Over 1 million tech questions and answers.

BSOD - ntoskrnl.exe "driver power state failure" at shutdown

Q: BSOD - ntoskrnl.exe "driver power state failure" at shutdown

I'm getting a BSOD pretty much every time I shutdown the PC. Has only just started happening in the last couple of weeks.

DRIVER_POWER_STATE_FAILURE
caused by driver: ntoskrnl.exe

I've attached the SFDiagnostic here - thanks.

RELEVANCY SCORE 200
Preferred Solution: BSOD - ntoskrnl.exe "driver power state failure" at shutdown

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD - ntoskrnl.exe "driver power state failure" at shutdown

Hi thedriver.

The BSODs are caused by REALTEK 2832U USB Driver (c:\windows\system32\drivers\rtl2832uusb.sys)





Quote:
Windows Error Reporting: Fault bucket X64_0x9F_3_POWER_DOWN_IMAGE_RTL2832UUSB.sys, type 0
Event Name: BlueScreen
Response: Not available
..........;Analysis symbol: X64_0x9F_3_POWER_DOWN_IMAGE_RTL2832UUSB.sys
............



Code:
BugCheck 9F, {3, fffffa8008604060, fffff80001f4a518, fffffa800ae4e710}

*** WARNING: Unable to verify timestamp for RTL2832UUSB.sys
*** ERROR: Module load completed but symbols could not be loaded for RTL2832UUSB.sys
Probably caused by : RTL2832UUSB.sys

Followup: MachineOwner
---------
And the driver is old enough.

Code:
fffff880`07778000 fffff880`07785000 RTL2832UUSB T (no symbols)
Loaded symbol image file: RTL2832UUSB.sys
Image path: RTL2832UUSB.sys
Image name: RTL2832UUSB.sys
Timestamp: Wed May 04 14:05:12 2011 (4DC10FC0)
CheckSum: 0000ACF2
ImageSize: 0000D000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Some information about what this driver does: Realtek
Unfortunately I am unable to search an appropriate update for you. I hope you know the sources to get it, as you are using it.

If you can, update the driver. Otherwise, dont use it.

Read other 3 answers
RELEVANCY SCORE 158

Hi Folks,

I really hope you can help me, I followed the instructions to create the attachement.

What I know so far is that this machine has BSOD'd several times...The last 2 times a ultilty called BlueScreenViewer.exe says it's due to "Driver power state failure" caused by: ntoskrnl.exe

I checked event viewer for the time mentioned 6/17/2012 11:29:02 pm and it says there is system error "source:Bug Check" at that exact time

For anti-virus I have MS Security Essentials. For Spyware, I have Spybot S&D.
I use with Workstation 7 as a study too so it has hosed my VMs which is very disappointing. I would really like to root cause this to continue with confidence...

I know you hear this all the time...but... please help! I don't mind collecting info and checking into things, I am just out of my element a little here.

I looked throug the results of the permon report and it seems clean for the most part.

Thanks in advance,

Jay

A:BSOD "Driver power state failure" caused by: ntoskrnl.exe

Is there anything else I can do to help action this post? Thanks

Read other 9 answers
RELEVANCY SCORE 154.8

I recently upgraded my motherboard, processor and memory, then installed a fresh copy of Windows 7 x64 Pro. I've been having problems from day 1. Originally, the computer would hang at either "logging off" or "shutting down" whenever I'd try to restart the machine (which is frequently when you're having to install drivers and programs). Now, it will still hang, but will then BSOD on me.

I've also come home once or twice and found that it'd BSOD'd while I was away. I think I've updated all the drivers, but like I said - I've been having issues from the start, and I'm not sure everything finished installing cleanly.

BSOD error has consistently been "Driver Power State Failure".

Any help would be greatly appreciated. Dumps attached.

Thanks!

A:BSOD with "Driver Power State Failure" -new build - hangs on shutdown

I'd still love to know what was messing my system up, but I ended up doing a complete reinstall anyway.

My Windows 7 key is an upgrade key, and Microsoft makes finding install media unnecessarily difficult. The image I used the first time was a bit... sketchy. I'm hoping that this time around I won't have the same issues, but I guess only time will tell.

Read other 1 answers
RELEVANCY SCORE 142.4

I have been getting the BSOD since a few weeks and found out by trial and error that a USB-hub is causing the problem. Whenever I disconnect the hub before I shut off the computer I do not get the blue screen.
Yesterday I also got a BSOD that mentioned driver power state failure. After I had de-installed Ubuntu 10.04 (I wanted to see what people are talking about but did not really like it) that problem did not show up again, although I do not know if that is just coincidence.

I have enclosed the dump files as per your instructions and hope that somebody will be able to help me.
Thank you.

A:BSOD with "usbhub.sys" and "driver power state failure"

Welcome!

It does look as if your USB drivers are causing the issue.
BSOD BUGCHECK SUMMARY
Code:

Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Wed Apr 28 03:41:32.255 2010 (GMT-4)
System Uptime: 0 days 0:31:47.502
BugCheck 1000007E, {c0000005, 9482319c, ad39bb40, ad39b720}
*** WARNING: Unable to verify timestamp for libusb0.sys
*** ERROR: Module load completed but symbols could not be loaded for libusb0.sys
Probably caused by : libusb0.sys ( libusb0+428c )
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Mon May 10 03:46:15.009 2010 (GMT-4)
System Uptime: 0 days 0:00:15.272
BugCheck 124, {0, 8752f544, 0, 0}
Probably caused by : hardware
BUGCHECK_STR: 0x124_GenuineIntel
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Mon May 10 05:22:31.146 2010 (GMT-4)
System Uptime: 0 days 0:02:23.393
BugCheck 1000007E, {c0000005, 9444b19c, adb53b40, adb53720}
*** WARNING: Unable to verify timestamp for libusb0.sys
*** ERROR: Module load completed but symbols could not be loaded for libusb0.sys
Probably caused by : libusb0.sys ( libusb0+428c )
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16... Read more

Read other 5 answers
RELEVANCY SCORE 135.6

Hello,

I left my computer on and open this morning before I left for class. When I returned, I had a BSOD, which specified "Driver Power State Failure" (I did not copy down any numbers, as I probably should have). I did a forced shut down (held the power button) and then restarted it, where it fortunately works for now.

My laptop is an Dell XPS-15, about two years old. I have not had any problems with it until now, and the past week or so it has been freezing up. I downloaded the SF Diagnostic Tool, and the zipped folder is attached.

I am uncertain what action to take next. Could someone advise me in how to fix the issue?

Thank you!!

A:BSOD after sleep or hibernation - "Driver Power State Failure"

upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.

Read other 3 answers
RELEVANCY SCORE 135.6

I have been using my asus laptop but recently started blue screening. When trying to shut it down the screen will go black, but the system lights remain on and it remains running, however irresponsive. It also began showing a blue screen with the warning "Driver power state failure".

Even after a factory reset this problem remains. Any help to figure out the problem would be greatly appreciated.

A:BSOD "driver power state failure", when shut down or sleep

Hi Chalcogen & Welcome to the forums ^_^,

I have analyzed your only dump file and a summary of that is given below :-

Code:
**************************Mon Jul 21 15:05:53.798 2014 (UTC + 5:30)**************************
*** WARNING: Unable to verify timestamp for win32k.sys

*** ERROR: Module load completed but symbols could not be loaded for win32k.sys

Probably caused by : memory_corruption

BugCheck 9F, {4, 12c, fffffa800aeacb00, fffff88001e9e800}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: CODE_CORRUPTION

FAILURE_BUCKET_ID: MEMORY_CORRUPTION_LARGE

MaxSpeed: 1900

CurrentSpeed: 2395


Processor may be overclocked!
Expected Frequency: 1900
Actual Frequency: 2395
Overclock Ratio: 1.26053

BIOS Version S550CM.202

BIOS Release Date 11/23/2012

Manufacturer ASUSTeK COMPUTER INC.

Product Name S550CM

??????????????????????????????????????????????????????????????????????????????????????``


Now, since the dump file blames the "Win32k.sys" which is a Windows Component, chance of it being at fault it extremely low. Below is a list of 3rd party drivers found over your system :-

Code:
**************************Mon Jul 21 15:05:53.798 2014 (UTC + 5:30)**************************
ASMMAP64.sys Thu Jul 2 14:43:26 2009 (4A4C7A36)
atkwmiacpi64.sys Wed Sep 7 07:14:52 2011 (4E66CC94)
AiCharg... Read more

Read other 3 answers
RELEVANCY SCORE 135.6

My Alienware M17x suffers daily, random BSODs, I think most are Driver Power State Failures. These persist when I re-install my NVIDIA drivers (I even tried using Driver Fusion to get a clean install), but they do seem more frequent with the recent beta drivers. Maybe it's my Intel display drivers...? BSODs occur when starting programs, ending programs, in programs, and when I have everything closed. Random.

I'm open to the idea that it could be physical damage (if that's possible). My laptop shipped with a busted DVD drive, so if that's a physical issue, there could be others.

Changing my anti-virus from Avast to MSE was advised on another forum but made no difference.

A possibly-completely-unrelated symptom: my laptop won't boot (freezes on splash screen) when I have a USB device plugged in (like my mouse). Changing my boot order doesn't seem to fix this.

Thanks for your time and help! My warranty expires in two weeks but I'm in Africa so Dell won't send home support :P

A:Frequent BSOD "Driver Power State Failure," No pattern that I see

Hello oldbenkenobi

Your last two dumps tells us just the same thing.
It is your mvidia display driver that is not installed correctly. And ACPI unable to load it correctly.

Code:
0: kd> !irp fffffa80076e96b0 1
Irp is active with 4 stacks 2 is current (= 0xfffffa80076e97c8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
Flags = 00000000
ThreadListEntry.Flink = fffffa80076e96d0
ThreadListEntry.Blink = fffffa80076e96d0
IoStatus.Status = 00000000
IoStatus.Information = 00000000
RequestorMode = 00000000
Cancel = 00
CancelIrql = 0
ApcEnvironment = 00
UserIosb = 00000000
UserEvent = 00000000
Overlay.AsynchronousParameters.UserApcRoutine = 00000000
Overlay.AsynchronousParameters.UserApcContext = 00000000
Overlay.AllocationSize = 00000000 - 00000000
CancelRoutine = 00000000
UserBuffer = 00000000
&Tail.Overlay.DeviceQueueEntry = fffffa80076e9728
Tail.Overlay.Thread = 00000000
Tail.Overlay.AuxiliaryBuffer = 00000000
Tail.Overlay.ListEntry.Flink = fffff80003070b00
Tail.Overlay.ListEntry.Blink = fffff80003070b00
Tail.Overlay.CurrentStackLocation = fffffa80076e97c8
Tail.Overlay.OriginalFileObject = 00000000
Tail.Apc = 00000000
Tail.CompletionKey = 00000000
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8007f89c30 00000000 fffff8800f3c1ca8-fffffa800b30cca0 Success Error Cancel pending
\Driver\ACPIUnab... Read more

Read other 5 answers
RELEVANCY SCORE 135.6

Hi, i keep having this issue. Anyone knows how to solve?
My minidump is https://skydrive.live.com/#cid=392FCBBA17F5ACA1&id=392FCBBA17F5ACA1%21187

A:BSOD when going sleep mode "DRIVER POWER STATE FAILURE"

Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation.

I would re-install newest driver available.

Read other 1 answers
RELEVANCY SCORE 135.6

New windows 7 install on one of my home built workstations. I have an appearantly random BSOD. It sometimes runs for days, sometimes hours. I may have multiple issues (I have not been around to see it). Usually I start folding at home (stanford project) and leave it when I am not using the terminal for CAD, CAM or FEA. I just upgraded to windows 7 for this build so I would fall in the noob catogory for windows 7 user. (example:I just figured out how to unhide all the folders). I am also not the only user of this machine so who knows what has been done in the last couple weeks.

The hardware is all the same as it was running xp with the exception of the harddrive (new Intel 520 240gb ssd) on a fresh OS install from new hd. Also the motherboard got a bios update. From the name of the BSOD I would guess my drivers need updating but between windows update, intel updates and EVGA updates I haven't found any that haven't been updated. I updated my forum computer hardware list if you need that.

Any help fixing this would be great.
// edit, files didn't attach properly

A:BSOD random, "Driver Power State Failure"

Sorry for the second post // edit to add files.

Read other 2 answers
RELEVANCY SCORE 135.6

i Bought a new laptop DELL inspiron 3542 i7 model. I had problems with it like BSOD, slow perfomance and touchpad. I contacted dell and they replaced the Hard drive as well as the touchpad. But i was still getting BSOD whenevr i open the dell touchpad properties. So i uninstalled the driver. Also when i launch Crysis 3 the game freezes at the game launch itself and the touchpad stops working but mouse works and then BSOD. I uninstalled the nvidia geforce 840 m driver completely and installed the beta version but still i am facing the problem!! And the most important thing is that this happens only while i use my laptop on its battery. When i plug in the charger it never happens..i never see bsod while charging. Today i tried something..i was using my laptop with the AC adapter plugged in (charging) and then i suddenly unplugged it and my touchpad froze (while external mouse still working) and i got the error (BSOD) " DRIVER POWER STATE FAILURE". Games like sniper 3, cod: ghosts works fine..but when i launch crysis 3 or GTA 4, i get the error..But when plugged in, all the games works smoothly. Please help me, i have bought this laptop just 21 days before!!
One more thing: Last time when i reformatted my hard drive(old one) this problem was solved..but with is new hard drive i have formatted it 3 times and installing windows but it didnt help me

A:BSOD!! "Driver Power State Failure" while not charging!!:(

Minidump file is missing. Please upload it.

Read other 13 answers
RELEVANCY SCORE 135.6

Hi all!

I have a new laptop(HP 250 G3 Notebook) with Windows 8 initially installed on it.
I formatted it and installed Windows 7 Pro 32bit.
Few hours later,the 1st BSOD occurred when I was trying to hibernate the system.
Kindly note that it has some drivers missing(as in the print screen attached) and I'm still struggling to find it.
Please, help me out with this.

Thank you!

A:BSOD with "Driver Power State Failure" message

Please read BSOD Posting Instructions

Read other 5 answers
RELEVANCY SCORE 135.6

Every so often my Acer Aspire 5315 laptop goes into BSOD and states Driver Power State Failure. It wasn't on for long enough so couldn't write down the rest of the numbers ETC..
I have an Acer Aspire 5315 Laptop
Windows Vista Basic SP1
New hardware includes a 7 port USB Hub made by Advent and also a 1TB Buffalo Drivestation External Hard drive

I have ran various scans for viruses malware ETC. including Norton 360 and Spybot Search and Destroy
 

A:Solved: BSOD "Driver Power State Failure" Help :)

Read other 11 answers
RELEVANCY SCORE 135.6

Every couple of days, I get a BSOD "Driver power State Failure".

Drivers are up-to-date, no overclocking.

Please see attached zip file with debug info (which is pretty much abracadabra to me).

Thanks for your help!

A:BSOD "Driver power State Failure" every few days

Trinnion, I'll see if I can help you. I have looked at your last 6 dump files. 5 of the 6 blamed

Code:
usbaapl64
start end module name
fffff880`07e36000 fffff880`07e48000 usbaapl64 T (no symbols)
Loaded symbol image file: usbaapl64.sys
Image path: \SystemRoot\System32\Drivers\usbaapl64.sys
Image name: usbaapl64.sys
Timestamp: Tue Nov 27 17:38:02 2012 (50B54EDA)
CheckSum: 0001669F
ImageSize: 00012000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Which is your Apple iPod/iPhone Mobile USB device driver

Also blamed in 1 each was

Code:
EpfwLWF
start end module name
fffff880`043eb000 fffff880`043f9000 EpfwLWF T (no symbols)
Loaded symbol image file: EpfwLWF.sys
Image path: \SystemRoot\system32\DRIVERS\EpfwLWF.sys
Image name: EpfwLWF.sys
Timestamp: Thu Aug 15 09:55:11 2013 (520CEBCF)
CheckSum: 0000AF76
ImageSize: 0000E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Which is ESET ESS/NOD32 driver
and


Code:
atikmpag
start end module name
fffff880`03e7d000 fffff880`03f11000 atikmpag T (no symbols)
Loaded symbol image file: atikmpag.sys
Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
Image name: atikmpag.sys
Timestamp: Thu Mar 28 20:09:45 2013 (5154E9D9)
CheckSum: 00091A60
... Read more

Read other 9 answers
RELEVANCY SCORE 135.2

I recently received a blue screen error stating "driver state power failure" 0x09f. ntoskrnl.exe error
This is the first time i've seen this screen although my memory dump files seem to tell another story.

Computer was a barebone comp from tigerdirect
Win 7 x64
8gb ram

not sure what else you need. Here is the link to the minidump files....


Thanks for any help I can get.

*edit* sorry for the single file zip. There should be two i will try n upload the second
 

A:BSOD error 0x09f "driver state power failure" Win7

second dump file..had to zip in order to not exceed size limit
 

Read other 7 answers
RELEVANCY SCORE 134.8

Hello, my bsod was solved after updating the nvdia few months ago but then it started again, there wasn't any blue screen when i use AutoDesk maya 2 months ago but now it keep having blue screen when i use maya for like 1 - 2 minutes. Thanks for the help.

DESKTOP-2HINSK4-Sun_11_09_2016_160240_97.zip

Read other answers
RELEVANCY SCORE 134.8

Computer freezes and crashes irregularly when watching youtube videos in google chrome. was just a minor inconvenience, but I have recently installed adobe creative suite and if I have a video playing it will always crash into a BSOD after about 5 minutes of non-interactive freeze. Some sources I have found have hinted that it may be my Nvidia card drivers, but I have been unable to fix it.
DESKTOP-2F2KHAS-Mon_09_05_2016_124021_03.zip

Read other answers
RELEVANCY SCORE 134.8

Hi,

Been getting this BSOD for a while at least once a day. Can't identify any pattern. It's been worse since I formatted a few months ago. I assume it's just a matter of updating an old driver but I've been unable to identify which one.

Running Windows 7 Home Premium x64. Please see attached dump file.

Thanks in advance for your help!

A:BSOD "Driver power state failure"

Code:
Name [00000014] Realtek RTL8188CE Wireless LAN 802.11n COMBO PCI-E NIC
Driver c:\windows\system32\drivers\rtl8192ce.sys (1005.11.1203.2010, 1.05 MB (1,105,000 bytes), 13/10/2012 2:10 AM)
The driver's date is :

Code:
lmvm rtl8192ce
start end module name
fffff880`04e4e000 fffff880`04fb9000 rtl8192Ce (deferred)
Image path: \SystemRoot\system32\DRIVERS\rtl8192Ce.sys
Image name: rtl8192Ce.sys
Timestamp: Fri Dec 03 16:26:21 2010 (4CF8CCD5)
CheckSum: 00118EED
ImageSize: 0016B000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Realtek


Code:
fffff880`03785908 fffff880`010a0307Unable to load image \SystemRoot\system32\DRIVERS\iaStor.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iaStor.sys
*** ERROR: Module load completed but symbols could not be loaded for iaStor.sys
iaStor+0x70307
Get rid of intel rapid storage.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "Disc Drives" by clicking on the triangle in front of it.
Select one item under it, right click, uninstall.
Continue the process for all items under "Disc Drives"
Now restart the computer. At restart, windows will auto configure the appropria... Read more

Read other 5 answers
RELEVANCY SCORE 134.8

Last night, when sending my computer to stand by I received the BSOD which included a message saying "power driver state failure" or something along those lines.

I recently reset my computer to the factory settings (via recovery disc), so the problem could be any of the dozens of applications I've installed since. This is the second time I received the BSOD since resetting my computer.

I suspect the problem might be related to my optical drive. Basically, what happens is that sometimes the drive will just stop working. It still shows up in "My Computer", but labeled as "CD Drive" rather than "DVD-RAM Drive" as it normally does, and it won't recognize any disk that is inserted. A reboot of the system usually "fixes" the problem, but not always. I also had this problem before resetting my computer.

I'm including the minidump files here. I tried looking at them myself--I installed and ran the Windows Debugger, which came back with a message "Probably caused by : ntoskrnl.exe ( nt+5c846 )" But the debugger also gave a number of warnings about my "symbols" not loading properly.

I don't need to contact a semiotician, do I?

K
 

A:BSOD with "power driver state failure"

Read other 11 answers
RELEVANCY SCORE 126

I'm using a ASUS S56CA ultrabook which runs VERY SLOWLY (takes 5+ minutes to boot up)!
OS is Windows 8.1 with ALL the latest Windows Updates installed.

I get the BSOD error "Driver_Power_State_Failure" usually when trying to enter sleep mode or using the Instant ON feature from ASUS .. neither of them work properly so after researching online I've decided to REMOVE the Intel? Rapid Storage Technology (Intel? RST) RAID Driver .. reboot and it's still VERY slow to boot. I've also tried to d/l new drivers from the ASUS website (only BIOS and few others) which were also installed but still get same results. The Intel HD 4000 Graphics is also out of date but I cannot d/l the update from the intel website .. shows file not available?

It also does NOT shut down completely .. select Shut Down from the menu and screen goes BLACK but power never goes off .. so I must manually hold the power button 5 seconds to shut down.

Finally, I've turned OFF ALL power saving features in Power Options .. no sleep .. no turn HDD off, etc.

I need to know how to fix this system so it does NOT take 5 minutes to boot up please.

I'm also attaching the last 4 minidump files for review .. plus I'll use the SF utility tonight to get the other suggested files on this forum.

A:Driver Power State Failure" error BSOD using Windows 8.1

Attached SF zip file as requested in your post notes. Hope someone can fix this soon .. system takes 5 minutes to boot up and still get BSOD even after updating Intel RST drivers and disabling power options.

Thanks,
Shane

Read other 2 answers
RELEVANCY SCORE 123.2

Hello,
I recently encountered a sudden blue screened error message with the following error that was suggested to research: "Power_Driver_State_Failure". I have only seen the error once thus far, but I fear that I may see it again at some point. It forced a restart, and the rebooting process was rather slow.
My operating system is Windows 8.1, and I have a Lenovo Y510p ideapad (nearly 9 months old).
Is this a significant error? Is there any way to prevent it from returning again?
Any assistance would be greatly appreciated!
Thank you,
~Trav.~
 

A:Blue screen error:" Power Driver State Failure"

Read other 16 answers
RELEVANCY SCORE 123.2

It seems to happen with more demanding games. Desktop, internet browsing and less demanding games it works very well, but during games such as Portal 2 or Skyrim it freezes my entire computer. When I try to ALT+TAB out it either goes to a blank screen or it just doesn't do anything at all. I usually have to force restart my computer in order to get it working properly again. Anyone have any ideas on what I should do next?

Note: I already ran the BSOD tool and attached the zip. XAVIERFRANCIS3-Thu_07_02_2015_161309_53.zip

Note 2: My PC's name is cooler than yours

A:Freezing while gaming. "Driver Power State Failure"

try this : Wagnard Tools then download DISPLAY DRIVER UNINSTALLER.
it ask you to reboot in safe mode when u launch the software, so reboot
then clean and uninstall your graphics card driver ,then install the latest one which can be found in the manufacturer website like nvidia,intel, or amd. or try this vid: https://www.youtube.com/watch?v=NiAbYY9U998

Read other 1 answers
RELEVANCY SCORE 122.8

Hey guys, as thread title states, I sometimes get "Driver Power State Failure" after logging into Windows 8 (not 8.1).

I believe it is my Sierra Wireless 760S Aircard 4G modem causing the issue but I'm not entirely sure, and sometimes it doesn't detect it until I unplug and reconnect the usb cable after booting.

Any help greatly appreciated.

Cheers

A:Sometimes get "Driver Power State Failure" after login

In the "Device Manager", find that device, look under "Properties / Power management " and uncheck " Allow this computer to turn off
this device to save power"

Read other 2 answers
RELEVANCY SCORE 122.8

BSOD occurs a while after waking up from sleep. Event manager shows the error "The driver for device \Device\Scsi\Ultra1 detected a port timeout due to prolonged inactivity. All associated busses were reset in an effort to clear the condition" had occurred before the blue screen. I have a Promise Ultra133 IDE controller; perhaps that's not cooperating with the sleep function?

Thanks in advance.

A:"Driver Power State Failure" Bugcheck

  
Quote: Originally Posted by FrostyFlakes


BSOD occurs a while after waking up from sleep. Event manager shows the error "The driver for device \Device\Scsi\Ultra1 detected a port timeout due to prolonged inactivity. All associated busses were reset in an effort to clear the condition" had occurred before the blue screen. I have a Promise Ultra133 IDE controller; perhaps that's not cooperating with the sleep function?

Thanks in advance.



this crash was caused by disk.sys. It can mean either the win 7 file (disk.sys) is corrupt or there is a problem with the controller.

I would run a system file check to verify the system files
to do that type cmd in search>right click and run as admin>>dfc /scannow (note the space between sfc and "/")

Let us know the results as you may have to re-run it.

Ken


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\032810-24133-01 - Copy.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`0402e500?
Symbol search path is: SRV*F:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
K... Read more

Read other 5 answers
RELEVANCY SCORE 121.6

Hello guys,
I tried resolving this issue by myself, but I can't figure it out. I'm getting BSOD on my new laptop. The laptop is brand new, I bought it about one month ago. It came with the default linux OS installed by the manufacturer, but I did a format and I installed Windows 7 Ultimate x64.
Machine specs:
Acer Aspire V3-771G 736b4G75Maii
CPU: Intel Core i7-3630QM 2.4GHz with Turbo Boost up to 3.4GHz
GPU: nVidia GeForce GT 640M 2GB DDR3 memory
RAM: 1x 4GB DDR3
HDD: 750 GB Toshiba

I got BSOD 3 times, every time I was browsing the internet using Mozilla Firefox. First couple of times I was on facebook checking some pictures and the 3rd time I was on forums looking for a solution to this problem. The BSOD happened when the laptop was on high performance settings, but i can't remember if it was plugged in or not.

As i said, the laptop is 1 month old, but it came with a broken speaker so it was sent to the service where they replaced the entire front cover. They said the reason is that the speakers are glued to the front cover so it was not possible to replace only the speakers. Before sending the laptop to the Acer service I did not experienced any BSOD and I used it for like 2-3 weeks, I even did some gaming on it.
The first BSOD occurred last week and the laptop wasn't used until yesterday when it happened again and the last BSOD happened just earlier today.

I will attach the prefmon.html and the folder with the files I got from the BSOD_Windows7_Vista_v2.64_jcgriff2_.ex... Read more

A:BSOD ntoskrnl.exe driver power state failure

I forgot to mention, from the last BSOD in event viewer i have the following events:
Event 6008
The previous system shutdown at 3:44:38 PM on ‎8/‎19/‎2013 was unexpected.

Event 1001
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa8005294a10, 0xfffff80000b9c3d8, 0xfffffa8004b9a570). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 081913-17596-01.

Event 41
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Event 1101
Audit events have been dropped by the transport. 0

Event 10002
WLAN Extensibility Module has stopped.

Module Path: C:\Windows\system32\athihvs.dll
Event 4001
WLAN AutoConfig service has successfully stopped.
Event 37
The speed of processor 0 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 41 seconds since the last report.

this last event shows up 8 times, one for each core. The CPU has 4 physical cores, but with hyperthreading it has a total of 8.

I did a Driver Verifier according to the instructions posted here (http://www.techsupportforum.com/foru...ed-473665.html) and there was no BSOD.

Read other 16 answers
RELEVANCY SCORE 121.6

Hello, my computer has crash 4 times within the past two hours. I believe it has something to do with the Elgato Game Capture HD software I installed on the computer, since it seemed to only happen when I was either using it, or trying to uninstall it. Currently, I've uninstalled it, and no BSOD so far. I have updated my drivers and performed any windows updates available. Please help.

Thanks in advance.

Read other answers
RELEVANCY SCORE 121.6

I'm getting (seemingly) random BSOD's, and according to bluescreenview it's caused by ntoskrnl.exe. Not really sure how to fix this, and what it means.

It's a relatively fresh install of windows, built PC

AMD phenom II X4
ECS a750GM-M V7.0 motherboard
G Skill memory (4 GB)
Windows 7 Pro x64
if any of that is relevant.
All windows updates are installed
All drivers are up to date

It says I'm not permitted to upload the .dmp files, so I'll post them on Mediafire, unless there's a way I can view them myself and post them.

Mediafire link to all four dump files: http://www.mediafire.com/?psykx435dqvuabq,8m3hdbhxsquktsg,mth615eme064b6k,m6n5nd3144355os

A:BSOD, driver power state failure, ntoskrnl.exe

Hi -This is a way to see the BSOD records and post them here -Download BlueScreenView:http://www.nirsoft.net/utils/blue_screen_view.htmlunzip downloaded file and double click on BlueScreenView.exe to run the program.when scanning is done, go to EDIT - Select AllGo to FILE - SAVE Selected Items, and save the report as BSOD.txtOpen BSOD.txt in Notepad, copy all of the content, and paste it into your next replyThank You -

Read other 13 answers
RELEVANCY SCORE 121.6

Hey, my desktop computer keeps freezing here and there. I have a bad feeling it happens when working with my data HDD (not a system one). Some applications freeze and some not, I can restart, but it gets stuck when "Turning off" .. after few mins I get BSOD.

I've tried to boot up with driver Verifier and it freezes right after login screen .. no BSOD (within 30 mins).

The only thing I know from minidump is that it causes ntoskrnl.exe

Would someone help me to identify my problem?

Thanks in advance.

A:BSOD Driver Power State Failure ntoskrnl.exe

Welcome aboard.

Code:
fffff880`0355b488 fffff880`010bb041Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
sptd+0x3f041
sptd.sys is the most well known causes of a crash in windows 7. There are some technical reason behind it is that much crash prone. It is a paer of Daemon tools, so better you uninstall Daemon Tools.

Also free up the startup.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept the restart.
Let us know the results.

Read other 8 answers
RELEVANCY SCORE 121.6

Hello. I seem to be having the same problem as the original post...multiple BSOD per day with "Driver Power State Failure" listed as the reason. I do not want to assume the solution is the same as above until you take a look and advise. Thank you.

A:"Driver Power State Failure"

  
Quote: Originally Posted by biglos44


Hello. I seem to be having the same problem as the original post...multiple BSOD per day with "Driver Power State Failure" listed as the reason. I do not want to assume the solution is the same as above until you take a look and advise. Thank you.


Welcome to SevenForums biglos44.

They look similar honestly.

McAfee is a frequent cause of BSOD-s, consider uninstalling it with the McAfee Removal Tool and replace with Microsoft Security Essentials (To test)

Code:
fffff880`037df000 fffff880`037fb000 mfeapfk.sys
fffff880`037b2000 fffff880`037df000 mfeavfk01.sy
Description here:

Code:
mfeavfk01.sy ==== McAfee Firewall Total Protection 2010 http://www.carrona.org/drivers/search.php?id=mfeavfk01.sy

mfeapfk.sys ==== McAfee http://www.carrona.org/drivers/search.php?id=mfeapfk.sys
How to uninstall or reinstall supported McAfee products using the Consumer Products Removal tool (MCPR)McAfee Removal Tool - McAfee Uninstaller


Code:
Start Menu\Programs\McAfee Public:Start Menu\Programs\McAfee Public
Start Menu\Programs\McAfee Security Scan Plus Public:Start Menu\Programs\McAfee Security Scan Plus Public
Start Menu\Programs\Spybot - Search & Destroy Public:Start Menu\Programs\Spybot - Search & Destroy Public
Spybot is not the best security software. It slows down the system.Removing Spybot - Safer-Networking Forums
Microsoft Security Essentials. Recommend... Read more

Read other 1 answers
RELEVANCY SCORE 121.6

I recently upgraded my system to windows 8 and I keep having error messages saying: "driver state power failure" and something to do with minidump files. Can anyone please help? I have attached my files:

mind you, I dont know very much about computers so go gentle please

A:"driver state power failure"

MSINFO32 shows some STOP 0xA0 errors and some errors related to L1C63x64.sys (your networking drivers).

The first errors are suggestive of a possible hardware problem (most likely the hard drive). Please try these free diagnostics: Initial Hardware Diagnostics Please understand that this can also be a low-level driver problem, so post back if the tests don't find anything wrong.

The ATK64AMD.sys driver dates from 2006. It is the ATK0101 Hot Key driver (this is one of those low-level drivers that I mentioned earlier). Please uninstall the current version from your system and then install the latest, Win8 version from the system/mobo manufacturer's website.

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

ATK64AMD.sys Fri Oct 27 08:45:25 2006 (4541FF65)
ATK Hotkey ATK0101 ACPI UTILITY Driver
http://www.carrona.org/drivers/driver.php?id=ATK64AMD.sys

HECIx64.sys Thu Sep 17 15:54:16 2009 (4AB293E8)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys

NETwNs64.sys Thu Oct 6 10:45:03 2011 (4E8DBEEF)
Intel(R) Wireless WiFi Link 5000 Series Adapter Driver for Windows 7
http://www.carrona.org/drivers/driver.php?id=NETwNs64.sys

Analysis:
The following is fo... Read more

Read other 1 answers
RELEVANCY SCORE 120.4

Hello,

I've had 3 BSOD in the last few days, usually when my computer is asleep or when I am not actively using it. Malwarebytes anti-malware software indicates no issues, as does esot nod antivirus5.

Ran a free program (BlueScreenView v1.47 by nirsoft) which indicated a driver power state failure and/or a ntoskrnl.exe problem.

I do not know how to proceed, and would love some advice!

A:BSOD - driver power state failure or ntoskrnl.exe problem?

All of your crashes are caused by your Texas instruments USB 3.0 driver:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa80140bfcd0, fffff80000b9c3d8, fffffa8011a2aac0}

*** WARNING: Unable to verify timestamp for tihub3.sys
*** ERROR: Module load completed but symbols could not be loaded for tihub3.sys
Probably caused by : tihub3.sys

Followup: MachineOwner
---------
Driver Reference Table - tihub3.sys
Looking at the driver we can see it is rather old:

Code:
kd> lmvm tihub3
start end module name
fffff880`053d7000 fffff880`053fb000 tihub3 T (no symbols)
Loaded symbol image file: tihub3.sys
Image path: \SystemRoot\system32\DRIVERS\tihub3.sys
Image name: tihub3.sys
Timestamp: Wed Nov 23 00:50:16 2011 (4ECC8998)
CheckSum: 00021577
ImageSize: 00024000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update your driver from here: Analog, Embedded Processing, Semiconductor Company, Texas Instruments - TI.com

Read other 5 answers
RELEVANCY SCORE 120.4

Been having the occasional blue screen every few hours for the past week or two now, I've been trying to pinpoint exactly which drivers are causing the issue or if it's something more serious. It's a custom built machine and around 18 months old now, so it's not completely unlikely that some of my parts are starting to wear out. (Not overclocking)

Also, I had a hal.dll error associated with the Driver Power State Failure as well, it just didn't fit in the title.

If anyone can give me a hand with this it'd be much appreciated. I've attached the SF files as requested.

A:BSOD Driver Power State Failure ntoskrnl.exe, ntkrnlmp.exe

I"m sorry that I missed this post.
Please reply back if you still need help. I'll reply after work today (after 3pm Eastern time in the US).

Read other 1 answers
RELEVANCY SCORE 120.4

Hello,

This morning when i woke up when i switched my pc's monitor i got those beloved letters.My computer was on idle,probably it fell asleep.The settings on power options were on Balanced mode.Pc is on stock clocks.No overclock made.
Heres the minidump file.
Notice: this happened a couple of days once i updated lots of windows updates.

A:BSOD - Driver power state failure - ntoskrnl.exe+75bc0

Welcome to the Forum.

AVG is contributing to your BSOD. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

Reduce items at start-up: Startup Programs - Change

Perform a clean boot: Troubleshoot Application Conflicts by Performing a Clean Startup

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

Rt64win7.sys Thu Feb 26 15:04:13 2009 (49A65B0D)
Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC
Driver Reference Table - Rt64win7.sys

Perform a clean install of a driver following: How to Clean Left Over Driver Files with Driver Sweeper

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Scan with Kaspersky TDSSKiller:Anti-rootkit utility TDSSKiller

ESET online scanner: Free Online Virus Scanner | ESET

Run a System file check (SFC): SFC /SCANNOW Com... Read more

Read other 1 answers
RELEVANCY SCORE 120.4

Hi!

I recently got a laptop from Scan.co.uk, it's a custom build using the Clevo kit.
I have been having intermittent BSOD's with a Driver Power State Failure message at random times, I can't see a discernible pattern.

It can happen whether on the desktop, chrome or gaming but generally on the desktop during minimal use.
I can play games for around 8 hours without issue but sometimes I'll get the error straight after booting up or whilst shutting down or just doing work in chrome.

I've seen people with similar issues in this forum and have tried to make sure all my drivers are up to date but I'm missing something somewhere

Any help offered would be greatly appreciated

Steps I've taken so far;

Avast Virus scan - No threatsEset online scan - No threatsAll windows Updates AppliedDism run
"Dism /Online /Cleanup-Image /ScanHealth" - The component store is repairable. The operation completed successfully."Dism /Online /Cleanup-Image /CheckHealth" - The component store is repairable. The operation completed successfully."Dism /Online /Cleanup-Image /RestoreHealth" - The restore operation completed successfully. The component store corruption was repaired. The operation completed successfully.

A:BSOD Driver Power State Failure ntoskrnl.exe+153ca0

Hi ApocalypseMeow & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
0: kd> !irp ffffe0011851f010
Irp is active with 6 stacks 4 is current (= 0xffffe0011851f1b8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 ffffe001143e9880 00000000 fffff801f3aa2fc4-ffffd0002a3468f0 Success Error Cancel pending
\Driver\pci dxgkrnl!DpiFdoPowerCompletionRoutine
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 ffffe00117f61040 00000000 fffff800b4395fd8-ffffe0011a826f08 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
\Driver\nvlddmkm nt!PopRequestCompletion
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-ffffe0011a826f08
Args: 00000000 00000000 00000000 00000000


As we can see that the "nvlddmkm.sys" which is the... Read more

Read other 7 answers
RELEVANCY SCORE 120.4

Hello,

I've been having bsod's for a while ever since I disabled the Automatic Restart. I'm going to say that I figure it might have something to do with my Toshiba external hdd but I hope I can get a fix for this. I've spent days researching online - I've tried to find if I had any drivers to update by going to my Device Manager but all "update driver" results I get are the same: they are up to date.

My zipped minidump files: http://sdrv.ms/YPs4lS
Win7 Home Premium x64
Dell Inspiron 580S
Intel Pentium G6950 2.80GHz
4GB of RAM
Service Pack 1

Most recent crash info:On Sun 2/24/2013 1:44:16 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\022313-16130-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x75C40)
Bugcheck code: 0x9F (0x3, 0xFFFFFA80059EB060, 0xFFFFF80000B9C518, 0xFFFFFA80074604B0)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
Any help is greatly appreciated!

A:BSOD: Driver Power State Failure ntoskrnl.exe 0x9F

Hi and welcome to the forums.

Seems like a core Kernel level issue.

Things to do:

Run System File Checker to verify/repair the integrity of system files.
Full tutorial here: SFC /SCANNOW Command - System File Checker

Uninstall COMODO Internet Security and replace it with Microsoft Security Essentials - Microsoft Windows
Update it and run a full scan.

Go to Start>Run
Type MSCONFIG and press Enter.
Click on Startup tab, now click on Disable All.
Click Apply and OK. Reboot the system.

In addition, run chkdsk /f to repair corrupt hard drive sectors.
Full tutorial here: Disk Check

If all of the above fails, as a test, I'd suggest you to Enable Driver Verifier to find out which driver/software is causing the BSOD. Once you enable it, expect some frequent BSODs. After 24 hrs, disable the Driver Verifier and re-upload the dump files for analysis.

Let us know if it works.

The below is for information purpose only:

BugCheck Analysis:


Code:
ADDITIONAL_DEBUG_TEXT:
You can run '.symfix; .reload' to try to fix the symbol path and load symbols.

MODULE_NAME: nt

FAULTING_MODULE: fffff80002e56000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 503f82be

DRVPOWERSTATE_SUBCODE: 3

DEVICE_OBJECT: fffffa8005bca060

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

BUGCHECK_STR: 0x9F

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80002f3f6d2 to fffff80002ed4fc0

STACK_TEXT:
fffff800`00b9c4c8 fffff800... Read more

Read other 5 answers
RELEVANCY SCORE 120.4

I've been experiencing this BSOD on and off for a while now, and after doing some research came across a forum post suggesting to do a memtest. I've only had time to run it for 3 passes and will try for the full 8 later in the week when I have more time.

I thought I would start a thread to make sure there are no other underlying issues that could be the cause of the BSOD. Attached are the SF Files. Thanks!

A:BSOD Driver Power State Failure 0x0000009f (ntoskrnl.exe)

Hi MSB117.

The dedicated GPU is totally out!!! Does a restart brings it back?

Yes, a stop 0x9F can do it, based on sleep/hibernation settings and it is often seen for Optimus Technology/Switchable graphics. It is not the first instance.

As the GPU is causing continuous issue over a time, I would suggest you to contract Dell/Alienware servicing center.

Read other 7 answers
RELEVANCY SCORE 119.2

Hi

XPS L502x : 2nd generation Intel Core i7-2720QM processor 2.20 GHz with Turbo Boost
2.0 up to 3.30 GH
8Gb Ram
Windows 7 64 bit

Have been having repeated BSODs lately. Used to get them about once or twice a week but its now a few times a day that it happens.

Have attached the zip file made by the download from this site and will paste the WhoCrashed Report below.

I have tried numerous fixes and nothing has worked...getting desperate.

Thanks in advance guys


System Information (local)
--------------------------------------------------------------------------------

computer name: LAUCHLANMAC
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: GenuineIntel Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz Intel586, level: 6
8 logical processors, active mask: 255
RAM: 8499937280 total
VM: 2147352576, free: 1943908352



--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.


On Sun 3/4/2012 4:14:17 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\030412-14710-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800D8BC4F0, 0xFFFFF80000B9C3D8, 0xFFFFFA800BDDA010)
Error: DRIVER_POWER_STATE_FAILURE
file path: C... Read more

A:Random BSOD : ntoskrnl.exe (nt+0x7CC40) Driver Power State Failure

These were Related to Mbm3DevMt.sys F3607gw Mobile Broadband Device Management Driver from MCCI Corporation.

I would re-install the newest driver available.
The same is true for wwanussf.sys F3607gw Mobile Broadband Module from Ericsson AB

Why 2 Broadband drivers?

Read other 6 answers
RELEVANCY SCORE 119.2

Hello All,

I believe the problem is the result of ntoskrnl.exe because WhoCrashed crash dump analysis says...

This was probably caused by the following module: ntoskrnl.exe (nt+0x75BC0)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800A35EA10, 0xFFFFF80000B9C518, 0xFFFFFA8010D8CCA0)
Error: DRIVER_POWER_STATE_FAILURE

although occasionally it is....

This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x9F (0x3, 0xFFFFFA800A35EA10, 0xFFFFF80000B9C518, 0xFFFFFA8010D8CCA0)
Error: DRIVER_POWER_STATE_FAILURE


? Win 7 Pro
? x64
? The original OS installed on the system was Win 7 Home
? The OS is a full retail version that I installed
? 5 year old Board and chip
? I have re-installed the OS (always a clean install from a wiped drive) several times. Current install is a little over 1 year old.

? Intel Core i7 860 @ 2.8GHz
? NVidia GeForece GTX 650 Ti Boost
? Dell Studio XPS 8100 Motherboard w/ Intel H57 Chipset
? Diablotek Pro Series 550w Power Supply

? Dell
? Studio XPS 8100

Desktop

I have expanded and replaced a number parts on the system since originally purchased. I currently have 3 SATA Drives and the DVD drive attached to the motherboard as well as an external drive attached to the external eSata port. 12GB RAM. My OS resides on its own SSD and all files are stored on other drives. I am not overclocking. The only security I am running is MS security essentials.

Let me know if there is any additiona... Read more

A:BSOD Regularly WhoCrashed says ntoskrnl.exe Driver Power State Failure

Hi

Can you update the driver to your Broadcom NetLink (TM) Gigabit Ethernet from Broadcom?
Let us know the result.

Read other 3 answers
RELEVANCY SCORE 118.8

Hi,

The PC's been running fairly smoothly for close to a year now, and the last couple of days I've been getting my first few BSoDs. The computer usually shuts down normally, but now, it's been a little bit buggy when coming out of standby and and not shutting down properly. So, it happened most recently last night, after work, I woke it up again from standby, did a bit more homework and then went to shut it down, which it failed to do. It reset, loaded normally and after googling the issue, I shut it down with no problems then.

The most recent install was the mouse drivers, a Logitech Mx518, so I'm wondering if that causes issues with standby.

? OS - Vista Home Premium
? x64
? Vista x64 / XP x86 dual-boot
? OEM versions
? Age of system: 10 months
? Age of OS installation: 10 months
? CPU: Intel i7 920
? Video Card: Nvidia GTX260 Gold
? Mother Board: Gigabyte EX58 UD3R
? Power Supply - Seasonic PSR 650+ : 650 + W

I've attached the whole system report thing.

A:Driver Power State Failure BSoD on Shutdown

Hi,

It does look like it could be your mouse drivers:

Code:
The power transition timed out waiting to synchronize with the Pnp subsystem
Pnp = Plug and Play

Latest Mx518 drivers: http://www.logitech.com/en-hk/428/42...s&bit=&osid=13

Also you are still running Vista SP1, SP2 download links can be found here: http://www.techsupportforum.com/f104...ml#post2160787

Regards,
Reventon

Read other 5 answers
RELEVANCY SCORE 118.8

Hi

Laptop - HP HDX18
Vista home premium - 64-bit (SP2)
about 2 year old?

Basis of problem - laptop will not shutdown it waits on 'Windows is shutting down' for ages then bluescreens with a 'driver power state failure' message.

Further to this, maybe connected, my usb devices only work if they are plugged in at startup. If I unplug and re plug in a usb device, it will not work unless I reboot the system. Annoying, and maybe connected?

Thanks for any help

Chris

A:BSOD Driver Power State Failure at shutdown

Additional File (if required)

Read other 1 answers
RELEVANCY SCORE 118.8

Hi there!
I've got the following problem:

Every time when I have a network connection with my other pc and shared some files, I get a BSOD when shutting down the pc. The weird thing is: From time to time I get different drivers that made the problem. The first one is tdx.sys and the second one is e1y62x64.sys which is the driver from my Intel 82567V-2 Gigabit Network Connection.
I still try to find out when the first failure and when the second one comes. My current assumption: When my WLAN-Stick is plugged in, i get tdx.sys, when it isn't plugged in I get e1x62x64.sys.

OS is Win7 64bit

So far I did:

- Updated both drivers (Intel and for my USB WLAN-Stick)
- run sfc /scannow no problems
- Installed http://support.microsoft.com/kb/967891 this hotfix.

I hope you can help me.

thanks in advance,
Matrix


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8004750060, fffff80000b9c518, fffffa8007ad6e10}

*** WARNING: Unable to verify timestamp for e1y62x64.sys
*** ERROR: Module load completed but symbols could ... Read more

A:BSOD at shutdown/Driver Power State failure/tdx.sys

Hi -

Update your Intel Ethernet driver --> http://downloadcenter.intel.com/Default.aspx

Make sure your wifi driver is updated as well.

If you have an Internet Security app installed - remove it using the product manufacturer's removal tool

Regards. . .

jcgriff2

.

Read other 1 answers
RELEVANCY SCORE 118.8

Hi,
so this has happened before and without knowing what to do I re-installed Windows. Today it happened again and I would really like to know what causes the Driver Power State Failure BSoD.
Upon installing Windows Updates I needed to restart my Computer. Shutting down took about 20 minutes resulting in BSoD. It reset asking me if I wanted to start Windows normally, which I did, and gladly it started up again.
(The last time when I had to re-install Windows it didn't start up. Startup Repair, System Restore etc. failed. The Problem according to Windows was caused by new Software or Hardware neither of which was installed/added by me.)
I don't know how to find out which driver(s) cause(s) the problem, so any help would be very much appreciated!
I've attached the zipped files according to BSoD posting instructions.

A:Driver Power State Failure BSoD on Shutdown

Hey. Looking over your drivers quickly, I'd update these:


Code:
netw5v32 netw5v32.sys Thu Mar 26 12:10:37 2009
Rt86win7 Rt86win7.sys Thu Feb 26 04:04:22 2009
igdkmd32.sys Wed May 06 14:13:40 2009
Here is a link to the Realtek driver (if yours is : http://www.realtek.com.tw/downloads/...&GetDown=false

The netw5v32.sys is for a Wifi adapter, that you can visit Intel's website to locate a driver for.

igdkm32.sys is an Intel Graphics Kernal Mode driver. Intel's website will have that too.

http://www.intel.com/p/en_US/support...port_downloads

Failing these three updates to fix the problem, I suggest uninstalling AVG, if only as a temporary test, to see if that then fixes the problem.

Read other 3 answers
RELEVANCY SCORE 118.8

Hello,

I am getting a BSOD sometimes when I shut down my computer. My computer has to be on and idle for a while (close to 4 hours) for this to happen. I never put my computer to sleep or hibernate. Can anyone do a minidump check to see what is going on? I tried to do this myself but there is issues with the symbols. (Which one should I use for x64 Windows 7)

Thank you!

A:BSOD on Shutdown: DRIVER POWER STATE FAILURE

It's your Creative driver messing things up.

Update this:

ctaud2k.sys

Also, you should update this from motherboard wesbite:

ASACPI ASACPI.sys Sun Mar 27 22:30:36 2005

And these too:
Lycosa Lycosa.sys Fri Jan 18 03:51:42 2008
Lachesis Lachesis.sys Fri Aug 17 03:48:44 2007

Read other 6 answers
RELEVANCY SCORE 118

Hello and thanks for letting me post on this awesome forum!!!!

I am fixing a family members computer and it has stumped me. I have tried everything that I can find online related to my problem outside of reinstalling but I think it could be a hardware (power or memory) issue from what i read and a reinstall wouldnt fix it.

Driver_Power_State_Failure

I cannot trigger the BSoD of cue. Ive tried quite a bit, bringing it back from sleep, full load, no load, Skyrim, and different video cards.

I have been using Bluescreenviewer / myeventviewer to give me some incite but I couldn't find anything that would help my particular problem. So i present it to the people that know more then me, the online community. I followed the BSoD posting rules but let me know. Ill be checking back frequently.

Thanks again.

PS this computer is having raid issues. I get "Degraded NVIDIA mirror 931.51G" red flashing error for a couple seconds during boot. I dont know if this is related but BSoD's did not start at exactly the same time, but quite a bit of time after, I am told.

A:Random BSoD, Driver Power State Failure, reports blame ntoskrnl.exe

A few issues

1-asacpi.sys

The pre 2009 version of this driver is a known BSOD cause.





Quote:
Please visit this link: Asus tek computer inc. -support- drivers and download p7p55d le

ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. - Motherboards- ASUS P5K-VM

Scroll down to the utilities category, then scroll down to the "atk0110 driver for windowsxp/vista/windows 7 32&64-bit" (it's about the 12th item down).

Download and install it.

Go to c:\windows\system32\drivers to check and make sure that the asacpi.sys file is date stamped from 2009 or 2010 (not before).


2-These were all related to your NVIDIA nForce RAID Driver. Yours is from 2006. Update to current of remove.

3-Old drivers

Code:
ASACPI.sys 3/27/2005 10:30:36 PM
nvrd64.sys 11/10/2006 4:18:39 PM
SiWinAcc.sys 6/14/2007 8:02:02 PM
SiRemFil.sys 6/20/2007 3:42:10 PM
SI3132.sys 10/3/2007 2:39:29 PM
dump_nvstor64.sys 1/25/2008 11:01:22 PM
nvstor64.sys 1/25/2008 11:01:22 PM
nvm62x64.sys 10/17/2008 5:01:06 PM
How To Find Drivers:




Quote:
- search Google for the name of the driver
- compare the Google results with what's installed on your system to figure out which device/program it belongs to
- visit the web site of the manufacturer of the hardware/program to get the latest drivers (DON'T use Windows Update or the Update driver function of De... Read more

Read other 3 answers
RELEVANCY SCORE 117.6

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA8009DBD060
BCP3: FFFFF80000B9C518
BCP4: FFFFFA800ED33010
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\120410-48828-01.dmp
C:\Users\Jon\AppData\Local\Temp\WER-70980-0.sysdata.xml

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Yeah, i get this whenever my computer goes idle and into sleep mode, and when i shut down. Any way to fix???

minidump -- http://www.megaupload.com/?d=J07IWJQ0
 

Read other answers
RELEVANCY SCORE 117.6

just enquiring about a bsod of death prob on my hp DV7-3006tx entertainment PC. I hope you guys can give me some input on how i can fix my Blue Screen Problem. Any help would be much appreciated . You will find the minidump files attached thanks.

Attachment 60521

Thx in advance MiKe

A:Windows 7 BSOD Driver POwer State Failure upon shutdown

There's a couple of issues here that make this problematic to troubleshoot:

First is that there is an issue with the date/time stamps on your system files - so the Windows Debugging Tools aren't able to access symbols for your operating system files (in particular NTOSKRNL.EXE / NTKRNLMP.EXE / NTKRNLPA.EXE / NTKRPAMP.EXE) from the Microsoft Symbol Server - so that makes debugging them difficult if not impossible.

Please do the following:
- activate/validate the Windows installation at Genuine Microsoft Software
- run sfc.exe /scannow to replace any problem files
- If that doesn't fix it, then wipe the hard drive and reinstall Windows
- don't use "leaked"/torrent builds

Next is that it's an HP system - so there's a lot of older drivers that will need replacing (HP loads more drivers than may be needed for your system - HP DV4 Drivers ). The theory behind this is that the older drivers are more likely to be a problem - so replacing them is more likely to solve issues (In short, it's a guess). If it's an HP system that came with Windows 7 installed I tend to worry less about these drivers (because of the testing that HP puts the systems through).

So, please remove or update these older drivers that were loaded at the time of the crash. Don't use Windows Update or the Update drivers function of Device Manager.
Please use the following instructions to locate the most currently available drivers to replace the one's that you uninstall OR remove:




... Read more

Read other 1 answers
RELEVANCY SCORE 117.6

Hi fellas,

I've recently purchased a new prostar laptop(clevo), installed win7 pro x64 and everything has been running relatively painless so far. recently i've had two BSOD events during restart and shutdown. Not much else to report as far as issues go although my external hard drive stop registering in device manager or disk management. hard drive is tested on another laptop fine so i suspect sufficient power is not getting transferred through the usb to power the HD. not sure if related i just want to finish up the new machine without having regular BSOD's.

cheers

A:BSOD during either restart or shutdown. power driver state failure

Welcome to 7F.

1: AVG is causing issues.


Code:
fffff880`033cb2b8 fffff880`02d3a3cfUnable to load image \SystemRoot\system32\DRIVERS\avgtdia.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgtdia.sys
*** ERROR: Module load completed but symbols could not be loaded for avgtdia.sys
avgtdia+0x323cf

Code:
fffff880`0338b078 fffff880`03c1001aUnable to load image \SystemRoot\system32\DRIVERS\avgidsdrivera.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for avgidsdrivera.sys
*** ERROR: Module load completed but symbols could not be loaded for avgidsdrivera.sys
avgidsdrivera+0x1001a
Uninstall AVG and install MS Security Essentials and MalwareBytes.



   Note
Make sure you uncheck the 'Enable Free Trial' box when installing MalwareBytes.


2: Your nVidia driver has been flagged.


Code:
fffff880`033cb7f8 fffff880`0f21778eUnable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
nvlddmkm+0x1f178e

0: kd> lmvm nvlddmkm
start end module name
fffff880`0f026000 fffff880`0fcfa000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Sat Sep 13 20:59:50 2014 (5414A236)
CheckSum: 00C8E... Read more

Read other 4 answers