Over 1 million tech questions and answers.

Perfmon.exe /report not generating after installing bluetooth driver

Q: Perfmon.exe /report not generating after installing bluetooth driver

I have a HP 630 notebook with win7 Ultimate 64 bit.When I tried to generate a system health report I am getting a time out error. So I went through many threads here about this problem but could not find a solution. Finally I made a clean Install and ran the perfmon.exe and found that I could generate the report. But when I installed the recommended driver Atheros Bluetooth driver(64) from HP's site, the report generation failed and gives time out error. My dilemma is that if I uninstall the bluetooth driver I can run system health report but bluetooth will not work. What am I to do to get both?

RELEVANCY SCORE 200
Preferred Solution: Perfmon.exe /report not generating after installing bluetooth driver

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Perfmon.exe /report not generating after installing bluetooth driver

Here's something from the helpfiles






Quote:
You can also create a new report for a data collector set by typing perfmon /report "Data_Collector_Set_name" at a command prompt. Typing perfmon /report without any other parameters will generate the System Diagnostics report.

Read other 9 answers
RELEVANCY SCORE 73.2

I just wanted to know if MS removed the system health report feature from performance monitor.
If so how do you start a system health report in Windows 10, it seems to differ from Windows 7
where you can find in advanced tools "Generate a system health report" ? Thanks!

Read other answers
RELEVANCY SCORE 66.4

When I try to generate the report it's telling me the interface is unknown! Any ideas? Thanks

A:perfmon /report

  
Quote: Originally Posted by seth500


When I try to generate the report it's telling me the interface is unknown! Any ideas? Thanks


Can you please describe in more detail exactly what steps you're going through to try and produce a report?

Maybe a screenshot or two to show where you are when finally push the last button that results in your "interface is unknown"?

Read other 5 answers
RELEVANCY SCORE 66.4

Trying to run perfmon in order to post necessary info to get assistance.

Full thread here: http://www.sevenforums.com/crashes-d...ml#post1980194

Any guidance on how to proceed?

A:Can't run perfmon report

PS - if you can't run perfmon after all this, just post about it after everything else is fixed.

Read other 1 answers
RELEVANCY SCORE 66

I have been getting the BSOD off and on for a while now. I followed the steps posted by jcgriff2. Everything is attached. I have Vista. When I purchased my pc from a retailer in 2007 I also bought the upgrade software to Vista Ultimate. OS 32-bit. Please help!

A:BSOD/ Perfmon Report

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\richc46\AppData\Local\Temp\Temp17_Windows_NT6_BSOD_jcgriff2[1].zip\Windows_NT6_BSOD_jcgriff2\Mini010511-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 6002.18267.x86fre.vistasp2_gdr.100608-0458
Machine Name:
Kernel base = 0x82005000 PsLoadedModuleList = 0x8211cc70
Debug session time: Wed Jan 5 19:25:07.047 2011 (GMT-5)
System Uptime: 7 days 2:40:53.245
Loading Kernel Symbols
...............................................................
................................................................
......................................................
Loading User Symbols
Loading unloaded module list
..................................................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
***********************************************************... Read more

Read other 1 answers
RELEVANCY SCORE 65.2

Hi,

I understand from the article that Pefmon report usually takes 60-90 sec to generate the report. What if I want to see report that last 6 hours? How do we do that?
http://blogs.technet.com/b/askperf/archive/2008/05/02/two-minute-drill-system-diagnostics-report.aspx

Read other answers
RELEVANCY SCORE 65.2

I am attempting to upload a BSOD case to get reviewed here but I am being prompted by the perfmon /report function to insert the last disk of the multi-volume set.

What does this mean?

A:BSOD - Perfmon /report problems.

An alternative method re uploading the DMP's only...

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 3 answers
RELEVANCY SCORE 65.2

I tried to follow the BSOD Posting Instructions but when I try to run a system health report (PERFMON) I get the message:
Error:
An error occured while attempting to generate the report.
The system cannot find the path specified.

My computer keeps blue screening on start up after entering my password. I dont know what to do and I really cant afford a new laptop

Please help!

Read other answers
RELEVANCY SCORE 65.2

Hi to all,

I am receiving a BSOD. I tried to post in another forum as it was not allowing me to access this one.

I saw the instructions we need to do to post in order for you guys to diagnose our problem.
However, when i attempt to run perfmon report, i get a message saying an error has occurred while attempting to generate report.

I am running the computer in Safe Mode as it is the only way I can run it.

Is there any other way I can go about doing the needed steps so you guys can help me, because i am not sure why that report is not running.


Other than the needed reports, i can tell you that
I am running Windows 7 Service Pack on a
Toshiba Qosmio x775
Intel Core i7-2670QM [email protected] 2.19GHz
8.00GB memory
64 bit operating system




My last BSOD said the following:

IRQL_NOT_LESS_OR_EQUAL
0x0000000a
fffff800`03f65cf0
00000000`00000002
00000000`00000000
fffff800`03f65cf0

Caused by driver: ntoskrnl.exe

Read other answers
RELEVANCY SCORE 64.4

I am unable to save as HTNL file. It does not give me the option when I click on file. When I click on it, it only gives the option for disk cleanup. Would like help so I can upload what is required. Thanks.

A:Having issues with BSOD file -perfmon/report

It is important we have the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

Try this way...

> Firstly make sure minidumps are enabled:






Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.


You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

Upload the contents of your "\Windows\Minidump" folder.





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.

Read other 1 answers
RELEVANCY SCORE 64.4

Hello,
 
Been following the BSOD posting instructions, I downloaded the Sysnative BSOD Dump + System File Collection App and it run just fine and created the zip, but when I try to run the PERFMON System Health Report (I'm using Windows 8.1) I keep getting an error message that says:
 
 



Error:


 

An error occured while attempting to generate the report.


 

 

The operator or administrator has refused the request.

 
 
Help anyone?

A:PERFMON System Health Report ***ERROR***

Just submit the Sysnative report. Don't worry about Perfmon for now
Sent from my phone

Read other 3 answers
RELEVANCY SCORE 64.4

Very recently I have been socked with at least three BSODs with these
error messages:

I_R_Q_L Not_Less_Than_Equal...(twice)

System_Services_Exceptions...(once)

I ran the diagnostic Memtest 86 yesterday and found no errors
with my memory.

I also ran an HD diagnostic and found no HD errors (Drive C: is solid state)

Can this Forum accommodate the attachment of a memory-dump collector
like DM Log Collector? (The saved log file can be up to 2 Mg, which may make it a problem), to analyze recent memory dumps?

I'm running under Win 7 Pro, BTW.

Thanks!

A:BSOD Sysnative Files & Perfmon Report

Quote:





Originally Posted by Herringbone


Can this Forum accommodate the attachment of a memory-dump collector like DM Log Collector?




We have our own collector.

Please follow our Blue Screen of Death (BSOD) Posting Instructions - Windows 10, 8.1, 8, 7 & Vista

No new thread required, post the results in your next post here.

Read other 10 answers
RELEVANCY SCORE 64.4

· OS - Windows 8.1 Pro with Media Center
·  x64 
· Original OS -  Windows 8
· Full retail version
· Age of system (hardware) - 3 1/2 years
· Age of OS installation - 13 months  
  Have you re-installed the OS? No
 
· CPU - Intel® Core™ i7-3537U CPU @ 2.00 GHz 2.50GHz
· Video Card - Intel® HD Graphics 4000
· System Manufacturer -  Samsung
· Exact model number (if laptop, check label on bottom) - NP510R5E-A02UB
 
· Laptop or Desktop? Laptop
 
Additional Info: I have 2 accounts on this laptop, an Admin account and a standard user account. I sign in with the Standard Account via Microsoft login and use the Admin password when I need to access admin functions. I rarely sign in with Admin account except in situations like this.
 
I have recently been experiencing extreme slowness and hanging, for example:
mouse will track but neither right or left click will register or takes so long to register I receive and error message.
screen is extremely slow to change upon powerup/bootup
screen will go black with no error messages
I have recently deleted multiple applications. I have run Malwarebytes and ADWCleaner and they identified and cleaned 3 PUPs only. I'll provide report files if needed.
 
As next step, I cam to bleepingcomputer and followed BSOD reporting protocol, signed in using my Admin account. The SysnativeFileCollectionApp.zip is attached, but when I went ... Read more

Read other answers
RELEVANCY SCORE 64.4

Hello Friend,
I have newly installed WSUS on Windows Server 2016, I am getting error on generating report.
I already have installed Report viewer but this issue persists.
Please find the attached error screenshot for the reference.

Someone please help me to resolve this issue.


Amit Kumar

Read other answers
RELEVANCY SCORE 64.4

I work for a charity and we often use a simple google search to get an idea of media coverage that we have generated. Does anyone know if it is possible to generate a report from the results of a google search?
Any tips gratefully received!
 

Read other answers
RELEVANCY SCORE 63.6

Here is my Perfmon report & Sysnativefilecollectionapp.
 
 
http://www.filedropper.com/perfmonreport
 
http://www.filedropper.com/sysnativefilecollectionapp

A:Perfmon Report/ Sysnative (Svchost.exe & Regsvcs.exe Trojan)

If infected, I'd suggest posting over in the Am I Infected forum:  http://www.bleepingcomputer.com/forums/f/103/am-i-infected-what-do-i-do/Please read the pinned topics at the top of the forum for instructions on how to post there.If there's another reason for this, please let us know. Please install Service Pack 1, then....Only 47 Windows Update hotfixes installed.  Most systems with SP1 have 350-400 or more.  Please visit Windows Update and get ALL available updates (it may take several trips to get them all).The actual number is not important.  Rather it's important that you checked manually, installed any available updates, and didn't experience any errors when checking or updating.You have a NETGEAR WNDA3100v2 N600 Wireless Dual Band USB Adapter:I do not recommend using wireless USB network devices.These wireless USB devices have many issues with Win7 and later systems - using older drivers with them is almost certain to cause a BSOD.Should you want to keep using these devices, be sure to have the latest W7/8/8.1/10 drivers - DO NOT use older drivers!!!An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.H: drive only has about 9% free space.  Windows likes 15% free space in order to perform stuff "behind the scenes" without adversely affecting the system's performance.  Please free up 15% on ALL hard drives (you can get away with 10% on larger drives and won't notice a l... Read more

Read other 1 answers
RELEVANCY SCORE 63.6

Every time I run System Diagnostics it collects the data for 60 seconds and then I am asked do I want to open or save this file:

report.html.

If I save or open it I am greeted with a blank webpage saying navigation cancelled and the System diagnostic screen still says generating report

Any thoughts on why this is happening?

A:Problems generating a report with System diagnostics

  
Quote: Originally Posted by frozenreads


Every time I run System Diagnostics it collects the data for 60 seconds and then I am asked do I want to open or save this file:

report.html.

If I save or open it I am greeted with a blank webpage saying navigation cancelled and the System diagnostic screen still says generating report

Any thoughts on why this is happening?



Check in event viewer by typing eventvwr in search. Look in windows logs, application tab.

You are looking for critical errors (they have red in the left column) that have app hang, app crash, or anything relating to the problem.

When you find them pplease note the event ID and source code and tell us what they are.

Let us know if you need help with any of these

Ken

Read other 7 answers
RELEVANCY SCORE 62.8

Hi, After upgrading from vista to windows 7 i tried to generate a system health report. now , i never had problems with this before, i ran the windows scannow in cmd and all is fine , i checked the performance and logs service and that was started and manual , the reports are being registered in the perflogs folder but the tool used to generate the report in HTML seems to time out and is incapable of generating a report like in vista before the upgrade. By the way i'm running 64 bit home premium windows 7 , asus P5Q motherboard and an ATI Radeon 4850 graphic card, Thanks for any help in solving this y:

A:Time-out error generating system health report

Well People, Just to give you some feedback, It seems that the in-place upgrade feature offered to migrate from vista to windows 7 has some flaws.This feature imports files which are somehow corrupted or modified ,which can result in a number of small "glitches".For myself i resolved this issue by doing a clean install and this was the fix.apparently some people do not think that the in-place upgrade should be available ,for this has created a number of small but annoying problems.Best RegardsGreg

Read other 2 answers
RELEVANCY SCORE 62.4

I'm always crashing. Not really when I'm playing a game... but when I'm browsing the web or away from the computer. I can't figure it out. I've ran BlueScreenView and it's said a few things like DRIVER_IRQL_NOT_LESS_OR_EQUAL and CRITICAL_PROCESS_DIED. Many of the crashes all seems to have ntoskrnl.exe errors in common.
 
Also, For some reason I can't get the PERFMON report to generate. The app keeps hanging and won't allow me to save as html. It says it only takes 60 seconds, but I've waited like 30 minutes. 
 
I want to submit this and the Sysnative report now in case I crash again. I will keep trying to generate the PERFMO report to upload as soon as I am able. 
 
 OS - Windows 8.1, 8, 7, Vista ? Windows 10· x86 (32-bit) or x64 ? 64 Bit· What was original installed OS on system? Windows 10· Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Retailer· Age of system (hardware) 1-3 Years (Custom Built)· Age of OS installation - have you re-installed the OS? 6 Months · CPU - i5 4690K· Video Card - x2 780 GTX Classified (SLI)· MotherBoard - MSI z97 Gaming 7· Power Supply - brand & wattage - EVGA 850W· System Manufacturer - Custom· Exact model number N/A· Laptop or Desktop? Desktop

A:Persisent Blue Screen Crash (Perfmon Report wont generate)

I've seen other posts where this was asked to be uploaded. So I'm trying to be proactive. Here's the Event Viewer Administrative Events Log. 
 Admin.zip   675.28KB
  0 downloads
 
For some reason I still can't get the PERFMON to generate any html file. Everything's greyed out. 

Read other 5 answers
RELEVANCY SCORE 62.4

Hi, After upgrading from vista to windows 7 i tried to generate a system health report. now , i never had problems with this before, i ran the windows scannow in cmd and all is fine , i checked the performance and logs service and that was started and manual , the reports are being registered in the perflogs folder but the tool used to generate the report in HTML seems to time out and is incapable of generating a report like in vista before the upgrade. By the way i'm running 64 bit home premium windows 7 , asus P5Q motherboard and an ATI Radeon 4850 graphic card,
Thank's for any help in solving this issue ,much appreciated

A:Time-out error generating system health report tool

Did you do an in-place Upgrade? Are there other performance problems?

You can try a Repair Install, but the cure for these kinds of failures of in-place Upgrading is a Clean Install.

Clean Install Windows 7

Read other 9 answers
RELEVANCY SCORE 60

Hello

I want to connect my Xperia Z5 to my Vaio Laptop (Win 7). The phone is detected and some drivers installed but not all. For many bluetooth peripherials no driver is installed (see attached pictures).
I have installed the Xperia phone Software on the Laptop.

What could solve my problem?
Thanks for any help!

Read other answers
RELEVANCY SCORE 59.6

I need to install driver for Bluetooth Dongle.



The seller which I bought it from said I need to download Blue Soleil Software.


download.weberp.com.cn - /driver/
and click bluetoothnew.rar

I downloaded the file and this is what it display.



So how is the proper way to install the driver for Windows Xp?

Which exe or msi file do I double click on to install proper driver for Windows Xp so my Bluetooth Dongle device will be recognzied on my p.c. and will work?

Do I install the software before I plugin the Bluetooth Dongle to usb port to my p.c. or plugin usb dongle, then install the software ?

What about if I wish to install driver for Windows 7. Do I install it the same way ?

Thanks

A:Installing driver for Bluetooth Dongle

Setup_.exe is what I would try first. That should open a setup wizard to install a driver.

Yes, it will be the same way for Windows 7.

Read other 2 answers
RELEVANCY SCORE 59.6

Hey.. Downloaded a driver from Broadcom to work with my BCM Bluetooth device, but the installation package (after the update process) says it failed to install.. Weird.. I have Vista Ultimate x64.

Thanks

A:Driver for bluetooth device not installing

Is the driver actually marked for use with a 64bit Operating system?

Read other 9 answers
RELEVANCY SCORE 59.6

Hello, thank you for the invaluable free service you're offering since so long!
I got a BSOD while installing the bluetooth driver; I'd like to know why and how to prevent other occurring pls.

Thank you.

A:BSOAD while installing the bluetooth driver!

Hello cypherinfo.

The BSOD is caused by Avast.

avast! Filtering TDI driver

Code:
fffff880`14c88118 fffff880`042b6469Unable to load image aswFW.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswFW.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswFW.SYS
aswFW+0x6469
Description here: Driver Reference Table - aswFW.SYS

avast! Virtualization Driver

Code:
fffff880`14c880b8 fffff880`04321059Unable to load image aswSnx.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.SYS
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.SYS
aswSnx+0x2c059
Description here: Driver Reference Table - aswSnx.SYS

3 months ago you had another BSOD, and avast! Firewall Core Firewall Service was the reason there.

Code:
fffff880`14a4b988 fffff880`017a6e6cUnable to load image \SystemRoot\System32\Drivers\aswNdis2.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswNdis2.sys
*** ERROR: Module load completed but symbols could not be loaded for aswNdis2.sys
aswNdis2+0x1e6c
Description here: Driver Reference Table - aswNdis2.sys

Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

You have 26 statrup items . Free up the startup. Windows does not need any ... Read more

Read other 1 answers
RELEVANCY SCORE 59.6

? OS - Windows 7 professional 64 bit service pack 1;
? x86 (64-bit)
? What was original installed OS on system: Windows 7 professional 64 bit;
? full retail version;
? Age of system: 13 months;
? Age of OS installation - have you re-installed the OS: 13 months no reinstallation;

? CPU: Intel Core i7-2670QM;
? Video Card: nVidia Quadro 1000M;
? MotherBoard: Hewlett-Packard 1631;
? Power Supply - brand & wattage: Hewlett Packard 45 W

? System Manufacturer: Hewlett Packard
? Exact model number: Product number: LY527EA#ABZ Elitebook 8560w
Hello, thank you for your invaluable free service you're offering since so long.
I got a BSOD while installing the bluetooth driver (picture): Share your adventures with your friends realtime
Below the error message:
"The computer has rebooted from a bugcheck. The bugcheck was: 0x00000019 (0x0000000000000020, 0xfffffa80000090c0, 0xfffffa80000090c0, 0x0000000004000184). A dump was saved in: C:\Windows\Minidump\082213-28251-01.dmp. Report Id: 082213-28251-01."
How to prevent to see it again pls?
Thank you.

A:BSOD while installing the bluetooth driver!

first Bump

Read other 3 answers
RELEVANCY SCORE 58.8

Hi,
I have bought Creative Sound Blaster JAM wireless headset (bluetooth enabled).
When I tried to pair it with my computer and laptop it gives the error for missing drivers.


Please do suggest how to make it workable.

Thank You

Read other answers
RELEVANCY SCORE 58.8

Hi,
I have bought Creative Sound Blaster JAM wireless headset (bluetooth enabled).
When I tried to pair it with my computer and laptop it gives the error for missing drivers.


Please do suggest how to make it workable.

Thank You

Read other answers
RELEVANCY SCORE 58.8

computer; HP 6710b
OS: Win7 Enterprise 32bit
RAM: 2GB

I am able to download the the driver, but it will not install. Am logged in as local administrator. Computer's Bluetooth driver has been updated ok. Am lost as to why the driver will not install. Please help...

A:Problem installing Bluetooth BlueAnt v9i driver

Hi Peter669,Welcome to the forums, Have a read of this excellent tutorial Driver Install - Device Manager

Read other 2 answers
RELEVANCY SCORE 58.4

Hello everyone

I recently upgraded my OS on my Acer Aspire AO751h-52Bw from Windows XP to Windows 8.1 and installed most of the drivers in Windows 7 Compatibiliy Mode. But i am stuck with the Boardconn Bluetooth Driver because when i click on it, Windows Compatibillity Center (or whatever it's called) tells me it cannot install due to incompatibility, I did search on Google to find a solution but i didn't find anyting useful. Am i doing something wrong or should i use my netbook without the bluetooth function?

Thanks in advance for your suggestions and sorry if my English is bad because i am typing this on my iPad an i live outside the UK and USA.

A:Problem with installing Boardconn Bluetooth Driver on Wind

Hi, please go the Bluetooth Software Download | Broadcom and download and install the latest Bluetooth driver.

Good luck, werty

Read other 2 answers
RELEVANCY SCORE 58.4

Hi guys,this is what I get when I want to install bluetooh driver on my g510 notebook windows 10 64 bit. picture:proplem

Read other answers
RELEVANCY SCORE 57.6

Hi ,

I have Dell Inspiron 3521 , i5, and I am having tremendous amount of trouble with Bluetooth audio.
I downloaded original drivers from dell website but facing same trouble. I found a lot of solution from Google but all are useless for me.
I have windows 7 64bit service pack 1
I am using this window with administrator user
Do others have the same issue? Any work being done on this?

A:Windows Encountered Problem Installing Bluetooth Audio Driver

Did this work at one time and now does not and the reason for installing the driver? Or has this never worked? It does make a difference.

Read other 3 answers
RELEVANCY SCORE 56

Hello, I am new here and this is my first post. Thank you for your time and helping me out!

My question is as this. Is it possible to monitor my GPU usage true perfmon? I can monitor CPU, HDD and RAM in perfmon but there are no counters for GPUs. How do I get counters for my GPU so that I can monitor my GPU usage. At the moment I monitor my GPU with Process Explorer. But I want to monitor it all in one window (thus perfmon).

This is my system:
MOMO: MSI Bing Bang X Power II
CPU: Intel Core i7 3820
RAM: 16 GB Corsair DDDR-1600 (2 x 8 GB) (CMZ8GX3M1A1600C10)
HDD: Western Digital WD2002FYPS (2 TB)
GPU: AMD Radeon R9 200 (4 GB)

Thank you for your time and I hope you have a solution,
Richard Moti

A:Monitor GPU usage in perfmon, GPU counter for perfmon

Hello RichardMoti and welcome to Sevenforums. What brand card do you have? Most manufacturers have a utility that will monitor your card on screen while you are playing. They also have other functions as well. If your manufacturer does not have one, many people like MSI Afterburner. It is an overclocking utility, but has very good monitoring stats. Most manufacturers have their own. I have an EVGA card and use Precision X, Sapphire has Trixx and most others do as well.

You can keep a log of almost every statistic there is with GPUz. This will tell you how Graphics Card Problems - Diagnose

Read other 3 answers
RELEVANCY SCORE 53.6

Brandnew HP Envy x360 with Belgian azerty keyboard The key 2 positions right to the spacebar, marked as <>\ does not generate those values, but generates the code for the CTRL key instead. This can not be a virus or other issue, as this is a "just out of the box" fresh system. I really suspect a "Bug" here in the testing of the azerty layout for this particular model The keyboard driver layout is the standard one provided with the OS by microsoft, called "Belgian Azerty decimal point"The operatings system is on the latest patch levelThe HP drivers are on the latest patch level I guess this must be declared as "a problem" and not an "incident" Cheers,Stefan

Read other answers
RELEVANCY SCORE 53.6

I'll try and make this concise: BSODs occur even while desktop is not in use. Memory_Management and PFN_LIST_CORRUPT is what I remember seeing.

Also: IE9, IE10 and IE11 all "stop working" randomly. Chrome - ditto. FF32 - ditto.

I've run Memtest86 (10 passes) no errors.

The last BSOD was deliberate insofar as I was running Driver Verifier. I'm not sure if I am posting in the right area since the browser crashes and BSODs may be two separate issues ... ?

Dump files(s) attached. Please let me know if I can provide any additional info and thank you in advance for any help with this.

Attachment 342090

A:BSODs while idle; Driver Verifier report report available

*bUmP* Any wisdom out there please?

Read other 8 answers
RELEVANCY SCORE 50.4

Does anyone knows whether the Acer Aspire 5253-BZ661 laptop has a built-in bluetooth device in it? Reading from articles on the internet, I don't see any information regarding this laptop's particular model having a built-in bluetooth device in it but has a bluetooth driver and suite ready for the download at the acer main site.

A:Bluetooth driver for Acer Aspire 5253-BZ661 but no bluetooth hardware?

May be a option on some models.

Read other 6 answers
RELEVANCY SCORE 49.6

I need to know whether the hardware and latest updated driver supports Bluetooth 4.0 or 4.1 (Bluetooth 4.1 was official approx. the same time this machine was purchased)It seems that HP bluetooth driver descriptions do not display this information (versions of bluettoh supported, and bluettoh profiles might also be nice). This machineCommon Name                                           HP Touchsmart Envy 17Product ID                                                     E9G82UA#ABABroadcom Bluetooth Driver:                 12.0.1.695 Rev.A TIA.  

Read other answers
RELEVANCY SCORE 49.6

If you are connected to 2.4GHz wifi, and connect a bluetooth mouse, the mouse seems to lose bandwidth, skipping around the screen when moving. If you toggle wifi off and on again, the issue goes away. If you connect the Bluetooth device AFTER wifi is connected, it works fine.
As I understand, this is a Dell-branded Broadcomm radio.

Dell wireless 1830 BT 4.1 LE w/new Surface arc mouse
BT driver version: 12.0.1.750
Dell wireless 1830 802.11ac on a 2.4GHz N network
Wifi driver version: 1.555.0.0

Read other answers
RELEVANCY SCORE 49.6

If you are connected to 2.4GHz wifi, and connect a bluetooth mouse, the mouse seems to lose bandwidth, skipping around the screen when moving. If you toggle wifi off and on again, the issue goes away. If you connect the Bluetooth device AFTER wifi is connected, it works fine.
As I understand, this is a Dell-branded Broadcomm radio.

XPS 15 9550
Dell wireless 1830 BT 4.1 LE w/new Surface arc mouse
BT driver version: 12.0.1.750
Dell wireless 1830 802.11ac on a 2.4GHz N network
Wifi driver version: 1.555.0.0

Read other answers
RELEVANCY SCORE 46.4

I downloaded the driver pack for the M710-q ThinkCentre for Windows 7 Pro x64 and imported the drivers to my MDT setup. However, when I deploy the image, I have an issue with the Bluetooth device in Device manager. It's throwing an error "Windows was unable to start this device." I downloaded the Bluetooth driver from the driver download page for this model PC, imported it into MDT, updated the deployment share, but I still have this error. I contacted Lenovo support and their suggestion was to reinstall the OS from installation media and closed my ticket immediately after. I have a stack of 30 computers that I need to deploy in the next month or so, but I can't deploy them with incomplete drivers. Is there anyone else having this problem, and is there a way to resolve the issue with the driver pack?

Read other answers
RELEVANCY SCORE 46

First problem:
For a couple of day my computer has been running a little hotter than usual, with the cpu being used at 25% when I am doing barely nothing. Lately now it also has been bluescreening me with the driver power state failure label
0.00...9f
0x00...4
0x00...258
and some more but my picture cut the rest off.

I don't know what driver is the issue and what to do

Second problem:
I was looking through my drivers and trying to update them with device manger, but oddly whenever I try to update a driver my computer tries to update my bluetooth driver. When that happens the driver isn't found on my computer and gives me an error msg.

Thank you.

A:Driver power state failure & Bluetooth driver is missing

New update: I figured out how to update drivers separately, and I updated Realtek PCIE CardReader, synaptics ps/2 port touchpad, Mirosoft virtual WiFi miniport adapter #1 & 2, virtualbox host-only ethernet adapter,

Read other 1 answers
RELEVANCY SCORE 44.8

i cannot find any drivers for bluetooth controller and pci device

A:bluetooth controller driver and pci device driver for hp 15 ...

 Hi, PCI:http://ftp.hp.com/pub/softpaq/sp69501-70000/sp69592.exe Bluetoothhttp://ftp.hp.com/pub/softpaq/sp65501-66000/sp65805.exe If they do not work, attach the Hardware IDs, check: How to easily find drivers for Unknown Devices in Windows

Read other 1 answers
RELEVANCY SCORE 44.8

i cant find driver for my Broadcom Bluetooth...kindly help me.. thankful to you... Hardware ID isUSB\VID_0A5C&PID_216C&REV_0112 Regards.. 

A:Driver for Broadcom Bluetooth Driver (BCM 43142AO

Hi: You need this driver... This package contains the Broadcom Bluetooth driver for supported notebook models that are running a supported operating system. Broadcom Bluetooth Driver is required to enable Broadcom Bluetooth devices. File name: sp68373.exe

Read other 3 answers
RELEVANCY SCORE 44.8

My Bluetooth Driver and Copy Driver is not installed. Any suggestion??

A:Bluetooth driver and Copy driver not installed

Hi Faiz
did you visit this site?:

Acer Support: Downloads & Support Documents - Notebook / Aspire / Aspire 4736Z

Good luck

Read other 9 answers
RELEVANCY SCORE 44.4

Pretty much what the Tittle said. I have a Toshiba Satellite L300-16L Laptop with 3GB ram upgraded, it was originally running Win Vista then i upgraded it to Ubuntu 12.10 but my mum though that windows is more suitable for her so she asked me to replace Ubuntu with Win 7. So during the installation of win 7 i chose to "upgrade now" and i was brought to the compatibility page saying ""This computer started using the installation disc. Remove the disc and start Windows normally, then insert the disc and continue the upgrade" and could not carry on the installation. i did some research and found few forum thread such as "this". I followed some solutions that poeple posted on the thread (uninstalling drivers and 3rd party programs) but still to no avail. please help me.

I appreciate any guidance you can give me.

If you need any more information, please just ask.

Thanks so much,
-NG

A:Compatibility report when installing Win7 on Ubunto OS laptop

You are supposed to choose the 'Custom' option and NOT 'Upgrade' during installation. Upgrade option works when you need to upgrade an older version of Windows such as Vista from within Windows.

Hope this helps.

Read other 6 answers
RELEVANCY SCORE 44.4

hi!

im having trouble installing my belkin wireless g router. when im installing the install cd i keep gettin an error report i have tryed manny times to install it abd i have rebboted my laptop multiple time this as not helped.
was wundering if any 1 could help with this problem.

thaks
luke


Easy Install has encountered a problem and needs to close. We are sorry for the inconvenience.

Read other answers