Over 1 million tech questions and answers.

Reset to device, \Device\RaidPort0, was issued. Event id: 129 storahci

Q: Reset to device, \Device\RaidPort0, was issued. Event id: 129 storahci

Hi,
I have a DELL XPS 13 9343.I have made a Clean install of Windows 10 and downloaded drivers from dell.com.I am also running Hyper-V.I get repeated Warnings in my System Envent Viewer saying:
Reset to device, \Device\RaidPort0, was issued.Source: storahci
Just Before i get these events my computer freezes for 10-20 sec. and I can´t do anything.This is very anoying and I hope there is a fix for this?Thanks in advance.

RELEVANCY SCORE 200
Preferred Solution: Reset to device, \Device\RaidPort0, was issued. Event id: 129 storahci

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Reset to device, \Device\RaidPort0, was issued. Event id: 129 storahci

I am also experiencing this issue on an Inspiron 7437 and have been attempting to find a solution for several months now. I have done clean installs of windows 10 as well and I have posted on the Dell forums with no response. Same exact issue except the source for me is iaStora.

Read other 13 answers
RELEVANCY SCORE 180

Our disk drive light was always flashing so we checked the event log.  Every 4-6 seconds an iaStorAVC warning 129 is entered in the event log as: Reset to device, \Device\RaidPort0, was issued.
Whatever is going on every few seconds has to be bogging down our HP Pavilion Media Center computer running Windows 10.  Our system has an SSD boot drive installed a year ago and a new 6TB Western Digital Black data drive that replaced a failing Western
Digital 4TB Blue drive.  We used to use RAID on this machine, but now have just the two independent drives listed above.  What is generating this warning, how is it affecting our system performance, and how can we stop it from happening?

Read other answers
RELEVANCY SCORE 180

I have this event in event veiwer and i havent noticed anything out of the ordinary currently Regardless of my computer having some other issues currently. I have read some forums and some of the microsoft forums are saying that it is not a microsoft
issue (hope my post helps direct those who dont know that if that is the case) I am wondering if having the storage controllers enabled are throwing up this warning?

Log Name:      System
Source:        amd_sata
Date:          7/20/2012 11:16:54 AM
Event ID:      129
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      Bill-PC-1
Description:
Reset to device, \Device\RaidPort0, was issued.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="amd_sata" />
    <EventID Qualifiers="32772">129</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2012-07-20T16:16:54.900559300Z... Read more

A:Event 129, amd_sata Reset to device, \Device\RaidPort0, was issued.

Jraid.sys is part of JMicron JMB36X RAID Driver developed by JMicron Technology. The event log means if a device is not working properly,  its driver fails to load when Windows starts. If you don't configure RAID, you can disable these controllers.

Meanwhile, please update the BIOS, chipset, controller driver from computer manufacturer's website manually for a test.
Niki Han
TechNet Community Support

Read other 15 answers
RELEVANCY SCORE 153.6

this happens to me sometimes. like once or twice a day. The whole system freezes form minute or so then.
I dont know what to do. I dont even use raid. How can i detect which hard disk is raidport0?
can anybody help me? :(

Im using
gigabyte 7vt600p
athlon 2600+
geforce 7600
main hard drive is western digital sata
i also have old ata disk in computer

A:Reset to device, \Device\RaidPort0, was issued.

here is aditional information
Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="viamraid" />
<EventID Qualifiers="32772">129</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2008-06-18T09:07:42.865Z" />
<EventRecordID>28414</EventRecordID>
<Channel>System</Channel>
<Computer>Alessio-PC</Computer>
<Security />
</System>
- <EventData>
<Data>\Device\RaidPort0</Data>
<Binary>0F001800010000000000000081000480040000000000000000000000000000000000000000000000000000000000000000000000810004800000000000000000</Binary>
</EventData>
</Event>


what is that viamraid?

Read other 2 answers
RELEVANCY SCORE 145.6

Hi,
Im experiencing sound stuttering on Windows 8, no problems on win7. Using Asus Xonar U3 with latest audio drivers, same issue with built in Conexant with latest drivers. Attaching xperf
file. Have You any ideas how to fix it?
Regards

A:Windows 8 ssd freeze "Reset to device, \Device\RaidPort0, was issued."

Hello,
I wrote again to Intel and Microsoft. Microsoft said that Intel should fix it and Intel said that they dont give a shit so we are on our own but i've found a workaround to minimize this problem!
Use generic Microsoft driver (NO INTEL RAPID STORAGE DRIVER)
Fix by me
Easy way:
1. Download this file - www.godlike.hekko.pl/inne/NoLPM.reg
2. Apply it to the registry (just 2x click)
3. Restart your computer
4. Sound will now stutter very rarely and if it does then just restart PC. It won't stay after reboot as it was before.
Expert way:
1.Open Regedit
2. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci\Parameters\Device
3. There's undocumented registry value NoLPM. As far as I know no one knows about it and no info on the internet. I found it by myself when searching for fix in the registry.
4. As you can see there are blacklisted drive names there but there's no our drive there and that's the problem
5. Remove all values completely then insert * and do line break after(VERY IMPORTANT)
It has to be that value:
*LINE BREAK
6. Your drive will now be blacklisted and LPM command wont be send ever
7. Restart your computer
8. Sound will now stutter very rarely and if it does then just restart PC. It won't stay after reboot as it was before.

Best regards

Read other 18 answers
RELEVANCY SCORE 143.2

Hi, I get random freezes on my pc and when I check windows event viewer, I see "Reset to device, \Device\RaidPort0, was issued.", Event ID 129. Any idea why this could be happening? I've checked my RAM, ran chkdsk on both of my drives(SSD AND HDD), and also ran "sfc /scannow". How can I fix this freezing? I have also installed the latest drivers for everything.

Mobo: Gigabyte GA-F2A88XM-D3H Micro ATX FM2+

HDD: WD 1TB Blue

SSD: SanDisk SSD Plus, 120 gb

Windows 10, 64 bit

GPU- R9 270X Asus

CPU- A10 7700K
 

Read other answers
RELEVANCY SCORE 143.2

I hope someone can help, I'm pulling my hair out over this.
I have 16 new latitude E5470 laptops in a classroom that intermittently freeze and hang up, and there are a lot of "Reset to device, \Device\RaidPort0, was issued", Source iaStorA, Event ID 129 events in the system event log.They all have the same Windows 7 SP1 64bit image.It's random and intermittent.They were originally configured with the BIOS SATA config set to RAID; I changed it to AHCI but that didn't help.I've run Dell System Detect so they all have the most recent drivers and BIOS updates from Dell.I've set the PCI Express Link State Power Management to "OFF".I've seen the verified solution in this thread: en.community.dell.com/.../19658497, but those registry entries are not present in these laptops.I've disabled the Intel SpeedStep in the BIOS
It's really annoying because I can make a change that I hope will help, and they seem to work fine when I check them during the day, but by the next morning most of them have frozen again.
Thanks in advance for any help

Read other answers
RELEVANCY SCORE 138

Hi

when i try to burned one dvd the system shoe me the error "Reset to device, \Device\RaidPort1, was issued."

Specificacion:
MB: MSI k9n sli platinium
chipset: NVIDIA? nForce 570 SLI MCP
MEM: 4 gigas
HD: 3 hard disk (2x80 gigas and 1 500 gigas) all in diferent port sata and without
particion
DVD BURN SAMSUNG
T.V. Nvidia 9800 GT 1 giga
CPU AMD X2 4000

in another computer with other specification and another dvd burn show me the next error

"An error was detected on device \Device\CdRom0 during a paging operation."
Specificacion:
MB: ELITEGROUP a7800GM
chipset: ATI
MEM: 2 gigas
HD: 1 hard disk (250 gigas) all in diferent port sata and without particion
CPU AMD X2 4000

i have windows 7 64 bit in both with full update and without service pak 1

A:EVENT ID 129 Reset to device, \Device\RaidPort1, was issued.

So I've been having this issue as well, since I know how frustrating it is to have PC problems figure I'd report back with my findings

I was spending hours troubleshooting my raid array, drivers, etc...Turns out just by re-seating the sata cables/molex connectors on the mother board and the drives themselves solved the issue. I ran my PC for about 6 hours last night and no errors whereas before I used to get them every 15-20 seconds.

Hope this helps everyone!

Read other 2 answers
RELEVANCY SCORE 122.8

I don’t know what to do next with creeping Event ID 129, iaStorA “Reset to device, \Device\RaidPort0, was issued.” on my Precision M4700 running Win7/64 SP1.
I don’t know exactly when it started (but at least 2 months ago, the approx. size of my Windows System log), but lately I noticed unexpected system freezes; since they mostly (if not always) happen when I launch or use a particular, demanding application, I first thought it was a software problem.
But eventually I had the idea to look at the Windows logs, and noticed a relatively large number of Event ID 129, iaStorA “Reset to device, \Device\RaidPort0, was issued.” which, as I understand it, is a symptom of a low-level hardware issue with the (system) disk or controller. And I then noticed that these Events appeared right after the system “freezes”, which can be as soft as that app freezing (and then, one of the CPU cores is maxed out for process “System Interrupts – Deferred Procedure Calls and Interrupt Service Routines”: as soon as this process drops its CPU usage back to normal, the app “unfreezes” and finishes to load/work) or as hard as the system becoming severely unresponsive, with mouse and cursor locked etc.
I ran the Dell diagnostics on this system, and neither the disk nor the other hardware components reported issues there. Digging deeper, I eventually noticed an “abnormal” number of ECC errors for the offending disk S... Read more

Read other answers
RELEVANCY SCORE 119.6

Hi,

First, I would like to start off by saying that this is not a Windows 8 exclusive problem, I've had it in Windows 7 and upon install to Windows 8, it still occurs, which is leading me to the conclusion that this is a hardware problem.

Ever since I built my machine in early 2014, it seems like it randomly freezes, there doesn't seem to be any root cause behind the freezing. During the freezing, it's 'responsive' but anything that requires disk access does not work, the drive indicator light on my case stays solid. I've also noticed especially lately, that when I play GTA San Andreas (a multiplayer extension) that my game tends to randomly freeze and if I unplug a USB and plug it back in, it usually unfreezes, if not, when I hit the power button, it instantly unfreezes (this freeze actually locks everything up, not just the disk); when playing BF3, it doesn't happen, but GTA SA is a pretty old game.
Also, on occasion, when shutting down my computer (sometimes abruptly due to above problems), the HDD isn't always detected, in that case if I unplug and re-plugin the SATA wire, it usually fixes it.

I run what I feel is a pretty typical setup, a FX-6300, a MSI 970a-G46 motherboard, 8GB of G.SKILL Ripjaw's, and a HD 6870 as a GPU. I've tried changing my drive controller mode from IDE to AHCI, which did seem to help with decreasing the frequency of the freezing, but it still occurs.
I'll list some things I've done as troubleshooting:
-Replaced my old HDD with a new WD Black
-... Read more

A:Random freezing - 'Reset to device, \Device\RaidPort0'

First, there aren't any real, 100% effective tests for motherboards.
It's too expensive to make a test for a product that has such a limited life-span.

Without any reports, it's difficult to offer an opinion here.
I'd suggest that you provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum): Blue Screen of Death (BSOD) Posting Instructions Please use Option 1 as it provides Event Viewer logs.

From your description, it appears that you've done a good job of troubleshooting this.
You've ruled out the hard drive and the video card - those are the major concerns with errors like these.

You've also noted an issue with the USB ports.
Did you try the ports in the back of the system to see if they act the same as those in the front? I realize that this may be difficult as you've stated that the ports usually help in fixing the freezes
If it's only the front ports, then it's possible that they're defective (and causing issues w/the mobo) - but if it's the back ports also, then it's (IMO) most likely the mobo

If you can get an RMA, this would be the easiest way to rule out the motherboard.
It depends on what you installed/connected to the motherboard - but in most cases if the problems continue after reinstalling the OS, then it's likely to be a hardware problem. Each extra thing that's installed/connected increases the chance that it may be something other than the motherboard.

I had disk access problems with a Win7 system... Read more

Read other 4 answers
RELEVANCY SCORE 113.2

This is a problem with my own laptop, and I've just updated by specs.

I almost exclusively use IE11 and it's been freezing up a lot lately for 30 seconds to a minute. I've done the whole checking for malware (Malwarebytes, JRT, ESET Online Scanner, ADWCleaner), as well as a reset to IE, and nothing has made a difference.

I checked Event Viewer and saw a whole slew of Reset to device, \Device\RaidPort0, was issued messages under System with a Source of amdsata.

I've downloaded and run Speccy if you need any more details for my system.

A:Reset to device, \Device\RaidPort0

Did you try Internet Explorer (No Add-Ons) - Open?
How about Safe Mode with Networking? Safe Mode
Or another user account? User Account - Create

RaidPort0: That's possibly your HDD (or perhaps the DVD drive). You can check the HDD health with its manufacturer's tools.
Also, check in BIOS what SATA Operation Mode are you in - AHCI or RAID?

Read other 2 answers
RELEVANCY SCORE 94

Hi guys, found this site while looking around online for advice and am hoping someone can help.

My system is 18 month old and on and off as had problems with crashing, up to recently it has always been a kernel power 41 error but only happened occasionally so I just put up with it.

Recently the system has been hanging completely, sometimes I'll get a "windows explorer has stopped responding" message but the system is usually non responsive so I have to force shut down.

I have attached screenshots of the event viewer error log and of speedfan as I'm not sure if it may be an overheat problem or not. I have a spare hdd ready to put a new os on if it is the hdd failing, got a feeling it's not going to be that easy though and the mini tower is not the easiest to work with. Any advice or guidance here is welcome

A Happy New Year To You All
 

A:Device: \Device\RaidPort0 Errors

Read other 16 answers
RELEVANCY SCORE 85.6

Hello!

Today I looked through the Event Manager Utility of Windows XP and I've seen this error there, about 15 times.

The device, \Device\Harddisk2\D, has a bad block.

Event 7.

Does this mean that I have a bad on my HDD or could it be some error, like windows can't read a corrupted file?
Thank you!
 

A:The device, \Device\Harddisk2\D, has a bad block. - Event 7 in Event Manger.

Backing it up and reformatting it may help. Before that, error check it.
 

Read other 1 answers
RELEVANCY SCORE 84.8

I am getting four megasas2 as Source with Event ID 11 errors in succession in Event Viewer on a computer running Windows 8.1 every time the computer goes to Sleep or Hibernates. On the General tab, it says: "The driver detected a controller error on \Device\RaidPort0." I have a LSI RAID Controller using the next to the latest firmware and drivers. I updated drivers and firmware to the latest version for Windows 8.1 and my computer became almost totally unusable! I have an ASUS Sabertooth 990FX Rev 2.0 motherboard with the latest AMD chipset drivers but they are for Windows 8.

I have attached a zip file showing the Events, for your reference. I have contacted both LSI and ASUS about this issue.

Does anyone know why am I getting these errors?

Thanks

Read other answers
RELEVANCY SCORE 82

I have a 5-year-old Asus z70Va laptop. The hard drive is a PATA, and the system is running XP Home SP3. The problem I am about to describe started roughly a year ago, and has re-occurred at least 5-6 times.

I will be listening to audio (off the main hdd, not the DVD drive) when the problem starts -- usually streaming audio, though it has also happened twice when Outlook was playing a wav file as part of an Outlook rule I set up to flag emails from a particular sender. Interestingly, the error has *never* occurred when I have been playing a video file with audio.

What happens is that the music will sound as if it is getting "stuck" on one note or passage. It sounds distorted. It may pass quickly, but then will happen again ten-thirty minutes later, even if I stop and later restart the audio file (or stream). Once it recurs, I end up with this message in Event Viewer (System):

Event 9: The device, \Device\Ide\IdePort0, did not respond within the timeout period.

If I don't stop the audio immediately, the distorted and very discordant "stuck" audio continues, leading to a series of Event 9's before I can stop the player. But about every other time that happens, I *can't* stop the player; instead the computer freezes up (sometimes going to a BSOD), and when I restart I find that I now also have a series of bad block errors on a previously clean drive (usually 2 bad clusters).

So I end up replacing the drive, but then a month or two later the... Read more

A:Strictly Audio-Related Serious Event 9 Errors (The device, \Device\Ide\IdePort0...)

The audio is just a coincidence, not a symptom.

Bad sectors are a sign of a hardware issue with the HDD. Software won't cause bad sectors on a HDD. I'd suspect a bad HDD. If you have replaced the HDD multiple times, then there is an underlying hardware issue (ie: motherboard/controller issue or power).

Also, if you have to "whack" anything, there is a hardware issue. It's typically a sign of a loose of faulty connection. Otherwise "whacking" it wouldn't do anything.
 

Read other 3 answers
RELEVANCY SCORE 71.2

I upgraded to Windows 10 a while back. Every time I open the computer I get a pop-up notification telling me the USB device is unrecognized. I have no USB devices in any of my 3 USB ports.
I sent my computer in twice. No help. They just uninstalled everything and reinstalled everything and told me it should be fixed. It is not. I then went about updating every driver in my Device Manager. I uninstalled the Unknown USB Device and then updated
other drivers. Certain drivers (such as PCI Express Root Port #3 - 9C14) when updating would also reinstall the Unknown USB Device, which I would then uninstall and keep working down the list. At the end of updating EVERYTHING I scanned for hardware changes
and "found" the Unknown USB Device. 
From what I can tell, and I know very little about this stuff, my computer can't name one of my USB ports. Since it can't figure out what it's called it can't download the proper driver for it. Since it can't download the proper driver it can't work properly.
The practical result from this is that one of my three USB ports does nothing when I put in any USB item (connect my android phone, thumb drive, presentation clicker, etc).
I've looked on tons of forums. My current thought is that if I can tell my computer what the deice is or download the right driver and tell my computer to use that driver for this device it should solve my issue. But I don't know how to know what the name
of the USB port should be (I imagine it woul... Read more

Read other answers
RELEVANCY SCORE 68

Windows 8.1 Pro x64 - please find the complete system log warning details below and a (related or not?) disk controller error below.  Motherboard is an ASRock B75 Pro 3 with an Intel B75 Chipset.
I keep getting these warnings.  I get them for all my Windows Portable Devices (disk drives) on boot up.  Here are my disks:
Disk 0 on internal SATA 3 connector off an
ASMedia ASM1061 chip on motherboard (internal drive, but enumerated as removable) - Seagate ST100DM003-1CH162 D: data drive
Disk 1 on internal SATA 3 connector off the B75 chipset on motherboard (internal drive, not enumerated as removable - gives no warnings or errors - Seagate ST100DM003-1CH162 C: system drive (has Windows 8.1 OS on it)
Disk (2 or 3 depends on order of USB connection) on external USB 2.0 connector off back I/O panel of motherboard - Kingston DT 101 II USB device F: backup thumb drive
Disk (2 or 3 - depends on order of USB connection) on external USB 3.0 connector off back I/O panel of motherboard - Seagate BlackArmor DAS35 USB device G: backup external hard drive
There are no symptoms other than another (probably unrelated) disk controller error (shown below).  The controller error is on either drive 2 or 3, but never 0 or 1, so it is one of the external back up drives (the thumb drive or the BlackArmor drive).
 Note that on boot up I get the warning for disk 0 above whether or not the external drives are connected so the disk controller error may be unrel... Read more

Read other answers
RELEVANCY SCORE 68

Hi,
I have a toshiba notebook satellite and I am trying to burn a DVD and/or CD to a external DVDRW drive.
Everytime I try I get the following alert:
Power on, reset or bus device reset occurred
I have an WIN XP SP2 Professional, and using Roxio and/or Nero for burning.
 

A:Power on, reset or bus device reset occurred

does it happen with both burning programs??
 

Read other 2 answers
RELEVANCY SCORE 65.2

I recently discovered this event error dated 10/18/2013 which is about the time that I upgraded the BIOS and attempted to enable Secure Boot. Enabling Secure Boot worked as far as Windows 8.1 is concerned - eliminated watermark and Secure Boot event errors but the system boot process displayed NO VIDEO during POST and there were 6 beeps and power light flashed 6 times. HP Boot error codes indicates a problem with the video card (AMD Radeon HD 7500). If Secure Boot is turned off, everything works fine. I would like to understand why this event error was reported and how to correct the issue. Is the video hardware not compatible with UEFI and Secure Boot? Did keys get lost that allows Secure Boot to validate this hardware get removed? Although I am happy without Secure Boot, I would like the decision to use Secure Boot to be mine and not because something isn't working correctly.

A:Kernel-PnP Event 420 - PCI Device was Deleted

If Secure Boot is turned off, everything works fine.



It may be due your video card not supporting the GOP protocol which is a requirement for UEFI Secure Boot to function properly. Your graphics card may require a firmware/bios update so check with your manufacturer to see if one is available. You can also try to disable "ultra-fast boot" if enabled in the UEFI BIOS as I am not certain about all of the GOP requirements.

FYI here's are articles on a few manufacturers' progress to make these updates available:

GOP UEFI BIOS update for AMD 7000 Series GPUs

UEFI GOP for Sapphire HD 7850 OC 2GB - Guru3D.com Forums
Hope this points you in the right direction. Good luck.

Read other 5 answers
RELEVANCY SCORE 65.2

Hello from London, and thank you in advance for any advice that helps save my life.

I recently upgraded a Dell Latitude E6400 (old, I know) to Windows 10 and (eventually) optimized for performance. Since the HDD in this laptop is only 75GB I stored most of my data on a Seagate 210GB USB2.0 drive. It was working perfectly for the year I've had it (and the two weeks since Windows10 install) and then a few days ago it can no longer be read by either of my two laptops (the other running Win7).

Device manager shows the drive, but it doesn't show up in This PC. I had also pinned it to the start menu and Quick Access. It has disappeared from the start menu and has a ? in front of the old drive allocation in Quick Access.

Summary of properties by tab:

1. General - Seagate USB 2.0 Cable USB Device / Device Status - This device is working properly
2. Policies - quick removal
3. Volumes - initially blank (dashes), clicked Populate, and the following, highly troubling data populated
Disk Disk 2
Type Unknown
Status Not initialized
Partition Not Applicable
Capacity 2097152 MB
Unallo Sp 0 MB
Rsrvd Sp 0MB
4. Driver - tried uninstalling and reinstalling, reinstalls most current driver each time but with same error (Event ID 441/Kernel-PnP)
5. Details - Disk drive
6. Events - same 3 events occurring every time I try to access the drive: a) device started (disk), b) device configured (disk.inf), and c) device not migrated. The information field reports that "

Device USBSTOR
\Disk&a... Read more

A:USB drive seen by Device Mgr but not This PC - Event ID 441/Kernel-PnP

Bad news first: Your USB hard disk has a damaged partition record and so Windows cannot identify the structure of data in it.

Good news: There are recovery programs that bypass the partition information and search the disk sector-by-sector. After a rather lengthy process they show you a file tree with your data and then you can copy them to another disk. Yes, for obvious reasons they do not allow copying to the same disk, even if you have two or more partitions on it. You will need another disk with enough space for the backup. If you have or can borrow a second computer with enough disk space, you can extract the files there, then format your USB disk and copy the files back. There are many recovery tools for that if you do a little Google research. I use the GetDataBack which unfortunately have to register to be fully working. The unregistered version only shows the files but doesn't allow you to copy them! Probably there are free tools too, sorry I cannot suggest any right now.

Read other 7 answers
RELEVANCY SCORE 64.8

Reset to device, \Device\RaidPort0, was issued.
I am getting this warning and system is hanging on that time.

What does it mean? Google search gives lot of explanation for this. So, I really don't know what could be the real reason

Thanks

A:Reset to device

Try clearing your BIOS.
Clear CMOS - 3 Ways To Clear the CMOS - Reset BIOS

Read other 8 answers
RELEVANCY SCORE 64.8

I'm not sure where to put this. I have windows 7 and when I plug my Sansa Fuze into it, the device home page comes up. My problem is, I change the device name to a custom name and it changes in here as well as Media player, but when I disconnect it and re-connect it, the name resets to the factory name. What am I doing wrong. There is no safely disconnect option for the fuze. Can I rename it, so it actually stays?
 

Read other answers
RELEVANCY SCORE 64.4

Hi, i am having trouble connecting my camera to my PC. It works perfectly on another PC running windows 8.1 pro the same as mine. I open device manager and my device is listed under other devices as canon digital camera, though it has an exclamation mark on it.

In the properties under the general tab I see this

"The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver."

I have tried un-installing the device, rebooting my machine and downloading the drivers from canon (it's an 1100D).

i have tired copying the files that show in the events tab on the other pc and manually install them but I get the following message "Windows encountered a Problem installing the driver for you device, MTP USB Device". Now something that seems weird to me is that my phone has also stopped working as an MTP device though there is no obvious driver issues with it.

Below is an event log from my pc relating to the problem


Code:
Log Name: Microsoft-Windows-Kernel-PnP/ConfigurationSource: Microsoft-Windows-Kernel-PnP
Date: 26/03/2014 20:51:34
Event ID: 400
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: YT-1300
Description:
Device USB\VID_04A9&PID_3217\5&15c311e1&0&5 was configured.
Driver Name: null
Class Guid: {00000000-0000-0000-0000-000000000000}
Driver Date:
Driver Vers... Read more

A:MTP USB Device failed to installed (event log inside)

also have this problem.. is there a solution here sir?

Read other 1 answers
RELEVANCY SCORE 64.4

Windows 7 has been making the device disconnect sound and then the re-connect sound shortly after at a random interval. This has only happened today and I've tied it to Event ID 7036 in Event Viewer. I opened event viewer and refreshed when I heard the sound and checked for differences. There is an Event ID 7036 at the same time as the sound in every case. Each has the description "The Multimedia Class Scheduler Service entered the running/stopped state." What could cause this and why?

Recent hardware changes: plugged in multi-card reader, external hard drive has been plugged in for weeks. I've unplugged the card reader in the meantime to see if that was it. There have been no "device disconnected" bubbles or notifications connected with the noise.

A:Event ID 7036 - Device Disconnect Sound

Hi make and model of your computer please,have you tried different usb port,are you using safely remove,you could try reinstalling the chipset

Read other 3 answers
RELEVANCY SCORE 64

I have been wanting to find a way to reset windows 7 so when I plug in a device into a particular USB port it detects it as though for the very first time (installing device drivers message etc). Disabling or uninstalling drivers do not seem to instigate a 'new device routine'. Any ways of doing this?

The reason I am requesting this is due to a curious issue that I am trying to fix more out of fascination than anything. I have discovered that if I plug in a particular mouse on one particular USB port on one particular installation of Windows 7 (I have another install on a seperate drive for testing), the 'Allow this device to wake computer' tick box makes no difference (ticked or not the mouse click always wakes computer). After extensive testing, its only when that mouse is plugged into that usb port on just one particular installation of windows 7. I was hoping to try resetting windows so it detects that mouse as if for the very first time. Any ideas?

A:USB device detection - Any way to reset it?

Try applying this trick, make sure your mouse is unplugged: How to remove old drivers in Windows 7

I am ssuming you do check the "remove device drivers" checkbox when removing the device? If that's the case you can try a Microsoft Fix It tool: Tips for solving problems with USB devices

Read other 5 answers
RELEVANCY SCORE 64

Hi, its me again working on i7 920 with Windows 7 Home premium 64 Bit. Im having trouble recognizing a Hauppauge 2250 tv card, was working fine before, but i had to do a fresh install of Windows due to a attack on my system. now it says that it doesnt recognize the device yet the software is installed i guess my next step is to contact the manufacturer

A:how to Unrecognize/reset a device?

What does the device come up as in device manager?

Read other 9 answers
RELEVANCY SCORE 64

everytime i plug in my usb microphone, or my usb webcam into a different usb port than where the device was before, windows gives it a new number that i can see in options.

here is what i mean:

the number 3 next to the micrphone means that it is the 3rd different usb port on my computer that i connected that mic to. when i bought the mic first and plugged it into a front usb port for the first time, there was no number there. then i unplugged it and plugged it into a usb port on teh back of my computer and it gave it the number 2. then i plugged it into another usb port on the back and it gave it the number 3 etc etc. this happens with lots of usb devices that i hook up.

how can i reset all those numbers to make it so that there would be no numbers displayed before the name of the device?

A:How can I reset USB device numbers?

Hi,

Do you have a need to move the unit to other USB ports? If not, uninstall the device & then only put it into one port & your done. OK?

Read other 3 answers
RELEVANCY SCORE 63.6

Hello,
Event Viewer error ID 56, "Driver PCI reporting an invalid ID for a child device" has been on my PC since it's first POST in Feburary.

I believe I finally found the source of this error.
But I need some help to fix this.
I"ve attached a pic of the registry and the Renesas Electronics USB 3.0 Host Controller Utility that shows some Accounts Unknown followed by a long set of numbers.

If you have this same software here is where I found it. Orb>All Programs>click Renesas Electronics>click USB 3.0 Host Controller Driver>then right cllick propertied on the USB 3.0 Host Controller Utility then click on the Security Tab. Under the group and user name

How do I fix this? Thanks

A:Event ID 56 Driver PCI reporting invalid ID for a child device

No pic attached
Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file here.

Read other 4 answers
RELEVANCY SCORE 63.6

Hello! I have a PC I assembled last June. After I loaded it up with my applications and connected my devices I began getting device disconnect sounds as well as a few device connect sounds. I've been troubleshooting by disconnecting all devices then adding devices back one at a time to try to find the culprit. I'm not getting consistent or convincing results so far, but will keep working on that approach.

A Web search on the subject returns lots of results where users are experiencing these sounds. Answers are sparse. And antagonizing! I have not found any hints as to how to extract from the system what is actually happening. What I am looking for is if anybody knows where in the system I can find a log that records device connect/disconnect events associated with these sounds. Anybody have a clue?

CASE Cooler Master HAF 912 RC-912-KKN1 Mid Tower
MOTHERBOARD ASUS P8P67 Deluxe LGA (P67 B3 Rev)
CPU Intel BX80623I72600K Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost)
CPU Heat Sink Cooler Master GeminII S RR-CCH-PBU1-GP 120mm Sleeve
DRAM 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model CT2KIT51264BA1339
ZOTAC ZT-40503-10L GeForce GTS 450 (Fermi) 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
PSU Cooler Master Silent Pro Gold Series RS800-80GAD3-US 800W
DRIVE0 (O/S) OCZ VTX3MI-25SAT3-120G Vertex 3 MAX IOPS Edition 2.5" 120GB SATA III MLC Internal Solid State Drive (SSD)
DRIVE1 (Data) Hitachi UltraStar A7K2000 0F... Read more

A:How to find Device Disconnect event in Win7 logs?

Dave

The best place to start is in event viewer. You want to do whatever you need to cause the problem and look in event viewer around that time.

There are several ways to find what the problem is. The best is to go into event viewer (type eventvwr in search). Event viewer (local) and look for the critical errors listed in the last day, week, etc. Then go to the windows log>application tab. Finally the windows Logs>system tabs.

You want to look for critical errors (they have red in the left column ). If nothing critical is related to the problem keep looking it is there.

When you find them please note the event ID, and the source codes and tell us what they are.

Read other 5 answers
RELEVANCY SCORE 63.6

hello,

i was wondering if anyone has an idea how to set the wireless nic device name back to original because mine had changed from device #2, device #3, etc. it happened when i was uninstalling the device and its drivers for several times at a row, maybe i was finally able to delete it but when i rebooted windows re-detected the device as i mentioned. i'm using an acer laptop with vista installed. the wireless nic is broadcom 43xx. i scanned through the registry using the device name but failed. is it stored elsewhere like a profile or ini file or something. hope anyone can shed a light. thanks

Read other answers
RELEVANCY SCORE 63.6

Hi there.

Firstly, please accept my apologies if I'm posting this in an inappropriate forum.

The problem I'm experiencing relates to burning anything to DVD or CD.

I'm running WinXP, using a basic Dell Dimension 5150 with their bog-standard DVD player/writer. I'm using ConvertXtoDVD to burn my DVDs and I also have Roxio RecordNow installed.

Burning DVDs and ordinary CDs has been without problem ever since I bought the computer (about 4 years ago now), however I'm now seeing my burn freeze at around 30% and I've had, on the first occasion, the following error reading:

Unit attention, Power On or Bus device reset occured

I've searched Google for answers, but this appears to be a problem particular to individual set-ups. So I was wondering if anyone here can lend a hand. I'd be most appreciative.

Incidentally, (in case this is relevant) my startup programmes are as follows:

NvCpl
stsystra.exe
DLACTRLW.EXE
MSKDectc
REGSHAVE
jusched
zlclient
realched
qtask
ctfmon
DAP
DSLMON

I have disabled the following at startup:

DSAgnt
DMXLauncher.exe
HPWuSchd2.exe
isuspm
issch
iTunesHelper
FirstStart
qttask
Application Launcher (Sony Ericsson)
realsched
XrxFTPLt
HP Digital Imaging Monitor

If there's any further information you require, please let me know.

I really hope someone can help me

Many thanks for your time.

Tim

Read other answers
RELEVANCY SCORE 63.6

I did a fresh install of w7 and have an issue where as after returning from hibernation. My usb devices are reset. I can hear the windows sound of a usb device being unplugged/plugged in. The problem is that this causes the software which was using the device to no longer work without being restarted.

Returning from standby works perfectly. No devices are reset, and all is well.

I have read that you can add devices to this 'reset list'. But I would like to remove the ones having a problem, or all of them for that matter.

Is this possible?

Thanks
Chris

A:Can I remove a usb device from the 'reset list'

On the lower right of your screen, near the time and date. There is or should be a very small icon. If you click on it, you can find out if you can remove the device. If you do not see it, some of your icons may be hidden, you can click on an icon in the same area to show those hidden icons. Cannot find? Go to help, you will be able to find how to utilize the eject icon.

Read other 4 answers
RELEVANCY SCORE 63.6

I am facing a problem with my device. it is not responding to most of the applications like Microsoft Word, or even Firefox. i tried restoring it, but recovery was never complete. it always stops at "Doing few things first 1%"  I also tried uninstalling some applications but they all failed to uninstall.  what do you recommend me doing? and is there any place i can go to fix it? Appretiate the Assistance

A:Device not responding, and Reset is not complete

@waynehosn Hello;Allow me to welcome you to the HP forums!I see you're running Win10. Did the PC come preinstalled with Win10? Or, did you upgrade it from a prior OS to Win10?This is important as the recovery/reset method is different for the two situations.We can proceed when you provide the answers.

Read other 2 answers
RELEVANCY SCORE 63.2

i have acer e1-571 notebook.running windows 10.from last few days my pc giving this error-Currently, this hardware device is not connected to the computer. (Code 45)

To fix this problem, reconnect this hardware device to the computer.

A request for the USB device descriptor failed.                                                            
                                                                i have tried all kind of suggestions
given by microsoft related this problem .but   cant solved.card reader ,pen drive ,external keyboard ,or external mouse no one working.2.some  random  keys  is not working .please fix my issue .

Read other answers
RELEVANCY SCORE 63.2

hi...I am completely frustrated by this damned thing...i have read the other threads to get to this point but cannot find anything specifically like this.....normal blue screen problem...have checked system log..which says SYSTEM ERROR category 102 event 1003 Error code 000000c2...parameter 1... 00000007 Parameter 2... 00000cd4 Parameter 3....00000000 Parameter 4 .....e2538008.. has anyone got a clue about this...pls help...thanks and regards russell
 

Read other answers
RELEVANCY SCORE 63.2

I want to schedule a windows task to run when a secondary output device (e.g., VGA monitor or HDMI A/V receiver is turned on or off)
but I'm not sure which event should be used for this. I found something related to network cable plug/unplug here How
to launch a command on network connection/disconnection? basically, the event is


Log: Microsoft-Windows-NetworkProfile/Operational
Source: NetworkProfile
Event ID: 10000
for connect and 10001 for disconnect

but couldn't find anything for external audio/video devices. Any such event or events exist? If not,
any other way to do this? Thanks

Read other answers
RELEVANCY SCORE 63.2

When I plug in my Wacom tablet ctl-460, it shows Event ID 257: A pointer device reported a bad angular physical
range. in the Event Viewer. I've been looking around for answerers and I stubbed upon this some sort of fix from this  thread with the steps listed below 



1. Open a command prompt
2. Type in diskpart
3. Type list volume
4. Type select volume #  
5. Type extend [size=n] [disk=n]



https://social.technet.microsoft.com/Forums/security/en-US/a51d8312-37bf-420a-81ab-92f68428e83c/error-invalid-parameter-when-trying-to-extend-volume-in-windows-server-2012?forum=winserverfiles


I don't know if its the same right fix for my issue and also when I tried doing the steps above, I get stuck on Step 4.

If this is the wrong thread for this type issue, please let me know and I would appreciate any help on solving this irritating Warning in the Event Viewer.  

Read other answers
RELEVANCY SCORE 62.8

Received the BSOD on Saturday for no apparent reason - no device or driver changes etc, system was fully up to date with Windows Updates. Original failure message was that it was something to do with power drivers.

Attempted booting to Safe Mode but would not accept any passwords or PINS etc.

Reluctantly decided to reset PC via control panel but still not working.

Last resort was to re-install Win 10 via the DVD I made using the Media Creation Tool when I first installed Win 10 in August 2015 (upgraded from existing Win 7 HP 64 bit to Win 10 64 bit), I used the 2nd option (ie not the upgrade option) to do this so that I was able to specify which drive to install the OS - My main drive is partitioned between data & system, I chose the system partition to re-install Win 10.

The upgrade appears to work all the way through until the PC reboots for what appears to be the final time and "loading devices" starts - I've left this overnight to slowly work things out but it still keeps stating that after numerous attempts the PC cannot load the OS & needs to be reset - ie no further forward.

Read other answers
RELEVANCY SCORE 62.8

I am trying to play this computer game but when I click on play, it brings up this message saying (Could Not Reset Direct 3D Device, this application will now close) I tried downloading DirectX again but it didnt work...I need help.

Edit: Please use proper thread titles from now on. Thanks.
 

A:Could Not Reset Direct 3D Device, this application will now close.

One minute before your first begging post amaizing....
 

Read other 11 answers
RELEVANCY SCORE 62.8

windows 10 user , my usb ports are working fine but when i insert a usb , it doesnt read , when i go to my device manager it says that it has stopped because of code 43 , i tried installing and re installin , enabling and disabling but nothing is changing , please help? i dont know what to do anymore

Read other answers
RELEVANCY SCORE 62.8

Hello, I need help with my Lenovo Y500 in which I bought about a year ago. My OS is Windows 10 and I decided to do a factory reset to wipe out my drive. While I selected that, it brought me to a black screen, so After a couple of minutes I turned it off and back on. After that, it just shows the Lenovo logo over and over and it won't stop. I tried F2 BIOS stuff and I keep getting no bootable device, and the two boot options are EFI Network 0 for IPv4 and IPv6. No other options work, and I'm sorry I'm not good with computers. I want to find a home fix because I currently don't have money to take it to the repair shop. I have attatched a photo here on my laptops information. Thank you guys so much! 

























image.jpg ?1012 KB

Read other answers
RELEVANCY SCORE 62.8

Hello dear forum members.

I have an issue with my Satellite L50D-B-15Z p/n: psule.

So I decided to reset it to the original factory condition. After it finished recovery, I pressed finish. The notebook turned off itself and did not restarted. So i pressed the power button and a massage popped up on the screen that no bootable device. In the bios the toshiba hdd is present, secureboot is enabled.

Any suggestion?

A:No bootable device after completing factory reset

Update.
Something happened and a hdd is just empty. No recovery partition onlt 700 gigs unallocated healty space. From where can I get the recovery disks?






Originally Posted by achiles


Hello dear forum members.

I have an issue with my Satellite l50d-b-15z p/n: psule.

So I decided to reset it to the original factory condition. After it finished recovery, I pressed finish. The notebook turned off itself and did not restarted. So i pressed the power button and a massage popped up on the screen that no bootable device. In the bios the toshiba hdd is present, secureboot is enabled.

Any suggestion?

Read other 2 answers
RELEVANCY SCORE 62.4

OK Now this is getting very annoying. Apparently this problem has been going on for a long time (Since 05/23/05) but so infrequently that I haven't realized it. And no, I don't remember what I might have down then to start this problem.

Now I'm getting the BSOD at least once a day. The last time I wrote down the text and it listed the following "DRIVER_IRQL_NOT_LESS_OR_EQUAL

When I look into the event view the error lists the source as the Service Control Manager. The detailed description states:

"The USB SECURITY DEVICE service failed to start due to the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. "

I have no idea what might have started this but I do know that it suddenly got much worse after I replaced my power supply. (The Fan Died and I shut down gracefully as soon as I got the first wiff or burnt electronics.) All has worked fine since then except for the increased Frequency of this BSOD.

I'll add my full system specs as soon as I get them from the everest pgm I just downloaded.
 

A:BSOD-Event Vwr points to SCM & USB SECURITY DEVICE service failed to start

Hi GScooter,

I've investigate your minidumps and it is faulty ram. You can run memtest to stress the ram. If memtest reports the ram is faulty, ram is bad. However Memtest is not a perfect tool to test the memory as some faulty can pass memtest.

Suggestion
1. Reseat the memory stick to another memory slot
2. Downclock the ram
3. Clean the inside the computer case
4. Make sure that the ram is compatible to the motherboard
If it still crashes, diagnostic which memory stick is faulty
1. Take out one memory stick. If windows does not crash, the removed memory stick is faulty.
2. If you have only one memory stick, replace the ram
 

Read other 1 answers
RELEVANCY SCORE 62.4

Randomly, while browsing the internet, the computer crashes but never a BSOD.
In device manager, the Intel Management Engine Interface driver has the "yellow" caution icon, but I have updated this driver a few times from Intel download center but nothing....

From Event Viewer...
It also says the "Intel Management Engine Interface driver has failed to perform handshake with the firmware" which is an event ID 3, source MEIx64
This does not while playing flight simulator for a few hours though, strangely enough.

After a crash, I look in the event viewer and notice it's right after "Driver PCI returned invalid for a child device (FFFFFFFFFFFFFFFF00) Event ID 56, Source: application pop up.

What I have done so far...
I have updated all of the intel drivers (chipset, Intel management interface, etc, flashed the BIOS to see if that was the cause, took out my graphics card and plugged it back in, updated the graphics drivers, restarted a few times, checked the temperature of the cpu and gpu but all within normal limits. Cleaned the computer out (minimal dust). Front and rear fans are on the "medium" speed setting.

I took out the ram and put them back in. No change.

I tried a few different BIOS settings, first with the default settings and then trying with the manual tuning or automatic tuning (turbo boost) and still nothing.

I have used the cmd file and have done a memory diagnostic, chkdsk and used Advanced System Care Pro to see if it coul... Read more

A:Event ID 56 causing freeze/hang andcrash (Invalid ID for child device)

Also, I notice that sometimes the Event ID 56 etc etc sometimes may not actually cause the crash... sometimes the computer may flash the screen (it did this one time) but went back to normal. Apparently, this error happens often and sometimes may not crash the computer. However, after a crash, I will check the time in the event viewer and this error occurs right before the crash...

Read other 8 answers
RELEVANCY SCORE 62

I just finished building my pc (my first time). When I turned the power on for the first time, it says

"reset and select proper boot device"

It doesn't even get to the BIOS or allow me to access it. I'm not sure what the problem is, loose IDE cable or other cable? I've checked all the connections and they seem to be secure.

Any suggestions?

Thanks in advance.
 

A:reset and select proper boot device during bootup

Read other 7 answers
RELEVANCY SCORE 61.6

Hi,
I frequently notice device enumeration issues which often get resolved once I remove and reconnect the USB Device.
This is the error I noticed in the Event Logs at the time of error:

Fault bucket , type 0
Event Name: PnPRequestAdditionalSoftware
Response: Not available
Cab Id: 0

Problem signature:
P1: x64
P2: USB\VID_0404&PID_040B&REV_012=
P3: 6.1.1.0
P4: 0409
P5: input.inf
P6: *
P7: 
P8: 
P9: 
P10: 

Attached files:

These files may be available here:
C:\Users\buser\AppData\Local\Microsoft\Windows\WER\ReportQueue\NonCritical_x64_d3b44a8d974ca9a71d6a42d9e79968d4f2d893_2ebcf8d6

Analysis symbol: 
Rechecking for solution: 0
Report Id: 3a22f79e-a19b-11e9-91c7-f04da2204020
Report Status: 4
Hashed bucket: %22
Cab Guid: %23


Can you please help me understand what the above error indicates?

Read other answers