Over 1 million tech questions and answers.

disallowed access to a server

Q: disallowed access to a server

Hello
i have a weird issue that i'm handle with.
main goal - restrict users to access local servers via \\servername
server 2012 r2 , domain environment

i created a GPO that disallow access to servers - unc path cannot be accessed.
This Policy works. (attached file 1.png) When selecting a location to download a file, accessing through the address bar to unc path results in an error.


But when i perform the same operation through the file name bar it works and i don't received error message. (attached file 2.png)

bottom line, i want that users won't be able to access servers when perfoming " \\servername " or " \\serverIP "
please assist.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: disallowed access to a server

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 50.8

erro msg:

"ACCESS TO THE RESOURCE 'D:\JAY' has been disallowed"
When i scan i can see my files being scanned but i cant open the folder. i really dont want to lose my files because it will be the end of me, jobless.
When i go to command prompt type attrib my folder Jay is indicated r read only and even at the end of my folder Jay it is indicated Jay.exe it shows an extention on the folder. please help me urgently
 

A:folder disallowed

I have the same problem!

_BUmp_
 

Read other 2 answers
RELEVANCY SCORE 50.4

Everyone,
Trying to get a disconnected environment to update to the latest Microsoft CTL and running into issues.  My one Windows 7 test system is not updating correctly. Here is what i have done.
1. Ran certutil commands to download the offline lists for trusted/untrusted CTLs
2. Transferred the CTL files to my disconnected environment
3. Setup a webserver hosting the Microsoft CTLs
4. Configured the Windows 7 test system using manual registry entries to the following settings:
                - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\SystemCertificates\AuthRoot\DisableRootAutoUpdate: 1
                - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\SystemCertificates\AuthRoot\EnableDisallowedCertAutoUpdate: 1
                - HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SystemCertificates\AuthRoot\AutoUpdate\RootDirUrl: <custom URL>
5. Verified through IIS logs the system was connecting and downloading the disallowedcertstl.cab
6. Verified through the application log on the Windows 7 test system event id 4112, source CAPI2 "Successful auto update of disallowed certificate list with effective date
Reference Documentation:

Configure Trusted Roots and Disallowed Certificates: Provides information for establishing an offline ... Read more

Read other answers
RELEVANCY SCORE 50.4

Everyone,
Trying to get a disconnected environment to update to the latest Microsoft CTL and running into issues.  My one Windows 7 test system is not updating correctly. Here is what i have done.
1. Ran certutil commands to download the offline lists for trusted/untrusted CTLs
2. Transferred the CTL files to my disconnected environment
3. Setup a webserver hosting the Microsoft CTLs
4. Configured the Windows 7 test system using manual registry entries to the following settings:
                - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\SystemCertificates\AuthRoot\DisableRootAutoUpdate: 1
                - HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\SystemCertificates\AuthRoot\EnableDisallowedCertAutoUpdate: 1
                - HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SystemCertificates\AuthRoot\AutoUpdate\RootDirUrl: <custom URL>
5. Verified through IIS logs the system was connecting and downloading the disallowedcertstl.cab
6. Verified through the application log on the Windows 7 test system event id 4112, source CAPI2 "Successful auto update of disallowed certificate list with effective date
Reference Documentation:

Configure Trusted Roots and Disallowed Certificates: Provides information for establishing an offline ... Read more

Read other answers
RELEVANCY SCORE 45.6

On Windows7 Pro,  trying to run IIS.  The way I am used to execute is  on the browser "localhost".  I used to have the code in the directory  C:\inetpub\wwwroot.   Even before I copy,  I am hoping to see
the image IIS welcome page.  Once it is successful, want to copy the code as that was the way I used to do in Window XP.    However I am getting the following message.  I have administrator access to the machine and gave full permissions
to the folder  'C:\inetpub\wwwroot'.  Still the same message. 
Error message 401.3: You do not have permission to view this directory or page using the credentials you supplied (access denied due to Access Control Lists). Ask the Web server's administrator to give you access to 'C:\inetpub\wwwroot'.

Can someone help me to address this issue.  Thanks a lot in advance. 

A:Error message 401.3: You do not have permission to view this directory or page using the credentials you supplied (access denied due to Access Control Lists). Ask the Web server's administrator to give you access to 'C:\inetpub\wwwroot'.

Hi,


You can click the IIS hyperlink in my previous post or using this one

http://forums.iis.net/


Regards,

Vincent Wang
TechNet Community Support

Read other 19 answers
RELEVANCY SCORE 44.8

We are getting this message when accessing a search page on our SQL server. Any ideas anyone?

Microsoft OLE DB Provider for ODBC Drivers error '80004005'

[Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.

/faxmachine_search2.asp, line 5

cheers,
Dan
 

Read other answers
RELEVANCY SCORE 44.8

We have a requirement to get the windows services from one of our remote server. We already have a group with admin rights on that machine and users added to it. But while fetching the services from that details we get below error.
We are using C#.net to fetch the services.
Error:
InvalidOperationException Was caught
Cannot open Service Control Manager on computer :"". This operation might require other privileges.

Read other answers
RELEVANCY SCORE 44.4

Cannot access windows updates, any admin tools, av websites., cannot run spybot, internet explorer giving security settings warning, cannot change any of the settings.

HJT log file:

Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 12:08:50 PM, on 6/15/2011
Platform: Windows 2003 SP2 (WinNT 5.02.3790)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Normal

Running processes:
C:\Documents and Settings\administrator.#domain#\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Trend Micro\AMSP\coreServiceShell.exe
C:\Program Files\Trend Micro\UniClient\UiFrmWrk\uiWatchDog.exe
C:\Program Files\Trend Micro\AMSP\coreFrameworkHost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Microsoft Shared\VS7DEBUG\MDM.EXE
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Trend Micro\Client Server Security Agent\tmlisten.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\rdpclip.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Broadc... Read more

A:Server 2003 Terminal Server cannot access admin tools

Hello , And to the Bleeping Computer Malware Removal Forum. My name is Elise and I'll be glad to help you with your computer problems.I will be working on your malware issues, this may or may not solve other issues you may have with your machine.Please note that whatever repairs we make, are for fixing your computer problems only and by no means should be used on another computer.The cleaning process is not instant. Logs can take some time to research, so please be patient with me. I know that you need your computer working as quickly as possible, and I will work hard to help see that happen. Please reply using the Add/Reply button in the lower right hand corner of your screen. Do not start a new topic. The logs that you post should be pasted directly into the reply. Only attach them if requested or if they do not fit into the post.Unfortunately, if I do not hear back from you within 5 days, I will be forced to close your topic. If you still need help after I have closed your topic, send me or a moderator a personal message with the address of the thread or feel free to create a new one.You may want to keep the link to this topic in your favorites. Alternatively, you can click the button at the top bar of this topic and Track this Topic, where you can choose email notifications. The topics you are tracking are shown here.-----------------------------------------------------------If you have since resolved the original problem you were having, we would appreciate you... Read more

Read other 2 answers
RELEVANCY SCORE 44.4

I have a Access 2000 database residing on one sever and an installation of SQL Server 2008 residing on another. Both servers are running Windows Server 2003. I created a linked server using the code below. When I run EXEC sp_tables_ex 'PropCont' I get the following,
"OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: The provider did not give any information about the error.].
Msg 7399, Level 16, State 1, Procedure sp_tables_ex, Line 13
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. The provider did not give any information about the error."

I tried changing the code to specify my account information, which has Administrative privileges on the domain and I get,
"OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80040e4d: Authentication failed.].
Msg 7399, Level 16, State 1, Procedure sp_tables_ex, Line 13
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. Authentication failed."

Originally I was getting an error that said, "The workgroup information file is missing or opened exclusively by another user" I found an article on line that suggested I do the following,
"1. Open SSMS
2. Expand Server Objects, Linked Servers, Providers
3. Double click the provider (Microsoft.Jet.OLEDB.4.0)
4. UNTICK the "Allow inprocess" option"
I did this and I stopped ... Read more

A:Linked Server from SQL Server 2008 to Access 2000 db gives error

Read other 7 answers
RELEVANCY SCORE 43.6

I'd like to learn more about why this was logged in the Event Viewer:  i.imgur.com/a2vTjwD.png
After looking it up, I found this article (https://technet.microsoft.com/library/security/2728973) which stated that "An attacker could use these certificates to spoof content, perform phishing attacks, or perform man-in-the-middle attacks."

I've never seen this logged in the Event Viewer before, and am not sure how to be protected from any of these vulnerabilities that Microsoft has outlined, now that a potential infection could have already happened.


So my question is: how do I remove the certificate? Where are these "disallowed certificates" located?

Read other answers
RELEVANCY SCORE 43.2

Hi there
Why does Windows Networking always seem to hose things up ( Linux works EVERY time)

I have two computers on the SAME test private LAN one Whitehorse (W2003 server) and the other Blackdog (W8 Enterprise) both enabled "Shareable and Visible".

View from W2003 -- can see and access disks C,D, and F on W8 Computer

View from W8 - Networking shows the computer Whitehorse (W2003 server) but can't access any disks etc (or even its printer). PING even fails but W8 obviously knows it's on the Network because its found it. The stupid Windows diagnostics when you click Diagnose doesn't help at all --in fact I've NEVER found the network diagnostic panel of the slightest bit of help ever.

I've switched off firewalls etc while testing so there's no security rubbish to take care of while I'm trying to get this to work. LAN is purely LOCAL -- no computer is on "the other side" of a router.

Both machines can access independently the Internet through a Local router and connections are via LAN cable so nothing should be simpler. !! But can I get this to work !!.

I had a similar problem with W7 but it seemed to "Disappear" without me actually doing anything -- the proverbial "Ghost in the Machine" I expect.

Screenshots enc.

(Windows Networking Grrrhhhhhh! -- I'm not particularly technical with this stuff but any time I've used Networking with Linux it works STRAIGHT OUT OF THE BOX and there's no problem sharing from or to windows. !... Read more

A:W2K3 Server can access W8 W8 computer cant see W2K server

Assuming this Windows 8 Enterprise machine isn't locked down with Group Policy.

This type of problem usually requires that you change the lanman server parameters in order to get Windows 8 working with older servers. Do these adjustments on the Windows 8 machines that needs to connect to the server.

Control Panel - Administrative Tools - Local Security Policy

Local Policies - Security Options

Network security: LAN Manager authentication level
Set to Send LM & NTLM responses only

Set the Minimum session security for NTLM SSP
Disable Require 128-bit encryption

Reboot all machines after making the adjustment.

There are two separate settings for disabling the 128 bit encryption.

Read other 24 answers
RELEVANCY SCORE 41.2

Hi There,

Could anyone help me I trying to find the answer or links that may help me find the answer to my problem.....

I could access a folder from the server before, and now I get a message" The link you are trying to access is unavailable or missing, try checking your spelling and try again.....

Is it a permission problem?
Please help me
Thanks
Shodowclarke
 

Read other answers
RELEVANCY SCORE 41.2

My husband and I have several email addresses for our business that were created and hosted by another party using cPanel. Unfortunately we are late in paying our bill and our emails addresses have been shut down. Is there any way to redirect them? Any other advice? We did have access to the cPanel account but looks that was access was changed too. (see attached) If I am able to obtain access again, can I transfer the email addresses somehow?
 

A:Can I Access Emails If My Server Access Has Been Shut Down?

what was the last part after the @ of the email
why not just pay the bill ?
if ita a domain youu own , then you can transfer to a new provider and they can also host your email - but there will be a hosting / email server charge for you on another host.

Assuming this is all via a domain name, what is your domain name ?
when does the domain name expire?

Who are you hosting with now - is it very expensive?
What country are you in

You will NOT be able to transfer the email address and all the OLD emails , just the email address may be transfered - the emails will stay on the current hosting server , and if you leave it to long , which you may have already done, they will delete all the emails anyway
 

Read other 1 answers
RELEVANCY SCORE 41.2

Hello there,

I'm struggling with networking problems.
I have server 2003 that acts as print server, file server and VPN server.

But after some configuring for the VPN adapter (separate adapter) I can't connect to \\server (that's server real name) anymore.
BUT I can connect with it over IP (192.168.1.200, static IP)

So I thought that the VPN adapter is conflicting with some settings and disabled it, and it didn't help.

Server is behind router and I have static IP. Router seems to be configured correctly.
I can ping the server.

What's the problem?

edir:
May it be netBIOS problem?

M
 

A:Solved: Cannot access server by name, can access by internal IP

Read other 14 answers
RELEVANCY SCORE 40.4

Hello,

I have a problem to access file server on Windows Server 2000 from a Windows 7 PC. For your information, due to some reasons, both Windows 7 and Windows Server 2000 are in different domain.

I have tried all suggested solutions which are :
i. to unchecked both attributes in 'Network Security : Minimum session security for NTLM SSP based (including secure RPC)' for both clients and server.
ii. to apply 'Send LM & NTLM - use NTLMv2 session security if negotiated' in 'Network Security : LAN Manager authentication level'
iii. to make sure the time setting for both Windows 7 and Windows Server 2000 are the same.

But still, i couldn't access the file server. In fact, each time I entered domain\username to authenticate, it will give out this message :



Since I am kinda new to this troubleshooting things, it would be great if someone can tell me why does this happening. Is it because of the different domain?

thanks in advance.

A:Windows 7 unable to Access file server on Windows Server 2000

To connect to the server you would need to enter the credentials of the domain user on the server that would have access. For example if the domain was 'home' with a user 'Josh' then I would put:

home\Josh

As the username. If you want to get advanced you could try and form a trust with the other domain in active directory so that the other domain has permission to access the server

Josh

Read other 4 answers
RELEVANCY SCORE 37.6

My friend has windows xp at her house on a dsl connection. At her office in the university she has a newer mac. Is it possible to do a remote login to her home pc and access files through the internet. I know she has to have at least a shared folder. the mac has a menu to connect to servers and gives the option to enter an ip address. I think all i need to do is type in the address and then look at the share file. does anyone know if it is more complicated than this and will this kind of access be blocked by a firewall either by the university or from her ISP.
 

A:how to get access to xp server across web

You can share files using the following methods:

- FTP programs
- Remote control applications
- Online storage and collaboration web sites
- Other options (vpn, peer-to-peer, instant messaging)

Here is an article that you may find usefull:
http://www.practicallynetworked.com/howto/fileshare/fileshare_intro.htm
 

Read other 1 answers
RELEVANCY SCORE 37.6

I am using a wireless linksys WRT54G router with 3 pcs, and can access the internet fine will all of them. I can connect to ftp servers that use the standard port 21, but cannot access one using a non-standard ftp port. I am using FTP Commander, and it appears to connect, but no files/folders show. A minute later I get the error message "An unexpected response was received from the FTP server. Make sure that you have entered the correct value in setup for your FTP port."
I have tried enabling port range forwarding (both while assigning a static IP and while using dhcp) and have tried enabling DMZ with the same result.
I've tried this with a computer running 98SE as well as with one running XP.
I know other people can access this server. Any Help would be appreciated.

Thanks,
Samantha
 

A:Can't Access FTP Server

Read other 7 answers
RELEVANCY SCORE 37.6

I hope this is in the correct forum, so here goes. We have opened an ofiice in an old blg, and when we called ATT they said we could get a dsl line! well they made a mistake, so we explored a t1 line to much money. ok the people we rent from have a server, so someone suggested we do a wireless bridge. We are not directly in thair line of sight so is there a way to connect to a server wirelessly from building to building if the connecting bldg is 150 yrds away. Thanks any help would be appreciated or a site for help. There will only be two maybe three computers in use lap tops with docking stations or just lap tops.

oh forgot , we are using att sticks now , but slow and cumbersome also we are not the same company so w its two differant servers. Thanks again.
 

A:Server access

On the server, install a MIMO router which will have higher radio output.
Mount the router (at the server) near a window that faces your building and
set the SSID to something you and the owner agree upon.

Take a laptop with a WiFi adapter and stand outside your building and verify you can
get a good signal and connect.

Once that works, you get a Wireless Bridge (usually an Access Point configured as a bridge),
like this.

Once it all works (ie your systems have internet access), the MIMO router should have encryption enabled and your Bridge will need the key to connect.
 

Read other 8 answers
RELEVANCY SCORE 37.6

Well, this has been an ongoing problem for a while, and RoadRunner support says "We don't block anything here at RoadRunner", so...here's my problem:

I can't access my server, http://darkangels-rs.com. Only very seldomly can I access the front page, with just the text, no background image and no little person icon that should be there. If I refresh, I get a timeout error. Most of the time, I get a timeout error.

I'm running Windows XP SP2, the site does not load on IE7 or FF2, and I'm using RoadRunner/Time Warner Cable as my ISP (obviously.) I've checked all my trusted sites, restricted sites (unless the IP of the site is blocked, in which case I don't know it, I think it's like 216.something.something.something) and even turned off my firewalls, checked their settings, scanned for adware, spyware, viruses, and the like, reset my modem, repaired my connection, AND turned off google web accelerator, in case they were blocking it, and no dice. Anybody got any ideas?
 

Read other answers
RELEVANCY SCORE 37.6

hello Everyone!
Some body please tell me about the access of the Server of my LAb in college thanks.
There is the windows XP is installed on server .
 

A:WAnt to Access Server in my LAb os XP

Hiya and welcome to Tech Support Guy

You'll have to get in contact with your Network Administrator of your college, as they will set you up with the access you need.

Regards

eddie
 

Read other 1 answers
RELEVANCY SCORE 37.6

Here is my Hijack this Report

Logfile of HijackThis v1.99.1
Scan saved at 11:44:51 PM, on 5/2/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\LEXBCES.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\system32\LEXPPS.EXE
C:\WINDOWS\System32\nvsvc32.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\Program Files\Alcohol Soft\Alcohol 120\StarWind\StarWindService.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\iTunes\iTunesHelper.exe
C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\E_FATIAIA.EXE
C:\Program Files\PeerGuardian2\pg2.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\Program Files\Yahoo!\messenger\ymsgr_tray.exe
C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\E_FATIAIA.EXE
C:\Program Files\MSN Messenger\msnmsgr.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Documents and Settings\TEMP\Desktop\hijackthis\HijackThis.exe

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Start Page = http://www.sony.com/vaiopeople
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://www.sony.com/vaiopeople
R0 - HKLM\Software\Microsoft\Internet Explorer\S... Read more

A:I can't access my Web server from my pc?

Hi and welcome to the forums, your log which you have submitted here is now in the process of being analyzed, some logs take longer than others depending on the type of infection. As I am currently at undergrad status all my post are verified before final posting so this may also cause a short delay in the final post. Please be patient and I will get back to you as soon as I can

While you are wating for your reply please note...

Do not try and fix any entries that you see yourself (even if they do seem very obvious) If you do so the fix may not work as it should, leaving you open to possible immediate re-infection.

Do not disable your system restore - an infected/corrupted system restore is better than none at all, if anything should go wrong during the fix and restore is turned off then you could well be looking at a full system format

Please do not post in other forums while you are being helped here This is so the HJT helpers at other forums can get on with helping other users that are in need of attention.

If you are at anytime in doubt, or unsure of anything then please ask ! Dont be frightened - we wont bite....

Many Thanks - Dorian - AkA Steve
 

Read other 2 answers
RELEVANCY SCORE 37.6

With the company I work for, we have VPN access using a Cisco VPN dialer. Now from this, we can access our billing software, as well as our email. Now I want to get access to our main server, where most of our files are, but no one has had any success except one guy who has XP that doesn't recall what he did to get there. Can I FTP over? I can ping the machine so I know my computer can at least see it. I run W2K and the server is W2K as well...

any help is EXTREMELY appreciated!!!
 

A:VPN access to server

(have you tried mapping a drive to the share? when you access it from work, is it mapped to a drive letter in your windows explorer? or do you ftp to access it?)
 

Read other 1 answers
RELEVANCY SCORE 37.6

Can anyone explain to me how to use SQL Server as the back end of Access? I have an Access database that is full and I need to upgrade the back end so that I can hold more data. Do I need to purchase SQL Server? Is it hard to learn? Is it complicated and time consuming to do this?

Please help!

Joslady
 

A:SQL Server and Access

Read other 9 answers
RELEVANCY SCORE 37.6

A friend of mine ask me this and I have no idea (as I don't use SQL Server).

Anyone have any clue?

how do I set up partial pull merge replication between an SQL Server 2000 server and Access 2000 clients? Click to expand...

Thanks for the help.
 

Read other answers
RELEVANCY SCORE 37.6

Yeah i'm playing a game called Gunz, from legacygamers.net, i've downloaded all the latest patches, i've shut down my firewall, portforwarded, etc etc but when i go on i always get "cannot access server" i talked to the creator and he said that the server is accepting logins, but i still cant access the server. I know its kinda weird asking this here since most of you probably never heard of this game, but i thought it was worth a try.
 

Read other answers
RELEVANCY SCORE 37.6

ok fellas, after scouring the internet for hours ive finally given in and turned to the community for help. I have been trying to access this one site called www.vafinancials.com four hours upon hours. basically comes up page cannot be displayed...or cant connect to server or whatever... i have tried ie, chrome and opera browsers to no avail, i have flushed the dns server..nothing... i have tried tracert....

here are the results...

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

tracert www.vafinancials.com

Tracing route to www.vafinancials.com [64.79.73.170]
over a maximum of 30 hops:

1 1 ms <1 ms <1 ms 192.168.0.1
2 * * * Request timed out.
3 15 ms 15 ms 15 ms 64.59.184.237
4 25 ms 25 ms 26 ms rc2sc-tge0-1-5-0.wp.shawcable.net [66.163.77.65]

5 26 ms 25 ms 25 ms rc1nr-tge0-2-0-0.wp.shawcable.net [66.163.73.189
]
6 41 ms 51 ms 48 ms 66.163.65.118
7 44 ms 51 ms 49 ms 2-0-0-chi-eqx.peering.xlhost.com [206.223.119.8]

8 61 ms 61 ms 62 ms ten3-8.core-1.xlhost.com [206.222.25.34]
9 62 ms 53 ms 53 ms vl4051.pe-5.xlhost.com [206.222.25.154]
10 54 ms 53 ms 61 ms aa.49.4f.static.xlhost.com [64.79.73.170]

Trace complete.
i have tried unchecking auto detect in lan settings and rechecked it, done malware scans, tried everything under the sun to fix this including a remote session with an ISP rep...nothing...u can imagine im highly frustrated with this. i can access the site tho using a proxy but the client i need to play ... Read more

A:Cant access one particular server

If you can access via a proxy, but not from your normal IP number then it means that the website has blocked you. This appears to be a game site, so it is likely that you have been banned for breaches of the game rules
All you can do is contact the site via its support forum
 

Read other 2 answers
RELEVANCY SCORE 37.6

hello all,
i have a lacie ethernet mini nas storage device.
router has been configured for port forwarding. device is seen and usable through
lan computers, both wired and wireless.
shares , users & passwords are setup. everything works fine over the lan network
at home.
i tested (at least i thought it was a valid test), the ftp through both wired & wireless
computers, and access is good.
but i cannot access ftp from work (same kind of win-xp box).
this is what i used when it worked from home; "ftp:[email protected]/documents"
but IE cannot connect.
lacie instructions do not cover an ftp walk through.
i think their tech support is out having a donut with the maytag repair guy.
thanks
 

A:can't access my server by ftp

Read other 8 answers
RELEVANCY SCORE 37.6

Recenty purchased 2 new PC's with windows 8.
Setup workgroup, connected to server via work group. Saved credentials to system. Was able to access files first day.

Day two: try to access server and Win 8 prompts for username and password. I input UN and PW and system tells me its wrong. Even though I know its right.

I have tired many things with firewall and outbound security on WIN 8 machine, but it will not connect to win2k server via workgroup as it denies password.

Anyone know how to fix/resolve this issue (hating windows 8 right now)

A:Win 8 cant access Server w2k.

check out this thread.
http://www.eightforums.com/network-s...2k-server.html

Read other 24 answers
RELEVANCY SCORE 37.6

I'm having the same problem, but that little Windows trick didn't help. My computer is and has always been (yes, I double checked!) authorized to access the network, but it won't now. I think I accidentally specified a wrong path, and now I can't get into the server at all. Does that make sense? If so, any advice??
 

A:Can't access server

chelbel said:


I'm having the same problem, but that little Windows trick didn't help. My computer is and has always been (yes, I double checked!) authorized to access the network, but it won't now. I think I accidentally specified a wrong path, and now I can't get into the server at all. Does that make sense? If so, any advice??Click to expand...

chelbel,

You have stumbled onto a year old thread. But tell us about your network and server. Are you on a workgroup or domain, router, wireless?
 

Read other 2 answers
RELEVANCY SCORE 37.6

Okay, I'm stumped

I am trying to access a webserver from a PC and the browser tells me the server is down. Tried pinging it and I get a timed out response. nslookup fails to find the server. tried turning the firewall off, tried checking the content setting in the internet options, tried explorer and firefox. all with no luck. The user can email people at the site without any problems. The workstation can access pretty much any other server

I know the server I am trying to access is up and running because if I go down the street to another computer, I can browse the site and ping the address with no problems. Not only that, the site has around 500 subscribers and no-one else hase any problems.

There is something weird going on here. Any thoughts would be good. I am running Spybot on the workstation at the moment but have no real hope that it will turn up anything.

Workstation is a pentium 4 running Windows XP from a small office using a Seimens Speedstream modem.
 

Read other answers
RELEVANCY SCORE 37.6

We are running Windows 2000 Server. On the server is a Q: drive called 'Public'. 'Public''s permission is set to 'Everyone' with full-control. The employees and I can access the Public folder through My Network Places (most people have Win XP Pro) or through the run command, \\server\public.

Here's the problem. One person does not have access. She always did have access to the Public folder, but not anymore. I can access my PC (which is \\networkid) through her PC (\\popc). However, I cannot access \\server through \\popc. What is the problem? How come mine cannot see hers, but she can see mine? Me and everyone else can see the server, but not her.

Through her PC (\\popc), I type 'ping networkid' and I get replies. However, I type 'ping server' but there is no reply.

Any suggestions? I would love to get out of this funk!
 

A:All PC's can access the server, except one

Try recreating her Windows profile. Are you able to access the server if you log in with your profile on her PC? Is she able to access the server from a different PC using her own login?

Regards,
Rollin
 

Read other 1 answers
RELEVANCY SCORE 37.2

ok so heres the deal, i have an FTP server setup using FIlezilla Server , it is only accessible from my home network using my computer's internal network (LAN) IP address (192.168.xxx.xxx)...i used Dyndns.com to make a domain for my WAN IP address...now when i open this domain address as HTTP , it opens up my router config page!!!! y does that happen???? and if i do it like FTP://domain.blabla.com it asks for a username and password, when i put the login for FTP user account, nothing happens....and the Server client interface does not show whether any attempt was made to connect to the server..

PLZ HELP ME, WHAT AM I DOING WRONG? IS IT SOMETHING WRONG IN THE ROUTER CONFIG?

P.S : I HAVE FORWARDED PORT 21 TO MY PC (i.e the pc which hosts the server)
 

A:External Access To FTP Server

FTP needs two ports; 20 and 21; forward both to the lan address of the FTP server.

As for external access to your router; O U C H !
you should never forward port 80 into your system(s) Unless you also have a webserver active. Also be sure you have changed the router admin password.
 

Read other 21 answers
RELEVANCY SCORE 37.2

Hi All, I had the same error (Access Denied on this server) on several websites. Tried all the solutions offered here, to no avail.

Finally discovered that our fixed IP that we just got (new office, new ISP), had been blacklisted on all the big blacklisting services. So a quick call to our ISP and a new fixed IP and I'm able to access all sites again. FYI, the two sites we knew about that couldn't be accessed were www.expedia.com and www.dhl.com and www.dhl.cz.

So if you find yourself in a similar spot, I hope this info helps!
 

A:Access Denied on this server

Just make sure all of your computers have been tested for viruses or you may find yourself blacklisted again.
 

Read other 1 answers
RELEVANCY SCORE 37.2

Hello!

I have a brand new computer and have a takeover on the desktop already (an ad saying to 'Resell on the reseller marketplace on eBay) .... I was trying to remove this by using hijackthis & deleted 2 files. Now, when I open Outlook Express, it can't/won't connect to the server... just times out continuously.

These are the files I deleted.

O20 - Winlogon Notify: igfxcui - C:\WINDOWS\SYSTEM32\igfxdev.dll
O20 - Winlogon Notify: WgaLogon - C:\WINDOWS\SYSTEM32\WgaLogon.dll

Of course, the ad is still present & now my email won't work. I should not have messed around with hijackthis as I know VERY little about it. Could someone please help???

Thanks-
Kelly

Read other answers
RELEVANCY SCORE 37.2

We have a Windows 2000/NT SBS. The Access database file is on the server but not the program. Workstations have Windows Office XP. How do I password secure the database? Thanks for any help.
 

A:Securing Access on server

If the database is on an NTFS partition, you can set permissions on the file itself to allow only those you choose to access the file. There may be a way within Access to set permissions or an access list as well. It should not matter where the Access program is run from as to the creator of the DB to set an access control list. Probably easier to set permissions on the file.
 

Read other 1 answers
RELEVANCY SCORE 37.2

Hello,
I would like to access the microsoft FTP server but have found no way of doing it. Going into a browser and typing ftp.microsoft.com doesnt work and this happens
(i have hidden all the stuff related to me)
So if you beautiful people of the windows 10 fourms can help I will be very thankful
Thanks, Mineblock

A:How do I access the MICROSOFT FTP server?

Originally Posted by mineblockftw


Hello,
I would like to access the microsoft FTP server but have found no way of doing it. Going into a browser and typing ftp.microsoft.com doesnt work and this happens
(i have hidden all the stuff related to me)
So if you beautiful people of the windows 10 fourms can help I will be very thankful
Thanks, Mineblock



I'm not quite sure what you are trying to do.

Do you have your own FTP Server that you are trying to access? If so what year of Windows Server are you using? Windows Server 2003, Windows server 2006, Windows server 2012, ect

Read other 7 answers
RELEVANCY SCORE 37.2

I am attending a University that uses the Cisco Clean Access Agent to authenticate and check students computers for possible viruses and other problems. I have set up a netgear wireless router and now the computers using the router are incapable of accessing the cleanaccess server but the university network is demanding that they log in to the server. Is this a router problem, a university problem or what?

Thanks

Photographer
 

A:Clean Access Server

Welcome, photographer.

It sounds to me like it's your problem.

If you can find such a person, discuss this with somebody who understands the server's needs and how a router works.

I can understand their server not being able to access your computers hiding behind the router's firewall, but your computers' inability to access the server is beyond me. Unless the login process is tied in with the server trying to access the computer doing the login.

I suggest that you disable the router's firewall, and see if this makes a difference. If this permits the login/access then you may be able to still use the firewall by opening whatever port(s) the server requires.

If disabling the firewall doesn't work, the problem may be IP based. The IP address that the server would be seeing is whatever the network assigned, which is the router's WAN or Internet address; and your computers have addresses like 192.168.n.x. Don't know how to get around this, which leads back to my main suggestion--find somebody who understands both ends. Good luck, and let us know how this progresses. This is a new situation for me, and I'm here to learn.
 

Read other 3 answers
RELEVANCY SCORE 37.2

I want to be able to boot up at any workstation (on a network) in a DOS environment and access a directory on an NT server. There are ghost image files that I want to be able to decompress to the workstation. I believe I have to create a boot diskette but don't remember any details on how to do this.

Help me out. Your help is appreciated.
 

A:Booting up in DOS to access NT server

If the NT servers are formatted to use NTFS, then you cannot access the files through DOS.
 

Read other 3 answers
RELEVANCY SCORE 37.2

Hello everybody,
We have 5000 workstations with both Windows 7 (4000 workstations) and  windows XP (1000 workstations left).We access to a directory on a file server using a  Windows XP workstation  but when we are trying to access to the same file server
with Windows 7;we have the message "Winodws cannot acces to "the name of the server" ";This happend just to our windows 7 workstations..
I need help to what i cannot access to this server.
Thank you.
Regards,
Le Balbo

Read other answers
RELEVANCY SCORE 37.2

in order to install this modem that im trying to hookup...i need to close down the remote access server...but i don't know how to do it!!! please help!
 

A:remote access server

Go into control panel > services and look for the remote access server service and stop it. You can do it from a command prompt as well by opening a DOS window and typing

NET STOP "REMOTE ACCESS SERVER" /Y

Use the NET START "REMOTE ACCESS SERVER" /Y to start it again
 

Read other 3 answers
RELEVANCY SCORE 37.2

Dear techsupport,

Good Morning!

Sir i have a problem regarding access to our data server ( under window Xp). Our staff noticed that the server prompt that the HD are nearly full and after that our connection to the server are gone still i just reboot it then plug it again but we cannot access still
and i tried to ping the IP add of our server but the result is required time out totally lost all connection to server.

Can you help to figure oiut or how can i save the file on it to another external HD? if it FULL Hard drive (HD)?

Thank you very much. Hoping you can help me.
 

Read other answers
RELEVANCY SCORE 37.2

I've been dealing with this problem at a client's that's driving me batty. They had Fios installed and the installation guys did something to the wired internal network that screwed it up. Everyone now gets internet but nobody's machine can see the server.

I can ping the server but no icon shows up on any screen. The server gets internet as well. What am I missing here? It's a Windows server, 2008 or 12 I think. I'm a bit unsure of what version of server because I haven't been there in over a year, until last week so I think that's what it is.

Oh anmd it's not a domain but a workgroup since there are only 4 users hooked up.
 

Read other answers
RELEVANCY SCORE 37.2

I have had a vista machine for sometime now. But now all of a sudden it is giving me the error "Cannot access DNS server". I tried running it in Safe mode with Networking and it works fine.
I am going crazy trying to figure what might be the issue.
 

A:Vista: Cannot access DNS server

Top suspect would be either a firewall configuration change or some malware.

Let's start with the obvious and disable ALL firewalls and see if that changes the situation.

Next, let's do a stack repair in normal mode first.

TCP/IP stack repair options for use with Windows Vista.

Start, All Programs\Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.

In the command prompt window that opens, type type the following commands:

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log

Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log

Reboot the machine.

Finally, also in normal mode, please do the following tests.
Try these simple tests.

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

In the command prompt window that opens, type type the following commands one at a time, followed by the Enter key:

NOTE: For the items below in red surrounded with < >, see comments below for the actual information content, they are value substitutions from the previous command output!

IPCONFIG /ALL

PING <computer_IP_address>

PING <default_gateway_address>

PING <dns_servers>

PING 206.190.60.37

PING yahoo.com

Right click in the command window and choose Select All, then hit Enter to copy the contents to the cl... Read more

Read other 1 answers
RELEVANCY SCORE 37.2

I'm trying to add an ME box to W2k server (set up as a domain server)

The ME box can see and access files on the server BUT the server cannot access the ME machine"the account is not authorised to log in from this station" is what comes up when you try to enter the ME machine from the server
I know I came up with this before but I can't get it to work again.

2000 boxes have No probs?????
 

Read other answers
RELEVANCY SCORE 37.2

I'm trying to get an NT Server on the domain. For some reason it is showing up as a Work Group and I need it on the domain. Actually, maybe it doesn't matter but I can't access it from other computers on the network. How do you fix a server so it can be accessed from other computers on the network???
 

A:NT Server access on domain

I dont know if you have done this but, enter the server's machine name in Server Manger on the Primary Domain Controller. At the new server go to Start>Setting>Control Panel>Network>Identification>Change
enter the server Computer Name, click Member of Domain and enter the Domain name, click OK. After the machine restarts you may need to click on the pull down box to select the Domain you are logging on to. It usually defaults to the local machine name on first login.
 

Read other 3 answers
RELEVANCY SCORE 37.2

Here is my Hijack this Report Logfile of HijackThis v1.99.1Scan saved at 11:44:51 PM, on 5/2/2006Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\LEXBCES.EXEC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\system32\LEXPPS.EXEC:\WINDOWS\System32\nvsvc32.exeC:\Program Files\Common Files\Symantec Shared\SNDSrvc.exeC:\Program Files\Alcohol Soft\Alcohol 120\StarWind\StarWindService.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\System32\MsPMSPSv.exeC:\WINDOWS\system32\Ati2evxx.exeC:\WINDOWS\Explorer.EXEC:\Program Files\iTunes\iTunesHelper.exeC:\WINDOWS\System32\spool\DRIVERS\W32X86\3\E_FATIAIA.EXEC:\Program Files\PeerGuardian2\pg2.exeC:\Program Files\iPod\bin\iPodService.exeC:\Program Files\Yahoo!\messenger\ymsgr_tray.exeC:\WINDOWS\System32\spool\DRIVERS\W32X86\3\E_FATIAIA.EXEC:\Program Files&... Read more

A:Can't Access My Web Server All Of A Sudden

Hello Disturbed 1 and welcome to the BC HijackThis forum. I do not see any signs of viruses or malware in the log. There are a couple of housekeeping items we can clean up so let's do that while you are here.ImportantYour copy of HijackThis needs to be in a folder of it's own. If it is run from Temporary folders the backups and HijackThis itself could be accidentally deleted if the Temporary folders are cleaned. If it is run from the desktop then the backup files and folders can clutter up the desktop and be accidentally deleted. If it is run from inside a compressed file then the backups are not created at all.Please open My ComputerDouble-click on Local Disk (C:)Click on the File menu, point to New and then click on Folder. Name the folder 'HijackThis' or 'HJT'.Unzip to or copy and paste HijackThis.exe to the new folder (do not run HijackThis directly out of the sfx or compressed file).Now start HijackThis and click the Scan button to perform a scan. Look for the following items and click in the checkbox in front of each item to select it:R0 - HKLM\Software\Microsoft\Internet Explorer\Search,SearchAssistant =O3 - Toolbar: (no name) - {2CDE1A7D-A478-4291-BF31-E1B4C16F92EB} - (no file)Now close ALL open windows except HijackThis and click the Fix Checked button to finish the repair.Other than that the log looks good. I do not see any anti-virus or firewall installed and would highly recommend that you at least get those on this system. Here are some free v... Read more

Read other 1 answers