Over 1 million tech questions and answers.

BSOD after sleep mode, error DRIVER POWER STATE FAILURE 0x0000009f

Q: BSOD after sleep mode, error DRIVER POWER STATE FAILURE 0x0000009f

Hello all

This is my first post in here. Please bear over with my English – it is not my native language.

My problem is on a Media Centre machine where I recently upgraded Motherboard and processor. I have the following setup on the machine:
SILVERSTONE Grandia 04
DeZen PSU 500 Watt, TitanPower, 17-19 db
MB: Asus P8H77-MLE
CPU: Intel i3 2120
2x4 GB Corsair Vengeance ram (just bought new ones to see if it would help)
OCZ Agility 3 SSD 120 GB
1,5 TB WD Caviar Green
Asus P7131 Tuner
TERRATEC Cinergy DT USB XS Diversity
Hauppauge! WinTV-NOVA-T-Stick-Diversity
Hauppauge! Smart CI USB

My previous setup was with a AMD 240e but I have made a clean install.

I use Microsoft Security Essentials for antivirus and have firewall turned on.

The Media Centre machine is on for 24/7 on sleep mode for recordings or turned on for showing recordings.
Since the upgrade I have BSOD most times after it is turned on after sleep. The STOP occurs 4-5 minutes after the wake up either the wakeup is initiated from a recording or from user. I even see BSOD occur in the middle of the night where I have no recordings or other activity.

I have made several new install and tried to exclude the SSD and install a 32 bit Win7 – but the BSOD still occurs 4-5 min after awake.

I have updated all drivers and tried to run Verifier with no luck.

Hopefully someone can help

RELEVANCY SCORE 200
Preferred Solution: BSOD after sleep mode, error DRIVER POWER STATE FAILURE 0x0000009f

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD after sleep mode, error DRIVER POWER STATE FAILURE 0x0000009f

I have updated the Perfmon details - I had forgot to run the Windows Experience Index

Read other 9 answers
RELEVANCY SCORE 168.8

Hello

I am experiencing a BSOD (DRIVER POWER STATE FAILURE) error with my ACER notebook.
It always come up after I put the computer in sleep mode.

After dozen of search and websites, I found this forum.

I hope you will be able to help me.

Please find below the informations about my OS
- Windows 7 Home Premium Edition
- x64
- OEM
- age of the system : 3 years old. The hard drive has been replaced 1 year ago.
- age of OS installation : 2 days old (reinstalled from the recovery disk)

I have also attached the System Health Report AND the BSOD Dump & System File Collection report.

Let me know if you need something else... and Thank already !

A:BSOD after sleep mode, 0x0000009f (DRIVER POWER STATE FAILURE)

Please install any Windows Updates you have not yet installed. I notice you do not have Service Pack 1 installed yet.Update to Service Pack 1 (SP1)Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 (KB947821) [August 2011]

Download Details - Microsoft Download Center - System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [August 2011]

Steps to follow before you install Windows 7 Service Pack 1 from the Microsoft Download Center

Service Pack 1 Download site




Crashes indicate USB device issues.Start with USB Driver - General Fix for Problems to resolve the USB issues. Also, USB ports can sometimes enter a safe power state to protect the system from power surges due to USB devices. To reset the USB ports to a nominal power state:
Shut down and turn off the computer.
Unplug the computer from the wall or surge protector (then remove the battery if it is a laptop).
"Remove the computer from any port replicator or docking station, disconnect
cables to printers or devices such as external monitors, USB memory sticks or SD cards, headset or external speakers, mouse or auxiliary keyboard, turn off WIFI and Bluetooth wireless devices." (Use Hard Reset to Resolve Hardware and Software Issues HP Pavilion dv5000 Notebook PC series - HP Customer Care (United States - English))
Hold down the power button for 30 seconds. This closes the circuit and ensures all
power from components is drained t... Read more

Read other 1 answers
RELEVANCY SCORE 136.4

Hello, all. Every now and again my laptop BSOD's when I leave it on sleep mode over night. Today the laptop lit up and started running while it was closed and I opened it to see the Driver_State_Power_Failure error message. Attached are the files gained from the SF Diagnostics Tool. Any help is greatly appreciated.

A:BSOD During Sleep Mode - Driver State Power Failure

Hello fran.

It appears that Avast is causing the BSODs there.

avast! Self Protection Driver

Code:
fffff880`02677de8 fffff880`068e2940Unable to load image \SystemRoot\System32\Drivers\aswSP.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSP.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSP.SYS
aswSP+0x2f940
Description here: Driver Reference Table - aswSP.SYS

avast! Virtualization Driver

Code:
fffff880`02677d68 fffff880`066d32ccUnable to load image \SystemRoot\System32\Drivers\aswSnx.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
aswSnx+0x4e2cc
Description here: Driver Reference Table - aswSnx.SYS

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Using more than one antivirus program is not a good practice. It will make your system unstable in turn. Uninstall McAfee Using McAfee Removal Tool.

Daemon Tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known BSOD causer. Uninstall Daemon Tools at first. Then download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
Double click to open it... Read more

Read other 1 answers
RELEVANCY SCORE 136.4

I have tried to test this issue my self by trying to read trough the DMP file and Event Viewer. (haven't done this before, so i think i have possibly overlooked something)
The computer model is: HP ProBook 430 G2
The things i have tried is uninstalling and updating the drivers.
Using another OS Disk (It worked fine when doing this)
Starting in safe mode (This also worked fine)
Checked advanced power settings (Was nothing wrong there from what i could see)

Read other answers
RELEVANCY SCORE 136.4

Hey!

I got an BSOD from sleep mode. Was off to go outside the summer heat today and when I came back... BSOD..


However the system managed to dump two files for me on BSOD.

Take a look and thanks for the help you give me :)

A:DRIVER POWER STATE FAILURE Sleep mode BSOD.

Hello,

Please take a look at the following thread and perform all of the requested steps.

Once you have all the requested reports please attach back here.

http://www.techsupportforum.com/foru...ta-452654.html

One dump is really not sufficient to determine the cause. The reports will also provide other info to help diagnose the issue.

The dump provided indicates a problem with the Realtek Network driver please try updating or re-installing this driver.

Realtek

I would also suggest that you fully update Windows including the Windows 7 Service Pack.


Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`03268000 PsLoadedModuleList = 0xfffff800`034a5e50
Debug session time: Fri May 10 12:00:54.715 2013 (UTC - 4:00)
System Uptime: 0 days 8:41:33.010
Loading Kernel Symbols
...............................................................
................................................................
...........................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *... Read more

Read other 2 answers
RELEVANCY SCORE 134.8

I'm using a Lenovo Y50 running Windows 8.1. This issue has been happening every now and then for the past week or so. I noticed it occurs briefly after waking the computer from sleep mode. I can get to the desktop but about a minute after waking, the laptop will freeze up and give me a blue screen saying it was a DRIVER_POWER_STATE_FAILURE. I'm assuming this error has to do with some driver, but I don't know how to figure out which driver is the one causing the issue. I looked in Device Manager and can't find any yellow exclamation marks pointing out issues.

Here's a link to the most recent dmp file:
https://drive.google.com/file/d/0B2kQd8xpvK9STnd3MjVFWHJJOEE/view?usp=sharing

Thank you in advance to anyone who can help me out with this!
 

A:BSoD - Driver Power State Failure after waking from sleep mode.

For the time being and for troubleshooting, please uninstall Trend Micro and just
utilize Windows Defender. Trend Micro can be reinstalled once the problem is isolated.
http://esupport.trendmicro.com/en-us/home/pages/technical-support/1105809.aspx

What is all plugged in via USB?
Did this started happening after installing/updating Razor Synapse?
 

Read other 1 answers
RELEVANCY SCORE 131.6

Please help I have had this issue with a BSOD 0x9f for some time now.

I am not sure if it could be a program that I have on my computer that is conflicting with Vista. I am getting a free upgrade to Windows 7 soon.

Any help would be appreciated!

==================================================
Dump File : Mini110509-02.dmp
Crash Time : 11/5/2009 6:25:00 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : fffffa80`07fb8050
Parameter 3 : fffffa80`07fbd790
Parameter 4 : fffffa80`0b016590
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+5a450
File Description :
Product Name :
Company :
File Version :
==================================================

==================================================
Dump File : Mini110509-01.dmp
Crash Time : 11/5/2009 5:44:45 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : fffffa80`040e3050
Parameter 3 : fffffa80`040e9060
Parameter 4 : fffffa80`06251c60
Caused By Driver : crcdisk.sys
Caused By Address : crcdisk.sys+2f09050
File Description :
Product Name :
Company :
File Version :
==================================================

==================================================
Dump File : Mini110309-02.dmp
Crash Time : 11/3/2009 6:57:45 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : fffffa80`0... Read more

Read other answers
RELEVANCY SCORE 131.6

Hello. This isn't for my PC, but my brother's. I was not awake during the event, but I was able to go into event viewer and get a little more detail on it after he told me what happened

His specs:
ASUS M5A78L-M LX Plus
AMD Athlon x2 II 255 (AM3)
x2 4GB G.SKill ARES
2GB Radeon HD 5670
500W PSU
750GB HDD (Seagate) (Windows 7 Home Premium x64 installed, default boot device, was loaded at the time)
320GB HDD (Hitachi) (Windows 10 Technical Preview installed, was not booted to nor loaded at the time)
SATA DVD Combo Drive (I think it's an LG)
Linksys AE1000 USB WiFi Adapter
This morning he was having Internet connection issues. In the system tray his wifi showed no internet access, but was connected to our router. When he went to hit 'Disconnect' it 'was showing that he was hitting it and would not disconnect'. He then unplugged his USB adapter from it's port, waited several seconds an reconnected it. It's activity light stayed off. He then tried to bring the network menu back up from the system tray, but it only showed the 'hover over information' and would not bring up the list of connections. He then went to the Control Panel to try to access the Network and Sharing Center from there, but the window would not come up. He then decided to restart his PC, to which he noted it stayed on the shut down screen for a while, at least 10 minutes. That's when the blue screen popped up.

He was able to catch that it said 'Driver Power State Failure' before it fully powered down and then... Read more

A:BSOD 0x0000009f Driver Power State Failure

Hi RaidenRaccoon.

Update the driver to your brothers Linksys adapter.






Quote:
AE1000 Support | High Performance Wireless-N Adapter
Windows 7 Driver04/27/2012
Ver.3.1.12.0




Let us know for any further BSOD.
____________________________________

Code:
*** WARNING: Unable to verify timestamp for ae1000w7.sys
*** ERROR: Module load completed but symbols could not be loaded for ae1000w7.sys
\Driver\AE1000
Args: 00016600 00000000 00000006 00000005

Code:
Image name: ae1000w7.sys
Timestamp: Fri Jan 15 13:45:48 2010 (4B502434)

Read other 1 answers
RELEVANCY SCORE 131.6

Hello Win 7 experts,

I have a Lenovo T520, running Win 7 Pro SP1 on a clean install on a Crucial M500 mSATA SSD. It always crashes when I close the laptop and it sleeps. It did this before as well when I was running a Samsung 830 SSD previously, so I'm hoping I have an outdated driver somewhere that is causing this issue. Thankfully this is not a major problem, but it is annoying and I'd like to get it solved once and for all.

DM Log Collector results are attached to this post.

Thanks in advance for your help.

Ed

A:BSOD DRIVER POWER STATE FAILURE 0x0000009f

Welcome to the forum.

Do you have anything connected to USB ports?

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\admin\Downloads\New folder\ELOUIE-T520-PC-12_28_14_211908_84\122814-8923-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18526.amd64fre.win7sp1_gdr.140706-1506
Machine Name:
Kernel base = 0xfffff800`02e54000 PsLoadedModuleList = 0xfffff800`03097890
Debug session time: Mon Dec 29 06:10:57.975 2014 (UTC + 6:00)
System Uptime: 0 days 2:02:18.818
Loading Kernel Symbols
...............................................................
................................................................
...............................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************... Read more

Read other 4 answers
RELEVANCY SCORE 131.6

Greetings,

Ever since I got my laptop (september 2011) I've been having problems with my sleep and hibernate functions. I have tried a lot of different things but nothing has worked so far. (I will list them later in this post.)

I will try to make an overview to make my problem as clear as possible:

The problem:
My laptop crashes after a few minutes after waking up from Sleep or Hibernate state. It looks like it gets stuck in a not responding state and eventually the BSOD will appear.

Things I have tried and good to know:
When I bought my laptop, the first thing I did was a clean install of Windows 7 Professional x64 (ENG) to get rid of all the bloatware of Asus. The OS that came with the laptop before the current one was Windows 7 Home Premium x64 (DUTCH)
Installed the latest Nvidia driver
Disable and reable programs that automatically launch when my laptop boots (e.g. "ATKOSD2", "ATKMEDIA", "ETDWARE", "HControlUser" etc.)
Downloaded all the latest drivers from the Asus site
Flashed my BIOS to a newer version
Changed the Advanced settings of the Power Options of my power plan. (e.g. that my hard disk doesn't turn off, change the power savings options in PCI Express > Link State Power Management)
Removed the P4G (Power4Gear) program. (Asus program for power plans)
I'm getting a bit desperate here and it would be really nice if I could start using the sleep state (for school etc.)

Any chance you could help me ?

I added the SF ... Read more

A:BSOD Driver Power State Failure 0x0000009F

Hi Ghoul155

Remove the software below

Code:
??\C:\Windows\system32\drivers\aswMonFlt.sys
Avast software


Code:
\??\C:\Program Files (x86)\ASUS\ATK Package\ATKGFNEX\ASMMAP64.sys
Asus ATK


If you want to reinstall ATK look at the link below

ASUSTeK Computer Inc. -Support- Drivers and Download ATK_package

Download Version V1.0.0023 by clicking on the Global button.


Update the Software below


Code:
\??\C:\Windows\system32\Drivers\CVPNDRVA.sys
Cisco VPN Software


Run Malwarebytes Malwarebytes : Malwarebytes Anti-Malware removes malware including viruses, spyware, worms and trojans, plus it protects your computer

When the installation is done uncheck Enable free trial of Malwarebytes (see image below )



Update the definitions and do a full scan

Read other 9 answers
RELEVANCY SCORE 130.4

Hello,

I have had many BSOD's lately. Most are occurring when starting games such as World of Warcraft, but they have occurred during other processes as well. The error message is for a Driver Power State Failure. I have looked on many sites and found nothing that suits my issue I will be posting all the dump files. Thanks for the help!

A:Multiple BSOD Driver Power State Failure 0x0000009f

Hi mkb613 & Welcome to the forums ^_^,

I have analyzed your dump files and below is a summary of that :-

Code:
0: kd> !irp ffffe0013f957ca0
Irp is active with 6 stacks 4 is current (= 0xffffe0013f957e48)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe0013b1ef060 00000000 fffff801d1ad8fc4-ffffd000ec50f8f0 Success Error Cancel pending
\Driver\pci dxgkrnl!DpiFdoPowerCompletionRoutine
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 ffffe0013f1421f0 00000000 fffff8035d5242d8-ffffe00140299f08 Success Error Cancel pending
Unable to load image nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
\Driver\nvlddmkm nt!PopRequestCompletion
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe00140299f08

Args: 00000000 00000000 00000000 00000000


We see that the NVIDIA Driver is blamed in this case. Could you please pe... Read more

Read other 8 answers
RELEVANCY SCORE 130.4

I've been experiencing this BSOD on and off for a while now, and after doing some research came across a forum post suggesting to do a memtest. I've only had time to run it for 3 passes and will try for the full 8 later in the week when I have more time.

I thought I would start a thread to make sure there are no other underlying issues that could be the cause of the BSOD. Attached are the SF Files. Thanks!

A:BSOD Driver Power State Failure 0x0000009f (ntoskrnl.exe)

Hi MSB117.

The dedicated GPU is totally out!!! Does a restart brings it back?

Yes, a stop 0x9F can do it, based on sleep/hibernation settings and it is often seen for Optimus Technology/Switchable graphics. It is not the first instance.

As the GPU is causing continuous issue over a time, I would suggest you to contract Dell/Alienware servicing center.

Read other 7 answers
RELEVANCY SCORE 130.4

Somewhat recently i moved my laptop from school to home and suddenly the laptop went from perfect *or close enough* working conditions to having a multitude of problems from being unable to boot for a while, randomly restarting as if someone just pulled the plug, and this particular BSOD that seems to occur randomly seemingly unrelated to whether or not i'm doing anything. I haven't figured out the cause of the first two problems although the inability to boot went away at random, i'm considering the possibility that this BSOD and the other two issues are possibly related.

A:Random driver power state failure 0x0000009f bsod.

bump

Read other 1 answers
RELEVANCY SCORE 127.6

Recently got a new computer (about 1 month ago) for our office and we keep getting the following BSOD almost daily:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa80080d3060, 0xfffff80000b9c3d8, 0xfffffa800994bac0). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 051012-14414-01.

I tried to analyze the mini dump files myself, but I can't seem to get them to open up.

Not sure how to fix this issue and windows troubleshooting is useless.

Currently running:
Windows 7 Professional x64 Sp1 OEM

Any help is greatly appreciated, I am beyond frustrated at this point.

A:BSOD error 0x0000009f power state failure

Virtually all of these were related to USBHB.SYS

USB Driver - General Fix for Problems

Read other 1 answers
RELEVANCY SCORE 124.4

I am experiencing an issue with my laptop where I can't allow it to enter sleep mode or else it will restart/appear to have restarted the next time I wake it up. At first I thought it might be a power options issue, but I made sure that the computer was set to sleep and not restart when I close the lid. I've checked the bluescreen viewer and the cause of the restart seems to come from a driver power state failure coming from ntoskrnl.exe+1fcc1e, hal.dll+6a37, and storport.sys+33f0.

I've already run sfc/scannow to check for damaged files and I was also able to replace them using a DISM command, so now scanning the computer doesn't run into any errors, but this driver error still persists.

Sidenote: The driver errors mainly started after I reinstalled Kaspersky onto my computer to fix some issues that I had with it. Before that I was getting a couple of kernel data inpage errors, the latest of which occurred June 1.

A:Driver Power State Failure in sleep mode

Hi M15 and welcome to the forums ^_^,

I am in the process of analyzing your dump files further. Below has been provided analysis of your dump files for Informative purposes.

Code:
**************************Fri Jun 6 04:50:12.040 2014 (UTC + 5:30)**************************Probably caused by : storport.sys ( storport!RaSendIrpSynchronous+70 )

BugCheck 9F, {4, 12c, ffffe0017919e880, ffffd00049969950}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_4_storport!RaSendIrpSynchronous

MaxSpeed: 1800

CurrentSpeed: 1796

BIOS Version V2.20

BIOS Release Date 02/18/2013

Manufacturer Acer

Product Name Aspire M5-481PT

??????????????????????????????????????????????????????????????????????????????????????``
**************************Fri Jun 6 01:42:48.219 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for iaStorA.sys

*** ERROR: Module load completed but symbols could not be loaded for iaStorA.sys

Probably caused by : iaStorA.sys

BugCheck 9F, {3, ffffe000d7f8e060, ffffd000ca5e9930, ffffe000da3955c0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_disk_IMAGE_iaStorA.sys

MaxSpeed: 1800

CurrentSpeed: 1796

BIOS Ver... Read more

Read other 12 answers
RELEVANCY SCORE 124

Hi, i keep having this issue. Anyone knows how to solve?
My minidump is https://skydrive.live.com/#cid=392FCBBA17F5ACA1&id=392FCBBA17F5ACA1%21187

A:BSOD when going sleep mode "DRIVER POWER STATE FAILURE"

Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation.

I would re-install newest driver available.

Read other 1 answers
RELEVANCY SCORE 122.8

I'm having a BSOD problem. After walking computer from sleep mode, within 1-2 minutes it will get a BSOD with the "driver power state failure" error and restart, but interestingly I never get the error the moment I wake up the computer. I'm using a Lenovo IdeaPad Y510P with Windows 8.1 64-bit. I already tried uninstalling the Intel HD 4000 driver, restarting computer, and installing the one on Lenovo's site (as this was suggested on the Lenovo forum as a common fix) but it didn't help. The problem only started occurring after one of the following:
- Updating Malwarebytes to latest last week
- Installing a Windows update last week (there were 3 installed components, 1 of them was an Intel HD 4000 driver update, forgot what the other 2 were)
- Updating GeForce Experience and latest NVIDIA Graphics Driver (337.88), it included NVIDIA PhysX System Software 9.13.1220
Here is a log created by WinDbg tool: 'BSOD dump' | TextUploader.com
Here is a log created by BluescreenView:
==================================================
Dump File : 060514-96281-01.dmp
Crash Time : 6/5/2014 7:23:39 PM
Bug Check String : DRIVER_POWER_STATE_FAILURE
Bug Check Code : 0x0000009f
Parameter 1 : 00000000`00000003
Parameter 2 : ffffe001`218f88e0
Parameter 3 : ffffd000`bff2b930
Parameter 4 : ffffe001`2561d1c0
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+153fa0
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+153f... Read more

A:Driver power state failure after resuming from sleep mode

Hi Lan1 and welcome to the forums ^_^,

I have analyzed your Dump file and below has been provided an analysis of your dump file for informative purposes :-

Code:
2: kd> !analyze -v*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe00135b5c060, Physical Device Object of the stack
Arg3: ffffd000c3df9930, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe0013217d880, The blocked IRP
Debugging Details:
------------------


DRVPOWERSTATE_SUBCODE: 3
DRIVER_OBJECT: ffffe00135b70c30
IMAGE_NAME: usbccgp.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 52678625
MODULE_NAME: usbccgp
FAULTING_MODULE: fffff80157d82000 usbccgp
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
CURRENT_IRQL: 2
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
ffffd000`c3df98f8 fffff801`31803c1e : 00... Read more

Read other 7 answers
RELEVANCY SCORE 122.8

I am using lenovo G580-20150.
I know this problem have been opened a tread but the problem i dont' think it's same so i woud like to ask for some solution after listening to my problem.
I have been user of windows 8 and 8.1 for quite some time.
everything works fine for me for the windows that i currently using , windows 8.1.
including i can put in sleep and wake it as usual.
but ! since past few days i notice that my computer getting weird when i enter sleep mode (for example closing the lid)
it crash... it bsod.

And it occur since the day after i installed somekind of VPN software and wiFI sharing that my friend gave me.
After that day, i can't put my computer into sleep. whenever i do that it keep crash.

at first , i thought lenovo energy management that cause the prob
so i uninstalled... it still makes no different , still i can't put my computer to sleep.
after that i uninstalled the vpn and wifi sharing software, it still makes no different.
But i am very sure that the vpn and wifi sharing software cause the problem.

Because before this everything works fine until that two software comes to my computer. I really need someone that able to analysis the dmp file. TQ

I willing to learn and contribute if i were given the opportunity . tq

A:Driver Power State Failure after enter sleep mode

Hi Eric & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
0: kd> !irp ffffe00175b29e10
Irp is active with 3 stacks 2 is current (= 0xffffe00175b29f28)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe00177cc0050 00000000 fffff8025f7952d8-ffffe00173c59d60 Success Error Cancel pending
\Driver\tunnel nt!PopRequestCompletion
Args: 00015600 00000001 00000004 00000003
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe00173c59d60
Args: 00000000 00000000 00000000 00000000


Now, as we can see from the Dump file analysis, "tunnel.sys" has been blamed which is the Microsoft's Tunneling Driver but since it is a component of Windows, chance of it being the culprit is extremely low. This means your guess that the BSOD are caused by the VPN Software.

On checking the Drivers, I found the SoftEther VPN installed on your system. Please uninstall it from the system and see if the system still BSOD's or not.

Let me know how it goes ^_^.

Read other 3 answers
RELEVANCY SCORE 119.2

hello,
my laptop has been having a BSOD and I believe it is something related to Driver power State Failure. It just happened today randomly and I do not know why it happened. I will upload the DM Log in this post.

Thank you.

Read other answers
RELEVANCY SCORE 119.2

I am having an issue with a bsod, driver power state failure oxoooooo9f. It happens at random times, some times with a usb device plugged in and sometimes without. I did all I can think of.

Any help would be greatly appreciated!

Mini101609-01.dmp 10/16/2009 6:19:22 PM DRIVER_POWER_STATE_FAILURE 0x0000009f 00000000`00000003 fffffa80`05be6050 fffffa80`05d0b790 fffffa80`06db3270 x64

Operating System System Model Windows Vista Home Premium (x64) Service Pack 2 (build 6002)
Install Language: English (United States)
System Locale: English (United States) Gateway P-7805u Gateway MG1
Enclosure Type: Notebook Processor a Main Circuit Board b 2.27 gigahertz Intel Core2 Duo P8400
64 kilobyte primary memory cache
3072 kilobyte secondary memory cache
64-bit ready
Multi-core (2 total)
Not hyper-threaded Board: Gateway IMV
Bus Clock: 266 megahertz
BIOS: Phoenix Technologies LTD 9C.17.00 12/16/2008 Drives Memory Modules c,d 309.33 Gigabytes Usable Hard Drive Capacity
218.22 Gigabytes Hard Drive Free Space

HL-DT-ST DVDRAM GSA-T50F [CD-ROM drive]

Hitachi HTS723232L9A360 [Hard drive] (320.07 GB) -- drive 0, s/n 807090CF4100EN0GWYCY, SMART Status: Healthy
O2Micro SD [Hard drive] (8.01 GB) -- drive 1 4090 Megabytes Usable Installed Memory

Slot 'M1' has 2048 MB (serial number 1234-B0)
Slot 'M2' has 2048 MB (serial number 1234-B1) Local Drive Volumes
c: (NTFS on drive 0) 309.33 GB 218.22 GB free
 

A:driver power state failure 0x0000009f

I posted this in the wrong thread please delete!
 

Read other 1 answers
RELEVANCY SCORE 119.2

When I go to open my laptop back up everything comes on but the home screen won't come on. The fans run, LED backlight and keyboard comes on. I have to turn the laptop off by holding the power button then it all comes up. EDIT: I have went through the Lenovo Service Bridge and checked for updates and the only thing that wasn't updated was the solutions center so it looks like everything is up to date.Also I threw in the driver power state failure so I didn't have to open another thread. That has been going on for some time while I'm doing things and I'm not sure what to do. 

Read other answers
RELEVANCY SCORE 119.2

When I go to open my laptop back up everything comes on but the home screen won't come on. The fans run, LED backlight and keyboard comes on. I have to turn the laptop off by holding the power button then it all comes up. EDIT: I have went through the Lenovo Service Bridge and checked for updates and the only thing that wasn't updated was the solutions center so it looks like everything is up to date.Also I threw in the driver power state failure so I didn't have to open another thread. That has been going on for some time while I'm doing things and I'm not sure what to do. 

Read other answers
RELEVANCY SCORE 118.8

I've started getting driver power state failures BSODs after my computer goes to sleep.

These started in the last couple of weeks. It's happened twice today already. When I first noticed these occurring, I used System Restore to undo my last installs, but it didn't help.

I'd greatly appreciate any help fixing this.

A:BSOD after going to sleep, driver power state failure

Welcome

Your Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC is causing BSoD
Update to latest drivers

Code:
>[ 16, 2] 0 e1 fffffa8005c3a050 00000000 fffff800032d5200-fffffa8007049c50 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\Rt64win7.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Rt64win7.sys
*** ERROR: Module load completed but symbols could not be loaded for Rt64win7.sys
\Driver\RTL8167 nt!PopSystemIrpCompletion
Args: 00014400 00000000 00000004 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8007049c50

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm Rt64win7
start end module name
fffff880`06d15000 fffff880`06d7f000 Rt64win7 T (no symbols)
Loaded symbol image file: Rt64win7.sys
Image path: \SystemRoot\system32\DRIVERS\Rt64win7.sys
Image name: Rt64win7.sys
Timestamp: Wed Jan 26 19:34:03 2011 (4D4022CB)
CheckSum: 0006AFBB
ImageSize: 0006A000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Source | Driver Reference Table

Also Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

→ RAM - Test with Memtest86+
→ Guide to using Memtest86+ - Geeks to Go Forums

Read other 9 answers
RELEVANCY SCORE 118.8

Been having issues with sleep mode with my build for months but in the past couple weeks it has gotten worse. When the computer goes into sleep, there's about a 50 percent chance it will wake up when I move the mouse. The other times I have to hard restart. In the past week it is now BSODing and giving me the attached dump reports. I'm pretty sure it's a driver issue but I can't narrow it down any more than that. Interested to hear what the experts think.

A:BSOD DRIVER STATE POWER FAILURE 9f, on sleep

Hi slash196.

Update the driver to TP-LINK 150Mbps Wireless Lite N Adapter from Download - Welcome to TP-LINK, by matching with your device number.

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.

Code:
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack and Update Center - Microsoft Windows

Also, if possible, update the BIOS to Version 1501 from ASUSTeK Computer Inc. -Support- Drivers and Download M4A88TD-M/USB3

Let us know the results.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8006a9e060, fffff80000b9c518, fffffa800a2fb920}

Probably caused by : ntkrnlmp

Followup: MachineOwner
------------------------------------------------------------------------------------------
Dispatch routines:
[00] IRP_MJ_CREATE fffff880016e7c30 ndis!ndisCreateIrpHandler
[01] IRP_MJ_CREATE_NAMED_PIPE fffff8800177e490 ndis!ndisDummyIrp... Read more

Read other 1 answers
RELEVANCY SCORE 117.6

Dear Sir/Madam,

I've been having this issue since updating to Windows 8.1. I will wake my computer from it's sleep and a few minutes later I get the BSOD. In one notable event early on, I got two in a row after the computer restarted from the previous BSOD.

I fiddled with my power settings (I was trying to avoid my computer actually shutting down during sleep/hibernation) a few months ago and after that I didn't have any BSOD events that I recall until this past week. When they do happen, they tend to happen in rapid succession, as you can see from the dates on the collected data I've attached (I see there's a .txt file with all my computer's information for you reference) - I've had one every day for the past three days.

I've read through many of these threads and tried several of the solutions. I am running verifier.exe since the BSOD has started up again since from what I can understand from reading the .dmp file and this forum that the message I'm getting about ntoskrnl.exe is misleading (?).

Please take a look at the dumps and other information collected from the DM Log Collector Tool and let me know if you can help me solve this problem.

Thank You.

A:BSOD Waking from Sleep (power state driver failure)

Hi, pnutbudder,

I've been having a similar problem since a few weeks ago. I suspect this is due to a recent Windows or driver update, since both of us had the same problem at the same time. I'm going to take a look at your dump files in a few hours, but in the meantime, could you tell me

1. whether you have Evernote or any Blizzard games installed
2. whether you've installed any new programs recently,
3. what graphics drivers you have installed,
4 what music or audio programs you have installed (eg, music players, movie editors, music studios and recording programs, game streaming programs)?

EDIT: Okay, I took a look at your dump files, and they point to a bad interaction between the "usbccgp.sys" and the "ksthunk.sys" driver. These are the same drivers that are misbehaving on my system, too (Lenovo Y510P). As far as I can tell, the only device that uses ksthunk.sys is the Lenovo EasyCam. Try this fix:

1. Download the "Broadwell" version of the camera driver on this page: http://support.lenovo.com/us/en/prod...loads/DS101169 . We're going to replace your current camera driver with Lenovo's original camera driver.
2. Open "Device Manager" by right-clicking on the lower left corner of the screen.
3. Double-click "Imaging Devices" to open it.
4. Right-click "Lenovo EasyCamera" and click "Disable". You should see a small downward-pointing arrow appear next to the picture.
5. Right-click "Lenovo EasyCam... Read more

Read other 5 answers
RELEVANCY SCORE 117.6

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8009DBD060
BCP3: FFFFF80000B9C518
BCP4: FFFFFA800ED33010
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\120410-48828-01.dmp
C:\Users\Jon\AppData\Local\Temp\WER-70980-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Yeah, i get this whenever my computer goes idle and into sleep mode, and when i shut down. Any way to fix???

minidump -- http://www.megaupload.com/?d=J07IWJQ0
 

Read other answers
RELEVANCY SCORE 117.6

New build i7 asrock motherboard W8 Pro. when waking from sleep everytime I get driver_power_state_failure BSOD.
Looking for some help on where to start. Updated the bios and everything else works great.

Thanks for any advice

Attachment 14584

A:BSOD Driver Power State Failure when waking from sleep

You have 3 hard drives - what is the make/model/wattage and age of your Power Supply?

We've seen a number of BSOD issues with SSD's. Here's the information that I've compiled so far:





There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version (VERY IMPORTANT!!!)
- Update the motherboard controllers drivers to the latest available version from the controller manufacturer (NOT the mobo manufacturer unless you can't find any on the controller manufacturer's website)
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard). Be sure to update ALL controllers on the motherboard!
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to switch controllers also.
- Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with you... Read more

Read other 5 answers
RELEVANCY SCORE 116.4

I am getting a BSOD mostly when I turn the computer on from sleep mode during sleep wifi will be on and most probably 1 of the browsers would have been working.

Reinstalled Windows 7 on Oct 8 and downloaded some drivers from the net.

I have uploaded the SF diagnostic zip file

Any help would be greatly appreciated

A:BSOD after turning computer on from sleep DRIVER POWER STATE FAILURE

Welcome aboard. Is there any reason that you haven't installed service pack 1?

Read other 9 answers
RELEVANCY SCORE 115.2

i guess i've been having this problem for about a month or so now and it's really becoming frustrating because everytime i have to leave my computer i have to shut it down if i don't want a BSOD..

i hope that someone can help me... every time i try to hibernate my laptop which is a HP DV4 Windows 7 Laptop i get a blue screen of death. it only started happening recently....maybe after i installed bit-defender..i'm not really sure..but it was doing fine before bit defender......

i used blue-screen view and with each time it registers a error it's with the driver for the NTOSKRNL.exe... i really hope that someone could help me because i just want my computer to go back to normal....and i wish that the problem has nothing to do with bit-defender......

tell me what you need and i'll try my best to get it to you so you can assist me with this problem cause i'm kinda new to the whole forum thing....

thanks..

A:[SOLVED] BSOD Driver Power State Failure When Hibernating/Sleep Windows 7 HP DV4

Hi and welcome to TSF please follow the instructions here http://www.techsupportforum.com/f217...ns-452654.html

Read other 17 answers
RELEVANCY SCORE 109.6

I experienced a BSOD with the Driver Power state failure error and BlueScreen view attributed it to ntoskrnl.exe
Here are the dump files generated by my PC during the crash
Attachment 305665

Can someone please help me analyse them and find the Driver responsible for the problem. I refrained from starting a thread since there are already so many with a similar problem, I just decided to post on the most recent

A:BSOD with the Driver Power state failure error

Post it following the Blue Screen of Death (BSOD) Posting Instructions.
____________________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa800899f060, fffff80000ba2748, fffffa8004931a10}

Probably caused by : vwifibus.sys

Followup: MachineOwner
---------

Read other 5 answers
RELEVANCY SCORE 109.6

HP Pavilion DM1 notebook with Windows 7 OS 64 bit version has been experiencing BSOD many times for the past few weeks.
Normally, the BSOD occurs when there is a sudden interruption in the Internet connection (Internet connection is through a USB modem as a dial-up connection). In such a case, the system refuses to acknowledge the presence of the USB in the port. After approx. 10 minutes the BSOD occurs. Else, if the Shut Down command is given, the Shutting Down screen appears, it remains for around 10 minutes and BSOD occurs eventually.

The screen that appears is as follows:

DRIVER POWER STATE FAILURE
Technical Information:
STOP : 0X0000009F 0X0000000000000004 0XFFFFFA800141DB50 OXFFFFF80000B9C510
Problem Event Name: Blue Screen
OS Version - 6.1.7601.2.1.0.768.2
Locale ID - 16393
Service Pack - 1_0
product - 768_1

Files that help describe the problem:
C:Windows\Minidump\070112-21996-01.dmp
users\jijo\appdata\local\temp\WER-36582-0.sysdata.xml

Event Viewer Log Entry:
Log Name: System
Source: kernel Power
Event ID 41
Level Critical
Task Category - 63
Name: Microsoft Windows Kernel Power
[Guid] 331C3B3A-2005-44C2-AC5E-77220C37D6B4
Sleep In progress: False
Power Button Time Stamp -0

"The system has rebooted completely without cleanly shutting down first. This error could be caused if the system stopped responding,crashed or lost power unexpectedly"

The system is approx. 1 year old. The OS is Windows 7 Home Basic 64 bit OEM... Read more

A:BSOD - Driver Power State Failure error:

Analysis:Your earlier crashes point to your Internet Download Manager software.

Your most recent crash reports are inconclusive. They may also be related to the Internet Download Manager software.

I do note that your USB modem device driver is out of date. You should see about finding an update for the driver. It may be causing all the crashes due to the age of the driver.

Read other 3 answers
RELEVANCY SCORE 109.6

Hi everyone,
I have had this problem for some time now.It usually occurs when I browse the internet,and I know it because I feel the CPU increasing speeds My laptop(HP Pavilion dv6 is not even 1 years old and I bought it brand new,so I didn't overlock it or anything so I do not know why that happens.When I am aware of the fact that my pc has started heating up I try exiting most of the application and do a clean restart but the Pc stucks at shutting down... and then gives me that blue screen.
Under Techical information it says:
***STOP: 0x0000009F(0x0000000000000004,0x0000000000000258,0x0000000000000000,0xFFFFF80000B9C3D0)
I don't know what the problem is and I do not know if I can fix it.
I need all the help I can get.
Thanks in advance
P.S I have uploaded the zip file from the SF diagnostic tool so I hope it helps

A:BSOD Driver Power State Failure error

Welcome aboard.
Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

Read other 9 answers
RELEVANCY SCORE 109.6

Hey guys I have been seeing this BSOD for sometime on my own machine but now a colleague of mine is seeing it in the office as well, was wondering if someone could help me out identifying what is causing this? THere doesn't seem to be a certain link to a piece of software i am running while this happens, its very random. Sometimes I will just leave my desk come back and it reboots and just to test I had it on running nothing and boom it rebooted but then again other days it will run all day no issues.

Please see attatched, thanks in advance

A:BSOD, Driver Power State Failure error

Hello. Please update your system specs in User CP. Knowing what hardware you have is very useful in any kind of troubleshooting.

Read other 1 answers
RELEVANCY SCORE 108.4

hi guys!
I have just bought a new pc and it has already an error!! When I swicht off my pc, a bluescreen appears with "driver power state failure".
It's the first time I have seen this error: (a little part is in italian, but errors are international! Sorry)

Firma problema:
Nome evento problema: BlueScreen
Versione SO: 6.1.7601.2.1.0.768.3
ID impostazioni locali: 1040

Ulteriori informazioni sul problema:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8007AD3060
BCP3: FFFFF8000495A3D8
BCP4: FFFFFA800D1CC880
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
File che contribuiscono alla descrizione del problema:
C:\Windows\Minidump\070412-18470-01.dmp
C:\Users\Trogolo\AppData\Local\Temp\WER-102430-0.sysdata.xml

Leggere l'informativa sulla privacy online:
Visualizzare Informativa sulla privacy di Windows 7. - Microsoft Windows

Se l'informativa sulla privacy online non ? disponibile, leggere quella offline:
C:\Windows\system32\it-IT\erofflps.txt
thank you very much for your time and your help!!

Daniela

A:BSOD Driver power state failure, error BCcode: 9f

You need to provide us with the information if order to be helped, please follow these instructions:
http://www.sevenforums.com/crashes-d...tructions.html

Read other 1 answers
RELEVANCY SCORE 108.4

Hello,
My computer was stuck in shut down twice and have received Driver Power State Failure BSOD.

OS: Windows 8.1 32-bit.

sfc /scannow -> clean

A:BSOD while Shut down, error Driver Power State Failure

Blue Screen viewer points at ndis.sys and ntoskrnl.exe as culprits

Read other 2 answers
RELEVANCY SCORE 107.2

Hello,
I got a new Asus laptop, G551JX DM036H. It was running fine for few weeks until recently. The problem is that when i don't use my laptop charger a BSOD error occurs stating driver power state failure and restarts the system. it doesn't occur in specific time just randomly like sometimes seconds after laptop starts and sometimes half an hour later. i checked online videos and checked all the devices for the yellow mark but there isn't one and this post is my last resort to handle it myself. Can someone please help me out its my project semester and i don't want my laptop to switch off while I am presenting the project in exam.
Thanks

A:BSOD error driver power state failure wen charger unpluged

Hi rahulpenn,

Welcome to the 8forums.
As you have a new laptop, do you have all the software that comes with a preinstalled laptop?

Read other 56 answers
RELEVANCY SCORE 107.2

I'm using a ASUS S56CA ultrabook which runs VERY SLOWLY (takes 5+ minutes to boot up)!
OS is Windows 8.1 with ALL the latest Windows Updates installed.

I get the BSOD error "Driver_Power_State_Failure" usually when trying to enter sleep mode or using the Instant ON feature from ASUS .. neither of them work properly so after researching online I've decided to REMOVE the Intel? Rapid Storage Technology (Intel? RST) RAID Driver .. reboot and it's still VERY slow to boot. I've also tried to d/l new drivers from the ASUS website (only BIOS and few others) which were also installed but still get same results. The Intel HD 4000 Graphics is also out of date but I cannot d/l the update from the intel website .. shows file not available?

It also does NOT shut down completely .. select Shut Down from the menu and screen goes BLACK but power never goes off .. so I must manually hold the power button 5 seconds to shut down.

Finally, I've turned OFF ALL power saving features in Power Options .. no sleep .. no turn HDD off, etc.

I need to know how to fix this system so it does NOT take 5 minutes to boot up please.

I'm also attaching the last 4 minidump files for review .. plus I'll use the SF utility tonight to get the other suggested files on this forum.

A:Driver Power State Failure" error BSOD using Windows 8.1

Attached SF zip file as requested in your post notes. Hope someone can fix this soon .. system takes 5 minutes to boot up and still get BSOD even after updating Intel RST drivers and disabling power options.

Thanks,
Shane

Read other 2 answers
RELEVANCY SCORE 107.2

Hello,

I left my computer on and open this morning before I left for class. When I returned, I had a BSOD, which specified "Driver Power State Failure" (I did not copy down any numbers, as I probably should have). I did a forced shut down (held the power button) and then restarted it, where it fortunately works for now.

My laptop is an Dell XPS-15, about two years old. I have not had any problems with it until now, and the past week or so it has been freezing up. I downloaded the SF Diagnostic Tool, and the zipped folder is attached.

I am uncertain what action to take next. Could someone advise me in how to fix the issue?

Thank you!!

A:BSOD after sleep or hibernation - "Driver Power State Failure"

upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.

Read other 3 answers
RELEVANCY SCORE 107.2

I have been using my asus laptop but recently started blue screening. When trying to shut it down the screen will go black, but the system lights remain on and it remains running, however irresponsive. It also began showing a blue screen with the warning "Driver power state failure".

Even after a factory reset this problem remains. Any help to figure out the problem would be greatly appreciated.

A:BSOD "driver power state failure", when shut down or sleep

Hi Chalcogen & Welcome to the forums ^_^,

I have analyzed your only dump file and a summary of that is given below :-

Code:
**************************Mon Jul 21 15:05:53.798 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for win32k.sys

*** ERROR: Module load completed but symbols could not be loaded for win32k.sys

Probably caused by : memory_corruption

BugCheck 9F, {4, 12c, fffffa800aeacb00, fffff88001e9e800}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: CODE_CORRUPTION

FAILURE_BUCKET_ID: MEMORY_CORRUPTION_LARGE

MaxSpeed: 1900

CurrentSpeed: 2395


Processor may be overclocked!
Expected Frequency: 1900
Actual Frequency: 2395
Overclock Ratio: 1.26053

BIOS Version S550CM.202

BIOS Release Date 11/23/2012

Manufacturer ASUSTeK COMPUTER INC.

Product Name S550CM

??????????????????????????????????????????????????????????????????????????????????????``


Now, since the dump file blames the "Win32k.sys" which is a Windows Component, chance of it being at fault it extremely low. Below is a list of 3rd party drivers found over your system :-

Code:
**************************Mon Jul 21 15:05:53.798 2014 (UTC + 5:30)**************************
ASMMAP64.sys Thu Jul 2 14:43:26 2009 (4A4C7A36)
atkwmiacpi64.sys Wed Sep 7 07:14:52 2011 (4E66CC94)
AiCharg... Read more

Read other 3 answers
RELEVANCY SCORE 105.2

My Toshiba laptop gives the above BSOD screen 9 out of 10 times when going to sleep. I have installed the latest Win 8 video drivers but that was no help.

I have attached a couple of the minidump files.

A:Driver, power, state, failure when laptop goes to sleep.

Hi,

Bit of a messy machine there. First thing is first. Update or uninstall your sptd.sys. The installer/uninstaller does either:

DuplexSecure - Downloads

----------

Update Synaptics Touchpad driver:


Code:
SynTP SynTP.sys Mon Aug 17 14:35:16 2009


----------

Update J-Micron Storage driver:


Code:
jmcr jmcr.sys Mon Jul 20 07:39:02 2009


JMicron/Home

-----------

Update from the manufacturer:


Code:
tosrfec tosrfec.sys Mon Jun 01 02:58:53 2009
tosrfcom tosrfcom.sys Tue Jul 28 06:18:20 2009
tosporte tosporte.sys Tue Jun 16 06:48:47 2009
Thpevm Thpevm.SYS Mon Jun 29 04:15:37 2009
thpdrv thpdrv.sys Sun Jun 28 22:02:56 2009


----------

Uninstall ESET. Windows 8 already has excellent a/v protection as a service.


Code:
epfw epfw.sys Tue Jun 28 03:30:10 2011
eamonm eamonm.sys Tue Aug 02 05:33:29 2011


----------

Uninstall ancient Acronis:


Code:
tifsfilt tifsfilt.sys Wed Aug 29 08:37:29 2007
timntr timntr.sys Wed Aug 29 08:38:23 2007


-----------

Update from manufacturer:


Code:
pgeffect pgeffect.sys Mon Jun 22 05:00:11 2009


---------

Visit Intel to let it scan to update storage drivers:


Code:
iaStor iaStor.sys Thu Jun 04 21:53:40 2009


---------

Update Realtek HD Audio:


Code:
RTKVHD64 RTKVHD64.sys Tue Jul 28 09:00:05 2009


Realtek

-------
Others needing update:


Code:
tdcmdpst tdcmdpst.sys Thu Jul 30 04:39:35 2009
TVALZ_O TVALZ_O.SYS Mon Jul ... Read more

Read other 3 answers
RELEVANCY SCORE 105.2

Hi,
I've been getting persistent BSOD's when attempting to wake up my computer (Lenovo Twist u230) from sleep. I am also sporadically getting Kernal Data Inpage Error BSOD while using my computer.

My machine is Windows 8, installed from factory with a recent refresh done. SFC /SCANNOW and DISM both come up clean. All of my hardware diagnostics are also clean.

Help!

A:Driver Power State Failure on wake from sleep

Which hardware diagnostics have you done?

Please run Driver Verifier according to these instructions: Driver Verifier Settings

Just a guess at this point, but try removing Diskeeper to see if that helps.
If not that, then try removing the Citrix software to see if it helps.

Analysis:
The following is for informational purposes only.

Code:
**************************Fri Oct 11 09:56:37.534 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\101113-15578-01.dmp]
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 20:21:57.335
Probably caused by :Unknown_Image ( ANALYSIS_INCONCLUSIVE )
BugCheck 9F, {3, fffffa80036b7890, fffff800c68d07f0, fffffa800de92610}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa80036b7890, Physical Device Object of the stack
Arg3: fffff800c68d07f0, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa800de92610, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_ACPI_ANALYSIS_INCONCLUSIVE
CPUID: "Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz"
MaxSpeed: 1700
CurrentSpeed: 1696
BIOS Version GDETA1WW (1.61 )
BIOS Release Date 09/14/2013
Manufacturer LENOVO... Read more

Read other 1 answers
RELEVANCY SCORE 104

Laptop Sony Vaio Model VPCCW1Z4E
OS Windows 7 Home Premium Service pack 1
Processor Intel Core DUO P7450.
Norton 360 V5.2.1.3, security software

Laptop starts up and can shuts down with out any problem.
If try to hibernation or standby, it take long time accessing disc then crashes. The problem only started when upgraded to service pack 1.

All drivers have been update using driver dating utility by WinZip.

Dump files & system health check report is attached.

Will appreciate any help or suggestion in resolving this issue.

Thank you.

A:Power State Driver Failure on putting PC to Sleep or Hibernation

Two issues

1-Virtally all of these were sysRelated to NETwNv64.sys Wireless WiFi Link Driver from Intel Corporation causing pci.sys to crash. I would re-install with newest driver available.
2-Your Symantec. I would remove and replace with Microsoft Security Essentials.

Symantec is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

Read other 1 answers
RELEVANCY SCORE 103.2

Hi,

Every time I try to put put my laptop to sleep, hibernate, restart it or shutdown, it stalls for about 10 minutes before giving me a Driver Power State Failure.

Having installed "WhoCrashed" and "Windbg", I was able to determine it was related to "ntkrnlmp.exe", "ndis.sys", "raspppoe.sys" and a vpn driver at one point or another. I "believe" I managed to uninstall the offending vpn driver but of course still overall have the same issue.

This appeared to occur while trying to do a windows update last week but I can't be sure. I presume, there is a out of date or corrupt driver but just can't seem to determine which one.

Many thanks in advance,

Hob

A:Driver Power State Failure on Sleep, Hibernate, Restart or Shutdown

Please remove / disable items from the startup in taskmanager
These programs could interfere with the boot process giving you trouble and increase the boot time.
Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

Uninstall Daemon ToolsDownload the SPTD standalone installer and follow these steps:
Double click the executable to open itClick on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window

   Warning
Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.
ONLY install the drivers from your manufacturer!

Please remove your VPN software.

Code:
*** WARNING: Unable to verify timestamp for tap0901.sys
*** ERROR: Module load completed but symbols could not be loaded for tap0901.sys

Read other 0 answers
RELEVANCY SCORE 101.2

my laptop takes 20 to 30 minutes to shut down and comes up with driver power state failure message...i hope you can open the files i attached, was not sure on how to save those files...

A:driver power state failure - user-mode dump

Hi -

Your zip files contained a 2.3 MB user mode dump; not a post-mortem BSOD mini kernel dump.

However, I was able to obtain info that I believe points to your problem. It listed a 0xc0000005 exception = memory access violation.

Code:
Unable to load image C:\WINDOWS\winsxs\x86_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.6195_none_cbf5e994470a1a8f\mfc80u.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for mfc80u.dll
*** ERROR: Module load completed but symbols could not be loaded for mfc80u.dll
*** WARNING: Unable to verify timestamp for nspmain.exe
*** ERROR: Module load completed but symbols could not be loaded for nspmain.exe
*** ERROR: Symbol file could not be found. Defaulted to export symbols for msvcr80.dll -
Unable to load image C:\Program Files\INCAInternet\nProtect Anti-Virus Spyware 3.0\nspavpi.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nspavpi.dll
*** ERROR: Module load completed but symbols could not be loaded for nspavpi.dll
Unable to load image C:\Program Files\INCAInternet\nProtect Anti-Virus Spyware 3.0\nspfwpi.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nspfwpi.dll
*** ERROR: Module load completed but symbols could not be loaded for nspfwpi.dll
Unable to load image C:\Program Files\INCAInternet\nProtect Anti-Virus Spyware 3.0\nspclpi.dll, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nspclpi.dll
*** ERROR: Module load completed but symbols could not be loa... Read more

Read other 5 answers
RELEVANCY SCORE 100.8

- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? Yes
- an OEM or full retail version? OEM
- What is the age of system (hardware)? 20 months
- What is the age of OS installation 20 months

Been seeing DRIVER_POWER_STATE_FAILURE a lot recently. Seems to happen when the laptop tries to go into sleep mode. I recently updated the wireless and ethernet drivers, and the video card drivers, so I suspect one of them is the problem.

Thanks for your help!

A:BSOD when Laptop attempts to go into sleep mode, error 0x0000009F

Easy your Symantec.

Symantec is a frequent cause of BSOD's. I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_...080710133834EN

Microsoft Security Essentials - Free Antivirus for Windows

Read other 5 answers
RELEVANCY SCORE 100.8

I'd appreciate any help you can offer. It's an HP G62-435DX, about six to eight months old. The OS is Windows 7 Home Premium 64 bit OEM, and I have not reinstalled the OS since purchase.

The system is set to go into sleep mode when I shut the lid. It's worked fine up until the last four or five weeks. Now when open the lid, I get a black screen. System lights all appear to still be functioning. I usually just hold the power button in till it shuts down, then restart and everything is okay again. Tonight I let it sit at the black screen a while and after about 8-10 minutes it finally gave me the bsod, which I hadn't seen before since I usually just restart.

Thanks for your help!

A:Laptop BSOD when opening lid after sleep mode Error 0x0000009f

Hello joinertek,

These crashes were related to appliand.sys helper driver from Applian Technologies Inc.
Refer > Download Streaming Video - Applian Technologies






Quote:
The DRIVER_POWER_STATE_FAILURE bug check has a value of 0x0000009F. This bug check indicates that the driver is in an inconsistent or invalid power state.


Suggest you either update or remove the driver to test...

Read other 3 answers