una imagen de win7 pero al reiniciar el equipo se queda en el logo y no arranca pero si le desconecto el teclado funciona bien lo vuelvo a conectar y trabaja perfecto ya lo cambie de puerto usb y cambie el teclado pero sigue igual que puedo hacer gracias por su ayuda 

Read other answers
RELEVANCY SCORE 43.6

Running Win10 Pro 1709, the FEKT9DA update for the M93z slowed my system way down.I reverted the BIOS, things sped up again...I applied Microsoft's microcode update from https://support.microsoft.com/en-us/help/4090007/intel-microcode-updatesand I didn't lose speed (at least in my usage) and I am now fully protected.Just an FYI for anyone who has these machines.

Read other answers
RELEVANCY SCORE 43.6

I am looking for a ACPI\LEN4001 driver for M93Z All in one system. Found this page: http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?DocID=HT071645Does nto help.Tried this driver: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029250Does not work.Why Lenevo would not offer SCCM package for the latest All In One model??????? Thanks for the help.













Solved!

Go to Solution.

A:M93z All In One ACPI\LEN4001 Driver

Can anyone from Lenovo respond to this question?  

Read other 9 answers
RELEVANCY SCORE 43.6

So it is an all-in-one, so that is already 1 monitor. On top of that I would like to add 2 more 27" monitors, making a total of 3. Is that possible? I tried it, but it doesn't recognize the 3rd. I think it might be the outlets that are screwy. The VGA doesn't seem to work well.

Read other answers
RELEVANCY SCORE 43.6

After I installed a msata ssd(intel 525) on my machine,the machine does not recognize the ssd(also in the BIOS).Does M93z not support msata ssd?i touch it is hot.

Read other answers
RELEVANCY SCORE 43.6

Every now and then, the screen for my M93Z will become very fuzzy and the colours will skew towards green(ish). Sometimes, temporarily shutting off the screen fixes the issue, sometimes even switching between programs helps (if say one program was a full screen isntance and then the screen goes completely black while switching). Any idea how I can solve this? I am wondering if it's an overheating issue, a graphics issue, or a driver issue... Next time it happens I will take a picture and try to upload it on to here... I tried to screen shot it when it happened but the screenshot picture looks normal :/

Read other answers
RELEVANCY SCORE 43.6

So I just opened the back and sprayed a 4oz can of compressed air on the fan and areas around the fan. It did work somewhat. It is now quitter but still not enough.  Do I have to unscrew parts inside and dust beneath them?

Read other answers
RELEVANCY SCORE 43.2

Hello experts and fellow Windows 8 users,

I am running the Windows 8 OS and currently having terrible mouse lag. My mouse will run fine for about 20 seconds-ish and then stall for a good 1-2 seconds. This can be incredibly annoying, especially when I am in my gaming mode (sc2 shout out). Any idea as to how to fix this? I use duel monitors and have tried reverting back to one, didn't fix anything, all drivers are up to date, and I have also searched the internet for numerous answers. None seem to work so far.

Mouse specs:
Wireless USB mouse, Logitech LAZER. I know it is for fact not the batteries as I have replaced them 2x to see if that was the case, and also, buying a new mouse did not resolve my problem.

Any and all help is appreciated and thank you good people for helping out!

PS: How common is this problem w/ w8, im hearing other people have similar problems?

Read other answers
RELEVANCY SCORE 42.8

We recently purchased 5 ThinkCentre M93z's to complement the 100+ E93z's that we currenlty use in our school district cafeterias. These computers have Windows 7 OS and the only other software we install is Meals Plus software to track students and food purchases. These computers have a Genovation Mini-Terminal model 905-S version 7.20 keypad attached that can either scan a student's ID  card or they can punch in their student ID number to purchase their meals and we install the latest driver for that device. With all 5 of the M93z's we purchased the computers will hang at the Lenovo splash screen (most common) or hang at the Windows Startup screen at the point when you first start to see the colored balls appear. It will stay stuck at this point until you unplug the keypad at which point it will finish booting up.  At point you can plug the device in and use it but once you restart it it will hang up again.  This happened no matter which USB port you use (two on the side or the four on the back). We have never had any issue with the E93z computers. 
 
I have updated the bios. I have removed and reinstalled the lastest USB drivers for this computer.  The bios is set to start up from the hard drive. USB is not one of the startup options.
 
It conistently does this with all 5 of our M93z's.
 
Any suggestions?
 
Thanks for any help you can provide.
 
 
Mod:   edited Subject line to clar... Read more

A:M93z: hanging at startup with USB Keypad (Genovati...

I've had the ThinkCentre M93 since July 2014. I run it constantly and have only shut it down a dozen times. When I first went to restart the computer, it only got as far as the Lenovo splash page. It would freeze, I would hold the power-on button for seven seconds, it would shut down. Doing this three or four times, and finally it would start windows and I could use the pc again. Suffice it to say, because of this problem, I rarely turn off the machine.A couple of times I used the OS Recovery Disc that I got with the pc purchase. It has helped a few times.But I feel like there is no true solution yet. Everything I try that works is really just luck. Anyone else having this issue? And found a solution yet? Thanks.

Read other 2 answers
RELEVANCY SCORE 42.8

We recently purchased 5 ThinkCentre M93z's to complement the 100+ E93z's that we currenlty use in our school district cafeterias. These computers have Windows 7 OS and the only other software we install is Meals Plus software to track students and food purchases. These computers have a Genovation Mini-Terminal model 905-S version 7.20 keypad attached that can either scan a student's ID  card or they can punch in their student ID number to purchase their meals and we install the latest driver for that device. With all 5 of the M93z's we purchased the computers will hang at the Lenovo splash screen (most common) or hang at the Windows Startup screen at the point when you first start to see the colored balls appear. It will stay stuck at this point until you unplug the keypad at which point it will finish booting up.  At point you can plug the device in and use it but once you restart it it will hang up again.  This happened no matter which USB port you use (two on the side or the four on the back). We have never had any issue with the E93z computers. 
 
I have updated the bios. I have removed and reinstalled the lastest USB drivers for this computer.  The bios is set to start up from the hard drive. USB is not one of the startup options.
 
It conistently does this with all 5 of our M93z's.
 
Any suggestions?
 
Thanks for any help you can provide.
 
 
Mod:   edited Subject line to clar... Read more

A:M93z: hanging at startup with USB Keypad plugged i...

I've had the ThinkCentre M93 since July 2014. I run it constantly and have only shut it down a dozen times. When I first went to restart the computer, it only got as far as the Lenovo splash page. It would freeze, I would hold the power-on button for seven seconds, it would shut down. Doing this three or four times, and finally it would start windows and I could use the pc again. Suffice it to say, because of this problem, I rarely turn off the machine.A couple of times I used the OS Recovery Disc that I got with the pc purchase. It has helped a few times.But I feel like there is no true solution yet. Everything I try that works is really just luck. Anyone else having this issue? And found a solution yet? Thanks.

Read other 2 answers
RELEVANCY SCORE 42.8

Working with an M93Z (model 10AF), currently on Win7. Started the Win10 upgrade but the installer said Intel HD Graphics 4600 won't work. Yet I see Win10 drivers for that card on both the Intel and Lenovo sites. Why is it throwing this warning?  Thanks, Mark

Read other answers
RELEVANCY SCORE 42.8

Is there a 300M dual band card, RTL to fit AIO M93Z? Where I can find the info?

Read other answers
RELEVANCY SCORE 42.8

We recently purchased 5 ThinkCentre M93z's to complement the 100+ E93z's that we currenlty use in our school district cafeterias. These computers have Windows 7 OS and the only other software we install is Meals Plus software to track students and food purchases. These computers have a Genovation Mini-Terminal model 905-S version 7.20 keypad attached that can either scan a student's ID  card or they can punch in their student ID number to purchase their meals and we install the latest driver for that device. With all 5 of the M93z's we purchased the computers will hang at the Lenovo splash screen (most common) or hang at the Windows Startup screen at the point when you first start to see the colored balls appear. It will stay stuck at this point until you unplug the keypad at which point it will finish booting up.  At point you can plug the device in and use it but once you restart it it will hang up again.  This happened no matter which USB port you use (two on the side or the four on the back). We have never had any issue with the E93z computers.  I have updated the bios. I have removed and reinstalled the lastest USB drivers for this computer.  The bios is set to start up from the hard drive. USB is not one of the startup options. It conistently does this with all 5 of our M93z's. Any suggestions? Thanks for any help you can provide.  

A:ThinkCentre M93z hanging at startup with USB Keypa...

I've had the ThinkCentre M93 since July 2014. I run it constantly and have only shut it down a dozen times. When I first went to restart the computer, it only got as far as the Lenovo splash page. It would freeze, I would hold the power-on button for seven seconds, it would shut down. Doing this three or four times, and finally it would start windows and I could use the pc again. Suffice it to say, because of this problem, I rarely turn off the machine.A couple of times I used the OS Recovery Disc that I got with the pc purchase. It has helped a few times.But I feel like there is no true solution yet. Everything I try that works is really just luck. Anyone else having this issue? And found a solution yet? Thanks.

Read other 1 answers
RELEVANCY SCORE 42.8

I have Dell 27" U2713H as 2nd monitor; I need to turn on/off Dell monitor power switch to bring it up from sleep mode. Any clue how to fix this? I tried differenet Displayport -> HDMI cables already.

Read other answers
RELEVANCY SCORE 42.4

Brand new AIO, touch screen worked great under Windows 8.  Stopped working after upgrade to 8.1.  Lenovo phone support of no help.  They say, "Reinstall Windows and delete all your data and don't upgrade to 8.1!!!"  LOL, really?  When my customer said no, they said, we will send a tech out to "REPLACE the SCREEN!!!"  LOL  Wow!! Problems I've found that keep reverting are:1 - Services, "Touch Keyboard and Handwriting Panel Service" keeps reverting back to "Manual" startup and "not running" after reboots.  (after I've changed it to "automatic" )2 - Registry show "HKLM\System\CurrentControlSet\Services\TabletInputServices" Start key keeps reverting back to 3 (manual) after I changed it to 2 (automatic)3 - Under Device Manager, Many hidden Human Interface devices are grayed out as not connected.4 - Customer is not happy and Synnex is out of stock and can't replace it promptly.  This is really looking bad for Lenovo.  Their phone support hasn't a clue how to fix this problem! Anyone else have this problem?  Anyone actually succcessfully fixed this problem? type: 10ACModel: 0011US Thanks!

A:M93z AIO Touch screen stopped working after 8.1 upgrade

Have had same issue after update of Win 10 - did you find a solution?

Read other 1 answers
RELEVANCY SCORE 42

After a Win 10 update my hid compliant touch screen driver is missing from device manager and getting an error 45 not connected when it was there. Now I can't find it in hidden or visible Human Interface Devices at all. Lenovo update and Windows scan can't find it or update it and say I have all the drivers but I clearly don't. Where do I download it and get the Touch interface and functionality back? I've tried many things but no system restore won't even get me back there...

Read other answers
RELEVANCY SCORE 41.6

Hi all, We are having issues applying Thinkcentre M93z BIOS update.  The update itself completes successfully but the following reboot produces the error: "Error 0162 - Setup data integrity check failure"?Press F1 to enter Setup, F2 to resume? At this point it doesn?t matter how many times you press F2 you always receive the same error during POST.  The workaround has been to enter the BIOS and press F9 then F10 to save and exit.  Once this has been done the machine boots without displaying the 0162 error.  If we were manually walking around updating the BIOS on each machine it would be less of an issue but since we are carrying out the BIOS updates via SCCM, visiting each machine is not an option.  It doesn?t matter if you apply the BIOS manually or via SCCM, you see the same error.  For reference we are updating to the latest BIOS revision: FEKT50AUS. Any ideas? Many thanks

Read other answers
RELEVANCY SCORE 38.4

I sure hope you guys can help. I'm on travel for work and this computer is driving me nuts. I would just format but all my CDs are at home.The computer is making the clicking noises like when using internet explorer - click on a link and it makes a noise - its doing this a lot. It also randomly plays music for a few seconds at almost max volume. Everything else seems to be working OK, just slow internet but I think that has to do with the hotel internet being slow.What I have done so far:1. Full scan with Symantec Endpoint (updated of course), nothing found.2. Spybot full scan: found a few things but still making noises3. Malwarebytes full scan: found a few more things but still making noises.4. Ran Combo Fix on advice from a friend and THEN found this site.- ((((((((((((((((((((((((((((((((((((((( Other Deletions )))))))))))))))))))))))))))))))))))))))))))))))))c:\documents and settings\Joe\Application Data\inst.exec:\windows\system32\st326159.dllMBR is infected with the Whistler Bootkit !!-BTW, I tried to run GMER and it shut down my computer mid scan.DDS (Ver_10-03-17.01) - NTFSx86 Run by Joe at 4:34:04.84 on Fri 07/30/2010Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_17Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.3572.2542 [GMT -4:00]AV: Symantec Endpoint Protection *On-access scanning enabled* (Updated) {FB06448E-52B8-493A-90F3-E43226D3305C}FW: Symantec Endpoint Protection *enabled* ... Read more

A:Random clicking noise, blip noise and music

Good evening. Please download MBRCheck.exe by a_d_13 from here and save it to your Desktop. Double click the file to begin the scan. A Command Window will open and after the scan has completed you will be prompted to press <ENTER> to exit. A text file called MBRCheck_date/time.txt can be found on the Desktop. I'd like you to post the contents in your next reply.~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Download Preformat.zip from here and save it to your Desktop. You will need to extract the file.Right click on the zipped folder and from the menu that appears, click on Extract All...In the 'Extraction Wizard' window that opens, click on Next> and in the next window that appears, click on Next> again. In the final window, click on FinishYou should now see a folder with a .vbs file in it. Double click Preformat.vbs to run it and a text file called Preformat.txt should be created in the same folder - either that or you'll get an error message.Please copy and paste the contents of the text file into your next reply and then you can delete both of the folders and their contents.

Read other 3 answers
RELEVANCY SCORE 38.4

Hi,  I just bought Envy x360 2-in-1 15.6" Touch-Screen Laptop - Intel Core i7 - 16GB Memory and I found it is making noise even if I am not doing anything.  I completed my account setup and install chrome and started using the laptop; the noise is continuouly coming up- not sure cooling fan or HD noise.  I am thinking to replace it (might be defective) or return it.  Please advice if anyone has any experience with this model.  

Read other answers
RELEVANCY SCORE 38

I'll skip all the backstory and cut to the chase.  Have formatted my hard drive.  I have a Windows 10 USB installer and a DVD installer.  I can boot both of the installers but once Windows Setup loads the keyboard and mouse immediately stop working.  From what I've read Windows 10 has built-in USB 3 drivers - which seems like it is working since Windows Setup is running from the USB thumb drive.  I just can't click Next to proceed with setup since the keyboard deactivated (no Num Lock or Caps Lock).  Keyboard works just fine in BIOS. I don't think Setup is not locking up.  The reason I am at this point is because the keyboard and mouse stopped working in my 8.1 install.  (I could remote control using my remote app, but no local keyboard and mouse).  Was able to upgrade to 10 which worked but still no keyboard and mouse.   Tried different ports and different keyboards. The BIOS does not have a way to disable xHCI on the USB that I could find. Any ideas?

Read other answers
RELEVANCY SCORE 37.6

Hi,Since last week, there's a static noise from my laptop's speakers, on playing music. But when I'm on earphones, there's no static noise. The static noise is a bit too much, when songs with humming sounds play.My laptop is 10 months old and all my drivers are upto date. The problem persists at both times, when the laptop's plugged in and when it's on battery. Please help me as soon as possible.... : (











Solved!
View Solution.

A:Static noise from the speakers and crackling noise from the ...

Hi @Tardis40... thank you for your help...Well, the link was of no use.... The last option left is recovery, which i do not want to resort to....Today, i noticed crackling sound in my earphones...So, now my problem is,Static noise in the speakers and crackling noise in the earphones...I am in a very disturbed state, and don't know what to do... Please help me asap...

Read other 3 answers
RELEVANCY SCORE 34.8

I am having trouble with my windows and the 3 questions that I need answering are as follows.

1. When i try to open my C drive it tells me it cant find the script file sowar.vbs.

2. When I push ctrl, alt, del my task manager is greyed out.

Is there anyone who can help me?

A:Terrible two

1: http://www.bleepingcomputer.com/forums/t/153949/sowarvbs/2: I read this online, It could be your group policy settings. Try this:Start > Run, Type "gpedit.msc", then go User Configuration > Administrative Templates > System > Ctrl + Alt + Del Options. Set Remove Task Manager to Disabled

Read other 2 answers
RELEVANCY SCORE 34.8

hi, for a while now i've been having a big problem with pop-ups. they appear one after the other as i close them and sometimes after having to close so many of them it causes my aol to just kick me off. i've also noticed that several times a screen pops up letting me know that something is being downloaded and i cant cancel it.

what can i do to get rid of all these annoying pop-ups???
 

A:Terrible Pop-Ups

If you have Hijack This go ahead and post a log. If not download it from the link below to the desktop. Click on the icon and let it automatically install itself to the C:\Program Files folder. Open it up then run a scan and save a log.

Hijack This:
http://www.thespykiller.co.uk/files/HJTsetup.exe
 

Read other 3 answers
RELEVANCY SCORE 34.8

So, I'm the kinda guy thats good at alot of things on the computer, EXCEPT internet things.
I'm fairly worthless when it comes to that. But i have a question, my family and I share a wireless DSL network through an Apple Airport Extreme router, and then it connects to the little Apple receiver box which then is wired up to my computer. My computer has an Intel Pro/1000 MT network connection.
I was wondering, are these two a good match up? because my internet right now, is HORRIBLE. Sometimes it's even worse than dial up (56k steaming videos are choppy and slow download). So i was wondering if there is anything i can do to fix this.
Thanks!
 

A:Terrible DSL....

Clean your computer, get rid of those unwanted files and programs.
 

Read other 3 answers
RELEVANCY SCORE 34.8

First, thank you to anyone who can help at this point, as all homegrown efforts have been exhausted and have only seemed to make things worse. I fear that my PC has contracted some sort of downloading virus that allows things to implant themselves onto my computer's c: drive and run their devastating courses. I have downloaded and run McAfee, Ewido, Ad Aware and other spyware/adware/malware programs that I think helped track down some of the resulting issues, but none have identified the original problem. My searches have led me down several threads that lead me to believe that more than one thing is plaguing me. Attached is my HiJack This log: Logfile of HijackThis v1.99.1 Scan saved at 6:24:32 PM, on 5/23/2006 Platform: Windows XP SP2 (WinNT 5.01.2600) MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180) Running processes: C:\WINDOWS\System32\smss.exe C:\WINDOWS\system32\winlogon.exe C:\WINDOWS\system32\services.exe C:\WINDOWS\system32\lsass.exe C:\WINDOWS\system32\svchost.exe C:\WINDOWS\System32\svchost.exe C:\WINDOWS\system32\spoolsv.exe C:\WINDOWS\Explorer.EXE C:\Program Files\Java\j2re1.4.2_03\bin\jusched.exe C:\Program Files\Analog Devices\SoundMAX\SMax4PNP.exe C:\Program Files\Intel\Modem Event Monitor\IntelMEM.exe C:\Program Files\Dell\Media Experience\PCMService.exe... Read more

A:Something Terrible

Hello rpateltucson,Welcome to Bleeping Computer You've got quite a mess here, and it will be a challenge, but we'll come out on top! Before beginning, you may want to save these instructions to Notepad or print them out for easier reference.Please download Brute Force Uninstaller.Unzip it to it?s own folder (c:\BFU)RIGHT-CLICK HERE and choose "Save As" (in IE it's "Save Target As") in order to download Alcra Remover. Save it in the folder you made earlier (c:\BFU).Open My Computer and navigate to the c:\BFU folder. Start the Brute Force Uninstaller by doubleclicking BFU.exeIn the scriptline to execute field copy and paste c:\bfu\alcanshorty.bfuPress execute and let it do it?s job.Wait for the complete script execution box to pop up and press OK.Press exit to terminate the BFU program.Please enable viewing of hidden files as follows:1) Go to My Computer, and click on the "Tools" menu2) Click "Folder options"3) Select the "View" tab4) Make sure "Show hidden files and folders" is selected5) Make sure "Hide extensions for known file types" is unchecked6) Make sure "Hide protected operating system files (recommended)" is uncheckedRestart your computer, and tap the F8 key on your keyboard. If you begin tapping the F8 key too soon, some computers display a "keyboard error" message. To resolve this, restart the computer and try again. Using the arrow keys on the... Read more

Read other 5 answers
RELEVANCY SCORE 34.8

So I recently upgraded my build to a 150 gig raptor hard drive and a EVGA 8800 GT 512 mb super clocked edition video card. My motherboard is a Asus M2N32-Sli premium vista edition, my CPU is an AMD dual core 5200 athlon 64 x2 clocked at 2.6 ghz. I have 2 gigs of ram and i believe it is DDR2 800. But my question is, when I play a game I get terrible Frames per second. For example, when I play WoW I should be getting more than 60 fps but instead i get half of that. Any type of help would be appreciated, so that i don't spend any more money to play certain games.
 

A:Getting terrible FPS

it would be good if u could put the rest of u're system specs up so we know what u have. the video card is definitely needed.
 

Read other 3 answers
RELEVANCY SCORE 34.8

Okay, so I've been having problems with my FPS in games even as old as Half-Life 2/Garry's Mod. I've gone through every troubleshooting step possible with my video card, and nothing seems to be wrong with it. I have almost no background applications running (under my username). I even had my friend bring over his video card (which is the same model, and works fine for him) to test it out and I didn't have any increase in FPS with his either. I was going to get around to reformatting my hdd and doing a clean install of Windows 7, and now I think I'll do it even sooner, now that this is happening. I have asked a few friends, and they have no clue what is going on. Some are even very experienced with hardware. Short of taking my rig to my local PC store to get diagnostics run for $80, I don't know what to do.

DxDiag is attached.

Please help
 

A:Terrible FPS

Read other 16 answers
RELEVANCY SCORE 34.8

hello all, im a first time poster on this forum, and i have a major problem. I have been getting pop ups for the last month now, and they are eaisley the most annoying thing i have ever come across. I have installed several free programs, none of which have worked. If anyone has any solution please help, if not, i guess i need to look into "wiping" my computer, eh?

A:terrible pop ups

Look over the First Steps at Removing Malware , then post whatever logs you get from that process in the Security Center

Read other 3 answers
RELEVANCY SCORE 34.4

Could not open programs on my computer. Word program and many of the others disappeared. Internet explorer disappeared. Could only get on internet through Google Chrome. Could not use ComboFiX it kept stalling. Had to do a force shutdown. Now I can't get to my desktop. I keep getting the black screen that says safe mode, safe mode with networking, start windows normally, etc. When I click one of them it goes to a faint Window screen, then Dell screen then the black screen over and over again until I force it to shut down. I can't boot from a CD disk or USB stick I made on another computer after going to F2 and F12 to change which disk to boot from. It said invalid disk and the USB stick won't open the files I need. These were the instructions I got from another computer help site. Still not working.  Help
 
Shar907

A:Terrible Infection

I will be reporting this topic to staff who deal with unbootable computers. Someone will be with you soon.

Read other 43 answers
RELEVANCY SCORE 34.4

Hello, and thank you for taking the time to read my post.

Basically this battle with my computer started after i installed my new DVD burner and reformatted. I wanted to reformat because i felt my computer could use a good cleaning. When i installed my Dvd Burner i set the jumpers wrong, and my comp freaked, and for about an hour it wouldnt post, and thru the onboard sound, it was saying system failed cpu test. Now, i just uplugged everything and let it sit for about 45 mins, and it was working fine (remeber this was before the format.) After i got everything settled with that, i began to reformat, doing it the windows "long" way but i kept my music and such backed up on a seperate partition. After i formatted, i imediatly installed sp2, and updated and restarted my comp until it was done. I then installed all the necessary software for anti virus and anti spyware.

After all that i installed css, bf2, and need for speed most wanted. Before the reformat i was getting 120fps+ in cs, 80+ in bf2, and about 80-100 in nfs. That is with all settings maxed and AA 2x and AF 4x. Now, i get 40-60 in cs, 30-60 in nfs, and 20-40 in bf2. Now those arent entirely "unplayable" i know, but after having it run silk for 9 months...its a huge change for me, plus i KNOW my hardware should be able to handle it. Here's my system setup...

Thermaltake Tsunami Case
Antec trueblue 480watt psu (rails are plenty good)
Amd 64 3500+ s939 winchester
Asus A8V deluxe
1gb (512x2) du... Read more

A:Terrible fps in all games. *please help*

Read other 8 answers
RELEVANCY SCORE 34.4

Just now I got a virus which does not allow me to open most programs, run the task manager, has installed some sort of anti-virus software that asks me to buy a registration code, and gives me the the blue screen of death after about five minutes of running windows. Any advice would be greatly appreciated and please don't tell me to reinstall windows as I have an endless amount of files that need to be maintained and nowhere else to put them....

A:Terrible Virus - Can't Do Anything...

Hello and welcome to Bleeping Computer!Please subscribe to your topic so that you will be notified as soon as I post a reply, instead of you having to check the topic all of the time. This will allow you to get an email notification when I reply.To subscribe, go to your topic, and at the top right hand corner by your first post, click the Options button and then click Track this topic. The bullet the immediate notification bubble. Then press submit.Lets try to boot into Safe Mode to run some scansBUT First, Please download Malwarebytes' Anti-Malware from here:MalwarebytesPlease rename the file BEFORE downloading to zztoy.exe instead of mbam-setup.exeDownload this file to your DESKTOP.FROM THEREDouble Click mbam-setup.exe to install the application.* Make sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.* If an update is found, it will download and install the latest version.To Boot into Safe Mode:Reboot your computer in "Safe Mode" using the F8 method. To do this, restart your computer and after hearing your computer beep once during startup (but before the Windows icon appears) press the F8 key repeatedly. A menu will appear with several options. Use the arrow keys to navigate and select the option to run Windows in "Safe Mode".Once you are into Safe Mode*Open Malwarebytes, by going to the Start Menu -> All Programs ->Malwarebytes Anti-Malware* Once the prog... Read more

Read other 1 answers
RELEVANCY SCORE 34.4