Over 1 million tech questions and answers.

Trouble with Wake on Ring, Wake on LAN and Standby - Sleep - Suspend

Q: Trouble with Wake on Ring, Wake on LAN and Standby - Sleep - Suspend

I have a Dell Optiplex 755 with WinXPPro SP3, 2GB RAM and an Intel Core 2 Duo E4600, and it is unreliable for Wake on LAN and Wake on Ring. I also wonder whether my Standby - Sleep - Suspend (S1 or S3) is working correctly.

When the PC is in Standby - Sleep - Suspend mode (S1 or S3), Wake on LAN and Wake on Ring work some of the time but not all of the time, and I'd like them to be 100% reliable.

These may be two different problems, but your advice will be appreciated. (Also, if I should post in a different forum, please advise.)

My Network Card is an Intel 82566DM-2 Gigabit Network Connection, and I recently upgraded its drivers using "generic" PROXP.exe from the Intel website, although this has not helped the problem. The specific driver file e1e5132.sys is now from 2009 -- it used to be from 2007. But, as I say, Wake on LAN from Standby was not and is still not reliable, both before and after the driver update.

In Settings .. Network Connections ... Local Area Connections ... Properties ... Configure ... Power Management, all the Wake on LAN options are checked ON:

- Wake on Directed Packet
- Wake on Magic Packet
- Wake on Magic Packet from Power Off State
- Wake on Link

The NIC card's Diagnostic checks are all OK.

My fax modem card is a Conexant D850 PCI V.92 Modem, and I have the most recent drivers dated 7/27/07, version 7.67.0.50. In Settings ... Phone and Modem Options ... Modems ... Properties, "Allow this device to bring the computer out of standby" is checked ON. The MS fax service is configured to answer on zero or one rings.

And I have the same problems regardless of my Screensaver or Power Management settings. (The PC is NOT set to go into Hibernate ever. I have experimented with various settings for Standby, Monitor Off and Hard Disk Drive off, but the problem stays the same regardless, and also appears if I put the PC into Standby manually.)

My Dell BIOS version is A15, the latest for this PC. I have a choice of S1 or S3 for Standby, but the problems are the same regardless which one I choose.

What to do? If it's a BIOS problem, how can I fix?

Another post suggested I stop using ACPI for Power Management and let Windows run Power Management. However, there is no choice in Settings or the BIOS to do that, at least none that I have found.

More symptoms: On this PC I also have LogMeInFree version 4. Just recently, the problems with Wake on LAN and Wake on Ring seemed to go away, but I noticed that the PC was no longer really going to sleep during Standby. When this Dell is in Standby, its power light should blink. I saw that the light would start blinking but then go solid again, and although the monitor stayed dark, the PC certainly "felt" awake. So, I checked some of the log files in LogMeInFree and saw indications that LogMeInFree was reaching out for power every few seconds over and over. So all this past weekend, I exited out of LogMeInFree, saw the PC go into GOOD standby (blinking power light) but my Wake on Ring problem came back. I think the LogMeInFree problem is separate and had the perverse result of hiding my Wake on Ring and Wake on LAN problems, which return when LogMeInFree is off, but thought I'd let you know.

Thanks for your thoughts.

RELEVANCY SCORE 200
Preferred Solution: Trouble with Wake on Ring, Wake on LAN and Standby - Sleep - Suspend

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Trouble with Wake on Ring, Wake on LAN and Standby - Sleep - Suspend

More to above: Dell has suggested I must re-install Windows. I've never done that, and I realize I'd probably lose all my applications and data - no good. Seems to me that's like using an atomic bomb to kill a mosquito. And why should I assume that will work?

But is there a way to re-install -- or maybe fix -- Windows that leaves everything else safe?

FYI - About a month or so ago, I ran SFC (System File Checker) in repair mode, and that didn't help with this problem.

Any ideas?

Read other 1 answers
RELEVANCY SCORE 141.2

When my WinXPPro SP3 machine is in sleep/standby/suspend mode (S1 or S3), the fax modem wakes the machine some of the time but not all of the time. I want it to wake the PC every time, with 100% reliability. (When the PC is up and running, the modem and the machine receive faxes beautifully.)

What do you suggest?

Modem: Conexant D850 PCI V.92 Modem with recent driver update to version 7.67.0.50 (7/3/2007) (but this problem is the same now as before with the 2004 driver version)
PC: Dell Optiplex 755
Processor: Intel Core 2 Duo E4600 @ 2400 MHz
RAM: 2GB, of which 1.4GB is usually free
BIOS: A14
OS: WinXPPro SP3 with all updates
AV: Avast Home Free
Anti-spyware: SpywareBlaster Free, Spybot S&D Free and AdAware Anniversary Free
Fax software: MS Fax Console that comes with WinXPPro SP3
Printer/Fax Printer: HP OfficeJet Pro 8500 Wireless AIO (model A909g)
Screensaver: XP logo after 9 minutes; do NOT show welcome screen on resume
Power Settings: Home/Office Desk; Turn Off Monitor after 10 mins; Turn Off Hard Disks Never; System Standby after 20 mins; System Hibernates Never; Do NOT prompt for password when computer resumes from standby
Home network Ethernet connection: Intel(R) 82566DM-2 Gigabit Network Connection card with all Wake on LAN settings ON.
Browser: Firefox latest but use IE occasionally when necessary
Email: MS Outlook Express 6 to POP3/SMTP email service
Misc: I also run LogMeInFree version 4 on all my home computers

Thank... Read more

A:Wake on Ring problem - Fax modem fails to wake PC reliably from standby

I may not be able to help, but I am curious - is this a dedicated telephone line?

If not, what services do you use, like call forward, messaging, call waiting, etc.

Or does the dedicated line have anything like that that you know of? (or didn't know of)

Read other 9 answers
RELEVANCY SCORE 140.8

When my WinXPPro SP3 machine is in sleep/standby/suspend mode (S1 or S3), the fax modem wakes the machine some of the time but not all of the time. I want it to wake the PC every time, with 100% reliability. (When the PC is up and running, the modem and the machine receive faxes beautifully.)

What do you suggest?

Modem: Conexant D850 PCI V.92 Modem with recent driver update to version 7.67.0.50 (7/3/2007) (but this problem is the same now as before with the 2004 driver version)
PC: Dell Optiplex 755
Processor: Intel Core 2 Duo E4600 @ 2400 MHz
RAM: 2GB, of which 1.4GB is usually free
BIOS: A14
OS: WinXPPro SP3 with all updates
AV: Avast Home Free
Anti-spyware: SpywareBlaster Free, Spybot S&D Free and AdAware Anniversary Free
Fax software: MS Fax Console that comes with WinXPPro SP3
Printer/Fax Printer: HP OfficeJet Pro 8500 Wireless AIO (model A909g)
Screensaver: XP logo after 9 minutes; do NOT show welcome screen on resume
Power Settings: Home/Office Desk; Turn Off Monitor after 10 mins; Turn Off Hard Disks Never; System Standby after 20 mins; System Hibernates Never; Do NOT prompt for password when computer resumes from standby
Home network Ethernet connection: Intel® 82566DM-2 Gigabit Network Connection card with all Wake on LAN settings ON.
Browser: Firefox latest but use IE occasionally when necessary
Email: MS Outlook Express 6 to POP3/SMTP email service
Misc: I also run LogMeInFree version 4 on all my home computers

Thanks.

A:Wake on Ring problem - Fax modem fails to wake PC reliably from standby - how to make 100% reliable?

Please see more details (and post your reply) at http://www.bleepingcomputer.com/forums/ind...hl=wake+on+ring(By the way, I'm up to BIOS A16 but does not help.Thanks.

Read other 1 answers
RELEVANCY SCORE 115.6

W7 PC wakes up from sleep every few minutes. It didn't use to. I am the builder / owner / sole user. Investigation done so far at the DOS prompt to establish the cause:

powercfg -devicequery wake_armed
(no results returned)

powercfg -waketimers
There are no active wake timers in the system

powercfg -lastwakeWake History Count - 1
Wake History [0]
Wake Source Count - 0Other ideas to try and establish the cause with please?

Many thanks.

Read other answers
RELEVANCY SCORE 105.6

My PC is fairly new and I'm having problems with slow shutdowns/restarts and slow sleep/wakes. Recently it seems to fail waking altogether and restarts after a while instead. Usually during waking I just have a black screen for a long time before the reset/restart but sometimes I see the Windows log-in screen but it's unresponsive.
The problem predates my CPU undervolting and doesn't seem to change when I switch RAM settings back to Auto instead of XMP (I my RAM necessitates some kind of overclock in order to function at its rated speed).

Can anyone advise how to proceed? Thanks.
System specification below. This forum has a fantastic design that eliminates the form of pasted lists of information. That's just great for preventing people from reading it. I was worried someone might have read this information.
OS: Win 10 Pro 64-bitMainboard: ASUS Z170 Pro GamingCPU: Intel i7 6700 (6th gen), Stock HSF, Undervolt Offset -0.15 V, LLC 4RAM: Corsair LPX Vengeance 2x8GB DDR4-3000 (CMK16GX4M2B3000C15)Graphics: Gigabyte NVIDIA GeForce GTX 950Sys Drive: Samsung Evo 750 SSD, 250 GBData Drives: OCZ Vertex 2 SSD, 60 GB; WDC WD1002FAEX-00Y9A0, ~1 TB; WDC WD2003FZEX-00Z4SA0, ~2 TB; WDC WD2002FAEX-00MJRA0, ~2 TB; RAID 0, ~300 GB [Maxtor 6B160MO x 2]PSU: XFX TS 750W (P1-750S-NLB9)Bluetooth: Parani UD100 Bluetooth USB AdapterMonitor: LG 21.5" W2246S-BF 16:9 Wide LCD Monitor 1920x1080 5msLogitech G500 mouse, K120 keyboard.UEFI BIOS divergence from optimised default settingsAI Overclock Tune... Read more

Read other answers
RELEVANCY SCORE 105.6

I have a R30208DY Desktop PC running Windows 10 in 64 bit mode with a VGA monitor and an HDMI monitor connected to the motherboard. All was fine until my Intel Graphics driver was updated. After this the VGA monitor failed to wake up after sleep. I spent some time several months ago with assistance of the Intel support forum investigating this. It happens even if I run with the HDMI monitor disconnected. I tried numerous versions of the Intel drivers, but the only version that works after 4300 is 4424. I decided to try periodically to see whether newly released drivers have solved the problem, so have just downloaded the latest drivers from the Intel site and from the Lenovo site and found that they still have this problem. I can reinstate the 4424 driver if it gets inadvertantly updated, but would like to think that someone at Intel recognises that there is a problem and is looking to provide a new version that repairs it. Is there any feedback to Intel from this support forum to initiate this process?

Read other answers
RELEVANCY SCORE 103.2

Hi,

I am new here. Hoping someone can help me out with this issue. I work in IT so am not a complete computer bonehead and am at my wits end with this.

My laptop is about 4 years old, it's a toshiba. For whatever reason, it started taking 5+ minutes to wake up from sleeping. If it sleeps for an hour, it's OK.. but if you leave it sleep all night and try to wake it up in the morning, it's quite cranky. After the 5+ minute wake up, it performs as normal. It was running Windows 7 Home 32 bit.

Troubleshooting steps that I have taken are as follows.

Reinstalled windows. Issue was resolved! but after about 2-3 weeks, issue came back. I thought maybe it was some type of windows update, so I reinstalled windows again and paid closer attention to the updates. Issue presented itself again after 2-3 weeks, and there were no updates immediately done prior to it starting.

I started to think maybe it was something related to my hard drive, so i performed laptop surgery and swapped out my original hard drive with a solid slate drive, and installed windows 7 Ultimate 64 bit (this laptop can support 64 bit so I figured why not upgrade.).

issue again was resolved for a few weeks, and now it's back to taking 5+ minutes to wake up again.

If you're turning the laptop on from scratch, it takes 10-15 seconds tops. if you're restarting, it's 10-15 seconds tops (man, I love SSD...)... if you're waking itup within the hour, its 1-2 seconds. But anything longer then that, 5+ minutes.

It ba... Read more

A:Laptop extremely slow to wake up from sleep mode, 5+ minutes to wake

Hi there, have you ran any malware/anti virus scans?

Read other 9 answers
RELEVANCY SCORE 93.2

hi , all

Arrrghh
Another problem.
How to disable wake on ring , when using an external modem.
In bios, wake on ring is disable yet machine wakes when the phone rings.

Thanks in advance
 

A:wake on ring (external modem)

Read other 14 answers
RELEVANCY SCORE 92.4

Asus Zenbook ux301LA, i5 Haswell, Intel graphics 4000 Win 8.1 x64. It came with Win 8, I updated to 8.1

After wake from suspend scaling is way off, everything is tiny... I figured it might be the video driver so I went to Intel and used their detect utility and I downloaded the exe, ran it and it said not compatible, go to the PC mfg. Asus does not list any graphics drivers for 8.1, only 8. So I can't use suspend, must do a full shutdown and restart. How can this be fixed? Can it be fixed?

A:[SOLVED] scaling problem after wake from suspend

See if adjusting the DPI scaling helps at all> [Fix] Bold, Blurry or Hard to Read Font Problem in Windows 8.1 - AskVG

Uninstalling the video driver and reinstalling may help but I suspect there's more to this issue.

Read other 11 answers
RELEVANCY SCORE 91.2

I have tried to update/remove/modify the video graphics driver and that didn't work nor changing the energy plans did any good. So is there a fix that someone knows it definitely works?

Read other answers
RELEVANCY SCORE 86

yes, another question on this common topic. i searched the archives, but couldn't find a topic that was exactly like mine/supplied an answer.

i have winxp pro. standby works fine if comp is in standby for a few minutes, but won't wake up after 30 min. or so. no response at all. no h.d., no monitor, etc. i have to shut off and reboot.

all power management settings are set to 'never', except for the "computer sleep" button (which is actually on the keyboard) which is set to 'standby'. in the bios the only power management setting is what to do in the event of power failure: either 'stay off' or 'reboot'. i have had it set to 'stay off'.

so, any ideas why standby won't awaken after extended time?

thanks.
 

A:won't wake from standby

perhaps i should add that this is a desktop, hp, with amd processor.
 

Read other 3 answers
RELEVANCY SCORE 86

Is there any way to DISable wake from standby for a PS2 mouse? I would prefer having to strike a key to wake up my computer. Right now, sometimes even bumping my desk causes my PC to wake up. Thank you!
 

A:Wake from standby......

Look in the BIOS set-up. There is an option there under Power saving.
 

Read other 1 answers
RELEVANCY SCORE 86

Problem is I can't wake computer from standby. It goes to standby when I press the button marked "sleep" but will not wake up when I press the "wake up" button. I would be grateful for any advice . Thanks!

A:can't wake from standby

u have to be a bit more elaborate with your explanation. does the whole system actualy wake up ? can u hear fans spinnin HDD working lights on keyboard/mouse/PC leds? but nothing on the screen?

if thats the issue one other member here i just read about said it was his graphics card drivers..he rolled back one and problem seem to have gone.

with me, i started having that same problem with my older comp. it wouldnt wake fully from standby like mentioned above...screen black. but this only happened after i installed a new PSU. and updated to drivers to my card. then i started to get CMOS errors on startup and couldnt even reset BIOS or anything...5year old Mobo....so i abandoned and build a new machine..

only thing i carried over was my PSU (Antec Earthwatt 500) rest is all new. with XP home sp2. i had this problem once and it was even worse..

my system was attempting to start from standbuy ..(Lights on an everything) but after 6sec or so it would shut down (or go back to stanby) briefly -for 2 secs- then start back up...then off then on again..it kept doing this till i manually reset it....no errors no nothing.

hasnt donne it again since then. but i switched my PSU cause according to PSU calc i need 490W and im at 500max with the Antec. since im going Crossfire ill get a 750w+.

Read other 2 answers
RELEVANCY SCORE 86

I just added a MS wireless keyboard. Is there a way to wake up the Portege from standby from this keyboard? Now I have to open the lid and use the power button on the notepad. Before, I had settings that put the notepad in standby when I closed the lid. I changed that setting to do nothing when close the lid.

The notepad is set to go to standby after 15 minutes of non-use. This works fine but when I want to use it again I can't find a way to wake it up without opening the lid and using the power button.

A:Wake Up From Standby

I have read your posting 5 times now and I believe I have understand what you wrote but I am asking myself how you want to work on your Portege if you do not want to open the lid????:|

> …I can't find a way to wake it up without opening the lid…
You want to use notebook with closed lid or what? Do you use external display?

Read other 2 answers
RELEVANCY SCORE 86

How to use power from USB port while it goes to standby/suspend mode. When I go to device manager- USB root hub- right click - properties -power management tab, the option "allow this device to wake computer" is inactive. But "allow this computer to turn off this device to save power" is active and unticked.

A:Make USB port powered while suspend/sleep/standby

The OS doesn't have that kind of control over the hardware. The USB port in question has to be setup in the hardware for this particular application. You need one of these:

USB - Wikipedia, the free encyclopedia





Sleep-and-charge USB ports can be used to charge electronic devices even when the computer is switched off. Normally, when a computer is powered off the USB ports are powered down, preventing phones and other devices from charging. Sleep-and-charge USB ports remain powered even when the computer is off

Read other 1 answers
RELEVANCY SCORE 85.2

ty for trying to help, but it didnt work, all was disabled, . see the main probleming im having is that for NO Reason, the pc goes to standby, (and i have check temp shutdown and thats not causing it). i have tried to over-ride this by prompting pc to ask me first, then i hit cancel when pc wants to standby. but after 3 or 4 times it shuts down and restarts pc. sometimes it restarts 2 or 3 times be i can run pc again. im running full ver. of win xp
 

A:disabling Wake-on-LAN. (pc goes to standby)

Read other 8 answers
RELEVANCY SCORE 85.2

Hi,

Basically my PC is refusing to wake itself up from hibernation (or standby) as it has done in the past. It seems like the actual task I schedule to run DOES run, but the PC stays in either hibernation or standby mode and doesn't bring itself to life. I've tried searching the Net but I haven't had any luck finding a solution so I thought I'd ask here!

I did have to restore my C: drive from a backup a few weekends ago as I installed Kaspersky AntiVirus and it basically made my PC unusable so I ended up formatting the C: partition and restoring it from my backup (going back to avast! in the process). However everything else seems to be working OK so I don't know why it's refusing to wake itself up! :-(

I'm only doing what I used to - using Scheduled Tasks and ticking the box 'Wake the computer to run this task' - but it's not working. The same tasks run fine while the PC's in 'normal' mode and my laptop has no such problem waking itself from hibernation either.

I really need to get this fixed in the next week as I go away on holiday on Friday and want to use the PC to record programmes while I'm away.

System details as follows:

Hardware: Athlon 64 X2 Dual Core 3800+ 2.00 GHz, 2 Gb RAM, NVIDIA GeForce 7600 GS, ASUS M2N32-SLI Deluxe ACPI BIOS Revision 0706 (21/08/2006)
Operating system: Windows XP Home SP2

Any help would be greatly appreciated as I'm thoroughly stumped at the moment!

Thanks
Steven

A:PC won't wake up from standby or hibernation any more...

Do you have an error message of some sort when you try to get out of the hibernation ? I only found this link on microsoft database about that kind of problem, don't know if it will help :
http://support.microsoft.com/kb/894896/en-us

Maybe you could also try to disable hibernation, reboot the computer then reenable it.

Read other 7 answers
RELEVANCY SCORE 85.2

OK I sure hope I am posting in the right area. Anyway, I will continue with my problem.

So, a few days ago, my Crucial RAM decides to have issues so I have to replace them (went to NCIX and they exchanged them no problem). Later that day, everything was working fine so I was quite happy. Now a few days ago, I was in Vista 64bit, and the PC automatically went to sleep when I was asleep. However, when I tried to turn it back on, it wouldn't come out of its sleep and I had to restart the PC with a message on the bios saying "Last BOOT failed! Something about POST something lol" So I thought to myself just to load set up defaults. Then I booted into XP no problem. Now yesterday, I had my PC on all night, then I woke up this morning to see that my mouse wasn't making my monitor come out of standby. So I wondered what could be the issue and decided to restart the computer. ALL OF A SUDDEN, I hear this long beeeeeeeeep that didn't stop until I shut down the PC! I almost ripped my hair out at this point. So I tried a few times to boot it, and eventually got it to almost boot to XP except got BSODed with 0x00000044. So I cleared CMOS by removing the battery and doing all that jazz. It seemed to be fine until later when I was in XP, I got the 0x0000007E. So I ran memtest86 and there were no issues. I tested each of my video cards individually, tried removing the sound card, checked all my temperatures... but nothing at all. I ALSO got the message on the bi... Read more

A:PC won't wake from standby plus other things

for 0x0000007E error goto and see u done anythin wrong http://support.microsoft.com/kb/330182

for BIOS ROM Checksum Error,try replacing with a new battery....but also refer to this,may be some serious prblm
http://www.pcguide.com/ts/x/sys/booterrGBER03-c.html

Read other 7 answers
RELEVANCY SCORE 85.2

To start with, I have already read on this forum dozens of threads and replies dealing with this issue.
My problem is, more or less, the same, but let me give a little bit more detailed picture.

1) At first, my computer wouldn't even go to standby and hibernate (Windows 2000), giving an error message that the driver on the standard keyboard is preventing machine from entering standby.
I've tried so many things, updating the drivers and so on, but nothing helped, until I accidentally bumped into an article listing software which, when installed, could be causing this problem.
In my case, it was Adobe Fonts. The moment I uninstalled it, the machine started going into hibernate and standby without any problems. However, although I haven't had any problems with the hibernate feature, the machine would stubbornly be refusing to awake from standby.
So, at this point, you guys there sweating with updating the drivers over this problem, know that this might have nothing to do with updating the drivers, it could very well be one of the software on your machine, causing it. Unfortunately, I can't find this article anymore. Has anybody else seen it, by any chance?

2) Unfortunately for me, a few days ago I installed an incredibly stupid program for encrypting Emails (PGPfreeware 7.0.3 ) which adds on some absolutely irremovable network drivers, completely preventing the PC from browsing and sending / receiving messages. http://download.com.com/3000-2144-4880518.htm... Read more

A:Can't wake up PC from standby mode

Read other 7 answers
RELEVANCY SCORE 85.2

Hello,

Second time posting here. 1st time was successful

The problem I've got now is that my monitor refuses to wake from standby mode anymore. Been running the system 24/7 for long time, in and out of standby, with no trouble, then it started as intermittent issue a couple of months ago and now appears to be perminently unable to wake up. I am forced to cold boot the power button on CPU and restart. I have checked power management settings - tried changing them - and still no go. The CPU will wake fine but the monitor stays in "power saving mode" (amber light on front panel). I've tried deleting the monitor in device manager and restarting but still no luck.

Any ideas? Could this possibly be a video driver issue?

Thanks
 

A:Monitor won't wake from standby

Read other 7 answers
RELEVANCY SCORE 85.2

im setting up a computer which goes on stand by at a certain time.. i then need to wake it up at a later time.. i tried using scheduled task and enable it to wake up the computer when it runs.. the program runs but the computer (monitor) doesn't wake up unless i press another key.. all the processes needs to be automated since the computer would be using a map program for a local mall.. any help would be appreciated.. the computer has 512mb ram running on 1.8Ghz with XP Pro Sp2..

A:automatically wake up from standby..

Hi hatake19

Maybe this program could help :
http://wakeuponstandby.www-dennisbab....qarchive.org/
(you don't need to enter your e-mail address to be able to download it)

Read other 2 answers
RELEVANCY SCORE 84

Hi.I m using Win 7,the problem is my pc could not wake up standby or hibernate.I didnt have this problem when i was using Win XP,but this problem came up when i switched over to win 7.I tried pressing keys n mouse clicks but in vain..my friend told me to change some setting in the bios called S1 S2 states,i did but still my pc wouldnt wake up..plz help me find a solution to this problem

Here are my system configuration
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: AMD Sempron(tm) Processor 2600+, x64 Family 15 Model 44 Stepping 2
Processor Count: 1
RAM: 959 Mb
Graphics Card: VIA/S3G UniChrome Pro IGP, 64 Mb
Hard Drives: C: Total - 20002 MB, Free - 8357 MB; D: Total - 20002 MB, Free - 9767 MB; E: Total - 13288 MB, Free - 5411 MB; F: Total - 10001 MB, Free - 7330 MB; G: Total - 13013 MB, Free - 9762 MB;
Motherboard: MICRO-STAR INTERNATIONAL CO., LTD, MS-7142
Antivirus: None
 

Read other answers
RELEVANCY SCORE 84

Hi, and thanks in advance for your help! I'm using Windows 7 64 bit.

My computer is several years old, and just a few weeks ago started having a problem waking from standby. Up until now, it had no issues going into and coming out of sleep.

Now, whenever it goes to sleep (whether due to inactivity or putting it to sleep manually), it won't wake up. The lights come on, the fans come on, but the monitor stays in standby. I've looked around online and found that many people get a black screen when booting up, i.e. the monitor comes alive and they may get a mouse cursor, but that's not what's happening to me. I don't get a black screen--my screen is never getting a signal from the computer. I have to do a hard reset, after which I get the 'Start Windows Normally' screen.

I've tried uninstalling and reinstalling the graphics drivers, changing hybrid sleep settings, using hibernate instead of standby, uninstalling random programs, etc, to no effect. I don't think I had any major windows or driver updates that caused it.

Any ideas??? It's driving me crazy. I'm getting to the point of trying a clean windows install... but what a pain that would be.

Thanks for any help you can offer!

A:Computer won't wake from standby/hibernate

Bueller? Hate to think that I've got to go to the extreme of wiping everything, but I'm out of ideas...

Read other 1 answers
RELEVANCY SCORE 84

I have a WINBOOK TW700 tablet running Win-8.1.  The device supports Connected Standby mode rather than Sleep State S3.  However, the Task Scheduler doesn't wake the device at the appointed time even when the "Wake the PC to run this task"
box is checked.  Since S3 isn't supported, there is no Sleep line-item within the Power Options dialog from which to check "Allow Wake Timers."  So my question is this: Is it possible to configure the device so that a scheduled task can
wake the device from Connected Standby and, if so, how do I do that?  Thanks,
cw

Read other answers
RELEVANCY SCORE 83.2

Dear All,
I have installed XP on HP dv5t laptop.It seems laptop doesn't wakeup from standby mode, I tried every other key with function key including display key but no luck, must do hard reboot. Does anyone has any idea how can i fix this?
Rgards
Girish
 

A:HP laptop dv5t does not wake up from standby mode

You could try going into the BIOS to see what wake up events are enabled and make any necessary changes.
 

Read other 1 answers
RELEVANCY SCORE 83.2

It's not clear to me what 'Wake by Thunderbolt' (hereafter WbT) does and whether or not it's required for 'Wake On LAN' (hereafter WOL).  In the T470s and T480s user guides, there's no mention that WbT is required for WOL so I'm thinking it's not.  But then again, since Ethernet is in the dock itself, and seeing how there are controls for PXE, I could see how it might be required. ReferencesT470s User GuideT480s User Guide

Read other answers
RELEVANCY SCORE 83.2

Hello. I'm looking at this laptop: http://www.dell.com/us/p/inspiron-15-3542-laptop/pd?oc=fncwg2327b&model_id=inspiron-15-3542-laptop

I would like to know if it has wake on LAN and wake on RTC or not.
 

A:Solved: Dell Inspiron 15 3000 Series - Wake on LAN & Wake on RTC?

Since I did not get an answer here, I went ahead and ordered the machine anyway, and took a chance. It does NOT have either feature in it.

It passed my other tests, so I'm keeping it and the next computer I get will probably have both of those features, but for this one, I guess I'll live without, since the network isn't finished to the point where I could actually use it anyway yet.
 

Read other 1 answers
RELEVANCY SCORE 82.4

Long story: Same hardware previous installation of XP suddenly stopped functioning when wife would log in at console, but would function fine via Remote Desktop. Her account was an Administrator account, but the 3rd account created overall after "Administrator" and my own account. If she logged into the console the desktop would function for some random amount of time, typically less than 10 minutes, and then suddenly the display would go into standby and nothing short of a hard reboot would bring it back. If I logged inat the console there was no problem, I could sit using the desktop for hours with no sign of standby.

To resolve the issue I finally resorted to a fresh install of XP SP3 on a new HD. I created teh user account in the same sequence 1. Administraot (Created by default) 2. Me 3. Wife
Now on a fresh install with all post SP3 patches installed, and only drivers from Windows Update the machine is exhibiting the same behavior. Any account I create as an administrator, other than my own, will run at teh console for some short amount of time and then the display goes into unrecoverable standby. Some of the time when this happens it is merely the display being nonresponsive and I am able to log in via Remote Desktop to my account, not her's, and operate normally. Other times it acts as if the entire machine went into standby but the system does not power off all the way, system LED still lit but otherwise no response at console or via network.

Attac... Read more

A:Secondary Admin Account -> Display won't wake from standby

This behavior of the new install is persistent across two ATi driver versions:

Driver Version: 6.14.10.6462
Driver Date: 3/23/2004


And the latest from ATi/AMD

Driver Version: 8.591.0.0 Part of Catalyst 9.3 released 3/18/2009
Driver Date: 2/25/2009

Read other 1 answers
RELEVANCY SCORE 82.4

Hi,
Could someone please help me with this strange issue?
When my machine was waked up from standby I found my wireless network was not connected. And I also found that wireless adapter was missing from my network connections window.
After I did a reboot of my laptop, wireless adpater was back in network connections.But wireless network was not connected and I found that Power management tab was missing under device manager tab of wireless adapter. I understood that this is in someway related to S3 issue, but not sure how to get my network back.
Kindly help me in resolving this issue.
Thanks in advance.

A:Wireless adapter issue after laptop wake up from Standby

  
Quote: Originally Posted by Nandhini


Hi,
Could someone please help me with this strange issue?
When my machine was waked up from standby I found my wireless network was not connected. And I also found that wireless adapter was missing from my network connections window.
After I did a reboot of my laptop, wireless adpater was back in network connections.But wireless network was not connected and I found that Power management tab was missing under device manager tab of wireless adapter. I understood that this is in someway related to S3 issue, but not sure how to get my network back.
Kindly help me in resolving this issue.
Thanks in advance.



Are you connecting to the network via a router?

Read other 3 answers
RELEVANCY SCORE 82.4

Not sure if this is an XP issue or with the chipset/MOBO. I've never encountered a computer that would not wake from standby by pressing a key on the keyboard or moving the mouse.

Anyone know how to get it to do so? SiSoft Sandra says this is an HP VLi8, and that the chipset is an Intel 82443BX/ZX 440BX.

I'm using a PS/2 KB and a PS/2 mouse on it. A USB KB does the same thing...no wakey.
 

A:old HP Vectra will only wake from standby by pushing the power button

aerotive said:

Not sure if this is an XP issue or with the chipset/MOBO. I've never encountered a computer that would not wake from standby by pressing a key on the keyboard or moving the mouse.

Anyone know how to get it to do so? SiSoft Sandra says this is an HP VLi8, and that the chipset is an Intel 82443BX/ZX 440BX.

I'm using a PS/2 KB and a PS/2 mouse on it. A USB KB does the same thing...no wakey.Click to expand...

Hey,

If you go into Control Panel > Keyboard > Hardware > Properties > Advanced Power Management, do you have a checkmark next to the box that says "Allow this device to bring the computer out of standby"?

This should be enabled by default, but just in case it isn't....

Otherwise, you could go to the HP website and see if there is a BIOS update or other software patch available that might correct this problem; Could also check their support documentation to see if this problem is discussed.

I know that some older machines do not support ACPI, so that might also be the case...
 

Read other 1 answers
RELEVANCY SCORE 82

I have the Dell XPS 13 9360 and have been using the Dell USB type-C adapter to connect to wired Ethernet network. I have a problem when waking up the laptop from suspend. VGA and USB on the adapter continue to work well after wake from suspend but the Wired Network functionality of the adapter is not recognized.
Note that if I unplug and replug the adapter it is recognised correctly.
The adapter is using the driver r8152 for wired networking, I am using Linux Mint 18.1 (Ubuntu 16.04 based) and kernel 4.8.0.34
Besides this I think almost everything works perfect with the laptop
I am also attaching the content of dmesg after I wake up from sleep:
[16815.124956] ACPI : EC: EC stopped [16815.124958] PM: Saving platform NVS memory [16815.125016] Disabling non-boot CPUs ... [16815.126260] Broke affinity for irq 276 [16815.128484] smpboot: CPU 1 is now offline [16815.146729] Broke affinity for irq 122 [16815.146806] Broke affinity for irq 276 [16815.146817] Broke affinity for irq 277 [16815.147934] smpboot: CPU 2 is now offline [16815.174307] Broke affinity for irq 1 [16815.174317] Broke affinity for irq 8 [16815.174325] Broke affinity for irq 9 [16815.174334] Broke affinity for irq 12 [16815.174342] Broke affinity for irq 14 [16815.174351] Broke affinity for irq 16 [16815.174359] Broke affinity for irq 17 [16815.174370] Broke affinity for irq 51 [16815.174383] Broke affinity for irq 122 [16815.174434] Broke affinity for irq 276 [16815.174443] Broke affinity for irq 277 [16815.... Read more

A:Dell XPS 13 9360 USB ethernet (Dell adapter) not recognised after wake from suspend

Hi mitos1os,Thanks for posting.Here is some information you may find helpful:http://dell.to/2k7yXox

Read other 1 answers
RELEVANCY SCORE 81.6

I have an issue with the sleep function. The computer does not awake from sleep. When I try to do it, it behaves as if it was waking, but it never ends and there is only a black screen; the mouse and keyboard are inoperative. The only thing possible to do is a hard reboot. When it boots, it shows a notice with a minute report (in the zip file) usually saying there was a blue screen, but I NEVER see any blue screen at all.

I know the power configuration is OK because I have always used the same scheme. A powercfg ?energy report shows several errors and warnings. They refer to USB and PCI (vendor 1002=ATI motherboard), but I don?t know how to repair them.

I downloaded the drivers downloader from Rrecipester.org and downloaded and installed the drivers. They are all Broadcom Corporation signed, the brand of my USB Bluetoth attachment. I rebooted after installing, as recommended. Run powercfg ?energy again and got the same report issues (in the zip file). I don?t think the processor utilization warnings to be very important because they are low and sporadic picks. It has been like this for some time now, so I don?t have a restore point. Can someone help and tell me what I can do so solve this issue, please?

Files uploaded in the attached zip:
. Windows warning after reboot
. Windows dump and xml files (2 = 1 each)
. Powercfg -energy report
I wanted to correct the thread title, but was unable to do it. Maybe someone else can do it.

A:No Wake From Sleep BlockedI have an issue with the sleep function. T

Quite confident it's a driver issue, it will be very difficult to troubleshoot from the one included dump file though as it's incomplete and inconclusive.


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

BAD_POOL_CALLER (c2)
The current thread is making a bad pool request. Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 000000000000109b, (reserved)
Arg3: 0000000004440006, Memory contents of the pool block
Arg4: fffffa8007c481b0, Address of the block of pool being deallocated

Debugging Details:
------------------

***** Debugger could not find nt in module list, module list might be corrupt, error 0x80070057.

Cannot get _POOL_TRACKER_BIG_PAGES type size
Cannot get _POOL_TRACKER_BIG_PAGES type size

POOL_ADDRESS: fffffa8007c481b0

BUGCHECK_STR: 0xc2_7

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffffa80036544e0 to fffff800038c2d40

STACK_TEXT:
fffff800`00b9c360 fffffa80`036544e0 : 00000000`00000000 00000000`000007ff fffffa80`... Read more

Read other 9 answers
RELEVANCY SCORE 81.6

Whether I choose any option other than to turn PC off, instead of tapping spacebar on my MS wireless keyboard I have to tap the button for power on the tower, then the monitor turns on as the fan runs, but always a black screen. So then I have to do a manual boot and select to start normally.
 
Started a week ago, around the same time as a graphics card failure. I installed a new PNY GeForce, updated ALL drivers on my Gateway DX4710-UB301A, (Win 7 Home Premium 64-bit, AVG antivirus free 2014) played with power management and startup config settings, trolled forums, performed malware scans, and still can't figure out the issue. 
 
Please help!

Read other answers
RELEVANCY SCORE 80.4

Greetings.  I have a T61 that won't wake from sleep. Situation:Put PC to "sleep" using Fn+F4, closing lid or let it go to "sleep" via system timerPC will not wake upon opening lid, using Fn+F4 or power button.We're forced to either 1) hold down power button (which forces a reboot), or 2) (when that fails), unplug from wall AND remove battery.System:T61, 7664 RYU, Bios 7LETC6WW (2.26)VistaAll Microsoft and Lenovo patches installed and current Notes:Don't have a restore point we can refer back to.Don't want to have to burn it down and start over.My hunch is that there is a conflict somewhere in the registry (maybe between what the bios thinks and what the registry has)?I'll PayPal you $25 if your solution fixes it....  Seriously. Many thanks.  

A:T61 Won't Wake From Sleep

Hi, I have the same problem and have tried all the fixes...none work.  If you get a solution please let me know! Thanks,[email protected]

Read other 4 answers
RELEVANCY SCORE 80.4

Hi All,
   My boss just bought a XPS 15 9550 last September.  There are a few cases each week that it does not wake up from sleep.  All drivers are up to date.  I did an online check with Dell for hardware check and all seems fine.
The computer goes into some state that the screen is black, the computer is running and there is nothing else but holding the power button down to restart it.

It's frustrating. 

A:Cant wake up from Sleep

Hi,
Thank you for writing to us!
We would like to apologize for the inconvenience caused.
In this case we would suggest you to update the BIOS to the latest version. Also update the chipset drivers on the system ( un-install -> restart system -> install ).
Kindly private message the service tag and email address.
Thanks
Robin

Read other 1 answers
RELEVANCY SCORE 80.4

driver me crazy:
my PC details :
MB : GIGA X38-DQ6 BIOS F9a
Menory: G.Skill DDR800 (1+2G) X2 =6 G 4-4-4-12
CPU: E6550
Harddisk : WD 3200YS
Vedio Card: LeadTeck PX8800GT
I can not stand 8800GT's 100% fan noice , so I order AC S1 (Rev2) heatsink to replace old one, replcace is good, the noice is down, and also control the temp to 43 degree,
then the story comes: I find VISTA Home P 64 SP1 Can Sleep , but when I try to wake up , the PC , CPU(Fan), Hardisk , VedioCard fan start working , but the LCD have no signal, and Wireless Keybord and mouse does not work .
I reinstall chip (MB)drivers and vedio card drivers ... ... still same problem.
I change DELL 2407 to Philips 190P stll no siginal...

I change BIOS From S3 to S1 , yes, it can wake up, but I need S3 !!!
I check the Device Manger, and find SYSTEM DEVICES -> PCI Bus Properties general say working properly, BUT resources menory range conflicts
pls. see the picsorry it is Chinese ) :
Powercfg /a says system support S3:


I am sorry my OS is Chinese, but I can NOT find answer from China, pls. help, if you guys need transfer into English, just let me know!
one more pic from DM:

A:S3 STR Sleep Can NOT Wake up

Hi Wufawutian,

Check this Tutorial for solving sleep problems...

Power Options and Sleep Mode Problems

Let me know the results
Steven

Read other 5 answers
RELEVANCY SCORE 80.4

1st system
Windows 7 x64 7600 clean install, intel e6550 cpu, intel 965g motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more mornitors, 1.5gb memory

- no problems going to sleep or waking up, using either S1 or S3 as sleep state in bios

2nd system
Windows 7 x64 7600 clean install, intel i5 750 cpu, gigabyte p55-md80 motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more monitors, 4gb memory

- no problems going to sleep or waking up, using S1 as sleep state in bios

- no problem going to sleep using S3, however cannot wake up from S3 sleep. Pressing the power button produces a normal reboot instead of a wake up.

System 2 can sleep and wake up normally when using just the nvidia 6200. It is only when the 4670 video card is used in system 2 that S3 sleep becomes an issue. Doesn't matter if its by itself or paired with the 6200.

I have tried every sleep tweak suggested here in terms of modifying bios settings and advanced power settings. I've tried the radeon driver 9.9, 9.5, and 9.3 for win7 64. There are many reports of S3 issues with MSI motherboards in general, as well as with win7 ati drivers. Open to any suggestions. Thanks

A:Cannot wake from S3 Sleep

  
Quote: Originally Posted by johnhoh


1st system
Windows 7 x64 7600 clean install, intel e6550 cpu, intel 965g motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more mornitors, 1.5gb memory

- no problems going to sleep or waking up, using either S1 or S3 as sleep state in bios

2nd system
Windows 7 x64 7600 clean install, intel i5 750 cpu, gigabyte p55-md80 motherboard, sapphire radeon 4670 video card on 2 monitors, nvidia 6200 video card on two more monitors, 4gb memory

- no problems going to sleep or waking up, using S1 as sleep state in bios

- no problem going to sleep using S3, however cannot wake up from S3 sleep. Pressing the power button produces a normal reboot instead of a wake up.

System 2 can sleep and wake up normally when using just the nvidia 6200. It is only when the 4670 video card is used in system 2 that S3 sleep becomes an issue. Doesn't matter if its by itself or paired with the 6200.

I have tried every sleep tweak suggested here in terms of modifying bios settings and advanced power settings. I've tried the radeon driver 9.9, 9.5, and 9.3 for win7 64. There are many reports of S3 issues with MSI motherboards in general, as well as with win7 ati drivers. Open to any suggestions. Thanks


Hi,

Try Standby Tool, it solved all my S3 problems.
Here is the version for Win7.
In the post you'll see "mst09098.exe".

http://www.degroeneknop.nl/forum/ind....htm... Read more

Read other 4 answers
RELEVANCY SCORE 80.4

Hi group,When my PC (HP Pavilion) goes into "idle" - when I'm not using it - it will not wake back up. I get no video, and sometimes my mouse will not wake up either. When I disconnect my power cord and reconnect the computer, I am able to boot up and things work. The computer works fine as long as I don't let it go to idle. For example, when I shut it down, it will boot up fine the next time. This just started happening recently after two updates: one from Norton, and the other from Quicken. I have no idea whether one of these caused the problem. I keep my PC well-maintained with all the latest updates. I have run the power troubleshooter, as well as the updates troubleshooter, and both detected no problems. Open to any ideas you may have,Thanks,Jeff

Read other answers
RELEVANCY SCORE 80.4

help please...
i just added 2 gig of ram to my lappy.(it was originally using 2 gig)
Since added i realised that windows is having trouble waking from sleep especially if i leave it to sleep for some time ( about an hour of sleep time) when i try to wake it it justs seems to lose power and dies or the fans just keep spinning but nothing happens.... nand i have run windows memory diagnostics... it doesnt seem to detect any problem with the ram..

A:Cant Wake From Sleep

  
Quote: Originally Posted by manusdn7


help please...
i just added 2 gig of ram to my lappy.(it was originally using 2 gig)
Since added i realised that windows is having trouble waking from sleep especially if i leave it to sleep for some time ( about an hour of sleep time) when i try to wake it it justs seems to lose power and dies or the fans just keep spinning but nothing happens.... nand i have run windows memory diagnostics... it doesnt seem to detect any problem with the ram..



Hi manusdn7 and welcome

The windows memory test does not stress your memory enough to tell, plus it is run from within windows.

You need to run memtestx86

Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember that memtest errors can be either memory or bad motherboard slots so you may have to test memory one stick at a time, and the slots with known good memory.

Let us know if you need further assistance
Jan

Read other 5 answers
RELEVANCY SCORE 80.4

My computer will go into sleep mode (sleep, hibernate, and all power off settings in the power setting are disabled) and it will not wake up. Preform a hard reboot and it beeps once every second without getting through post. Leave it alone for a few days and it's fine boots as normal. Last for a day or two then happens again. Any one got any ideas?

A:Sleep will not wake

Hi @Cbwesson, and thank you for your post.Welcome to the HP Support Forums! It is a great place to find the help you need, from other users, HP experts and other support personnel. I understand that your computer is not waking properly from sleep. I am happy to help with this. Please post the full product number and operating system in use on your computer. See the following, if you need help with that information.How Do I Find My Model Number or Product Number?Is the Windows Version on My Computer 32-bit or 64-bit? For now and assuming that you are using Windows 10, give this a try: HP PCs - Sleep and Hibernate Issues (Windows 10, 8), and let me know how it goes. I look forward to seeing your response, and if it does resolve your issue, please mark this post as a solution. Kudos would also be appreciated.

Read other 6 answers
RELEVANCY SCORE 80.4

Hi, I was wondering if anybody has had this problem before?

My computer was put to sleep earlier on today, and I moved the mouse to turn it back on. The power light went from orange (sleep mode) to blue (powered on). Nothing was displayed on the machine. Bashed some buttons, nothing happened, so did a hard reboot.

The power button went red (which happens if I hard reboot it) then to blue but that's it. The fans and hard drive starts going, but no beeps, no POST, no display. Nothing.

Already, I've tried:

- Reseating my RAM sticks - nothing
- Unplugging the hard drive - bf actually broke a sata slot, although he says it was lose before. The pins are not straight now and I can't get the black slot back onto the mobo. Plugged hard drive into sata 2 slot, still get no reaction.

Anything else I can try?
 

A:Can't wake up from sleep.

Try clearing CMOS, see if that helps.

http://time4tech.com/article25.html
 

Read other 3 answers
RELEVANCY SCORE 80.4

Having struggled to get my computer to sleep -

When I do a wake up from 'Sleep' I get - Windows did not shut down correctly.
It then offers the 'Safe Options' list,

Anyone know why it does this?

A:Wake up from sleep

Does the power remain connected to the PC?

Read other 5 answers
RELEVANCY SCORE 80.4

I'm running Snow Leopard on my iMac which is wirelessly connected to the house's router with Airport. The PC is connected directly to the router with the ethernet cable. It is a fairly new computer, running Windows 7. It is an Acer, 2.something GHz processor. Is there any software that I can use on my mac to wake up my PC remotely from my Mac? Thank you.
 

A:Can I Wake My PC From Sleep From My Mac?

Wake on Lan is just a magic packets to notify any WOL capable nic and computer to turn on or wake up. Just Google search for OS x wol.
http://www.readpixel.com/wakeonlan/
 

Read other 1 answers
RELEVANCY SCORE 80.4

Since installing SP1 my computer has been acting like a one year old. When I put it to sleep at night it keeps waking and then goes to sleep only to wake again. Left untouched it went through this cycle all night. Starts 20 seconds after I put it to sleep and stays on for 2 minutes and then goes to sleep for 20 seconds then wake for two minutes etc etc etc.I disconnected a flash drive that I had in a USB port.
I disabled "wake timers" under Sleep in Power Options
I disabled "allow this device to wake the computer" in the properties of the USB wireless mouse
In the properties for the network adapter under the "Advanced" tab I disabled the "Wake on Settings". That fixed the problem but then I couldn't wake my computer with Logmein and I think Orb is disabled.
Noticed when I went back that there's another tab "Power Control" for network adapter. I disabled "allow this device to wake the computer" and changed the Advanced tab "Wake on setting" to "OS controlled".
Now when I put it to sleep it seems to stay down. I'll update tomorrow if it misbehaves tonight.

A:Sleep Wake Sleep Wake

If you think it might be the network card, you can always open a cmd prompt and run powercfg -lastwake to see which device was logged as waking the machine last.

Read other 3 answers
RELEVANCY SCORE 80.4

My computer can go to sleep mode. But upon wake up, it will stuck there with no video signal. I can see the fans are moving, cd and hd seems working. I have the latest bios installed and have tried different settings. Any thoughts?
This is my spec:
MSI Neo2 P35 with intel e2180
evga 8600gts
4gb ram.

A:Help with sleep wake up

Do you also have the latest driver for your video card?

Read other 9 answers
RELEVANCY SCORE 80.4

Hi,

Hoping someone can help me with this.

I installed 7RC a couple of months ago. Since then whenever my pc sleeps I can not wake it up. It used to wake up fine in XP.

To get it going again I have to cold reboot or pull the plug. When it comes back up everything I was doing is still there, I just have to enter my password.

I think I have all the settings right but if someone could run me through everything that needs to be set I'd be really grateful.

Thanks in advance.


Rich

A:PC Won't wake from sleep

Mine is the same and takes about 2 and a half mins to wake up

I have my bios set to wake up on double mouse click, it does wake up eventually

Should be fixed in the official release!!

Read other 9 answers